Merge branch 'for-tony' of...

Merge branch 'for-tony' of master.kernel.org:/pub/scm/linux/kernel/git/balbi/usb into omap-for-linus

arch/arm/mach-omap2/board-am3517evm.c

@@ -374,7 +374,7 @@ static struct omap_musb_board_data musb_board_data = {
 	.power                  = 500,
 	.set_phy_power		= am35x_musb_phy_power,
 	.clear_irq		= am35x_musb_clear_irq,
-	.set_mode		= am35x_musb_set_mode,
+	.set_mode		= am35x_set_mode,
 	.reset			= am35x_musb_reset,
 };
 

arch/arm/mach-omap2/omap_phy_internal.c

@@ -50,13 +50,16 @@ int omap4430_phy_init(struct device *dev)
 {
 	ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K);
 	if (!ctrl_base) {
-		dev_err(dev, "control module ioremap failed\n");
+		pr_err("control module ioremap failed\n");
 		return -ENOMEM;
 	}
 	/* Power down the phy */
 	__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
-	phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
 
+	if (!dev)
+		return 0;
+
+	phyclk = clk_get(dev, "ocp2scp_usb_phy_ick");
 	if (IS_ERR(phyclk)) {
 		dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n");
 		iounmap(ctrl_base);
@@ -228,7 +231,7 @@ void am35x_musb_clear_irq(void)
 	regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR);
 }
 
-void am35x_musb_set_mode(u8 musb_mode)
+void am35x_set_mode(u8 musb_mode)
 {
 	u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2);
 

arch/arm/mach-omap2/usb-musb.c

@@ -129,11 +129,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	else
 		board_data = &musb_default_board_data;
 
-	if (cpu_is_omap3517() || cpu_is_omap3505()) {
-	} else if (cpu_is_omap44xx()) {
-		usb_musb_mux_init(board_data);
-	}
-
 	/*
 	 * REVISIT: This line can be removed once all the platforms using
 	 * musb_core.c have been converted to use use clkdev.
@@ -176,10 +171,15 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)
 	dev->dma_mask = &musb_dmamask;
 	dev->coherent_dma_mask = musb_dmamask;
 	put_device(dev);
+
+	if (cpu_is_omap44xx())
+		omap4430_phy_init(dev);
 }
 
 #else
 void __init usb_musb_init(struct omap_musb_board_data *board_data)
 {
+	if (cpu_is_omap44xx())
+		omap4430_phy_init(NULL);
 }
 #endif /* CONFIG_USB_MUSB_SOC */

arch/arm/plat-omap/include/plat/usb.h

@@ -113,7 +113,7 @@ extern int omap4430_phy_suspend(struct device *dev, int suspend);
 extern void am35x_musb_reset(void);
 extern void am35x_musb_phy_power(u8 on);
 extern void am35x_musb_clear_irq(void);
-extern void am35x_musb_set_mode(u8 musb_mode);
+extern void am35x_set_mode(u8 musb_mode);
 
 /*
  * FIXME correct answer depends on hmc_mode,