Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 3 年多

通知 13
Star 8
Fork 2
K
kernel_linux
提交 d60bec4e 编写于 作者: J Joe Perches 提交者： David S. Miller
浏览文件
操作

tulip_core: Use dev_<level> and pr_<level> 

Convert printks to dev_<level> where appropriate
Convert printks to pr_<level>
Change print formats with %d.dx to %0dx
Coalesce long formats
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 57dbb2d8
隐藏空白更改
内联 并排
Showing with 82 addition and 80 deletion
drivers/net/tulip/tulip_core.c
浏览文件 @ d60bec4e
......@@ -41,7 +41,6 @@
static char version[] __devinitdata =
"Linux Tulip driver version " DRV_VERSION " (" DRV_RELDATE ")\n";
/* A few user-configurable values. */
/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
......@@ -326,7 +325,8 @@ static void tulip_up(struct net_device *dev)
udelay(100);
if (tulip_debug > 1)
printk(KERN_DEBUG "%s: tulip_up(), irq==%d.\n", dev->name, dev->irq);
printk(KERN_DEBUG "%s: tulip_up(), irq==%d\n",
dev->name, dev->irq);
iowrite32(tp->rx_ring_dma, ioaddr + CSR3);
iowrite32(tp->tx_ring_dma, ioaddr + CSR4);
......@@ -387,8 +387,9 @@ static void tulip_up(struct net_device *dev)
(dev->if_port == 12 ? 0 : dev->if_port);
for (i = 0; i < tp->mtable->leafcount; i++)
if (tp->mtable->mleaf[i].media == looking_for) {
printk(KERN_INFO "%s: Using user-specified media %s.\n",
dev->name, medianame[dev->if_port]);
dev_info(&dev->dev,
"Using user-specified media %s\n",
medianame[dev->if_port]);
goto media_picked;
}
}
......@@ -396,8 +397,9 @@ static void tulip_up(struct net_device *dev)
int looking_for = tp->mtable->defaultmedia & MEDIA_MASK;
for (i = 0; i < tp->mtable->leafcount; i++)
if (tp->mtable->mleaf[i].media == looking_for) {
printk(KERN_INFO "%s: Using EEPROM-set media %s.\n",
dev->name, medianame[looking_for]);
dev_info(&dev->dev,
"Using EEPROM-set media %s\n",
medianame[looking_for]);
goto media_picked;
}
}
......@@ -424,9 +426,10 @@ static void tulip_up(struct net_device *dev)
if (tp->mii_cnt) {
tulip_select_media(dev, 1);
if (tulip_debug > 1)
printk(KERN_INFO "%s: Using MII transceiver %d, status "
"%4.4x.\n",
dev->name, tp->phys[0], tulip_mdio_read(dev, tp->phys[0], 1));
dev_info(&dev->dev,
"Using MII transceiver %d, status %04x\n",
tp->phys[0],
tulip_mdio_read(dev, tp->phys[0], 1));
iowrite32(csr6_mask_defstate, ioaddr + CSR6);
tp->csr6 = csr6_mask_hdcap;
dev->if_port = 11;
......@@ -490,9 +493,10 @@ static void tulip_up(struct net_device *dev)
iowrite32(0, ioaddr + CSR2); /* Rx poll demand */
if (tulip_debug > 2) {
printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %8.8x, CSR5 %8.8x CSR6 %8.8x.\n",
dev->name, ioread32(ioaddr + CSR0), ioread32(ioaddr + CSR5),
ioread32(ioaddr + CSR6));
printk(KERN_DEBUG "%s: Done tulip_up(), CSR0 %08x, CSR5 %08x CSR6 %08x\n",
dev->name, ioread32(ioaddr + CSR0),
ioread32(ioaddr + CSR5),
ioread32(ioaddr + CSR6));
}
/* Set the timer to switch to check for link beat and perhaps switch
......@@ -540,27 +544,30 @@ static void tulip_tx_timeout(struct net_device *dev)
