Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (26 commits)
  amd64_edac: add MAINTAINERS entry
  EDAC: do not enable modules by default
  amd64_edac: do not enable module by default
  amd64_edac: add module registration routines
  amd64_edac: add ECC reporting initializers
  amd64_edac: add EDAC core-related initializers
  amd64_edac: add error decoding logic
  amd64_edac: add ECC chipkill syndrome mapping table
  amd64_edac: add per-family descriptors
  amd64_edac: add F10h-and-later methods-p3
  amd64_edac: add F10h-and-later methods-p2
  amd64_edac: add F10h-and-later methods-p1
  amd64_edac: add k8-specific methods
  amd64_edac: assign DRAM chip select base and mask in a family-specific way
  amd64_edac: add helper to dump relevant registers
  amd64_edac: add DRAM address type conversion facilities
  amd64_edac: add functionality to compute the DRAM hole
  amd64_edac: add sys addr to memory controller mapping helpers
  amd64_edac: add memory scrubber interface
  amd64_edac: add MCA error types
  ...

MAINTAINERS

@@ -1979,6 +1979,16 @@ F:	Documentation/edac.txt
 F:	drivers/edac/edac_*
 F:	include/linux/edac.h
 
+EDAC-AMD64
+P:	Doug Thompson
+M:	dougthompson@xmission.com
+P:	Borislav Petkov
+M:	borislav.petkov@amd.com
+L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
+W:	bluesmoke.sourceforge.net
+S:	Supported
+F:	drivers/edac/amd64_edac*
+
 EDAC-E752X
 P:	Mark Gross
 M:	mark.gross@intel.com

arch/x86/include/asm/msr.h

@@ -12,6 +12,17 @@
 
 #include <asm/asm.h>
 #include <asm/errno.h>
+#include <asm/cpumask.h>
+
+struct msr {
+	union {
+		struct {
+			u32 l;
+			u32 h;
+		};
+		u64 q;
+	};
+};
 
 static inline unsigned long long native_read_tscp(unsigned int *aux)
 {
@@ -216,6 +227,8 @@ do {                                                            \
 #ifdef CONFIG_SMP
 int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
+void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
+void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs);
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h);
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h);
 #else  /*  CONFIG_SMP  */
@@ -229,6 +242,16 @@ static inline int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 	wrmsr(msr_no, l, h);
 	return 0;
 }
+static inline void rdmsr_on_cpus(const cpumask_t *m, u32 msr_no,
+				struct msr *msrs)
+{
+       rdmsr_on_cpu(0, msr_no, &(msrs[0].l), &(msrs[0].h));
+}
+static inline void wrmsr_on_cpus(const cpumask_t *m, u32 msr_no,
+				struct msr *msrs)
+{
+       wrmsr_on_cpu(0, msr_no, msrs[0].l, msrs[0].h);
+}
 static inline int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no,
 				    u32 *l, u32 *h)
 {

arch/x86/lib/Makefile

@@ -2,7 +2,7 @@
 # Makefile for x86 specific library files.
 #
 
-obj-$(CONFIG_SMP) := msr-on-cpu.o
+obj-$(CONFIG_SMP) := msr.o
 
 lib-y := delay.o
 lib-y += thunk_$(BITS).o

arch/x86/lib/msr-on-cpu.c → arch/x86/lib/msr.c

@@ -5,22 +5,38 @@
 
 struct msr_info {
 	u32 msr_no;
-	u32 l, h;
+	struct msr reg;
+	struct msr *msrs;
+	int off;
 	int err;
 };
 
 static void __rdmsr_on_cpu(void *info)
 {
 	struct msr_info *rv = info;
+	struct msr *reg;
+	int this_cpu = raw_smp_processor_id();
 
-	rdmsr(rv->msr_no, rv->l, rv->h);
+	if (rv->msrs)
+		reg = &rv->msrs[this_cpu - rv->off];
+	else
+		reg = &rv->reg;
+
+	rdmsr(rv->msr_no, reg->l, reg->h);
 }
 
 static void __wrmsr_on_cpu(void *info)
 {
 	struct msr_info *rv = info;
+	struct msr *reg;
+	int this_cpu = raw_smp_processor_id();
+
+	if (rv->msrs)
+		reg = &rv->msrs[this_cpu - rv->off];
+	else
+		reg = &rv->reg;
 
-	wrmsr(rv->msr_no, rv->l, rv->h);
+	wrmsr(rv->msr_no, reg->l, reg->h);
 }
 
 int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
@@ -28,26 +44,95 @@ int rdmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 	int err;
 	struct msr_info rv;
 
+	memset(&rv, 0, sizeof(rv));
+
 	rv.msr_no = msr_no;
 	err = smp_call_function_single(cpu, __rdmsr_on_cpu, &rv, 1);
-	*l = rv.l;
-	*h = rv.h;
+	*l = rv.reg.l;
+	*h = rv.reg.h;
 
 	return err;
 }
+EXPORT_SYMBOL(rdmsr_on_cpu);
 
 int wrmsr_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	int err;
 	struct msr_info rv;
 
+	memset(&rv, 0, sizeof(rv));
+
 	rv.msr_no = msr_no;
-	rv.l = l;
-	rv.h = h;
+	rv.reg.l = l;
+	rv.reg.h = h;
 	err = smp_call_function_single(cpu, __wrmsr_on_cpu, &rv, 1);
 
 	return err;
 }
+EXPORT_SYMBOL(wrmsr_on_cpu);
+
+/* rdmsr on a bunch of CPUs
+ *
+ * @mask:       which CPUs
+ * @msr_no:     which MSR
+ * @msrs:       array of MSR values
+ *
+ */
+void rdmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
+{
+	struct msr_info rv;
+	int this_cpu;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.off    = cpumask_first(mask);
+	rv.msrs	  = msrs;
+	rv.msr_no = msr_no;
+
+	preempt_disable();
+	/*
+	 * FIXME: handle the CPU we're executing on separately for now until
+	 * smp_call_function_many has been fixed to not skip it.
+	 */
+	this_cpu = raw_smp_processor_id();
+	smp_call_function_single(this_cpu, __rdmsr_on_cpu, &rv, 1);
+
+	smp_call_function_many(mask, __rdmsr_on_cpu, &rv, 1);
+	preempt_enable();
+}
+EXPORT_SYMBOL(rdmsr_on_cpus);
+
+/*
+ * wrmsr on a bunch of CPUs
+ *
+ * @mask:       which CPUs
+ * @msr_no:     which MSR
+ * @msrs:       array of MSR values
+ *
+ */
+void wrmsr_on_cpus(const cpumask_t *mask, u32 msr_no, struct msr *msrs)
+{
+	struct msr_info rv;
+	int this_cpu;
+
+	memset(&rv, 0, sizeof(rv));
+
+	rv.off    = cpumask_first(mask);
+	rv.msrs   = msrs;
+	rv.msr_no = msr_no;
+
+	preempt_disable();
+	/*
+	 * FIXME: handle the CPU we're executing on separately for now until
+	 * smp_call_function_many has been fixed to not skip it.
+	 */
+	this_cpu = raw_smp_processor_id();
+	smp_call_function_single(this_cpu, __wrmsr_on_cpu, &rv, 1);
+
+	smp_call_function_many(mask, __wrmsr_on_cpu, &rv, 1);
+	preempt_enable();
+}
+EXPORT_SYMBOL(wrmsr_on_cpus);
 
