Merge branch 'linus' into x86/urgent

Merge in Linus's tree to avoid a conflict.
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Documentation/ABI/testing/sysfs-class-mtd

@@ -142,13 +142,14 @@ KernelVersion:	3.4
 Contact:	linux-mtd@lists.infradead.org
 Description:
 		This allows the user to examine and adjust the criteria by which
-		mtd returns -EUCLEAN from mtd_read().  If the maximum number of
-		bit errors that were corrected on any single region comprising
-		an ecc step (as reported by the driver) equals or exceeds this
-		value, -EUCLEAN is returned.  Otherwise, absent an error, 0 is
-		returned.  Higher layers (e.g., UBI) use this return code as an
-		indication that an erase block may be degrading and should be
-		scrutinized as a candidate for being marked as bad.
+		mtd returns -EUCLEAN from mtd_read() and mtd_read_oob().  If the
+		maximum number of bit errors that were corrected on any single
+		region comprising an ecc step (as reported by the driver) equals
+		or exceeds this value, -EUCLEAN is returned.  Otherwise, absent
+		an error, 0 is returned.  Higher layers (e.g., UBI) use this
+		return code as an indication that an erase block may be
+		degrading and should be scrutinized as a candidate for being
+		marked as bad.
 
 		The initial value may be specified by the flash device driver.
 		If not, then the default value is ecc_strength.
@@ -167,7 +168,7 @@ Description:
 		block degradation, but high enough to avoid the consequences of
 		a persistent return value of -EUCLEAN on devices where sticky
 		bitflips occur.  Note that if bitflip_threshold exceeds
-		ecc_strength, -EUCLEAN is never returned by mtd_read().
+		ecc_strength, -EUCLEAN is never returned by the read operations.
 		Conversely, if bitflip_threshold is zero, -EUCLEAN is always
 		returned, absent a hard error.
 

Documentation/DocBook/media/v4l/controls.xml

@@ -3988,7 +3988,7 @@ interface and may change in the future.</para>
 	    from RGB to Y'CbCr color space.
 	    </entry>
 	  </row>
-	  <row id = "v4l2-jpeg-chroma-subsampling">
+	  <row>
 	    <entrytbl spanname="descr" cols="2">
 	      <tbody valign="top">
 		<row>

Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml

@@ -284,13 +284,6 @@ These controls are described in <xref
 	    processing controls. These controls are described in <xref
 	    linkend="image-process-controls" />.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>V4L2_CTRL_CLASS_JPEG</constant></entry>
-	    <entry>0x9d0000</entry>
-	    <entry>The class containing JPEG compression controls.
-These controls are described in <xref
-		linkend="jpeg-controls" />.</entry>
-	  </row>
 	</tbody>
       </tgroup>
     </table>

Documentation/RCU/checklist.txt

@@ -162,9 +162,9 @@ over a rather long period of time, but improvements are always welcome!
 		when publicizing a pointer to a structure that can
 		be traversed by an RCU read-side critical section.
 
-5.	If call_rcu(), or a related primitive such as call_rcu_bh() or
-	call_rcu_sched(), is used, the callback function must be
-	written to be called from softirq context.  In particular,
+5.	If call_rcu(), or a related primitive such as call_rcu_bh(),
+	call_rcu_sched(), or call_srcu() is used, the callback function
+	must be written to be called from softirq context.  In particular,
 	it cannot block.
 
 6.	Since synchronize_rcu() can block, it cannot be called from
@@ -202,11 +202,12 @@ over a rather long period of time, but improvements are always welcome!
 	updater uses call_rcu_sched() or synchronize_sched(), then
 	the corresponding readers must disable preemption, possibly
 	by calling rcu_read_lock_sched() and rcu_read_unlock_sched().
-	If the updater uses synchronize_srcu(), the the corresponding
-	readers must use srcu_read_lock() and srcu_read_unlock(),
-	and with the same srcu_struct.	The rules for the expedited
-	primitives are the same as for their non-expedited counterparts.
-	Mixing things up will result in confusion and broken kernels.
+	If the updater uses synchronize_srcu() or call_srcu(),
+	the the corresponding readers must use srcu_read_lock() and
+	srcu_read_unlock(), and with the same srcu_struct.  The rules for
+	the expedited primitives are the same as for their non-expedited
+	counterparts.  Mixing things up will result in confusion and
+	broken kernels.
 
 	One exception to this rule: rcu_read_lock() and rcu_read_unlock()
 	may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh()
@@ -333,14 +334,14 @@ over a rather long period of time, but improvements are always welcome!
 	victim CPU from ever going offline.)
 
 14.	SRCU (srcu_read_lock(), srcu_read_unlock(), srcu_dereference(),
-	synchronize_srcu(), and synchronize_srcu_expedited()) may only
-	be invoked from process context.  Unlike other forms of RCU, it
-	-is- permissible to block in an SRCU read-side critical section
-	(demarked by srcu_read_lock() and srcu_read_unlock()), hence the
-	"SRCU": "sleepable RCU".  Please note that if you don't need
-	to sleep in read-side critical sections, you should be using
-	RCU rather than SRCU, because RCU is almost always faster and
-	easier to use than is SRCU.
+	synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu())
+	may only be invoked from process context.  Unlike other forms of
+	RCU, it -is- permissible to block in an SRCU read-side critical
+	section (demarked by srcu_read_lock() and srcu_read_unlock()),
+	hence the "SRCU": "sleepable RCU".  Please note that if you
+	don't need to sleep in read-side critical sections, you should be
+	using RCU rather than SRCU, because RCU is almost always faster
+	and easier to use than is SRCU.
 
 	If you need to enter your read-side critical section in a
 	hardirq or exception handler, and then exit that same read-side
@@ -353,8 +354,8 @@ over a rather long period of time, but improvements are always welcome!
 	cleanup_srcu_struct().	These are passed a "struct srcu_struct"
 	that defines the scope of a given SRCU domain.	Once initialized,
 	the srcu_struct is passed to srcu_read_lock(), srcu_read_unlock()
-	synchronize_srcu(), and synchronize_srcu_expedited().  A given
-	synchronize_srcu() waits only for SRCU read-side critical
+	synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu().
+	A given synchronize_srcu() waits only for SRCU read-side critical
 	sections governed by srcu_read_lock() and srcu_read_unlock()
 	calls that have been passed the same srcu_struct.  This property
 	is what makes sleeping read-side critical sections tolerable --
@@ -374,7 +375,7 @@ over a rather long period of time, but improvements are always welcome!
 	requiring SRCU's read-side deadlock immunity or low read-side
 	realtime latency.
 
-	Note that, rcu_assign_pointer() relates to SRCU just as they do
+	Note that, rcu_assign_pointer() relates to SRCU just as it does
 	to other forms of RCU.
 
 15.	The whole point of call_rcu(), synchronize_rcu(), and friends

Documentation/RCU/rcubarrier.txt

@@ -79,8 +79,6 @@ complete. Pseudo-code using rcu_barrier() is as follows:
    2. Execute rcu_barrier().
    3. Allow the module to be unloaded.
 
-Quick Quiz #1: Why is there no srcu_barrier()?
-
 The rcutorture module makes use of rcu_barrier in its exit function
 as follows:
 
@@ -162,7 +160,7 @@ for any pre-existing callbacks to complete.
 Then lines 55-62 print status and do operation-specific cleanup, and
 then return, permitting the module-unload operation to be completed.
 
-Quick Quiz #2: Is there any other situation where rcu_barrier() might
+Quick Quiz #1: Is there any other situation where rcu_barrier() might
 	be required?
 
 Your module might have additional complications. For example, if your
@@ -242,7 +240,7 @@ reaches zero, as follows:
  4 complete(&rcu_barrier_completion);
  5 }
 
-Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes
+Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes
 	immediately (thus incrementing rcu_barrier_cpu_count to the
 	value one), but the other CPU's rcu_barrier_func() invocations
 	are delayed for a full grace period? Couldn't this result in
@@ -259,12 +257,7 @@ so that your module may be safely unloaded.
 
 Answers to Quick Quizzes
 
-Quick Quiz #1: Why is there no srcu_barrier()?
-
-Answer: Since there is no call_srcu(), there can be no outstanding SRCU
-	callbacks. Therefore, there is no need to wait for them.
-
-Quick Quiz #2: Is there any other situation where rcu_barrier() might
+Quick Quiz #1: Is there any other situation where rcu_barrier() might
 	be required?
 
 Answer: Interestingly enough, rcu_barrier() was not originally
@@ -278,7 +271,7 @@ Answer: Interestingly enough, rcu_barrier() was not originally
 	implementing rcutorture, and found that rcu_barrier() solves
 	this problem as well.
 
-Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes
+Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes
 	immediately (thus incrementing rcu_barrier_cpu_count to the
 	value one), but the other CPU's rcu_barrier_func() invocations
 	are delayed for a full grace period? Couldn't this result in

Documentation/RCU/torture.txt

@@ -174,11 +174,20 @@ torture_type	The type of RCU to test, with string values as follows:
 			and synchronize_rcu_bh_expedited().
 
 		"srcu": srcu_read_lock(), srcu_read_unlock() and
+			call_srcu().
+
+		"srcu_sync": srcu_read_lock(), srcu_read_unlock() and
 			synchronize_srcu().
 
 		"srcu_expedited": srcu_read_lock(), srcu_read_unlock() and
 			synchronize_srcu_expedited().
 
+		"srcu_raw": srcu_read_lock_raw(), srcu_read_unlock_raw(),
+			and call_srcu().
+
+		"srcu_raw_sync": srcu_read_lock_raw(), srcu_read_unlock_raw(),
+			and synchronize_srcu().
+
 		"sched": preempt_disable(), preempt_enable(), and
 			call_rcu_sched().
 

