Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 b93a4afc 编写于 作者: R Russell King
浏览文件
操作

Merge branch 'for-rmk' of git://git.pengutronix.de/git/imx/linux-2.6 into devel-stable 

Conflicts:
	arch/arm/Makefile
上级 62c132a8 9b1489e9
展开全部 隐藏空白更改
内联 并排
Showing with 7603 addition and 3235 deletion
MAINTAINERS
浏览文件 @ b93a4afc
......@@ -662,6 +662,12 @@ T: git://git.pengutronix.de/git/imx/linux-2.6.git
F: arch/arm/mach-mx*/
F: arch/arm/plat-mxc/
ARM/FREESCALE IMX51
M: Amit Kucheria <amit.kucheria@canonical.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-mx5/
ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......
arch/arm/Kconfig
浏览文件 @ b93a4afc
......@@ -310,10 +310,9 @@ config ARCH_MXC
bool "Freescale MXC/iMX-based"
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select COMMON_CLKDEV
help
Support for Freescale MXC/iMX-based family of processors
......
arch/arm/Makefile
浏览文件 @ b93a4afc
......@@ -146,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1) := mx1
machine-$(CONFIG_ARCH_MX2) := mx2
machine-$(CONFIG_ARCH_MX25) := mx25
machine-$(CONFIG_ARCH_MX3) := mx3
machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXC91231) := mxc91231
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
......
arch/arm/configs/mx1ads_defconfig 已删除 100644 → 0
浏览文件 @ 62c132a8
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.12-rc1-bk2
# Sun Mar 27 02:15:46 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_IOMAP=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_SYSCTL is not set
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
#
# System Type
#
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_OMAP is not set
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_IMX=y
# CONFIG_ARCH_H720X is not set
#
# IMX Implementations
#
CONFIG_ARCH_MX1ADS=y
#
# Processor Type
#
CONFIG_CPU_ARM920T=y
CONFIG_CPU_32v4=y
CONFIG_CPU_ABRT_EV4T=y
CONFIG_CPU_CACHE_V4WT=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
#
# Processor Features
#
# CONFIG_ARM_THUMB is not set
# CONFIG_CPU_ICACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
#
# Bus support
#
CONFIG_ISA=y
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# Kernel Features
#
CONFIG_PREEMPT=y
# CONFIG_LEDS is not set
CONFIG_ALIGNMENT_TRAP=y
#
# Boot options
#
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
CONFIG_CMDLINE="console=ttySMX0,57600n8 ip=bootp root=/dev/nfs"
# CONFIG_XIP_KERNEL is not set
#
# Floating point emulation
#
#
# At least one emulation must be selected
#
CONFIG_FPE_NWFPE=y
CONFIG_FPE_NWFPE_XP=y
CONFIG_FPE_FASTFPE=y
#
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
# CONFIG_ARTHUR is not set
#
# Power management options
#
# CONFIG_PM is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_DEBUG_DRIVER is not set
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
# CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set
# CONFIG_MTD_AFS_PARTS is not set
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set
# CONFIG_NFTL is not set
# CONFIG_INFTL is not set
#
# RAM/ROM/Flash chip drivers
#
# CONFIG_MTD_CFI is not set
# CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_RAM is not set
CONFIG_MTD_ROM=y
# CONFIG_MTD_ABSENT is not set
#
# Mapping drivers for chip access
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
#
# Self-contained MTD device drivers
#
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
#
# Disk-On-Chip Device Drivers
#
# CONFIG_MTD_DOC2000 is not set
# CONFIG_MTD_DOC2001 is not set
# CONFIG_MTD_DOC2001PLUS is not set
#
# NAND Flash Device Drivers
#
# CONFIG_MTD_NAND is not set
#
# Parallel port support
#
# CONFIG_PARPORT is not set
#
# Plug and Play support
#
# CONFIG_PNP is not set
#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_RAM is not set
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
#
# SCSI device support
#
# CONFIG_SCSI is not set
#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set
#
# Fusion MPT device support
#
#
# IEEE 1394 (FireWire) support
#
#
# I2O device support
#
#
# Networking support
#
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# CONFIG_IPV6 is not set
# CONFIG_NETFILTER is not set
#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
#
# ARCnet devices
#
# CONFIG_ARCNET is not set
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_SMC91X is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_NET_PCI is not set
# CONFIG_NET_POCKET is not set
#
# Ethernet (1000 Mbit)
#
#
# Ethernet (10000 Mbit)
#
#
# Token Ring devices
#
# CONFIG_TR is not set
#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set
#
# Wan interfaces
#
# CONFIG_WAN is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=y
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=y
CONFIG_PPP_BSDCOMP=y
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
#
# ISDN subsystem
#
# CONFIG_ISDN is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
# CONFIG_VT is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
#
# Ftape, the floppy tape device driver
#
# CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
#
# I2C support
#
# CONFIG_I2C is not set
#
# Misc devices
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
#
# Graphics support
#
# CONFIG_FB is not set
#
# Sound
#
# CONFIG_SOUND is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
# CONFIG_USB_ARCH_HAS_OHCI is not set
# CONFIG_USB is not set
#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# File systems
#
# CONFIG_EXT2_FS is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_SYSFS=y
CONFIG_DEVFS_FS=y
CONFIG_DEVFS_MOUNT=y
# CONFIG_DEVFS_DEBUG is not set
# CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_JFFS_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_FS_NOR_ECC is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
#
# Profiling support
#
# CONFIG_PROFILING is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_LL is not set
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
#
# Cryptographic options
#
CONFIG_CRYPTO=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set
#
# Hardware crypto devices
#
#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
arch/arm/configs/mx27_defconfig
浏览文件 @ b93a4afc
......@@ -200,7 +200,7 @@ CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_PCM970_BASEBOARD=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_MX27LITE=y
CONFIG_MACH_IMX27LITE=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
......
arch/arm/configs/mx51_defconfig 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx1/Makefile
浏览文件 @ b93a4afc
......@@ -4,11 +4,12 @@
# Object file lists.
EXTRA_CFLAGS += -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-y += generic.o clock.o devices.o
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += ksym_mx1.o mx1_camera_fiq.o
# Specific board support
obj-$(CONFIG_ARCH_MX1ADS) += mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += scb9328.o
\ No newline at end of file
obj-$(CONFIG_ARCH_MX1ADS) += mach-mx1ads.o
obj-$(CONFIG_MACH_SCB9328) += mach-scb9328.o
arch/arm/mach-mx1/mx1ads.c → arch/arm/mach-mx1/mach-mx1ads.c
浏览文件 @ b93a4afc
/*
* arch/arm/mach-imx/mx1ads.c
* arch/arm/mach-imx/mach-mx1ads.c
*
* Initially based on:
* linux-2.6.7-imx/arch/arm/mach-imx/scb9328.c
......@@ -27,7 +27,7 @@
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/iomux-mx1.h>
#include <mach/irqs.h>
#include "devices.h"
......@@ -147,7 +147,7 @@ MACHINE_START(MX1ADS, "Freescale MX1ADS")
/* Maintainer: Sascha Hauer, Pengutronix */
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
.timer = &mx1ads_timer,
......@@ -157,7 +157,7 @@ MACHINE_END
MACHINE_START(MXLADS, "Freescale MXLADS")
.phys_io = IMX_IO_PHYS,
.io_pg_offst = (IMX_IO_BASE >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = MX1_PHYS_OFFSET + 0x100,
.map_io = mx1_map_io,
.init_irq = mx1_init_irq,
.timer = &mx1ads_timer,
......
arch/arm/mach-mx1/scb9328.c → arch/arm/mach-mx1/mach-scb9328.c
浏览文件 @ b93a4afc
/*
* linux/arch/arm/mach-mx1/scb9328.c
* linux/arch/arm/mach-mx1/mach-scb9328.c
*
* Copyright (c) 2004 Sascha Hauer <saschahauer@web.de>
* Copyright (c) 2006-2008 Juergen Beisert <jbeisert@netscape.net>
......@@ -23,7 +23,7 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/iomux-mx1.h>
#include "devices.h"
......
arch/arm/mach-mx2/Kconfig
浏览文件 @ b93a4afc
......@@ -37,6 +37,7 @@ config MACH_MX27ADS
config MACH_PCM038
bool "Phytec phyCORE-i.MX27 CPU module (pcm038)"
depends on MACH_MX27
select MXC_ULPI if USB_ULPI
help
Include support for phyCORE-i.MX27 (aka pcm038) platform. This
includes specific configurations for the module and its peripherals.
......@@ -55,7 +56,7 @@ config MACH_PCM970_BASEBOARD
endchoice
config MACH_EUKREA_CPUIMX27
config MACH_CPUIMX27
bool "Eukrea CPUIMX27 module"
depends on MACH_MX27
help
......@@ -64,14 +65,14 @@ config MACH_EUKREA_CPUIMX27
config MACH_EUKREA_CPUIMX27_USESDHC2
bool "CPUIMX27 integrates SDHC2 module"
depends on MACH_EUKREA_CPUIMX27
depends on MACH_CPUIMX27
help
This adds support for the internal SDHC2 used on CPUIMX27 used
for wifi or eMMC.
choice
prompt "Baseboard"
depends on MACH_EUKREA_CPUIMX27
depends on MACH_CPUIMX27
default MACH_EUKREA_MBIMX27_BASEBOARD
config MACH_EUKREA_MBIMX27_BASEBOARD
......@@ -90,7 +91,7 @@ config MACH_MX27_3DS
Include support for MX27PDK platform. This includes specific
configurations for the board and its peripherals.
config MACH_MX27LITE
config MACH_IMX27LITE
bool "LogicPD MX27 LITEKIT platform"
depends on MACH_MX27
help
......@@ -100,6 +101,7 @@ config MACH_MX27LITE
config MACH_PCA100
bool "Phytec phyCARD-s (pca100)"
depends on MACH_MX27
select MXC_ULPI if USB_ULPI
help
Include support for phyCARD-s (aka pca100) platform. This
includes specific configurations for the module and its peripherals.
......
arch/arm/mach-mx2/Makefile
浏览文件 @ b93a4afc
......@@ -4,21 +4,20 @@
# Object file lists.
obj-y := generic.o devices.o serial.o
obj-y := devices.o serial.o
obj-$(CONFIG_MACH_MX21) += clock_imx21.o
obj-$(CONFIG_MACH_MX21) += clock_imx21.o mm-imx21.o
obj-$(CONFIG_MACH_MX27) += cpu_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o
obj-$(CONFIG_MACH_MX27) += clock_imx27.o mm-imx27.o
obj-$(CONFIG_MACH_MX21ADS) += mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mx27ads.o
obj-$(CONFIG_MACH_PCM038) += pcm038.o
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
obj-$(CONFIG_MACH_MX27ADS) += mach-mx27ads.o
obj-$(CONFIG_MACH_PCM038) += mach-pcm038.o
obj-$(CONFIG_MACH_PCM970_BASEBOARD) += pcm970-baseboard.o
obj-$(CONFIG_MACH_MX27_3DS) += mx27pdk.o
obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
obj-$(CONFIG_MACH_MX27_3DS) += mach-mx27_3ds.o
obj-$(CONFIG_MACH_IMX27LITE) += mach-imx27lite.o
obj-$(CONFIG_MACH_CPUIMX27) += mach-cpuimx27.o
obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
obj-$(CONFIG_MACH_PCA100) += pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
