Merge branch 'topic/pl08x' into for-linus

drivers/dma/amba-pl08x.c

@@ -106,6 +106,7 @@ struct pl08x_driver_data;
 
 /**
  * struct vendor_data - vendor-specific config parameters for PL08x derivatives
+ * @config_offset: offset to the configuration register
  * @channels: the number of channels available in this variant
  * @signals: the number of request signals available from the hardware
  * @dualmaster: whether this version supports dual AHB masters or not.
@@ -145,6 +146,8 @@ struct pl08x_bus_data {
 /**
  * struct pl08x_phy_chan - holder for the physical channels
  * @id: physical index to this channel
+ * @base: memory base address for this physical channel
+ * @reg_config: configuration address for this physical channel
  * @lock: a lock to use when altering an instance of this struct
  * @serving: the virtual channel currently being served by this physical
  * channel
@@ -203,7 +206,7 @@ struct pl08x_txd {
 };
 
 /**
- * struct pl08x_dma_chan_state - holds the PL08x specific virtual channel
+ * enum pl08x_dma_chan_state - holds the PL08x specific virtual channel
  * states
  * @PL08X_CHAN_IDLE: the channel is idle
  * @PL08X_CHAN_RUNNING: the channel has allocated a physical transport
@@ -226,9 +229,8 @@ enum pl08x_dma_chan_state {
  * @phychan: the physical channel utilized by this channel, if there is one
  * @name: name of channel
  * @cd: channel platform data
- * @runtime_addr: address for RX/TX according to the runtime config
+ * @cfg: slave configuration
  * @at: active transaction on this channel
- * @lock: a lock for this channel data
  * @host: a pointer to the host (internal use)
  * @state: whether the channel is idle, paused, running etc
  * @slave: whether this channel is a device (slave) or for memcpy
@@ -262,7 +264,7 @@ struct pl08x_dma_chan {
  * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI
  * fetches
  * @mem_buses: set to indicate memory transfers on AHB2.
- * @lock: a spinlock for this struct
+ * @lli_words: how many words are used in each LLI item for this variant
  */
 struct pl08x_driver_data {
 	struct dma_device slave;
@@ -417,7 +419,7 @@ static void pl08x_start_next_txd(struct pl08x_dma_chan *plchan)
 
 	/* Enable the DMA channel */
 	/* Do not access config register until channel shows as disabled */
-	while (readl(pl08x->base + PL080_EN_CHAN) & (1 << phychan->id))
+	while (readl(pl08x->base + PL080_EN_CHAN) & BIT(phychan->id))
 		cpu_relax();
 
 	/* Do not access config register until channel shows as inactive */
@@ -484,8 +486,8 @@ static void pl08x_terminate_phy_chan(struct pl08x_driver_data *pl08x,
 
 	writel(val, ch->reg_config);
 
-	writel(1 << ch->id, pl08x->base + PL080_ERR_CLEAR);
-	writel(1 << ch->id, pl08x->base + PL080_TC_CLEAR);
+	writel(BIT(ch->id), pl08x->base + PL080_ERR_CLEAR);
+	writel(BIT(ch->id), pl08x->base + PL080_TC_CLEAR);
 }
 
 static inline u32 get_bytes_in_cctl(u32 cctl)
@@ -1834,7 +1836,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
 		return IRQ_NONE;
 
 	for (i = 0; i < pl08x->vd->channels; i++) {
-		if (((1 << i) & err) || ((1 << i) & tc)) {
+		if ((BIT(i) & err) || (BIT(i) & tc)) {
 			/* Locate physical channel */
 			struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i];
 			struct pl08x_dma_chan *plchan = phychan->serving;
@@ -1872,7 +1874,7 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
 			}
 			spin_unlock(&plchan->vc.lock);
 
-			mask |= (1 << i);
+			mask |= BIT(i);
 		}
 	}
 

include/linux/amba/pl080.h

@@ -38,24 +38,16 @@
 #define PL080_SOFT_LSREQ			(0x2C)
 
 #define PL080_CONFIG				(0x30)
-#define PL080_CONFIG_M2_BE			(1 << 2)
-#define PL080_CONFIG_M1_BE			(1 << 1)
-#define PL080_CONFIG_ENABLE			(1 << 0)
+#define PL080_CONFIG_M2_BE			BIT(2)
+#define PL080_CONFIG_M1_BE			BIT(1)
+#define PL080_CONFIG_ENABLE			BIT(0)
 
 #define PL080_SYNC				(0x34)
 
