Revert "usb: dwc2: Update Kconfig to support dual-role"

This reverts commit e006fee6.

This patch causes build break. Modifications in Makefile and Kconfig have
no connection with driver code.
Signed-off-by: NRobert Baldyga <r.baldyga@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/usb/dwc2/Kconfig

 config USB_DWC2
-	tristate "DesignWare USB2 DRD Core Support"
+	bool "DesignWare USB2 DRD Core Support"
 	depends on USB
 	help
 	  Say Y here if your system has a Dual Role Hi-Speed USB
 	  controller based on the DesignWare HSOTG IP Core.
 
-	  If you choose to build the driver as dynamically
-	  linked modules, a single dwc2.ko(regardless of mode of operation)
-	  will get built for both platform IPs and PCI.
+	  For host mode, if you choose to build the driver as dynamically
+	  linked modules, the core module will be called dwc2.ko, the PCI
+	  bus interface module (if you have a PCI bus system) will be
+	  called dwc2_pci.ko, and the platform interface module (for
+	  controllers directly connected to the CPU) will be called
+	  dwc2_platform.ko. For gadget mode, there will be a single
+	  module called dwc2_gadget.ko.
 
-if USB_DWC2
+	  NOTE: The s3c-hsotg driver is now renamed to dwc2_gadget. The
+	  host and gadget drivers are still currently separate drivers.
+	  There are plans to merge the dwc2_gadget driver with the dwc2
+	  host driver in the near future to create a dual-role driver.
 
-choice
-	bool "DWC2 Mode Selection"
-	default USB_DWC2_DUAL_ROLE if (USB && USB_GADGET)
-	default USB_DWC2_HOST if (USB && !USB_GADGET)
-	default USB_DWC2_PERIPHERAL if (!USB && USB_GADGET)
+if USB_DWC2
 
 config USB_DWC2_HOST
-	bool "Host only mode"
+	tristate "Host only mode"
 	depends on USB
 	help
 	  The Designware USB2.0 high-speed host controller
-	  integrated into many SoCs. Select this option if you want the
-	  driver to operate in Host-only mode.
+	  integrated into many SoCs.
+
+config USB_DWC2_PLATFORM
+	bool "DWC2 Platform"
+	depends on USB_DWC2_HOST
+	default USB_DWC2_HOST
+	help
+	  The Designware USB2.0 platform interface module for
+	  controllers directly connected to the CPU. This is only
+	  used for host mode.
 
 config USB_DWC2_PCI
 	bool "DWC2 PCI"
@@ -36,31 +47,11 @@ config USB_DWC2_PCI
 comment "Gadget mode requires USB Gadget support to be enabled"
 
 config USB_DWC2_PERIPHERAL
-	bool "Gadget only mode"
-	depends on USB_GADGET=y || USB_GADGET=USB_DWC2
+	tristate "Gadget only mode"
+	depends on USB_GADGET
 	help
 	  The Designware USB2.0 high-speed gadget controller
-	  integrated into many SoCs. Select this option if you want the
-	  driver to operate in Peripheral-only mode. This option requires
-	  USB_GADGET=y.
-
-config USB_DWC2_DUAL_ROLE
-	bool "Dual Role mode"
-	depends on ((USB=y || USB=USB_DWC2) && (USB_GADGET=y || USB_GADGET=USB_DWC2))
-	help
-	  Select this option if you want the driver to work in a dual-role
-	  mode. In this mode both host and gadget features are enabled, and
-	  the role will be determined by the cable that gets plugged-in. This
-	  option requires USB_GADGET=y.
-endchoice
-
-config USB_DWC2_PLATFORM
-	bool
-        depends on !PCI
-        default y
-        help
-          The Designware USB2.0 platform interface module for
-          controllers directly connected to the CPU.
+	  integrated into many SoCs.
 
 config USB_DWC2_DEBUG
 	bool "Enable Debugging Messages"

drivers/usb/dwc2/Makefile

 ccflags-$(CONFIG_USB_DWC2_DEBUG)	+= -DDEBUG
 ccflags-$(CONFIG_USB_DWC2_VERBOSE)	+= -DVERBOSE_DEBUG
 
-obj-$(CONFIG_USB_DWC2)			+= dwc2.o
+obj-$(CONFIG_USB_DWC2_HOST)		+= dwc2.o
 dwc2-y					:= core.o core_intr.o
-
-ifneq ($(filter y,$(CONFIG_USB_DWC2_HOST) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
-	dwc2-y				+= hcd.o hcd_intr.o
-	dwc2-y				+= hcd_queue.o hcd_ddma.o
-endif
-
-ifneq ($(filter y,$(CONFIG_USB_DWC2_PERIPHERAL) $(CONFIG_USB_DWC2_DUAL_ROLE)),)
-	dwc2-y       			+= gadget.o
-endif
+dwc2-y					+= hcd.o hcd_intr.o
+dwc2-y					+= hcd_queue.o hcd_ddma.o
 
 # NOTE: The previous s3c-hsotg peripheral mode only driver has been moved to
 # this location and renamed gadget.c. When building for dynamically linked
@@ -26,4 +19,10 @@ ifneq ($(CONFIG_USB_DWC2_PCI),)
 	dwc2_pci-y			:= pci.o
 endif
 
-dwc2-$(CONFIG_USB_DWC2_PLATFORM) += platform.o
+ifneq ($(CONFIG_USB_DWC2_PLATFORM),)
+	obj-$(CONFIG_USB_DWC2_HOST)	+= dwc2_platform.o
+	dwc2_platform-y			:= platform.o
+endif
+
+obj-$(CONFIG_USB_DWC2_PERIPHERAL)	+= dwc2_gadget.o
+dwc2_gadget-y				:= gadget.o