obj-$(CONFIG_MACH_PCA100) += mach-pca100.o
obj-$(CONFIG_MACH_MXT_TD60) += mach-mxt_td60.o
arch/arm/mach-mx2/clock_imx21.c
浏览文件 @ b93a4afc
......@@ -23,11 +23,242 @@
#include <linux/module.h>
#include <mach/clock.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <asm/clkdev.h>
#include <asm/div64.h>
#include "crm_regs.h"
#define IO_ADDR_CCM(off) (MX21_IO_ADDRESS(MX21_CCM_BASE_ADDR + (off)))
/* Register offsets */
#define CCM_CSCR IO_ADDR_CCM(0x0)
#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
#define CCM_PCDR0 IO_ADDR_CCM(0x18)
#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
#define CCM_PCCR0 IO_ADDR_CCM(0x20)
#define CCM_PCCR1 IO_ADDR_CCM(0x24)
#define CCM_CCSR IO_ADDR_CCM(0x28)
#define CCM_PMCTL IO_ADDR_CCM(0x2c)
#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
#define CCM_CSCR_PRESC_OFFSET 29
#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
#define CCM_CSCR_USB_OFFSET 26
#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
#define CCM_CSCR_SD_OFFSET 24
#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
#define CCM_CSCR_SPLLRES (1 << 22)
#define CCM_CSCR_MPLLRES (1 << 21)
#define CCM_CSCR_SSI2_OFFSET 20
#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
#define CCM_CSCR_SSI1_OFFSET 19
#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
#define CCM_CSCR_FIR_OFFSET 18
#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
#define CCM_CSCR_SP (1 << 17)
#define CCM_CSCR_MCU (1 << 16)
#define CCM_CSCR_BCLK_OFFSET 10
#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
#define CCM_CSCR_IPDIV_OFFSET 9
#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
#define CCM_CSCR_OSC26MDIV (1 << 4)
#define CCM_CSCR_OSC26M (1 << 3)
#define CCM_CSCR_FPM (1 << 2)
#define CCM_CSCR_SPEN (1 << 1)
#define CCM_CSCR_MPEN 1
#define CCM_MPCTL0_CPLM (1 << 31)
#define CCM_MPCTL0_PD_OFFSET 26
#define CCM_MPCTL0_PD_MASK (0xf << 26)
#define CCM_MPCTL0_MFD_OFFSET 16
#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
#define CCM_MPCTL0_MFI_OFFSET 10
#define CCM_MPCTL0_MFI_MASK (0xf << 10)
#define CCM_MPCTL0_MFN_OFFSET 0
#define CCM_MPCTL0_MFN_MASK 0x3ff
#define CCM_MPCTL1_LF (1 << 15)
#define CCM_MPCTL1_BRMO (1 << 6)
#define CCM_SPCTL0_CPLM (1 << 31)
#define CCM_SPCTL0_PD_OFFSET 26
#define CCM_SPCTL0_PD_MASK (0xf << 26)
#define CCM_SPCTL0_MFD_OFFSET 16
#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
#define CCM_SPCTL0_MFI_OFFSET 10
#define CCM_SPCTL0_MFI_MASK (0xf << 10)
#define CCM_SPCTL0_MFN_OFFSET 0
#define CCM_SPCTL0_MFN_MASK 0x3ff
#define CCM_SPCTL1_LF (1 << 15)
#define CCM_SPCTL1_BRMO (1 << 6)
#define CCM_OSC26MCTL_PEAK_OFFSET 16
#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
#define CCM_OSC26MCTL_AGC_OFFSET 8
#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
#define CCM_OSC26MCTL_ANATEST_OFFSET 0
#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
#define CCM_PCDR0_NFCDIV_OFFSET 12
#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
#define CCM_PCDR0_48MDIV_OFFSET 5
#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
#define CCM_PCDR0_FIRIDIV_OFFSET 0
#define CCM_PCDR0_FIRIDIV_MASK 0x1f
#define CCM_PCDR1_PERDIV4_OFFSET 24
#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
#define CCM_PCDR1_PERDIV3_OFFSET 16
#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
#define CCM_PCDR1_PERDIV2_OFFSET 8
#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
#define CCM_PCDR1_PERDIV1_OFFSET 0
#define CCM_PCDR1_PERDIV1_MASK 0x3f
#define CCM_PCCR_HCLK_CSI_OFFSET 31
#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
#define CCM_PCCR_HCLK_DMA_OFFSET 30
#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
#define CCM_PCCR_HCLK_BROM_OFFSET 28
#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
#define CCM_PCCR_HCLK_EMMA_OFFSET 27
#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
#define CCM_PCCR_HCLK_LCDC_OFFSET 26
#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
#define CCM_PCCR_HCLK_BMI_OFFSET 23
#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
#define CCM_PCCR_PERCLK4_OFFSET 22
#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
#define CCM_PCCR_SLCDC_OFFSET 21
#define CCM_PCCR_SLCDC_REG CCM_PCCR0
#define CCM_PCCR_FIRI_BAUD_OFFSET 20
#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
#define CCM_PCCR_NFC_OFFSET 19
#define CCM_PCCR_NFC_REG CCM_PCCR0
#define CCM_PCCR_LCDC_OFFSET 18
#define CCM_PCCR_LCDC_REG CCM_PCCR0
#define CCM_PCCR_SSI1_BAUD_OFFSET 17
#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
#define CCM_PCCR_SSI2_BAUD_OFFSET 16
#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
#define CCM_PCCR_EMMA_OFFSET 15
#define CCM_PCCR_EMMA_REG CCM_PCCR0
#define CCM_PCCR_USBOTG_OFFSET 14
#define CCM_PCCR_USBOTG_REG CCM_PCCR0
#define CCM_PCCR_DMA_OFFSET 13
#define CCM_PCCR_DMA_REG CCM_PCCR0
#define CCM_PCCR_I2C1_OFFSET 12
#define CCM_PCCR_I2C1_REG CCM_PCCR0
#define CCM_PCCR_GPIO_OFFSET 11
#define CCM_PCCR_GPIO_REG CCM_PCCR0
#define CCM_PCCR_SDHC2_OFFSET 10
#define CCM_PCCR_SDHC2_REG CCM_PCCR0
#define CCM_PCCR_SDHC1_OFFSET 9
#define CCM_PCCR_SDHC1_REG CCM_PCCR0
#define CCM_PCCR_FIRI_OFFSET 8
#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
#define CCM_PCCR_FIRI_REG CCM_PCCR0
#define CCM_PCCR_SSI2_IPG_OFFSET 7
#define CCM_PCCR_SSI2_REG CCM_PCCR0
#define CCM_PCCR_SSI1_IPG_OFFSET 6
#define CCM_PCCR_SSI1_REG CCM_PCCR0
#define CCM_PCCR_CSPI2_OFFSET 5
#define CCM_PCCR_CSPI2_REG CCM_PCCR0
#define CCM_PCCR_CSPI1_OFFSET 4
#define CCM_PCCR_CSPI1_REG CCM_PCCR0
#define CCM_PCCR_UART4_OFFSET 3
#define CCM_PCCR_UART4_REG CCM_PCCR0
#define CCM_PCCR_UART3_OFFSET 2
#define CCM_PCCR_UART3_REG CCM_PCCR0
#define CCM_PCCR_UART2_OFFSET 1
#define CCM_PCCR_UART2_REG CCM_PCCR0
#define CCM_PCCR_UART1_OFFSET 0
#define CCM_PCCR_UART1_REG CCM_PCCR0
#define CCM_PCCR_OWIRE_OFFSET 31
#define CCM_PCCR_OWIRE_REG CCM_PCCR1
#define CCM_PCCR_KPP_OFFSET 30
#define CCM_PCCR_KPP_REG CCM_PCCR1
#define CCM_PCCR_RTC_OFFSET 29
#define CCM_PCCR_RTC_REG CCM_PCCR1
#define CCM_PCCR_PWM_OFFSET 28
#define CCM_PCCR_PWM_REG CCM_PCCR1
#define CCM_PCCR_GPT3_OFFSET 27
#define CCM_PCCR_GPT3_REG CCM_PCCR1
#define CCM_PCCR_GPT2_OFFSET 26
#define CCM_PCCR_GPT2_REG CCM_PCCR1
#define CCM_PCCR_GPT1_OFFSET 25
#define CCM_PCCR_GPT1_REG CCM_PCCR1
#define CCM_PCCR_WDT_OFFSET 24
#define CCM_PCCR_WDT_REG CCM_PCCR1
#define CCM_PCCR_CSPI3_OFFSET 23
#define CCM_PCCR_CSPI3_REG CCM_PCCR1
#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
#define CCM_CCSR_32KSR (1 << 15)
#define CCM_CCSR_CLKMODE1 (1 << 9)
#define CCM_CCSR_CLKMODE0 (1 << 8)
#define CCM_CCSR_CLKOSEL_OFFSET 0
#define CCM_CCSR_CLKOSEL_MASK 0x1f
#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
static int _clk_enable(struct clk *clk)
{
......@@ -1004,6 +1235,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
clk_enable(&uart_clk[0]);
#endif
mxc_timer_init(&gpt_clk[0], IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
mxc_timer_init(&gpt_clk[0], MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
MX21_INT_GPT1);
return 0;
}
arch/arm/mach-mx2/clock_imx27.c
浏览文件 @ b93a4afc
......@@ -29,21 +29,23 @@
#include <mach/common.h>
#include <mach/hardware.h>
#define IO_ADDR_CCM(off) (MX27_IO_ADDRESS(MX27_CCM_BASE_ADDR + (off)))
/* Register offsets */
#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
#define CCM_CSCR IO_ADDR_CCM(0x0)
#define CCM_MPCTL0 IO_ADDR_CCM(0x4)
#define CCM_MPCTL1 IO_ADDR_CCM(0x8)
#define CCM_SPCTL0 IO_ADDR_CCM(0xc)
#define CCM_SPCTL1 IO_ADDR_CCM(0x10)
#define CCM_OSC26MCTL IO_ADDR_CCM(0x14)
#define CCM_PCDR0 IO_ADDR_CCM(0x18)
#define CCM_PCDR1 IO_ADDR_CCM(0x1c)
#define CCM_PCCR0 IO_ADDR_CCM(0x20)
#define CCM_PCCR1 IO_ADDR_CCM(0x24)
#define CCM_CCSR IO_ADDR_CCM(0x28)
#define CCM_PMCTL IO_ADDR_CCM(0x2c)
#define CCM_PMCOUNT IO_ADDR_CCM(0x30)
#define CCM_WKGDCTL IO_ADDR_CCM(0x34)
#define CCM_CSCR_UPDATE_DIS (1 << 31)
#define CCM_CSCR_SSI2 (1 << 23)
......@@ -755,7 +757,8 @@ int __init mx27_clocks_init(unsigned long fref)
clk_enable(&uart1_clk);
#endif
mxc_timer_init(&gpt1_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT1);
mxc_timer_init(&gpt1_clk, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
MX27_INT_GPT1);
return 0;
}
......
arch/arm/mach-mx2/cpu_imx27.c
浏览文件 @ b93a4afc
......@@ -39,7 +39,8 @@ static void query_silicon_parameter(void)
* the silicon revision very early we read it here to
* avoid any further hooks
*/
val = __raw_readl(IO_ADDRESS(SYSCTRL_BASE_ADDR) + SYS_CHIP_ID);
val = __raw_readl(MX27_IO_ADDRESS(MX27_SYSCTRL_BASE_ADDR
+ SYS_CHIP_ID));
cpu_silicon_rev = (int)(val >> 28);
cpu_partnumber = (int)((val >> 12) & 0xFFFF);
......
arch/arm/mach-mx2/crm_regs.h 已删除 100644 → 0
浏览文件 @ 62c132a8
/*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright 2008 Juergen Beisert, kernel@pengutronix.de
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#ifndef __ARCH_ARM_MACH_MX2_CRM_REGS_H__
#define __ARCH_ARM_MACH_MX2_CRM_REGS_H__
#include <mach/hardware.h>
/* Register offsets */
#define CCM_CSCR (IO_ADDRESS(CCM_BASE_ADDR) + 0x0)
#define CCM_MPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x4)
#define CCM_MPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x8)
#define CCM_SPCTL0 (IO_ADDRESS(CCM_BASE_ADDR) + 0xC)
#define CCM_SPCTL1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x10)
#define CCM_OSC26MCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x14)
#define CCM_PCDR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x18)
#define CCM_PCDR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x1c)
#define CCM_PCCR0 (IO_ADDRESS(CCM_BASE_ADDR) + 0x20)
#define CCM_PCCR1 (IO_ADDRESS(CCM_BASE_ADDR) + 0x24)
#define CCM_CCSR (IO_ADDRESS(CCM_BASE_ADDR) + 0x28)
#define CCM_PMCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x2c)
#define CCM_PMCOUNT (IO_ADDRESS(CCM_BASE_ADDR) + 0x30)
#define CCM_WKGDCTL (IO_ADDRESS(CCM_BASE_ADDR) + 0x34)
#define CCM_CSCR_PRESC_OFFSET 29
#define CCM_CSCR_PRESC_MASK (0x7 << CCM_CSCR_PRESC_OFFSET)
#define CCM_CSCR_USB_OFFSET 26
#define CCM_CSCR_USB_MASK (0x7 << CCM_CSCR_USB_OFFSET)
#define CCM_CSCR_SD_OFFSET 24
#define CCM_CSCR_SD_MASK (0x3 << CCM_CSCR_SD_OFFSET)
#define CCM_CSCR_SPLLRES (1 << 22)
#define CCM_CSCR_MPLLRES (1 << 21)
#define CCM_CSCR_SSI2_OFFSET 20
#define CCM_CSCR_SSI2 (1 << CCM_CSCR_SSI2_OFFSET)
#define CCM_CSCR_SSI1_OFFSET 19
#define CCM_CSCR_SSI1 (1 << CCM_CSCR_SSI1_OFFSET)
#define CCM_CSCR_FIR_OFFSET 18
#define CCM_CSCR_FIR (1 << CCM_CSCR_FIR_OFFSET)
#define CCM_CSCR_SP (1 << 17)
#define CCM_CSCR_MCU (1 << 16)
#define CCM_CSCR_BCLK_OFFSET 10
#define CCM_CSCR_BCLK_MASK (0xf << CCM_CSCR_BCLK_OFFSET)
#define CCM_CSCR_IPDIV_OFFSET 9
#define CCM_CSCR_IPDIV (1 << CCM_CSCR_IPDIV_OFFSET)
#define CCM_CSCR_OSC26MDIV (1 << 4)
#define CCM_CSCR_OSC26M (1 << 3)
#define CCM_CSCR_FPM (1 << 2)
#define CCM_CSCR_SPEN (1 << 1)
#define CCM_CSCR_MPEN 1
#define CCM_MPCTL0_CPLM (1 << 31)
