OMAP4: PMIC: Add support for twl6030 codec

In order to have TWL6030 CODEC driver as a platform driver, codec data
should be passed through twl_platform_data structure.

For twl6030 audio codec, the following data may be passed:
    - audpwron_gpio: gpio line used to power-up/down the codec. A low-to-high
      transition powers codec up. Setting audpwron_gpio to a negative value
      means that codec will use manual power sequence instead of automatic
      sequence
    - naudint_irq: irq line for audio interrupt. twl6030 drives NAUDINT line
      to low when an interrupt (codec ready, plug insertion/removal, etc) is
      detected

However, codec driver can operate if any or none of them are passed.
Signed-off-by: NMisael Lopez Cruz <x0052729@ti.com>
Signed-off-by: NMargarita Olaya Cabrera <magi.olaya@ti.com>
Signed-off-by: NJorge Eduardo Candelaria <jorge.candelaria@ti.com>
Acked-by: NSamuel Ortiz <sameo@linux.intel.com>
Acked-by: NLiam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

drivers/mfd/twl-core.c

@@ -115,7 +115,8 @@
 #define twl_has_watchdog()        false
 #endif
 
-#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE)
+#if defined(CONFIG_TWL4030_CODEC) || defined(CONFIG_TWL4030_CODEC_MODULE) ||\
+	defined(CONFIG_SND_SOC_TWL6030) || defined(CONFIG_SND_SOC_TWL6030_MODULE)
 #define twl_has_codec()	true
 #else
 #define twl_has_codec()	false
@@ -711,8 +712,19 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
 			return PTR_ERR(child);
 	}
 
-	if (twl_has_codec() && pdata->codec) {
-		child = add_child(1, "twl4030_codec",
+	if (twl_has_codec() && pdata->codec && twl_class_is_4030()) {
+		sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
+		child = add_child(sub_chip_id, "twl4030_codec",
+				pdata->codec, sizeof(*pdata->codec),
+				false, 0, 0);
+		if (IS_ERR(child))
+			return PTR_ERR(child);
+	}
+
+	/* Phoenix*/
+	if (twl_has_codec() && pdata->codec && twl_class_is_6030()) {
+		sub_chip_id = twl_map[TWL_MODULE_AUDIO_VOICE].sid;
+		child = add_child(sub_chip_id, "twl6030_codec",
 				pdata->codec, sizeof(*pdata->codec),
 				false, 0, 0);
 		if (IS_ERR(child))

include/linux/i2c/twl.h

@@ -547,6 +547,10 @@ struct twl4030_codec_data {
 	unsigned int	audio_mclk;
 	struct twl4030_codec_audio_data		*audio;
 	struct twl4030_codec_vibra_data		*vibra;
+
+	/* twl6030 */
+	int audpwron_gpio;      /* audio power-on gpio */
+	int naudint_irq;        /* audio interrupt */
 };
 
 struct twl4030_platform_data {