Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 e014991d 编写于 作者: D Dean Luick 提交者： Doug Ledford
浏览文件
操作

IB/hfi1: Remove TWSI references 

Remove the TWSI code.  The driver now uses the kernel's built-in
i2c bit bus module.

Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Reviewed-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>
上级 dba715f0
隐藏空白更改
内联 并排
Showing with 1 addition and 588 deletion
drivers/infiniband/hw/hfi1/Makefile
浏览文件 @ e014991d
...@@ -10,7 +10,7 @@ obj-$(CONFIG_INFINIBAND_HFI1) += hfi1.o ...@@ -10,7 +10,7 @@ obj-$(CONFIG_INFINIBAND_HFI1) += hfi1.o
hfi1-y := affinity.o chip.o device.o driver.o efivar.o \ hfi1-y := affinity.o chip.o device.o driver.o efivar.o \
eprom.o file_ops.o firmware.o \ eprom.o file_ops.o firmware.o \
init.o intr.o mad.o mmu_rb.o pcie.o pio.o pio_copy.o platform.o \ init.o intr.o mad.o mmu_rb.o pcie.o pio.o pio_copy.o platform.o \
qp.o qsfp.o rc.o ruc.o sdma.o sysfs.o trace.o twsi.o \ qp.o qsfp.o rc.o ruc.o sdma.o sysfs.o trace.o \
uc.o ud.o user_exp_rcv.o user_pages.o user_sdma.o verbs.o \ uc.o ud.o user_exp_rcv.o user_pages.o user_sdma.o verbs.o \
verbs_txreq.o verbs_txreq.o
hfi1-$(CONFIG_DEBUG_FS) += debugfs.o hfi1-$(CONFIG_DEBUG_FS) += debugfs.o
......
drivers/infiniband/hw/hfi1/chip.c
浏览文件 @ e014991d
...@@ -12349,37 +12349,6 @@ u8 hfi1_ibphys_portstate(struct hfi1_pportdata *ppd) ...@@ -12349,37 +12349,6 @@ u8 hfi1_ibphys_portstate(struct hfi1_pportdata *ppd)
return ib_pstate; return ib_pstate;
} }
/*
* Read/modify/write ASIC_QSFP register bits as selected by mask
* data: 0 or 1 in the positions depending on what needs to be written
* dir: 0 for read, 1 for write
* mask: select by setting
* I2CCLK (bit 0)
* I2CDATA (bit 1)
*/
u64 hfi1_gpio_mod(struct hfi1_devdata *dd, u32 target, u32 data, u32 dir,
u32 mask)
{
u64 qsfp_oe, target_oe;
target_oe = target ? ASIC_QSFP2_OE : ASIC_QSFP1_OE;
if (mask) {
/* We are writing register bits, so lock access */
dir &= mask;
data &= mask;
qsfp_oe = read_csr(dd, target_oe);
qsfp_oe = (qsfp_oe & ~(u64)mask) | (u64)dir;
write_csr(dd, target_oe, qsfp_oe);
}
/* We are exclusively reading bits here, but it is unlikely
* we'll get valid data when we set the direction of the pin
* in the same call, so read should call this function again
* to get valid data
*/
return read_csr(dd, target ? ASIC_QSFP2_IN : ASIC_QSFP1_IN);
}
#define CLEAR_STATIC_RATE_CONTROL_SMASK(r) \ #define CLEAR_STATIC_RATE_CONTROL_SMASK(r) \
(r &= ~SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK) (r &= ~SEND_CTXT_CHECK_ENABLE_DISALLOW_PBC_STATIC_RATE_CONTROL_SMASK)
......
drivers/infiniband/hw/hfi1/chip.h
浏览文件 @ e014991d
...@@ -1338,8 +1338,6 @@ struct hfi1_message_header *hfi1_get_msgheader( ...@@ -1338,8 +1338,6 @@ struct hfi1_message_header *hfi1_get_msgheader(
struct hfi1_devdata *dd, __le32 *rhf_addr); struct hfi1_devdata *dd, __le32 *rhf_addr);
int hfi1_get_base_kinfo(struct hfi1_ctxtdata *rcd, int hfi1_get_base_kinfo(struct hfi1_ctxtdata *rcd,
struct hfi1_ctxt_info *kinfo); struct hfi1_ctxt_info *kinfo);
u64 hfi1_gpio_mod(struct hfi1_devdata *dd, u32 target, u32 data, u32 dir,
u32 mask);
int hfi1_init_ctxt(struct send_context *sc); int hfi1_init_ctxt(struct send_context *sc);
void hfi1_put_tid(struct hfi1_devdata *dd, u32 index, void hfi1_put_tid(struct hfi1_devdata *dd, u32 index,
u32 type, unsigned long pa, u16 order); u32 type, unsigned long pa, u16 order);
......
drivers/infiniband/hw/hfi1/twsi.c 已删除 100644 → 0
浏览文件 @ dba715f0
/*
* Copyright(c) 2015, 2016 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* BSD LICENSE
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include "hfi.h"
#include "twsi.h"
/*
* "Two Wire Serial Interface" support.
