Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 b98e2e72 编写于 作者: M Marc Zyngier
浏览文件
操作

ARM: KVM: Remove the old world switch 

As we now have a full reimplementation of the world switch, it is
time to kiss the old stuff goodbye. I'm not sure we'll miss it.
Acked-by: NChristoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
上级 b57cd6f6
隐藏空白更改
内联 并排
Showing with 1 addition and 1128 deletion
arch/arm/kvm/interrupts.S
浏览文件 @ b98e2e72
......@@ -17,198 +17,8 @@
*/
#include <linux/linkage.h>
#include <linux/const.h>
#include <asm/unified.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/asm-offsets.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_arm.h>
#include <asm/vfpmacros.h>
#include "interrupts_head.S"
.text
.pushsection .hyp.text, "ax"
/********************************************************************
* Flush per-VMID TLBs
*
* void __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa);
*
* We rely on the hardware to broadcast the TLB invalidation to all CPUs
* inside the inner-shareable domain (which is the case for all v7
* implementations). If we come across a non-IS SMP implementation, we'll
* have to use an IPI based mechanism. Until then, we stick to the simple
* hardware assisted version.
*
* As v7 does not support flushing per IPA, just nuke the whole TLB
* instead, ignoring the ipa value.
*/
ENTRY(__kvm_tlb_flush_vmid_ipa)
push {r2, r3}
dsb ishst
add r0, r0, #KVM_VTTBR
ldrd r2, r3, [r0]
mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR
isb
mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored)
dsb ish
isb
mov r2, #0
mov r3, #0
mcrr p15, 6, r2, r3, c2 @ Back to VMID #0
isb @ Not necessary if followed by eret
pop {r2, r3}
bx lr
ENDPROC(__kvm_tlb_flush_vmid_ipa)
/**
* void __kvm_tlb_flush_vmid(struct kvm *kvm) - Flush per-VMID TLBs
*
* Reuses __kvm_tlb_flush_vmid_ipa() for ARMv7, without passing address
* parameter
*/
ENTRY(__kvm_tlb_flush_vmid)
b __kvm_tlb_flush_vmid_ipa
ENDPROC(__kvm_tlb_flush_vmid)
/********************************************************************
* Flush TLBs and instruction caches of all CPUs inside the inner-shareable
* domain, for all VMIDs
*
* void __kvm_flush_vm_context(void);
*/
ENTRY(__kvm_flush_vm_context)
mov r0, #0 @ rn parameter for c15 flushes is SBZ
/* Invalidate NS Non-Hyp TLB Inner Shareable (TLBIALLNSNHIS) */
mcr p15, 4, r0, c8, c3, 4
/* Invalidate instruction caches Inner Shareable (ICIALLUIS) */
mcr p15, 0, r0, c7, c1, 0
dsb ish
isb @ Not necessary if followed by eret
bx lr
ENDPROC(__kvm_flush_vm_context)
/********************************************************************
* Hypervisor world-switch code
*
*
* int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
*/
ENTRY(__kvm_vcpu_run)
@ Save the vcpu pointer
mcr p15, 4, vcpu, c13, c0, 2 @ HTPIDR
save_host_regs
restore_vgic_state
restore_timer_state
@ Store hardware CP15 state and load guest state
read_cp15_state store_to_vcpu = 0
write_cp15_state read_from_vcpu = 1
@ If the host kernel has not been configured with VFPv3 support,
@ then it is safer if we deny guests from using it as well.
#ifdef CONFIG_VFPv3
@ Set FPEXC_EN so the guest doesn't trap floating point instructions
VFPFMRX r2, FPEXC @ VMRS
push {r2}
orr r2, r2, #FPEXC_EN
VFPFMXR FPEXC, r2 @ VMSR
#endif
@ Configure Hyp-role
configure_hyp_role vmentry
@ Trap coprocessor CRx accesses
set_hstr vmentry
set_hcptr vmentry, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11))
set_hdcr vmentry
@ Write configured ID register into MIDR alias
ldr r1, [vcpu, #VCPU_MIDR]
mcr p15, 4, r1, c0, c0, 0
@ Write guest view of MPIDR into VMPIDR
ldr r1, [vcpu, #CP15_OFFSET(c0_MPIDR)]
mcr p15, 4, r1, c0, c0, 5
@ Set up guest memory translation
ldr r1, [vcpu, #VCPU_KVM]
add r1, r1, #KVM_VTTBR
ldrd r2, r3, [r1]
mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR
@ We're all done, just restore the GPRs and go to the guest
restore_guest_regs
clrex @ Clear exclusive monitor
eret
__kvm_vcpu_return:
/*
* return convention:
* guest r0, r1, r2 saved on the stack
* r0: vcpu pointer
* r1: exception code
*/
save_guest_regs
@ Set VMID == 0
mov r2, #0
mov r3, #0
mcrr p15, 6, r2, r3, c2 @ Write VTTBR