 /* These "safe" variants are slower and should be used when the target MSR
    may not actually exist. */
@@ -55,14 +140,14 @@ static void __rdmsr_safe_on_cpu(void *info)
 {
 	struct msr_info *rv = info;
 
-	rv->err = rdmsr_safe(rv->msr_no, &rv->l, &rv->h);
+	rv->err = rdmsr_safe(rv->msr_no, &rv->reg.l, &rv->reg.h);
 }
 
 static void __wrmsr_safe_on_cpu(void *info)
 {
 	struct msr_info *rv = info;
 
-	rv->err = wrmsr_safe(rv->msr_no, rv->l, rv->h);
+	rv->err = wrmsr_safe(rv->msr_no, rv->reg.l, rv->reg.h);
 }
 
 int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
@@ -70,28 +155,29 @@ int rdmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 *l, u32 *h)
 	int err;
 	struct msr_info rv;
 
+	memset(&rv, 0, sizeof(rv));
+
 	rv.msr_no = msr_no;
 	err = smp_call_function_single(cpu, __rdmsr_safe_on_cpu, &rv, 1);
-	*l = rv.l;
-	*h = rv.h;
+	*l = rv.reg.l;
+	*h = rv.reg.h;
 
 	return err ? err : rv.err;
 }
+EXPORT_SYMBOL(rdmsr_safe_on_cpu);
 
 int wrmsr_safe_on_cpu(unsigned int cpu, u32 msr_no, u32 l, u32 h)
 {
 	int err;
 	struct msr_info rv;
 
+	memset(&rv, 0, sizeof(rv));
+
 	rv.msr_no = msr_no;
-	rv.l = l;
-	rv.h = h;
+	rv.reg.l = l;
+	rv.reg.h = h;
 	err = smp_call_function_single(cpu, __wrmsr_safe_on_cpu, &rv, 1);
 
 	return err ? err : rv.err;
 }
-
-EXPORT_SYMBOL(rdmsr_on_cpu);
-EXPORT_SYMBOL(wrmsr_on_cpu);
-EXPORT_SYMBOL(rdmsr_safe_on_cpu);
 EXPORT_SYMBOL(wrmsr_safe_on_cpu);

drivers/edac/Kconfig

@@ -49,7 +49,6 @@ config EDAC_DEBUG_VERBOSE
 
 config EDAC_MM_EDAC
 	tristate "Main Memory EDAC (Error Detection And Correction) reporting"
-	default y
 	help
 	  Some systems are able to detect and correct errors in main
 	  memory.  EDAC can report statistics on memory error
@@ -58,6 +57,31 @@ config EDAC_MM_EDAC
 	  occurred so that a particular failing memory module can be
 	  replaced.  If unsure, select 'Y'.
 
+config EDAC_AMD64
+	tristate "AMD64 (Opteron, Athlon64) K8, F10h, F11h"
+	depends on EDAC_MM_EDAC && K8_NB && X86_64 && PCI
+	help
+	  Support for error detection and correction on the AMD 64
+	  Families of Memory Controllers (K8, F10h and F11h)
+
+config EDAC_AMD64_ERROR_INJECTION
+	bool "Sysfs Error Injection facilities"
+	depends on EDAC_AMD64
+	help
+	  Recent Opterons (Family 10h and later) provide for Memory Error
+	  Injection into the ECC detection circuits. The amd64_edac module
+	  allows the operator/user to inject Uncorrectable and Correctable
+	  errors into DRAM.
+
+	  When enabled, in each of the respective memory controller directories
+	  (/sys/devices/system/edac/mc/mcX), there are 3 input files:
+
+	  - inject_section (0..3, 16-byte section of 64-byte cacheline),
+	  - inject_word (0..8, 16-bit word of 16-byte section),
+	  - inject_ecc_vector (hex ecc vector: select bits of inject word)
+
+	  In addition, there are two control files, inject_read and inject_write,
+	  which trigger the DRAM ECC Read and Write respectively.
 
 config EDAC_AMD76X
 	tristate "AMD 76x (760, 762, 768)"

drivers/edac/Makefile

@@ -30,6 +30,13 @@ obj-$(CONFIG_EDAC_I3000)		+= i3000_edac.o
 obj-$(CONFIG_EDAC_X38)			+= x38_edac.o
 obj-$(CONFIG_EDAC_I82860)		+= i82860_edac.o
 obj-$(CONFIG_EDAC_R82600)		+= r82600_edac.o
+
+amd64_edac_mod-y :=  amd64_edac_err_types.o amd64_edac.o
+amd64_edac_mod-$(CONFIG_EDAC_DEBUG) += amd64_edac_dbg.o
+amd64_edac_mod-$(CONFIG_EDAC_AMD64_ERROR_INJECTION) += amd64_edac_inj.o
+
+obj-$(CONFIG_EDAC_AMD64)		+= amd64_edac_mod.o
+
 obj-$(CONFIG_EDAC_PASEMI)		+= pasemi_edac.o
 obj-$(CONFIG_EDAC_MPC85XX)		+= mpc85xx_edac.o
 obj-$(CONFIG_EDAC_MV64X60)		+= mv64x60_edac.o

