usb: dwc3: convert structures into bitshifts

our parameter structures need to be written to
HW, so instead of assuming little endian, we
convert those into bit shifts.
Signed-off-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/dwc3/ep0.c

@@ -103,10 +103,8 @@ static int dwc3_ep0_start_trans(struct dwc3 *dwc, u8 epnum, dma_addr_t buf_dma,
 	dwc3_trb_to_hw(&trb, trb_hw);
 
 	memset(&params, 0, sizeof(params));
-	params.param0.depstrtxfer.transfer_desc_addr_high =
-		upper_32_bits(dwc->ep0_trb_addr);
-	params.param1.depstrtxfer.transfer_desc_addr_low =
-		lower_32_bits(dwc->ep0_trb_addr);
+	params.param0 = upper_32_bits(dwc->ep0_trb_addr);
+	params.param1 = lower_32_bits(dwc->ep0_trb_addr);
 
 	ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_STARTTRANSFER, &params);

drivers/usb/dwc3/gadget.c

@@ -158,12 +158,12 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
 
 	dev_vdbg(dwc->dev, "%s: cmd '%s' params %08x %08x %08x\n",
 			dep->name,
-			dwc3_gadget_ep_cmd_string(cmd), params->param0.raw,
-			params->param1.raw, params->param2.raw);
+			dwc3_gadget_ep_cmd_string(cmd), params->param0,
+			params->param1, params->param2);
 
-	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0.raw);
-	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1.raw);
-	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2.raw);
+	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR0(ep), params->param0);
+	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR1(ep), params->param1);
+	dwc3_writel(dwc->regs, DWC3_DEPCMDPAR2(ep), params->param2);
 
 	dwc3_writel(dwc->regs, DWC3_DEPCMD(ep), cmd | DWC3_DEPCMD_CMDACT);
 	do {
@@ -257,21 +257,21 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 
 	memset(&params, 0x00, sizeof(params));
 
-	params.param0.depcfg.ep_type = usb_endpoint_type(desc);
-	params.param0.depcfg.max_packet_size = usb_endpoint_maxp(desc);
-	params.param0.depcfg.burst_size = dep->endpoint.maxburst;
+	params.param0 = DWC3_DEPCFG_EP_TYPE(usb_endpoint_type(desc))
+		| DWC3_DEPCFG_MAX_PACKET_SIZE(usb_endpoint_maxp(desc))
+		| DWC3_DEPCFG_BURST_SIZE(dep->endpoint.maxburst);
 
-	params.param1.depcfg.xfer_complete_enable = true;
-	params.param1.depcfg.xfer_not_ready_enable = true;
+	params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN
+		| DWC3_DEPCFG_XFER_NOT_READY_EN;
 
 	if (usb_endpoint_xfer_bulk(desc) && dep->endpoint.max_streams) {
-		params.param1.depcfg.stream_capable = true;
-		params.param1.depcfg.stream_event_enable = true;
+		params.param1 |= DWC3_DEPCFG_STREAM_CAPABLE
+			| DWC3_DEPCFG_STREAM_EVENT_EN;
 		dep->stream_capable = true;
 	}
 
 	if (usb_endpoint_xfer_isoc(desc))
-		params.param1.depcfg.xfer_in_progress_enable = true;
+		params.param1 |= DWC3_DEPCFG_XFER_IN_PROGRESS_EN;
 
 	/*
 	 * We are doing 1:1 mapping for endpoints, meaning
@@ -279,17 +279,17 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep,
 	 * so on. We consider the direction bit as part of the physical
 	 * endpoint number. So USB endpoint 0x81 is 0x03.
 	 */
-	params.param1.depcfg.ep_number = dep->number;
+	params.param1 |= DWC3_DEPCFG_EP_NUMBER(dep->number);
 
 	/*
 	 * We must use the lower 16 TX FIFOs even though
 	 * HW might have more
 	 */
 	if (dep->direction)
-		params.param0.depcfg.fifo_number = dep->number >> 1;
+		params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
 
 	if (desc->bInterval) {
-		params.param1.depcfg.binterval_m1 = desc->bInterval - 1;
+		params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1);
 		dep->interval = 1 << (desc->bInterval - 1);
 	}
 
