usb-serial: possible irq lock inversion (PPP vs. usb/serial)

=========================================================
[ INFO: possible irq lock inversion dependency detected ]

drivers/usb/serial/cyberjack.c

@@ -214,14 +214,14 @@ static int cyberjack_write (struct usb_serial_port *port, const unsigned char *b
 		return (0);
 	}
 
-	spin_lock(&port->lock);
+	spin_lock_bh(&port->lock);
 	if (port->write_urb_busy) {
-		spin_unlock(&port->lock);
+		spin_unlock_bh(&port->lock);
 		dbg("%s - already writing", __FUNCTION__);
 		return 0;
 	}
 	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	spin_unlock_bh(&port->lock);
 
 	spin_lock_irqsave(&priv->lock, flags);
 

drivers/usb/serial/generic.c

@@ -175,14 +175,14 @@ int usb_serial_generic_write(struct usb_serial_port *port, const unsigned char *
 
 	/* only do something if we have a bulk out endpoint */
 	if (serial->num_bulk_out) {
-		spin_lock(&port->lock);
+		spin_lock_bh(&port->lock);
 		if (port->write_urb_busy) {
-			spin_unlock(&port->lock);
+			spin_unlock_bh(&port->lock);
 			dbg("%s - already writing", __FUNCTION__);
 			return 0;
 		}
 		port->write_urb_busy = 1;
-		spin_unlock(&port->lock);
+		spin_unlock_bh(&port->lock);
 
 		count = (count > port->bulk_out_size) ? port->bulk_out_size : count;
 

drivers/usb/serial/ipw.c

@@ -394,14 +394,14 @@ static int ipw_write(struct usb_serial_port *port, const unsigned char *buf, int
 		return 0;
 	}
 
-	spin_lock(&port->lock);
+	spin_lock_bh(&port->lock);
 	if (port->write_urb_busy) {
-		spin_unlock(&port->lock);
+		spin_unlock_bh(&port->lock);
 		dbg("%s - already writing", __FUNCTION__);
 		return 0;
 	}
 	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	spin_unlock_bh(&port->lock);
 
 	count = min(count, port->bulk_out_size);
 	memcpy(port->bulk_out_buffer, buf, count);

drivers/usb/serial/ir-usb.c

@@ -342,14 +342,14 @@ static int ir_write (struct usb_serial_port *port, const unsigned char *buf, int
 	if (count == 0)
 		return 0;
 
-	spin_lock(&port->lock);
+	spin_lock_bh(&port->lock);
 	if (port->write_urb_busy) {
-		spin_unlock(&port->lock);
+		spin_unlock_bh(&port->lock);
 		dbg("%s - already writing", __FUNCTION__);
 		return 0;
 	}
 	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	spin_unlock_bh(&port->lock);
 
 	transfer_buffer = port->write_urb->transfer_buffer;
 	transfer_size = min(count, port->bulk_out_size - 1);

drivers/usb/serial/keyspan_pda.c

@@ -518,13 +518,13 @@ static int keyspan_pda_write(struct usb_serial_port *port,
 	   the TX urb is in-flight (wait until it completes)
 	   the device is full (wait until it says there is room)
 	*/
-	spin_lock(&port->lock);
+	spin_lock_bh(&port->lock);
 	if (port->write_urb_busy || priv->tx_throttled) {
-		spin_unlock(&port->lock);
+		spin_unlock_bh(&port->lock);
 		return 0;
 	}
 	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	spin_unlock_bh(&port->lock);
 
 	/* At this point the URB is in our control, nobody else can submit it
 	   again (the only sudden transition was the one from EINPROGRESS to

drivers/usb/serial/omninet.c

@@ -256,14 +256,14 @@ static int omninet_write (struct usb_serial_port *port, const unsigned char *buf
 		return (0);
 	}
 
-	spin_lock(&wport->lock);
+	spin_lock_bh(&wport->lock);
 	if (wport->write_urb_busy) {
-		spin_unlock(&wport->lock);
+		spin_unlock_bh(&wport->lock);
 		dbg("%s - already writing", __FUNCTION__);
 		return 0;
 	}
 	wport->write_urb_busy = 1;
-	spin_unlock(&wport->lock);
+	spin_unlock_bh(&wport->lock);
 
 	count = (count > OMNINET_BULKOUTSIZE) ? OMNINET_BULKOUTSIZE : count;
 

drivers/usb/serial/safe_serial.c

@@ -298,14 +298,14 @@ static int safe_write (struct usb_serial_port *port, const unsigned char *buf, i
 		dbg ("%s - write request of 0 bytes", __FUNCTION__);
 		return (0);
 	}
-	spin_lock(&port->lock);
+	spin_lock_bh(&port->lock);
 	if (port->write_urb_busy) {
-		spin_unlock(&port->lock);
+		spin_unlock_bh(&port->lock);
 		dbg("%s - already writing", __FUNCTION__);
 		return 0;
 	}
 	port->write_urb_busy = 1;
-	spin_unlock(&port->lock);
+	spin_unlock_bh(&port->lock);
 
 	packet_length = port->bulk_out_size;	// get max packetsize