Merge tag 'omap-for-v4.10/fixes-rc4' of...

Merge tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps for v4.10-rc cycle. Mostly a DMA regression fix for
omap1, and then a handful of trivial fixes for boards and devices to
work:

- Fixes TI wilink bluetooth strange platform data baud rate
- Remove duplicate pinmux line for am335x-icev2
- Fix omap1 dma regression
- Fix uninitialized return value for wkup_m3_ipc_probe()
- Fix Ethernet PHY binding typo for dra72-evm
- Fix init for omap5 and dra7 sata ports
- Fix mmc card detect pin for Logic PD SOM-LV

* tag 'omap-for-v4.10/fixes-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: omap3: Fix Card Detect and Write Protect on Logic PD SOM-LV
  ARM: dts: OMAP5 / DRA7: indicate that SATA port 0 is available.
  ARM: dts: dra72-evm-revc: fix typo in ethernet-phy node
  soc: ti: wkup_m3_ipc: Fix error return code in wkup_m3_ipc_probe()
  ARM: OMAP1: DMA: Correct the number of logical channels
  ARM: dts: am335x-icev2: Remove the duplicated pinmux setting
  ARM: OMAP2+: Fix WL1283 Bluetooth Baud Rate
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/boot/dts/am335x-icev2.dts

@@ -170,7 +170,6 @@
 			AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
 			AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
 			AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
-			AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE5) /* (C15) spi0_cs1.mmc0_sdcd */
 		>;
 	};
 

arch/arm/boot/dts/dra7.dtsi

@@ -1378,6 +1378,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		rtc: rtc@48838000 {

arch/arm/boot/dts/dra72-evm-revc.dts

@@ -75,6 +75,6 @@
 		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 		ti,tx-internal-delay = <DP83867_RGMIIDCTL_250_PS>;
 		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
-		ti,min-output-imepdance;
+		ti,min-output-impedance;
 	};
 };

arch/arm/boot/dts/logicpd-som-lv-37xx-devkit.dts

@@ -158,7 +158,7 @@
 &mmc1 {
 	interrupts-extended = <&intc 83 &omap3_pmx_core 0x11a>;
 	pinctrl-names = "default";
-	pinctrl-0 = <&mmc1_pins &mmc1_cd>;
+	pinctrl-0 = <&mmc1_pins>;
 	wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>;		/* gpio_126 */
 	cd-gpios = <&gpio4 14 IRQ_TYPE_LEVEL_LOW>;		/* gpio_110 */
 	vmmc-supply = <&vmmc1>;
@@ -193,7 +193,8 @@
 			OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat1.sdmmc1_dat1 */
 			OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat2.sdmmc1_dat2 */
 			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT | MUX_MODE0)	/* sdmmc1_dat3.sdmmc1_dat3 */
-			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 sdmmc1_wp*/
+			OMAP3_CORE1_IOPAD(0x2132, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_strobe.gpio_126 */
+			OMAP3_CORE1_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
 		>;
 	};
 
@@ -242,12 +243,6 @@
 			OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | PIN_OFF_OUTPUT_LOW | MUX_MODE4)       /* sys_boot6.gpio_8 */
 		>;
 	};
-
-	mmc1_cd: pinmux_mmc1_cd {
-		pinctrl-single,pins = <
-			OMAP3_WKUP_IOPAD(0x212c, PIN_INPUT_PULLUP | MUX_MODE4)	/* cam_d11.gpio_110 */
-		>;
-	};
 };
 
 

arch/arm/boot/dts/omap5.dtsi

@@ -988,6 +988,7 @@
 			phy-names = "sata-phy";
 			clocks = <&sata_ref_clk>;
 			ti,hwmods = "sata";
+			ports-implemented = <0x1>;
 		};
 
 		dss: dss@58000000 {

arch/arm/mach-omap1/dma.c

@@ -32,7 +32,6 @@
 #include "soc.h"
 
 #define OMAP1_DMA_BASE			(0xfffed800)
-#define OMAP1_LOGICAL_DMA_CH_COUNT	17
 
 static u32 enable_1510_mode;
 
@@ -348,8 +347,6 @@ static int __init omap1_system_dma_init(void)
 		goto exit_iounmap;
 	}
 
-	d->lch_count		= OMAP1_LOGICAL_DMA_CH_COUNT;
-
 	/* Valid attributes for omap1 plus processors */
 	if (cpu_is_omap15xx())
 		d->dev_caps = ENABLE_1510_MODE;
@@ -366,13 +363,14 @@ static int __init omap1_system_dma_init(void)
 	d->dev_caps		|= CLEAR_CSR_ON_READ;
 	d->dev_caps		|= IS_WORD_16;
 
-	if (cpu_is_omap15xx())
-		d->chan_count = 9;
-	else if (cpu_is_omap16xx() || cpu_is_omap7xx()) {
-		if (!(d->dev_caps & ENABLE_1510_MODE))
-			d->chan_count = 16;
+	/* available logical channels */
+	if (cpu_is_omap15xx()) {
+		d->lch_count = 9;
+	} else {
+		if (d->dev_caps & ENABLE_1510_MODE)
+			d->lch_count = 9;
 		else
-			d->chan_count = 9;
+			d->lch_count = 16;
 	}
 
 	p = dma_plat_info;

arch/arm/mach-omap2/pdata-quirks.c

@@ -161,7 +161,7 @@ static struct ti_st_plat_data wilink7_pdata = {
 	.nshutdown_gpio = 162,
 	.dev_name = "/dev/ttyO1",
 	.flow_cntrl = 1,
-	.baud_rate = 300000,
+	.baud_rate = 3000000,
 };
 
 static struct platform_device wl128x_device = {

drivers/soc/ti/wkup_m3_ipc.c

@@ -459,6 +459,7 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev)
 
 	if (IS_ERR(task)) {
 		dev_err(dev, "can't create rproc_boot thread\n");
+		ret = PTR_ERR(task);
 		goto err_put_rproc;
 	}