#define CCM_MPCTL0_PD_OFFSET 26
#define CCM_MPCTL0_PD_MASK (0xf << 26)
#define CCM_MPCTL0_MFD_OFFSET 16
#define CCM_MPCTL0_MFD_MASK (0x3ff << 16)
#define CCM_MPCTL0_MFI_OFFSET 10
#define CCM_MPCTL0_MFI_MASK (0xf << 10)
#define CCM_MPCTL0_MFN_OFFSET 0
#define CCM_MPCTL0_MFN_MASK 0x3ff
#define CCM_MPCTL1_LF (1 << 15)
#define CCM_MPCTL1_BRMO (1 << 6)
#define CCM_SPCTL0_CPLM (1 << 31)
#define CCM_SPCTL0_PD_OFFSET 26
#define CCM_SPCTL0_PD_MASK (0xf << 26)
#define CCM_SPCTL0_MFD_OFFSET 16
#define CCM_SPCTL0_MFD_MASK (0x3ff << 16)
#define CCM_SPCTL0_MFI_OFFSET 10
#define CCM_SPCTL0_MFI_MASK (0xf << 10)
#define CCM_SPCTL0_MFN_OFFSET 0
#define CCM_SPCTL0_MFN_MASK 0x3ff
#define CCM_SPCTL1_LF (1 << 15)
#define CCM_SPCTL1_BRMO (1 << 6)
#define CCM_OSC26MCTL_PEAK_OFFSET 16
#define CCM_OSC26MCTL_PEAK_MASK (0x3 << 16)
#define CCM_OSC26MCTL_AGC_OFFSET 8
#define CCM_OSC26MCTL_AGC_MASK (0x3f << 8)
#define CCM_OSC26MCTL_ANATEST_OFFSET 0
#define CCM_OSC26MCTL_ANATEST_MASK 0x3f
#define CCM_PCDR0_SSI2BAUDDIV_OFFSET 26
#define CCM_PCDR0_SSI2BAUDDIV_MASK (0x3f << 26)
#define CCM_PCDR0_SSI1BAUDDIV_OFFSET 16
#define CCM_PCDR0_SSI1BAUDDIV_MASK (0x3f << 16)
#define CCM_PCDR0_NFCDIV_OFFSET 12
#define CCM_PCDR0_NFCDIV_MASK (0xf << 12)
#define CCM_PCDR0_48MDIV_OFFSET 5
#define CCM_PCDR0_48MDIV_MASK (0x7 << CCM_PCDR0_48MDIV_OFFSET)
#define CCM_PCDR0_FIRIDIV_OFFSET 0
#define CCM_PCDR0_FIRIDIV_MASK 0x1f
#define CCM_PCDR1_PERDIV4_OFFSET 24
#define CCM_PCDR1_PERDIV4_MASK (0x3f << 24)
#define CCM_PCDR1_PERDIV3_OFFSET 16
#define CCM_PCDR1_PERDIV3_MASK (0x3f << 16)
#define CCM_PCDR1_PERDIV2_OFFSET 8
#define CCM_PCDR1_PERDIV2_MASK (0x3f << 8)
#define CCM_PCDR1_PERDIV1_OFFSET 0
#define CCM_PCDR1_PERDIV1_MASK 0x3f
#define CCM_PCCR_HCLK_CSI_OFFSET 31
#define CCM_PCCR_HCLK_CSI_REG CCM_PCCR0
#define CCM_PCCR_HCLK_DMA_OFFSET 30
#define CCM_PCCR_HCLK_DMA_REG CCM_PCCR0
#define CCM_PCCR_HCLK_BROM_OFFSET 28
#define CCM_PCCR_HCLK_BROM_REG CCM_PCCR0
#define CCM_PCCR_HCLK_EMMA_OFFSET 27
#define CCM_PCCR_HCLK_EMMA_REG CCM_PCCR0
#define CCM_PCCR_HCLK_LCDC_OFFSET 26
#define CCM_PCCR_HCLK_LCDC_REG CCM_PCCR0
#define CCM_PCCR_HCLK_SLCDC_OFFSET 25
#define CCM_PCCR_HCLK_SLCDC_REG CCM_PCCR0
#define CCM_PCCR_HCLK_USBOTG_OFFSET 24
#define CCM_PCCR_HCLK_USBOTG_REG CCM_PCCR0
#define CCM_PCCR_HCLK_BMI_OFFSET 23
#define CCM_PCCR_BMI_MASK (1 << CCM_PCCR_BMI_MASK)
#define CCM_PCCR_HCLK_BMI_REG CCM_PCCR0
#define CCM_PCCR_PERCLK4_OFFSET 22
#define CCM_PCCR_PERCLK4_REG CCM_PCCR0
#define CCM_PCCR_SLCDC_OFFSET 21
#define CCM_PCCR_SLCDC_REG CCM_PCCR0
#define CCM_PCCR_FIRI_BAUD_OFFSET 20
#define CCM_PCCR_FIRI_BAUD_MASK (1 << CCM_PCCR_FIRI_BAUD_MASK)
#define CCM_PCCR_FIRI_BAUD_REG CCM_PCCR0
#define CCM_PCCR_NFC_OFFSET 19
#define CCM_PCCR_NFC_REG CCM_PCCR0
#define CCM_PCCR_LCDC_OFFSET 18
#define CCM_PCCR_LCDC_REG CCM_PCCR0
#define CCM_PCCR_SSI1_BAUD_OFFSET 17
#define CCM_PCCR_SSI1_BAUD_REG CCM_PCCR0
#define CCM_PCCR_SSI2_BAUD_OFFSET 16
#define CCM_PCCR_SSI2_BAUD_REG CCM_PCCR0
#define CCM_PCCR_EMMA_OFFSET 15
#define CCM_PCCR_EMMA_REG CCM_PCCR0
#define CCM_PCCR_USBOTG_OFFSET 14
#define CCM_PCCR_USBOTG_REG CCM_PCCR0
#define CCM_PCCR_DMA_OFFSET 13
#define CCM_PCCR_DMA_REG CCM_PCCR0
#define CCM_PCCR_I2C1_OFFSET 12
#define CCM_PCCR_I2C1_REG CCM_PCCR0
#define CCM_PCCR_GPIO_OFFSET 11
#define CCM_PCCR_GPIO_REG CCM_PCCR0
#define CCM_PCCR_SDHC2_OFFSET 10
#define CCM_PCCR_SDHC2_REG CCM_PCCR0
#define CCM_PCCR_SDHC1_OFFSET 9
#define CCM_PCCR_SDHC1_REG CCM_PCCR0
#define CCM_PCCR_FIRI_OFFSET 8
#define CCM_PCCR_FIRI_MASK (1 << CCM_PCCR_BAUD_MASK)
#define CCM_PCCR_FIRI_REG CCM_PCCR0
#define CCM_PCCR_SSI2_IPG_OFFSET 7
#define CCM_PCCR_SSI2_REG CCM_PCCR0
#define CCM_PCCR_SSI1_IPG_OFFSET 6
#define CCM_PCCR_SSI1_REG CCM_PCCR0
#define CCM_PCCR_CSPI2_OFFSET 5
#define CCM_PCCR_CSPI2_REG CCM_PCCR0
#define CCM_PCCR_CSPI1_OFFSET 4
#define CCM_PCCR_CSPI1_REG CCM_PCCR0
#define CCM_PCCR_UART4_OFFSET 3
#define CCM_PCCR_UART4_REG CCM_PCCR0
#define CCM_PCCR_UART3_OFFSET 2
#define CCM_PCCR_UART3_REG CCM_PCCR0
#define CCM_PCCR_UART2_OFFSET 1
#define CCM_PCCR_UART2_REG CCM_PCCR0
#define CCM_PCCR_UART1_OFFSET 0
#define CCM_PCCR_UART1_REG CCM_PCCR0
#define CCM_PCCR_OWIRE_OFFSET 31
#define CCM_PCCR_OWIRE_REG CCM_PCCR1
#define CCM_PCCR_KPP_OFFSET 30
#define CCM_PCCR_KPP_REG CCM_PCCR1
#define CCM_PCCR_RTC_OFFSET 29
#define CCM_PCCR_RTC_REG CCM_PCCR1
#define CCM_PCCR_PWM_OFFSET 28
#define CCM_PCCR_PWM_REG CCM_PCCR1
#define CCM_PCCR_GPT3_OFFSET 27
#define CCM_PCCR_GPT3_REG CCM_PCCR1
#define CCM_PCCR_GPT2_OFFSET 26
#define CCM_PCCR_GPT2_REG CCM_PCCR1
#define CCM_PCCR_GPT1_OFFSET 25
#define CCM_PCCR_GPT1_REG CCM_PCCR1
#define CCM_PCCR_WDT_OFFSET 24
#define CCM_PCCR_WDT_REG CCM_PCCR1
#define CCM_PCCR_CSPI3_OFFSET 23
#define CCM_PCCR_CSPI3_REG CCM_PCCR1
#define CCM_PCCR_CSPI1_MASK (1 << CCM_PCCR_CSPI1_OFFSET)
#define CCM_PCCR_CSPI2_MASK (1 << CCM_PCCR_CSPI2_OFFSET)
#define CCM_PCCR_CSPI3_MASK (1 << CCM_PCCR_CSPI3_OFFSET)
#define CCM_PCCR_DMA_MASK (1 << CCM_PCCR_DMA_OFFSET)
#define CCM_PCCR_EMMA_MASK (1 << CCM_PCCR_EMMA_OFFSET)
#define CCM_PCCR_GPIO_MASK (1 << CCM_PCCR_GPIO_OFFSET)
#define CCM_PCCR_GPT1_MASK (1 << CCM_PCCR_GPT1_OFFSET)
#define CCM_PCCR_GPT2_MASK (1 << CCM_PCCR_GPT2_OFFSET)
#define CCM_PCCR_GPT3_MASK (1 << CCM_PCCR_GPT3_OFFSET)
#define CCM_PCCR_HCLK_BROM_MASK (1 << CCM_PCCR_HCLK_BROM_OFFSET)
#define CCM_PCCR_HCLK_CSI_MASK (1 << CCM_PCCR_HCLK_CSI_OFFSET)
#define CCM_PCCR_HCLK_DMA_MASK (1 << CCM_PCCR_HCLK_DMA_OFFSET)
#define CCM_PCCR_HCLK_EMMA_MASK (1 << CCM_PCCR_HCLK_EMMA_OFFSET)
#define CCM_PCCR_HCLK_LCDC_MASK (1 << CCM_PCCR_HCLK_LCDC_OFFSET)
#define CCM_PCCR_HCLK_SLCDC_MASK (1 << CCM_PCCR_HCLK_SLCDC_OFFSET)
#define CCM_PCCR_HCLK_USBOTG_MASK (1 << CCM_PCCR_HCLK_USBOTG_OFFSET)
#define CCM_PCCR_I2C1_MASK (1 << CCM_PCCR_I2C1_OFFSET)
#define CCM_PCCR_KPP_MASK (1 << CCM_PCCR_KPP_OFFSET)
#define CCM_PCCR_LCDC_MASK (1 << CCM_PCCR_LCDC_OFFSET)
#define CCM_PCCR_NFC_MASK (1 << CCM_PCCR_NFC_OFFSET)
#define CCM_PCCR_OWIRE_MASK (1 << CCM_PCCR_OWIRE_OFFSET)
#define CCM_PCCR_PERCLK4_MASK (1 << CCM_PCCR_PERCLK4_OFFSET)
#define CCM_PCCR_PWM_MASK (1 << CCM_PCCR_PWM_OFFSET)
#define CCM_PCCR_RTC_MASK (1 << CCM_PCCR_RTC_OFFSET)
#define CCM_PCCR_SDHC1_MASK (1 << CCM_PCCR_SDHC1_OFFSET)
#define CCM_PCCR_SDHC2_MASK (1 << CCM_PCCR_SDHC2_OFFSET)
#define CCM_PCCR_SLCDC_MASK (1 << CCM_PCCR_SLCDC_OFFSET)
#define CCM_PCCR_SSI1_BAUD_MASK (1 << CCM_PCCR_SSI1_BAUD_OFFSET)
#define CCM_PCCR_SSI1_IPG_MASK (1 << CCM_PCCR_SSI1_IPG_OFFSET)
#define CCM_PCCR_SSI2_BAUD_MASK (1 << CCM_PCCR_SSI2_BAUD_OFFSET)
#define CCM_PCCR_SSI2_IPG_MASK (1 << CCM_PCCR_SSI2_IPG_OFFSET)
#define CCM_PCCR_UART1_MASK (1 << CCM_PCCR_UART1_OFFSET)
#define CCM_PCCR_UART2_MASK (1 << CCM_PCCR_UART2_OFFSET)
#define CCM_PCCR_UART3_MASK (1 << CCM_PCCR_UART3_OFFSET)
#define CCM_PCCR_UART4_MASK (1 << CCM_PCCR_UART4_OFFSET)
#define CCM_PCCR_USBOTG_MASK (1 << CCM_PCCR_USBOTG_OFFSET)
#define CCM_PCCR_WDT_MASK (1 << CCM_PCCR_WDT_OFFSET)
#define CCM_CCSR_32KSR (1 << 15)
#define CCM_CCSR_CLKMODE1 (1 << 9)
#define CCM_CCSR_CLKMODE0 (1 << 8)
#define CCM_CCSR_CLKOSEL_OFFSET 0
#define CCM_CCSR_CLKOSEL_MASK 0x1f
#define SYS_FMCR 0x14 /* Functional Muxing Control Reg */
#define SYS_CHIP_ID 0x00 /* The offset of CHIP ID register */
#endif /* __ARCH_ARM_MACH_MX2_CRM_REGS_H__ */
arch/arm/mach-mx2/devices.c
浏览文件 @ b93a4afc
......@@ -46,65 +46,31 @@
* - i.MX21: 2 channel
* - i.MX27: 3 channel
*/
static struct resource mxc_spi_resources0[] = {
{
.start = CSPI1_BASE_ADDR,
.end = CSPI1_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_CSPI1,
.end = MXC_INT_CSPI1,
.flags = IORESOURCE_IRQ,
},
};
static struct resource mxc_spi_resources1[] = {
{
.start = CSPI2_BASE_ADDR,
.end = CSPI2_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_CSPI2,
.end = MXC_INT_CSPI2,
.flags = IORESOURCE_IRQ,
},
};
#ifdef CONFIG_MACH_MX27
static struct resource mxc_spi_resources2[] = {
{
.start = CSPI3_BASE_ADDR,
.end = CSPI3_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_CSPI3,
.end = MXC_INT_CSPI3,
.flags = IORESOURCE_IRQ,
},
};
#endif
struct platform_device mxc_spi_device0 = {
.name = "spi_imx",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_spi_resources0),
.resource = mxc_spi_resources0,
};
#define DEFINE_IMX_SPI_DEVICE(n, baseaddr, irq) \
static struct resource mxc_spi_resources ## n[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
}, \
}; \
\
struct platform_device mxc_spi_device ## n = { \
.name = "spi_imx", \
.id = n, \
.num_resources = ARRAY_SIZE(mxc_spi_resources ## n), \
.resource = mxc_spi_resources ## n, \
}
struct platform_device mxc_spi_device1 = {
.name = "spi_imx",
.id = 1,
.num_resources = ARRAY_SIZE(mxc_spi_resources1),
.resource = mxc_spi_resources1,
};
DEFINE_IMX_SPI_DEVICE(0, MX2x_CSPI1_BASE_ADDR, MX2x_INT_CSPI1);
DEFINE_IMX_SPI_DEVICE(1, MX2x_CSPI2_BASE_ADDR, MX2x_INT_CSPI2);
#ifdef CONFIG_MACH_MX27
struct platform_device mxc_spi_device2 = {
.name = "spi_imx",
.id = 2,
.num_resources = ARRAY_SIZE(mxc_spi_resources2),
.resource = mxc_spi_resources2,
};
DEFINE_IMX_SPI_DEVICE(2, MX27_CSPI3_BASE_ADDR, MX27_INT_CSPI3);
#endif
/*
......@@ -112,104 +78,34 @@ struct platform_device mxc_spi_device2 = {
* - i.MX21: 3 timers
* - i.MX27: 6 timers
*/
/* We use gpt0 as system timer, so do not add a device for this one */
static struct resource timer1_resources[] = {
{
.start = GPT2_BASE_ADDR,
.end = GPT2_BASE_ADDR + 0x17,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_GPT2,
.end = MXC_INT_GPT2,
.flags = IORESOURCE_IRQ,
#define DEFINE_IMX_GPT_DEVICE(n, baseaddr, irq) \
static struct resource timer ## n ##_resources[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
} \
}; \
\
struct platform_device mxc_gpt ## n = { \
.name = "imx_gpt", \
.id = n, \
.num_resources = ARRAY_SIZE(timer ## n ## _resources), \
.resource = timer ## n ## _resources, \
}
};
struct platform_device mxc_gpt1 = {
.name = "imx_gpt",
.id = 1,
.num_resources = ARRAY_SIZE(timer1_resources),
.resource = timer1_resources,
};
static struct resource timer2_resources[] = {
{
.start = GPT3_BASE_ADDR,
.end = GPT3_BASE_ADDR + 0x17,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_GPT3,
.end = MXC_INT_GPT3,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device mxc_gpt2 = {
.name = "imx_gpt",
.id = 2,
.num_resources = ARRAY_SIZE(timer2_resources),
.resource = timer2_resources,
};
/* We use gpt1 as system timer, so do not add a device for this one */
DEFINE_IMX_GPT_DEVICE(1, MX2x_GPT2_BASE_ADDR, MX2x_INT_GPT2);
DEFINE_IMX_GPT_DEVICE(2, MX2x_GPT3_BASE_ADDR, MX2x_INT_GPT3);
#ifdef CONFIG_MACH_MX27
static struct resource timer3_resources[] = {
{
.start = GPT4_BASE_ADDR,
.end = GPT4_BASE_ADDR + 0x17,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_GPT4,
.end = MXC_INT_GPT4,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device mxc_gpt3 = {
.name = "imx_gpt",
.id = 3,
.num_resources = ARRAY_SIZE(timer3_resources),
