drm/i915: Use FLISDSI interface for band gap reset

v2: Rebased on latest code
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NYogesh Mohan Marimuthu <yogesh.mohan.marimuthu@intel.com>
Reviewed-by: Jani Nikula<jani.nikula@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

drivers/gpu/drm/i915/i915_drv.h

@@ -2475,6 +2475,8 @@ u32 intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg,
 		   enum intel_sbi_destination destination);
 void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
 		     enum intel_sbi_destination destination);
+u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg);
+void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val);
 
 int vlv_gpu_freq(struct drm_i915_private *dev_priv, int val);
 int vlv_freq_opcode(struct drm_i915_private *dev_priv, int val);

drivers/gpu/drm/i915/i915_reg.h

@@ -362,6 +362,7 @@
 #define   IOSF_PORT_CCK				0x14
 #define   IOSF_PORT_CCU				0xA9
 #define   IOSF_PORT_GPS_CORE			0x48
+#define   IOSF_PORT_FLISDSI			0x1B
 #define VLV_IOSF_DATA				(VLV_DISPLAY_BASE + 0x2104)
 #define VLV_IOSF_ADDR				(VLV_DISPLAY_BASE + 0x2108)
 

drivers/gpu/drm/i915/intel_dsi.c

@@ -37,49 +37,18 @@
 static const struct intel_dsi_device intel_dsi_devices[] = {
 };
 
-
-static void vlv_cck_modify(struct drm_i915_private *dev_priv, u32 reg, u32 val,
-			   u32 mask)
-{
-	u32 tmp = vlv_cck_read(dev_priv, reg);
-	tmp &= ~mask;
-	tmp |= val;
-	vlv_cck_write(dev_priv, reg, tmp);
-}
-
-static void band_gap_wa(struct drm_i915_private *dev_priv)
+static void band_gap_reset(struct drm_i915_private *dev_priv)
 {
 	mutex_lock(&dev_priv->dpio_lock);
 
-	/* Enable bandgap fix in GOP driver */
-	vlv_cck_modify(dev_priv, 0x6D, 0x00010000, 0x00030000);
-	msleep(20);
-	vlv_cck_modify(dev_priv, 0x6E, 0x00010000, 0x00030000);
-	msleep(20);
-	vlv_cck_modify(dev_priv, 0x6F, 0x00010000, 0x00030000);
-	msleep(20);
-	vlv_cck_modify(dev_priv, 0x00, 0x00008000, 0x00008000);
-	msleep(20);
-	vlv_cck_modify(dev_priv, 0x00, 0x00000000, 0x00008000);
-	msleep(20);
-
-	/* Turn Display Trunk on */
-	vlv_cck_modify(dev_priv, 0x6B, 0x00020000, 0x00030000);
-	msleep(20);
-
-	vlv_cck_modify(dev_priv, 0x6C, 0x00020000, 0x00030000);
-	msleep(20);
-
-	vlv_cck_modify(dev_priv, 0x6D, 0x00020000, 0x00030000);
-	msleep(20);
-	vlv_cck_modify(dev_priv, 0x6E, 0x00020000, 0x00030000);
-	msleep(20);
-	vlv_cck_modify(dev_priv, 0x6F, 0x00020000, 0x00030000);
+	vlv_flisdsi_write(dev_priv, 0x08, 0x0001);
+	vlv_flisdsi_write(dev_priv, 0x0F, 0x0005);
+	vlv_flisdsi_write(dev_priv, 0x0F, 0x0025);
+	udelay(150);
+	vlv_flisdsi_write(dev_priv, 0x0F, 0x0000);
+	vlv_flisdsi_write(dev_priv, 0x08, 0x0000);
 
 	mutex_unlock(&dev_priv->dpio_lock);
-
-	/* Need huge delay, otherwise clock is not stable */
-	msleep(100);
 }
 
 static struct intel_dsi *intel_attached_dsi(struct drm_connector *connector)
@@ -364,7 +333,7 @@ static void intel_dsi_mode_set(struct intel_encoder *intel_encoder)
 	vlv_enable_dsi_pll(intel_encoder);
 
 	/* XXX: Location of the call */
-	band_gap_wa(dev_priv);
+	band_gap_reset(dev_priv);
 
 	/* escape clock divider, 20MHz, shared for A and C. device ready must be
 	 * off when doing this! txclkesc? */

drivers/gpu/drm/i915/intel_sideband.c

@@ -249,3 +249,17 @@ void intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value,
 		return;
 	}
 }
+
+u32 vlv_flisdsi_read(struct drm_i915_private *dev_priv, u32 reg)
+{
+	u32 val = 0;
+	vlv_sideband_rw(dev_priv, DPIO_DEVFN, IOSF_PORT_FLISDSI,
+					DPIO_OPCODE_REG_READ, reg, &val);
+	return val;
+}
+
+void vlv_flisdsi_write(struct drm_i915_private *dev_priv, u32 reg, u32 val)
+{
+	vlv_sideband_rw(dev_priv, DPIO_DEVFN, IOSF_PORT_FLISDSI,
+					DPIO_OPCODE_REG_WRITE, reg, &val);
+}