提交 e1df057d 编写于 作者: F Florian Fainelli 提交者: Ralf Baechle

MIPS: AR7: Fix typo in ar7.h

This fixes a typo on the AR7_RESET_PERIPHERAL define.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: http://patchwork.linux-mips.org/patch/1247/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
上级 154615d5
无相关合并请求
......@@ -50,7 +50,7 @@
#define UR8_REGS_WDT (AR7_REGS_BASE + 0x0b00)
#define UR8_REGS_UART1 (AR7_REGS_BASE + 0x0f00)
#define AR7_RESET_PEREPHERIAL 0x0
#define AR7_RESET_PERIPHERAL 0x0
#define AR7_RESET_SOFTWARE 0x4
#define AR7_RESET_STATUS 0x8
......@@ -128,7 +128,7 @@ static inline int ar7_has_high_cpmac(void)
static inline void ar7_device_enable(u32 bit)
{
void *reset_reg =
(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
writel(readl(reset_reg) | (1 << bit), reset_reg);
msleep(20);
}
......@@ -136,7 +136,7 @@ static inline void ar7_device_enable(u32 bit)
static inline void ar7_device_disable(u32 bit)
{
void *reset_reg =
(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PEREPHERIAL);
(void *)KSEG1ADDR(AR7_REGS_RESET + AR7_RESET_PERIPHERAL);
writel(readl(reset_reg) & ~(1 << bit), reset_reg);
msleep(20);
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册
反馈
建议
客服 返回
顶部