drivers/edac/amd64_edac.h

+/*
+ * AMD64 class Memory Controller kernel module
+ *
+ * Copyright (c) 2009 SoftwareBitMaker.
+ * Copyright (c) 2009 Advanced Micro Devices, Inc.
+ *
+ * This file may be distributed under the terms of the
+ * GNU General Public License.
+ *
+ *	Originally Written by Thayne Harbaugh
+ *
+ *      Changes by Douglas "norsk" Thompson  <dougthompson@xmission.com>:
+ *		- K8 CPU Revision D and greater support
+ *
+ *      Changes by Dave Peterson <dsp@llnl.gov> <dave_peterson@pobox.com>:
+ *		- Module largely rewritten, with new (and hopefully correct)
+ *		code for dealing with node and chip select interleaving,
+ *		various code cleanup, and bug fixes
+ *		- Added support for memory hoisting using DRAM hole address
+ *		register
+ *
+ *	Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
+ *		-K8 Rev (1207) revision support added, required Revision
+ *		specific mini-driver code to support Rev F as well as
+ *		prior revisions
+ *
+ *	Changes by Douglas "norsk" Thompson <dougthompson@xmission.com>:
+ *		-Family 10h revision support added. New PCI Device IDs,
+ *		indicating new changes. Actual registers modified
+ *		were slight, less than the Rev E to Rev F transition
+ *		but changing the PCI Device ID was the proper thing to
+ *		do, as it provides for almost automactic family
+ *		detection. The mods to Rev F required more family
+ *		information detection.
+ *
+ *	Changes/Fixes by Borislav Petkov <borislav.petkov@amd.com>:
+ *		- misc fixes and code cleanups
+ *
+ * This module is based on the following documents
+ * (available from http://www.amd.com/):
+ *
+ *	Title:	BIOS and Kernel Developer's Guide for AMD Athlon 64 and AMD
+ *		Opteron Processors
+ *	AMD publication #: 26094
+ *`	Revision: 3.26
+ *
+ *	Title:	BIOS and Kernel Developer's Guide for AMD NPT Family 0Fh
+ *		Processors
+ *	AMD publication #: 32559
+ *	Revision: 3.00
+ *	Issue Date: May 2006
+ *
+ *	Title:	BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h
+ *		Processors
+ *	AMD publication #: 31116
+ *	Revision: 3.00
+ *	Issue Date: September 07, 2007
+ *
+ * Sections in the first 2 documents are no longer in sync with each other.
+ * The Family 10h BKDG was totally re-written from scratch with a new
+ * presentation model.
+ * Therefore, comments that refer to a Document section might be off.
+ */
+
+#include <linux/module.h>
+#include <linux/ctype.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/slab.h>
+#include <linux/mmzone.h>
+#include <linux/edac.h>
+#include <asm/msr.h>
+#include "edac_core.h"
+
+#define amd64_printk(level, fmt, arg...) \
+	edac_printk(level, "amd64", fmt, ##arg)
+
+#define amd64_mc_printk(mci, level, fmt, arg...) \
+	edac_mc_chipset_printk(mci, level, "amd64", fmt, ##arg)
+
+/*
+ * Throughout the comments in this code, the following terms are used:
+ *
+ *	SysAddr, DramAddr, and InputAddr
+ *
+ *  These terms come directly from the amd64 documentation
+ * (AMD publication #26094).  They are defined as follows:
+ *
+ *     SysAddr:
+ *         This is a physical address generated by a CPU core or a device
+ *         doing DMA.  If generated by a CPU core, a SysAddr is the result of
+ *         a virtual to physical address translation by the CPU core's address
+ *         translation mechanism (MMU).
+ *
+ *     DramAddr:
+ *         A DramAddr is derived from a SysAddr by subtracting an offset that
+ *         depends on which node the SysAddr maps to and whether the SysAddr
+ *         is within a range affected by memory hoisting.  The DRAM Base
+ *         (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers
+ *         determine which node a SysAddr maps to.
+ *
+ *         If the DRAM Hole Address Register (DHAR) is enabled and the SysAddr
+ *         is within the range of addresses specified by this register, then
+ *         a value x from the DHAR is subtracted from the SysAddr to produce a
+ *         DramAddr.  Here, x represents the base address for the node that
+ *         the SysAddr maps to plus an offset due to memory hoisting.  See
+ *         section 3.4.8 and the comments in amd64_get_dram_hole_info() and
+ *         sys_addr_to_dram_addr() below for more information.
+ *
+ *         If the SysAddr is not affected by the DHAR then a value y is
+ *         subtracted from the SysAddr to produce a DramAddr.  Here, y is the
+ *         base address for the node that the SysAddr maps to.  See section
+ *         3.4.4 and the comments in sys_addr_to_dram_addr() below for more
+ *         information.
+ *
+ *     InputAddr:
+ *         A DramAddr is translated to an InputAddr before being passed to the
+ *         memory controller for the node that the DramAddr is associated
+ *         with.  The memory controller then maps the InputAddr to a csrow.
+ *         If node interleaving is not in use, then the InputAddr has the same
+ *         value as the DramAddr.  Otherwise, the InputAddr is produced by