 /* Per channel configuration registers */
 
-#define PL080_Cx_STRIDE				(0x20)
+/* Per channel configuration registers */
 #define PL080_Cx_BASE(x)			((0x100 + (x * 0x20)))
-#define PL080_Cx_SRC_ADDR(x)			((0x100 + (x * 0x20)))
-#define PL080_Cx_DST_ADDR(x)			((0x104 + (x * 0x20)))
-#define PL080_Cx_LLI(x)				((0x108 + (x * 0x20)))
-#define PL080_Cx_CONTROL(x)			((0x10C + (x * 0x20)))
-#define PL080_Cx_CONFIG(x)			((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONTROL2(x)			((0x110 + (x * 0x20)))
-#define PL080S_Cx_CONFIG(x)			((0x114 + (x * 0x20)))
-
 #define PL080_CH_SRC_ADDR			(0x00)
 #define PL080_CH_DST_ADDR			(0x04)
 #define PL080_CH_LLI				(0x08)
@@ -66,18 +58,18 @@
 
 #define PL080_LLI_ADDR_MASK			(0x3fffffff << 2)
 #define PL080_LLI_ADDR_SHIFT			(2)
-#define PL080_LLI_LM_AHB2			(1 << 0)
+#define PL080_LLI_LM_AHB2			BIT(0)
 
-#define PL080_CONTROL_TC_IRQ_EN			(1 << 31)
+#define PL080_CONTROL_TC_IRQ_EN			BIT(31)
 #define PL080_CONTROL_PROT_MASK			(0x7 << 28)
 #define PL080_CONTROL_PROT_SHIFT		(28)
-#define PL080_CONTROL_PROT_CACHE		(1 << 30)
-#define PL080_CONTROL_PROT_BUFF			(1 << 29)
-#define PL080_CONTROL_PROT_SYS			(1 << 28)
-#define PL080_CONTROL_DST_INCR			(1 << 27)
-#define PL080_CONTROL_SRC_INCR			(1 << 26)
-#define PL080_CONTROL_DST_AHB2			(1 << 25)
-#define PL080_CONTROL_SRC_AHB2			(1 << 24)
+#define PL080_CONTROL_PROT_CACHE		BIT(30)
+#define PL080_CONTROL_PROT_BUFF			BIT(29)
+#define PL080_CONTROL_PROT_SYS			BIT(28)
+#define PL080_CONTROL_DST_INCR			BIT(27)
+#define PL080_CONTROL_SRC_INCR			BIT(26)
+#define PL080_CONTROL_DST_AHB2			BIT(25)
+#define PL080_CONTROL_SRC_AHB2			BIT(24)
 #define PL080_CONTROL_DWIDTH_MASK		(0x7 << 21)
 #define PL080_CONTROL_DWIDTH_SHIFT		(21)
 #define PL080_CONTROL_SWIDTH_MASK		(0x7 << 18)
@@ -103,20 +95,20 @@
 #define PL080_WIDTH_16BIT			(0x1)
 #define PL080_WIDTH_32BIT			(0x2)
 
-#define PL080N_CONFIG_ITPROT			(1 << 20)
-#define PL080N_CONFIG_SECPROT			(1 << 19)
-#define PL080_CONFIG_HALT			(1 << 18)
-#define PL080_CONFIG_ACTIVE			(1 << 17)  /* RO */
-#define PL080_CONFIG_LOCK			(1 << 16)
-#define PL080_CONFIG_TC_IRQ_MASK		(1 << 15)
-#define PL080_CONFIG_ERR_IRQ_MASK		(1 << 14)
+#define PL080N_CONFIG_ITPROT			BIT(20)
+#define PL080N_CONFIG_SECPROT			BIT(19)
+#define PL080_CONFIG_HALT			BIT(18)
+#define PL080_CONFIG_ACTIVE			BIT(17)  /* RO */
+#define PL080_CONFIG_LOCK			BIT(16)
+#define PL080_CONFIG_TC_IRQ_MASK		BIT(15)
+#define PL080_CONFIG_ERR_IRQ_MASK		BIT(14)
 #define PL080_CONFIG_FLOW_CONTROL_MASK		(0x7 << 11)
 #define PL080_CONFIG_FLOW_CONTROL_SHIFT		(11)
 #define PL080_CONFIG_DST_SEL_MASK		(0xf << 6)
 #define PL080_CONFIG_DST_SEL_SHIFT		(6)
 #define PL080_CONFIG_SRC_SEL_MASK		(0xf << 1)
 #define PL080_CONFIG_SRC_SEL_SHIFT		(1)
-#define PL080_CONFIG_ENABLE			(1 << 0)
+#define PL080_CONFIG_ENABLE			BIT(0)
 
 #define PL080_FLOW_MEM2MEM			(0x0)
 #define PL080_FLOW_MEM2PER			(0x1)