@ Don't trap coprocessor accesses for host kernel
set_hstr vmexit
set_hdcr vmexit
set_hcptr vmexit, (HCPTR_TTA | HCPTR_TCP(10) | HCPTR_TCP(11)), after_vfp_restore
#ifdef CONFIG_VFPv3
@ Switch VFP/NEON hardware state to the host's
add r7, vcpu, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP)
store_vfp_state r7
add r7, vcpu, #VCPU_HOST_CTXT
ldr r7, [r7]
add r7, r7, #CPU_CTXT_VFP
restore_vfp_state r7
after_vfp_restore:
@ Restore FPEXC_EN which we clobbered on entry
pop {r2}
VFPFMXR FPEXC, r2
#else
after_vfp_restore:
#endif
@ Reset Hyp-role
configure_hyp_role vmexit
@ Let host read hardware MIDR
mrc p15, 0, r2, c0, c0, 0
mcr p15, 4, r2, c0, c0, 0
@ Back to hardware MPIDR
mrc p15, 0, r2, c0, c0, 5
mcr p15, 4, r2, c0, c0, 5
@ Store guest CP15 state and restore host state
read_cp15_state store_to_vcpu = 1
write_cp15_state read_from_vcpu = 0
save_timer_state
save_vgic_state
restore_host_regs
clrex @ Clear exclusive monitor
mov r0, r1 @ Return the return code
bx lr @ return to IOCTL
/********************************************************************
* Call function in Hyp mode
......@@ -239,281 +49,4 @@ after_vfp_restore:
ENTRY(kvm_call_hyp)
hvc #0
bx lr
/********************************************************************
* Hypervisor exception vector and handlers
*
*
* The KVM/ARM Hypervisor ABI is defined as follows:
*
* Entry to Hyp mode from the host kernel will happen _only_ when an HVC
* instruction is issued since all traps are disabled when running the host
* kernel as per the Hyp-mode initialization at boot time.
*
* HVC instructions cause a trap to the vector page + offset 0x14 (see hyp_hvc
* below) when the HVC instruction is called from SVC mode (i.e. a guest or the
* host kernel) and they cause a trap to the vector page + offset 0x8 when HVC
* instructions are called from within Hyp-mode.
*
* Hyp-ABI: Calling HYP-mode functions from host (in SVC mode):
* Switching to Hyp mode is done through a simple HVC #0 instruction. The
* exception vector code will check that the HVC comes from VMID==0 and if
* so will push the necessary state (SPSR, lr_usr) on the Hyp stack.
* - r0 contains a pointer to a HYP function
* - r1, r2, and r3 contain arguments to the above function.
* - The HYP function will be called with its arguments in r0, r1 and r2.
* On HYP function return, we return directly to SVC.
*
* Note that the above is used to execute code in Hyp-mode from a host-kernel
* point of view, and is a different concept from performing a world-switch and
* executing guest code SVC mode (with a VMID != 0).
*/
/* Handle undef, svc, pabt, or dabt by crashing with a user notice */
.macro bad_exception exception_code, panic_str
push {r0-r2}
mrrc p15, 6, r0, r1, c2 @ Read VTTBR
lsr r1, r1, #16
ands r1, r1, #0xff
beq 99f
load_vcpu @ Load VCPU pointer
.if \exception_code == ARM_EXCEPTION_DATA_ABORT
mrc p15, 4, r2, c5, c2, 0 @ HSR
mrc p15, 4, r1, c6, c0, 0 @ HDFAR
str r2, [vcpu, #VCPU_HSR]
str r1, [vcpu, #VCPU_HxFAR]
.endif
.if \exception_code == ARM_EXCEPTION_PREF_ABORT
mrc p15, 4, r2, c5, c2, 0 @ HSR
mrc p15, 4, r1, c6, c0, 2 @ HIFAR
str r2, [vcpu, #VCPU_HSR]
str r1, [vcpu, #VCPU_HxFAR]
.endif
mov r1, #\exception_code
b __kvm_vcpu_return
@ We were in the host already. Let's craft a panic-ing return to SVC.
99: mrs r2, cpsr
bic r2, r2, #MODE_MASK
orr r2, r2, #SVC_MODE
THUMB( orr r2, r2, #PSR_T_BIT )
msr spsr_cxsf, r2
mrs r1, ELR_hyp
ldr r2, =panic
msr ELR_hyp, r2
ldr r0, =\panic_str
clrex @ Clear exclusive monitor
eret
.endm
.align 5
__kvm_hyp_vector:
.globl __kvm_hyp_vector
@ Hyp-mode exception vector
W(b) hyp_reset
W(b) hyp_undef
W(b) hyp_svc
W(b) hyp_pabt
W(b) hyp_dabt
W(b) hyp_hvc
W(b) hyp_irq
W(b) hyp_fiq
.align
hyp_reset:
b hyp_reset
.align
hyp_undef:
bad_exception ARM_EXCEPTION_UNDEFINED, und_die_str
.align
hyp_svc:
bad_exception ARM_EXCEPTION_HVC, svc_die_str
.align
hyp_pabt:
bad_exception ARM_EXCEPTION_PREF_ABORT, pabt_die_str
.align
hyp_dabt:
bad_exception ARM_EXCEPTION_DATA_ABORT, dabt_die_str
.align
hyp_hvc:
/*
* Getting here is either becuase of a trap from a guest or from calling
* HVC from the host kernel, which means "switch to Hyp mode".