+ *         discarding the bits used for node interleaving from the DramAddr.
+ *         See section 3.4.4 for more information.
+ *
+ *         The memory controller for a given node uses its DRAM CS Base and
+ *         DRAM CS Mask registers to map an InputAddr to a csrow.  See
+ *         sections 3.5.4 and 3.5.5 for more information.
+ */
+
+#define EDAC_AMD64_VERSION		" Ver: 3.2.0 " __DATE__
+#define EDAC_MOD_STR			"amd64_edac"
+
+/* Extended Model from CPUID, for CPU Revision numbers */
+#define OPTERON_CPU_LE_REV_C		0
+#define OPTERON_CPU_REV_D		1
+#define OPTERON_CPU_REV_E		2
+
+/* NPT processors have the following Extended Models */
+#define OPTERON_CPU_REV_F		4
+#define OPTERON_CPU_REV_FA		5
+
+/* Hardware limit on ChipSelect rows per MC and processors per system */
+#define CHIPSELECT_COUNT		8
+#define DRAM_REG_COUNT			8
+
+
+/*
+ * PCI-defined configuration space registers
+ */
+
+
+/*
+ * Function 1 - Address Map
+ */
+#define K8_DRAM_BASE_LOW		0x40
+#define K8_DRAM_LIMIT_LOW		0x44
+#define K8_DHAR				0xf0
+
+#define DHAR_VALID			BIT(0)
+#define F10_DRAM_MEM_HOIST_VALID	BIT(1)
+
+#define DHAR_BASE_MASK			0xff000000
+#define dhar_base(dhar)			(dhar & DHAR_BASE_MASK)
+
+#define K8_DHAR_OFFSET_MASK		0x0000ff00
+#define k8_dhar_offset(dhar)		((dhar & K8_DHAR_OFFSET_MASK) << 16)
+
+#define F10_DHAR_OFFSET_MASK		0x0000ff80
+					/* NOTE: Extra mask bit vs K8 */
+#define f10_dhar_offset(dhar)		((dhar & F10_DHAR_OFFSET_MASK) << 16)
+
+
+/* F10 High BASE/LIMIT registers */
+#define F10_DRAM_BASE_HIGH		0x140
+#define F10_DRAM_LIMIT_HIGH		0x144
+
+
+/*
+ * Function 2 - DRAM controller
+ */
+#define K8_DCSB0			0x40
+#define F10_DCSB1			0x140
+
+#define K8_DCSB_CS_ENABLE		BIT(0)
+#define K8_DCSB_NPT_SPARE		BIT(1)
+#define K8_DCSB_NPT_TESTFAIL		BIT(2)
+
+/*
+ * REV E: select [31:21] and [15:9] from DCSB and the shift amount to form
+ * the address
+ */
+#define REV_E_DCSB_BASE_BITS		(0xFFE0FE00ULL)
+#define REV_E_DCS_SHIFT			4
+#define REV_E_DCSM_COUNT		8
+
+#define REV_F_F1Xh_DCSB_BASE_BITS	(0x1FF83FE0ULL)
+#define REV_F_F1Xh_DCS_SHIFT		8
+
+/*
+ * REV F and later: selects [28:19] and [13:5] from DCSB and the shift amount
+ * to form the address
+ */
+#define REV_F_DCSB_BASE_BITS		(0x1FF83FE0ULL)
+#define REV_F_DCS_SHIFT			8
+#define REV_F_DCSM_COUNT		4
+#define F10_DCSM_COUNT			4
+#define F11_DCSM_COUNT			2
+
+/* DRAM CS Mask Registers */
+#define K8_DCSM0			0x60
+#define F10_DCSM1			0x160
+
+/* REV E: select [29:21] and [15:9] from DCSM */
+#define REV_E_DCSM_MASK_BITS		0x3FE0FE00
+
+/* unused bits [24:20] and [12:0] */
+#define REV_E_DCS_NOTUSED_BITS		0x01F01FFF
+
+/* REV F and later: select [28:19] and [13:5] from DCSM */
+#define REV_F_F1Xh_DCSM_MASK_BITS	0x1FF83FE0
+
+/* unused bits [26:22] and [12:0] */
+#define REV_F_F1Xh_DCS_NOTUSED_BITS	0x07C01FFF
+
+#define DBAM0				0x80
+#define DBAM1				0x180
+
+/* Extract the DIMM 'type' on the i'th DIMM from the DBAM reg value passed */
+#define DBAM_DIMM(i, reg)		((((reg) >> (4*i))) & 0xF)
+
+#define DBAM_MAX_VALUE			11
+
+
+#define F10_DCLR_0			0x90
+#define F10_DCLR_1			0x190
+#define REVE_WIDTH_128			BIT(16)
+#define F10_WIDTH_128			BIT(11)
+
+
+#define F10_DCHR_0			0x94
+#define F10_DCHR_1			0x194
+
+#define F10_DCHR_FOUR_RANK_DIMM		BIT(18)
+#define F10_DCHR_Ddr3Mode		BIT(8)
+#define F10_DCHR_MblMode		BIT(6)
+
+
+#define F10_DCTL_SEL_LOW		0x110
+
+#define dct_sel_baseaddr(pvt)    \
+	((pvt->dram_ctl_select_low) & 0xFFFFF800)
+
+#define dct_sel_interleave_addr(pvt)    \
+	(((pvt->dram_ctl_select_low) >> 6) & 0x3)
+
+enum {
+	F10_DCTL_SEL_LOW_DctSelHiRngEn	= BIT(0),
+	F10_DCTL_SEL_LOW_DctSelIntLvEn	= BIT(2),
+	F10_DCTL_SEL_LOW_DctGangEn	= BIT(4),
+	F10_DCTL_SEL_LOW_DctDatIntLv	= BIT(5),
+	F10_DCTL_SEL_LOW_DramEnable	= BIT(8),
+	F10_DCTL_SEL_LOW_MemCleared	= BIT(10),
+};
+
+#define    dct_high_range_enabled(pvt)    \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelHiRngEn)
+
+#define dct_interleave_enabled(pvt)	   \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctSelIntLvEn)
+
+#define dct_ganging_enabled(pvt)        \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctGangEn)
+
+#define dct_data_intlv_enabled(pvt)    \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DctDatIntLv)
+
+#define dct_dram_enabled(pvt)    \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_DramEnable)
+
+#define dct_memory_cleared(pvt)    \
+	(pvt->dram_ctl_select_low & F10_DCTL_SEL_LOW_MemCleared)
+
+
+#define F10_DCTL_SEL_HIGH		0x114
+
+
+/*
+ * Function 3 - Misc Control
+ */
+#define K8_NBCTL			0x40
+
+/* Correctable ECC error reporting enable */
+#define K8_NBCTL_CECCEn			BIT(0)
+
+/* UnCorrectable ECC error reporting enable */
+#define K8_NBCTL_UECCEn			BIT(1)
+
+#define K8_NBCFG			0x44
+#define K8_NBCFG_CHIPKILL		BIT(23)
+#define K8_NBCFG_ECC_ENABLE		BIT(22)
+
+#define K8_NBSL				0x48
+
+
+#define EXTRACT_HIGH_SYNDROME(x)	(((x) >> 24) & 0xff)
+#define EXTRACT_EXT_ERROR_CODE(x)	(((x) >> 16) & 0x1f)
+
