[POWERPC] 86xx: Add uli1575 pci-bridge sector to MPC8641HPCN dts file.

This adds device nodes for the PCI bridges as well as the ISA devices on
the newer revision MPC8641HPCN.  It also adds the PCI ranges to the soc
node so that address translation for the ISA devices works properly.
Signed-off-by: NWade Farnsworth <wfarnsworth@mvista.com>
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

arch/powerpc/boot/dts/mpc8641_hpcn.dts

@@ -56,8 +56,12 @@
 		#size-cells = <1>;
 		#interrupt-cells = <2>;
 		device_type = "soc";
-		ranges = <0 f8000000 00100000>;
-		reg = <f8000000 00100000>;	// CCSRBAR 1M
+		ranges = <00001000 f8001000 000ff000
+			  80000000 80000000 20000000
+			  e2000000 e2000000 00100000
+			  a0000000 a0000000 20000000
+			  e3000000 e3000000 00100000>;
+		reg = <f8000000 00001000>;	// CCSRBAR
 		bus-frequency = <0>;
 
 		i2c@3000 {
@@ -285,17 +289,84 @@
 				f800 0 0 3 &i8259 0 0
 				f800 0 0 4 &i8259 0 0
 				>;
-			i8259: i8259@4d0 {
-				clock-frequency = <0>;
-				interrupt-controller;
-				device_type = "interrupt-controller";
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				built-in;
-				compatible = "chrp,iic";
-                	        big-endian;
-				interrupts = <49 2>;
-				interrupt-parent = <&mpic>;
+			uli1575@0 {
+				reg = <0 0 0 0 0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <02000000 0 80000000
+					  02000000 0 80000000
+					  0 20000000
+					  01000000 0 00000000
+					  01000000 0 00000000
+					  0 00100000>;
+
+				pci_bridge@0 {
+					reg = <0 0 0 0 0>;
+					#size-cells = <2>;
+					#address-cells = <3>;
+					ranges = <02000000 0 80000000
+						  02000000 0 80000000
+						  0 20000000
+						  01000000 0 00000000
+						  01000000 0 00000000
+						  0 00100000>;
+
+					isa@1e {
+						device_type = "isa";
+						#interrupt-cells = <2>;
+						#size-cells = <1>;
+						#address-cells = <2>;
+						reg = <f000 0 0 0 0>;
+						ranges = <1 0 01000000 0 0
+							  00001000>;
+						interrupt-parent = <&i8259>;
+
+						i8259: interrupt-controller@20 {
+							reg = <1 20 2
+							       1 a0 2
+							       1 4d0 2>;
+							clock-frequency = <0>;
+							interrupt-controller;
+							device_type = "interrupt-controller";
+							#address-cells = <0>;
+							#interrupt-cells = <2>;
+							built-in;
+							compatible = "chrp,iic";
+							interrupts = <49 2>;
+							interrupt-parent =
+								<&mpic>;
+						};
+
+						i8042@60 {
+							#size-cells = <0>;
+							#address-cells = <1>;
+							reg = <1 60 1 1 64 1>;
+							interrupts = <1 3 c 3>;
+							interrupt-parent =
+								<&i8259>;
+
+							keyboard@0 {
+								reg = <0>;
+								compatible = "pnpPNP,303";
+							};
+
+							mouse@1 {
+								reg = <1>;
+								compatible = "pnpPNP,f03";
+							};
+						};
+
+						rtc@70 {
+							compatible =
+								"pnpPNP,b00";
+							reg = <1 70 2>;
+						};
+
+						gpio@400 {
+							reg = <1 400 80>;
+						};
+					};
+				};
 			};
 
 		};