Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

Documentation/ABI/testing/sysfs-devices-cache_disable

-What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
-Date:      August 2008
-KernelVersion:	2.6.27
-Contact:	mark.langsdorf@amd.com
-Description:	These files exist in every cpu's cache index directories.
-		There are currently 2 cache_disable_# files in each
-		directory.  Reading from these files on a supported
-		processor will return that cache disable index value
-		for that processor and node.  Writing to one of these
-		files will cause the specificed cache index to be disabled.
-
-		Currently, only AMD Family 10h Processors support cache index
-		disable, and only for their L3 caches.  See the BIOS and
-		Kernel Developer's Guide at
-		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
-		for formatting information and other details on the
-		cache index disable.
-Users:    joachim.deguara@amd.com

Documentation/ABI/testing/sysfs-devices-system-cpu

+What:		/sys/devices/system/cpu/
+Date:		pre-git history
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:
+		A collection of both global and individual CPU attributes
+
+		Individual CPU attributes are contained in subdirectories
+		named by the kernel's logical CPU number, e.g.:
+
+		/sys/devices/system/cpu/cpu#/
+
+What:		/sys/devices/system/cpu/sched_mc_power_savings
+		/sys/devices/system/cpu/sched_smt_power_savings
+Date:		June 2006
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Discover and adjust the kernel's multi-core scheduler support.
+
+		Possible values are:
+
+		0 - No power saving load balance (default value)
+		1 - Fill one thread/core/package first for long running threads
+		2 - Also bias task wakeups to semi-idle cpu package for power
+		    savings
+
+		sched_mc_power_savings is dependent upon SCHED_MC, which is
+		itself architecture dependent.
+
+		sched_smt_power_savings is dependent upon SCHED_SMT, which
+		is itself architecture dependent.
+
+		The two files are independent of each other. It is possible
+		that one file may be present without the other.
+
+		Introduced by git commit 5c45bf27.
+
+
+What:		/sys/devices/system/cpu/kernel_max
+		/sys/devices/system/cpu/offline
+		/sys/devices/system/cpu/online
+		/sys/devices/system/cpu/possible
+		/sys/devices/system/cpu/present
+Date:		December 2008
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	CPU topology files that describe kernel limits related to
+		hotplug. Briefly:
+
+		kernel_max: the maximum cpu index allowed by the kernel
+		configuration.
+
+		offline: cpus that are not online because they have been
+		HOTPLUGGED off or exceed the limit of cpus allowed by the
+		kernel configuration (kernel_max above).
+
+		online: cpus that are online and being scheduled.
+
+		possible: cpus that have been allocated resources and can be
+		brought online if they are present.
+
+		present: cpus that have been identified as being present in
+		the system.
+
+		See Documentation/cputopology.txt for more information.
+
+
+
+What:		/sys/devices/system/cpu/cpu#/node
+Date:		October 2009
+Contact:	Linux memory management mailing list <linux-mm@kvack.org>
+Description:	Discover NUMA node a CPU belongs to
+
+		When CONFIG_NUMA is enabled, a symbolic link that points
+		to the corresponding NUMA node directory.
+
+		For example, the following symlink is created for cpu42
+		in NUMA node 2:
+
+		/sys/devices/system/cpu/cpu42/node2 -> ../../node/node2
+
+
+What:		/sys/devices/system/cpu/cpu#/topology/core_id
+		/sys/devices/system/cpu/cpu#/topology/core_siblings
+		/sys/devices/system/cpu/cpu#/topology/core_siblings_list
+		/sys/devices/system/cpu/cpu#/topology/physical_package_id
+		/sys/devices/system/cpu/cpu#/topology/thread_siblings
+		/sys/devices/system/cpu/cpu#/topology/thread_siblings_list
+Date:		December 2008
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	CPU topology files that describe a logical CPU's relationship
+		to other cores and threads in the same physical package.
+
+		One cpu# directory is created per logical CPU in the system,
+		e.g. /sys/devices/system/cpu/cpu42/.
+
+		Briefly, the files above are:
+
+		core_id: the CPU core ID of cpu#. Typically it is the
+		hardware platform's identifier (rather than the kernel's).
+		The actual value is architecture and platform dependent.
+
+		core_siblings: internal kernel map of cpu#'s hardware threads
+		within the same physical_package_id.
+
+		core_siblings_list: human-readable list of the logical CPU
+		numbers within the same physical_package_id as cpu#.
+
+		physical_package_id: physical package id of cpu#. Typically
+		corresponds to a physical socket number, but the actual value
+		is architecture and platform dependent.
+
+		thread_siblings: internel kernel map of cpu#'s hardware
+		threads within the same core as cpu#
+
+		thread_siblings_list: human-readable list of cpu#'s hardware
+		threads within the same core as cpu#
+
+		See Documentation/cputopology.txt for more information.
+
+
+What:		/sys/devices/system/cpu/cpuidle/current_driver
+		/sys/devices/system/cpu/cpuidle/current_governer_ro
+Date:		September 2007
+Contact:	Linux kernel mailing list <linux-kernel@vger.kernel.org>
+Description:	Discover cpuidle policy and mechanism
+
+		Various CPUs today support multiple idle levels that are
+		differentiated by varying exit latencies and power
+		consumption during idle.
+
+		Idle policy (governor) is differentiated from idle mechanism
+		(driver)
+
+		current_driver: displays current idle mechanism
+
+		current_governor_ro: displays current idle policy
+
+		See files in Documentation/cpuidle/ for more information.
+
+
+What:      /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date:      August 2008
+KernelVersion:	2.6.27
+Contact:	mark.langsdorf@amd.com
+Description:	These files exist in every cpu's cache index directories.
+		There are currently 2 cache_disable_# files in each
+		directory.  Reading from these files on a supported
+		processor will return that cache disable index value
+		for that processor and node.  Writing to one of these
+		files will cause the specificed cache index to be disabled.
+
+		Currently, only AMD Family 10h Processors support cache index
+		disable, and only for their L3 caches.  See the BIOS and
+		Kernel Developer's Guide at
+		http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+		for formatting information and other details on the
+		cache index disable.
+Users:    joachim.deguara@amd.com

Documentation/cputopology.txt

 
-Export cpu topology info via sysfs. Items (attributes) are similar
+Export CPU topology info via sysfs. Items (attributes) are similar
 to /proc/cpuinfo.
 
 1) /sys/devices/system/cpu/cpuX/topology/physical_package_id:
-represent the physical package id of  cpu X;
+
+	physical package id of cpuX. Typically corresponds to a physical
+	socket number, but the actual value is architecture and platform
+	dependent.
+
 2) /sys/devices/system/cpu/cpuX/topology/core_id:
-represent the cpu core id to cpu X;
+
+	the CPU core ID of cpuX. Typically it is the hardware platform's
+	identifier (rather than the kernel's).  The actual value is
+	architecture and platform dependent.
+
 3) /sys/devices/system/cpu/cpuX/topology/thread_siblings:
-represent the thread siblings to cpu X in the same core;
+
+	internel kernel map of cpuX's hardware threads within the same
+	core as cpuX
+
 4) /sys/devices/system/cpu/cpuX/topology/core_siblings:
-represent the thread siblings to cpu X in the same physical package;
+
+	internal kernel map of cpuX's hardware threads within the same
+	physical_package_id.
 
 To implement it in an architecture-neutral way, a new source file,
 drivers/base/topology.c, is to export the 4 attributes.
@@ -32,32 +45,32 @@ not defined by include/asm-XXX/topology.h:
 3) thread_siblings: just the given CPU
 4) core_siblings: just the given CPU
 
-Additionally, cpu topology information is provided under
+Additionally, CPU topology information is provided under
 /sys/devices/system/cpu and includes these files.  The internal
 source for the output is in brackets ("[]").
 
-    kernel_max: the maximum cpu index allowed by the kernel configuration.
+    kernel_max: the maximum CPU index allowed by the kernel configuration.
 		[NR_CPUS-1]
 
-    offline:	cpus that are not online because they have been
+    offline:	CPUs that are not online because they have been
 		HOTPLUGGED off (see cpu-hotplug.txt) or exceed the limit
-		of cpus allowed by the kernel configuration (kernel_max
+		of CPUs allowed by the kernel configuration (kernel_max
 		above). [~cpu_online_mask + cpus >= NR_CPUS]
 
-    online:	cpus that are online and being scheduled [cpu_online_mask]
+    online:	CPUs that are online and being scheduled [cpu_online_mask]
 
-    possible:	cpus that have been allocated resources and can be
+    possible:	CPUs that have been allocated resources and can be
 		brought online if they are present. [cpu_possible_mask]
 
-    present:	cpus that have been identified as being present in the
+    present:	CPUs that have been identified as being present in the
 		system. [cpu_present_mask]
 
 The format for the above output is compatible with cpulist_parse()
 [see <linux/cpumask.h>].  Some examples follow.
 
-In this example, there are 64 cpus in the system but cpus 32-63 exceed
+In this example, there are 64 CPUs in the system but cpus 32-63 exceed
 the kernel max which is limited to 0..31 by the NR_CPUS config option
-being 32.  Note also that cpus 2 and 4-31 are not online but could be
+being 32.  Note also that CPUs 2 and 4-31 are not online but could be
 brought online as they are both present and possible.
 
      kernel_max: 31
@@ -67,8 +80,8 @@ brought online as they are both present and possible.
         present: 0-31
 
 In this example, the NR_CPUS config option is 128, but the kernel was
-started with possible_cpus=144.  There are 4 cpus in the system and cpu2
-was manually taken offline (and is the only cpu that can be brought
+started with possible_cpus=144.  There are 4 CPUs in the system and cpu2
+was manually taken offline (and is the only CPU that can be brought
 online.)
 
      kernel_max: 127
@@ -78,4 +91,4 @@ online.)
         present: 0-3
 
 See cpu-hotplug.txt for the possible_cpus=NUM kernel start parameter
-as well as more information on the various cpumask's.
+as well as more information on the various cpumasks.

Documentation/filesystems/ext4.txt

@@ -134,9 +134,15 @@ ro                   	Mount filesystem read only. Note that ext4 will
                      	mount options "ro,noload" can be used to prevent
 		     	writes to the filesystem.
 
+journal_checksum	Enable checksumming of the journal transactions.
+			This will allow the recovery code in e2fsck and the
+			kernel to detect corruption in the kernel.  It is a
+			compatible change and will be ignored by older kernels.
+
 journal_async_commit	Commit block can be written to disk without waiting
 			for descriptor blocks. If enabled older kernels cannot
-			mount the device.
+			mount the device. This will enable 'journal_checksum'
+			internally.
 
 journal=update		Update the ext4 file system's journal to the current
 			format.