@@ -303,7 +303,7 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep)
 
 	memset(&params, 0x00, sizeof(params));
 
-	params.param0.depxfercfg.number_xfer_resources = 1;
+	params.param0 = DWC3_DEPXFERCFG_NUM_XFER_RES(1);
 
 	return dwc3_send_gadget_ep_cmd(dwc, dep->number,
 			DWC3_DEPCMD_SETTRANSFRESOURCE, &params);
@@ -719,10 +719,8 @@ static int __dwc3_gadget_kick_transfer(struct dwc3_ep *dep, u16 cmd_param,
 	}
 
 	memset(&params, 0, sizeof(params));
-	params.param0.depstrtxfer.transfer_desc_addr_high =
-		upper_32_bits(req->trb_dma);
-	params.param1.depstrtxfer.transfer_desc_addr_low =
-		lower_32_bits(req->trb_dma);
+	params.param0 = upper_32_bits(req->trb_dma);
+	params.param1 = lower_32_bits(req->trb_dma);
 
 	if (start_new)
 		cmd = DWC3_DEPCMD_STARTTRANSFER;

drivers/usb/dwc3/gadget.h

@@ -47,120 +47,35 @@ struct dwc3;
 #define to_dwc3_ep(ep)		(container_of(ep, struct dwc3_ep, endpoint))
 #define gadget_to_dwc(g)	(container_of(g, struct dwc3, gadget))
 
