docs-rst: fix usb cross-references

As some USB documentation files got moved, adjust their
cross-references to their new place.
Signed-off-by: NMauro Carvalho Chehab <mchehab@s-opensource.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJonathan Corbet <corbet@lwn.net>

Documentation/ABI/stable/sysfs-bus-usb

@@ -9,7 +9,7 @@ Description:
 		hubs this facility is always enabled and their device
 		directories will not contain this file.
 
-		For more information, see Documentation/usb/persist.txt.
+		For more information, see Documentation/driver-api/usb/persist.rst.
 
 What:		/sys/bus/usb/devices/.../power/autosuspend
 Date:		March 2007

Documentation/driver-api/usb/URB.rst

+.. _usb-urb:
+
 USB Request Block (URB)
 ~~~~~~~~~~~~~~~~~~~~~~~
 

Documentation/driver-api/usb/callbacks.rst

@@ -8,7 +8,7 @@ Usbcore will call into a driver through callbacks defined in the driver
 structure and through the completion handler of URBs a driver submits.
 Only the former are in the scope of this document. These two kinds of
 callbacks are completely independent of each other. Information on the
-completion callback can be found in Documentation/usb/URB.txt.
+completion callback can be found in :ref:`usb-urb`.
 
 The callbacks defined in the driver structure are:
 
@@ -53,7 +53,7 @@ The callbacks defined in the driver structure are:
 
 The ioctl interface (2) should be used only if you have a very good
 reason. Sysfs is preferred these days. The PM callbacks are covered
-separately in Documentation/usb/power-management.txt.
+separately in :ref:`usb-power-management`.
 
 Calling conventions
 ===================

Documentation/driver-api/usb/error-codes.rst

+.. _usb-error-codes:
+
 USB Error codes
 ~~~~~~~~~~~~~~~
 

Documentation/driver-api/usb/persist.rst

+.. _usb-persist:
+
 USB device persistence during system suspend
 ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 

Documentation/driver-api/usb/power-management.rst

@@ -328,7 +328,7 @@ possible to work around the hibernation-forces-disconnect problem by
 using the USB Persist facility.)
 
 The ``reset_resume`` method is used by the USB Persist facility (see
-``Documentation/usb/persist.txt``) and it can also be used under certain
+:ref:`usb-persist`) and it can also be used under certain
 circumstances when ``CONFIG_USB_PERSIST`` is not enabled.  Currently, if a
 device is reset during a resume and the driver does not have a
 ``reset_resume`` method, the driver won't receive any notification about

Documentation/driver-api/usb/usb.rst

@@ -424,8 +424,8 @@ header.
 Unless noted otherwise, the ioctl requests described here will update
 the modification time on the usbfs file to which they are applied
 (unless they fail). A return of zero indicates success; otherwise, a
-standard USB error code is returned. (These are documented in
-``Documentation/usb/error-codes.txt`` in your kernel sources.)
+standard USB error code is returned (These are documented in
+:ref:`usb-error-codes`).
 
 Each of these files multiplexes access to several I/O streams, one per
 endpoint. Each device has one control endpoint (endpoint zero) which

Documentation/power/swsusp.txt

@@ -406,7 +406,7 @@ Firewire, CompactFlash, MMC, external SATA, or even IDE hotplug bays)
 before suspending; then remount them after resuming.
 
 There is a work-around for this problem.  For more information, see
-Documentation/usb/persist.txt.
+Documentation/driver-api/usb/persist.rst.
 
 Q: Can I suspend-to-disk using a swap partition under LVM?
 

drivers/staging/most/hdm-usb/hdm_usb.c

@@ -490,7 +490,7 @@ static void hdm_write_completion(struct urb *urb)
  * disconnect.  In the interval before the hub driver starts disconnect
  * processing, devices may receive such fault reports for every request.
  *
- * See <https://www.kernel.org/doc/Documentation/usb/error-codes.txt>
+ * See <https://www.kernel.org/doc/Documentation/driver-api/usb/error-codes.rst>
  */
 static void hdm_read_completion(struct urb *urb)
 {

drivers/usb/core/Kconfig

@@ -26,7 +26,7 @@ config USB_DEFAULT_PERSIST
 	  unplugged, causing any mounted filesystems to be lost.  The
 	  persist feature can still be enabled for individual devices
 	  through the power/persist sysfs node. See
-	  Documentation/usb/persist.txt for more info.
+	  Documentation/driver-api/usb/persist.rst for more info.
 
 	  If you have any questions about this, say Y here, only say N
 	  if you know exactly what you are doing.