Documentation/hwmon/sysfs-interface

@@ -353,10 +353,20 @@ power[1-*]_average		Average power use
 				Unit: microWatt
 				RO
 
-power[1-*]_average_interval	Power use averaging interval
+power[1-*]_average_interval	Power use averaging interval.  A poll
+				notification is sent to this file if the
+				hardware changes the averaging interval.
 				Unit: milliseconds
 				RW
 
+power[1-*]_average_interval_max	Maximum power use averaging interval
+				Unit: milliseconds
+				RO
+
+power[1-*]_average_interval_min	Minimum power use averaging interval
+				Unit: milliseconds
+				RO
+
 power[1-*]_average_highest	Historical average maximum power use
 				Unit: microWatt
 				RO
@@ -365,6 +375,18 @@ power[1-*]_average_lowest	Historical average minimum power use
 				Unit: microWatt
 				RO
 
+power[1-*]_average_max		A poll notification is sent to
+				power[1-*]_average when power use
+				rises above this value.
+				Unit: microWatt
+				RW
+
+power[1-*]_average_min		A poll notification is sent to
+				power[1-*]_average when power use
+				sinks below this value.
+				Unit: microWatt
+				RW
+
 power[1-*]_input		Instantaneous power use
 				Unit: microWatt
 				RO
@@ -381,6 +403,39 @@ power[1-*]_reset_history	Reset input_highest, input_lowest,
 				average_highest and average_lowest.
 				WO
 
+power[1-*]_accuracy		Accuracy of the power meter.
+				Unit: Percent
+				RO
+
+power[1-*]_alarm		1 if the system is drawing more power than the
+				cap allows; 0 otherwise.  A poll notification is
+				sent to this file when the power use exceeds the
+				cap.  This file only appears if the cap is known
+				to be enforced by hardware.
+				RO
+
+power[1-*]_cap			If power use rises above this limit, the
+				system should take action to reduce power use.
+				A poll notification is sent to this file if the
+				cap is changed by the hardware.  The *_cap
+				files only appear if the cap is known to be
+				enforced by hardware.
+				Unit: microWatt
+				RW
+
+power[1-*]_cap_hyst		Margin of hysteresis built around capping and
+				notification.
+				Unit: microWatt
+				RW
+
+power[1-*]_cap_max		Maximum cap that can be set.
+				Unit: microWatt
+				RO
+
+power[1-*]_cap_min		Minimum cap that can be set.
+				Unit: microWatt
+				RO
+
 **********
 * Energy *
 **********

Documentation/sound/alsa/ALSA-Configuration.txt

@@ -522,7 +522,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
     pcm_devs       - Number of PCM devices assigned to each card
                      (default = 1, up to 4)
     pcm_substreams - Number of PCM substreams assigned to each PCM
-                     (default = 8, up to 16)
+                     (default = 8, up to 128)
     hrtimer        - Use hrtimer (=1, default) or system timer (=0)
     fake_buffer    - Fake buffer allocations (default = 1)
 

Documentation/trace/ftrace.txt

@@ -1231,6 +1231,7 @@ something like this simple program:
 #include <sys/stat.h>
 #include <fcntl.h>
 #include <unistd.h>
+#include <string.h>
 
 #define _STR(x) #x
 #define STR(x) _STR(x)
@@ -1265,6 +1266,7 @@ const char *find_debugfs(void)
                return NULL;
        }
 
+       strcat(debugfs, "/tracing/");
        debugfs_found = 1;
 
        return debugfs;

Documentation/vm/hwpoison.txt

+What is hwpoison?
+
+Upcoming Intel CPUs have support for recovering from some memory errors
+(``MCA recovery''). This requires the OS to declare a page "poisoned",
+kill the processes associated with it and avoid using it in the future.
+
+This patchkit implements the necessary infrastructure in the VM.
+
+To quote the overview comment:
+
+ * High level machine check handler. Handles pages reported by the
+ * hardware as being corrupted usually due to a 2bit ECC memory or cache
+ * failure.
+ *
+ * This focusses on pages detected as corrupted in the background.
+ * When the current CPU tries to consume corruption the currently
+ * running process can just be killed directly instead. This implies
+ * that if the error cannot be handled for some reason it's safe to
+ * just ignore it because no corruption has been consumed yet. Instead
+ * when that happens another machine check will happen.
+ *
+ * Handles page cache pages in various states. The tricky part
+ * here is that we can access any page asynchronous to other VM
+ * users, because memory failures could happen anytime and anywhere,
+ * possibly violating some of their assumptions. This is why this code
+ * has to be extremely careful. Generally it tries to use normal locking
+ * rules, as in get the standard locks, even if that means the
+ * error handling takes potentially a long time.
+ *
+ * Some of the operations here are somewhat inefficient and have non
+ * linear algorithmic complexity, because the data structures have not
+ * been optimized for this case. This is in particular the case
+ * for the mapping from a vma to a process. Since this case is expected
+ * to be rare we hope we can get away with this.
+
+The code consists of a the high level handler in mm/memory-failure.c,
+a new page poison bit and various checks in the VM to handle poisoned
+pages.
+
+The main target right now is KVM guests, but it works for all kinds
+of applications. KVM support requires a recent qemu-kvm release.
+
+For the KVM use there was need for a new signal type so that
+KVM can inject the machine check into the guest with the proper
+address. This in theory allows other applications to handle
+memory failures too. The expection is that near all applications
+won't do that, but some very specialized ones might.
+
+---
+
+There are two (actually three) modi memory failure recovery can be in:
+
+vm.memory_failure_recovery sysctl set to zero:
+	All memory failures cause a panic. Do not attempt recovery.
+	(on x86 this can be also affected by the tolerant level of the
+	MCE subsystem)
+
+early kill
+	(can be controlled globally and per process)
+	Send SIGBUS to the application as soon as the error is detected
+	This allows applications who can process memory errors in a gentle
+	way (e.g. drop affected object)
+	This is the mode used by KVM qemu.
+
+late kill
+	Send SIGBUS when the application runs into the corrupted page.
+	This is best for memory error unaware applications and default
+	Note some pages are always handled as late kill.
+
+---
+
+User control:
+
+vm.memory_failure_recovery
+	See sysctl.txt
+
+vm.memory_failure_early_kill
+	Enable early kill mode globally
+
+PR_MCE_KILL
+	Set early/late kill mode/revert to system default
+	arg1: PR_MCE_KILL_CLEAR: Revert to system default
+	arg1: PR_MCE_KILL_SET: arg2 defines thread specific mode
+		PR_MCE_KILL_EARLY: Early kill
+		PR_MCE_KILL_LATE:  Late kill
+		PR_MCE_KILL_DEFAULT: Use system global default
+PR_MCE_KILL_GET
+	return current mode
+
+
+---
+
+Testing:
+
+madvise(MADV_POISON, ....)
+	(as root)
+	Poison a page in the process for testing
+
+
+hwpoison-inject module through debugfs
+	/sys/debug/hwpoison/corrupt-pfn
+
+Inject hwpoison fault at PFN echoed into this file
+
+
+Architecture specific MCE injector
+
+x86 has mce-inject, mce-test
+
+Some portable hwpoison test programs in mce-test, see blow.
+
+---
+
+References:
+
+http://halobates.de/mce-lc09-2.pdf
+	Overview presentation from LinuxCon 09
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-test.git
+	Test suite (hwpoison specific portable tests in tsrc)
+
+git://git.kernel.org/pub/scm/utils/cpu/mce/mce-inject.git
+	x86 specific injector
+
+
+---
+
+Limitations:
+
+- Not all page types are supported and never will. Most kernel internal
+objects cannot be recovered, only LRU pages for now.
+- Right now hugepage support is missing.
+
+---
+Andi Kleen, Oct 2009
+

MAINTAINERS

@@ -65,43 +65,51 @@ trivial patch so apply some common sense.
 
 8.	Happy hacking.
 
-		-----------------------------------
-
-Maintainers List (try to look for most precise areas first)
+Descriptions of section entries:
+
+	P: Person (obsolete)
+	M: Mail patches to: FullName <address@domain>
+	L: Mailing list that is relevant to this area
+	W: Web-page with status/info
+	T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
+	S: Status, one of the following:
+	   Supported:	Someone is actually paid to look after this.
+	   Maintained:	Someone actually looks after it.
+	   Odd Fixes:	It has a maintainer but they don't have time to do
+			much other than throw the odd patch in. See below..
+	   Orphan:	No current maintainer [but maybe you could take the
+			role as you write your new code].
+	   Obsolete:	Old code. Something tagged obsolete generally means
+			it has been replaced by a better system and you
+			should be using that.
+	F: Files and directories with wildcard patterns.
+	   A trailing slash includes all files and subdirectory files.
+	   F:	drivers/net/	all files in and below drivers/net
+	   F:	drivers/net/*	all files in drivers/net, but not below
+	   F:	*/net/*		all files in "any top level directory"/net
+	   One pattern per line.  Multiple F: lines acceptable.
+	X: Files and directories that are NOT maintained, same rules as F:
+	   Files exclusions are tested before file matches.
+	   Can be useful for excluding a specific subdirectory, for instance:
+	   F:	net/
+	   X:	net/ipv6/
+	   matches all files in and below net excluding net/ipv6/
+	K: Keyword perl extended regex pattern to match content in a
+	   patch or file.  For instance:
+	   K: of_get_profile
+	      matches patches or files that contain "of_get_profile"
+	   K: \b(printk|pr_(info|err))\b
+	      matches patches or files that contain one or more of the words
+	      printk, pr_info or pr_err
+	   One regex pattern per line.  Multiple K: lines acceptable.
 
 Note: For the hard of thinking, this list is meant to remain in alphabetical
 order. If you could add yourselves to it in alphabetical order that would be
 so much easier [Ed]
 
-P: Person (obsolete)
-M: Mail patches to: FullName <address@domain>
-L: Mailing list that is relevant to this area
-W: Web-page with status/info
-T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
-S: Status, one of the following:
-
-	Supported:	Someone is actually paid to look after this.
-	Maintained:	Someone actually looks after it.
-	Odd Fixes:	It has a maintainer but they don't have time to do
-			much other than throw the odd patch in. See below..
-	Orphan:		No current maintainer [but maybe you could take the
-			role as you write your new code].
-	Obsolete:	Old code. Something tagged obsolete generally means
-			it has been replaced by a better system and you
-			should be using that.
+Maintainers List (try to look for most precise areas first)
 
-F: Files and directories with wildcard patterns.
-   A trailing slash includes all files and subdirectory files.
-	F:	drivers/net/	all files in and below drivers/net
-	F:	drivers/net/*	all files in drivers/net, but not below
-	F:	*/net/*		all files in "any top level directory"/net
-   One pattern per line.  Multiple F: lines acceptable.
-X: Files and directories that are NOT maintained, same rules as F:
-   Files exclusions are tested before file matches.
-   Can be useful for excluding a specific subdirectory, for instance:
-	F:	net/
-	X:	net/ipv6/
-   matches all files in and below net excluding net/ipv6/
+		-----------------------------------
 
 3C505 NETWORK DRIVER
 M:	Philip Blundell <philb@gnu.org>
@@ -992,7 +1000,7 @@ F:	drivers/net/atlx/
 
 ATM
 M:	Chas Williams <chas@cmf.nrl.navy.mil>
-L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
+L:	linux-atm-general@lists.sourceforge.net (moderated for non-subscribers)
 L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
 S:	Maintained
@@ -1480,6 +1488,7 @@ F:	mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
 M:	Rudolf Marek <r.marek@assembler.cz>
+M:	Huaxu Wan <huaxu.wan@intel.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/coretemp
@@ -2151,7 +2160,7 @@ S:	Supported
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
-FREESCALE USB PERIPHERIAL DRIVERS
+FREESCALE USB PERIPHERAL DRIVERS
 M:	Li Yang <leoli@freescale.com>
 L:	linux-usb@vger.kernel.org
 L:	linuxppc-dev@ozlabs.org
@@ -2202,18 +2211,6 @@ F:	Documentation/filesystems/caching/
 F:	fs/fscache/
 F:	include/linux/fscache*.h
 
-TRACING
-M:	Steven Rostedt <rostedt@goodmis.org>
-M:	Frederic Weisbecker <fweisbec@gmail.com>
-M:	Ingo Molnar <mingo@redhat.com>
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
-S:	Maintained
-F:	Documentation/trace/ftrace.txt
-F:	arch/*/*/*/ftrace.h
-F:	arch/*/kernel/ftrace.c
-F:	include/*/ftrace.h include/trace/ include/linux/trace*.h
-F:	kernel/trace/
-
 FUJITSU FR-V (FRV) PORT
 M:	David Howells <dhowells@redhat.com>
 S:	Maintained
@@ -2272,9 +2269,8 @@ S:	Maintained
 F:	include/asm-generic
 