*
* Originally written for a not-quite-i2c serial eeprom, which is
* still used on some supported boards. Later boards have added a
* variety of other uses, most board-specific, so the bit-boffing
* part has been split off to this file, while the other parts
* have been moved to chip-specific files.
*
* We have also dropped all pretense of fully generic (e.g. pretend
* we don't know whether '1' is the higher voltage) interface, as
* the restrictions of the generic i2c interface (e.g. no access from
* driver itself) make it unsuitable for this use.
*/
#define READ_CMD 1
#define WRITE_CMD 0
/**
* i2c_wait_for_writes - wait for a write
* @dd: the hfi1_ib device
*
* We use this instead of udelay directly, so we can make sure
* that previous register writes have been flushed all the way
* to the chip. Since we are delaying anyway, the cost doesn't
* hurt, and makes the bit twiddling more regular
*/
static void i2c_wait_for_writes(struct hfi1_devdata *dd, u32 target)
{
/*
* implicit read of EXTStatus is as good as explicit
* read of scratch, if all we want to do is flush
* writes.
*/
hfi1_gpio_mod(dd, target, 0, 0, 0);
rmb(); /* inlined, so prevent compiler reordering */
}
/*
* QSFP modules are allowed to hold SCL low for 500uSec. Allow twice that
* for "almost compliant" modules
*/
#define SCL_WAIT_USEC 1000
/* BUF_WAIT is time bus must be free between STOP or ACK and to next START.
* Should be 20, but some chips need more.
*/
#define TWSI_BUF_WAIT_USEC 60
static void scl_out(struct hfi1_devdata *dd, u32 target, u8 bit)
{
u32 mask;
udelay(1);
mask = QSFP_HFI0_I2CCLK;
/* SCL is meant to be bare-drain, so never set "OUT", just DIR */
hfi1_gpio_mod(dd, target, 0, bit ? 0 : mask, mask);
/*
* Allow for slow slaves by simple
* delay for falling edge, sampling on rise.
*/
if (!bit) {
udelay(2);
} else {
int rise_usec;
for (rise_usec = SCL_WAIT_USEC; rise_usec > 0; rise_usec -= 2) {
if (mask & hfi1_gpio_mod(dd, target, 0, 0, 0))
break;
udelay(2);
}
if (rise_usec <= 0)
dd_dev_err(dd, "SCL interface stuck low > %d uSec\n",
SCL_WAIT_USEC);
}
i2c_wait_for_writes(dd, target);
}
static u8 scl_in(struct hfi1_devdata *dd, u32 target, int wait)
{
u32 read_val, mask;
mask = QSFP_HFI0_I2CCLK;
/* SCL is meant to be bare-drain, so never set "OUT", just DIR */
hfi1_gpio_mod(dd, target, 0, 0, mask);
read_val = hfi1_gpio_mod(dd, target, 0, 0, 0);
if (wait)
i2c_wait_for_writes(dd, target);
return (read_val & mask) >> GPIO_SCL_NUM;
}
static void sda_out(struct hfi1_devdata *dd, u32 target, u8 bit)
{
u32 mask;
mask = QSFP_HFI0_I2CDAT;
/* SDA is meant to be bare-drain, so never set "OUT", just DIR */
hfi1_gpio_mod(dd, target, 0, bit ? 0 : mask, mask);
i2c_wait_for_writes(dd, target);
udelay(2);
}
static u8 sda_in(struct hfi1_devdata *dd, u32 target, int wait)
{
u32 read_val, mask;
mask = QSFP_HFI0_I2CDAT;
/* SDA is meant to be bare-drain, so never set "OUT", just DIR */
hfi1_gpio_mod(dd, target, 0, 0, mask);
read_val = hfi1_gpio_mod(dd, target, 0, 0, 0);
if (wait)
i2c_wait_for_writes(dd, target);
return (read_val & mask) >> GPIO_SDA_NUM;
}
/**
* i2c_ackrcv - see if ack following write is true
* @dd: the hfi1_ib device
*/
static int i2c_ackrcv(struct hfi1_devdata *dd, u32 target)
{
u8 ack_received;
/* AT ENTRY SCL = LOW */
/* change direction, ignore data */
ack_received = sda_in(dd, target, 1);
scl_out(dd, target, 1);
ack_received = sda_in(dd, target, 1) == 0;
scl_out(dd, target, 0);
return ack_received;
}
static void stop_cmd(struct hfi1_devdata *dd, u32 target);
/**
* rd_byte - read a byte, sending STOP on last, else ACK
* @dd: the hfi1_ib device
*
* Returns byte shifted out of device
*/
