drm/i2c: tda998x: always disable and clear interrupts at probe

Always disable and clear interrupts at probe time to ensure that the
TDA998x is in a sane state.  This ensures that the interrupt line,
which is also the CEC clock calibration signal, is always deasserted.
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk>

drivers/gpu/drm/i2c/tda998x_drv.c

@@ -1546,6 +1546,15 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 	cec_write(priv, REG_CEC_FRO_IM_CLK_CTRL,
 			CEC_FRO_IM_CLK_CTRL_GHOST_DIS | CEC_FRO_IM_CLK_CTRL_IMCLK_SEL);
 
+	/* ensure interrupts are disabled */
+	cec_write(priv, REG_CEC_RXSHPDINTENA, 0);
+
+	/* clear pending interrupts */
+	cec_read(priv, REG_CEC_RXSHPDINT);
+	reg_read(priv, REG_INT_FLAGS_0);
+	reg_read(priv, REG_INT_FLAGS_1);
+	reg_read(priv, REG_INT_FLAGS_2);
+
 	/* initialize the optional IRQ */
 	if (client->irq) {
 		unsigned long irq_flags;
@@ -1553,11 +1562,6 @@ static int tda998x_create(struct i2c_client *client, struct tda998x_priv *priv)
 		/* init read EDID waitqueue and HDP work */
 		init_waitqueue_head(&priv->wq_edid);
 
-		/* clear pending interrupts */
-		reg_read(priv, REG_INT_FLAGS_0);
-		reg_read(priv, REG_INT_FLAGS_1);
-		reg_read(priv, REG_INT_FLAGS_2);
-
 		irq_flags =
 			irqd_get_trigger_type(irq_get_irq_data(client->irq));
 		irq_flags |= IRQF_SHARED | IRQF_ONESHOT;