 GENERIC UIO DRIVER FOR PCI DEVICES
-M:	Michael S. Tsirkin <mst@redhat.com>
+M:	"Michael S. Tsirkin" <mst@redhat.com>
 L:	kvm@vger.kernel.org
-L:	linux-kernel@vger.kernel.org
 S:	Supported
 F:	drivers/uio/uio_pci_generic.c
 
@@ -3004,8 +3000,8 @@ F:	scripts/Makefile.*
 
 KERNEL JANITORS
 L:	kernel-janitors@vger.kernel.org
-W:	http://www.kerneljanitors.org/
-S:	Maintained
+W:	http://janitor.kernelnewbies.org/
+S:	Odd Fixes
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
 M:	"J. Bruce Fields" <bfields@fieldses.org>
@@ -3785,7 +3781,7 @@ F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
 OMAP SUPPORT
-M:	"Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
+M:	Tony Lindgren <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 W:	http://www.muru.com/linux/omap/
 W:	http://linux.omap.com/
@@ -3890,6 +3886,15 @@ S:	Maintained
 F:	Documentation/i2c/busses/i2c-ocores
 F:	drivers/i2c/busses/i2c-ocores.c
 
+OPEN FIRMWARE AND FLATTENED DEVICE TREE
+M:	Grant Likely <grant.likely@secretlab.ca>
+L:	devicetree-discuss@lists.ozlabs.org
+W:	http://fdt.secretlab.ca
+S:	Maintained
+F:	drivers/of
+F:	include/linux/of*.h
+K:	of_get_property
+
 OPROFILE
 M:	Robert Richter <robert.richter@amd.com>
 L:	oprofile-list@lists.sf.net
@@ -4325,7 +4330,7 @@ F:	drivers/video/aty/aty128fb.c
 RALINK RT2X00 WIRELESS LAN DRIVER
 P:	rt2x00 project
 L:	linux-wireless@vger.kernel.org
-L:	users@rt2x00.serialmonkey.com
+L:	users@rt2x00.serialmonkey.com (moderated for non-subscribers)
 W:	http://rt2x00.serialmonkey.com/
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
@@ -4534,12 +4539,11 @@ F:	kernel/sched*
 F:	include/linux/sched.h
 
 SCORE ARCHITECTURE
-P:	Chen Liqin
-M:	liqin.chen@sunplusct.com
-P:	Lennox Wu
-M:	lennox.wu@gmail.com
+M:	Chen Liqin <liqin.chen@sunplusct.com>
+M:	Lennox Wu <lennox.wu@gmail.com>
 W:	http://www.sunplusct.com
 S:	Supported
+F:	arch/score/
 
 SCSI CDROM DRIVER
 M:	Jens Axboe <axboe@kernel.dk>
@@ -4612,20 +4616,20 @@ S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-S:     Orphan
-L:     linux-mmc@vger.kernel.org
-F:     drivers/mmc/host/sdhci.*
+S:	Orphan
+L:	linux-mmc@vger.kernel.org
+F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
 M:	Anton Vorontsov <avorontsov@ru.mvista.com>
 L:	linuxppc-dev@ozlabs.org
-L:     linux-mmc@vger.kernel.org
+L:	linux-mmc@vger.kernel.org
 S:	Maintained
-F:     drivers/mmc/host/sdhci-of.*
+F:	drivers/mmc/host/sdhci-of.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
 M:	Ben Dooks <ben-linux@fluff.org>
-L:     linux-mmc@vger.kernel.org
+L:	linux-mmc@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/sdhci-s3c.c
 
@@ -4728,8 +4732,7 @@ F:	drivers/usb/gadget/lh7a40*
 F:	drivers/usb/host/ohci-lh7a40*
 
 SIMPLE FIRMWARE INTERFACE (SFI)
-P:	Len Brown
-M:	lenb@kernel.org
+M:	Len Brown <lenb@kernel.org>
 L:	sfi-devel@simplefirmware.org
 W:	http://simplefirmware.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6.git
@@ -5177,6 +5180,20 @@ L:	tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/char/tpm/
 
+TRACING
+M:	Steven Rostedt <rostedt@goodmis.org>
+M:	Frederic Weisbecker <fweisbec@gmail.com>
+M:	Ingo Molnar <mingo@redhat.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git tracing/core
+S:	Maintained
+F:	Documentation/trace/ftrace.txt
+F:	arch/*/*/*/ftrace.h
+F:	arch/*/kernel/ftrace.c
+F:	include/*/ftrace.h
+F:	include/linux/trace*.h
+F:	include/trace/
+F:	kernel/trace/
+
 TRIVIAL PATCHES
 M:	Jiri Kosina <trivial@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
@@ -5743,8 +5760,7 @@ S:	Maintained
 F:	drivers/scsi/wd7000.c
 
 WINBOND CIR DRIVER
-P:	David Hrdeman
-M:	david@hardeman.nu
+M:	David Härdeman <david@hardeman.nu>
 S:	Maintained
 F:	drivers/input/misc/winbond-cir.c
 
@@ -5801,9 +5817,7 @@ F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
 WOLFSON MICROELECTRONICS PMIC DRIVERS
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
-L:	linux-kernel@vger.kernel.org
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-audioplus
 W:	http://opensource.wolfsonmicro.com/node/8
 S:	Supported

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*

arch/arm/configs/n8x0_defconfig

@@ -304,7 +304,7 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_ZBOOT_ROM_TEXT=0x10C08000
 CONFIG_ZBOOT_ROM_BSS=0x10200000
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS0,115200n8"
+CONFIG_CMDLINE="root=1f03 rootfstype=jffs2 console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 

arch/arm/configs/u300_defconfig

 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 16 23:36:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 17 23:32:24 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -44,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 # CONFIG_GROUP_SCHED is not set
@@ -80,17 +81,15 @@ CONFIG_SHMEM=y
 # CONFIG_AIO is not set
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -133,6 +132,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -147,6 +147,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -169,11 +170,13 @@ CONFIG_DEFAULT_IOSCHED="deadline"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -195,6 +198,7 @@ CONFIG_MACH_U300_BS335=y
 CONFIG_MACH_U300_DUAL_RAM=y
 CONFIG_U300_DEBUG=y
 # CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
 
 #
 # All the settings below must match the bootloader's settings
@@ -207,7 +211,7 @@ CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -222,6 +226,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_ARM_VIC=y
 CONFIG_ARM_VIC_NR=2
 CONFIG_COMMON_CLKDEV=y
@@ -245,6 +250,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -265,6 +272,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -313,6 +321,7 @@ CONFIG_PM=y
 # CONFIG_PM_DEBUG is not set
 # CONFIG_SUSPEND is not set
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -391,6 +401,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 # CONFIG_PREVENT_FIRMWARE_BUILD is not set
 CONFIG_FW_LOADER=y
@@ -402,9 +413,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -453,6 +464,7 @@ CONFIG_MTD_CFI_I2=y
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -520,6 +532,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -540,12 +553,16 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_GPIO is not set
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
@@ -597,6 +614,7 @@ CONFIG_LEGACY_PTY_COUNT=16
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -629,9 +647,6 @@ CONFIG_I2C_STU300=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -653,16 +668,21 @@ CONFIG_SPI_PL022=y
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 # CONFIG_W1 is not set
 CONFIG_POWER_SUPPLY=y
 # CONFIG_POWER_SUPPLY_DEBUG is not set
 # CONFIG_PDA_POWER is not set
 # CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
 # CONFIG_BATTERY_BQ27x00 is not set
 # CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -690,10 +710,24 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
 CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -792,9 +826,10 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 CONFIG_MMC_ARMMMCI=y
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -820,10 +855,10 @@ CONFIG_LEDS_TRIGGER_BACKLIGHT=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
 # CONFIG_RTC_DEBUG is not set
 
 #
@@ -863,6 +898,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
 # CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -878,27 +914,25 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T59 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
 
 #
 # on-CPU RTC drivers
 #
 # CONFIG_RTC_DRV_PL030 is not set
 # CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
 CONFIG_DMADEVICES=y
 
 #
 # DMA Devices
 #
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -913,6 +947,7 @@ CONFIG_REGULATOR=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -975,7 +1010,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 # CONFIG_NETWORK_FILESYSTEMS is not set
 
 #
@@ -1033,6 +1067,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1066,11 +1101,13 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1121,6 +1158,7 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC32 is not set
 # CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y

arch/arm/include/asm/cacheflush.h

@@ -414,9 +414,14 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page
 
 static inline void __flush_icache_all(void)
 {
+#ifdef CONFIG_ARM_ERRATA_411920
+	extern void v6_icache_inval_all(void);
+	v6_icache_inval_all();
+#else
 	asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
 	    :
 	    : "r" (0));
+#endif
 }
 
 #define ARCH_HAS_FLUSH_ANON_PAGE

arch/arm/include/asm/elf.h

@@ -98,6 +98,9 @@ extern int elf_check_arch(const struct elf32_hdr *);
 extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 #define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
 
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
 #define USE_ELF_CORE_DUMP
 #define ELF_EXEC_PAGESIZE	4096
 

arch/arm/include/asm/tlbflush.h

@@ -350,7 +350,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	if (tlb_flag(TLB_WB))
 		dsb();
 
-	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
+	if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
 		if (tlb_flag(TLB_V3_FULL))
 			asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
 		if (tlb_flag(TLB_V4_U_FULL))
@@ -360,6 +360,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		if (tlb_flag(TLB_V4_I_FULL))
 			asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
 	}
+	put_cpu();
 
 	if (tlb_flag(TLB_V6_U_ASID))
 		asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");

arch/arm/kernel/entry-armv.S

@@ -608,33 +608,33 @@ call_fpe:
  THUMB(	add	pc, r8			)
 	nop
 
-	W(mov)	pc, lr				@ CP#0
+	movw_pc	lr				@ CP#0
 	W(b)	do_fpe				@ CP#1 (FPE)
 	W(b)	do_fpe				@ CP#2 (FPE)
-	W(mov)	pc, lr				@ CP#3
+	movw_pc	lr				@ CP#3
 #ifdef CONFIG_CRUNCH
 	b	crunch_task_enable		@ CP#4 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#5 (MaverickCrunch)
 	b	crunch_task_enable		@ CP#6 (MaverickCrunch)
 #else
-	W(mov)	pc, lr				@ CP#4
-	W(mov)	pc, lr				@ CP#5
-	W(mov)	pc, lr				@ CP#6
+	movw_pc	lr				@ CP#4
+	movw_pc	lr				@ CP#5
+	movw_pc	lr				@ CP#6
 #endif
-	W(mov)	pc, lr				@ CP#7
-	W(mov)	pc, lr				@ CP#8
-	W(mov)	pc, lr				@ CP#9
+	movw_pc	lr				@ CP#7
+	movw_pc	lr				@ CP#8
+	movw_pc	lr				@ CP#9
 #ifdef CONFIG_VFP
 	W(b)	do_vfp				@ CP#10 (VFP)
 	W(b)	do_vfp				@ CP#11 (VFP)
 #else
-	W(mov)	pc, lr				@ CP#10 (VFP)
-	W(mov)	pc, lr				@ CP#11 (VFP)
+	movw_pc	lr				@ CP#10 (VFP)
+	movw_pc	lr				@ CP#11 (VFP)
 #endif
-	W(mov)	pc, lr				@ CP#12
-	W(mov)	pc, lr				@ CP#13
-	W(mov)	pc, lr				@ CP#14 (Debug)
-	W(mov)	pc, lr				@ CP#15 (Control)
+	movw_pc	lr				@ CP#12
+	movw_pc	lr				@ CP#13
+	movw_pc	lr				@ CP#14 (Debug)
+	movw_pc	lr				@ CP#15 (Control)
 