*/
push {r0, r1, r2}
@ Check syndrome register
mrc p15, 4, r1, c5, c2, 0 @ HSR
lsr r0, r1, #HSR_EC_SHIFT
cmp r0, #HSR_EC_HVC
bne guest_trap @ Not HVC instr.
/*
* Let's check if the HVC came from VMID 0 and allow simple
* switch to Hyp mode
*/
mrrc p15, 6, r0, r2, c2
lsr r2, r2, #16
and r2, r2, #0xff
cmp r2, #0
bne guest_trap @ Guest called HVC
/*
* Getting here means host called HVC, we shift parameters and branch
* to Hyp function.
*/
pop {r0, r1, r2}
/* Check for __hyp_get_vectors */
cmp r0, #-1
mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR
beq 1f
push {lr}
mrs lr, SPSR
push {lr}
mov lr, r0
mov r0, r1
mov r1, r2
mov r2, r3
THUMB( orr lr, #1)
blx lr @ Call the HYP function
pop {lr}
msr SPSR_csxf, lr
pop {lr}
1: eret
guest_trap:
load_vcpu @ Load VCPU pointer to r0
str r1, [vcpu, #VCPU_HSR]
@ Check if we need the fault information
lsr r1, r1, #HSR_EC_SHIFT
#ifdef CONFIG_VFPv3
cmp r1, #HSR_EC_CP_0_13
beq switch_to_guest_vfp
#endif
cmp r1, #HSR_EC_IABT
mrceq p15, 4, r2, c6, c0, 2 @ HIFAR
beq 2f
cmp r1, #HSR_EC_DABT
bne 1f
mrc p15, 4, r2, c6, c0, 0 @ HDFAR
2: str r2, [vcpu, #VCPU_HxFAR]
/*
* B3.13.5 Reporting exceptions taken to the Non-secure PL2 mode:
*
* Abort on the stage 2 translation for a memory access from a
* Non-secure PL1 or PL0 mode:
*
* For any Access flag fault or Translation fault, and also for any
* Permission fault on the stage 2 translation of a memory access
* made as part of a translation table walk for a stage 1 translation,
* the HPFAR holds the IPA that caused the fault. Otherwise, the HPFAR
* is UNKNOWN.
*/
/* Check for permission fault, and S1PTW */
mrc p15, 4, r1, c5, c2, 0 @ HSR
and r0, r1, #HSR_FSC_TYPE
cmp r0, #FSC_PERM
tsteq r1, #(1 << 7) @ S1PTW
mrcne p15, 4, r2, c6, c0, 4 @ HPFAR
bne 3f
/* Preserve PAR */
mrrc p15, 0, r0, r1, c7 @ PAR
push {r0, r1}
/* Resolve IPA using the xFAR */
mcr p15, 0, r2, c7, c8, 0 @ ATS1CPR
isb
mrrc p15, 0, r0, r1, c7 @ PAR
tst r0, #1
bne 4f @ Failed translation
ubfx r2, r0, #12, #20
lsl r2, r2, #4
orr r2, r2, r1, lsl #24
/* Restore PAR */
pop {r0, r1}
mcrr p15, 0, r0, r1, c7 @ PAR
3: load_vcpu @ Load VCPU pointer to r0
str r2, [r0, #VCPU_HPFAR]
1: mov r1, #ARM_EXCEPTION_HVC
b __kvm_vcpu_return
4: pop {r0, r1} @ Failed translation, return to guest
mcrr p15, 0, r0, r1, c7 @ PAR
clrex
pop {r0, r1, r2}
eret
/*
* If VFPv3 support is not available, then we will not switch the VFP
* registers; however cp10 and cp11 accesses will still trap and fallback
* to the regular coprocessor emulation code, which currently will
* inject an undefined exception to the guest.
*/
#ifdef CONFIG_VFPv3
switch_to_guest_vfp:
push {r3-r7}
@ NEON/VFP used. Turn on VFP access.