Documentation/RCU/whatisRCU.txt

@@ -833,9 +833,9 @@ sched:	Critical sections	Grace period		Barrier
 
 SRCU:	Critical sections	Grace period		Barrier
 
-	srcu_read_lock		synchronize_srcu	N/A
-	srcu_read_unlock	synchronize_srcu_expedited
-	srcu_read_lock_raw
+	srcu_read_lock		synchronize_srcu	srcu_barrier
+	srcu_read_unlock	call_srcu
+	srcu_read_lock_raw	synchronize_srcu_expedited
 	srcu_read_unlock_raw
 	srcu_dereference
 

Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt

@@ -1626,3 +1626,5 @@ MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11		1587
 MX6Q_PAD_SD2_DAT3__GPIO_1_12			1588
 MX6Q_PAD_SD2_DAT3__SJC_DONE			1589
 MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3		1590
+MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID		1591
+MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID		1592

Documentation/kdump/kdump.txt

@@ -86,7 +86,7 @@ There is also a gitweb interface available at
 http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
 
 More information about kexec-tools can be found at
-http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html
+http://horms.net/projects/kexec/
 
 3) Unpack the tarball with the tar command, as follows:
 

Documentation/kernel-parameters.txt

@@ -2367,6 +2367,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
 			Set maximum number of finished RCU callbacks to process
 			in one batch.
 
+	rcutree.fanout_leaf=	[KNL,BOOT]
+			Increase the number of CPUs assigned to each
+			leaf rcu_node structure.  Useful for very large
+			systems.
+
 	rcutree.qhimark=	[KNL,BOOT]
 			Set threshold of queued
 			RCU callbacks over which batch limiting is disabled.

MAINTAINERS

@@ -3433,13 +3433,14 @@ S:	Supported
 F:	drivers/idle/i7300_idle.c
 
 IEEE 802.15.4 SUBSYSTEM
+M:	Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
 M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
-M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://apps.sourceforge.net/trac/linux-zigbee
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
 S:	Maintained
 F:	net/ieee802154/
+F:	net/mac802154/
 F:	drivers/ieee802154/
 
 IIO SUBSYSTEM AND DRIVERS
@@ -4857,6 +4858,7 @@ M:	Kevin Hilman <khilman@ti.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*pm*
+F:	drivers/cpufreq/omap-cpufreq.c
 
 OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT
 M:	Rajendra Nayak <rnayak@ti.com>
@@ -5563,7 +5565,7 @@ F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/ethernet/qlogic/qla3xxx.*
 
 QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER
-M:	Anirban Chakraborty <anirban.chakraborty@qlogic.com>
+M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
 M:	Sony Chacko <sony.chacko@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
@@ -5571,7 +5573,6 @@ S:	Supported
 F:	drivers/net/ethernet/qlogic/qlcnic/
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-M:	Anirban Chakraborty <anirban.chakraborty@qlogic.com>
 M:	Jitendra Kalsaria <jitendra.kalsaria@qlogic.com>
 M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
@@ -5909,7 +5910,7 @@ M:	Ingo Molnar <mingo@redhat.com>
 M:	Peter Zijlstra <peterz@infradead.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core
 S:	Maintained
-F:	kernel/sched*
+F:	kernel/sched/
 F:	include/linux/sched.h
 
 SCORE ARCHITECTURE

Makefile

 VERSION = 3
 PATCHLEVEL = 5
 SUBLEVEL = 0
-EXTRAVERSION = -rc6
+EXTRAVERSION =
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

arch/arm/boot/dts/spear13xx.dtsi

@@ -43,8 +43,8 @@
 
 	pmu {
 		compatible = "arm,cortex-a9-pmu";
-		interrupts = <0 8 0x04
-			      0 9 0x04>;
+		interrupts = <0 6 0x04
+			      0 7 0x04>;
 	};
 
 	L2: l2-cache {
@@ -119,8 +119,8 @@
 		gmac0: eth@e2000000 {
 			compatible = "st,spear600-gmac";
 			reg = <0xe2000000 0x8000>;
-			interrupts = <0 23 0x4
-				      0 24 0x4>;
+			interrupts = <0 33 0x4
+				      0 34 0x4>;
 			interrupt-names = "macirq", "eth_wake_irq";
 			status = "disabled";
 		};
@@ -202,6 +202,7 @@
 			kbd@e0300000 {
 				compatible = "st,spear300-kbd";
 				reg = <0xe0300000 0x1000>;
+				interrupts = <0 52 0x4>;
 				status = "disabled";
 			};
 
@@ -224,7 +225,7 @@
 			serial@e0000000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xe0000000 0x1000>;
-				interrupts = <0 36 0x4>;
+				interrupts = <0 35 0x4>;
 				status = "disabled";
 			};
 

arch/arm/boot/dts/spear320-evb.dts

@@ -15,8 +15,8 @@
 /include/ "spear320.dtsi"
 
 / {
-	model = "ST SPEAr300 Evaluation Board";
-	compatible = "st,spear300-evb", "st,spear300";
+	model = "ST SPEAr320 Evaluation Board";
+	compatible = "st,spear320-evb", "st,spear320";
 	#address-cells = <1>;
 	#size-cells = <1>;
 
@@ -26,7 +26,7 @@
 
 	ahb {
 		pinmux@b3000000 {
-			st,pinmux-mode = <3>;
+			st,pinmux-mode = <4>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&state_default>;
 

arch/arm/boot/dts/spear600.dtsi

@@ -181,6 +181,7 @@
 			timer@f0000000 {
 				compatible = "st,spear-timer";
 				reg = <0xf0000000 0x400>;
+				interrupt-parent = <&vic0>;
 				interrupts = <16>;
 			};
 		};

arch/arm/configs/omap2plus_defconfig

@@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_DEVICEFS=y
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_LIBUSUAL=y

arch/arm/mach-exynos/pm_domains.c

@@ -119,7 +119,9 @@ static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
 						struct exynos_pm_domain *pd)
 {
 	if (pdev->dev.bus) {
-		if (pm_genpd_add_device(&pd->pd, &pdev->dev))
+		if (!pm_genpd_add_device(&pd->pd, &pdev->dev))
+			pm_genpd_dev_need_restore(&pdev->dev, true);
+		else
 			pr_info("%s: error in adding %s device to %s power"
 				"domain\n", __func__, dev_name(&pdev->dev),
 				pd->name);
@@ -151,9 +153,12 @@ static __init int exynos4_pm_init_power_domain(void)
 	if (of_have_populated_dt())
 		return exynos_pm_dt_parse_domains();
 
-	for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++)
-		pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL,
-				exynos4_pm_domains[idx]->is_off);
+	for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) {
+		struct exynos_pm_domain *pd = exynos4_pm_domains[idx];
+		int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
+
+		pm_genpd_init(&pd->pd, NULL, !on);
+	}
 
 #ifdef CONFIG_S5P_DEV_FIMD0
 	exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);

arch/arm/mach-omap2/clockdomain.h

@@ -31,12 +31,16 @@
  *
  * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this
  *     clockdomain.  (Currently, this applies to OMAP3 clockdomains only.)
+ * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is
+ *     active whenever the MPU is active.  True for interconnects and
+ *     the WKUP clockdomains.
  */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
 #define CLKDM_CAN_FORCE_WAKEUP			(1 << 1)
 #define CLKDM_CAN_ENABLE_AUTO			(1 << 2)
 #define CLKDM_CAN_DISABLE_AUTO			(1 << 3)
 #define CLKDM_NO_AUTODEPS			(1 << 4)
+#define CLKDM_ACTIVE_WITH_MPU			(1 << 5)
 
 #define CLKDM_CAN_HWSUP		(CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO)
 #define CLKDM_CAN_SWSUP		(CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP)

arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c

@@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = {
 	.name		= "wkup_clkdm",
 	.pwrdm		= { .name = "wkup_pwrdm" },
 	.dep_bit	= OMAP_EN_WKUP_SHIFT,
+	.flags		= CLKDM_ACTIVE_WITH_MPU,
 };

arch/arm/mach-omap2/clockdomains44xx_data.c

@@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = {
 	.cm_inst	  = OMAP4430_PRM_WKUP_CM_INST,
 	.clkdm_offs	  = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS,
 	.dep_bit	  = OMAP4430_L4WKUP_STATDEP_SHIFT,
-	.flags		  = CLKDM_CAN_HWSUP,
+	.flags		  = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU,
 };
 
 static struct clockdomain emu_sys_44xx_clkdm = {

arch/arm/mach-omap2/omap_hwmod.c

@@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap
  * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
  * @oh: struct omap_hwmod *
  *
- * If module is marked as SWSUP_SIDLE, force the module out of slave
- * idle; otherwise, configure it for smart-idle.  If module is marked
- * as SWSUP_MSUSPEND, force the module out of master standby;
- * otherwise, configure it for smart-standby.  No return value.
+ * Ensure that the OCP_SYSCONFIG register for the IP block represented
+ * by @oh is set to indicate to the PRCM that the IP block is active.
+ * Usually this means placing the module into smart-idle mode and
+ * smart-standby, but if there is a bug in the automatic idle handling
+ * for the IP block, it may need to be placed into the force-idle or
+ * no-idle variants of these modes.  No return value.
  */
 static void _enable_sysc(struct omap_hwmod *oh)
 {
 	u8 idlemode, sf;
 	u32 v;
+	bool clkdm_act;
 
 	if (!oh->class->sysc)
 		return;
@@ -1141,8 +1144,16 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	sf = oh->class->sysc->sysc_flags;
 
 	if (sf & SYSC_HAS_SIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-			HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
+		clkdm_act = ((oh->clkdm &&
+			      oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) ||
+			     (oh->_clk && oh->_clk->clkdm &&
+			      oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU));
+		if (clkdm_act && !(oh->class->sysc->idlemodes &
+				   (SIDLE_SMART | SIDLE_SMART_WKUP)))
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
+			idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
+				HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 
@@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh)
 	sf = oh->class->sysc->sysc_flags;
 
 	if (sf & SYSC_HAS_SIDLEMODE) {
-		idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ?
-			HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART;
+		/* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */
+		if (oh->flags & HWMOD_SWSUP_SIDLE ||
+		    !(oh->class->sysc->idlemodes &
+		      (SIDLE_SMART | SIDLE_SMART_WKUP)))
+			idlemode = HWMOD_IDLEMODE_FORCE;
+		else
+			idlemode = HWMOD_IDLEMODE_SMART;
 		_set_slave_idlemode(oh, idlemode, &v);
 	}
 

arch/arm/mach-s3c24xx/clock-s3c2440.c

@@ -106,7 +106,7 @@ static struct clk s3c2440_clk_cam_upll = {
 static struct clk s3c2440_clk_ac97 = {
 	.name		= "ac97",
 	.enable		= s3c2410_clkcon_enable,
-	.ctrlbit	= S3C2440_CLKCON_CAMERA,
+	.ctrlbit	= S3C2440_CLKCON_AC97,
 };
 
 static unsigned long  s3c2440_fclk_n_getrate(struct clk *clk)

arch/arm/mach-shmobile/platsmp.c

@@ -22,8 +22,13 @@
 #include <mach/common.h>
 #include <mach/emev2.h>
 
+#ifdef CONFIG_ARCH_SH73A0
 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
 			of_machine_is_compatible("renesas,sh73a0"))
+#else
+#define is_sh73a0() (0)
+#endif
+
 #define is_r8a7779() machine_is_marzen()
 