.resource = timer3_resources,
};
static struct resource timer4_resources[] = {
{
.start = GPT5_BASE_ADDR,
.end = GPT5_BASE_ADDR + 0x17,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_GPT5,
.end = MXC_INT_GPT5,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device mxc_gpt4 = {
.name = "imx_gpt",
.id = 4,
.num_resources = ARRAY_SIZE(timer4_resources),
.resource = timer4_resources,
};
static struct resource timer5_resources[] = {
{
.start = GPT6_BASE_ADDR,
.end = GPT6_BASE_ADDR + 0x17,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_GPT6,
.end = MXC_INT_GPT6,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device mxc_gpt5 = {
.name = "imx_gpt",
.id = 5,
.num_resources = ARRAY_SIZE(timer5_resources),
.resource = timer5_resources,
};
DEFINE_IMX_GPT_DEVICE(3, MX27_GPT4_BASE_ADDR, MX27_INT_GPT4);
DEFINE_IMX_GPT_DEVICE(4, MX27_GPT5_BASE_ADDR, MX27_INT_GPT5);
DEFINE_IMX_GPT_DEVICE(5, MX27_GPT6_BASE_ADDR, MX27_INT_GPT6);
#endif
/*
......@@ -220,9 +116,9 @@ struct platform_device mxc_gpt5 = {
*/
static struct resource mxc_wdt_resources[] = {
{
.start = WDOG_BASE_ADDR,
.end = WDOG_BASE_ADDR + 0x30,
.flags = IORESOURCE_MEM,
.start = MX2x_WDOG_BASE_ADDR,
.end = MX2x_WDOG_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
......@@ -235,8 +131,8 @@ struct platform_device mxc_wdt = {
static struct resource mxc_w1_master_resources[] = {
{
.start = OWIRE_BASE_ADDR,
.end = OWIRE_BASE_ADDR + SZ_4K - 1,
.start = MX2x_OWIRE_BASE_ADDR,
.end = MX2x_OWIRE_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
......@@ -248,24 +144,33 @@ struct platform_device mxc_w1_master_device = {
.resource = mxc_w1_master_resources,
};
static struct resource mxc_nand_resources[] = {
{
.start = NFC_BASE_ADDR,
.end = NFC_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_NANDFC,
.end = MXC_INT_NANDFC,
.flags = IORESOURCE_IRQ,
},
};
#define DEFINE_MXC_NAND_DEVICE(pfx, baseaddr, irq) \
static struct resource pfx ## _nand_resources[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
}, \
}; \
\
struct platform_device pfx ## _nand_device = { \
.name = "mxc_nand", \
.id = 0, \
.num_resources = ARRAY_SIZE(pfx ## _nand_resources), \
.resource = pfx ## _nand_resources, \
}
struct platform_device mxc_nand_device = {
.name = "mxc_nand",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_nand_resources),
.resource = mxc_nand_resources,
};
#ifdef CONFIG_MACH_MX21
DEFINE_MXC_NAND_DEVICE(imx21, MX21_NFC_BASE_ADDR, MX21_INT_NANDFC);
#endif
#ifdef CONFIG_MACH_MX27
DEFINE_MXC_NAND_DEVICE(imx27, MX27_NFC_BASE_ADDR, MX27_INT_NANDFC);
#endif
/*
* lcdc:
......@@ -275,12 +180,12 @@ struct platform_device mxc_nand_device = {
*/
static struct resource mxc_fb[] = {
{
.start = LCDC_BASE_ADDR,
.end = LCDC_BASE_ADDR + 0xFFF,
.start = MX2x_LCDC_BASE_ADDR,
.end = MX2x_LCDC_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_LCDC,
.end = MXC_INT_LCDC,
.start = MX2x_INT_LCDC,
.end = MX2x_INT_LCDC,
.flags = IORESOURCE_IRQ,
}
};
......@@ -299,13 +204,13 @@ struct platform_device mxc_fb_device = {
#ifdef CONFIG_MACH_MX27
static struct resource mxc_fec_resources[] = {
{
.start = FEC_BASE_ADDR,
.end = FEC_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
.start = MX27_FEC_BASE_ADDR,
.end = MX27_FEC_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_FEC,
.end = MXC_INT_FEC,
.flags = IORESOURCE_IRQ,
.start = MX27_INT_FEC,
.end = MX27_INT_FEC,
.flags = IORESOURCE_IRQ,
},
};
......@@ -317,55 +222,41 @@ struct platform_device mxc_fec_device = {
};
#endif
static struct resource mxc_i2c_1_resources[] = {
{
.start = I2C_BASE_ADDR,
.end = I2C_BASE_ADDR + 0x0fff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_I2C,
.end = MXC_INT_I2C,
.flags = IORESOURCE_IRQ,
#define DEFINE_IMX_I2C_DEVICE(n, baseaddr, irq) \
static struct resource mxc_i2c_resources ## n[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
} \
}; \
\
struct platform_device mxc_i2c_device ## n = { \
.name = "imx-i2c", \
.id = n, \
.num_resources = ARRAY_SIZE(mxc_i2c_resources ## n), \
.resource = mxc_i2c_resources ## n, \
}
};
struct platform_device mxc_i2c_device0 = {
.name = "imx-i2c",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_i2c_1_resources),
.resource = mxc_i2c_1_resources,
};
DEFINE_IMX_I2C_DEVICE(0, MX2x_I2C_BASE_ADDR, MX2x_INT_I2C);
#ifdef CONFIG_MACH_MX27
static struct resource mxc_i2c_2_resources[] = {
{
.start = I2C2_BASE_ADDR,
.end = I2C2_BASE_ADDR + 0x0fff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_I2C2,
.end = MXC_INT_I2C2,
.flags = IORESOURCE_IRQ,
}
};
struct platform_device mxc_i2c_device1 = {
.name = "imx-i2c",
.id = 1,
.num_resources = ARRAY_SIZE(mxc_i2c_2_resources),
.resource = mxc_i2c_2_resources,
};
DEFINE_IMX_I2C_DEVICE(1, MX27_I2C2_BASE_ADDR, MX27_INT_I2C2);
#endif
static struct resource mxc_pwm_resources[] = {
{
.start = PWM_BASE_ADDR,
.end = PWM_BASE_ADDR + 0x0fff,
.flags = IORESOURCE_MEM,
.start = MX2x_PWM_BASE_ADDR,
.end = MX2x_PWM_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_PWM,
.end = MXC_INT_PWM,
.flags = IORESOURCE_IRQ,
.start = MX2x_INT_PWM,
.end = MX2x_INT_PWM,
.flags = IORESOURCE_IRQ,
}
};
......@@ -379,74 +270,49 @@ struct platform_device mxc_pwm_device = {
/*
* Resource definition for the MXC SDHC
*/
static struct resource mxc_sdhc1_resources[] = {
{
.start = SDHC1_BASE_ADDR,
.end = SDHC1_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_SDHC1,
.end = MXC_INT_SDHC1,
.flags = IORESOURCE_IRQ,
}, {
.start = DMA_REQ_SDHC1,
.end = DMA_REQ_SDHC1,
.flags = IORESOURCE_DMA,
},
};
static u64 mxc_sdhc1_dmamask = 0xffffffffUL;
struct platform_device mxc_sdhc_device0 = {
.name = "mxc-mmc",
.id = 0,
.dev = {
.dma_mask = &mxc_sdhc1_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(mxc_sdhc1_resources),
.resource = mxc_sdhc1_resources,
};
static struct resource mxc_sdhc2_resources[] = {
{
.start = SDHC2_BASE_ADDR,
.end = SDHC2_BASE_ADDR + SZ_4K - 1,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_SDHC2,
.end = MXC_INT_SDHC2,
.flags = IORESOURCE_IRQ,
}, {
.start = DMA_REQ_SDHC2,
.end = DMA_REQ_SDHC2,
.flags = IORESOURCE_DMA,
},
};
#define DEFINE_MXC_MMC_DEVICE(n, baseaddr, irq, dmareq) \
static struct resource mxc_sdhc_resources ## n[] = { \
{ \
.start = baseaddr, \
.end = baseaddr + SZ_4K - 1, \
.flags = IORESOURCE_MEM, \
}, { \
.start = irq, \
.end = irq, \
.flags = IORESOURCE_IRQ, \
}, { \
.start = dmareq, \
.end = dmareq, \
.flags = IORESOURCE_DMA, \
}, \
}; \
\
static u64 mxc_sdhc ## n ## _dmamask = 0xffffffffUL; \
\
struct platform_device mxc_sdhc_device ## n = { \
.name = "mxc-mmc", \
.id = n, \
.dev = { \
.dma_mask = &mxc_sdhc ## n ## _dmamask, \
.coherent_dma_mask = 0xffffffff, \
}, \
.num_resources = ARRAY_SIZE(mxc_sdhc_resources ## n), \
.resource = mxc_sdhc_resources ## n, \
}
static u64 mxc_sdhc2_dmamask = 0xffffffffUL;
struct platform_device mxc_sdhc_device1 = {
.name = "mxc-mmc",
.id = 1,
.dev = {
.dma_mask = &mxc_sdhc2_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(mxc_sdhc2_resources),
.resource = mxc_sdhc2_resources,
};
DEFINE_MXC_MMC_DEVICE(0, MX2x_SDHC1_BASE_ADDR, MX2x_INT_SDHC1, MX2x_DMA_REQ_SDHC1);
DEFINE_MXC_MMC_DEVICE(1, MX2x_SDHC2_BASE_ADDR, MX2x_INT_SDHC2, MX2x_DMA_REQ_SDHC2);
#ifdef CONFIG_MACH_MX27
static struct resource otg_resources[] = {
{
.start = OTG_BASE_ADDR,
.end = OTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
.start = MX27_USBOTG_BASE_ADDR,
.end = MX27_USBOTG_BASE_ADDR + 0x1ff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_USB3,
.end = MXC_INT_USB3,
.flags = IORESOURCE_IRQ,
.start = MX27_INT_USB3,
.end = MX27_INT_USB3,
.flags = IORESOURCE_IRQ,
},
};
......@@ -454,14 +320,14 @@ static u64 otg_dmamask = 0xffffffffUL;
/* OTG gadget device */
struct platform_device mxc_otg_udc_device = {
.name = "fsl-usb2-udc",
.id = -1,
.dev = {
.dma_mask = &otg_dmamask,
.coherent_dma_mask = 0xffffffffUL,
.name = "fsl-usb2-udc",
.id = -1,
.dev = {
.dma_mask = &otg_dmamask,
.coherent_dma_mask = 0xffffffffUL,
},
.resource = otg_resources,
.num_resources = ARRAY_SIZE(otg_resources),
.resource = otg_resources,
.num_resources = ARRAY_SIZE(otg_resources),
};
/* OTG host */
......@@ -482,12 +348,12 @@ static u64 usbh1_dmamask = 0xffffffffUL;
static struct resource mxc_usbh1_resources[] = {
{
.start = OTG_BASE_ADDR + 0x200,
.end = OTG_BASE_ADDR + 0x3ff,
.start = MX27_USBOTG_BASE_ADDR + 0x200,
.end = MX27_USBOTG_BASE_ADDR + 0x3ff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_USB1,
.end = MXC_INT_USB1,
.start = MX27_INT_USB1,
.end = MX27_INT_USB1,
.flags = IORESOURCE_IRQ,
},
};
......@@ -508,12 +374,12 @@ static u64 usbh2_dmamask = 0xffffffffUL;
static struct resource mxc_usbh2_resources[] = {
{
.start = OTG_BASE_ADDR + 0x400,
.end = OTG_BASE_ADDR + 0x5ff,
.start = MX27_USBOTG_BASE_ADDR + 0x400,
.end = MX27_USBOTG_BASE_ADDR + 0x5ff,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_USB2,
.end = MXC_INT_USB2,
.start = MX27_INT_USB2,
.end = MX27_INT_USB2,
.flags = IORESOURCE_IRQ,
},
};
......@@ -530,115 +396,88 @@ struct platform_device mxc_usbh2 = {
};
#endif
static struct resource imx_ssi_resources0[] = {
{
.start = SSI1_BASE_ADDR,
.end = SSI1_BASE_ADDR + 0x6F,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_SSI1,
.end = MXC_INT_SSI1,
.flags = IORESOURCE_IRQ,
}, {
.name = "tx0",
.start = DMA_REQ_SSI1_TX0,
.end = DMA_REQ_SSI1_TX0,
.flags = IORESOURCE_DMA,
}, {
.name = "rx0",
.start = DMA_REQ_SSI1_RX0,
.end = DMA_REQ_SSI1_RX0,
.flags = IORESOURCE_DMA,
}, {
.name = "tx1",
.start = DMA_REQ_SSI1_TX1,
.end = DMA_REQ_SSI1_TX1,
.flags = IORESOURCE_DMA,
}, {
.name = "rx1",
.start = DMA_REQ_SSI1_RX1,
.end = DMA_REQ_SSI1_RX1,
.flags = IORESOURCE_DMA,
},
};
static struct resource imx_ssi_resources1[] = {
{
.start = SSI2_BASE_ADDR,
.end = SSI2_BASE_ADDR + 0x6F,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_SSI2,
.end = MXC_INT_SSI2,
.flags = IORESOURCE_IRQ,
}, {
.name = "tx0",
.start = DMA_REQ_SSI2_TX0,
.end = DMA_REQ_SSI2_TX0,
.flags = IORESOURCE_DMA,
}, {
.name = "rx0",
.start = DMA_REQ_SSI2_RX0,
.end = DMA_REQ_SSI2_RX0,
.flags = IORESOURCE_DMA,
}, {
.name = "tx1",
.start = DMA_REQ_SSI2_TX1,
.end = DMA_REQ_SSI2_TX1,
.flags = IORESOURCE_DMA,
}, {
.name = "rx1",
.start = DMA_REQ_SSI2_RX1,
.end = DMA_REQ_SSI2_RX1,
.flags = IORESOURCE_DMA,
},
};
#define DEFINE_IMX_SSI_DMARES(_name, ssin, suffix) \
{ \
.name = _name, \
.start = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \
.end = MX2x_DMA_REQ_SSI ## ssin ## _ ## suffix, \
.flags = IORESOURCE_DMA, \
}
struct platform_device imx_ssi_device0 = {
.name = "imx-ssi",
.id = 0,
.num_resources = ARRAY_SIZE(imx_ssi_resources0),
.resource = imx_ssi_resources0,
};
#define DEFINE_IMX_SSI_DEVICE(n, ssin, baseaddr, irq) \
static struct resource imx_ssi_resources ## n[] = { \
{ \
.start = MX2x_SSI ## ssin ## _BASE_ADDR, \
.end = MX2x_SSI ## ssin ## _BASE_ADDR + 0x6f, \
.flags = IORESOURCE_MEM, \