set_hcptr vmtrap, (HCPTR_TCP(10) | HCPTR_TCP(11))
@ Switch VFP/NEON hardware state to the guest's
add r7, r0, #VCPU_HOST_CTXT
ldr r7, [r7]
add r7, r7, #CPU_CTXT_VFP
store_vfp_state r7
add r7, r0, #(VCPU_GUEST_CTXT + CPU_CTXT_VFP)
restore_vfp_state r7
pop {r3-r7}
pop {r0-r2}
clrex
eret
#endif
.align
hyp_irq:
push {r0, r1, r2}
mov r1, #ARM_EXCEPTION_IRQ
load_vcpu @ Load VCPU pointer to r0
b __kvm_vcpu_return
.align
hyp_fiq:
b hyp_fiq
.ltorg
.popsection
.pushsection ".rodata"
und_die_str:
.ascii "unexpected undefined exception in Hyp mode at: %#08x\n"
pabt_die_str:
.ascii "unexpected prefetch abort in Hyp mode at: %#08x\n"
dabt_die_str:
.ascii "unexpected data abort in Hyp mode at: %#08x\n"
svc_die_str:
.ascii "unexpected HVC/SVC trap in Hyp mode at: %#08x\n"
.popsection
ENDPROC(kvm_call_hyp)
arch/arm/kvm/interrupts_head.S 已删除 100644 → 0
浏览文件 @ b57cd6f6
#include <linux/irqchip/arm-gic.h>
#include <asm/assembler.h>
/* Compat macro, until we get rid of this file entierely */
#define VCPU_GP_REGS (VCPU_GUEST_CTXT + CPU_CTXT_GP_REGS)
#define VCPU_USR_REGS (VCPU_GP_REGS + GP_REGS_USR)
#define VCPU_SVC_REGS (VCPU_GP_REGS + GP_REGS_SVC)
#define VCPU_ABT_REGS (VCPU_GP_REGS + GP_REGS_ABT)
#define VCPU_UND_REGS (VCPU_GP_REGS + GP_REGS_UND)
#define VCPU_IRQ_REGS (VCPU_GP_REGS + GP_REGS_IRQ)
#define VCPU_FIQ_REGS (VCPU_GP_REGS + GP_REGS_FIQ)
#define VCPU_PC (VCPU_GP_REGS + GP_REGS_PC)
#define VCPU_CPSR (VCPU_GP_REGS + GP_REGS_CPSR)
#define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4))
#define VCPU_USR_SP (VCPU_USR_REG(13))
#define VCPU_USR_LR (VCPU_USR_REG(14))
#define VCPU_CP15_BASE (VCPU_GUEST_CTXT + CPU_CTXT_CP15)
#define CP15_OFFSET(_cp15_reg_idx) (VCPU_CP15_BASE + (_cp15_reg_idx * 4))
/*
* Many of these macros need to access the VCPU structure, which is always
* held in r0. These macros should never clobber r1, as it is used to hold the
* exception code on the return path (except of course the macro that switches
* all the registers before the final jump to the VM).
*/
vcpu .req r0 @ vcpu pointer always in r0
/* Clobbers {r2-r6} */
.macro store_vfp_state vfp_base
@ The VFPFMRX and VFPFMXR macros are the VMRS and VMSR instructions
VFPFMRX r2, FPEXC
@ Make sure VFP is enabled so we can touch the registers.
orr r6, r2, #FPEXC_EN
VFPFMXR FPEXC, r6
VFPFMRX r3, FPSCR
tst r2, #FPEXC_EX @ Check for VFP Subarchitecture
beq 1f
@ If FPEXC_EX is 0, then FPINST/FPINST2 reads are upredictable, so
@ we only need to save them if FPEXC_EX is set.
VFPFMRX r4, FPINST
tst r2, #FPEXC_FP2V
VFPFMRX r5, FPINST2, ne @ vmrsne
bic r6, r2, #FPEXC_EX @ FPEXC_EX disable
VFPFMXR FPEXC, r6
1:
VFPFSTMIA \vfp_base, r6 @ Save VFP registers
stm \vfp_base, {r2-r5} @ Save FPEXC, FPSCR, FPINST, FPINST2
.endm
/* Assume FPEXC_EN is on and FPEXC_EX is off, clobbers {r2-r6} */
.macro restore_vfp_state vfp_base
VFPFLDMIA \vfp_base, r6 @ Load VFP registers
ldm \vfp_base, {r2-r5} @ Load FPEXC, FPSCR, FPINST, FPINST2
VFPFMXR FPSCR, r3
tst r2, #FPEXC_EX @ Check for VFP Subarchitecture
beq 1f
VFPFMXR FPINST, r4
tst r2, #FPEXC_FP2V
VFPFMXR FPINST2, r5, ne
1:
VFPFMXR FPEXC, r2 @ FPEXC (last, in case !EN)
.endm
/* These are simply for the macros to work - value don't have meaning */
.equ usr, 0
.equ svc, 1
.equ abt, 2
.equ und, 3
.equ irq, 4
.equ fiq, 5
.macro push_host_regs_mode mode
mrs r2, SP_\mode
mrs r3, LR_\mode
mrs r4, SPSR_\mode
push {r2, r3, r4}
.endm
/*
* Store all host persistent registers on the stack.
* Clobbers all registers, in all modes, except r0 and r1.
*/
.macro save_host_regs
/* Hyp regs. Only ELR_hyp (SPSR_hyp already saved) */
mrs r2, ELR_hyp
push {r2}
/* usr regs */
push {r4-r12} @ r0-r3 are always clobbered
mrs r2, SP_usr
mov r3, lr
push {r2, r3}
push_host_regs_mode svc
push_host_regs_mode abt
push_host_regs_mode und
push_host_regs_mode irq
/* fiq regs */
mrs r2, r8_fiq
mrs r3, r9_fiq
mrs r4, r10_fiq
mrs r5, r11_fiq
mrs r6, r12_fiq
mrs r7, SP_fiq
mrs r8, LR_fiq
mrs r9, SPSR_fiq
push {r2-r9}
.endm
.macro pop_host_regs_mode mode
pop {r2, r3, r4}
msr SP_\mode, r2
msr LR_\mode, r3
msr SPSR_\mode, r4
.endm
/*
* Restore all host registers from the stack.