 #ifdef CONFIG_ARCH_EMEV2

arch/arm/mach-spear3xx/spear3xx.c

@@ -87,7 +87,7 @@ void __init spear3xx_map_io(void)
 
 static void __init spear3xx_timer_init(void)
 {
-	char pclk_name[] = "pll3_48m_clk";
+	char pclk_name[] = "pll3_clk";
 	struct clk *gpt_clk, *pclk;
 
 	spear3xx_clk_init();

arch/arm/mach-spear6xx/spear6xx.c

@@ -423,7 +423,7 @@ void __init spear6xx_map_io(void)
 
 static void __init spear6xx_timer_init(void)
 {
-	char pclk_name[] = "pll3_48m_clk";
+	char pclk_name[] = "pll3_clk";
 	struct clk *gpt_clk, *pclk;
 
 	spear6xx_clk_init();

arch/arm/mach-ux500/board-mop500.c

@@ -625,11 +625,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = {
 	&ab8500_device,
 };
 
-static struct platform_device *snowball_of_platform_devs[] __initdata = {
-	&snowball_led_dev,
-	&snowball_key_dev,
-};
-
 static void __init mop500_init_machine(void)
 {
 	struct device *parent = NULL;
@@ -769,6 +764,11 @@ MACHINE_END
 
 #ifdef CONFIG_MACH_UX500_DT
 
+static struct platform_device *snowball_of_platform_devs[] __initdata = {
+	&snowball_led_dev,
+	&snowball_key_dev,
+};
+
 struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	/* Requires DMA and call-back bindings. */
 	OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
@@ -786,6 +786,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
 	OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
+	/* Requires device name bindings. */
+	OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
 	{},
 };
 

arch/arm/mach-ux500/timer.c

@@ -63,8 +63,10 @@ static void __init ux500_timer_init(void)
 
 	/* TODO: Once MTU has been DT:ed place code above into else. */
 	if (of_have_populated_dt()) {
+#ifdef CONFIG_OF
 		np = of_find_matching_node(NULL, prcmu_timer_of_match);
 		if (!np)
+#endif
 			goto dt_fail;
 
 		tmp_base = of_iomap(np, 0);

arch/arm/mm/dma-mapping.c

@@ -1091,7 +1091,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t
 	while (--i)
 		if (pages[i])
 			__free_pages(pages[i], 0);
-	if (array_size < PAGE_SIZE)
+	if (array_size <= PAGE_SIZE)
 		kfree(pages);
 	else
 		vfree(pages);
@@ -1106,7 +1106,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t s
 	for (i = 0; i < count; i++)
 		if (pages[i])
 			__free_pages(pages[i], 0);
-	if (array_size < PAGE_SIZE)
+	if (array_size <= PAGE_SIZE)
 		kfree(pages);
 	else
 		vfree(pages);

arch/arm/plat-samsung/adc.c

@@ -157,11 +157,13 @@ int s3c_adc_start(struct s3c_adc_client *client,
 		return -EINVAL;
 	}
 
-	if (client->is_ts && adc->ts_pend)
-		return -EAGAIN;
-
 	spin_lock_irqsave(&adc->lock, flags);
 
+	if (client->is_ts && adc->ts_pend) {
+		spin_unlock_irqrestore(&adc->lock, flags);
+		return -EAGAIN;
+	}
+
 	client->channel = channel;
 	client->nr_samples = nr_samples;
 

arch/arm/plat-samsung/devs.c

@@ -126,7 +126,8 @@ struct platform_device s3c_device_adc = {
 #ifdef CONFIG_CPU_S3C2440
 static struct resource s3c_camif_resource[] = {
 	[0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF),
-	[1] = DEFINE_RES_IRQ(IRQ_CAM),
+	[1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C),
+	[2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P),
 };
 
 struct platform_device s3c_device_camif = {

arch/arm/plat-samsung/s5p-clock.c

@@ -37,6 +37,7 @@ struct clk clk_ext_xtal_mux = {
 struct clk clk_xusbxti = {
 	.name		= "xusbxti",
 	.id		= -1,
+	.rate		= 24000000,
 };
 
 struct clk s5p_clk_27m = {

arch/h8300/include/asm/pgtable.h

@@ -70,4 +70,7 @@ extern int is_in_rom(unsigned long);
 #define	VMALLOC_END	0xffffffff
 
 #define arch_enter_lazy_cpu_mode()    do {} while (0)
+
+#include <asm-generic/pgtable.h>
+
 #endif /* _H8300_PGTABLE_H */

arch/h8300/include/asm/uaccess.h

@@ -100,7 +100,6 @@ extern int __put_user_bad(void);
 	break;							\
     default:							\
 	__gu_err = __get_user_bad();				\
-	__gu_val = 0;						\
 	break;							\
     }								\
     (x) = __gu_val;						\
@@ -159,4 +158,6 @@ clear_user(void *to, unsigned long n)
 	return 0;
 }
 
+#define __clear_user	clear_user
+
 #endif /* _H8300_UACCESS_H */

arch/h8300/kernel/signal.c

@@ -447,7 +447,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka,
  * want to handle. Thus you cannot kill init even with a SIGKILL even by
  * mistake.
  */
-statis void do_signal(struct pt_regs *regs)
+static void do_signal(struct pt_regs *regs)
 {
 	siginfo_t info;
 	int signr;

arch/h8300/kernel/time.c

@@ -27,6 +27,7 @@
 #include <linux/profile.h>
 
 #include <asm/io.h>
+#include <asm/irq_regs.h>
 #include <asm/timer.h>
 
 #define	TICK_SIZE (tick_nsec / 1000)

arch/hexagon/kernel/smp.c

@@ -180,9 +180,7 @@ void __cpuinit start_secondary(void)
 
 	notify_cpu_starting(cpu);
 
-	ipi_call_lock();
 	set_cpu_online(cpu, true);
-	ipi_call_unlock();
 
 	local_irq_enable();
 

arch/ia64/kernel/smpboot.c

@@ -382,7 +382,6 @@ smp_callin (void)
 	set_numa_node(cpu_to_node_map[cpuid]);
 	set_numa_mem(local_memory_node(cpu_to_node_map[cpuid]));
 
-	ipi_call_lock_irq();
 	spin_lock(&vector_lock);
 	/* Setup the per cpu irq handling data structures */
 	__setup_vector_irq(cpuid);
@@ -390,7 +389,6 @@ smp_callin (void)
 	set_cpu_online(cpuid, true);
 	per_cpu(cpu_state, cpuid) = CPU_ONLINE;
 	spin_unlock(&vector_lock);
-	ipi_call_unlock_irq();
 
 	smp_setup_percpu_timer();
 

arch/m32r/boot/compressed/Makefile

@@ -43,9 +43,9 @@ endif
 
 OBJCOPYFLAGS += -R .empty_zero_page
 
-suffix_$(CONFIG_KERNEL_GZIP)	= gz
-suffix_$(CONFIG_KERNEL_BZIP2)	= bz2
-suffix_$(CONFIG_KERNEL_LZMA)	= lzma
+suffix-$(CONFIG_KERNEL_GZIP)	= gz
+suffix-$(CONFIG_KERNEL_BZIP2)	= bz2
+suffix-$(CONFIG_KERNEL_LZMA)	= lzma
 
 $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
 	$(call if_changed,ld)

arch/m32r/boot/compressed/misc.c

@@ -28,7 +28,7 @@ static unsigned long free_mem_ptr;
 static unsigned long free_mem_end_ptr;
 
 #ifdef CONFIG_KERNEL_BZIP2
-static void *memset(void *s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
 {
 	char *ss = s;
 
@@ -39,6 +39,16 @@ static void *memset(void *s, int c, size_t n)
 #endif
 
 #ifdef CONFIG_KERNEL_GZIP
+void *memcpy(void *dest, const void *src, size_t n)
+{
+	char *d = dest;
+	const char *s = src;
+	while (n--)
+		*d++ = *s++;
+
+	return dest;
+}
+
 #define BOOT_HEAP_SIZE             0x10000
 #include "../../../../lib/decompress_inflate.c"
 #endif

arch/m32r/include/asm/ptrace.h

@@ -113,9 +113,6 @@ struct pt_regs {
 
 #define PTRACE_OLDSETOPTIONS	21
 
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD	0x00000001
-
 #ifdef __KERNEL__
 
 #include <asm/m32r.h>		/* M32R_PSW_BSM, M32R_PSW_BPM */

arch/m32r/include/asm/smp.h

@@ -79,11 +79,6 @@ static __inline__ int cpu_number_map(int cpu)
 	return cpu;
 }
 