 #ifdef CONFIG_NEON
 	.align	6

arch/arm/kernel/entry-header.S

@@ -110,6 +110,13 @@
 	mov	\rd, sp, lsr #13
 	mov	\rd, \rd, lsl #13
 	.endm
+
+	@
+	@ 32-bit wide "mov pc, reg"
+	@
+	.macro	movw_pc, reg
+	mov	pc, \reg
+	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
 	.macro	svc_exit, rpsr
 	clrex					@ clear the exclusive monitor
@@ -146,6 +153,14 @@
 	lsr	\rd, \rd, #13
 	mov	\rd, \rd, lsl #13
 	.endm
+
+	@
+	@ 32-bit wide "mov pc, reg"
+	@
+	.macro	movw_pc, reg
+	mov	pc, \reg
+	nop
+	.endm
 #endif	/* !CONFIG_THUMB2_KERNEL */
 
 /*

arch/arm/kernel/process.c

@@ -327,6 +327,15 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
 	return 0;
 }
 
+/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+	elf_core_copy_regs(elfregs, task_pt_regs(t));
+	return 1;
+}
+
 /*
  * fill in the fpe structure for a core dump...
  */

arch/arm/kernel/signal.c

 /*
  *  linux/arch/arm/kernel/signal.c
  *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2009 Russell King
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -29,6 +29,7 @@
  */
 #define SWI_SYS_SIGRETURN	(0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE))
 #define SWI_SYS_RT_SIGRETURN	(0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE))
+#define SWI_SYS_RESTART		(0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE)
 
 /*
  * With EABI, the syscall number has to be loaded into r7.
@@ -48,6 +49,18 @@ const unsigned long sigreturn_codes[7] = {
 	MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN,
 };
 
+/*
+ * Either we support OABI only, or we have EABI with the OABI
+ * compat layer enabled.  In the later case we don't know if
+ * user space is EABI or not, and if not we must not clobber r7.
+ * Always using the OABI syscall solves that issue and works for
+ * all those cases.
+ */
+const unsigned long syscall_restart_code[2] = {
+	SWI_SYS_RESTART,	/* swi	__NR_restart_syscall */
+	0xe49df004,		/* ldr	pc, [sp], #4 */
+};
+
 /*
  * atomically swap in the new signal mask, and wait for a signal.
  */
@@ -645,32 +658,12 @@ static void do_signal(struct pt_regs *regs, int syscall)
 				regs->ARM_pc -= 4;
 #else
 				u32 __user *usp;
-				u32 swival = __NR_restart_syscall;
 
-				regs->ARM_sp -= 12;
+				regs->ARM_sp -= 4;
 				usp = (u32 __user *)regs->ARM_sp;
 
-				/*
-				 * Either we supports OABI only, or we have
-				 * EABI with the OABI compat layer enabled.
-				 * In the later case we don't know if user
-				 * space is EABI or not, and if not we must
-				 * not clobber r7.  Always using the OABI
-				 * syscall solves that issue and works for
-				 * all those cases.
-				 */
-				swival = swival - __NR_SYSCALL_BASE + __NR_OABI_SYSCALL_BASE;
-
-				put_user(regs->ARM_pc, &usp[0]);
-				/* swi __NR_restart_syscall */
-				put_user(0xef000000 | swival, &usp[1]);
-				/* ldr	pc, [sp], #12 */
-				put_user(0xe49df00c, &usp[2]);
-
-				flush_icache_range((unsigned long)usp,
-						   (unsigned long)(usp + 3));
-
-				regs->ARM_pc = regs->ARM_sp + 4;
+				put_user(regs->ARM_pc, usp);
+				regs->ARM_pc = KERN_RESTART_CODE;
 #endif
 			}
 		}

arch/arm/kernel/signal.h

 /*
  *  linux/arch/arm/kernel/signal.h
  *
- *  Copyright (C) 2005 Russell King.
+ *  Copyright (C) 2005-2009 Russell King.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
 #define KERN_SIGRETURN_CODE	(CONFIG_VECTORS_BASE + 0x00000500)
+#define KERN_RESTART_CODE	(KERN_SIGRETURN_CODE + sizeof(sigreturn_codes))
 
 extern const unsigned long sigreturn_codes[7];
+extern const unsigned long syscall_restart_code[2];

arch/arm/kernel/traps.c

 /*
  *  linux/arch/arm/kernel/traps.c
  *
- *  Copyright (C) 1995-2002 Russell King
+ *  Copyright (C) 1995-2009 Russell King
  *  Fragments that appear the same as linux/arch/i386/kernel/traps.c (C) Linus Torvalds
  *
  * This program is free software; you can redistribute it and/or modify
@@ -751,6 +751,8 @@ void __init early_trap_init(void)
 	 */
 	memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
 	       sizeof(sigreturn_codes));
+	memcpy((void *)KERN_RESTART_CODE, syscall_restart_code,
+	       sizeof(syscall_restart_code));
 
 	flush_icache_range(vectors, vectors + PAGE_SIZE);
 	modify_domain(DOMAIN_USER, DOMAIN_CLIENT);

arch/arm/kernel/unwind.c

@@ -26,6 +26,15 @@
  * http://infocenter.arm.com/help/topic/com.arm.doc.subset.swdev.abi/index.html
  */
 
+#if !defined (__ARM_EABI__)
+#warning Your compiler does not have EABI support.
+#warning    ARM unwind is known to compile only with EABI compilers.
+#warning    Change compiler or disable ARM_UNWIND option.
+#elif (__GNUC__ == 4 && __GNUC_MINOR__ <= 2)
+#warning Your compiler is too buggy; it is known to not compile ARM unwind support.
+#warning    Change compiler or disable ARM_UNWIND option.
+#endif
+
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/module.h>

arch/arm/mach-at91/at91sam9g45_devices.c

@@ -838,7 +838,7 @@ static void __init at91_add_device_rtt(void)
  *  Watchdog
  * -------------------------------------------------------------------- */
 
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
 static struct platform_device at91sam9g45_wdt_device = {
 	.name		= "at91_wdt",
 	.id		= -1,

arch/arm/mach-at91/include/mach/cpu.h

@@ -25,6 +25,8 @@
 #define ARCH_ID_AT91SAM9G20	0x019905a0
 #define ARCH_ID_AT91SAM9RL64	0x019b03a0
 #define ARCH_ID_AT91SAM9G45	0x819b05a0
+#define ARCH_ID_AT91SAM9G45MRL	0x819b05a2	/* aka 9G45-ES2 & non ES lots */
+#define ARCH_ID_AT91SAM9G45ES	0x819b05a1	/* 9G45-ES (Engineering Sample) */
 #define ARCH_ID_AT91CAP9	0x039A03A0
 
 #define ARCH_ID_AT91SAM9XE128	0x329973a0
@@ -41,6 +43,11 @@ static inline unsigned long at91_cpu_identify(void)
 	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
 }
 
+static inline unsigned long at91_cpu_fully_identify(void)
+{
+	return at91_sys_read(AT91_DBGU_CIDR);
+}
+
 #define ARCH_EXID_AT91SAM9M11	0x00000001
 #define ARCH_EXID_AT91SAM9M10	0x00000002
 #define ARCH_EXID_AT91SAM9G45	0x00000004
@@ -118,8 +125,10 @@ static inline unsigned long at91cap9_rev_identify(void)
 
 #ifdef CONFIG_ARCH_AT91SAM9G45
 #define cpu_is_at91sam9g45()	(at91_cpu_identify() == ARCH_ID_AT91SAM9G45)
+#define cpu_is_at91sam9g45es()	(at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES)
 #else
 #define cpu_is_at91sam9g45()	(0)
+#define cpu_is_at91sam9g45es()	(0)
 #endif
 
 #ifdef CONFIG_ARCH_AT91CAP9

arch/arm/mach-ep93xx/core.c

@@ -206,7 +206,6 @@ static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc)
 	for (i = 0; i < 8; i++) {
 		if (status & (1 << i)) {
 			int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
-			desc = irq_desc + gpio_irq;
 			generic_handle_irq(gpio_irq);
 		}
 	}

arch/arm/mach-ep93xx/edb93xx.c

@@ -112,7 +112,7 @@ static void __init edb93xx_register_i2c(void)
 				    ARRAY_SIZE(edb93xxa_i2c_board_info));
 	} else if (machine_is_edb9307() || machine_is_edb9312() ||
 		   machine_is_edb9315()) {
-		ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
 				    edb93xx_i2c_board_info,
 				    ARRAY_SIZE(edb93xx_i2c_board_info));
 	}

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -17,7 +17,6 @@ struct ep93xx_eth_data
 
 void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
 
 /* EP93xx System Controller software locked register write */
 void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);

arch/arm/mach-integrator/include/mach/memory.h

@@ -28,5 +28,6 @@
 #define BUS_OFFSET	UL(0x80000000)
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET + BUS_OFFSET)
 #define __bus_to_virt(x)	((x) - BUS_OFFSET + PAGE_OFFSET)
+#define __pfn_to_bus(x)		(((x) << PAGE_SHIFT) + BUS_OFFSET)
 
 #endif

arch/arm/mach-mx2/clock_imx27.c

@@ -638,9 +638,9 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
 	_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
-	_REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
-	_REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
-	_REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+	_REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
@@ -665,7 +665,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)

arch/arm/mach-mx2/pcm038.c

@@ -23,6 +23,10 @@
 #include <linux/mtd/plat-ram.h>
 #include <linux/mtd/physmap.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -35,6 +39,7 @@
 #include <mach/iomux.h>
 #include <mach/imx-uart.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -78,8 +83,6 @@ static int pcm038_pins[] = {
 	PC6_PF_I2C2_SCL,
 	/* SPI1 */
 	PD25_PF_CSPI1_RDY,
-	PD27_PF_CSPI1_SS1,
-	PD28_PF_CSPI1_SS0,
 	PD29_PF_CSPI1_SCLK,
 	PD30_PF_CSPI1_MISO,
 	PD31_PF_CSPI1_MOSI,
@@ -196,6 +199,86 @@ static struct i2c_board_info pcm038_i2c_devices[] = {
 	}
 };
 
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+	.chipselect = pcm038_spi_cs,
+	.num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+	{
+		.dev	= &mxc_sdhc_device1.dev,
+		.supply	= "sdhc_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc1_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+	.consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= NULL,
+		.supply	= "imx_cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_data = {
+	.constraints = {
+		.min_uV = 3000000,
+		.max_uV = 3400000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 0,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_data,
+	}, {
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc1_data,
+	},
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+	.regulators = pcm038_regulators,
+	.num_regulators = ARRAY_SIZE(pcm038_regulators),
+	.flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+		 MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IRQ_GPIOB(23),
+		.max_speed_hz = 300000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.platform_data = &pcm038_pmic,
+		.mode = SPI_CS_HIGH,
+	}
+};
+
 static void __init pcm038_init(void)
 {
 	mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
@@ -219,6 +302,15 @@ static void __init pcm038_init(void)
 	/* PE18 for user-LED D40 */
 	mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
 
+	mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+	/* MC13783 IRQ */
+	mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+	mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+	spi_register_board_info(pcm038_spi_board_info,
+				ARRAY_SIZE(pcm038_spi_board_info));
+
 	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
 
 #ifdef CONFIG_MACH_PCM970_BASEBOARD

arch/arm/mach-mx2/pcm970-baseboard.c

@@ -39,7 +39,6 @@ static int pcm970_pins[] = {
 	PB7_PF_SD2_D3,
 	PB8_PF_SD2_CMD,
 	PB9_PF_SD2_CLK,
-	GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
 	/* display */
 	PA5_PF_LSCLK,
 	PA6_PF_LD0,
@@ -228,6 +227,7 @@ void __init pcm970_baseboard_init(void)
 			"PCM970");
 
 	mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+	mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
 	mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
 	platform_device_register(&pcm970_sja1000);
 }

arch/arm/mach-mx25/devices.c

+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/gpio.h>
 #include <mach/mx25.h>
 #include <mach/irqs.h>

arch/arm/mach-mx25/mx25pdk.c

+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA  02110-1301, USA.
+ */
+
 #include <linux/types.h>
 #include <linux/init.h>
 #include <linux/clk.h>
@@ -23,19 +41,12 @@ static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
-static struct mxc_nand_platform_data nand_board_info = {
-	.width = 1,
-	.hw_ecc = 1,
-};
-
 static void __init mx25pdk_init(void)
 {
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
-	mxc_register_device(&mxc_nand_device, &nand_board_info);
 }
 