* Clobbers all registers, in all modes, except r0 and r1.
*/
.macro restore_host_regs
pop {r2-r9}
msr r8_fiq, r2
msr r9_fiq, r3
msr r10_fiq, r4
msr r11_fiq, r5
msr r12_fiq, r6
msr SP_fiq, r7
msr LR_fiq, r8
msr SPSR_fiq, r9
pop_host_regs_mode irq
pop_host_regs_mode und
pop_host_regs_mode abt
pop_host_regs_mode svc
pop {r2, r3}
msr SP_usr, r2
mov lr, r3
pop {r4-r12}
pop {r2}
msr ELR_hyp, r2
.endm
/*
* Restore SP, LR and SPSR for a given mode. offset is the offset of
* this mode's registers from the VCPU base.
*
* Assumes vcpu pointer in vcpu reg
*
* Clobbers r1, r2, r3, r4.
*/
.macro restore_guest_regs_mode mode, offset
add r1, vcpu, \offset
ldm r1, {r2, r3, r4}
msr SP_\mode, r2
msr LR_\mode, r3
msr SPSR_\mode, r4
.endm
/*
* Restore all guest registers from the vcpu struct.
*
* Assumes vcpu pointer in vcpu reg
*
* Clobbers *all* registers.
*/
.macro restore_guest_regs
restore_guest_regs_mode svc, #VCPU_SVC_REGS
restore_guest_regs_mode abt, #VCPU_ABT_REGS
restore_guest_regs_mode und, #VCPU_UND_REGS
restore_guest_regs_mode irq, #VCPU_IRQ_REGS
add r1, vcpu, #VCPU_FIQ_REGS
ldm r1, {r2-r9}
msr r8_fiq, r2
msr r9_fiq, r3
msr r10_fiq, r4
msr r11_fiq, r5
msr r12_fiq, r6
msr SP_fiq, r7
msr LR_fiq, r8
msr SPSR_fiq, r9
@ Load return state
ldr r2, [vcpu, #VCPU_PC]
ldr r3, [vcpu, #VCPU_CPSR]
msr ELR_hyp, r2
msr SPSR_cxsf, r3
@ Load user registers
ldr r2, [vcpu, #VCPU_USR_SP]
ldr r3, [vcpu, #VCPU_USR_LR]
msr SP_usr, r2
mov lr, r3
add vcpu, vcpu, #(VCPU_USR_REGS)
ldm vcpu, {r0-r12}
.endm
/*
* Save SP, LR and SPSR for a given mode. offset is the offset of
* this mode's registers from the VCPU base.
*
* Assumes vcpu pointer in vcpu reg
*
* Clobbers r2, r3, r4, r5.
*/
.macro save_guest_regs_mode mode, offset
add r2, vcpu, \offset
mrs r3, SP_\mode
mrs r4, LR_\mode
mrs r5, SPSR_\mode
stm r2, {r3, r4, r5}
.endm
/*
* Save all guest registers to the vcpu struct
* Expects guest's r0, r1, r2 on the stack.
*
* Assumes vcpu pointer in vcpu reg
*
* Clobbers r2, r3, r4, r5.
*/
.macro save_guest_regs
@ Store usr registers
add r2, vcpu, #VCPU_USR_REG(3)
stm r2, {r3-r12}
add r2, vcpu, #VCPU_USR_REG(0)
pop {r3, r4, r5} @ r0, r1, r2
stm r2, {r3, r4, r5}
mrs r2, SP_usr
mov r3, lr
str r2, [vcpu, #VCPU_USR_SP]
str r3, [vcpu, #VCPU_USR_LR]
@ Store return state
mrs r2, ELR_hyp
mrs r3, spsr
str r2, [vcpu, #VCPU_PC]
str r3, [vcpu, #VCPU_CPSR]
@ Store other guest registers
save_guest_regs_mode svc, #VCPU_SVC_REGS
save_guest_regs_mode abt, #VCPU_ABT_REGS
save_guest_regs_mode und, #VCPU_UND_REGS
save_guest_regs_mode irq, #VCPU_IRQ_REGS
.endm
/* Reads cp15 registers from hardware and stores them in memory
* @store_to_vcpu: If 0, registers are written in-order to the stack,
* otherwise to the VCPU struct pointed to by vcpup
*
* Assumes vcpu pointer in vcpu reg
*
* Clobbers r2 - r12
*/
.macro read_cp15_state store_to_vcpu
mrc p15, 0, r2, c1, c0, 0 @ SCTLR
mrc p15, 0, r3, c1, c0, 2 @ CPACR
mrc p15, 0, r4, c2, c0, 2 @ TTBCR
mrc p15, 0, r5, c3, c0, 0 @ DACR
mrrc p15, 0, r6, r7, c2 @ TTBR 0
mrrc p15, 1, r8, r9, c2 @ TTBR 1
mrc p15, 0, r10, c10, c2, 0 @ PRRR
mrc p15, 0, r11, c10, c2, 1 @ NMRR
mrc p15, 2, r12, c0, c0, 0 @ CSSELR
.if \store_to_vcpu == 0
push {r2-r12} @ Push CP15 registers
.else
str r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