-static __inline__ unsigned int num_booting_cpus(void)
-{
-	return cpumask_weight(&cpu_callout_map);
-}
-
 extern void smp_send_timer(void);
 extern unsigned long send_IPI_mask_phys(const cpumask_t*, int, int);
 

arch/m32r/kernel/ptrace.c

@@ -591,17 +591,16 @@ void user_enable_single_step(struct task_struct *child)
 
 	if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0)
 	    != sizeof(insn))
-		return -EIO;
+		return;
 
 	compute_next_pc(insn, pc, &next_pc, child);
 	if (next_pc & 0x80000000)
-		return -EIO;
+		return;
 
 	if (embed_debug_trap(child, next_pc))
-		return -EIO;
+		return;
 
 	invalidate_cache();
-	return 0;
 }
 
 void user_disable_single_step(struct task_struct *child)

arch/m32r/kernel/signal.c

@@ -286,7 +286,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info,
 			case -ERESTARTNOINTR:
 				regs->r0 = regs->orig_r0;
 				if (prev_insn(regs) < 0)
-					return -EFAULT;
+					return;
 		}
 	}
 

arch/mips/Kconfig

@@ -288,6 +288,7 @@ config MIPS_MALTA
 	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_HAS_CPU_MIPS32_R2
 	select SYS_HAS_CPU_MIPS64_R1
+	select SYS_HAS_CPU_MIPS64_R2
 	select SYS_HAS_CPU_NEVADA
 	select SYS_HAS_CPU_RM7000
 	select SYS_HAS_EARLY_PRINTK
@@ -1423,6 +1424,7 @@ config CPU_SB1
 config CPU_CAVIUM_OCTEON
 	bool "Cavium Octeon processor"
 	depends on SYS_HAS_CPU_CAVIUM_OCTEON
+	select ARCH_SPARSEMEM_ENABLE
 	select CPU_HAS_PREFETCH
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select SYS_SUPPORTS_SMP

arch/mips/bcm47xx/Kconfig

@@ -21,6 +21,7 @@ config BCM47XX_BCMA
 	select BCMA
 	select BCMA_HOST_SOC
 	select BCMA_DRIVER_MIPS
+	select BCMA_HOST_PCI if PCI
 	select BCMA_DRIVER_PCI_HOSTMODE if PCI
 	default y
 	help

arch/mips/bcm63xx/dev-pcmcia.c

@@ -79,11 +79,11 @@ static int __init config_pcmcia_cs(unsigned int cs,
 	return ret;
 }
 
-static const __initdata struct {
+static const struct {
 	unsigned int	cs;
 	unsigned int	base;
 	unsigned int	size;
-} pcmcia_cs[3] = {
+} pcmcia_cs[3] __initconst = {
 	{
 		.cs	= MPI_CS_PCMCIA_COMMON,
 		.base	= BCM_PCMCIA_COMMON_BASE_PA,

arch/mips/cavium-octeon/Kconfig

@@ -82,10 +82,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY
 	help
 	  Lock the kernel's implementation of memcpy() into L2.
 
-config ARCH_SPARSEMEM_ENABLE
-	def_bool y
-	select SPARSEMEM_STATIC
-
 config IOMMU_HELPER
 	bool
 

arch/mips/cavium-octeon/smp.c

@@ -185,7 +185,6 @@ static void __cpuinit octeon_init_secondary(void)
 	octeon_init_cvmcount();
 
 	octeon_irq_setup_secondary();
-	raw_local_irq_enable();
 }
 
 /**
@@ -233,6 +232,7 @@ static void octeon_smp_finish(void)
 
 	/* to generate the first CPU timer interrupt */
 	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+	local_irq_enable();
 }
 
 /**

arch/mips/include/asm/bitops.h

@@ -17,7 +17,6 @@
 #include <linux/irqflags.h>
 #include <linux/types.h>
 #include <asm/barrier.h>
-#include <asm/bug.h>
 #include <asm/byteorder.h>		/* sigh ... */
 #include <asm/cpu-features.h>
 #include <asm/sgidefs.h>

arch/mips/include/asm/cmpxchg.h

@@ -8,6 +8,7 @@
 #ifndef __ASM_CMPXCHG_H
 #define __ASM_CMPXCHG_H
 
+#include <linux/bug.h>
 #include <linux/irqflags.h>
 #include <asm/war.h>
 

arch/mips/include/asm/cpu.h

@@ -94,6 +94,7 @@
 #define PRID_IMP_24KE		0x9600
 #define PRID_IMP_74K		0x9700
 #define PRID_IMP_1004K		0x9900
+#define PRID_IMP_M14KC		0x9c00
 
 /*
  * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE
@@ -260,12 +261,12 @@ enum cpu_type_enum {
 	 */
 	CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K,
 	CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350,
-	CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC,
+	CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC,
 
 	/*
 	 * MIPS64 class processors
 	 */
-	CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
+	CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2,
 	CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2,
 	CPU_XLR, CPU_XLP,
 
@@ -288,7 +289,7 @@ enum cpu_type_enum {
 #define MIPS_CPU_ISA_M64R2	0x00000100
 
 #define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \
-	MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 )
+	MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2)
 #define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \
 	MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2)
 

arch/mips/include/asm/gic.h

@@ -206,7 +206,7 @@
 
 #define GIC_VPE_EIC_SHADOW_SET_BASE	0x0100
 #define GIC_VPE_EIC_SS(intr) \
-	(GIC_EIC_SHADOW_SET_BASE + (4 * intr))
+	(GIC_VPE_EIC_SHADOW_SET_BASE + (4 * intr))
 
 #define GIC_VPE_EIC_VEC_BASE		0x0800
 #define GIC_VPE_EIC_VEC(intr) \
@@ -330,6 +330,17 @@ struct gic_intr_map {
 #define GIC_FLAG_TRANSPARENT   0x02
 };
 
+/*
+ * This is only used in EIC mode. This helps to figure out which
+ * shared interrupts we need to process when we get a vector interrupt.
+ */
+#define GIC_MAX_SHARED_INTR  0x5
+struct gic_shared_intr_map {
+	unsigned int num_shared_intr;
+	unsigned int intr_list[GIC_MAX_SHARED_INTR];
+	unsigned int local_intr_mask;
+};
+
 extern void gic_init(unsigned long gic_base_addr,
 	unsigned long gic_addrspace_size, struct gic_intr_map *intrmap,
 	unsigned int intrmap_size, unsigned int irqbase);
@@ -338,5 +349,7 @@ extern unsigned int gic_get_int(void);
 extern void gic_send_ipi(unsigned int intr);
 extern unsigned int plat_ipi_call_int_xlate(unsigned int);
 extern unsigned int plat_ipi_resched_int_xlate(unsigned int);
+extern void gic_bind_eic_interrupt(int irq, int set);
+extern unsigned int gic_get_timer_pending(void);
 
 #endif /* _ASM_GICREGS_H */

arch/mips/include/asm/inst.h

@@ -251,7 +251,7 @@ struct f_format {	/* FPU register format */
 	unsigned int func : 6;
 };
 
-struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+struct ma_format {	/* FPU multiply and add format (MIPS IV) */
 	unsigned int opcode : 6;
 	unsigned int fr : 5;
 	unsigned int ft : 5;
@@ -324,7 +324,7 @@ struct f_format {	/* FPU register format */
 	unsigned int opcode : 6;
 };
 
-struct ma_format {	/* FPU multipy and add format (MIPS IV) */
+struct ma_format {	/* FPU multiply and add format (MIPS IV) */
 	unsigned int fmt : 2;
 	unsigned int func : 4;
 	unsigned int fd : 5;

arch/mips/include/asm/io.h

@@ -17,6 +17,7 @@
 #include <linux/types.h>
 
 #include <asm/addrspace.h>
+#include <asm/bug.h>
 #include <asm/byteorder.h>
 #include <asm/cpu.h>
 #include <asm/cpu-features.h>

arch/mips/include/asm/irq.h

@@ -136,6 +136,7 @@ extern void free_irqno(unsigned int irq);
  * IE7.  Since R2 their number has to be read from the c0_intctl register.
  */
 #define CP0_LEGACY_COMPARE_IRQ 7
+#define CP0_LEGACY_PERFCNT_IRQ 7
 
 extern int cp0_compare_irq;
 extern int cp0_compare_irq_shift;

arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h

@@ -99,7 +99,7 @@
 #define CKCTL_6368_USBH_CLK_EN		(1 << 15)
 #define CKCTL_6368_DISABLE_GLESS_EN	(1 << 16)
 #define CKCTL_6368_NAND_CLK_EN		(1 << 17)
-#define CKCTL_6368_IPSEC_CLK_EN		(1 << 17)
+#define CKCTL_6368_IPSEC_CLK_EN		(1 << 18)
 
 #define CKCTL_6368_ALL_SAFE_EN		(CKCTL_6368_SWPKT_USB_EN |	\
 					CKCTL_6368_SWPKT_SAR_EN |	\

arch/mips/include/asm/mips-boards/maltaint.h

@@ -86,6 +86,16 @@
 #define GIC_CPU_INT4		4 /* .			*/
 #define GIC_CPU_INT5		5 /* Core Interrupt 5   */
 
+/* MALTA GIC local interrupts */
+#define GIC_INT_TMR             (GIC_CPU_INT5)
+#define GIC_INT_PERFCTR         (GIC_CPU_INT5)
+
+/* GIC constants */
+/* Add 2 to convert non-eic hw int # to eic vector # */
+#define GIC_CPU_TO_VEC_OFFSET   (2)
+/* If we map an intr to pin X, GIC will actually generate vector X+1 */
+#define GIC_PIN_TO_VEC_OFFSET   (1)
+
 #define GIC_EXT_INTR(x)		x
 
