USB: gadget: pxa2xx_udc supports inverted vbus

Some boards (like e.g. Tosa) invert the VBUS-detection signal:
it's low when a host is supplying VBUS, and high otherwise.
Allow specifying whether gpio_vbus value is inverted.
Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/gadget/pxa2xx_udc.c

@@ -127,8 +127,10 @@ static int is_vbus_present(void)
 {
 	struct pxa2xx_udc_mach_info		*mach = the_controller->mach;
 
-	if (mach->gpio_vbus)
-		return gpio_get_value(mach->gpio_vbus);
+	if (mach->gpio_vbus) {
+		int value = gpio_get_value(mach->gpio_vbus);
+		return mach->gpio_vbus_inverted ? !value : value;
+	}
 	if (mach->udc_is_connected)
 		return mach->udc_is_connected();
 	return 1;
@@ -1398,6 +1400,9 @@ static irqreturn_t udc_vbus_irq(int irq, void *_dev)
 	struct pxa2xx_udc	*dev = _dev;
 	int			vbus = gpio_get_value(dev->mach->gpio_vbus);
 
+	if (dev->mach->gpio_vbus_inverted)
+		vbus = !vbus;
+
 	pxa2xx_udc_vbus_session(&dev->gadget, vbus);
 	return IRQ_HANDLED;
 }

include/asm-arm/mach/udc_pxa2xx.h

@@ -19,7 +19,9 @@ struct pxa2xx_udc_mach_info {
 	 * with on-chip GPIOs not Lubbock's wierd hardware, can have a sane
 	 * VBUS IRQ and omit the methods above.  Store the GPIO number
 	 * here; for GPIO 0, also mask in one of the pxa_gpio_mode() bits.
+	 * Note that sometimes the signals go through inverters...
 	 */
+	bool	gpio_vbus_inverted;
 	u16	gpio_vbus;			/* high == vbus present */
 	u16	gpio_pullup;			/* high == pullup activated */
 };