[SCSI] remove the obsolete SCSI qlogicisp driver

The SCSI qlogicisp driver is both marked BROKEN and superseded by the
qla1280 driver.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Documentation/scsi/00-INDEX

@@ -52,8 +52,6 @@ ppa.txt
 	- info on driver for IOmega zip drive
 qlogicfas.txt
 	- info on driver for QLogic FASxxx based adapters
-qlogicisp.txt
-	- info on driver for QLogic ISP 1020 based adapters
 scsi-generic.txt
 	- info on the sg driver for generic (non-disk/CD/tape) SCSI devices.
 scsi.txt

Documentation/scsi/qlogicfas.txt

@@ -11,8 +11,7 @@ Qlogic boards:
 	* IQ-PCI-10
 	* IQ-PCI-D
 
-is provided by the qlogicisp.c driver.  Check README.qlogicisp for
-details.
+is provided by the qla1280 driver.
 
 Nor does it support the PCI-Basic, which is supported by the
 'am53c974' driver.

Documentation/scsi/qlogicisp.txt

-Notes for the QLogic ISP1020 PCI SCSI Driver:
-
-This driver works well in practice, but does not support disconnect/
-reconnect, which makes using it with tape drives impractical.
-
-It should work for most host adaptors with the ISP1020 chip.  The
-QLogic Corporation produces several PCI SCSI adapters which should
-work:
-
-	* IQ-PCI
-	* IQ-PCI-10
-	* IQ-PCI-D
-
-This driver may work with boards containing the ISP1020A or ISP1040A
-chips, but that has not been tested.
-
-This driver will NOT work with:
-
-	* ISA or VL Bus Qlogic cards (they use the 'qlogicfas' driver)
-	* PCI-basic (it uses the 'am53c974' driver)
-
-Much thanks to QLogic's tech support for providing the latest ISP1020
-firmware, and for taking the time to review my code.
-
-Erik Moe
-ehm@cris.com
-
-Revised:
-Michael A. Griffith
-grif@cs.ucr.edu

drivers/scsi/Kconfig

@@ -1295,27 +1295,6 @@ config SCSI_QLOGIC_FAS
 	  To compile this driver as a module, choose M here: the
 	  module will be called qlogicfas.
 
-config SCSI_QLOGIC_ISP
-	tristate "Qlogic ISP SCSI support (old driver)"
-	depends on PCI && SCSI && BROKEN
-	---help---
-	  This driver works for all QLogic PCI SCSI host adapters (IQ-PCI,
-	  IQ-PCI-10, IQ_PCI-D) except for the PCI-basic card.  (This latter
-	  card is supported by the "AM53/79C974 PCI SCSI" driver.)
-
-	  If you say Y here, make sure to choose "BIOS" at the question "PCI
-	  access mode".
-
-	  Please read the file <file:Documentation/scsi/qlogicisp.txt>.  You
-	  should also read the SCSI-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called qlogicisp.
-
-	  These days the hardware is also supported by the more modern qla1280
-	  driver.  In doubt use that one instead of qlogicisp.
-
 config SCSI_QLOGIC_FC
 	tristate "Qlogic ISP FC SCSI support"
 	depends on PCI && SCSI
@@ -1342,14 +1321,6 @@ config SCSI_QLOGIC_1280
 	  To compile this driver as a module, choose M here: the
 	  module will be called qla1280.
 
-config SCSI_QLOGIC_1280_1040
-	bool "Qlogic QLA 1020/1040 SCSI support"
-	depends on SCSI_QLOGIC_1280 && SCSI_QLOGIC_ISP!=y
-	help
-	  Say Y here if you have a QLogic ISP1020/1040 SCSI host adapter and
-	  do not want to use the old driver.  This option enables support in
-	  the qla1280 driver for those host adapters.
-
 config SCSI_QLOGICPTI
 	tristate "PTI Qlogic, ISP Driver"
 	depends on SBUS && SCSI

drivers/scsi/Makefile

@@ -78,7 +78,6 @@ obj-$(CONFIG_SCSI_NCR_Q720)	+= NCR_Q720_mod.o
 obj-$(CONFIG_SCSI_SYM53C416)	+= sym53c416.o
 obj-$(CONFIG_SCSI_QLOGIC_FAS)	+= qlogicfas408.o	qlogicfas.o
 obj-$(CONFIG_PCMCIA_QLOGIC)	+= qlogicfas408.o
-obj-$(CONFIG_SCSI_QLOGIC_ISP)	+= qlogicisp.o 
 obj-$(CONFIG_SCSI_QLOGIC_FC)	+= qlogicfc.o 
 obj-$(CONFIG_SCSI_QLOGIC_1280)	+= qla1280.o 
 obj-$(CONFIG_SCSI_QLA2XXX)	+= qla2xxx/

drivers/scsi/qla1280.c

@@ -639,10 +639,8 @@ struct qla_boards {
 static struct pci_device_id qla1280_pci_tbl[] = {
 	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP12160,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
-#ifdef CONFIG_SCSI_QLOGIC_1280_1040
 	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1020,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
-#endif
 	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1080,
 		PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
 	{PCI_VENDOR_ID_QLOGIC, PCI_DEVICE_ID_QLOGIC_ISP1240,