 /* External Interrupts used for IPI */

arch/mips/include/asm/mipsmtregs.h

@@ -48,7 +48,7 @@
 #define CP0_VPECONF0		$1, 2
 #define CP0_VPECONF1		$1, 3
 #define CP0_YQMASK		$1, 4
-#define CP0_VPESCHEDULE	$1, 5
+#define CP0_VPESCHEDULE		$1, 5
 #define CP0_VPESCHEFBK		$1, 6
 #define CP0_TCSTATUS		$2, 1
 #define CP0_TCBIND		$2, 2

arch/mips/include/asm/switch_to.h

@@ -22,7 +22,7 @@ struct task_struct;
  * switch_to(n) should switch tasks to task nr n, first
  * checking that n isn't the current task, in which case it does nothing.
  */
-extern asmlinkage void *resume(void *last, void *next, void *next_ti);
+extern asmlinkage void *resume(void *last, void *next, void *next_ti, u32 __usedfpu);
 
 extern unsigned int ll_bit;
 extern struct task_struct *ll_task;
@@ -66,11 +66,13 @@ do {									\
 
 #define switch_to(prev, next, last)					\
 do {									\
+	u32 __usedfpu;							\
 	__mips_mt_fpaff_switch_to(prev);				\
 	if (cpu_has_dsp)						\
 		__save_dsp(prev);					\
 	__clear_software_ll_bit();					\
-	(last) = resume(prev, next, task_thread_info(next));		\
+	__usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU);	\
+	(last) = resume(prev, next, task_thread_info(next), __usedfpu);	\
 } while (0)
 
 #define finish_arch_switch(prev)					\

arch/mips/include/asm/thread_info.h

@@ -60,6 +60,8 @@ struct thread_info {
 register struct thread_info *__current_thread_info __asm__("$28");
 #define current_thread_info()  __current_thread_info
 
+#endif /* !__ASSEMBLY__ */
+
 /* thread information allocation */
 #if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT)
 #define THREAD_SIZE_ORDER (1)
@@ -85,8 +87,6 @@ register struct thread_info *__current_thread_info __asm__("$28");
 
 #define STACK_WARN	(THREAD_SIZE / 8)
 
-#endif /* !__ASSEMBLY__ */
-
 #define PREEMPT_ACTIVE		0x10000000
 
 /*

arch/mips/kernel/cpu-probe.c

@@ -4,7 +4,7 @@
  * Copyright (C) xxxx  the Anonymous
  * Copyright (C) 1994 - 2006 Ralf Baechle
  * Copyright (C) 2003, 2004  Maciej W. Rozycki
- * Copyright (C) 2001, 2004  MIPS Inc.
+ * Copyright (C) 2001, 2004, 2011, 2012  MIPS Technologies, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
@@ -199,6 +199,7 @@ void __init check_wait(void)
 		cpu_wait = rm7k_wait_irqoff;
 		break;
 
+	case CPU_M14KC:
 	case CPU_24K:
 	case CPU_34K:
 	case CPU_1004K:
@@ -810,6 +811,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_5KC;
 		__cpu_name[cpu] = "MIPS 5Kc";
 		break;
+	case PRID_IMP_5KE:
+		c->cputype = CPU_5KE;
+		__cpu_name[cpu] = "MIPS 5KE";
+		break;
 	case PRID_IMP_20KC:
 		c->cputype = CPU_20KC;
 		__cpu_name[cpu] = "MIPS 20Kc";
@@ -831,6 +836,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu)
 		c->cputype = CPU_74K;
 		__cpu_name[cpu] = "MIPS 74Kc";
 		break;
+	case PRID_IMP_M14KC:
+		c->cputype = CPU_M14KC;
+		__cpu_name[cpu] = "MIPS M14Kc";
+		break;
 	case PRID_IMP_1004K:
 		c->cputype = CPU_1004K;
 		__cpu_name[cpu] = "MIPS 1004Kc";

arch/mips/kernel/mips_ksyms.c

@@ -5,7 +5,7 @@
  * License.  See the file "COPYING" in the main directory of this archive
  * for more details.
  *
- * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05 by Ralf Baechle
+ * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05, 12 by Ralf Baechle
  * Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc.
  */
 #include <linux/interrupt.h>
@@ -34,6 +34,12 @@ EXPORT_SYMBOL(memmove);
 
 EXPORT_SYMBOL(kernel_thread);
 
+/*
+ * Functions that operate on entire pages.  Mostly used by memory management.
+ */
+EXPORT_SYMBOL(clear_page);
+EXPORT_SYMBOL(copy_page);
+
 /*
  * Userspace access stuff.
  */

arch/mips/kernel/octeon_switch.S

@@ -31,7 +31,7 @@
 
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *                     struct thread_info *next_ti)
+ *                     struct thread_info *next_ti, int usedfpu)
  */
 	.align	7
 	LEAF(resume)

arch/mips/kernel/perf_event_mipsxx.c

@@ -162,11 +162,6 @@ static unsigned int counters_total_to_per_cpu(unsigned int counters)
 	return counters >> vpe_shift();
 }
 
-static unsigned int counters_per_cpu_to_total(unsigned int counters)
-{
-	return counters << vpe_shift();
-}
-
 #else /* !CONFIG_MIPS_MT_SMP */
 #define vpe_id()	0
 

arch/mips/kernel/r2300_switch.S

@@ -43,7 +43,7 @@
 
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *                     struct thread_info *next_ti) )
+ *                     struct thread_info *next_ti, int usedfpu)
  */
 LEAF(resume)
 	mfc0	t1, CP0_STATUS
@@ -51,18 +51,9 @@ LEAF(resume)
 	cpu_save_nonscratch a0
 	sw	ra, THREAD_REG31(a0)
 
-	/*
-	 * check if we need to save FPU registers
-	 */
-	lw	t3, TASK_THREAD_INFO(a0)
-	lw	t0, TI_FLAGS(t3)
-	li	t1, _TIF_USEDFPU
-	and	t2, t0, t1
-	beqz	t2, 1f
-	nor	t1, zero, t1
+	beqz	a3, 1f
 
-	and	t0, t0, t1
-	sw	t0, TI_FLAGS(t3)
+	PTR_L	t3, TASK_THREAD_INFO(a0)
 
 	/*
 	 * clear saved user stack CU1 bit

arch/mips/kernel/r4k_switch.S

@@ -41,7 +41,7 @@
 
 /*
  * task_struct *resume(task_struct *prev, task_struct *next,
- *                     struct thread_info *next_ti)
+ *                     struct thread_info *next_ti, int usedfpu)
  */
 	.align	5
 	LEAF(resume)
@@ -53,16 +53,10 @@
 	/*
 	 * check if we need to save FPU registers
 	 */
-	PTR_L	t3, TASK_THREAD_INFO(a0)
-	LONG_L	t0, TI_FLAGS(t3)
-	li	t1, _TIF_USEDFPU
-	and	t2, t0, t1
-	beqz	t2, 1f
-	nor	t1, zero, t1
 
-	and	t0, t0, t1
-	LONG_S	t0, TI_FLAGS(t3)
+	beqz    a3, 1f
 
+	PTR_L	t3, TASK_THREAD_INFO(a0)
 	/*
 	 * clear saved user stack CU1 bit
 	 */

arch/mips/kernel/smp-bmips.c

@@ -15,7 +15,6 @@
 #include <linux/smp.h>
 #include <linux/interrupt.h>
 #include <linux/spinlock.h>
-#include <linux/init.h>
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <linux/reboot.h>
@@ -197,13 +196,6 @@ static void bmips_init_secondary(void)
 
 	write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0));
 #endif
-
-	/* make sure there won't be a timer interrupt for a little while */
-	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
-
-	irq_enable_hazard();
-	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
-	irq_enable_hazard();
 }
 
 /*
@@ -212,6 +204,13 @@ static void bmips_init_secondary(void)
 static void bmips_smp_finish(void)
 {
 	pr_info("SMP: CPU%d is running\n", smp_processor_id());
+
+	/* make sure there won't be a timer interrupt for a little while */
+	write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ);
+
+	irq_enable_hazard();
+	set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE);
+	irq_enable_hazard();
 }
 
 /*

arch/mips/kernel/smp.c

@@ -122,13 +122,21 @@ asmlinkage __cpuinit void start_secondary(void)
 
 	notify_cpu_starting(cpu);
 
-	mp_ops->smp_finish();
+	set_cpu_online(cpu, true);
+
 	set_cpu_sibling_map(cpu);
 
 	cpu_set(cpu, cpu_callin_map);
 
 	synchronise_count_slave();
 
+	/*
+	 * irq will be enabled in ->smp_finish(), enabling it too early
+	 * is dangerous.
+	 */
+	WARN_ON_ONCE(!irqs_disabled());
+	mp_ops->smp_finish();
+
 	cpu_idle();
 }
 
@@ -196,8 +204,6 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle)
 	while (!cpu_isset(cpu, cpu_callin_map))
 		udelay(100);
 
-	set_cpu_online(cpu, true);
-
 	return 0;
 }
 

arch/mips/kernel/smtc.c

@@ -322,7 +322,7 @@ int __init smtc_build_cpu_map(int start_cpu_slot)
 
 /*
  * Common setup before any secondaries are started
- * Make sure all CPU's are in a sensible state before we boot any of the
+ * Make sure all CPUs are in a sensible state before we boot any of the
  * secondaries.
  *
  * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly
@@ -340,12 +340,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 	/*
 	 * TCContext gets an offset from the base of the IPIQ array
 	 * to be used in low-level code to detect the presence of
-	 * an active IPI queue
+	 * an active IPI queue.
 	 */
 	write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16);
 	/* Bind tc to vpe */
 	write_tc_c0_tcbind(vpe);
-	/* In general, all TCs should have the same cpu_data indications */
+	/* In general, all TCs should have the same cpu_data indications. */
 	memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips));
 	/* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */
 	if (cpu_data[0].cputype == CPU_34K ||
@@ -358,8 +358,8 @@ static void smtc_tc_setup(int vpe, int tc, int cpu)
 }
 