static int rd_byte(struct hfi1_devdata *dd, u32 target, int last)
{
int bit_cntr, data;
data = 0;
for (bit_cntr = 7; bit_cntr >= 0; --bit_cntr) {
data <<= 1;
scl_out(dd, target, 1);
data |= sda_in(dd, target, 0);
scl_out(dd, target, 0);
}
if (last) {
scl_out(dd, target, 1);
stop_cmd(dd, target);
} else {
sda_out(dd, target, 0);
scl_out(dd, target, 1);
scl_out(dd, target, 0);
sda_out(dd, target, 1);
}
return data;
}
/**
* wr_byte - write a byte, one bit at a time
* @dd: the hfi1_ib device
* @data: the byte to write
*
* Returns 0 if we got the following ack, otherwise 1
*/
static int wr_byte(struct hfi1_devdata *dd, u32 target, u8 data)
{
int bit_cntr;
u8 bit;
for (bit_cntr = 7; bit_cntr >= 0; bit_cntr--) {
bit = (data >> bit_cntr) & 1;
sda_out(dd, target, bit);
scl_out(dd, target, 1);
scl_out(dd, target, 0);
}
return (!i2c_ackrcv(dd, target)) ? 1 : 0;
}
/*
* issue TWSI start sequence:
* (both clock/data high, clock high, data low while clock is high)
*/
static void start_seq(struct hfi1_devdata *dd, u32 target)
{
sda_out(dd, target, 1);
scl_out(dd, target, 1);
sda_out(dd, target, 0);
udelay(1);
scl_out(dd, target, 0);
}
/**
* stop_seq - transmit the stop sequence
* @dd: the hfi1_ib device
*
* (both clock/data low, clock high, data high while clock is high)
*/
static void stop_seq(struct hfi1_devdata *dd, u32 target)
{
scl_out(dd, target, 0);
sda_out(dd, target, 0);
scl_out(dd, target, 1);
sda_out(dd, target, 1);
}
/**
* stop_cmd - transmit the stop condition
* @dd: the hfi1_ib device
*
* (both clock/data low, clock high, data high while clock is high)
*/
static void stop_cmd(struct hfi1_devdata *dd, u32 target)
{
stop_seq(dd, target);
udelay(TWSI_BUF_WAIT_USEC);
}
/**
* hfi1_twsi_reset - reset I2C communication
* @dd: the hfi1_ib device
* returns 0 if ok, -EIO on error
*/
int hfi1_twsi_reset(struct hfi1_devdata *dd, u32 target)
{
int clock_cycles_left = 9;
u32 mask;
/* Both SCL and SDA should be high. If not, there
* is something wrong.
*/
mask = QSFP_HFI0_I2CCLK | QSFP_HFI0_I2CDAT;
/*
* Force pins to desired innocuous state.
* This is the default power-on state with out=0 and dir=0,
* So tri-stated and should be floating high (barring HW problems)
*/
hfi1_gpio_mod(dd, target, 0, 0, mask);
/* Check if SCL is low, if it is low then we have a slave device
* misbehaving and there is not much we can do.
*/
if (!scl_in(dd, target, 0))
return -EIO;
/* Check if SDA is low, if it is low then we have to clock SDA
* up to 9 times for the device to release the bus
*/
while (clock_cycles_left--) {
if (sda_in(dd, target, 0))
return 0;
scl_out(dd, target, 0);
scl_out(dd, target, 1);
}
return -EIO;
}
#define HFI1_TWSI_START 0x100
#define HFI1_TWSI_STOP 0x200
/* Write byte to TWSI, optionally prefixed with START or suffixed with
* STOP.
* returns 0 if OK (ACK received), else != 0
*/
static int twsi_wr(struct hfi1_devdata *dd, u32 target, int data, int flags)
{
int ret = 1;
if (flags & HFI1_TWSI_START)
start_seq(dd, target);
/* Leaves SCL low (from i2c_ackrcv()) */
ret = wr_byte(dd, target, data);
if (flags & HFI1_TWSI_STOP)
stop_cmd(dd, target);
return ret;
}
/* Added functionality for IBA7220-based cards */
#define HFI1_TEMP_DEV 0x98
/*
* hfi1_twsi_blk_rd
* General interface for data transfer from twsi devices.
* One vestige of its former role is that it recognizes a device
* HFI1_TWSI_NO_DEV and does the correct operation for the legacy part,
* which responded to all TWSI device codes, interpreting them as
* address within device. On all other devices found on board handled by
* this driver, the device is followed by a N-byte "address" which selects
* the "register" or "offset" within the device from which data should
* be read.