if (tulip_media_cap[dev->if_port] & MediaIsMII) {
/* Do nothing -- the media monitor should handle this. */
if (tulip_debug > 1)
printk(KERN_WARNING "%s: Transmit timeout using MII device.\n",
dev->name);
dev_warn(&dev->dev,
"Transmit timeout using MII device\n");
} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142 ||
tp->chip_id == MX98713 || tp->chip_id == COMPEX9881 ||
tp->chip_id == DM910X) {
printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
"SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14), ioread32(ioaddr + CSR15));
dev_warn(&dev->dev,
"21140 transmit timed out, status %08x, SIA %08x %08x %08x %08x, resetting...\n",
ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
ioread32(ioaddr + CSR13), ioread32(ioaddr + CSR14),
ioread32(ioaddr + CSR15));
tp->timeout_recovery = 1;
schedule_work(&tp->media_work);
goto out_unlock;
} else if (tp->chip_id == PNIC2) {
printk(KERN_WARNING "%s: PNIC2 transmit timed out, status %8.8x, "
"CSR6/7 %8.8x / %8.8x CSR12 %8.8x, resetting...\n",
dev->name, (int)ioread32(ioaddr + CSR5), (int)ioread32(ioaddr + CSR6),
(int)ioread32(ioaddr + CSR7), (int)ioread32(ioaddr + CSR12));
dev_warn(&dev->dev,
"PNIC2 transmit timed out, status %08x, CSR6/7 %08x / %08x CSR12 %08x, resetting...\n",
(int)ioread32(ioaddr + CSR5),
(int)ioread32(ioaddr + CSR6),
(int)ioread32(ioaddr + CSR7),
(int)ioread32(ioaddr + CSR12));
} else {
printk(KERN_WARNING "%s: Transmit timed out, status %8.8x, CSR12 "
"%8.8x, resetting...\n",
dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
dev_warn(&dev->dev,
"Transmit timed out, status %08x, CSR12 %08x, resetting...\n",
ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12));
dev->if_port = 0;
}
......@@ -570,26 +577,26 @@ static void tulip_tx_timeout(struct net_device *dev)
for (i = 0; i < RX_RING_SIZE; i++) {
u8 *buf = (u8 *)(tp->rx_ring[i].buffer1);
int j;
printk(KERN_DEBUG "%2d: %8.8x %8.8x %8.8x %8.8x "
"%2.2x %2.2x %2.2x.\n",
i, (unsigned int)tp->rx_ring[i].status,
(unsigned int)tp->rx_ring[i].length,
(unsigned int)tp->rx_ring[i].buffer1,
(unsigned int)tp->rx_ring[i].buffer2,
buf[0], buf[1], buf[2]);
printk(KERN_DEBUG
"%2d: %08x %08x %08x %08x %02x %02x %02x\n",
i,
(unsigned int)tp->rx_ring[i].status,
(unsigned int)tp->rx_ring[i].length,
(unsigned int)tp->rx_ring[i].buffer1,
(unsigned int)tp->rx_ring[i].buffer2,
buf[0], buf[1], buf[2]);
for (j = 0; buf[j] != 0xee && j < 1600; j++)
if (j < 100)
printk(KERN_CONT " %2.2x", buf[j]);
printk(KERN_CONT " j=%d.\n", j);
pr_cont(" %02x", buf[j]);
pr_cont(" j=%d\n", j);
}
printk(KERN_DEBUG " Rx ring %8.8x: ", (int)tp->rx_ring);
printk(KERN_DEBUG " Rx ring %08x: ", (int)tp->rx_ring);
for (i = 0; i < RX_RING_SIZE; i++)
printk(KERN_CONT " %8.8x",
(unsigned int)tp->rx_ring[i].status);
printk(KERN_DEBUG " Tx ring %8.8x: ", (int)tp->tx_ring);
pr_cont(" %08x", (unsigned int)tp->rx_ring[i].status);
printk(KERN_DEBUG " Tx ring %08x: ", (int)tp->tx_ring);
for (i = 0; i < TX_RING_SIZE; i++)