}, { \
.start = MX2x_INT_SSI1, \
.end = MX2x_INT_SSI1, \
.flags = IORESOURCE_IRQ, \
}, \
DEFINE_IMX_SSI_DMARES("tx0", ssin, TX0), \
DEFINE_IMX_SSI_DMARES("rx0", ssin, RX0), \
DEFINE_IMX_SSI_DMARES("tx1", ssin, TX1), \
DEFINE_IMX_SSI_DMARES("rx1", ssin, RX1), \
}; \
\
struct platform_device imx_ssi_device ## n = { \
.name = "imx-ssi", \
.id = n, \
.num_resources = ARRAY_SIZE(imx_ssi_resources ## n), \
.resource = imx_ssi_resources ## n, \
}
struct platform_device imx_ssi_device1 = {
.name = "imx-ssi",
.id = 1,
.num_resources = ARRAY_SIZE(imx_ssi_resources1),
.resource = imx_ssi_resources1,
};
DEFINE_IMX_SSI_DEVICE(0, 1, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
DEFINE_IMX_SSI_DEVICE(1, 2, MX2x_SSI1_BASE_ADDR, MX2x_INT_SSI1);
/* GPIO port description */
static struct mxc_gpio_port imx_gpio_ports[] = {
{
.chip.label = "gpio-0",
.irq = MXC_INT_GPIO,
.base = IO_ADDRESS(GPIO_BASE_ADDR),
.virtual_irq_start = MXC_GPIO_IRQ_START,
}, {
.chip.label = "gpio-1",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x100),
.virtual_irq_start = MXC_GPIO_IRQ_START + 32,
}, {
.chip.label = "gpio-2",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x200),
.virtual_irq_start = MXC_GPIO_IRQ_START + 64,
}, {
.chip.label = "gpio-3",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x300),
.virtual_irq_start = MXC_GPIO_IRQ_START + 96,
}, {
.chip.label = "gpio-4",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x400),
.virtual_irq_start = MXC_GPIO_IRQ_START + 128,
}, {
.chip.label = "gpio-5",
.base = IO_ADDRESS(GPIO_BASE_ADDR + 0x500),
.virtual_irq_start = MXC_GPIO_IRQ_START + 160,
#define DEFINE_MXC_GPIO_PORT_IRQ(SOC, n, _irq) \
{ \
.chip.label = "gpio-" #n, \
.irq = _irq, \
.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
n * 0x100), \
.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
}
};
#define DEFINE_MXC_GPIO_PORT(SOC, n) \
{ \
.chip.label = "gpio-" #n, \
.base = SOC ## _IO_ADDRESS(MX2x_GPIO_BASE_ADDR + \
n * 0x100), \
.virtual_irq_start = MXC_GPIO_IRQ_START + n * 32, \
}
#define DEFINE_MXC_GPIO_PORTS(SOC, pfx) \
static struct mxc_gpio_port pfx ## _gpio_ports[] = { \
DEFINE_MXC_GPIO_PORT_IRQ(SOC, 0, SOC ## _INT_GPIO), \
DEFINE_MXC_GPIO_PORT(SOC, 1), \
DEFINE_MXC_GPIO_PORT(SOC, 2), \
DEFINE_MXC_GPIO_PORT(SOC, 3), \
DEFINE_MXC_GPIO_PORT(SOC, 4), \
DEFINE_MXC_GPIO_PORT(SOC, 5), \
}
#ifdef CONFIG_MACH_MX21
DEFINE_MXC_GPIO_PORTS(MX21, imx21);
#endif
#ifdef CONFIG_MACH_MX27
DEFINE_MXC_GPIO_PORTS(MX27, imx27);
#endif
int __init mxc_register_gpios(void)
{
return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
#ifdef CONFIG_MACH_MX21
if (cpu_is_mx21())
return mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports));
else
#endif
#ifdef CONFIG_MACH_MX27
if (cpu_is_mx27())
return mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports));
else
#endif
return 0;
}
arch/arm/mach-mx2/devices.h
浏览文件 @ b93a4afc
extern struct platform_device mxc_gpt1;
extern struct platform_device mxc_gpt2;
#ifdef CONFIG_MACH_MX27
extern struct platform_device mxc_gpt3;
extern struct platform_device mxc_gpt4;
extern struct platform_device mxc_gpt5;
#endif
extern struct platform_device mxc_wdt;
extern struct platform_device mxc_uart_device0;
extern struct platform_device mxc_uart_device1;
......@@ -11,12 +13,19 @@ extern struct platform_device mxc_uart_device3;
extern struct platform_device mxc_uart_device4;
extern struct platform_device mxc_uart_device5;
extern struct platform_device mxc_w1_master_device;
extern struct platform_device mxc_nand_device;
#ifdef CONFIG_MACH_MX21
extern struct platform_device imx21_nand_device;
#endif
#ifdef CONFIG_MACH_MX27
extern struct platform_device imx27_nand_device;
#endif
extern struct platform_device mxc_fb_device;
extern struct platform_device mxc_fec_device;
extern struct platform_device mxc_pwm_device;
extern struct platform_device mxc_i2c_device0;
#ifdef CONFIG_MACH_MX27
extern struct platform_device mxc_i2c_device1;
#endif
extern struct platform_device mxc_sdhc_device0;
extern struct platform_device mxc_sdhc_device1;
extern struct platform_device mxc_otg_udc_device;
......@@ -25,6 +34,8 @@ extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_spi_device0;
extern struct platform_device mxc_spi_device1;
#ifdef CONFIG_MACH_MX27
extern struct platform_device mxc_spi_device2;
#endif
extern struct platform_device imx_ssi_device0;
extern struct platform_device imx_ssi_device1;
arch/arm/mach-mx2/eukrea_mbimx27-baseboard.c
浏览文件 @ b93a4afc
......@@ -28,7 +28,7 @@
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include <mach/imxfb.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
......
arch/arm/mach-mx2/eukrea_cpuimx27.c → arch/arm/mach-mx2/mach-cpuimx27.c
浏览文件 @ b93a4afc
......@@ -36,7 +36,7 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
......@@ -142,28 +142,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = {
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
static struct plat_serial8250_port serial_platform_data[] = {
{
.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x200000),
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000),
.irq = IRQ_GPIOB(23),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x400000),
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000),
.irq = IRQ_GPIOB(22),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x800000),
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000),
.irq = IRQ_GPIOB(27),
.uartclk = 14745600,
.regshift = 1,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP,
}, {
.mapbase = (unsigned long)(CS3_BASE_ADDR + 0x1000000),
.mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000),
.irq = IRQ_GPIOB(30),
.uartclk = 14745600,
.regshift = 1,
......@@ -189,7 +189,8 @@ static void __init eukrea_cpuimx27_init(void)
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_nand_device, &eukrea_cpuimx27_nand_board_info);
mxc_register_device(&imx27_nand_device,
&eukrea_cpuimx27_nand_board_info);
i2c_register_board_info(0, eukrea_cpuimx27_i2c_devices,
ARRAY_SIZE(eukrea_cpuimx27_i2c_devices));
......@@ -224,9 +225,9 @@ static struct sys_timer eukrea_cpuimx27_timer = {
};
MACHINE_START(CPUIMX27, "EUKREA CPUIMX27")
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = eukrea_cpuimx27_init,
......
arch/arm/mach-mx2/mx27lite.c → arch/arm/mach-mx2/mach-imx27lite.c
浏览文件 @ b93a4afc
......@@ -27,7 +27,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include <mach/board-mx27lite.h>
#include "devices.h"
......@@ -85,9 +85,9 @@ static struct sys_timer mx27lite_timer = {
};
MACHINE_START(IMX27LITE, "LogicPD i.MX27LITE")
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = mx27lite_init,
......
arch/arm/mach-mx2/mx21ads.c → arch/arm/mach-mx2/mach-mx21ads.c
浏览文件 @ b93a4afc
......@@ -30,7 +30,7 @@
#include <asm/mach/map.h>
#include <mach/imx-uart.h>
#include <mach/imxfb.h>
#include <mach/iomux.h>
#include <mach/iomux-mx21.h>
#include <mach/mxc_nand.h>
#include <mach/mmc.h>
#include <mach/board-mx21ads.h>
......@@ -118,8 +118,8 @@ static struct physmap_flash_data mx21ads_flash_data = {
};
static struct resource mx21ads_flash_resource = {
.start = CS0_BASE_ADDR,
.end = CS0_BASE_ADDR + 0x02000000 - 1,
.start = MX21_CS0_BASE_ADDR,
.end = MX21_CS0_BASE_ADDR + 0x02000000 - 1,
.flags = IORESOURCE_MEM,
};
......@@ -242,7 +242,7 @@ static struct map_desc mx21ads_io_desc[] __initdata = {
*/
{
.virtual = MX21ADS_MMIO_BASE_ADDR,
.pfn = __phys_to_pfn(CS1_BASE_ADDR),
.pfn = __phys_to_pfn(MX21_CS1_BASE_ADDR),
.length = MX21ADS_MMIO_SIZE,
.type = MT_DEVICE,
},
......@@ -268,7 +268,7 @@ static void __init mx21ads_board_init(void)
mxc_register_device(&mxc_uart_device3, &uart_pdata);
mxc_register_device(&mxc_fb_device, &mx21ads_fb_data);
mxc_register_device(&mxc_sdhc_device0, &mx21ads_sdhc_pdata);
mxc_register_device(&mxc_nand_device, &mx21ads_nand_board_info);
mxc_register_device(&imx21_nand_device, &mx21ads_nand_board_info);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
......@@ -284,9 +284,9 @@ static struct sys_timer mx21ads_timer = {
MACHINE_START(MX21ADS, "Freescale i.MX21ADS")
/* maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX21_AIPI_BASE_ADDR,
.io_pg_offst = ((MX21_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = MX21_PHYS_OFFSET + 0x100,
.map_io = mx21ads_map_io,
.init_irq = mx21_init_irq,
.init_machine = mx21ads_board_init,
......
arch/arm/mach-mx2/mx27pdk.c → arch/arm/mach-mx2/mach-mx27_3ds.c
浏览文件 @ b93a4afc
......@@ -26,7 +26,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include <mach/board-mx27pdk.h>
#include "devices.h"
......@@ -85,9 +85,9 @@ static struct sys_timer mx27pdk_timer = {
MACHINE_START(MX27_3DS, "Freescale MX27PDK")
/* maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = mx27pdk_init,
......
arch/arm/mach-mx2/mx27ads.c → arch/arm/mach-mx2/mach-mx27ads.c
浏览文件 @ b93a4afc
......@@ -33,7 +33,7 @@
#include <asm/mach/map.h>
#include <mach/gpio.h>
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include <mach/board-mx27ads.h>
#include <mach/mxc_nand.h>
#include <mach/i2c.h>
......@@ -290,7 +290,7 @@ static void __init mx27ads_board_init(void)
mxc_register_device(&mxc_uart_device3, &uart_pdata[3]);
mxc_register_device(&mxc_uart_device4, &uart_pdata[4]);
mxc_register_device(&mxc_uart_device5, &uart_pdata[5]);
mxc_register_device(&mxc_nand_device, &mx27ads_nand_board_info);
mxc_register_device(&imx27_nand_device, &mx27ads_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, mx27ads_i2c_devices,
......@@ -320,7 +320,7 @@ static struct sys_timer mx27ads_timer = {
static struct map_desc mx27ads_io_desc[] __initdata = {
{
.virtual = PBC_BASE_ADDRESS,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.pfn = __phys_to_pfn(MX27_CS4_BASE_ADDR),
.length = SZ_1M,
.type = MT_DEVICE,
},
......@@ -334,9 +334,9 @@ static void __init mx27ads_map_io(void)
MACHINE_START(MX27ADS, "Freescale i.MX27ADS")
/* maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27ads_map_io,
.init_irq = mx27_init_irq,
.init_machine = mx27ads_board_init,
......
arch/arm/mach-mx2/mxt_td60.c → arch/arm/mach-mx2/mach-mxt_td60.c
浏览文件 @ b93a4afc
......@@ -33,7 +33,7 @@
#include <asm/mach/map.h>
#include <linux/gpio.h>
#include <mach/imx-uart.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include <mach/mxc_nand.h>
#include <mach/i2c.h>
#include <linux/i2c/pca953x.h>
......@@ -257,7 +257,7 @@ static void __init mxt_td60_board_init(void)
mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
mxc_register_device(&imx27_nand_device, &mxt_td60_nand_board_info);
i2c_register_board_info(0, mxt_td60_i2c_devices,
ARRAY_SIZE(mxt_td60_i2c_devices));
......@@ -284,9 +284,9 @@ static struct sys_timer mxt_td60_timer = {
MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
/* maintainer: Maxtrack Industrial */
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = mxt_td60_board_init,
......