-/**
- * struct dwc3_gadget_ep_depcfg_param1 - DEPCMDPAR0 for DEPCFG command
- * @interrupt_number: self-explanatory
- * @reserved7_5: set to zero
- * @xfer_complete_enable: event generated when transfer completed
- * @xfer_in_progress_enable: event generated when transfer in progress
- * @xfer_not_ready_enable: event generated when transfer not read
- * @fifo_error_enable: generates events when FIFO Underrun (IN eps)
- *	or FIFO Overrun (OUT) eps
- * @reserved_12: set to zero
- * @stream_event_enable: event generated on stream
- * @reserved14_15: set to zero
- * @binterval_m1: bInterval minus 1
- * @stream_capable: this EP is capable of handling streams
- * @ep_number: self-explanatory
- * @bulk_based: Set to ‘1’ if this isochronous endpoint represents a bulk
- *	data stream that ignores the relationship of bus time to the
- *	intervals programmed in TRBs.
- * @fifo_based: Set to ‘1’ if this isochronous endpoint represents a
- *	FIFO-based data stream where TRBs have fixed values and are never
- *	written back by the core.
- */
-struct dwc3_gadget_ep_depcfg_param1 {
-	u32	interrupt_number:5;
-	u32	reserved7_5:3;		/* set to zero */
-	u32	xfer_complete_enable:1;
-	u32	xfer_in_progress_enable:1;
-	u32	xfer_not_ready_enable:1;
-	u32	fifo_error_enable:1;	/* IN-underrun, OUT-overrun */
-	u32	reserved12:1;		/* set to zero */
-	u32	stream_event_enable:1;
-	u32	reserved14_15:2;
-	u32	binterval_m1:8;		/* bInterval minus 1 */
-	u32	stream_capable:1;
-	u32	ep_number:5;
-	u32	bulk_based:1;
-	u32	fifo_based:1;
-} __packed;
-
-/**
- * struct dwc3_gadget_ep_depcfg_param0 - Parameter 0 for DEPCFG
- * @reserved0: set to zero
- * @ep_type: Endpoint Type (control, bulk, iso, interrupt)
- * @max_packet_size: max packet size in bytes
- * @reserved16_14: set to zero
- * @fifo_number: self-explanatory
- * @burst_size: burst size minus 1
- * @data_sequence_number: Must be 0 when an endpoint is initially configured
- *	May be non-zero when an endpoint is configured after a power transition
- *	that requires a save/restore.
- * @ignore_sequence_number: Set to ‘1’ to avoid resetting the sequence
- *	number. This setting is used by software to modify the DEPEVTEN
- *	event enable bits without modifying other endpoint settings.
- */
-struct dwc3_gadget_ep_depcfg_param0 {
-	u32	reserved0:1;
-	u32	ep_type:2;
-	u32	max_packet_size:11;
-	u32	reserved16_14:3;
-	u32	fifo_number:5;
-	u32	burst_size:4;
-	u32	data_sequence_number:5;
-	u32	ignore_sequence_number:1;
-} __packed;
-
-/**
- * struct dwc3_gadget_ep_depxfercfg_param0 - Parameter 0 of DEPXFERCFG
- * @number_xfer_resources: Defines the number of Transfer Resources allocated
- *	to this endpoint.  This field must be set to 1.
- * @reserved16_31: set to zero;
- */
-struct dwc3_gadget_ep_depxfercfg_param0 {
-	u32		number_xfer_resources:16;
-	u32		reserved16_31:16;
-} __packed;
-
-/**
- * struct dwc3_gadget_ep_depstrtxfer_param1 - Parameter 1 of DEPSTRTXFER
- * @transfer_desc_addr_low: Indicates the lower 32 bits of the external
- *	memory's start address for the transfer descriptor. Because TRBs
- *	must be aligned to a 16-byte boundary, the lower 4 bits of this
- *	address must be 0.
- */
-struct dwc3_gadget_ep_depstrtxfer_param1 {
-	u32		transfer_desc_addr_low;
-} __packed;
-
-/**
- * struct dwc3_gadget_ep_depstrtxfer_param1 - Parameter 1 of DEPSTRTXFER
- * @transfer_desc_addr_high: Indicates the higher 32 bits of the external
- *	memory’s start address for the transfer descriptor.
- */
-struct dwc3_gadget_ep_depstrtxfer_param0 {
-	u32		transfer_desc_addr_high;
-} __packed;
+/* DEPCFG parameter 1 */
+#define DWC3_DEPCFG_INT_NUM(n)		((n) << 0)
+#define DWC3_DEPCFG_XFER_COMPLETE_EN	(1 << 8)
+#define DWC3_DEPCFG_XFER_IN_PROGRESS_EN	(1 << 9)
+#define DWC3_DEPCFG_XFER_NOT_READY_EN	(1 << 10)
+#define DWC3_DEPCFG_FIFO_ERROR_EN	(1 << 11)
+#define DWC3_DEPCFG_STREAM_EVENT_EN	(1 << 13)
+#define DWC3_DEPCFG_BINTERVAL_M1(n)	((n) << 16)
+#define DWC3_DEPCFG_STREAM_CAPABLE	(1 << 24)
+#define DWC3_DEPCFG_EP_NUMBER(n)	((n) << 25)
+#define DWC3_DEPCFG_BULK_BASED		(1 << 30)
+#define DWC3_DEPCFG_FIFO_BASED		(1 << 31)
+
+/* DEPCFG parameter 0 */
+#define DWC3_DEPCFG_EP_TYPE(n)		((n) << 1)
+#define DWC3_DEPCFG_MAX_PACKET_SIZE(n)	((n) << 3)
+#define DWC3_DEPCFG_FIFO_NUMBER(n)	((n) << 17)
+#define DWC3_DEPCFG_BURST_SIZE(n)	((n) << 22)
+#define DWC3_DEPCFG_DATA_SEQ_NUM(n)	((n) << 26)
+#define DWC3_DEPCFG_IGN_SEQ_NUM		(1 << 31)
+
+/* DEPXFERCFG parameter 0 */
+#define DWC3_DEPXFERCFG_NUM_XFER_RES(n)	((n) & 0xffff)
 
 struct dwc3_gadget_ep_cmd_params {
-	union {
-		u32	raw;
-	} param2;
-
-	union {
-		u32	raw;
-		struct dwc3_gadget_ep_depcfg_param1 depcfg;
-		struct dwc3_gadget_ep_depstrtxfer_param1 depstrtxfer;
-	} param1;
-
-	union {
-		u32	raw;
-		struct dwc3_gadget_ep_depcfg_param0 depcfg;
-		struct dwc3_gadget_ep_depxfercfg_param0 depxfercfg;
-		struct dwc3_gadget_ep_depstrtxfer_param0 depstrtxfer;
-	} param0;
-} __packed;
+	u32	param2;
+	u32	param1;
+	u32	param0;
+};
 
 /* -------------------------------------------------------------------------- */