 /*
- * Tweak to get Count registes in as close a sync as possible.
- * Value seems good for 34K-class cores.
+ * Tweak to get Count registes in as close a sync as possible.  The
+ * value seems good for 34K-class cores.
  */
 
 #define CP0_SKEW 8
@@ -615,7 +615,6 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle)
 
 void smtc_init_secondary(void)
 {
-	local_irq_enable();
 }
 
 void smtc_smp_finish(void)
@@ -631,6 +630,8 @@ void smtc_smp_finish(void)
 	if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id))
 		write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
 
+	local_irq_enable();
+
 	printk("TC %d going on-line as CPU %d\n",
 		cpu_data[smp_processor_id()].tc_id, smp_processor_id());
 }

arch/mips/kernel/sync-r4k.c

@@ -111,7 +111,6 @@ void __cpuinit synchronise_count_master(void)
 void __cpuinit synchronise_count_slave(void)
 {
 	int i;
-	unsigned long flags;
 	unsigned int initcount;
 	int ncpus;
 
@@ -123,8 +122,6 @@ void __cpuinit synchronise_count_slave(void)
 	return;
 #endif
 
-	local_irq_save(flags);
-
 	/*
 	 * Not every cpu is online at the time this gets called,
 	 * so we first wait for the master to say everyone is ready
@@ -154,7 +151,5 @@ void __cpuinit synchronise_count_slave(void)
 	}
 	/* Arrange for an interrupt in a short while */
 	write_c0_compare(read_c0_count() + COUNTON);
-
-	local_irq_restore(flags);
 }
 #undef NR_LOOPS

arch/mips/kernel/traps.c

@@ -132,6 +132,9 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs)
 	unsigned long ra = regs->regs[31];
 	unsigned long pc = regs->cp0_epc;
 
+	if (!task)
+		task = current;
+
 	if (raw_show_trace || !__kernel_text_address(pc)) {
 		show_raw_backtrace(sp);
 		return;
@@ -1249,6 +1252,7 @@ static inline void parity_protection_init(void)
 		break;
 
 	case CPU_5KC:
+	case CPU_5KE:
 		write_c0_ecc(0x80000000);
 		back_to_back_c0_hazard();
 		/* Set the PE bit (bit 31) in the c0_errctl register. */
@@ -1498,6 +1502,7 @@ extern void flush_tlb_handlers(void);
  * Timer interrupt
  */
 int cp0_compare_irq;
+EXPORT_SYMBOL_GPL(cp0_compare_irq);
 int cp0_compare_irq_shift;
 
 /*
@@ -1597,7 +1602,7 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu)
 			cp0_perfcount_irq = -1;
 	} else {
 		cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
-		cp0_compare_irq_shift = cp0_compare_irq;
+		cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ;
 		cp0_perfcount_irq = -1;
 	}
 

arch/mips/kernel/vmlinux.lds.S

 #include <asm/asm-offsets.h>
 #include <asm/page.h>
+#include <asm/thread_info.h>
 #include <asm-generic/vmlinux.lds.h>
 
 #undef mips
@@ -72,7 +73,7 @@ SECTIONS
 	.data : {	/* Data */
 		. = . + DATAOFFSET;		/* for CONFIG_MAPPED_KERNEL */
 
-		INIT_TASK_DATA(PAGE_SIZE)
+		INIT_TASK_DATA(THREAD_SIZE)
 		NOSAVE_DATA
 		CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)
 		READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT)

arch/mips/mm/Makefile

@@ -3,8 +3,8 @@
 #
 
 obj-y				+= cache.o dma-default.o extable.o fault.o \
-				   gup.o init.o mmap.o page.o tlbex.o \
-				   tlbex-fault.o uasm.o
+				   gup.o init.o mmap.o page.o page-funcs.o \
+				   tlbex.o tlbex-fault.o uasm.o
 
 obj-$(CONFIG_32BIT)		+= ioremap.o pgtable-32.o
 obj-$(CONFIG_64BIT)		+= pgtable-64.o

arch/mips/mm/c-r4k.c

@@ -977,7 +977,7 @@ static void __cpuinit probe_pcache(void)
 			c->icache.linesz = 2 << lsize;
 		else
 			c->icache.linesz = lsize;
-		c->icache.sets = 64 << ((config1 >> 22) & 7);
+		c->icache.sets = 32 << (((config1 >> 22) + 1) & 7);
 		c->icache.ways = 1 + ((config1 >> 16) & 7);
 
 		icache_size = c->icache.sets *
@@ -997,7 +997,7 @@ static void __cpuinit probe_pcache(void)
 			c->dcache.linesz = 2 << lsize;
 		else
 			c->dcache.linesz= lsize;
-		c->dcache.sets = 64 << ((config1 >> 13) & 7);
+		c->dcache.sets = 32 << (((config1 >> 13) + 1) & 7);
 		c->dcache.ways = 1 + ((config1 >> 7) & 7);
 
 		dcache_size = c->dcache.sets *
@@ -1051,6 +1051,7 @@ static void __cpuinit probe_pcache(void)
 	case CPU_R14000:
 		break;
 
+	case CPU_M14KC:
 	case CPU_24K:
 	case CPU_34K:
 	case CPU_74K:

arch/mips/mm/page-funcs.S

+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Micro-assembler generated clear_page/copy_page functions.
+ *
+ * Copyright (C) 2012  MIPS Technologies, Inc.
+ * Copyright (C) 2012  Ralf Baechle <ralf@linux-mips.org>
+ */
+#include <asm/asm.h>
+#include <asm/regdef.h>
+
+#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+#define cpu_clear_page_function_name	clear_page_cpu
+#define cpu_copy_page_function_name	copy_page_cpu
+#else
+#define cpu_clear_page_function_name	clear_page
+#define cpu_copy_page_function_name	copy_page
+#endif
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache:		0x058 bytes
+ * R4600 v1.7:				0x05c bytes
+ * R4600 v2.0:				0x060 bytes
+ * With prefetching, 16 word strides	0x120 bytes
+ */
+EXPORT(__clear_page_start)
+LEAF(cpu_clear_page_function_name)
+1:	j	1b		/* Dummy, will be replaced. */
+	.space 288
+END(cpu_clear_page_function_name)
+EXPORT(__clear_page_end)
+
+/*
+ * Maximum sizes:
+ *
+ * R4000 128 bytes S-cache:		0x11c bytes
+ * R4600 v1.7:				0x080 bytes
+ * R4600 v2.0:				0x07c bytes
+ * With prefetching, 16 word strides	0x540 bytes
+ */
+EXPORT(__copy_page_start)
+LEAF(cpu_copy_page_function_name)
+1:	j	1b		/* Dummy, will be replaced. */
+	.space 1344
+END(cpu_copy_page_function_name)
+EXPORT(__copy_page_end)

arch/mips/mm/page.c

@@ -6,6 +6,7 @@
  * Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 2007  Maciej W. Rozycki
  * Copyright (C) 2008  Thiemo Seufer
+ * Copyright (C) 2012  MIPS Technologies, Inc.
  */
 #include <linux/init.h>
 #include <linux/kernel.h>
@@ -71,45 +72,6 @@ static struct uasm_reloc __cpuinitdata relocs[5];
 #define cpu_is_r4600_v1_x()	((read_c0_prid() & 0xfffffff0) == 0x00002010)
 #define cpu_is_r4600_v2_x()	((read_c0_prid() & 0xfffffff0) == 0x00002020)
 
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache:		0x058 bytes
- * R4600 v1.7:				0x05c bytes
- * R4600 v2.0:				0x060 bytes
- * With prefetching, 16 word strides	0x120 bytes
- */
-
-static u32 clear_page_array[0x120 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void clear_page_cpu(void *page) __attribute__((alias("clear_page_array")));
-#else
-void clear_page(void *page) __attribute__((alias("clear_page_array")));
-#endif
-
-EXPORT_SYMBOL(clear_page);
-
-/*
- * Maximum sizes:
- *
- * R4000 128 bytes S-cache:		0x11c bytes
- * R4600 v1.7:				0x080 bytes
- * R4600 v2.0:				0x07c bytes
- * With prefetching, 16 word strides	0x540 bytes
- */
-static u32 copy_page_array[0x540 / 4];
-
-#ifdef CONFIG_SIBYTE_DMA_PAGEOPS
-void
-copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array")));
-#else
-void copy_page(void *to, void *from) __attribute__((alias("copy_page_array")));
-#endif
-
-EXPORT_SYMBOL(copy_page);
-
-
 static int pref_bias_clear_store __cpuinitdata;
 static int pref_bias_copy_load __cpuinitdata;
 static int pref_bias_copy_store __cpuinitdata;
@@ -282,10 +244,15 @@ static inline void __cpuinit build_clear_pref(u32 **buf, int off)
 		}
 }
 
+extern u32 __clear_page_start;
+extern u32 __clear_page_end;
+extern u32 __copy_page_start;
+extern u32 __copy_page_end;
+
 void __cpuinit build_clear_page(void)
 {
 	int off;
-	u32 *buf = (u32 *)&clear_page_array;
+	u32 *buf = &__clear_page_start;
 	struct uasm_label *l = labels;
 	struct uasm_reloc *r = relocs;
 	int i;
@@ -356,17 +323,17 @@ void __cpuinit build_clear_page(void)
 	uasm_i_jr(&buf, RA);
 	uasm_i_nop(&buf);
 
-	BUG_ON(buf > clear_page_array + ARRAY_SIZE(clear_page_array));
+	BUG_ON(buf > &__clear_page_end);
 
 	uasm_resolve_relocs(relocs, labels);
 
 	pr_debug("Synthesized clear page handler (%u instructions).\n",
-		 (u32)(buf - clear_page_array));
+		 (u32)(buf - &__clear_page_start));
 
 	pr_debug("\t.set push\n");
 	pr_debug("\t.set noreorder\n");
-	for (i = 0; i < (buf - clear_page_array); i++)
-		pr_debug("\t.word 0x%08x\n", clear_page_array[i]);
+	for (i = 0; i < (buf - &__clear_page_start); i++)
+		pr_debug("\t.word 0x%08x\n", (&__clear_page_start)[i]);
 	pr_debug("\t.set pop\n");
 }
 