+/* Family F10h: Normalized Extended Error Codes */
+#define F10_NBSL_EXT_ERR_RES		0x0
+#define F10_NBSL_EXT_ERR_CRC		0x1
+#define F10_NBSL_EXT_ERR_SYNC		0x2
+#define F10_NBSL_EXT_ERR_MST		0x3
+#define F10_NBSL_EXT_ERR_TGT		0x4
+#define F10_NBSL_EXT_ERR_GART		0x5
+#define F10_NBSL_EXT_ERR_RMW		0x6
+#define F10_NBSL_EXT_ERR_WDT		0x7
+#define F10_NBSL_EXT_ERR_ECC		0x8
+#define F10_NBSL_EXT_ERR_DEV		0x9
+#define F10_NBSL_EXT_ERR_LINK_DATA	0xA
+
+/* Next two are overloaded values */
+#define F10_NBSL_EXT_ERR_LINK_PROTO	0xB
+#define F10_NBSL_EXT_ERR_L3_PROTO	0xB
+
+#define F10_NBSL_EXT_ERR_NB_ARRAY	0xC
+#define F10_NBSL_EXT_ERR_DRAM_PARITY	0xD
+#define F10_NBSL_EXT_ERR_LINK_RETRY	0xE
+
+/* Next two are overloaded values */
+#define F10_NBSL_EXT_ERR_GART_WALK	0xF
+#define F10_NBSL_EXT_ERR_DEV_WALK	0xF
+
+/* 0x10 to 0x1B: Reserved */
+#define F10_NBSL_EXT_ERR_L3_DATA	0x1C
+#define F10_NBSL_EXT_ERR_L3_TAG		0x1D
+#define F10_NBSL_EXT_ERR_L3_LRU		0x1E
+
+/* K8: Normalized Extended Error Codes */
+#define K8_NBSL_EXT_ERR_ECC		0x0
+#define K8_NBSL_EXT_ERR_CRC		0x1
+#define K8_NBSL_EXT_ERR_SYNC		0x2
+#define K8_NBSL_EXT_ERR_MST		0x3
+#define K8_NBSL_EXT_ERR_TGT		0x4
+#define K8_NBSL_EXT_ERR_GART		0x5
+#define K8_NBSL_EXT_ERR_RMW		0x6
+#define K8_NBSL_EXT_ERR_WDT		0x7
+#define K8_NBSL_EXT_ERR_CHIPKILL_ECC	0x8
+#define K8_NBSL_EXT_ERR_DRAM_PARITY	0xD
+
+#define EXTRACT_ERROR_CODE(x)		((x) & 0xffff)
+#define	TEST_TLB_ERROR(x)		(((x) & 0xFFF0) == 0x0010)
+#define	TEST_MEM_ERROR(x)		(((x) & 0xFF00) == 0x0100)
+#define	TEST_BUS_ERROR(x)		(((x) & 0xF800) == 0x0800)
+#define	EXTRACT_TT_CODE(x)		(((x) >> 2) & 0x3)
+#define	EXTRACT_II_CODE(x)		(((x) >> 2) & 0x3)
+#define	EXTRACT_LL_CODE(x)		(((x) >> 0) & 0x3)
+#define	EXTRACT_RRRR_CODE(x)		(((x) >> 4) & 0xf)
+#define	EXTRACT_TO_CODE(x)		(((x) >> 8) & 0x1)
+#define	EXTRACT_PP_CODE(x)		(((x) >> 9) & 0x3)
+
+/*
+ * The following are for BUS type errors AFTER values have been normalized by
+ * shifting right
+ */
+#define K8_NBSL_PP_SRC			0x0
+#define K8_NBSL_PP_RES			0x1
+#define K8_NBSL_PP_OBS			0x2
+#define K8_NBSL_PP_GENERIC		0x3
+
+
+#define K8_NBSH				0x4C
+
+#define K8_NBSH_VALID_BIT		BIT(31)
+#define K8_NBSH_OVERFLOW		BIT(30)
+#define K8_NBSH_UNCORRECTED_ERR		BIT(29)
+#define K8_NBSH_ERR_ENABLE		BIT(28)
+#define K8_NBSH_MISC_ERR_VALID		BIT(27)
+#define K8_NBSH_VALID_ERROR_ADDR	BIT(26)
+#define K8_NBSH_PCC			BIT(25)
+#define K8_NBSH_CECC			BIT(14)
+#define K8_NBSH_UECC			BIT(13)
+#define K8_NBSH_ERR_SCRUBER		BIT(8)
+#define K8_NBSH_CORE3			BIT(3)
+#define K8_NBSH_CORE2			BIT(2)
+#define K8_NBSH_CORE1			BIT(1)
+#define K8_NBSH_CORE0			BIT(0)
+
+#define EXTRACT_LDT_LINK(x)		(((x) >> 4) & 0x7)
+#define EXTRACT_ERR_CPU_MAP(x)		((x) & 0xF)
+#define EXTRACT_LOW_SYNDROME(x)		(((x) >> 15) & 0xff)
+
+
+#define K8_NBEAL			0x50
+#define K8_NBEAH			0x54
+#define K8_SCRCTRL			0x58
+
+#define F10_NB_CFG_LOW			0x88
+#define	F10_NB_CFG_LOW_ENABLE_EXT_CFG	BIT(14)
+
+#define F10_NB_CFG_HIGH			0x8C
+
+#define F10_ONLINE_SPARE		0xB0
+#define F10_ONLINE_SPARE_SWAPDONE0(x)	((x) & BIT(1))
+#define F10_ONLINE_SPARE_SWAPDONE1(x)	((x) & BIT(3))
+#define F10_ONLINE_SPARE_BADDRAM_CS0(x) (((x) >> 4) & 0x00000007)
+#define F10_ONLINE_SPARE_BADDRAM_CS1(x) (((x) >> 8) & 0x00000007)
+
+#define F10_NB_ARRAY_ADDR		0xB8
+
+#define F10_NB_ARRAY_DRAM_ECC		0x80000000
+
+/* Bits [2:1] are used to select 16-byte section within a 64-byte cacheline  */
+#define SET_NB_ARRAY_ADDRESS(section)	(((section) & 0x3) << 1)
+
+#define F10_NB_ARRAY_DATA		0xBC
+
+#define SET_NB_DRAM_INJECTION_WRITE(word, bits)  \
+					(BIT(((word) & 0xF) + 20) | \
+					BIT(17) |  \
+					((bits) & 0xF))
+
+#define SET_NB_DRAM_INJECTION_READ(word, bits)  \
+					(BIT(((word) & 0xF) + 20) | \
+					BIT(16) |  \
+					((bits) & 0xF))
+
+#define K8_NBCAP			0xE8
+#define K8_NBCAP_CORES			(BIT(12)|BIT(13))
+#define K8_NBCAP_CHIPKILL		BIT(4)
+#define K8_NBCAP_SECDED			BIT(3)
+#define K8_NBCAP_8_NODE			BIT(2)
+#define K8_NBCAP_DUAL_NODE		BIT(1)
+#define K8_NBCAP_DCT_DUAL		BIT(0)
+
+/*
+ * MSR Regs
+ */
+#define K8_MSR_MCGCTL			0x017b
+#define K8_MSR_MCGCTL_NBE		BIT(4)
+
+#define K8_MSR_MC4CTL			0x0410
+#define K8_MSR_MC4STAT			0x0411
+#define K8_MSR_MC4ADDR			0x0412
+
+/* AMD sets the first MC device at device ID 0x18. */
+static inline int get_mc_node_id_from_pdev(struct pci_dev *pdev)
+{
+	return PCI_SLOT(pdev->devfn) - 0x18;
+}
+
+enum amd64_chipset_families {
+	K8_CPUS = 0,
+	F10_CPUS,
+	F11_CPUS,
+};
+
+/*
+ * Structure to hold:
+ *
+ * 1) dynamically read status and error address HW registers
+ * 2) sysfs entered values
+ * 3) MCE values
+ *
+ * Depends on entry into the modules
+ */
+struct amd64_error_info_regs {
+	u32 nbcfg;
+	u32 nbsh;
+	u32 nbsl;
+	u32 nbeah;
+	u32 nbeal;
+};
+
+/* Error injection control structure */
+struct error_injection {
+	u32	section;
+	u32	word;
+	u32	bit_map;
+};
+
+struct amd64_pvt {
+	/* pci_device handles which we utilize */
+	struct pci_dev *addr_f1_ctl;
+	struct pci_dev *dram_f2_ctl;