arch/arm/mach-mx2/pca100.c → arch/arm/mach-mx2/mach-pca100.c
浏览文件 @ b93a4afc
......@@ -25,25 +25,36 @@
#include <linux/spi/spi.h>
#include <linux/spi/eeprom.h>
#include <linux/irq.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/usb/otg.h>
#include <linux/usb/ulpi.h>
#include <linux/fsl_devices.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include <mach/i2c.h>
#include <asm/mach/time.h>
#if defined(CONFIG_SPI_IMX) || defined(CONFIG_SPI_IMX_MODULE)
#include <mach/spi.h>
#endif
#include <mach/imx-uart.h>
#include <mach/audmux.h>
#include <mach/ssi.h>
#include <mach/mxc_nand.h>
#include <mach/irqs.h>
#include <mach/mmc.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
#define OTG_PHY_CS_GPIO (GPIO_PORTB + 23)
#define USBH2_PHY_CS_GPIO (GPIO_PORTB + 24)
static int pca100_pins[] = {
/* UART1 */
PE12_PF_UART1_TXD,
......@@ -92,6 +103,34 @@ static int pca100_pins[] = {
PD29_PF_CSPI1_SCLK,
PD30_PF_CSPI1_MISO,
PD31_PF_CSPI1_MOSI,
/* OTG */
OTG_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
PC7_PF_USBOTG_DATA5,
PC8_PF_USBOTG_DATA6,
PC9_PF_USBOTG_DATA0,
PC10_PF_USBOTG_DATA2,
PC11_PF_USBOTG_DATA1,
PC12_PF_USBOTG_DATA4,
PC13_PF_USBOTG_DATA3,
PE0_PF_USBOTG_NXT,
PE1_PF_USBOTG_STP,
PE2_PF_USBOTG_DIR,
PE24_PF_USBOTG_CLK,
PE25_PF_USBOTG_DATA7,
/* USBH2 */
USBH2_PHY_CS_GPIO | GPIO_GPIO | GPIO_OUT,
PA0_PF_USBH2_CLK,
PA1_PF_USBH2_DIR,
PA2_PF_USBH2_DATA7,
PA3_PF_USBH2_NXT,
PA4_PF_USBH2_STP,
PD19_AF_USBH2_DATA4,
PD20_AF_USBH2_DATA3,
PD21_AF_USBH2_DATA6,
PD22_AF_USBH2_DATA0,
PD23_AF_USBH2_DATA2,
PD24_AF_USBH2_DATA1,
PD26_AF_USBH2_DATA5,
};
static struct imxuart_platform_data uart_pdata = {
......@@ -157,6 +196,37 @@ static struct spi_imx_master pca100_spi_0_data = {
};
#endif
static void pca100_ac97_warm_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT);
gpio_set_value(GPIO_PORTC + 20, 1);
udelay(2);
gpio_set_value(GPIO_PORTC + 20, 0);
mxc_gpio_mode(PC20_PF_SSI1_FS);
msleep(2);
}
static void pca100_ac97_cold_reset(struct snd_ac97 *ac97)
{
mxc_gpio_mode(GPIO_PORTC | 20 | GPIO_GPIO | GPIO_OUT); /* FS */
gpio_set_value(GPIO_PORTC + 20, 0);
mxc_gpio_mode(GPIO_PORTC | 22 | GPIO_GPIO | GPIO_OUT); /* TX */
gpio_set_value(GPIO_PORTC + 22, 0);
mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_OUT); /* reset */
gpio_set_value(GPIO_PORTC + 28, 0);
udelay(10);
gpio_set_value(GPIO_PORTC + 28, 1);
mxc_gpio_mode(PC20_PF_SSI1_FS);
mxc_gpio_mode(PC22_PF_SSI1_TXD);
msleep(2);
}
static struct imx_ssi_platform_data pca100_ssi_pdata = {
.ac97_reset = pca100_ac97_cold_reset,
.ac97_warm_reset = pca100_ac97_warm_reset,
.flags = IMX_SSI_USE_AC97,
};
static int pca100_sdhc2_init(struct device *dev, irq_handler_t detect_irq,
void *data)
{
......@@ -182,21 +252,79 @@ static struct imxmmc_platform_data sdhc_pdata = {
.exit = pca100_sdhc2_exit,
};
static int otg_phy_init(struct platform_device *pdev)
{
gpio_set_value(OTG_PHY_CS_GPIO, 0);
return 0;
}
static struct mxc_usbh_platform_data otg_pdata = {
.init = otg_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static int usbh2_phy_init(struct platform_device *pdev)
{
gpio_set_value(USBH2_PHY_CS_GPIO, 0);
return 0;
}
static struct mxc_usbh_platform_data usbh2_pdata = {
.init = usbh2_phy_init,
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_INTERFACE_DIFF_UNI,
};
static struct fsl_usb2_platform_data otg_device_pdata = {
.operating_mode = FSL_USB2_DR_DEVICE,
.phy_mode = FSL_USB2_PHY_ULPI,
};
static int otg_mode_host;
static int __init pca100_otg_mode(char *options)
{
if (!strcmp(options, "host"))
otg_mode_host = 1;
else if (!strcmp(options, "device"))
otg_mode_host = 0;
else
pr_info("otg_mode neither \"host\" nor \"device\". "
"Defaulting to device\n");
return 0;
}
__setup("otg_mode=", pca100_otg_mode);
static void __init pca100_init(void)
{
int ret;
/* SSI unit */
mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0,
MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
MXC_AUDMUX_V1_PCR_TFCSEL(3) |
MXC_AUDMUX_V1_PCR_TCLKDIR | /* clock is output */
MXC_AUDMUX_V1_PCR_RXDSEL(3));
mxc_audmux_v1_configure_port(3,
MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */
MXC_AUDMUX_V1_PCR_TFCSEL(0) |
MXC_AUDMUX_V1_PCR_TFSDIR |
MXC_AUDMUX_V1_PCR_RXDSEL(0));
ret = mxc_gpio_setup_multiple_pins(pca100_pins,
ARRAY_SIZE(pca100_pins), "PCA100");
if (ret)
printk(KERN_ERR "pca100: Failed to setup pins (%d)\n", ret);
mxc_register_device(&imx_ssi_device0, &pca100_ssi_pdata);
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_gpio_mode(GPIO_PORTC | 29 | GPIO_GPIO | GPIO_IN);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
mxc_register_device(&mxc_nand_device, &pca100_nand_board_info);
mxc_register_device(&imx27_nand_device, &pca100_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pca100_i2c_devices,
......@@ -220,6 +348,29 @@ static void __init pca100_init(void)
mxc_register_device(&mxc_spi_device0, &pca100_spi_0_data);
#endif
gpio_request(OTG_PHY_CS_GPIO, "usb-otg-cs");
gpio_direction_output(OTG_PHY_CS_GPIO, 1);
gpio_request(USBH2_PHY_CS_GPIO, "usb-host2-cs");
gpio_direction_output(USBH2_PHY_CS_GPIO, 1);
#if defined(CONFIG_USB_ULPI)
if (otg_mode_host) {
otg_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_otg_host, &otg_pdata);
}
usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
#endif
if (!otg_mode_host) {
gpio_set_value(OTG_PHY_CS_GPIO, 0);
mxc_register_device(&mxc_otg_udc_device, &otg_device_pdata);
}
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
}
......@@ -233,9 +384,9 @@ static struct sys_timer pca100_timer = {
};
MACHINE_START(PCA100, "phyCARD-i.MX27")
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = pca100_init,
......
arch/arm/mach-mx2/pcm038.c → arch/arm/mach-mx2/mach-pcm038.c
浏览文件 @ b93a4afc
......@@ -36,10 +36,12 @@
#include <mach/common.h>
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
#include <mach/spi.h>
#include <mach/mxc_ehci.h>
#include <mach/ulpi.h>
#include "devices.h"
......@@ -96,6 +98,19 @@ static int pcm038_pins[] = {
PC17_PF_SSI4_RXD,
PC18_PF_SSI4_TXD,
PC19_PF_SSI4_CLK,
/* USB host */
PA0_PF_USBH2_CLK,
PA1_PF_USBH2_DIR,
PA2_PF_USBH2_DATA7,
PA3_PF_USBH2_NXT,
PA4_PF_USBH2_STP,
PD19_AF_USBH2_DATA4,
PD20_AF_USBH2_DATA3,
PD21_AF_USBH2_DATA6,
PD22_AF_USBH2_DATA0,
PD23_AF_USBH2_DATA2,
PD24_AF_USBH2_DATA1,
PD26_AF_USBH2_DATA5,
};
/*
......@@ -108,8 +123,8 @@ static struct platdata_mtd_ram pcm038_sram_data = {
};
static struct resource pcm038_sram_resource = {
.start = CS1_BASE_ADDR,
.end = CS1_BASE_ADDR + 512 * 1024 - 1,
.start = MX27_CS1_BASE_ADDR,
.end = MX27_CS1_BASE_ADDR + 512 * 1024 - 1,
.flags = IORESOURCE_MEM,
};
......@@ -173,9 +188,7 @@ static struct platform_device *platform_devices[] __initdata = {
* setup other stuffs to access the sram. */
static void __init pcm038_init_sram(void)
{
__raw_writel(0x0000d843, CSCR_U(1));
__raw_writel(0x22252521, CSCR_L(1));
__raw_writel(0x22220a00, CSCR_A(1));
mx27_setup_weimcs(1, 0x0000d843, 0x22252521, 0x22220a00);
}
static struct imxi2c_platform_data pcm038_i2c_1_data = {
......@@ -279,6 +292,11 @@ static struct spi_board_info pcm038_spi_board_info[] __initdata = {
}
};
static struct mxc_usbh_platform_data usbh2_pdata = {
.portsc = MXC_EHCI_MODE_ULPI,
.flags = MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_DIFF_UNI,
};
static void __init pcm038_init(void)
{
mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
......@@ -291,7 +309,7 @@ static void __init pcm038_init(void)
mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
mxc_gpio_mode(PE16_AF_OWIRE);
mxc_register_device(&mxc_nand_device, &pcm038_nand_board_info);
mxc_register_device(&imx27_nand_device, &pcm038_nand_board_info);
/* only the i2c master 1 is used on this CPU card */
i2c_register_board_info(1, pcm038_i2c_devices,
......@@ -311,6 +329,8 @@ static void __init pcm038_init(void)
spi_register_board_info(pcm038_spi_board_info,
ARRAY_SIZE(pcm038_spi_board_info));
mxc_register_device(&mxc_usbh2, &usbh2_pdata);
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
......@@ -328,9 +348,9 @@ static struct sys_timer pcm038_timer = {
};
MACHINE_START(PCM038, "phyCORE-i.MX27")
.phys_io = AIPI_BASE_ADDR,
.io_pg_offst = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX27_AIPI_BASE_ADDR,
.io_pg_offst = ((MX27_AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = MX27_PHYS_OFFSET + 0x100,
.map_io = mx27_map_io,
.init_irq = mx27_init_irq,
.init_machine = pcm038_init,
......
arch/arm/mach-mx2/mm-imx21.c 0 → 100644
浏览文件 @ b93a4afc
/*
* arch/arm/mach-mx2/mm-imx21.c
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
* MA 02110-1301, USA.
*/
#include <linux/mm.h>
#include <linux/init.h>
#include <mach/hardware.h>
#include <mach/common.h>
#include <asm/pgtable.h>
#include <asm/mach/map.h>
/* MX21 memory map definition */
static struct map_desc imx21_io_desc[] __initdata = {
/*
* this fixed mapping covers:
* - AIPI1
* - AIPI2
* - AITC
* - ROM Patch
* - and some reserved space
*/
{
.virtual = MX21_AIPI_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX21_AIPI_BASE_ADDR),
.length = MX21_AIPI_SIZE,
.type = MT_DEVICE
},
/*
* this fixed mapping covers:
* - CSI
* - ATA
*/
{
.virtual = MX21_SAHB1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX21_SAHB1_BASE_ADDR),
.length = MX21_SAHB1_SIZE,
.type = MT_DEVICE
},
/*
* this fixed mapping covers:
* - EMI
*/
{
.virtual = MX21_X_MEMC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX21_X_MEMC_BASE_ADDR),
.length = MX21_X_MEMC_SIZE,
.type = MT_DEVICE
},
};
/*
* Initialize the memory map. It is called during the
* system startup to create static physical to virtual
* memory map for the IO modules.
*/
void __init mx21_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX21);
mxc_arch_reset_init(MX21_IO_ADDRESS(MX21_WDOG_BASE_ADDR));
iotable_init(imx21_io_desc, ARRAY_SIZE(imx21_io_desc));
}
void __init mx21_init_irq(void)
{
mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR));
}
arch/arm/mach-mx2/generic.c → arch/arm/mach-mx2/mm-imx27.c
浏览文件 @ b93a4afc
/*
* generic.c
* arch/arm/mach-mx2/mm-imx27.c
*
* Copyright (C) 2008 Juergen Beisert (kernel@pengutronix.de)
*
......@@ -26,7 +26,7 @@
#include <asm/mach/map.h>
/* MX27 memory map definition */
static struct map_desc mxc_io_desc[] __initdata = {
static struct map_desc imx27_io_desc[] __initdata = {
/*
* this fixed mapping covers:
* - AIPI1
......@@ -36,9 +36,9 @@ static struct map_desc mxc_io_desc[] __initdata = {
* - and some reserved space
*/
{
.virtual = AIPI_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(AIPI_BASE_ADDR),
.length = AIPI_SIZE,
.virtual = MX27_AIPI_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX27_AIPI_BASE_ADDR),
.length = MX27_AIPI_SIZE,
.type = MT_DEVICE
},
/*
......@@ -47,9 +47,9 @@ static struct map_desc mxc_io_desc[] __initdata = {
* - ATA
*/
{
.virtual = SAHB1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(SAHB1_BASE_ADDR),
.length = SAHB1_SIZE,
.virtual = MX27_SAHB1_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX27_SAHB1_BASE_ADDR),
.length = MX27_SAHB1_SIZE,
.type = MT_DEVICE
},
/*
......@@ -57,11 +57,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
* - EMI
*/
{
.virtual = X_MEMC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(X_MEMC_BASE_ADDR),
.length = X_MEMC_SIZE,
.virtual = MX27_X_MEMC_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX27_X_MEMC_BASE_ADDR),
.length = MX27_X_MEMC_SIZE,
.type = MT_DEVICE
}
},
};
/*
......@@ -69,29 +69,15 @@ static struct map_desc mxc_io_desc[] __initdata = {
* system startup to create static physical to virtual
* memory map for the IO modules.