-
 static void __init mx25pdk_timer_init(void)
 {
 	mx25_clocks_init(26000000);

arch/arm/mach-mx3/clock-imx35.c

@@ -443,7 +443,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
-	_REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
 	_REGISTER_CLOCK(NULL, "admux", admux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)

arch/arm/mach-mx3/clock.c

@@ -530,7 +530,7 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
 	_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
 	_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
-	_REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit1_clk)
 	_REGISTER_CLOCK(NULL, "epit", epit2_clk)

arch/arm/mach-mx3/devices.c

@@ -459,7 +459,7 @@ struct platform_device mxc_usbh2 = {
  * SPI master controller
  * 3 channels
  */
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
 	{
 	       .start = CSPI1_BASE_ADDR,
 	       .end = CSPI1_BASE_ADDR + SZ_4K - 1,
@@ -471,7 +471,7 @@ static struct resource imx_spi_0_resources[] = {
 	},
 };
 
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
 	{
 		.start = CSPI2_BASE_ADDR,
 		.end = CSPI2_BASE_ADDR + SZ_4K - 1,
@@ -483,7 +483,7 @@ static struct resource imx_spi_1_resources[] = {
 	},
 };
 
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
 	{
 		.start = CSPI3_BASE_ADDR,
 		.end = CSPI3_BASE_ADDR + SZ_4K - 1,
@@ -495,25 +495,25 @@ static struct resource imx_spi_2_resources[] = {
 	},
 };
 
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
 	.name = "spi_imx",
 	.id = 0,
-	.num_resources = ARRAY_SIZE(imx_spi_0_resources),
-	.resource = imx_spi_0_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_0_resources),
+	.resource = mxc_spi_0_resources,
 };
 
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
 	.name = "spi_imx",
 	.id = 1,
-	.num_resources = ARRAY_SIZE(imx_spi_1_resources),
-	.resource = imx_spi_1_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_1_resources),
+	.resource = mxc_spi_1_resources,
 };
 
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
 	.name = "spi_imx",
 	.id = 2,
-	.num_resources = ARRAY_SIZE(imx_spi_2_resources),
-	.resource = imx_spi_2_resources,
+	.num_resources = ARRAY_SIZE(mxc_spi_2_resources),
+	.resource = mxc_spi_2_resources,
 };
 
 #ifdef CONFIG_ARCH_MX35

arch/arm/mach-mx3/devices.h

@@ -20,7 +20,7 @@ extern struct platform_device mxc_otg_host;
 extern struct platform_device mxc_usbh1;
 extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
-extern struct platform_device imx_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
 

arch/arm/mach-mx3/mm.c

@@ -81,6 +81,7 @@ void __init mx31_map_io(void)
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
 
+#ifdef CONFIG_ARCH_MX35
 void __init mx35_map_io(void)
 {
 	mxc_set_cpu_type(MXC_CPU_MX35);
@@ -89,6 +90,7 @@ void __init mx35_map_io(void)
 
 	iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
 }
+#endif
 
 void __init mx31_init_irq(void)
 {

arch/arm/mach-omap1/board-ams-delta.c

@@ -219,6 +219,10 @@ static struct platform_device *ams_delta_devices[] __initdata = {
 
 static void __init ams_delta_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+
 	iotable_init(ams_delta_io_desc, ARRAY_SIZE(ams_delta_io_desc));
 
 	omap_board_config = ams_delta_config;
@@ -231,6 +235,8 @@ static void __init ams_delta_init(void)
 
 	omap_usb_init(&ams_delta_usb_config);
 	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
+
+	omap_writew(omap_readw(ARM_RSTCT1) | 0x0004, ARM_RSTCT1);
 }
 
 static struct plat_serial8250_port ams_delta_modem_ports[] = {

arch/arm/mach-omap1/board-generic.c

@@ -64,6 +64,14 @@ static void __init omap_generic_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
 		omap_usb_init(&generic1510_usb_config);
 	}
 #endif

arch/arm/mach-omap1/board-innovator.c

@@ -376,6 +376,26 @@ static void __init innovator_init(void)
 {
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap1510()) {
+		unsigned char reg;
+
+		/* mux pins for uarts */
+		omap_cfg_reg(UART1_TX);
+		omap_cfg_reg(UART1_RTS);
+		omap_cfg_reg(UART2_TX);
+		omap_cfg_reg(UART2_RTS);
+		omap_cfg_reg(UART3_TX);
+		omap_cfg_reg(UART3_RX);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM1_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
+		reg = fpga_read(OMAP1510_FPGA_POWER);
+		reg |= OMAP1510_FPGA_PCR_COM2_EN;
+		fpga_write(reg, OMAP1510_FPGA_POWER);
+		udelay(10);
+
 		platform_add_devices(innovator1510_devices, ARRAY_SIZE(innovator1510_devices));
 		spi_register_board_info(innovator1510_boardinfo,
 				ARRAY_SIZE(innovator1510_boardinfo));

arch/arm/mach-omap1/board-palmte.c

@@ -342,6 +342,14 @@ static void __init palmte_misc_gpio_setup(void)
 
 static void __init omap_palmte_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	omap_board_config = palmte_config;
 	omap_board_config_size = ARRAY_SIZE(palmte_config);
 

arch/arm/mach-omap1/board-palmtt.c

@@ -289,6 +289,14 @@ static void __init omap_mpu_wdt_mode(int mode) {
 
 static void __init omap_palmtt_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	omap_mpu_wdt_mode(0);
 
 	omap_board_config = palmtt_config;

arch/arm/mach-omap1/board-palmz71.c

@@ -307,6 +307,14 @@ palmz71_gpio_setup(int early)
 static void __init
 omap_palmz71_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	palmz71_gpio_setup(1);
 	omap_mpu_wdt_mode(0);
 

arch/arm/mach-omap1/board-sx1.c

@@ -377,6 +377,14 @@ static struct omap_board_config_kernel sx1_config[] __initdata = {
 
 static void __init omap_sx1_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	platform_add_devices(sx1_devices, ARRAY_SIZE(sx1_devices));
 
 	omap_board_config = sx1_config;

arch/arm/mach-omap1/board-voiceblue.c

@@ -152,6 +152,14 @@ static void __init voiceblue_init_irq(void)
 
 static void __init voiceblue_init(void)
 {
+	/* mux pins for uarts */
+	omap_cfg_reg(UART1_TX);
+	omap_cfg_reg(UART1_RTS);
+	omap_cfg_reg(UART2_TX);
+	omap_cfg_reg(UART2_RTS);
+	omap_cfg_reg(UART3_TX);
+	omap_cfg_reg(UART3_RX);
+
 	/* Watchdog */
 	gpio_request(0, "Watchdog");
 	/* smc91x reset */

arch/arm/mach-omap1/serial.c

@@ -131,8 +131,6 @@ void __init omap_serial_init(void)
 	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		unsigned char reg;
-
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
@@ -143,16 +141,6 @@ void __init omap_serial_init(void)
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart1_ck, 12000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART1_TX);
-				omap_cfg_reg(UART1_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM1_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
 			break;
 		case 1:
 			uart2_ck = clk_get(NULL, "uart2_ck");
@@ -165,16 +153,6 @@ void __init omap_serial_init(void)
 				else
 					clk_set_rate(uart2_ck, 48000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART2_TX);
-				omap_cfg_reg(UART2_RTS);
-				if (machine_is_omap_innovator()) {
-					reg = fpga_read(OMAP1510_FPGA_POWER);
-					reg |= OMAP1510_FPGA_PCR_COM2_EN;
-					fpga_write(reg, OMAP1510_FPGA_POWER);
-					udelay(10);
-				}
-			}
 			break;
 		case 2:
 			uart3_ck = clk_get(NULL, "uart3_ck");
@@ -185,10 +163,6 @@ void __init omap_serial_init(void)
 				if (cpu_is_omap15xx())
 					clk_set_rate(uart3_ck, 12000000);
 			}
-			if (cpu_is_omap15xx()) {
-				omap_cfg_reg(UART3_TX);
-				omap_cfg_reg(UART3_RX);
-			}
 			break;
 		}
 		omap_serial_reset(&serial_platform_data[i]);

arch/arm/mach-omap2/Kconfig

@@ -73,9 +73,21 @@ config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 
+config MACH_NOKIA_N800
+       bool
+
+config MACH_NOKIA_N810
+       bool
+
+config MACH_NOKIA_N810_WIMAX
+       bool
+
 config MACH_NOKIA_N8X0
 	bool "Nokia N800/N810"
 	depends on ARCH_OMAP2420
+	select MACH_NOKIA_N800
+	select MACH_NOKIA_N810
+	select MACH_NOKIA_N810_WIMAX
 
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"

arch/arm/mach-omap2/board-3430sdp.c

@@ -17,6 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/i2c/twl4030.h>
@@ -38,7 +39,6 @@
 #include <mach/gpmc.h>
 
 #include <mach/control.h>
-#include <mach/keypad.h>
 #include <mach/gpmc-smc91x.h>
 
 #include "sdram-qimonda-hyb18m512160af-6.h"

arch/arm/mach-omap2/board-4430sdp.c

@@ -58,6 +58,8 @@ static void __init gic_init_irq(void)
 
 static void __init omap_4430sdp_init_irq(void)
 {
+	omap_board_config = sdp4430_config;
+	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap2_init_common_hw(NULL, NULL);
 #ifdef CONFIG_OMAP_32K_TIMER
 	omap2_gp_clockevent_set_gptimer(1);
@@ -70,8 +72,6 @@ static void __init omap_4430sdp_init_irq(void)
 static void __init omap_4430sdp_init(void)
 {
 	platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
-	omap_board_config = sdp4430_config;
-	omap_board_config_size = ARRAY_SIZE(sdp4430_config);
 	omap_serial_init();
 }
 

arch/arm/mach-omap2/board-ldp.c

@@ -16,6 +16,7 @@
 #include <linux/platform_device.h>
 #include <linux/delay.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 #include <linux/workqueue.h>
 #include <linux/err.h>
@@ -41,7 +42,6 @@
 #include <asm/delay.h>
 #include <mach/control.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 

arch/arm/mach-omap2/board-omap3evm.c

@@ -20,6 +20,7 @@
 #include <linux/clk.h>
 #include <linux/gpio.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
 
 #include <linux/spi/spi.h>
@@ -37,7 +38,6 @@
 #include <mach/usb.h>
 #include <mach/common.h>
 #include <mach/mcspi.h>
-#include <mach/keypad.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"

arch/arm/mach-omap2/board-omap3pandora.c

@@ -27,6 +27,7 @@
 #include <linux/i2c/twl4030.h>
 #include <linux/leds.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio_keys.h>
 
 #include <asm/mach-types.h>
@@ -39,7 +40,6 @@
 #include <mach/hardware.h>
 #include <mach/mcspi.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 #include <mach/mux.h>
 
 #include "sdram-micron-mt46h32m32lf-6.h"

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -12,6 +12,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c.h>
 #include <linux/i2c/twl4030.h>
@@ -27,7 +28,6 @@
 #include <mach/common.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
-#include <mach/keypad.h>
 #include <mach/onenand.h>
 #include <mach/gpmc-smc91x.h>
 

arch/arm/mach-omap2/board-rx51.c

@@ -26,7 +26,6 @@
 #include <mach/mux.h>
 #include <mach/board.h>
 #include <mach/common.h>
-#include <mach/keypad.h>
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>

arch/arm/mach-omap2/board-zoom2.c

@@ -13,6 +13,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
 #include <linux/i2c/twl4030.h>
 #include <linux/regulator/machine.h>
@@ -22,7 +23,6 @@
 