+	struct pci_dev *misc_f3_ctl;
+
+	int mc_node_id;		/* MC index of this MC node */
+	int ext_model;		/* extended model value of this node */
+
+	struct low_ops *ops;	/* pointer to per PCI Device ID func table */
+
+	int channel_count;
+
+	/* Raw registers */
+	u32 dclr0;		/* DRAM Configuration Low DCT0 reg */
+	u32 dclr1;		/* DRAM Configuration Low DCT1 reg */
+	u32 dchr0;		/* DRAM Configuration High DCT0 reg */
+	u32 dchr1;		/* DRAM Configuration High DCT1 reg */
+	u32 nbcap;		/* North Bridge Capabilities */
+	u32 nbcfg;		/* F10 North Bridge Configuration */
+	u32 ext_nbcfg;		/* Extended F10 North Bridge Configuration */
+	u32 dhar;		/* DRAM Hoist reg */
+	u32 dbam0;		/* DRAM Base Address Mapping reg for DCT0 */
+	u32 dbam1;		/* DRAM Base Address Mapping reg for DCT1 */
+
+	/* DRAM CS Base Address Registers F2x[1,0][5C:40] */
+	u32 dcsb0[CHIPSELECT_COUNT];
+	u32 dcsb1[CHIPSELECT_COUNT];
+
+	/* DRAM CS Mask Registers F2x[1,0][6C:60] */
+	u32 dcsm0[CHIPSELECT_COUNT];
+	u32 dcsm1[CHIPSELECT_COUNT];
+
+	/*
+	 * Decoded parts of DRAM BASE and LIMIT Registers
+	 * F1x[78,70,68,60,58,50,48,40]
+	 */
+	u64 dram_base[DRAM_REG_COUNT];
+	u64 dram_limit[DRAM_REG_COUNT];
+	u8  dram_IntlvSel[DRAM_REG_COUNT];
+	u8  dram_IntlvEn[DRAM_REG_COUNT];
+	u8  dram_DstNode[DRAM_REG_COUNT];
+	u8  dram_rw_en[DRAM_REG_COUNT];
+
+	/*
+	 * The following fields are set at (load) run time, after CPU revision
+	 * has been determined, since the dct_base and dct_mask registers vary
+	 * based on revision
+	 */
+	u32 dcsb_base;		/* DCSB base bits */
+	u32 dcsm_mask;		/* DCSM mask bits */
+	u32 num_dcsm;		/* Number of DCSM registers */
+	u32 dcs_mask_notused;	/* DCSM notused mask bits */
+	u32 dcs_shift;		/* DCSB and DCSM shift value */
+
+	u64 top_mem;		/* top of memory below 4GB */
+	u64 top_mem2;		/* top of memory above 4GB */
+
+	u32 dram_ctl_select_low;	/* DRAM Controller Select Low Reg */
+	u32 dram_ctl_select_high;	/* DRAM Controller Select High Reg */
+	u32 online_spare;               /* On-Line spare Reg */
+
+	/* temp storage for when input is received from sysfs */
+	struct amd64_error_info_regs ctl_error_info;
+
+	/* place to store error injection parameters prior to issue */
+	struct error_injection injection;
+
+	/* Save old hw registers' values before we modified them */
+	u32 nbctl_mcgctl_saved;		/* When true, following 2 are valid */
+	u32 old_nbctl;
+	unsigned long old_mcgctl;	/* per core on this node */
+
+	/* MC Type Index value: socket F vs Family 10h */
+	u32 mc_type_index;
+
+	/* misc settings */
+	struct flags {
+		unsigned long cf8_extcfg:1;
+	} flags;
+};
+
+struct scrubrate {
+       u32 scrubval;           /* bit pattern for scrub rate */
+       u32 bandwidth;          /* bandwidth consumed (bytes/sec) */
+};
+
+extern struct scrubrate scrubrates[23];
+extern u32 revf_quad_ddr2_shift[16];
+extern const char *tt_msgs[4];
+extern const char *ll_msgs[4];
+extern const char *rrrr_msgs[16];
+extern const char *to_msgs[2];
+extern const char *pp_msgs[4];
+extern const char *ii_msgs[4];
+extern const char *ext_msgs[32];
+extern const char *htlink_msgs[8];
+
+#ifdef CONFIG_EDAC_DEBUG
+#define NUM_DBG_ATTRS 9
+#else
+#define NUM_DBG_ATTRS 0
+#endif
+
+#ifdef CONFIG_EDAC_AMD64_ERROR_INJECTION
+#define NUM_INJ_ATTRS 5
+#else
+#define NUM_INJ_ATTRS 0
+#endif
+
+extern struct mcidev_sysfs_attribute amd64_dbg_attrs[NUM_DBG_ATTRS],
+				     amd64_inj_attrs[NUM_INJ_ATTRS];
+
+/*
+ * Each of the PCI Device IDs types have their own set of hardware accessor
+ * functions and per device encoding/decoding logic.
+ */
+struct low_ops {
+	int (*probe_valid_hardware)(struct amd64_pvt *pvt);
+	int (*early_channel_count)(struct amd64_pvt *pvt);
+
+	u64 (*get_error_address)(struct mem_ctl_info *mci,
+			struct amd64_error_info_regs *info);
+	void (*read_dram_base_limit)(struct amd64_pvt *pvt, int dram);
+	void (*read_dram_ctl_register)(struct amd64_pvt *pvt);
+	void (*map_sysaddr_to_csrow)(struct mem_ctl_info *mci,
+					struct amd64_error_info_regs *info,
+					u64 SystemAddr);
+	int (*dbam_map_to_pages)(struct amd64_pvt *pvt, int dram_map);
+};
+
+struct amd64_family_type {
+	const char *ctl_name;
+	u16 addr_f1_ctl;
+	u16 misc_f3_ctl;
+	struct low_ops ops;
+};
+
+static struct amd64_family_type amd64_family_types[];
+
+static inline const char *get_amd_family_name(int index)
+{
+	return amd64_family_types[index].ctl_name;
+}
+
+static inline struct low_ops *family_ops(int index)
+{
+	return &amd64_family_types[index].ops;
+}
+
+/*
+ * For future CPU versions, verify the following as new 'slow' rates appear and
+ * modify the necessary skip values for the supported CPU.
+ */
+#define K8_MIN_SCRUB_RATE_BITS	0x0
+#define F10_MIN_SCRUB_RATE_BITS	0x5
+#define F11_MIN_SCRUB_RATE_BITS	0x6
+
+int amd64_process_error_info(struct mem_ctl_info *mci,
+			     struct amd64_error_info_regs *info,
+			     int handle_errors);
+int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
+			     u64 *hole_offset, u64 *hole_size);