str r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
str r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
str r5, [vcpu, #CP15_OFFSET(c3_DACR)]
add r2, vcpu, #CP15_OFFSET(c2_TTBR0)
strd r6, r7, [r2]
add r2, vcpu, #CP15_OFFSET(c2_TTBR1)
strd r8, r9, [r2]
str r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
str r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
str r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
.endif
mrc p15, 0, r2, c13, c0, 1 @ CID
mrc p15, 0, r3, c13, c0, 2 @ TID_URW
mrc p15, 0, r4, c13, c0, 3 @ TID_URO
mrc p15, 0, r5, c13, c0, 4 @ TID_PRIV
mrc p15, 0, r6, c5, c0, 0 @ DFSR
mrc p15, 0, r7, c5, c0, 1 @ IFSR
mrc p15, 0, r8, c5, c1, 0 @ ADFSR
mrc p15, 0, r9, c5, c1, 1 @ AIFSR
mrc p15, 0, r10, c6, c0, 0 @ DFAR
mrc p15, 0, r11, c6, c0, 2 @ IFAR
mrc p15, 0, r12, c12, c0, 0 @ VBAR
.if \store_to_vcpu == 0
push {r2-r12} @ Push CP15 registers
.else
str r2, [vcpu, #CP15_OFFSET(c13_CID)]
str r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
str r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
str r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
str r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
str r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
str r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
str r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
str r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
str r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
str r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
.endif
mrc p15, 0, r2, c14, c1, 0 @ CNTKCTL
mrrc p15, 0, r4, r5, c7 @ PAR
mrc p15, 0, r6, c10, c3, 0 @ AMAIR0
mrc p15, 0, r7, c10, c3, 1 @ AMAIR1
.if \store_to_vcpu == 0
push {r2,r4-r7}
.else
str r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
add r12, vcpu, #CP15_OFFSET(c7_PAR)
strd r4, r5, [r12]
str r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
str r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
.endif
.endm
/*
* Reads cp15 registers from memory and writes them to hardware
* @read_from_vcpu: If 0, registers are read in-order from the stack,
* otherwise from the VCPU struct pointed to by vcpup
*
* Assumes vcpu pointer in vcpu reg
*/
.macro write_cp15_state read_from_vcpu
.if \read_from_vcpu == 0
pop {r2,r4-r7}
.else
ldr r2, [vcpu, #CP15_OFFSET(c14_CNTKCTL)]
add r12, vcpu, #CP15_OFFSET(c7_PAR)
ldrd r4, r5, [r12]
ldr r6, [vcpu, #CP15_OFFSET(c10_AMAIR0)]
ldr r7, [vcpu, #CP15_OFFSET(c10_AMAIR1)]
.endif
mcr p15, 0, r2, c14, c1, 0 @ CNTKCTL
mcrr p15, 0, r4, r5, c7 @ PAR
mcr p15, 0, r6, c10, c3, 0 @ AMAIR0
mcr p15, 0, r7, c10, c3, 1 @ AMAIR1
.if \read_from_vcpu == 0
pop {r2-r12}
.else
ldr r2, [vcpu, #CP15_OFFSET(c13_CID)]
ldr r3, [vcpu, #CP15_OFFSET(c13_TID_URW)]
ldr r4, [vcpu, #CP15_OFFSET(c13_TID_URO)]
ldr r5, [vcpu, #CP15_OFFSET(c13_TID_PRIV)]
ldr r6, [vcpu, #CP15_OFFSET(c5_DFSR)]
ldr r7, [vcpu, #CP15_OFFSET(c5_IFSR)]
ldr r8, [vcpu, #CP15_OFFSET(c5_ADFSR)]
ldr r9, [vcpu, #CP15_OFFSET(c5_AIFSR)]
ldr r10, [vcpu, #CP15_OFFSET(c6_DFAR)]
ldr r11, [vcpu, #CP15_OFFSET(c6_IFAR)]
ldr r12, [vcpu, #CP15_OFFSET(c12_VBAR)]
.endif
mcr p15, 0, r2, c13, c0, 1 @ CID
mcr p15, 0, r3, c13, c0, 2 @ TID_URW
mcr p15, 0, r4, c13, c0, 3 @ TID_URO
mcr p15, 0, r5, c13, c0, 4 @ TID_PRIV
mcr p15, 0, r6, c5, c0, 0 @ DFSR