printk(KERN_CONT " %8.8x", (unsigned int)tp->tx_ring[i].status);
printk(KERN_CONT "\n");
pr_cont(" %08x", (unsigned int)tp->tx_ring[i].status);
pr_cont("\n");
}
#endif
......@@ -832,8 +839,9 @@ static int tulip_close (struct net_device *dev)
tulip_down (dev);
if (tulip_debug > 1)
printk (KERN_DEBUG "%s: Shutting down ethercard, status was %2.2x.\n",
dev->name, ioread32 (ioaddr + CSR5));
dev_printk(KERN_DEBUG, &dev->dev,
"Shutting down ethercard, status was %02x\n",
ioread32 (ioaddr + CSR5));
free_irq (dev->irq, dev);
......@@ -1073,10 +1081,10 @@ static void set_rx_mode(struct net_device *dev)
filterbit &= 0x3f;
mc_filter[filterbit >> 5] |= 1 << (filterbit & 31);
if (tulip_debug > 2)
printk(KERN_INFO "%s: Added filter for %pM"
" %8.8x bit %d.\n",
dev->name, mclist->dmi_addr,
ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
dev_info(&dev->dev,
"Added filter for %pM %08x bit %d\n",
mclist->dmi_addr,
ether_crc(ETH_ALEN, mclist->dmi_addr), filterbit);
}
if (mc_filter[0] == tp->mc_filter[0] &&
mc_filter[1] == tp->mc_filter[1])
......@@ -1288,9 +1296,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
unsigned int force_csr0 = 0;
#ifndef MODULE
static int did_version; /* Already printed version info. */
if (tulip_debug > 0 && did_version++ == 0)
printk (KERN_INFO "%s", version);
if (tulip_debug > 0)
printk_once(KERN_INFO "%s", version);
#endif
board_idx++;
......@@ -1301,7 +1308,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
*/
if (pdev->subsystem_vendor == PCI_VENDOR_ID_LMC) {
printk (KERN_ERR PFX "skipping LMC card.\n");
pr_err(PFX "skipping LMC card\n");
return -ENODEV;
}
......@@ -1317,15 +1324,13 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (pdev->vendor == 0x1282 && pdev->device == 0x9100 &&
pdev->revision < 0x30) {
printk(KERN_INFO PFX
"skipping early DM9100 with Crc bug (use dmfe)\n");
pr_info(PFX "skipping early DM9100 with Crc bug (use dmfe)\n");
return -ENODEV;
}
dp = pci_device_to_OF_node(pdev);
if (!(dp && of_get_property(dp, "local-mac-address", NULL))) {
printk(KERN_INFO PFX
"skipping DM910x expansion card (use dmfe)\n");
pr_info(PFX "skipping DM910x expansion card (use dmfe)\n");
return -ENODEV;
}
}
......@@ -1372,9 +1377,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
i = pci_enable_device(pdev);
if (i) {
printk (KERN_ERR PFX
"Cannot enable tulip board #%d, aborting\n",
board_idx);
pr_err(PFX "Cannot enable tulip board #%d, aborting\n",
board_idx);
return i;
}
......@@ -1383,22 +1387,22 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
/* alloc_etherdev ensures aligned and zeroed private structures */
dev = alloc_etherdev (sizeof (*tp));
if (!dev) {
printk (KERN_ERR PFX "ether device alloc failed, aborting\n");
pr_err(PFX "ether device alloc failed, aborting\n");
return -ENOMEM;
}
SET_NETDEV_DEV(dev, &pdev->dev);
if (pci_resource_len (pdev, 0) < tulip_tbl[chip_idx].io_size) {
printk (KERN_ERR PFX "%s: I/O region (0x%llx@0x%llx) too small, "
"aborting\n", pci_name(pdev),