*/
void __init mx21_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX21);
mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
void __init mx27_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX27);
mxc_arch_reset_init(IO_ADDRESS(WDOG_BASE_ADDR));
mxc_arch_reset_init(MX27_IO_ADDRESS(MX27_WDOG_BASE_ADDR));
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
iotable_init(imx27_io_desc, ARRAY_SIZE(imx27_io_desc));
}
void __init mx27_init_irq(void)
{
mxc_init_irq(IO_ADDRESS(AVIC_BASE_ADDR));
mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR));
}
void __init mx21_init_irq(void)
{
mx27_init_irq();
}
arch/arm/mach-mx2/pcm970-baseboard.c
浏览文件 @ b93a4afc
......@@ -24,7 +24,7 @@
#include <asm/mach/arch.h>
#include <mach/common.h>
#include <mach/iomux.h>
#include <mach/iomux-mx27.h>
#include <mach/imxfb.h>
#include <mach/hardware.h>
#include <mach/mmc.h>
......@@ -190,8 +190,8 @@ static struct imx_fb_platform_data pcm038_fb_data = {
static struct resource pcm970_sja1000_resources[] = {
{
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0x100 - 1,
.start = MX27_CS4_BASE_ADDR,
.end = MX27_CS4_BASE_ADDR + 0x100 - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IRQ_GPIOE(19),
......
arch/arm/mach-mx2/serial.c
浏览文件 @ b93a4afc
......@@ -26,12 +26,12 @@
static struct resource uart0[] = {
{
.start = UART1_BASE_ADDR,
.end = UART1_BASE_ADDR + 0x0B5,
.start = MX2x_UART1_BASE_ADDR,
.end = MX2x_UART1_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART1,
.end = MXC_INT_UART1,
.start = MX2x_INT_UART1,
.end = MX2x_INT_UART1,
.flags = IORESOURCE_IRQ,
},
};
......@@ -45,12 +45,12 @@ struct platform_device mxc_uart_device0 = {
static struct resource uart1[] = {
{
.start = UART2_BASE_ADDR,
.end = UART2_BASE_ADDR + 0x0B5,
.start = MX2x_UART2_BASE_ADDR,
.end = MX2x_UART2_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART2,
.end = MXC_INT_UART2,
.start = MX2x_INT_UART2,
.end = MX2x_INT_UART2,
.flags = IORESOURCE_IRQ,
},
};
......@@ -64,12 +64,12 @@ struct platform_device mxc_uart_device1 = {
static struct resource uart2[] = {
{
.start = UART3_BASE_ADDR,
.end = UART3_BASE_ADDR + 0x0B5,
.start = MX2x_UART3_BASE_ADDR,
.end = MX2x_UART3_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART3,
.end = MXC_INT_UART3,
.start = MX2x_INT_UART3,
.end = MX2x_INT_UART3,
.flags = IORESOURCE_IRQ,
},
};
......@@ -83,12 +83,12 @@ struct platform_device mxc_uart_device2 = {
static struct resource uart3[] = {
{
.start = UART4_BASE_ADDR,
.end = UART4_BASE_ADDR + 0x0B5,
.start = MX2x_UART4_BASE_ADDR,
.end = MX2x_UART4_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART4,
.end = MXC_INT_UART4,
.start = MX2x_INT_UART4,
.end = MX2x_INT_UART4,
.flags = IORESOURCE_IRQ,
},
};
......@@ -103,12 +103,12 @@ struct platform_device mxc_uart_device3 = {
#ifdef CONFIG_MACH_MX27
static struct resource uart4[] = {
{
.start = UART5_BASE_ADDR,
.end = UART5_BASE_ADDR + 0x0B5,
.start = MX27_UART5_BASE_ADDR,
.end = MX27_UART5_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART5,
.end = MXC_INT_UART5,
.start = MX27_INT_UART5,
.end = MX27_INT_UART5,
.flags = IORESOURCE_IRQ,
},
};
......@@ -122,12 +122,12 @@ struct platform_device mxc_uart_device4 = {
static struct resource uart5[] = {
{
.start = UART6_BASE_ADDR,
.end = UART6_BASE_ADDR + 0x0B5,
.start = MX27_UART6_BASE_ADDR,
.end = MX27_UART6_BASE_ADDR + 0x0B5,
.flags = IORESOURCE_MEM,
}, {
.start = MXC_INT_UART6,
.end = MXC_INT_UART6,
.start = MX27_INT_UART6,
.end = MX27_INT_UART6,
.flags = IORESOURCE_IRQ,
},
};
......
arch/arm/mach-mx25/Kconfig
浏览文件 @ b93a4afc
......@@ -3,7 +3,6 @@ if ARCH_MX25
comment "MX25 platforms:"
config MACH_MX25_3DS
select ARCH_MXC_IOMUX_V3
bool "Support MX25PDK (3DS) Platform"
endif
arch/arm/mach-mx25/Makefile
浏览文件 @ b93a4afc
obj-y := mm.o devices.o
obj-$(CONFIG_ARCH_MX25) += clock.o
obj-$(CONFIG_MACH_MX25_3DS) += mx25pdk.o
obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25pdk.o
arch/arm/mach-mx25/clock.c
浏览文件 @ b93a4afc
......@@ -124,6 +124,11 @@ static unsigned long get_rate_gpt(struct clk *clk)
return get_rate_per(5);
}
static unsigned long get_rate_lcdc(struct clk *clk)
{
return get_rate_per(7);
}
static unsigned long get_rate_otg(struct clk *clk)
{
return 48000000; /* FIXME */
......@@ -167,6 +172,8 @@ DEFINE_CLOCK(cspi1_clk, 0, CCM_CGCR1, 5, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(cspi2_clk, 0, CCM_CGCR1, 6, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(cspi3_clk, 0, CCM_CGCR1, 7, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL, NULL, NULL);
DEFINE_CLOCK(lcdc_ahb_clk, 0, CCM_CGCR0, 24, NULL, NULL, NULL);
DEFINE_CLOCK(lcdc_per_clk, 0, CCM_CGCR0, 7, NULL, NULL, &lcdc_ahb_clk);
DEFINE_CLOCK(uart1_clk, 0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart2_clk, 0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
DEFINE_CLOCK(uart3_clk, 0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
......@@ -182,6 +189,8 @@ DEFINE_CLOCK(kpp_clk, 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(tsc_clk, 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(i2c_clk, 0, CCM_CGCR0, 6, get_rate_i2c, NULL, NULL);
DEFINE_CLOCK(fec_clk, 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
DEFINE_CLOCK(dryice_clk, 0, CCM_CGCR1, 8, get_rate_ipg, NULL, NULL);
DEFINE_CLOCK(lcdc_clk, 0, CCM_CGCR1, 29, get_rate_lcdc, NULL, &lcdc_per_clk);
#define _REGISTER_CLOCK(d, n, c) \
{ \
......@@ -214,6 +223,8 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
_REGISTER_CLOCK("fec.0", NULL, fec_clk)
_REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
};
int __init mx25_clocks_init(void)
......@@ -231,6 +242,9 @@ int __init mx25_clocks_init(void)
__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
/* Clock source for lcdc is upll */
__raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7), CRM_BASE + 0x64);
mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
......
arch/arm/mach-mx25/devices.c
浏览文件 @ b93a4afc
......@@ -438,3 +438,65 @@ struct platform_device mx25_fec_device = {
.num_resources = ARRAY_SIZE(mx25_fec_resources),
.resource = mx25_fec_resources,
};
static struct resource mxc_nand_resources[] = {
{
.start = MX25_NFC_BASE_ADDR,
.end = MX25_NFC_BASE_ADDR + 0x1fff,
.flags = IORESOURCE_MEM,
},
{
.start = MX25_INT_NANDFC,
.end = MX25_INT_NANDFC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mxc_nand_device = {
.name = "mxc_nand",
.id = 0,
.num_resources = ARRAY_SIZE(mxc_nand_resources),
.resource = mxc_nand_resources,
};
static struct resource mx25_rtc_resources[] = {
{
.start = MX25_DRYICE_BASE_ADDR,
.end = MX25_DRYICE_BASE_ADDR + 0x40,
.flags = IORESOURCE_MEM,
},
{
.start = MX25_INT_DRYICE,
.flags = IORESOURCE_IRQ
},
};
struct platform_device mx25_rtc_device = {
.name = "imxdi_rtc",
.id = 0,
.num_resources = ARRAY_SIZE(mx25_rtc_resources),
.resource = mx25_rtc_resources,
};
static struct resource mx25_fb_resources[] = {
{
.start = MX25_LCDC_BASE_ADDR,
.end = MX25_LCDC_BASE_ADDR + 0xfff,
.flags = IORESOURCE_MEM,
},
{
.start = MX25_INT_LCDC,
.end = MX25_INT_LCDC,
.flags = IORESOURCE_IRQ,
},
};
struct platform_device mx25_fb_device = {
.name = "imx-fb",
.id = 0,
.resource = mx25_fb_resources,
.num_resources = ARRAY_SIZE(mx25_fb_resources),
.dev = {
.coherent_dma_mask = 0xFFFFFFFF,
},
};
arch/arm/mach-mx25/devices.h
浏览文件 @ b93a4afc
......@@ -18,3 +18,6 @@ extern struct platform_device mxc_i2c_device0;
extern struct platform_device mxc_i2c_device1;
extern struct platform_device mxc_i2c_device2;
extern struct platform_device mx25_fec_device;
extern struct platform_device mxc_nand_device;
extern struct platform_device mx25_rtc_device;
extern struct platform_device mx25_fb_device;
arch/arm/mach-mx25/mx25pdk.c → arch/arm/mach-mx25/mach-mx25pdk.c
浏览文件 @ b93a4afc
......@@ -35,8 +35,9 @@
#include <mach/imx-uart.h>
#include <mach/mx25.h>
#include <mach/mxc_nand.h>
#include <mach/imxfb.h>
#include "devices.h"
#include <mach/iomux.h>
#include <mach/iomux-mx25.h>
static struct imxuart_platform_data uart_pdata = {
.flags = IMXUART_HAVE_RTSCTS,
......@@ -54,6 +55,31 @@ static struct pad_desc mx25pdk_pads[] = {
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
/* LCD */
MX25_PAD_LD0__LD0,
MX25_PAD_LD1__LD1,
MX25_PAD_LD2__LD2,
MX25_PAD_LD3__LD3,
MX25_PAD_LD4__LD4,
MX25_PAD_LD5__LD5,
MX25_PAD_LD6__LD6,
MX25_PAD_LD7__LD7,
MX25_PAD_LD8__LD8,
MX25_PAD_LD9__LD9,
MX25_PAD_LD10__LD10,
MX25_PAD_LD11__LD11,
MX25_PAD_LD12__LD12,
MX25_PAD_LD13__LD13,
MX25_PAD_LD14__LD14,
MX25_PAD_LD15__LD15,
MX25_PAD_GPIO_E__LD16,
MX25_PAD_GPIO_F__LD17,
MX25_PAD_HSYNC__HSYNC,
MX25_PAD_VSYNC__VSYNC,
MX25_PAD_LSCLK__LSCLK,
MX25_PAD_OE_ACD__OE_ACD,
MX25_PAD_CONTRAST__CONTRAST,
};
static struct fec_platform_data mx25_fec_pdata = {
......@@ -77,6 +103,40 @@ static void __init mx25pdk_fec_reset(void)
gpio_set_value(FEC_RESET_B_GPIO, 1);
}
static struct mxc_nand_platform_data mx25pdk_nand_board_info = {
.width = 1,
.hw_ecc = 1,
.flash_bbt = 1,
};
static struct imx_fb_videomode mx25pdk_modes[] = {
{
.mode = {
.name = "CRT-VGA",
.refresh = 60,
.xres = 640,
.yres = 480,
.pixclock = 39683,
.left_margin = 45,
.right_margin = 114,
.upper_margin = 33,
.lower_margin = 11,
.hsync_len = 1,
.vsync_len = 1,
},
.bpp = 16,
.pcr = 0xFA208B80,
},
};
static struct imx_fb_platform_data mx25pdk_fb_pdata = {
.mode = mx25pdk_modes,
.num_modes = ARRAY_SIZE(mx25pdk_modes),
.pwmr = 0x00A903FF,
.lscr1 = 0x00120300,
.dmacr = 0x00020010,
};
static void __init mx25pdk_init(void)
{
mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
......@@ -84,6 +144,9 @@ static void __init mx25pdk_init(void)
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
mxc_register_device(&mxc_nand_device, &mx25pdk_nand_board_info);
mxc_register_device(&mx25_rtc_device, NULL);
mxc_register_device(&mx25_fb_device, &mx25pdk_fb_pdata);
mx25pdk_fec_reset();
mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
......@@ -102,7 +165,7 @@ MACHINE_START(MX25_3DS, "Freescale MX25PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = MX25_AIPS1_BASE_ADDR,
.io_pg_offst = ((MX25_AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.boot_params = MX25_PHYS_OFFSET + 0x100,
.map_io = mx25_map_io,
.init_irq = mx25_init_irq,
.init_machine = mx25pdk_init,
......
arch/arm/mach-mx3/Kconfig
浏览文件 @ b93a4afc
......@@ -34,6 +34,7 @@ config MACH_MX31ADS_WM1133_EV1
config MACH_PCM037
bool "Support Phytec pcm037 (i.MX31) platforms"
select ARCH_MX31
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm037 platform. This includes
specific configurations for the board and its peripherals.
......@@ -86,6 +87,7 @@ config MACH_QONG
config MACH_PCM043
bool "Support Phytec pcm043 (i.MX35) platforms"
select ARCH_MX35
select MXC_ULPI if USB_ULPI
help
Include support for Phytec pcm043 platform. This includes
specific configurations for the board and its peripherals.