mcr p15, 0, r7, c5, c0, 1 @ IFSR
mcr p15, 0, r8, c5, c1, 0 @ ADFSR
mcr p15, 0, r9, c5, c1, 1 @ AIFSR
mcr p15, 0, r10, c6, c0, 0 @ DFAR
mcr p15, 0, r11, c6, c0, 2 @ IFAR
mcr p15, 0, r12, c12, c0, 0 @ VBAR
.if \read_from_vcpu == 0
pop {r2-r12}
.else
ldr r2, [vcpu, #CP15_OFFSET(c1_SCTLR)]
ldr r3, [vcpu, #CP15_OFFSET(c1_CPACR)]
ldr r4, [vcpu, #CP15_OFFSET(c2_TTBCR)]
ldr r5, [vcpu, #CP15_OFFSET(c3_DACR)]
add r12, vcpu, #CP15_OFFSET(c2_TTBR0)
ldrd r6, r7, [r12]
add r12, vcpu, #CP15_OFFSET(c2_TTBR1)
ldrd r8, r9, [r12]
ldr r10, [vcpu, #CP15_OFFSET(c10_PRRR)]
ldr r11, [vcpu, #CP15_OFFSET(c10_NMRR)]
ldr r12, [vcpu, #CP15_OFFSET(c0_CSSELR)]
.endif
mcr p15, 0, r2, c1, c0, 0 @ SCTLR
mcr p15, 0, r3, c1, c0, 2 @ CPACR
mcr p15, 0, r4, c2, c0, 2 @ TTBCR
mcr p15, 0, r5, c3, c0, 0 @ DACR
mcrr p15, 0, r6, r7, c2 @ TTBR 0
mcrr p15, 1, r8, r9, c2 @ TTBR 1
mcr p15, 0, r10, c10, c2, 0 @ PRRR
mcr p15, 0, r11, c10, c2, 1 @ NMRR
mcr p15, 2, r12, c0, c0, 0 @ CSSELR
.endm
/*
* Save the VGIC CPU state into memory
*
* Assumes vcpu pointer in vcpu reg
*/
.macro save_vgic_state
/* Get VGIC VCTRL base into r2 */
ldr r2, [vcpu, #VCPU_KVM]
ldr r2, [r2, #KVM_VGIC_VCTRL]
cmp r2, #0
beq 2f
/* Compute the address of struct vgic_cpu */
add r11, vcpu, #VCPU_VGIC_CPU
/* Save all interesting registers */
ldr r4, [r2, #GICH_VMCR]
ldr r5, [r2, #GICH_MISR]
ldr r6, [r2, #GICH_EISR0]
ldr r7, [r2, #GICH_EISR1]
ldr r8, [r2, #GICH_ELRSR0]
ldr r9, [r2, #GICH_ELRSR1]
ldr r10, [r2, #GICH_APR]
ARM_BE8(rev r4, r4 )
ARM_BE8(rev r5, r5 )
ARM_BE8(rev r6, r6 )
ARM_BE8(rev r7, r7 )
ARM_BE8(rev r8, r8 )
ARM_BE8(rev r9, r9 )
ARM_BE8(rev r10, r10 )
str r4, [r11, #VGIC_V2_CPU_VMCR]
str r5, [r11, #VGIC_V2_CPU_MISR]
#ifdef CONFIG_CPU_ENDIAN_BE8
str r6, [r11, #(VGIC_V2_CPU_EISR + 4)]
str r7, [r11, #VGIC_V2_CPU_EISR]
str r8, [r11, #(VGIC_V2_CPU_ELRSR + 4)]
str r9, [r11, #VGIC_V2_CPU_ELRSR]
#else
str r6, [r11, #VGIC_V2_CPU_EISR]
str r7, [r11, #(VGIC_V2_CPU_EISR + 4)]
str r8, [r11, #VGIC_V2_CPU_ELRSR]
str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)]
#endif
str r10, [r11, #VGIC_V2_CPU_APR]
/* Clear GICH_HCR */
mov r5, #0
str r5, [r2, #GICH_HCR]
/* Save list registers */
add r2, r2, #GICH_LR0
add r3, r11, #VGIC_V2_CPU_LR
ldr r4, [r11, #VGIC_CPU_NR_LR]
1: ldr r6, [r2], #4
ARM_BE8(rev r6, r6 )
str r6, [r3], #4
subs r4, r4, #1
bne 1b
2:
.endm
/*
* Restore the VGIC CPU state from memory
*
* Assumes vcpu pointer in vcpu reg
*/
.macro restore_vgic_state
/* Get VGIC VCTRL base into r2 */
ldr r2, [vcpu, #VCPU_KVM]
ldr r2, [r2, #KVM_VGIC_VCTRL]
cmp r2, #0
beq 2f
/* Compute the address of struct vgic_cpu */
add r11, vcpu, #VCPU_VGIC_CPU
/* We only restore a minimal set of registers */
ldr r3, [r11, #VGIC_V2_CPU_HCR]
ldr r4, [r11, #VGIC_V2_CPU_VMCR]
ldr r8, [r11, #VGIC_V2_CPU_APR]
ARM_BE8(rev r3, r3 )
ARM_BE8(rev r4, r4 )
ARM_BE8(rev r8, r8 )
str r3, [r2, #GICH_HCR]
str r4, [r2, #GICH_VMCR]
str r8, [r2, #GICH_APR]
/* Restore list registers */
add r2, r2, #GICH_LR0
add r3, r11, #VGIC_V2_CPU_LR
ldr r4, [r11, #VGIC_CPU_NR_LR]
1: ldr r6, [r3], #4
ARM_BE8(rev r6, r6 )
str r6, [r2], #4
subs r4, r4, #1
bne 1b
2:
.endm
#define CNTHCTL_PL1PCTEN (1 << 0)
#define CNTHCTL_PL1PCEN (1 << 1)
/*
* Save the timer state onto the VCPU and allow physical timer/counter access
* for the host.
