Merge git://git.iksaif.net/acpi4asus into x86-platform

Documentation/ABI/testing/sysfs-platform-asus-laptop

-What:		/sys/devices/platform/asus-laptop/display
+What:		/sys/devices/platform/asus_laptop/display
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -13,7 +13,7 @@ Description:
 		Ex: - 0 (0000b) means no display
 		    - 3 (0011b) CRT+LCD.
 
-What:		/sys/devices/platform/asus-laptop/gps
+What:		/sys/devices/platform/asus_laptop/gps
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -21,7 +21,7 @@ Description:
 		Control the gps device. 1 means on, 0 means off.
 Users:		Lapsus
 
-What:		/sys/devices/platform/asus-laptop/ledd
+What:		/sys/devices/platform/asus_laptop/ledd
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -29,11 +29,11 @@ Description:
 		Some models like the W1N have a LED display that can be
 		used to display several informations.
 		To control the LED display, use the following :
-		    echo 0x0T000DDD > /sys/devices/platform/asus-laptop/
+		    echo 0x0T000DDD > /sys/devices/platform/asus_laptop/
 		where T control the 3 letters display, and DDD the 3 digits display.
 		The DDD table can be found in Documentation/laptops/asus-laptop.txt
 
-What:		/sys/devices/platform/asus-laptop/bluetooth
+What:		/sys/devices/platform/asus_laptop/bluetooth
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -42,7 +42,7 @@ Description:
 		This may control the led, the device or both.
 Users:		Lapsus
 
-What:		/sys/devices/platform/asus-laptop/wlan
+What:		/sys/devices/platform/asus_laptop/wlan
 Date:		January 2007
 KernelVersion:	2.6.20
 Contact:	"Corentin Chary" <corentincj@iksaif.net>

Documentation/ABI/testing/sysfs-platform-eeepc-laptop

-What:		/sys/devices/platform/eeepc-laptop/disp
+What:		/sys/devices/platform/eeepc/disp
 Date:		May 2008
 KernelVersion:	2.6.26
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -9,21 +9,21 @@ Description:
 		- 3 = LCD+CRT
 		If you run X11, you should use xrandr instead.
 
-What:		/sys/devices/platform/eeepc-laptop/camera
+What:		/sys/devices/platform/eeepc/camera
 Date:		May 2008
 KernelVersion:	2.6.26
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Control the camera. 1 means on, 0 means off.
 
-What:		/sys/devices/platform/eeepc-laptop/cardr
+What:		/sys/devices/platform/eeepc/cardr
 Date:		May 2008
 KernelVersion:	2.6.26
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
 Description:
 		Control the card reader. 1 means on, 0 means off.
 
-What:		/sys/devices/platform/eeepc-laptop/cpufv
+What:		/sys/devices/platform/eeepc/cpufv
 Date:		Jun 2009
 KernelVersion:	2.6.31
 Contact:	"Corentin Chary" <corentincj@iksaif.net>
@@ -42,7 +42,7 @@ Description:
 		    `------------ Availables modes
 		For example, 0x301 means: mode 1 selected, 3 available modes.
 
-What:		/sys/devices/platform/eeepc-laptop/available_cpufv
+What:		/sys/devices/platform/eeepc/available_cpufv
 Date:		Jun 2009
 KernelVersion:	2.6.31
 Contact:	"Corentin Chary" <corentincj@iksaif.net>

drivers/platform/x86/Kconfig

@@ -59,6 +59,8 @@ config ASUS_LAPTOP
 	select NEW_LEDS
 	select BACKLIGHT_CLASS_DEVICE
 	depends on INPUT
+	depends on RFKILL || RFKILL = n
+	select INPUT_SPARSEKMAP
 	---help---
 	  This is the new Linux driver for Asus laptops. It may also support some
 	  MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate

drivers/platform/x86/eeepc-laptop.c

@@ -578,6 +578,8 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
 	struct pci_dev *dev;
 	struct pci_bus *bus;
 	bool blocked = eeepc_wlan_rfkill_blocked(eeepc);
+	bool absent;
+	u32 l;
 
 	if (eeepc->wlan_rfkill)
 		rfkill_set_sw_state(eeepc->wlan_rfkill, blocked);
@@ -591,6 +593,22 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
 			goto out_unlock;
 		}
 
+		if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) {
+			pr_err("Unable to read PCI config space?\n");
+			goto out_unlock;
+		}
+		absent = (l == 0xffffffff);
+
+		if (blocked != absent) {
+			pr_warning("BIOS says wireless lan is %s, "
+					"but the pci device is %s\n",
+				blocked ? "blocked" : "unblocked",
+				absent ? "absent" : "present");
+			pr_warning("skipped wireless hotplug as probably "
+					"inappropriate for this model\n");
+			goto out_unlock;
+		}
+
 		if (!blocked) {
 			dev = pci_get_slot(bus, 0);
 			if (dev) {
@@ -1277,7 +1295,8 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc)
 	 * hotplug code. In fact, current hotplug code seems to unplug another
 	 * device...
 	 */
-	if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0) {
+	if (strcmp(model, "1005HA") == 0 || strcmp(model, "1201N") == 0 ||
+	    strcmp(model, "1005PE") == 0) {
 		eeepc->hotplug_disabled = true;
 		pr_info("wlan hotplug disabled\n");
 	}