......
arch/arm/mach-mx3/Makefile
浏览文件 @ b93a4afc
......@@ -5,18 +5,22 @@
# Object file lists.
obj-y := mm.o devices.o cpu.o
obj-$(CONFIG_ARCH_MX31) += clock.o iomux.o
CFLAGS_mm.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
CFLAGS_devices.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
CFLAGS_cpu.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_ARCH_MX31) += clock-imx31.o iomux-imx31.o
obj-$(CONFIG_ARCH_MX35) += clock-imx35.o
obj-$(CONFIG_MACH_MX31ADS) += mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mx31pdk.o
obj-$(CONFIG_MACH_MX31MOBOARD) += mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o
obj-$(CONFIG_MACH_QONG) += qong.o
obj-$(CONFIG_MACH_PCM043) += pcm043.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
obj-$(CONFIG_MACH_MX35_3DS) += mx35pdk.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += kzmarm11.o
obj-$(CONFIG_MACH_MX31ADS) += mach-mx31ads.o
obj-$(CONFIG_MACH_MX31LILLY) += mach-mx31lilly.o mx31lilly-db.o
obj-$(CONFIG_MACH_MX31LITE) += mach-mx31lite.o mx31lite-db.o
obj-$(CONFIG_MACH_PCM037) += mach-pcm037.o
obj-$(CONFIG_MACH_PCM037_EET) += mach-pcm037_eet.o
obj-$(CONFIG_MACH_MX31_3DS) += mach-mx31_3ds.o
CFLAGS_mach-mx31_3ds.o = -DIMX_NEEDS_DEPRECATED_SYMBOLS
obj-$(CONFIG_MACH_MX31MOBOARD) += mach-mx31moboard.o mx31moboard-devboard.o \
mx31moboard-marxbot.o mx31moboard-smartbot.o
obj-$(CONFIG_MACH_QONG) += mach-qong.o
obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o
obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o
obj-$(CONFIG_MACH_MX35_3DS) += mach-mx35pdk.o
obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o
arch/arm/mach-mx3/clock.c → arch/arm/mach-mx3/clock-imx31.c
浏览文件 @ b93a4afc
......@@ -618,14 +618,15 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_read_cpu_rev();
if (mx31_revision() >= CHIP_REV_2_0) {
if (mx31_revision() >= MX31_CHIP_REV_2_0) {
reg = __raw_readl(MXC_CCM_PMCR1);
/* No PLL restart on DVFS switch; enable auto EMI handshake */
reg |= MXC_CCM_PMCR1_PLLRDIS | MXC_CCM_PMCR1_EMIRQ_EN;
__raw_writel(reg, MXC_CCM_PMCR1);
}
mxc_timer_init(&ipg_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
mxc_timer_init(&ipg_clk, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
MX31_INT_GPT);
return 0;
}
......
arch/arm/mach-mx3/clock-imx35.c
浏览文件 @ b93a4afc
......@@ -28,7 +28,7 @@
#include <mach/hardware.h>
#include <mach/common.h>
#define CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
#define CCM_BASE MX35_IO_ADDRESS(MX35_CCM_BASE_ADDR)
#define CCM_CCMR 0x00
#define CCM_PDR0 0x04
......@@ -504,7 +504,8 @@ int __init mx35_clocks_init()
__raw_writel((3 << 26) | ll, CCM_BASE + CCM_CGR2);
__raw_writel(0, CCM_BASE + CCM_CGR3);
mxc_timer_init(&gpt_clk, IO_ADDRESS(GPT1_BASE_ADDR), MXC_INT_GPT);
mxc_timer_init(&gpt_clk,
MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
return 0;
}
......
arch/arm/mach-mx3/cpu.c
浏览文件 @ b93a4afc
......@@ -41,7 +41,7 @@ void __init mx31_read_cpu_rev(void)
u32 i, srev;
/* read SREV register from IIM module */
srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR + MXC_IIMSREV));
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev) {
......
arch/arm/mach-mx3/crm_regs.h
浏览文件 @ b93a4afc
......@@ -24,7 +24,7 @@
#define CKIH_CLK_FREQ_27MHZ 27000000
#define CKIL_CLK_FREQ 32768
#define MXC_CCM_BASE IO_ADDRESS(CCM_BASE_ADDR)
#define MXC_CCM_BASE MX31_IO_ADDRESS(MX31_CCM_BASE_ADDR)
/* Register addresses */
#define MXC_CCM_CCMR (MXC_CCM_BASE + 0x00)
......
arch/arm/mach-mx3/iomux.c → arch/arm/mach-mx3/iomux-imx31.c
浏览文件 @ b93a4afc
......@@ -29,7 +29,7 @@
/*
* IOMUX register (base) addresses
*/
#define IOMUX_BASE IO_ADDRESS(IOMUXC_BASE_ADDR)
#define IOMUX_BASE MX31_IO_ADDRESS(MX31_IOMUXC_BASE_ADDR)
#define IOMUXINT_OBS1 (IOMUX_BASE + 0x000)
#define IOMUXINT_OBS2 (IOMUX_BASE + 0x004)
#define IOMUXGPR (IOMUX_BASE + 0x008)
......
arch/arm/mach-mx3/armadillo5x0.c → arch/arm/mach-mx3/mach-armadillo5x0.c
浏览文件 @ b93a4afc
......@@ -182,8 +182,8 @@ static struct physmap_flash_data armadillo5x0_nor_flash_pdata = {
static struct resource armadillo5x0_nor_flash_resource = {
.flags = IORESOURCE_MEM,
.start = CS0_BASE_ADDR,
.end = CS0_BASE_ADDR + SZ_64M - 1,
.start = MX31_CS0_BASE_ADDR,
.end = MX31_CS0_BASE_ADDR + SZ_64M - 1,
};
static struct platform_device armadillo5x0_nor_flash = {
......@@ -311,8 +311,8 @@ static struct imxmmc_platform_data sdhc_pdata = {
*/
static struct resource armadillo5x0_smc911x_resources[] = {
{
.start = CS3_BASE_ADDR,
.end = CS3_BASE_ADDR + SZ_32M - 1,
.start = MX31_CS3_BASE_ADDR,
.end = MX31_CS3_BASE_ADDR + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0),
......@@ -406,9 +406,9 @@ static struct sys_timer armadillo5x0_timer = {
MACHINE_START(ARMADILLO5X0, "Armadillo-500")
/* Maintainer: Alberto Panizzo */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x00000100,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.timer = &armadillo5x0_timer,
......
arch/arm/mach-mx3/kzmarm11.c → arch/arm/mach-mx3/mach-kzm_arm11_01.c
浏览文件 @ b93a4afc
......@@ -46,13 +46,18 @@
#include "devices.h"
#define KZM_ARM11_IO_ADDRESS(x) ( \
IMX_IO_ADDRESS(x, MX31_CS4) ?: \
IMX_IO_ADDRESS(x, MX31_CS5) ?: \
MX31_IO_ADDRESS(x))
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
/*
* KZM-ARM11-01 has an external UART on FPGA
*/
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = IO_ADDRESS(KZM_ARM11_16550),
.membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550),
.mapbase = KZM_ARM11_16550,
.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
.irqflags = IRQ_TYPE_EDGE_RISING,
......@@ -102,9 +107,9 @@ static int __init kzm_init_ext_uart(void)
/*
* Unmask UART interrupt
*/
tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
tmp = __raw_readb(KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
tmp |= 0x2;
__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
__raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1));
return platform_device_register(&serial_device);
}
......@@ -128,8 +133,8 @@ static struct smsc911x_platform_config kzm_smsc9118_config = {
static struct resource kzm_smsc9118_resources[] = {
{
.start = CS5_BASE_ADDR,
.end = CS5_BASE_ADDR + SZ_128K - 1,
.start = MX31_CS5_BASE_ADDR,
.end = MX31_CS5_BASE_ADDR + SZ_128K - 1,
.flags = IORESOURCE_MEM,
},
{
......@@ -222,15 +227,15 @@ static void __init kzm_board_init(void)
*/
static struct map_desc kzm_io_desc[] __initdata = {
{
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
},
{
.virtual = CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS5_BASE_ADDR),
.length = CS5_SIZE,
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
.length = MX31_CS5_SIZE,
.type = MT_DEVICE
},
};
......@@ -258,9 +263,9 @@ static struct sys_timer kzm_timer = {
* initialize __mach_desc_KZM_ARM11_01 data structure.
*/
MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = kzm_map_io,
.init_irq = mx31_init_irq,
.init_machine = kzm_board_init,
......
arch/arm/mach-mx3/mx31pdk.c → arch/arm/mach-mx3/mach-mx31_3ds.c
浏览文件 @ b93a4afc
......@@ -211,9 +211,9 @@ static int __init mx31pdk_init_expio(void)
*/
static struct map_desc mx31pdk_io_desc[] __initdata = {
{
.virtual = CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS5_BASE_ADDR),
.length = CS5_SIZE,
.virtual = MX31_CS5_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR),
.length = MX31_CS5_SIZE,
.type = MT_DEVICE,
},
};
......@@ -256,9 +256,9 @@ static struct sys_timer mx31pdk_timer = {
*/
MACHINE_START(MX31_3DS, "Freescale MX31PDK (3DS)")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31pdk_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mx31ads.c → arch/arm/mach-mx3/mach-mx31ads.c
浏览文件 @ b93a4afc
......@@ -60,7 +60,7 @@
static struct plat_serial8250_port serial_platform_data[] = {
{
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA),
.irq = EXPIO_INT_XUART_INTA,
.uartclk = 14745600,
.regshift = 0,
......@@ -68,7 +68,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_AUTO_IRQ,
}, {
.membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB),
.irq = EXPIO_INT_XUART_INTB,
.uartclk = 14745600,
.regshift = 0,
......@@ -309,12 +309,8 @@ static struct regulator_init_data ldo1_data = {
};
static struct regulator_consumer_supply ldo2_consumers[] = {
{
.supply = "AVDD",
},
{
.supply = "HPVDD",
},
{ .supply = "AVDD", .dev_name = "1-001a" },
{ .supply = "HPVDD", .dev_name = "1-001a" },
};
/* CODEC and SIM */
......@@ -385,8 +381,6 @@ static struct wm8350_audio_platform_data imx32ads_wm8350_setup = {
static int mx31_wm8350_init(struct wm8350 *wm8350)
{
int i;
wm8350_gpio_config(wm8350, 0, WM8350_GPIO_DIR_IN,
WM8350_GPIO0_PWR_ON_IN, WM8350_GPIO_ACTIVE_LOW,
WM8350_GPIO_PULL_UP, WM8350_GPIO_INVERT_OFF,
......@@ -422,10 +416,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
WM8350_GPIO_PULL_NONE, WM8350_GPIO_INVERT_OFF,
WM8350_GPIO_DEBOUNCE_OFF);
/* Fix up for our own supplies. */
for (i = 0; i < ARRAY_SIZE(ldo2_consumers); i++)
ldo2_consumers[i].dev = wm8350->dev;
wm8350_register_regulator(wm8350, WM8350_DCDC_1, &sw1a_data);
wm8350_register_regulator(wm8350, WM8350_DCDC_3, &viohi_data);
wm8350_register_regulator(wm8350, WM8350_DCDC_4, &violo_data);
......@@ -493,14 +483,27 @@ static void mxc_init_i2c(void)
}
#endif
static unsigned int ssi_pins[] = {
MX31_PIN_SFS5__SFS5,
MX31_PIN_SCK5__SCK5,
MX31_PIN_SRXD5__SRXD5,
MX31_PIN_STXD5__STXD5,
};
static void mxc_init_audio(void)
{
mxc_register_device(&imx_ssi_device0, NULL);
mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi");
}
/*!
* This structure defines static mappings for the i.MX31ADS board.
*/
static struct map_desc mx31ads_io_desc[] __initdata = {
{
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE / 2,
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE / 2,
.type = MT_DEVICE
},
};
......@@ -528,6 +531,7 @@ static void __init mxc_board_init(void)
mxc_init_extuart();
mxc_init_imx_uart();
mxc_init_i2c();
mxc_init_audio();
}
static void __init mx31ads_timer_init(void)
......@@ -545,9 +549,9 @@ static struct sys_timer mx31ads_timer = {
*/
MACHINE_START(MX31ADS, "Freescale MX31ADS")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31ads_map_io,
.init_irq = mx31ads_init_irq,
.init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mx31lilly.c → arch/arm/mach-mx3/mach-mx31lilly.c
浏览文件 @ b93a4afc
......@@ -57,8 +57,8 @@
static struct resource smsc91x_resources[] = {
{
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0xffff,
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 0xffff,
.flags = IORESOURCE_MEM,
},
{
......@@ -195,9 +195,9 @@ static struct sys_timer mx31lilly_timer = {
};
MACHINE_START(LILLY1131, "INCO startec LILLY-1131")
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31_map_io,
.init_irq = mx31_init_irq,
.init_machine = mx31lilly_board_init,
......
arch/arm/mach-mx3/mx31lite.c → arch/arm/mach-mx3/mach-mx31lite.c
浏览文件 @ b93a4afc
......@@ -82,8 +82,8 @@ static struct smsc911x_platform_config smsc911x_config = {
static struct resource smsc911x_resources[] = {
{
.start = CS4_BASE_ADDR,
.end = CS4_BASE_ADDR + 0x100,
.start = MX31_CS4_BASE_ADDR,
.end = MX31_CS4_BASE_ADDR + 0x100,
.flags = IORESOURCE_MEM,
}, {
.start = IOMUX_TO_IRQ(MX31_PIN_SFS6),
......@@ -214,9 +214,9 @@ static struct platform_device physmap_flash_device = {
*/
static struct map_desc mx31lite_io_desc[] __initdata = {
{
.virtual = CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(CS4_BASE_ADDR),
.length = CS4_SIZE,
.virtual = MX31_CS4_BASE_ADDR_VIRT,
.pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR),
.length = MX31_CS4_SIZE,
.type = MT_DEVICE
}
};
......@@ -287,9 +287,9 @@ struct sys_timer mx31lite_timer = {
MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
/* Maintainer: Freescale Semiconductor, Inc. */
.phys_io = AIPS1_BASE_ADDR,
.io_pg_offst = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
.boot_params = PHYS_OFFSET + 0x100,
.phys_io = MX31_AIPS1_BASE_ADDR,
.io_pg_offst = (MX31_AIPS1_BASE_ADDR_VIRT >> 18) & 0xfffc,
.boot_params = MX3x_PHYS_OFFSET + 0x100,
.map_io = mx31lite_map_io,
.init_irq = mx31_init_irq,
.init_machine = mxc_board_init,
......
arch/arm/mach-mx3/mx31lite-db.c
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx3/mx31moboard-smartbot.c 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/Kconfig 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/Makefile 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/Makefile.boot 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/board-mx51_babbage.c 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/clock-mx51.c 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/cpu.c 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/crm_regs.h 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/devices.c 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/devices.h 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mx5/mm.c 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/mach-mxc91231/magx-zn5.c
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/Kconfig
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/Makefile
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/audmux-v1.c
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/audmux-v2.c
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/clock.c
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/dma-mx1-mx2.c
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/ehci.c
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/gpio.c
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/include/mach/iomux-mx51.h 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/include/mach/iomux-v1.h 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/include/mach/mtd-xip.h 已删除 100644 → 0
浏览文件 @ 62c132a8
此差异已折叠。
arch/arm/plat-mxc/include/mach/mx51.h 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/include/mach/ssi.h 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/iomux-mx1-mx2.c 已删除 100644 → 0
浏览文件 @ 62c132a8
此差异已折叠。
arch/arm/plat-mxc/iomux-v1.c 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/time.c
浏览文件 @ b93a4afc
此差异已折叠。
arch/arm/plat-mxc/tzic.c 0 → 100644
浏览文件 @ b93a4afc
此差异已折叠。
drivers/mtd/nand/Kconfig
浏览文件 @ b93a4afc
此差异已折叠。
drivers/serial/imx.c
浏览文件 @ b93a4afc
此差异已折叠。
drivers/usb/gadget/fsl_mx3_udc.c
浏览文件 @ b93a4afc
此差异已折叠。
drivers/video/Kconfig
浏览文件 @ b93a4afc
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或