drivers/edac/amd64_edac_dbg.c

+#include "amd64_edac.h"
+
+/*
+ * accept a hex value and store it into the virtual error register file, field:
+ * nbeal and nbeah. Assume virtual error values have already been set for: NBSL,
+ * NBSH and NBCFG. Then proceed to map the error values to a MC, CSROW and
+ * CHANNEL
+ */
+static ssize_t amd64_nbea_store(struct mem_ctl_info *mci, const char *data,
+				size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long long value;
+	int ret = 0;
+
+	ret = strict_strtoull(data, 16, &value);
+	if (ret != -EINVAL) {
+		debugf0("received NBEA= 0x%llx\n", value);
+
+		/* place the value into the virtual error packet */
+		pvt->ctl_error_info.nbeal = (u32) value;
+		value >>= 32;
+		pvt->ctl_error_info.nbeah = (u32) value;
+
+		/* Process the Mapping request */
+		/* TODO: Add race prevention */
+		amd64_process_error_info(mci, &pvt->ctl_error_info, 1);
+
+		return count;
+	}
+	return ret;
+}
+
+/* display back what the last NBEA (MCA NB Address (MC4_ADDR)) was written */
+static ssize_t amd64_nbea_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u64 value;
+
+	value = pvt->ctl_error_info.nbeah;
+	value <<= 32;
+	value |= pvt->ctl_error_info.nbeal;
+
+	return sprintf(data, "%llx\n", value);
+}
+
+/* store the NBSL (MCA NB Status Low (MC4_STATUS)) value user desires */
+static ssize_t amd64_nbsl_store(struct mem_ctl_info *mci, const char *data,
+				size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 16, &value);
+	if (ret != -EINVAL) {
+		debugf0("received NBSL= 0x%lx\n", value);
+
+		pvt->ctl_error_info.nbsl = (u32) value;
+
+		return count;
+	}
+	return ret;
+}
+
+/* display back what the last NBSL value written */
+static ssize_t amd64_nbsl_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 value;
+
+	value = pvt->ctl_error_info.nbsl;
+
+	return sprintf(data, "%x\n", value);
+}
+
+/* store the NBSH (MCA NB Status High) value user desires */
+static ssize_t amd64_nbsh_store(struct mem_ctl_info *mci, const char *data,
+				size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 16, &value);
+	if (ret != -EINVAL) {
+		debugf0("received NBSH= 0x%lx\n", value);
+
+		pvt->ctl_error_info.nbsh = (u32) value;
+
+		return count;
+	}
+	return ret;
+}
+
+/* display back what the last NBSH value written */
+static ssize_t amd64_nbsh_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	u32 value;
+
+	value = pvt->ctl_error_info.nbsh;
+
+	return sprintf(data, "%x\n", value);
+}
+
+/* accept and store the NBCFG (MCA NB Configuration) value user desires */
+static ssize_t amd64_nbcfg_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 16, &value);
+	if (ret != -EINVAL) {
+		debugf0("received NBCFG= 0x%lx\n", value);
+
+		pvt->ctl_error_info.nbcfg = (u32) value;
+
+		return count;
+	}
+	return ret;
+}
+
+/* various show routines for the controls of a MCI */
+static ssize_t amd64_nbcfg_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%x\n", pvt->ctl_error_info.nbcfg);
+}
+
+
+static ssize_t amd64_dhar_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%x\n", pvt->dhar);
+}
+
+
+static ssize_t amd64_dbam_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%x\n", pvt->dbam0);
+}
+
+
+static ssize_t amd64_topmem_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%llx\n", pvt->top_mem);
+}
+
+
+static ssize_t amd64_topmem2_show(struct mem_ctl_info *mci, char *data)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+
+	return sprintf(data, "%llx\n", pvt->top_mem2);
+}
+
+static ssize_t amd64_hole_show(struct mem_ctl_info *mci, char *data)
+{
+	u64 hole_base = 0;
+	u64 hole_offset = 0;
+	u64 hole_size = 0;
+
+	amd64_get_dram_hole_info(mci, &hole_base, &hole_offset, &hole_size);
+
+	return sprintf(data, "%llx %llx %llx\n", hole_base, hole_offset,
+						 hole_size);
+}
+
+/*
+ * update NUM_DBG_ATTRS in case you add new members
+ */
+struct mcidev_sysfs_attribute amd64_dbg_attrs[] = {
+
+	{
+		.attr = {
+			.name = "nbea_ctl",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = amd64_nbea_show,
+		.store = amd64_nbea_store,
+	},
+	{
+		.attr = {
+			.name = "nbsl_ctl",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = amd64_nbsl_show,
+		.store = amd64_nbsl_store,
+	},
+	{
+		.attr = {
+			.name = "nbsh_ctl",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = amd64_nbsh_show,
+		.store = amd64_nbsh_store,
+	},
+	{
+		.attr = {
+			.name = "nbcfg_ctl",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = amd64_nbcfg_show,
+		.store = amd64_nbcfg_store,
+	},
+	{
+		.attr = {
+			.name = "dhar",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_dhar_show,
+		.store = NULL,
+	},
+	{
+		.attr = {
+			.name = "dbam",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_dbam_show,
+		.store = NULL,
+	},
+	{
+		.attr = {
+			.name = "topmem",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_topmem_show,
+		.store = NULL,
+	},
+	{
+		.attr = {
+			.name = "topmem2",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_topmem2_show,
+		.store = NULL,
+	},
+	{
+		.attr = {
+			.name = "dram_hole",
+			.mode = (S_IRUGO)
+		},
+		.show = amd64_hole_show,
+		.store = NULL,
+	},
+};

drivers/edac/amd64_edac_err_types.c

+#include "amd64_edac.h"
+
+/*
+ * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
+ * for DDR2 DRAM mapping.
+ */
+u32 revf_quad_ddr2_shift[] = {
+	0,	/* 0000b NULL DIMM (128mb) */
+	28,	/* 0001b 256mb */
+	29,	/* 0010b 512mb */
+	29,	/* 0011b 512mb */
+	29,	/* 0100b 512mb */
+	30,	/* 0101b 1gb */
+	30,	/* 0110b 1gb */
+	31,	/* 0111b 2gb */
+	31,	/* 1000b 2gb */
+	32,	/* 1001b 4gb */
+	32,	/* 1010b 4gb */
+	33,	/* 1011b 8gb */
+	0,	/* 1100b future */
+	0,	/* 1101b future */
+	0,	/* 1110b future */
+	0	/* 1111b future */
+};
+
+/*
+ * Valid scrub rates for the K8 hardware memory scrubber. We map the scrubbing
+ * bandwidth to a valid bit pattern. The 'set' operation finds the 'matching-
+ * or higher value'.
+ *
+ *FIXME: Produce a better mapping/linearisation.
+ */
+
+struct scrubrate scrubrates[] = {
+	{ 0x01, 1600000000UL},
+	{ 0x02, 800000000UL},
+	{ 0x03, 400000000UL},
+	{ 0x04, 200000000UL},
+	{ 0x05, 100000000UL},
+	{ 0x06, 50000000UL},
+	{ 0x07, 25000000UL},
+	{ 0x08, 12284069UL},
+	{ 0x09, 6274509UL},
+	{ 0x0A, 3121951UL},
+	{ 0x0B, 1560975UL},
+	{ 0x0C, 781440UL},
+	{ 0x0D, 390720UL},
+	{ 0x0E, 195300UL},
+	{ 0x0F, 97650UL},
+	{ 0x10, 48854UL},
+	{ 0x11, 24427UL},
+	{ 0x12, 12213UL},
+	{ 0x13, 6101UL},
+	{ 0x14, 3051UL},
+	{ 0x15, 1523UL},
+	{ 0x16, 761UL},
+	{ 0x00, 0UL},        /* scrubbing off */
+};
+
+/*
+ * string representation for the different MCA reported error types, see F3x48
+ * or MSR0000_0411.
+ */
+const char *tt_msgs[] = {        /* transaction type */
+	"instruction",
+	"data",
+	"generic",
+	"reserved"
+};
+
+const char *ll_msgs[] = {	/* cache level */
+	"L0",
+	"L1",
+	"L2",
+	"L3/generic"
+};
+
+const char *rrrr_msgs[] = {
+	"generic",
+	"generic read",
+	"generic write",
+	"data read",
+	"data write",
+	"inst fetch",
+	"prefetch",
+	"evict",
+	"snoop",
+	"reserved RRRR= 9",
+	"reserved RRRR= 10",
+	"reserved RRRR= 11",
+	"reserved RRRR= 12",
+	"reserved RRRR= 13",
+	"reserved RRRR= 14",
+	"reserved RRRR= 15"
+};
+
+const char *pp_msgs[] = {	/* participating processor */
+	"local node originated (SRC)",
+	"local node responded to request (RES)",
+	"local node observed as 3rd party (OBS)",
+	"generic"
+};
+
+const char *to_msgs[] = {
+	"no timeout",
+	"timed out"
+};
+
+const char *ii_msgs[] = {	/* memory or i/o */
+	"mem access",
+	"reserved",
+	"i/o access",
+	"generic"
+};
+
+/* Map the 5 bits of Extended Error code to the string table. */
+const char *ext_msgs[] = {	/* extended error */
+	"K8 ECC error/F10 reserved",	/* 0_0000b */
+	"CRC error",			/* 0_0001b */
+	"sync error",			/* 0_0010b */
+	"mst abort",			/* 0_0011b */
+	"tgt abort",			/* 0_0100b */
+	"GART error",			/* 0_0101b */
+	"RMW error",			/* 0_0110b */
+	"Wdog timer error",		/* 0_0111b */
+	"F10-ECC/K8-Chipkill error",	/* 0_1000b */
+	"DEV Error",			/* 0_1001b */
+	"Link Data error",		/* 0_1010b */
+	"Link or L3 Protocol error",	/* 0_1011b */
+	"NB Array error",		/* 0_1100b */
+	"DRAM Parity error",		/* 0_1101b */
+	"Link Retry/GART Table Walk/DEV Table Walk error", /* 0_1110b */
+	"Res 0x0ff error",		/* 0_1111b */
+	"Res 0x100 error",		/* 1_0000b */
+	"Res 0x101 error",		/* 1_0001b */
+	"Res 0x102 error",		/* 1_0010b */
+	"Res 0x103 error",		/* 1_0011b */
+	"Res 0x104 error",		/* 1_0100b */
+	"Res 0x105 error",		/* 1_0101b */
+	"Res 0x106 error",		/* 1_0110b */
+	"Res 0x107 error",		/* 1_0111b */
+	"Res 0x108 error",		/* 1_1000b */
+	"Res 0x109 error",		/* 1_1001b */
+	"Res 0x10A error",		/* 1_1010b */
+	"Res 0x10B error",		/* 1_1011b */
+	"L3 Cache Data error",		/* 1_1100b */
+	"L3 CacheTag error",		/* 1_1101b */
+	"L3 Cache LRU error",		/* 1_1110b */
+	"Res 0x1FF error"		/* 1_1111b */
+};
+
+const char *htlink_msgs[] = {
+	"none",
+	"1",
+	"2",
+	"1 2",
+	"3",
+	"1 3",
+	"2 3",
+	"1 2 3"
+};