*/
int hfi1_twsi_blk_rd(struct hfi1_devdata *dd, u32 target, int dev, int addr,
void *buffer, int len)
{
u8 *bp = buffer;
int ret = 1;
int i;
int offset_size;
/* obtain the offset size, strip it from the device address */
offset_size = (dev >> 8) & 0xff;
dev &= 0xff;
/* allow at most a 2 byte offset */
if (offset_size > 2)
goto bail;
if (dev == HFI1_TWSI_NO_DEV) {
/* legacy not-really-I2C */
addr = (addr << 1) | READ_CMD;
ret = twsi_wr(dd, target, addr, HFI1_TWSI_START);
} else {
/* Actual I2C */
if (offset_size) {
ret = twsi_wr(dd, target,
dev | WRITE_CMD, HFI1_TWSI_START);
if (ret) {
stop_cmd(dd, target);
goto bail;
}
for (i = 0; i < offset_size; i++) {
ret = twsi_wr(dd, target,
(addr >> (i * 8)) & 0xff, 0);
udelay(TWSI_BUF_WAIT_USEC);
if (ret) {
dd_dev_err(dd, "Failed to write byte %d of offset 0x%04X\n",
i, addr);
goto bail;
}
}
}
ret = twsi_wr(dd, target, dev | READ_CMD, HFI1_TWSI_START);
}
if (ret) {
stop_cmd(dd, target);
goto bail;
}
/*
* block devices keeps clocking data out as long as we ack,
* automatically incrementing the address. Some have "pages"
* whose boundaries will not be crossed, but the handling
* of these is left to the caller, who is in a better
* position to know.
*/
while (len-- > 0) {
/*
* Get and store data, sending ACK if length remaining,
* else STOP
*/
*bp++ = rd_byte(dd, target, !len);
}
ret = 0;
bail:
return ret;
}
/*
* hfi1_twsi_blk_wr
* General interface for data transfer to twsi devices.
* One vestige of its former role is that it recognizes a device
* HFI1_TWSI_NO_DEV and does the correct operation for the legacy part,
* which responded to all TWSI device codes, interpreting them as
* address within device. On all other devices found on board handled by
* this driver, the device is followed by a N-byte "address" which selects
* the "register" or "offset" within the device to which data should
* be written.
*/
int hfi1_twsi_blk_wr(struct hfi1_devdata *dd, u32 target, int dev, int addr,
const void *buffer, int len)
{
const u8 *bp = buffer;
int ret = 1;
int i;
int offset_size;
/* obtain the offset size, strip it from the device address */
offset_size = (dev >> 8) & 0xff;
dev &= 0xff;
/* allow at most a 2 byte offset */
if (offset_size > 2)
goto bail;
if (dev == HFI1_TWSI_NO_DEV) {
if (twsi_wr(dd, target, (addr << 1) | WRITE_CMD,
HFI1_TWSI_START)) {
goto failed_write;
}
} else {
/* Real I2C */
if (twsi_wr(dd, target, dev | WRITE_CMD, HFI1_TWSI_START))
goto failed_write;
}
for (i = 0; i < offset_size; i++) {
ret = twsi_wr(dd, target, (addr >> (i * 8)) & 0xff, 0);
udelay(TWSI_BUF_WAIT_USEC);
if (ret) {
dd_dev_err(dd, "Failed to write byte %d of offset 0x%04X\n",
i, addr);
goto bail;
}
}
for (i = 0; i < len; i++)
if (twsi_wr(dd, target, *bp++, 0))
goto failed_write;
ret = 0;
failed_write:
stop_cmd(dd, target);
bail:
return ret;
}
drivers/infiniband/hw/hfi1/twsi.h 已删除 100644 → 0
浏览文件 @ dba715f0
#ifndef _TWSI_H
#define _TWSI_H
/*
* Copyright(c) 2015, 2016 Intel Corporation.
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* BSD LICENSE
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* - Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* - Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#define HFI1_TWSI_NO_DEV 0xFF
struct hfi1_devdata;
/* Bit position of SDA/SCL pins in ASIC_QSFP* registers */
#define GPIO_SDA_NUM 1
#define GPIO_SCL_NUM 0
/* these functions must be called with qsfp_lock held */
int hfi1_twsi_reset(struct hfi1_devdata *dd, u32 target);
int hfi1_twsi_blk_rd(struct hfi1_devdata *dd, u32 target, int dev, int addr,
void *buffer, int len);
int hfi1_twsi_blk_wr(struct hfi1_devdata *dd, u32 target, int dev, int addr,
const void *buffer, int len);
#endif /* _TWSI_H */
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或