 #include <mach/common.h>
 #include <mach/usb.h>
-#include <mach/keypad.h>
 
 #include "mmc-twl4030.h"
 #include "sdram-micron-mt46h32m32lf-6.h"

arch/arm/mach-omap2/io.c

@@ -302,7 +302,9 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
 	omap2_clk_init();
+#endif
 	omap_serial_early_init();
+#ifndef CONFIG_ARCH_OMAP4
 	omap_hwmod_late_init();
 	omap_pm_if_init();
 	omap2_sdrc_init(sdrc_cs0, sdrc_cs1);

arch/arm/mach-omap2/pm34xx.c

@@ -639,14 +639,15 @@ static void __init prcm_setup_regs(void)
 	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
-	/* Enable GPIO wakeups in PER */
+	/* Enable wakeups in PER */
 	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_EN_GPIO6, OMAP3430_PER_MOD, PM_WKEN);
+			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
 	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_GRPSEL_GPIO6,
+			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
 			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
 	/* Don't attach IVA interrupts */

arch/arm/mach-omap2/serial.c

@@ -109,16 +109,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
-#ifdef CONFIG_ARCH_OMAP4
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
-		.mapbase	= OMAP_UART4_BASE,
-		.irq		= 70,
-		.flags		= UPF_BOOT_AUTOCONF,
-		.iotype		= UPIO_MEM,
-		.regshift	= 2,
-		.uartclk	= OMAP24XX_BASE_BAUD * 16,
-	}, {
-#endif
 		.flags		= 0
 	}
 };

arch/arm/mach-pxa/cm-x300.c

@@ -43,10 +43,10 @@
 
 #define CM_X300_ETH_PHYS	0x08000010
 
-#define GPIO82_MMC2_IRQ		(82)
-#define GPIO85_MMC2_WP		(85)
+#define GPIO82_MMC_IRQ		(82)
+#define GPIO85_MMC_WP		(85)
 
-#define	CM_X300_MMC2_IRQ	IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define	CM_X300_MMC_IRQ		IRQ_GPIO(GPIO82_MMC_IRQ)
 
 #define GPIO95_RTC_CS		(95)
 #define GPIO96_RTC_WR		(96)
@@ -292,37 +292,37 @@ static inline void cm_x300_init_nand(void) {}
 #endif
 
 #if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+	.detect_delay		= 20,
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO82_MMC_IRQ,
+	.gpio_card_ro		= GPIO85_MMC_WP,
+	.gpio_power		= -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
    no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
-			    irq_handler_t cm_x300_detect_int,
-			    void *data)
+static int cm_x300_mci2_init(struct device *dev,
+			     irq_handler_t cm_x300_detect_int,
+	void *data)
 {
 	return 0;
 }
 
-static void cm_x300_mci_exit(struct device *dev, void *data)
+static void cm_x300_mci2_exit(struct device *dev, void *data)
 {
 }
 
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
 	.detect_delay		= 20,
 	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 			= cm_x300_mci_init,
-	.exit			= cm_x300_mci_exit,
+	.init 			= cm_x300_mci2_init,
+	.exit			= cm_x300_mci2_exit,
 	.gpio_card_detect	= -1,
 	.gpio_card_ro		= -1,
 	.gpio_power		= -1,
 };
 
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
-	.detect_delay		= 20,
-	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO82_MMC2_IRQ,
-	.gpio_card_ro		= GPIO85_MMC2_WP,
-	.gpio_power		= -1,
-};
-
 static void __init cm_x300_init_mmc(void)
 {
 	pxa_set_mci_info(&cm_x300_mci_platform_data);

arch/arm/mach-pxa/spitz.c

@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/delay.h>
+#include <linux/gpio_keys.h>
 #include <linux/gpio.h>
 #include <linux/leds.h>
 #include <linux/mtd/physmap.h>
@@ -375,6 +376,43 @@ static struct platform_device spitzkbd_device = {
 };
 
 
+static struct gpio_keys_button spitz_gpio_keys[] = {
+	{
+		.type	= EV_PWR,
+		.code	= KEY_SUSPEND,
+		.gpio	= SPITZ_GPIO_ON_KEY,
+		.desc	= "On/Off",
+		.wakeup	= 1,
+	},
+	/* Two buttons detecting the lid state */
+	{
+		.type	= EV_SW,
+		.code	= 0,
+		.gpio	= SPITZ_GPIO_SWA,
+		.desc	= "Display Down",
+	},
+	{
+		.type	= EV_SW,
+		.code	= 1,
+		.gpio	= SPITZ_GPIO_SWB,
+		.desc	= "Lid Closed",
+	},
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+	.buttons	= spitz_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &spitz_gpio_keys_platform_data,
+	},
+};
+
+
 /*
  * Spitz LEDs
  */
@@ -689,6 +727,7 @@ static struct platform_device sharpsl_rom_device = {
 static struct platform_device *devices[] __initdata = {
 	&spitzscoop_device,
 	&spitzkbd_device,
+	&spitz_gpio_keys_device,
 	&spitzled_device,
 	&sharpsl_nand_device,
 	&sharpsl_rom_device,

arch/arm/mach-realview/core.h

@@ -61,5 +61,5 @@ extern void realview_timer_init(unsigned int timer_irq);
 extern int realview_flash_register(struct resource *res, u32 num);
 extern int realview_eth_register(const char *name, struct resource *res);
 extern int realview_usb_register(struct resource *res);
-
+extern void (*realview_reset)(char);
 #endif

arch/arm/mach-realview/include/mach/board-pb1176.h

@@ -73,4 +73,9 @@
 #define REALVIEW_PB1176_GIC_DIST_BASE		0x10041000 /* GIC distributor, on FPGA */
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
+/*
+ * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ */
+#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL    0x0100
+
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */

arch/arm/mach-realview/include/mach/board-pb11mp.h

@@ -81,4 +81,16 @@
 #define REALVIEW_TC11MP_GIC_DIST_BASE		0x1F001000	/* Test chip interrupt controller distributor */
 #define REALVIEW_TC11MP_L220_BASE		0x1F002000	/* L220 registers */
 
+ /*
+ * Values for REALVIEW_SYS_RESET_CTRL
+ */
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR    0x01
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGINIT   0x02
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DLLRESET     0x03
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_PLLRESET     0x04
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_POR          0x05
+#define REALVIEW_PB11MP_SYS_CTRL_RESET_DoC          0x06
+
+#define REALVIEW_PB11MP_SYS_CTRL_LED         (1 << 0)
+
 #endif	/* __ASM_ARCH_BOARD_PB11MP_H */

arch/arm/mach-realview/include/mach/platform.h

@@ -119,19 +119,6 @@
 #define REALVIEW_SYS_TEST_OSC3               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC3_OFFSET)
 #define REALVIEW_SYS_TEST_OSC4               (REALVIEW_SYS_BASE + REALVIEW_SYS_TEST_OSC4_OFFSET)
 
-/* 
- * Values for REALVIEW_SYS_RESET_CTRL
- */
-#define REALVIEW_SYS_CTRL_RESET_CONFIGCLR    0x01
-#define REALVIEW_SYS_CTRL_RESET_CONFIGINIT   0x02
-#define REALVIEW_SYS_CTRL_RESET_DLLRESET     0x03
-#define REALVIEW_SYS_CTRL_RESET_PLLRESET     0x04
-#define REALVIEW_SYS_CTRL_RESET_POR          0x05
-#define REALVIEW_SYS_CTRL_RESET_DoC          0x06
-
-#define REALVIEW_SYS_CTRL_LED         (1 << 0)
-
-
 /* ------------------------------------------------------------------------
  *  RealView control registers
  * ------------------------------------------------------------------------
@@ -153,7 +140,7 @@
  *     SYS_CLD, SYS_BOOTCS
  */
 #define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK	0xFFFF		/* write 0xA05F to enable write access */
+#define REALVIEW_SYS_LOCKVAL_MASK	0xA05F	       /* Enable write access */
 
 /*
  * REALVIEW_SYS_FLASH

arch/arm/mach-realview/include/mach/system.h

@@ -25,6 +25,8 @@
 #include <mach/hardware.h>
 #include <mach/platform.h>
 
+void (*realview_reset)(char mode);
+
 static inline void arch_idle(void)
 {
 	/*
@@ -36,16 +38,12 @@ static inline void arch_idle(void)
 
 static inline void arch_reset(char mode, const char *cmd)
 {
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) + REALVIEW_SYS_RESETCTL_OFFSET;
-	unsigned int val;
-
 	/*
 	 * To reset, we hit the on-board reset register
 	 * in the system FPGA
 	 */
-	val = __raw_readl(hdr_ctrl);
-	val |= REALVIEW_SYS_CTRL_RESET_CONFIGCLR;
-	__raw_writel(val, hdr_ctrl);
+	if (realview_reset)
+		realview_reset(mode);
 }
 
 #endif

arch/arm/mach-realview/realview_pb1176.c

@@ -290,6 +290,16 @@ static struct sys_timer realview_pb1176_timer = {
 	.init		= realview_pb1176_timer_init,
 };
 
+static void realview_pb1176_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+		REALVIEW_SYS_RESETCTL_OFFSET;
+	void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+		REALVIEW_SYS_LOCK_OFFSET;
+	__raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
+	__raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+}
+
 static void __init realview_pb1176_init(void)
 {
 	int i;
@@ -313,6 +323,7 @@ static void __init realview_pb1176_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pb1176_reset;
 }
 
 MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176")

arch/arm/mach-realview/realview_pb11mp.c

@@ -299,6 +299,21 @@ static struct sys_timer realview_pb11mp_timer = {
 	.init		= realview_pb11mp_timer_init,
 };
 
+static void realview_pb11mp_reset(char mode)
+{
+	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
+		REALVIEW_SYS_RESETCTL_OFFSET;
+	unsigned int val;
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	val = __raw_readl(hdr_ctrl);
+	val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
+	__raw_writel(val, hdr_ctrl);
+}
+
 static void __init realview_pb11mp_init(void)
 {
 	int i;
@@ -324,6 +339,7 @@ static void __init realview_pb11mp_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pb11mp_reset;
 }
 
 MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore")

arch/arm/mach-s3c2410/gpio.c

@@ -28,6 +28,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-fns.h>
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>

arch/arm/mach-s3c2410/include/mach/dma.h

@@ -110,6 +110,8 @@ enum s3c2410_dma_loadst {
 					    * waiting for reloads */
 #define S3C2410_DMAF_AUTOSTART    (1<<1)   /* auto-start if buffer queued */
 
+#define S3C2410_DMAF_CIRCULAR	(1 << 2)	/* no circular dma support */
+
 /* dma buffer */
 
 struct s3c2410_dma_buf;
@@ -194,4 +196,9 @@ struct s3c2410_dma_chan {
 
 typedef unsigned long dma_device_t;
 
+static inline bool s3c_dma_has_circular(void)
+{
+	return false;
+}
+
 #endif /* __ASM_ARCH_DMA_H */

arch/arm/mach-s3c2440/Kconfig

@@ -103,6 +103,7 @@ config MACH_MINI2440
 	select LEDS_TRIGGER_BACKLIGHT
 	select SND_S3C24XX_SOC_S3C24XX_UDA134X
 	select S3C_DEV_NAND
+	select S3C_DEV_USB_HOST
 	help
 	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.

arch/arm/mach-s3c2440/mach-mini2440.c

@@ -144,7 +144,7 @@ static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = {
 	.type		= (S3C2410_LCDCON1_TFT16BPP |\
 			   S3C2410_LCDCON1_TFT)
 
-struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
+static struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 	[0] = {	/* mini2440 + 3.5" TFT + touchscreen */
 		_LCD_DECLARE(
 			7,			/* The 3.5 is quite fast */
@@ -191,7 +191,7 @@ struct s3c2410fb_display mini2440_lcd_cfg[] __initdata = {
 #define S3C2410_GPCCON_MASK(x)	(3 << ((x) * 2))
 #define S3C2410_GPDCON_MASK(x)	(3 << ((x) * 2))
 
-struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
+static struct s3c2410fb_mach_info mini2440_fb_info __initdata = {
 	.displays	 = &mini2440_lcd_cfg[0], /* not constant! see init */
 	.num_displays	 = 1,
 	.default_display = 0,

arch/arm/mach-s3c6400/include/mach/dma.h

@@ -68,6 +68,11 @@ static __inline__ int s3c_dma_has_circular(void)
 
 #define S3C2410_DMAF_CIRCULAR		(1 << 0)
 
+static inline bool s3c_dma_has_circular(void)
+{
+	return false;
+}
+
 #include <plat/dma.h>
 
 #endif /* __ASM_ARCH_IRQ_H */

arch/arm/mm/Kconfig

@@ -122,10 +122,7 @@ config CPU_ARM920T
 	select CPU_TLB_V4WBI if MMU
 	help
 	  The ARM920T is licensed to be produced by numerous vendors,
-	  and is used in the Maverick EP9312 and the Samsung S3C2410.
-
-	  More information on the Maverick EP9312 at
-	  <http://linuxdevices.com/products/PD2382866068.html>.
+	  and is used in the Cirrus EP93xx and the Samsung S3C2410.
 