(unsigned long long)pci_resource_len (pdev, 0),
(unsigned long long)pci_resource_start (pdev, 0));
pr_err(PFX "%s: I/O region (0x%llx@0x%llx) too small, aborting\n",
pci_name(pdev),
(unsigned long long)pci_resource_len (pdev, 0),
(unsigned long long)pci_resource_start (pdev, 0));
goto err_out_free_netdev;
}
/* grab all resources from both PIO and MMIO regions, as we
* don't want anyone else messing around with our hardware */
if (pci_request_regions (pdev, "tulip"))
if (pci_request_regions (pdev, DRV_NAME))
goto err_out_free_netdev;
ioaddr = pci_iomap(pdev, TULIP_BAR, tulip_tbl[chip_idx].io_size);
......@@ -1611,8 +1615,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (dev->mem_start & MEDIA_MASK)
tp->default_port = dev->mem_start & MEDIA_MASK;
if (tp->default_port) {
printk(KERN_INFO "tulip%d: Transceiver selection forced to %s.\n",
board_idx, medianame[tp->default_port & MEDIA_MASK]);
pr_info(DRV_NAME "%d: Transceiver selection forced to %s\n",
board_idx, medianame[tp->default_port & MEDIA_MASK]);
tp->medialock = 1;
if (tulip_media_cap[tp->default_port] & MediaAlwaysFD)
tp->full_duplex = 1;
......@@ -1627,7 +1631,7 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
}
if (tp->flags & HAS_MEDIA_TABLE) {
sprintf(dev->name, "tulip%d", board_idx); /* hack */
sprintf(dev->name, DRV_NAME "%d", board_idx); /* hack */
tulip_parse_eeprom(dev);
strcpy(dev->name, "eth%d"); /* un-hack */
}
......@@ -1663,20 +1667,18 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
if (register_netdev(dev))
goto err_out_free_ring;
printk(KERN_INFO "%s: %s rev %d at "
pci_set_drvdata(pdev, dev);
dev_info(&dev->dev,
#ifdef CONFIG_TULIP_MMIO
"MMIO"
"%s rev %d at MMIO %#llx,%s %pM, IRQ %d\n",
#else
"Port"
"%s rev %d at Port %#llx,%s %pM, IRQ %d\n",
#endif
" %#llx,", dev->name, chip_name, pdev->revision,
(unsigned long long) pci_resource_start(pdev, TULIP_BAR));
pci_set_drvdata(pdev, dev);
if (eeprom_missing)
printk(" EEPROM not present,");
printk(" %pM", dev->dev_addr);
printk(", IRQ %d.\n", irq);
chip_name, pdev->revision,
(unsigned long long)pci_resource_start(pdev, TULIP_BAR),
eeprom_missing ? " EEPROM not present," : "",
dev->dev_addr, irq);
if (tp->chip_id == PNIC2)
tp->link_change = pnic2_lnk_change;
......@@ -1799,12 +1801,12 @@ static int tulip_resume(struct pci_dev *pdev)
return 0;
if ((retval = pci_enable_device(pdev))) {
printk (KERN_ERR "tulip: pci_enable_device failed in resume\n");
pr_err(PFX "pci_enable_device failed in resume\n");
return retval;
}
if ((retval = request_irq(dev->irq, tulip_interrupt, IRQF_SHARED, dev->name, dev))) {
printk (KERN_ERR "tulip: request_irq failed in resume\n");
pr_err(PFX "request_irq failed in resume\n");
return retval;
}
......@@ -1874,7 +1876,7 @@ static struct pci_driver tulip_driver = {
static int __init tulip_init (void)
{
#ifdef MODULE
printk (KERN_INFO "%s", version);
pr_info("%s", version);
#endif
/* copy module parms into globals */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或