@@ -427,7 +394,7 @@ static inline void build_copy_store_pref(u32 **buf, int off)
 void __cpuinit build_copy_page(void)
 {
 	int off;
-	u32 *buf = (u32 *)&copy_page_array;
+	u32 *buf = &__copy_page_start;
 	struct uasm_label *l = labels;
 	struct uasm_reloc *r = relocs;
 	int i;
@@ -595,21 +562,23 @@ void __cpuinit build_copy_page(void)
 	uasm_i_jr(&buf, RA);
 	uasm_i_nop(&buf);
 
-	BUG_ON(buf > copy_page_array + ARRAY_SIZE(copy_page_array));
+	BUG_ON(buf > &__copy_page_end);
 
 	uasm_resolve_relocs(relocs, labels);
 
 	pr_debug("Synthesized copy page handler (%u instructions).\n",
-		 (u32)(buf - copy_page_array));
+		 (u32)(buf - &__copy_page_start));
 
 	pr_debug("\t.set push\n");
 	pr_debug("\t.set noreorder\n");
-	for (i = 0; i < (buf - copy_page_array); i++)
-		pr_debug("\t.word 0x%08x\n", copy_page_array[i]);
+	for (i = 0; i < (buf - &__copy_page_start); i++)
+		pr_debug("\t.word 0x%08x\n", (&__copy_page_start)[i]);
 	pr_debug("\t.set pop\n");
 }
 
 #ifdef CONFIG_SIBYTE_DMA_PAGEOPS
+extern void clear_page_cpu(void *page);
+extern void copy_page_cpu(void *to, void *from);
 
 /*
  * Pad descriptors to cacheline, since each is exclusively owned by a

arch/mips/mm/tlbex.c

@@ -9,6 +9,7 @@
  * Copyright (C) 2005, 2007, 2008, 2009  Maciej W. Rozycki
  * Copyright (C) 2006  Ralf Baechle (ralf@linux-mips.org)
  * Copyright (C) 2008, 2009 Cavium Networks, Inc.
+ * Copyright (C) 2011  MIPS Technologies, Inc.
  *
  * ... and the days got worse and worse and now you see
  * I've gone completly out of my mind.
@@ -494,6 +495,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l,
 	case CPU_R14000:
 	case CPU_4KC:
 	case CPU_4KEC:
+	case CPU_M14KC:
 	case CPU_SB1:
 	case CPU_SB1A:
 	case CPU_4KSC:

arch/mips/mti-malta/malta-pci.c

@@ -241,8 +241,9 @@ void __init mips_pcibios_init(void)
 		return;
 	}
 
-	if (controller->io_resource->start < 0x00001000UL)	/* FIXME */
-		controller->io_resource->start = 0x00001000UL;
+	/* Change start address to avoid conflicts with ACPI and SMB devices */
+	if (controller->io_resource->start < 0x00002000UL)
+		controller->io_resource->start = 0x00002000UL;
 
 	iomem_resource.end &= 0xfffffffffULL;			/* 64 GB */
 	ioport_resource.end = controller->io_resource->end;
@@ -253,7 +254,7 @@ void __init mips_pcibios_init(void)
 }
 
 /* Enable PCI 2.1 compatibility in PIIX4 */
-static void __init quirk_dlcsetup(struct pci_dev *dev)
+static void __devinit quirk_dlcsetup(struct pci_dev *dev)
 {
 	u8 odlc, ndlc;
 	(void) pci_read_config_byte(dev, 0x82, &odlc);

arch/mips/mti-malta/malta-setup.c

@@ -111,7 +111,7 @@ static void __init pci_clock_check(void)
 	unsigned int __iomem *jmpr_p =
 		(unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int));
 	int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07;
-	static const int pciclocks[] __initdata = {
+	static const int pciclocks[] __initconst = {
 		33, 20, 25, 30, 12, 16, 37, 10
 	};
 	int pciclock = pciclocks[jmpr];

arch/mips/netlogic/xlp/setup.c

@@ -82,8 +82,10 @@ void __init prom_free_prom_memory(void)
 
 void xlp_mmu_init(void)
 {
+	/* enable extended TLB and Large Fixed TLB */
 	write_c0_config6(read_c0_config6() | 0x24);
-	current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+	/* set page mask of Fixed TLB in config7 */
 	write_c0_config7(PM_DEFAULT_MASK >>
 		(13 + (ffz(PM_DEFAULT_MASK >> 13) / 2)));
 }
@@ -100,6 +102,10 @@ void __init prom_init(void)
 	nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1));
 #ifdef CONFIG_SMP
 	nlm_wakeup_secondary_cpus(0xffffffff);
+
+	/* update TLB size after waking up threads */
+	current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
 	register_smp_ops(&nlm_smp_ops);
 #endif
 }

arch/mips/oprofile/common.c

@@ -78,6 +78,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops)
 
 	switch (current_cpu_type()) {
 	case CPU_5KC:
+	case CPU_M14KC:
 	case CPU_20KC:
 	case CPU_24K:
 	case CPU_25KF:

arch/mips/oprofile/op_model_mipsxx.c

@@ -322,6 +322,10 @@ static int __init mipsxx_init(void)
 
 	op_model_mipsxx_ops.num_counters = counters;
 	switch (current_cpu_type()) {
+	case CPU_M14KC:
+		op_model_mipsxx_ops.cpu_type = "mips/M14Kc";
+		break;
+
 	case CPU_20KC:
 		op_model_mipsxx_ops.cpu_type = "mips/20K";
 		break;

arch/mips/pci/fixup-fuloong2e.c

@@ -48,7 +48,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	return 0;
 }
 
-static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_nec_fixup(struct pci_dev *pdev)
 {
 	unsigned int val;
 
@@ -60,7 +60,7 @@ static void __init loongson2e_nec_fixup(struct pci_dev *pdev)
 	pci_write_config_dword(pdev, 0xe4, 1 << 5);
 }
 
-static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func0_fixup(struct pci_dev *pdev)
 {
 	unsigned char c;
 
@@ -135,7 +135,7 @@ static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev)
 	printk(KERN_INFO"via686b fix: ISA bridge done\n");
 }
 
-static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func1_fixup(struct pci_dev *pdev)
 {
 	printk(KERN_INFO"via686b fix: IDE\n");
 
@@ -168,19 +168,19 @@ static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev)
 	printk(KERN_INFO"via686b fix: IDE done\n");
 }
 
-static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func2_fixup(struct pci_dev *pdev)
 {
 	/* irq routing */
 	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
 }
 
-static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func3_fixup(struct pci_dev *pdev)
 {
 	/* irq routing */
 	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
 }
 
-static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev)
+static void __devinit loongson2e_686b_func5_fixup(struct pci_dev *pdev)
 {
 	unsigned int val;
 	unsigned char c;

arch/mips/pci/fixup-lemote2f.c

@@ -96,21 +96,21 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 }
 
 /* CS5536 SPEC. fixup */
-static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_isa_fixup(struct pci_dev *pdev)
 {
 	/* the uart1 and uart2 interrupt in PIC is enabled as default */
 	pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1);
 	pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1);
 }
 
-static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ide_fixup(struct pci_dev *pdev)
 {
 	/* setting the mutex pin as IDE function */
 	pci_write_config_dword(pdev, PCI_IDE_CFG_REG,
 			       CS5536_IDE_FLASH_SIGNATURE);
 }
 
-static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_acc_fixup(struct pci_dev *pdev)
 {
 	/* enable the AUDIO interrupt in PIC  */
 	pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1);
@@ -118,14 +118,14 @@ static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev)
 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0);
 }
 
-static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ohci_fixup(struct pci_dev *pdev)
 {
 	/* enable the OHCI interrupt in PIC */
 	/* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */
 	pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1);
 }
 
-static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
+static void __devinit loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
 {
 	u32 hi, lo;
 
@@ -137,7 +137,7 @@ static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev)
 	pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000);
 }
 
-static void __init loongson_nec_fixup(struct pci_dev *pdev)
+static void __devinit loongson_nec_fixup(struct pci_dev *pdev)
 {
 	unsigned int val;
 

arch/mips/pci/fixup-malta.c

@@ -49,10 +49,10 @@ int pcibios_plat_dev_init(struct pci_dev *dev)
 	return 0;
 }
 
-static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func0_fixup(struct pci_dev *pdev)
 {
 	unsigned char reg_val;
-	static int piixirqmap[16] __initdata = {  /* PIIX PIRQC[A:D] irq mappings */
+	static int piixirqmap[16] __devinitdata = {  /* PIIX PIRQC[A:D] irq mappings */
 		0,  0, 	0,  3,
 		4,  5,  6,  7,
 		0,  9, 10, 11,
@@ -83,7 +83,7 @@ static void __init malta_piix_func0_fixup(struct pci_dev *pdev)
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0,
 	 malta_piix_func0_fixup);
 
-static void __init malta_piix_func1_fixup(struct pci_dev *pdev)
+static void __devinit malta_piix_func1_fixup(struct pci_dev *pdev)
 {
 	unsigned char reg_val;
 

arch/mips/pci/fixup-mpc30x.c

@@ -22,13 +22,13 @@
 
 #include <asm/vr41xx/mpc30x.h>
 
-static const int internal_func_irqs[] __initdata = {
+static const int internal_func_irqs[] __initconst = {
 	VRC4173_CASCADE_IRQ,
 	VRC4173_AC97_IRQ,
 	VRC4173_USB_IRQ,
 };
 