 	  Say Y if you want support for the ARM920T processor.
 	  Otherwise, say N.

arch/arm/mm/context.c

@@ -50,10 +50,7 @@ void __new_context(struct mm_struct *mm)
 		isb();
 		flush_tlb_all();
 		if (icache_is_vivt_asid_tagged()) {
-			asm("mcr	p15, 0, %0, c7, c5, 0	@ invalidate I-cache\n"
-			    "mcr	p15, 0, %0, c7, c5, 6	@ flush BTAC/BTB\n"
-			    :
-			    : "r" (0));
+			__flush_icache_all();
 			dsb();
 		}
 	}

arch/arm/mm/dma-mapping.c

@@ -205,7 +205,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 
 	order = get_order(size);
 
-	if (mask != 0xffffffff)
+	if (mask < 0xffffffffULL)
 		gfp |= GFP_DMA;
 
 	page = alloc_pages(gfp, order);
@@ -289,7 +289,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	if (!mask)
 		goto error;
 
-	if (mask != 0xffffffff)
+	if (mask < 0xffffffffULL)
 		gfp |= GFP_DMA;
 	virt = kmalloc(size, gfp);
 	if (!virt)

arch/arm/mm/flush.c

@@ -18,10 +18,6 @@
 
 #include "mm.h"
 
-#ifdef CONFIG_ARM_ERRATA_411920
-extern void v6_icache_inval_all(void);
-#endif
-
 #ifdef CONFIG_CPU_CACHE_VIPT
 
 #define ALIAS_FLUSH_START	0xffff4000
@@ -35,16 +31,11 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 	flush_tlb_kernel_page(to);
 
 	asm(	"mcrr	p15, 0, %1, %0, c14\n"
-	"	mcr	p15, 0, %2, c7, c10, 4\n"
-#ifndef CONFIG_ARM_ERRATA_411920
-	"	mcr	p15, 0, %2, c7, c5, 0\n"
-#endif
+	"	mcr	p15, 0, %2, c7, c10, 4"
 	    :
 	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
 	    : "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
-	v6_icache_inval_all();
-#endif
+	__flush_icache_all();
 }
 
 void flush_cache_mm(struct mm_struct *mm)
@@ -57,16 +48,11 @@ void flush_cache_mm(struct mm_struct *mm)
 
 	if (cache_is_vipt_aliasing()) {
 		asm(	"mcr	p15, 0, %0, c7, c14, 0\n"
-		"	mcr	p15, 0, %0, c7, c10, 4\n"
-#ifndef CONFIG_ARM_ERRATA_411920
-		"	mcr	p15, 0, %0, c7, c5, 0\n"
-#endif
+		"	mcr	p15, 0, %0, c7, c10, 4"
 		    :
 		    : "r" (0)
 		    : "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
-		v6_icache_inval_all();
-#endif
+		__flush_icache_all();
 	}
 }
 
@@ -81,16 +67,11 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 
 	if (cache_is_vipt_aliasing()) {
 		asm(	"mcr	p15, 0, %0, c7, c14, 0\n"
-		"	mcr	p15, 0, %0, c7, c10, 4\n"
-#ifndef CONFIG_ARM_ERRATA_411920
-		"	mcr	p15, 0, %0, c7, c5, 0\n"
-#endif
+		"	mcr	p15, 0, %0, c7, c10, 4"
 		    :
 		    : "r" (0)
 		    : "cc");
-#ifdef CONFIG_ARM_ERRATA_411920
-		v6_icache_inval_all();
-#endif
+		__flush_icache_all();
 	}
 }
 

arch/arm/mm/init.c

@@ -273,7 +273,6 @@ static void __init bootmem_init_node(int node, struct meminfo *mi,
 		struct membank *bank = &mi->bank[i];
 		if (!bank->highmem)
 			free_bootmem_node(pgdat, bank_phys_start(bank), bank_phys_size(bank));
-		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
 	}
 
 	/*
@@ -370,6 +369,19 @@ int pfn_valid(unsigned long pfn)
 	return 0;
 }
 EXPORT_SYMBOL(pfn_valid);
+
+static void arm_memory_present(struct meminfo *mi, int node)
+{
+}
+#else
+static void arm_memory_present(struct meminfo *mi, int node)
+{
+	int i;
+	for_each_nodebank(i, mi, node) {
+		struct membank *bank = &mi->bank[i];
+		memory_present(node, bank_pfn_start(bank), bank_pfn_end(bank));
+	}
+}
 #endif
 
 static int __init meminfo_cmp(const void *_a, const void *_b)
@@ -427,6 +439,12 @@ void __init bootmem_init(void)
 		 */
 		if (node == initrd_node)
 			bootmem_reserve_initrd(node);
+
+		/*
+		 * Sparsemem tries to allocate bootmem in memory_present(),
+		 * so must be done after the fixed reservations
+		 */
+		arm_memory_present(mi, node);
 	}
 
 	/*

arch/arm/mm/mmu.c

@@ -117,6 +117,13 @@ static void __init early_cachepolicy(char **p)
 	}
 	if (i == ARRAY_SIZE(cache_policies))
 		printk(KERN_ERR "ERROR: unknown or unsupported cache policy\n");
+	/*
+	 * This restriction is partly to do with the way we boot; it is
+	 * unpredictable to have memory mapped using two different sets of
+	 * memory attributes (shared, type, and cache attribs).  We can not
+	 * change these attributes once the initial assembly has setup the
+	 * page tables.
+	 */
 	if (cpu_architecture() >= CPU_ARCH_ARMv6) {
 		printk(KERN_WARNING "Only cachepolicy=writeback supported on ARMv6 and later\n");
 		cachepolicy = CPOLICY_WRITEBACK;

arch/arm/mm/proc-v6.S

@@ -32,8 +32,10 @@
 
 #ifndef CONFIG_SMP
 #define TTB_FLAGS	TTB_RGN_WBWA
+#define PMD_FLAGS	PMD_SECT_WB
 #else
 #define TTB_FLAGS	TTB_RGN_WBWA|TTB_S
+#define PMD_FLAGS	PMD_SECT_WBWA|PMD_SECT_S
 #endif
 
 ENTRY(cpu_v6_proc_init)
@@ -222,10 +224,9 @@ __v6_proc_info:
 	.long	0x0007b000
 	.long	0x0007f000
 	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \

arch/arm/mm/proc-v7.S

@@ -33,9 +33,11 @@
 #ifndef CONFIG_SMP
 /* PTWs cacheable, inner WB not shareable, outer WB not shareable */
 #define TTB_FLAGS	TTB_IRGN_WB|TTB_RGN_OC_WB
+#define PMD_FLAGS	PMD_SECT_WB
 #else
 /* PTWs cacheable, inner WBWA shareable, outer WBWA not shareable */
 #define TTB_FLAGS	TTB_IRGN_WBWA|TTB_S|TTB_NOS|TTB_RGN_OC_WBWA
+#define PMD_FLAGS	PMD_SECT_WBWA|PMD_SECT_S
 #endif
 
 ENTRY(cpu_v7_proc_init)
@@ -326,10 +328,9 @@ __v7_proc_info:
 	.long	0x000f0000		@ Required ID value
 	.long	0x000f0000		@ Mask for ID
 	.long   PMD_TYPE_SECT | \
-		PMD_SECT_BUFFERABLE | \
-		PMD_SECT_CACHEABLE | \
 		PMD_SECT_AP_WRITE | \
-		PMD_SECT_AP_READ
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS
 	.long   PMD_TYPE_SECT | \
 		PMD_SECT_XN | \
 		PMD_SECT_AP_WRITE | \

arch/arm/oprofile/op_model_v6.c

@@ -33,6 +33,9 @@ static int irqs[] = {
 #ifdef CONFIG_ARCH_OMAP2
 	3,
 #endif
+#ifdef CONFIG_ARCH_BCMRING
+	IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
+#endif
 };
 
 static void armv6_pmu_stop(void)

arch/arm/plat-omap/dma.c

@@ -978,6 +978,14 @@ void omap_stop_dma(int lch)
 {
 	u32 l;
 
+	/* Disable all interrupts on the channel */
+	if (cpu_class_is_omap1())
+		dma_write(0, CICR(lch));
+
+	l = dma_read(CCR(lch));
+	l &= ~OMAP_DMA_CCR_EN;
+	dma_write(l, CCR(lch));
+
 	if (!omap_dma_in_1510_mode() && dma_chan[lch].next_lch != -1) {
 		int next_lch, cur_lch = lch;
 		char dma_chan_link_map[OMAP_DMA4_LOGICAL_DMA_CH_COUNT];
@@ -995,18 +1003,8 @@ void omap_stop_dma(int lch)
 			next_lch = dma_chan[cur_lch].next_lch;
 			cur_lch = next_lch;
 		} while (next_lch != -1);
-
-		return;
 	}
 
-	/* Disable all interrupts on the channel */
-	if (cpu_class_is_omap1())
-		dma_write(0, CICR(lch));
-
-	l = dma_read(CCR(lch));
-	l &= ~OMAP_DMA_CCR_EN;
-	dma_write(l, CCR(lch));
-
 	dma_chan[lch].flags &= ~OMAP_DMA_ACTIVE;
 }
 EXPORT_SYMBOL(omap_stop_dma);

arch/arm/plat-omap/include/mach/keypad.h

@@ -10,7 +10,7 @@
 #ifndef ASMARM_ARCH_KEYPAD_H
 #define ASMARM_ARCH_KEYPAD_H
 
-#include <linux/input/matrix_keypad.h>
+#warning: Please update the board to use matrix_keypad.h instead
 
 struct omap_kp_platform_data {
 	int rows;
@@ -37,6 +37,9 @@ struct omap_kp_platform_data {
 
 #define KEY_PERSISTENT		0x00800000
 #define KEYNUM_MASK		0x00EFFFFF
+#define KEY(col, row, val) (((col) << 28) | ((row) << 24) | (val))
+#define PERSISTENT_KEY(col, row) (((col) << 28) | ((row) << 24) | \
+						KEY_PERSISTENT)
 