drivers/edac/amd64_edac_inj.c

+#include "amd64_edac.h"
+
+/*
+ * store error injection section value which refers to one of 4 16-byte sections
+ * within a 64-byte cacheline
+ *
+ * range: 0..3
+ */
+static ssize_t amd64_inject_section_store(struct mem_ctl_info *mci,
+					  const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 10, &value);
+	if (ret != -EINVAL) {
+		pvt->injection.section = (u32) value;
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * store error injection word value which refers to one of 9 16-bit word of the
+ * 16-byte (128-bit + ECC bits) section
+ *
+ * range: 0..8
+ */
+static ssize_t amd64_inject_word_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 10, &value);
+	if (ret != -EINVAL) {
+
+		value = (value <= 8) ? value : 0;
+		pvt->injection.word = (u32) value;
+
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * store 16 bit error injection vector which enables injecting errors to the
+ * corresponding bit within the error injection word above. When used during a
+ * DRAM ECC read, it holds the contents of the of the DRAM ECC bits.
+ */
+static ssize_t amd64_inject_ecc_vector_store(struct mem_ctl_info *mci,
+					     const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 16, &value);
+	if (ret != -EINVAL) {
+
+		pvt->injection.bit_map = (u32) value & 0xFFFF;
+
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * Do a DRAM ECC read. Assemble staged values in the pvt area, format into
+ * fields needed by the injection registers and read the NB Array Data Port.
+ */
+static ssize_t amd64_inject_read_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	u32 section, word_bits;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 10, &value);
+	if (ret != -EINVAL) {
+
+		/* Form value to choose 16-byte section of cacheline */
+		section = F10_NB_ARRAY_DRAM_ECC |
+				SET_NB_ARRAY_ADDRESS(pvt->injection.section);
+		pci_write_config_dword(pvt->misc_f3_ctl,
+					F10_NB_ARRAY_ADDR, section);
+
+		word_bits = SET_NB_DRAM_INJECTION_READ(pvt->injection.word,
+						pvt->injection.bit_map);
+
+		/* Issue 'word' and 'bit' along with the READ request */
+		pci_write_config_dword(pvt->misc_f3_ctl,
+					F10_NB_ARRAY_DATA, word_bits);
+
+		debugf0("section=0x%x word_bits=0x%x\n", section, word_bits);
+
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * Do a DRAM ECC write. Assemble staged values in the pvt area and format into
+ * fields needed by the injection registers.
+ */
+static ssize_t amd64_inject_write_store(struct mem_ctl_info *mci,
+					const char *data, size_t count)
+{
+	struct amd64_pvt *pvt = mci->pvt_info;
+	unsigned long value;
+	u32 section, word_bits;
+	int ret = 0;
+
+	ret = strict_strtoul(data, 10, &value);
+	if (ret != -EINVAL) {
+
+		/* Form value to choose 16-byte section of cacheline */
+		section = F10_NB_ARRAY_DRAM_ECC |
+				SET_NB_ARRAY_ADDRESS(pvt->injection.section);
+		pci_write_config_dword(pvt->misc_f3_ctl,
+					F10_NB_ARRAY_ADDR, section);
+
+		word_bits = SET_NB_DRAM_INJECTION_WRITE(pvt->injection.word,
+						pvt->injection.bit_map);
+
+		/* Issue 'word' and 'bit' along with the READ request */
+		pci_write_config_dword(pvt->misc_f3_ctl,
+					F10_NB_ARRAY_DATA, word_bits);
+
+		debugf0("section=0x%x word_bits=0x%x\n", section, word_bits);
+
+		return count;
+	}
+	return ret;
+}
+
+/*
+ * update NUM_INJ_ATTRS in case you add new members
+ */
+struct mcidev_sysfs_attribute amd64_inj_attrs[] = {
+
+	{
+		.attr = {
+			.name = "inject_section",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_section_store,
+	},
+	{
+		.attr = {
+			.name = "inject_word",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_word_store,
+	},
+	{
+		.attr = {
+			.name = "inject_ecc_vector",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_ecc_vector_store,
+	},
+	{
+		.attr = {
+			.name = "inject_write",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_write_store,
+	},
+	{
+		.attr = {
+			.name = "inject_read",
+			.mode = (S_IRUGO | S_IWUSR)
+		},
+		.show = NULL,
+		.store = amd64_inject_read_store,
+	},
+};

drivers/edac/edac_core.h

@@ -76,10 +76,11 @@
 extern int edac_debug_level;
 
 #ifndef CONFIG_EDAC_DEBUG_VERBOSE
-#define edac_debug_printk(level, fmt, arg...)                            \
-	do {                                                             \
-		if (level <= edac_debug_level)                           \
-			edac_printk(KERN_DEBUG, EDAC_DEBUG, fmt, ##arg); \
+#define edac_debug_printk(level, fmt, arg...)                           \
+	do {                                                            \
+		if (level <= edac_debug_level)                          \
+			edac_printk(KERN_DEBUG, EDAC_DEBUG,		\
+				    "%s: " fmt, __func__, ##arg);	\
 	} while (0)
 #else  /* CONFIG_EDAC_DEBUG_VERBOSE */
 #define edac_debug_printk(level, fmt, arg...)                            \