*
* Assumes vcpu pointer in vcpu reg
* Clobbers r2-r5
*/
.macro save_timer_state
ldr r4, [vcpu, #VCPU_KVM]
ldr r2, [r4, #KVM_TIMER_ENABLED]
cmp r2, #0
beq 1f
mrc p15, 0, r2, c14, c3, 1 @ CNTV_CTL
str r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
isb
mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL
ldr r4, =VCPU_TIMER_CNTV_CVAL
add r5, vcpu, r4
strd r2, r3, [r5]
@ Ensure host CNTVCT == CNTPCT
mov r2, #0
mcrr p15, 4, r2, r2, c14 @ CNTVOFF
1:
mov r2, #0 @ Clear ENABLE
mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL
@ Allow physical timer/counter access for the host
mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL
orr r2, r2, #(CNTHCTL_PL1PCEN | CNTHCTL_PL1PCTEN)
mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL
.endm
/*
* Load the timer state from the VCPU and deny physical timer/counter access
* for the host.
*
* Assumes vcpu pointer in vcpu reg
* Clobbers r2-r5
*/
.macro restore_timer_state
@ Disallow physical timer access for the guest
@ Physical counter access is allowed
mrc p15, 4, r2, c14, c1, 0 @ CNTHCTL
orr r2, r2, #CNTHCTL_PL1PCTEN
bic r2, r2, #CNTHCTL_PL1PCEN
mcr p15, 4, r2, c14, c1, 0 @ CNTHCTL
ldr r4, [vcpu, #VCPU_KVM]
ldr r2, [r4, #KVM_TIMER_ENABLED]
cmp r2, #0
beq 1f
ldr r2, [r4, #KVM_TIMER_CNTVOFF]
ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)]
mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF
ldr r4, =VCPU_TIMER_CNTV_CVAL
add r5, vcpu, r4
ldrd r2, r3, [r5]
mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL
isb
ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL]
and r2, r2, #3
mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL
1:
.endm
.equ vmentry, 0
.equ vmexit, 1
/* Configures the HSTR (Hyp System Trap Register) on entry/return
* (hardware reset value is 0) */
.macro set_hstr operation
mrc p15, 4, r2, c1, c1, 3
ldr r3, =HSTR_T(15)
.if \operation == vmentry
orr r2, r2, r3 @ Trap CR{15}
.else
bic r2, r2, r3 @ Don't trap any CRx accesses
.endif
mcr p15, 4, r2, c1, c1, 3
.endm
/* Configures the HCPTR (Hyp Coprocessor Trap Register) on entry/return
* (hardware reset value is 0). Keep previous value in r2.
* An ISB is emited on vmexit/vmtrap, but executed on vmexit only if
* VFP wasn't already enabled (always executed on vmtrap).
* If a label is specified with vmexit, it is branched to if VFP wasn't
* enabled.
*/
.macro set_hcptr operation, mask, label = none
mrc p15, 4, r2, c1, c1, 2
ldr r3, =\mask
.if \operation == vmentry
orr r3, r2, r3 @ Trap coproc-accesses defined in mask
.else
bic r3, r2, r3 @ Don't trap defined coproc-accesses
.endif
mcr p15, 4, r3, c1, c1, 2
.if \operation != vmentry
.if \operation == vmexit
tst r2, #(HCPTR_TCP(10) | HCPTR_TCP(11))
beq 1f
.endif
isb
.if \label != none
b \label
.endif
1:
.endif
.endm
/* Configures the HDCR (Hyp Debug Configuration Register) on entry/return
* (hardware reset value is 0) */
.macro set_hdcr operation
mrc p15, 4, r2, c1, c1, 1
ldr r3, =(HDCR_TPM|HDCR_TPMCR)
.if \operation == vmentry
orr r2, r2, r3 @ Trap some perfmon accesses
.else
bic r2, r2, r3 @ Don't trap any perfmon accesses
.endif
mcr p15, 4, r2, c1, c1, 1
.endm
/* Enable/Disable: stage-2 trans., trap interrupts, trap wfi, trap smc */
.macro configure_hyp_role operation
.if \operation == vmentry
ldr r2, [vcpu, #VCPU_HCR]
ldr r3, [vcpu, #VCPU_IRQ_LINES]
orr r2, r2, r3
.else
mov r2, #0
.endif
mcr p15, 4, r2, c1, c1, 0 @ HCR
.endm
.macro load_vcpu
mrc p15, 4, vcpu, c13, c0, 2 @ HTPIDR
.endm
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或