-static const int irq_tab_mpc30x[] __initdata = {
+static const int irq_tab_mpc30x[] __initconst = {
  [12] = VRC4173_PCMCIA1_IRQ,
  [13] = VRC4173_PCMCIA2_IRQ,
  [29] = MQ200_IRQ,

arch/mips/pci/fixup-sb1250.c

@@ -15,7 +15,7 @@
  * Set the BCM1250, etc. PCI host bridge's TRDY timeout
  * to the finite max.
  */
-static void __init quirk_sb1250_pci(struct pci_dev *dev)
+static void __devinit quirk_sb1250_pci(struct pci_dev *dev)
 {
 	pci_write_config_byte(dev, 0x40, 0xff);
 }
@@ -25,7 +25,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI,
 /*
  * The BCM1250, etc. PCI/HT bridge reports as a host bridge.
  */
-static void __init quirk_sb1250_ht(struct pci_dev *dev)
+static void __devinit quirk_sb1250_ht(struct pci_dev *dev)
 {
 	dev->class = PCI_CLASS_BRIDGE_PCI << 8;
 }
@@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT,
 /*
  * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max.
  */
-static void __init quirk_sp1011(struct pci_dev *dev)
+static void __devinit quirk_sp1011(struct pci_dev *dev)
 {
 	pci_write_config_byte(dev, 0x64, 0xff);
 }

arch/mips/pci/ops-tx4927.c

@@ -495,7 +495,7 @@ irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
 }
 
 #ifdef CONFIG_TOSHIBA_FPCIB0
-static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
 {
 	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
 

arch/mips/pci/pci-ip27.c

@@ -212,7 +212,7 @@ static inline void pci_enable_swapping(struct pci_dev *dev)
 	bridge->b_widget.w_tflush;	/* Flush */
 }
 
-static void __init pci_fixup_ioc3(struct pci_dev *d)
+static void __devinit pci_fixup_ioc3(struct pci_dev *d)
 {
 	pci_disable_swapping(d);
 }

arch/mips/pci/pci-lantiq.c

@@ -129,7 +129,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)
 
 	/* setup reset gpio used by pci */
 	reset_gpio = of_get_named_gpio(node, "gpio-reset", 0);
-	if (reset_gpio > 0)
+	if (gpio_is_valid(reset_gpio))
 		devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset");
 
 	/* enable auto-switching between PCI and EBU */
@@ -192,7 +192,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev)
 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
 
 	/* toggle reset pin */
-	if (reset_gpio > 0) {
+	if (gpio_is_valid(reset_gpio)) {
 		__gpio_set_value(reset_gpio, 0);
 		wmb();
 		mdelay(1);

arch/mips/pci/pci-xlr.c

@@ -41,6 +41,7 @@
 #include <linux/irq.h>
 #include <linux/irqdesc.h>
 #include <linux/console.h>
+#include <linux/pci_regs.h>
 
 #include <asm/io.h>
 
@@ -156,35 +157,55 @@ struct pci_controller nlm_pci_controller = {
 	.io_offset      = 0x00000000UL,
 };
 
+/*
+ * The top level PCIe links on the XLS PCIe controller appear as
+ * bridges. Given a device, this function finds which link it is
+ * on.
+ */
+static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev)
+{
+	struct pci_bus *bus, *p;
+
+	/* Find the bridge on bus 0 */
+	bus = dev->bus;
+	for (p = bus->parent; p && p->number != 0; p = p->parent)
+		bus = p;
+
+	return p ? bus->self : NULL;
+}
+
 static int get_irq_vector(const struct pci_dev *dev)
 {
+	struct pci_dev *lnk;
+
 	if (!nlm_chip_is_xls())
-		return	PIC_PCIX_IRQ;	/* for XLR just one IRQ*/
+		return	PIC_PCIX_IRQ;	/* for XLR just one IRQ */
 
 	/*
 	 * For XLS PCIe, there is an IRQ per Link, find out which
 	 * link the device is on to assign interrupts
-	*/
-	if (dev->bus->self == NULL)
+	 */
+	lnk = xls_get_pcie_link(dev);
+	if (lnk == NULL)
 		return 0;
 
-	switch	(dev->bus->self->devfn) {
-	case 0x0:
+	switch	(PCI_SLOT(lnk->devfn)) {
+	case 0:
 		return PIC_PCIE_LINK0_IRQ;
-	case 0x8:
+	case 1:
 		return PIC_PCIE_LINK1_IRQ;
-	case 0x10:
+	case 2:
 		if (nlm_chip_is_xls_b())
 			return PIC_PCIE_XLSB0_LINK2_IRQ;
 		else
 			return PIC_PCIE_LINK2_IRQ;
-	case 0x18:
+	case 3:
 		if (nlm_chip_is_xls_b())
 			return PIC_PCIE_XLSB0_LINK3_IRQ;
 		else
 			return PIC_PCIE_LINK3_IRQ;
 	}
-	WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn);
+	WARN(1, "Unexpected devfn %d\n", lnk->devfn);
 	return 0;
 }
 
@@ -202,7 +223,27 @@ void arch_teardown_msi_irq(unsigned int irq)
 int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
 {
 	struct msi_msg msg;
+	struct pci_dev *lnk;
 	int irq, ret;
+	u16 val;
+
+	/* MSI not supported on XLR */
+	if (!nlm_chip_is_xls())
+		return 1;
+
+	/*
+	 * Enable MSI on the XLS PCIe controller bridge which was disabled
+	 * at enumeration, the bridge MSI capability is at 0x50
+	 */
+	lnk = xls_get_pcie_link(dev);
+	if (lnk == NULL)
+		return 1;
+
+	pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val);
+	if ((val & PCI_MSI_FLAGS_ENABLE) == 0) {
+		val |= PCI_MSI_FLAGS_ENABLE;
+		pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val);
+	}
 
 	irq = get_irq_vector(dev);
 	if (irq <= 0)
@@ -327,7 +368,7 @@ static int __init pcibios_init(void)
 		}
 	} else {
 		/* XLR PCI controller ACK */
-		irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack);
+		irq_set_handler_data(PIC_PCIX_IRQ, xlr_pci_ack);
 	}
 
 	return 0;

arch/mips/pmc-sierra/yosemite/smp.c

@@ -115,11 +115,11 @@ static void yos_send_ipi_mask(const struct cpumask *mask, unsigned int action)
  */
 static void __cpuinit yos_init_secondary(void)
 {
-	set_c0_status(ST0_CO | ST0_IE | ST0_IM);
 }
 
 static void __cpuinit yos_smp_finish(void)
 {
+	set_c0_status(ST0_CO | ST0_IM | ST0_IE);
 }
 
 /* Hook for after all CPUs are online */

arch/mips/powertv/asic/asic-calliope.c

@@ -28,7 +28,7 @@
 
 #define CALLIOPE_ADDR(x)	(CALLIOPE_IO_BASE + (x))
 
-const struct register_map calliope_register_map __initdata = {
+const struct register_map calliope_register_map __initconst = {
 	.eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)},
 	.eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)},
 	.eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)},

arch/mips/powertv/asic/asic-cronus.c

@@ -28,7 +28,7 @@
 
 #define CRONUS_ADDR(x)	(CRONUS_IO_BASE + (x))
 
-const struct register_map cronus_register_map __initdata = {
+const struct register_map cronus_register_map __initconst = {
 	.eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)},
 	.eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)},
 	.eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)},

arch/mips/powertv/asic/asic-gaia.c

@@ -23,7 +23,7 @@
 #include <linux/init.h>
 #include <asm/mach-powertv/asic.h>
 
-const struct register_map gaia_register_map __initdata = {
+const struct register_map gaia_register_map __initconst = {
 	.eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000},
 	.eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038},
 	.eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C},

arch/mips/powertv/asic/asic-zeus.c

@@ -28,7 +28,7 @@
 
 #define ZEUS_ADDR(x)	(ZEUS_IO_BASE + (x))
 
-const struct register_map zeus_register_map __initdata = {
+const struct register_map zeus_register_map __initconst = {
 	.eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)},
 	.eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)},
 	.eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)},

arch/mips/txx9/generic/pci.c

@@ -269,7 +269,7 @@ txx9_i8259_irq_setup(int irq)
 	return err;
 }
 
-static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev)
 {
 	int irq;	/* PCI/ISA Bridge interrupt */
 	u8 reg_64;

arch/mn10300/include/asm/ptrace.h

@@ -81,9 +81,6 @@ struct pt_regs {
 #define PTRACE_GETFPREGS          14
 #define PTRACE_SETFPREGS          15
 
-/* options set using PTRACE_SETOPTIONS */
-#define PTRACE_O_TRACESYSGOOD     0x00000001
-
 #ifdef __KERNEL__
 
 #define user_mode(regs)			(((regs)->epsw & EPSW_nSL) == EPSW_nSL)

arch/mn10300/include/asm/thread_info.h

@@ -123,7 +123,7 @@ static inline unsigned long current_stack_pointer(void)
 }
 
 #ifndef CONFIG_KGDB
-void arch_release_thread_info(struct thread_info *ti)
+void arch_release_thread_info(struct thread_info *ti);
 #endif
 #define get_thread_info(ti)	get_task_struct((ti)->task)
 #define put_thread_info(ti)	put_task_struct((ti)->task)

arch/mn10300/include/asm/timex.h

@@ -11,7 +11,6 @@
 #ifndef _ASM_TIMEX_H
 #define _ASM_TIMEX_H
 
-#include <asm/hardirq.h>
 #include <unit/timex.h>
 
 #define TICK_SIZE (tick_nsec / 1000)
@@ -30,16 +29,6 @@ static inline cycles_t get_cycles(void)
 extern int init_clockevents(void);
 extern int init_clocksource(void);
 
-static inline void setup_jiffies_interrupt(int irq,
-					   struct irqaction *action)
-{
-	u16 tmp;
-	setup_irq(irq, action);
-	set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL));
-	GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
-	tmp = GxICR(irq);
-}
-
 #endif /* __KERNEL__ */
 
 #endif /* _ASM_TIMEX_H */