 #endif
 

arch/arm/plat-omap/iommu.c

@@ -664,7 +664,7 @@ static size_t iopgtable_clear_entry_core(struct iommu *obj, u32 da)
 		nent = 1; /* for the next L1 entry */
 	} else {
 		bytes = IOPGD_SIZE;
-		if (*iopgd & IOPGD_SUPER) {
+		if ((*iopgd & IOPGD_SUPER) == IOPGD_SUPER) {
 			nent *= 16;
 			/* rewind to the 1st entry */
 			iopgd = (u32 *)((u32)iopgd & IOSUPER_MASK);

arch/arm/plat-s3c24xx/adc.c

@@ -189,7 +189,7 @@ int s3c_adc_read(struct s3c_adc_client *client, unsigned int ch)
 err:
 	return ret;
 }
-EXPORT_SYMBOL_GPL(s3c_adc_convert);
+EXPORT_SYMBOL_GPL(s3c_adc_read);
 
 static void s3c_adc_default_select(struct s3c_adc_client *client,
 				   unsigned select)

arch/arm/plat-s3c24xx/cpu.c

@@ -61,6 +61,7 @@ static const char name_s3c2410[]  = "S3C2410";
 static const char name_s3c2412[]  = "S3C2412";
 static const char name_s3c2440[]  = "S3C2440";
 static const char name_s3c2442[]  = "S3C2442";
+static const char name_s3c2442b[]  = "S3C2442B";
 static const char name_s3c2443[]  = "S3C2443";
 static const char name_s3c2410a[] = "S3C2410A";
 static const char name_s3c2440a[] = "S3C2440A";
@@ -111,6 +112,15 @@ static struct cpu_table cpu_ids[] __initdata = {
 		.init		= s3c2442_init,
 		.name		= name_s3c2442
 	},
+	{
+		.idcode		= 0x32440aab,
+		.idmask		= 0xffffffff,
+		.map_io		= s3c244x_map_io,
+		.init_clocks	= s3c244x_init_clocks,
+		.init_uarts	= s3c244x_init_uarts,
+		.init		= s3c2442_init,
+		.name		= name_s3c2442b
+	},
 	{
 		.idcode		= 0x32412001,
 		.idmask		= 0xffffffff,

arch/arm/plat-s3c24xx/dma.c

@@ -208,14 +208,14 @@ s3c2410_dma_loadbuffer(struct s3c2410_dma_chan *chan,
 {
 	unsigned long reload;
 
-	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
-		 buf, (unsigned long)buf->data, buf->size);
-
 	if (buf == NULL) {
 		dmawarn("buffer is NULL\n");
 		return -EINVAL;
 	}
 
+	pr_debug("s3c2410_chan_loadbuffer: loading buff %p (0x%08lx,0x%06x)\n",
+		 buf, (unsigned long)buf->data, buf->size);
+
 	/* check the state of the channel before we do anything */
 
 	if (chan->load_state == S3C2410_DMALOAD_1LOADED) {

arch/arm/plat-s3c24xx/gpio.c

@@ -29,6 +29,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
+#include <mach/gpio-fns.h>
 #include <asm/irq.h>
 
 #include <mach/regs-gpio.h>

arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h

@@ -222,7 +222,9 @@ extern struct clk *s3c_cpufreq_clk_get(struct device *, const char *);
 /* S3C2410 and compatible exported functions */
 
 extern void s3c2410_cpufreq_setrefresh(struct s3c_cpufreq_config *cfg);
+extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
 
+#ifdef CONFIG_S3C2410_IOTIMING
 extern int s3c2410_iotiming_calc(struct s3c_cpufreq_config *cfg,
 				 struct s3c_iotimings *iot);
 
@@ -231,8 +233,11 @@ extern int s3c2410_iotiming_get(struct s3c_cpufreq_config *cfg,
 
 extern void s3c2410_iotiming_set(struct s3c_cpufreq_config *cfg,
 				 struct s3c_iotimings *iot);
-
-extern void s3c2410_set_fvco(struct s3c_cpufreq_config *cfg);
+#else
+#define s3c2410_iotiming_calc NULL
+#define s3c2410_iotiming_get NULL
+#define s3c2410_iotiming_set NULL
+#endif /* CONFIG_S3C2410_IOTIMING */
 
 /* S3C2412 compatible routines */
 

arch/arm/plat-s3c24xx/include/plat/s3c2410.h

@@ -27,6 +27,7 @@ extern void s3c2410_init_clocks(int xtal);
 #define s3c2410_init_uarts NULL
 #define s3c2410_map_io NULL
 #define s3c2410_init NULL
+#define s3c2410a_init NULL
 #endif
 
 extern int s3c2410_baseclk_add(void);

arch/arm/plat-s3c64xx/include/plat/regs-clock.h

@@ -51,8 +51,8 @@
 #define S3C6400_CLKDIV0_HCLK_SHIFT	(8)
 #define S3C6400_CLKDIV0_MPLL_MASK	(0x1 << 4)
 #define S3C6400_CLKDIV0_MPLL_SHIFT	(4)
-#define S3C6400_CLKDIV0_ARM_MASK	(0x3 << 0)
-#define S3C6410_CLKDIV0_ARM_MASK	(0x7 << 0)
+#define S3C6400_CLKDIV0_ARM_MASK	(0x7 << 0)
+#define S3C6410_CLKDIV0_ARM_MASK	(0xf << 0)
 #define S3C6400_CLKDIV0_ARM_SHIFT	(0)
 
 /* CLKDIV1 */

arch/arm/plat-s3c64xx/s3c6400-clock.c

@@ -677,6 +677,9 @@ void __init_or_cpufreq s3c6400_setup_clocks(void)
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
+	/* For now assume the mux always selects the crystal */
+	clk_ext_xtal_mux.parent = xtal_clk;
+
 	epll = s3c6400_get_epll(xtal);
 	mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON));
 	apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON));

arch/avr32/mach-at32ap/include/mach/cpu.h

@@ -31,5 +31,8 @@
 #define cpu_is_at91sam9263()	(0)
 #define cpu_is_at91sam9rl()	(0)
 #define cpu_is_at91cap9()	(0)
+#define cpu_is_at91sam9g10()	(0)
+#define cpu_is_at91sam9g45()	(0)
+#define cpu_is_at91sam9g45es()	(0)
 
 #endif /* __ASM_ARCH_CPU_H */

arch/frv/kernel/signal.c

@@ -527,7 +527,7 @@ static void do_signal(void)
 
 no_signal:
 	/* Did we come from a system call? */
-	if (__frame->syscallno >= 0) {
+	if (__frame->syscallno != -1) {
 		/* Restart the system call - no handlers present */
 		switch (__frame->gr8) {
 		case -ERESTARTNOHAND:

arch/ia64/include/asm/spinlock.h

@@ -25,61 +25,82 @@
  * by atomically noting the tail and incrementing it by one (thus adding
  * ourself to the queue and noting our position), then waiting until the head
  * becomes equal to the the initial value of the tail.
+ * The pad bits in the middle are used to prevent the next_ticket number
+ * overflowing into the now_serving number.
  *
- *   63                     32  31                      0
+ *   31             17  16    15  14                    0
  *  +----------------------------------------------------+
- *  |  next_ticket_number      |     now_serving         |
+ *  |  now_serving     | padding |   next_ticket         |
  *  +----------------------------------------------------+
  */
 
-#define TICKET_SHIFT	32
+#define TICKET_SHIFT	17
+#define TICKET_BITS	15
+#define	TICKET_MASK	((1 << TICKET_BITS) - 1)
 
 static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock)
 {
-	int	*p = (int *)&lock->lock, turn, now_serving;
+	int	*p = (int *)&lock->lock, ticket, serve;
 
-	now_serving = *p;
-	turn = ia64_fetchadd(1, p+1, acq);
+	ticket = ia64_fetchadd(1, p, acq);
 
-	if (turn == now_serving)
+	if (!(((ticket >> TICKET_SHIFT) ^ ticket) & TICKET_MASK))
 		return;
 
-	do {
+	ia64_invala();
+
+	for (;;) {
+		asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(p) : "memory");
+
+		if (!(((serve >> TICKET_SHIFT) ^ ticket) & TICKET_MASK))
+			return;
 		cpu_relax();
-	} while (ACCESS_ONCE(*p) != turn);
+	}
 }
 
 static __always_inline int __ticket_spin_trylock(raw_spinlock_t *lock)
 {
-	long tmp = ACCESS_ONCE(lock->lock), try;
-
-	if (!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1))) {
-		try = tmp + (1L << TICKET_SHIFT);
+	int tmp = ACCESS_ONCE(lock->lock);
 
-		return ia64_cmpxchg(acq, &lock->lock, tmp, try, sizeof (tmp)) == tmp;
-	}
+	if (!(((tmp >> TICKET_SHIFT) ^ tmp) & TICKET_MASK))
+		return ia64_cmpxchg(acq, &lock->lock, tmp, tmp + 1, sizeof (tmp)) == tmp;
 	return 0;
 }
 
 static __always_inline void __ticket_spin_unlock(raw_spinlock_t *lock)
 {
-	int	*p = (int *)&lock->lock;
+	unsigned short	*p = (unsigned short *)&lock->lock + 1, tmp;
 
-	(void)ia64_fetchadd(1, p, rel);
+	asm volatile ("ld2.bias %0=[%1]" : "=r"(tmp) : "r"(p));
+	ACCESS_ONCE(*p) = (tmp + 2) & ~1;
+}
+
+static __always_inline void __ticket_spin_unlock_wait(raw_spinlock_t *lock)
+{
+	int	*p = (int *)&lock->lock, ticket;
+
+	ia64_invala();
+
+	for (;;) {
+		asm volatile ("ld4.c.nc %0=[%1]" : "=r"(ticket) : "r"(p) : "memory");
+		if (!(((ticket >> TICKET_SHIFT) ^ ticket) & TICKET_MASK))
+			return;
+		cpu_relax();
+	}
 }
 
 static inline int __ticket_spin_is_locked(raw_spinlock_t *lock)
 {
 	long tmp = ACCESS_ONCE(lock->lock);
 
-	return !!(((tmp >> TICKET_SHIFT) ^ tmp) & ((1L << TICKET_SHIFT) - 1));
+	return !!(((tmp >> TICKET_SHIFT) ^ tmp) & TICKET_MASK);
 }
 
 static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
 {
 	long tmp = ACCESS_ONCE(lock->lock);
 
-	return (((tmp >> TICKET_SHIFT) - tmp) & ((1L << TICKET_SHIFT) - 1)) > 1;
+	return ((tmp - (tmp >> TICKET_SHIFT)) & TICKET_MASK) > 1;
 }
 
 static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
@@ -116,8 +137,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
 
 static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
 {
-	while (__raw_spin_is_locked(lock))
-		cpu_relax();
+	__ticket_spin_unlock_wait(lock);
 }
 
 #define __raw_read_can_lock(rw)		(*(volatile int *)(rw) >= 0)

arch/ia64/include/asm/spinlock_types.h

@@ -6,7 +6,7 @@
 #endif
 
 typedef struct {
-	volatile unsigned long lock;
+	volatile unsigned int lock;
 } raw_spinlock_t;
 
 #define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }

arch/ia64/kernel/mca.c

@@ -887,6 +887,60 @@ ia64_mca_modify_comm(const struct task_struct *previous_current)
 	memcpy(current->comm, comm, sizeof(current->comm));
 }
 
+static void
+finish_pt_regs(struct pt_regs *regs, const pal_min_state_area_t *ms,
+		unsigned long *nat)
+{
+	const u64 *bank;
+
+	/* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use
+	 * pmsa_{xip,xpsr,xfs}
+	 */
+	if (ia64_psr(regs)->ic) {
+		regs->cr_iip = ms->pmsa_iip;
+		regs->cr_ipsr = ms->pmsa_ipsr;
+		regs->cr_ifs = ms->pmsa_ifs;
+	} else {
+		regs->cr_iip = ms->pmsa_xip;
+		regs->cr_ipsr = ms->pmsa_xpsr;
+		regs->cr_ifs = ms->pmsa_xfs;
+	}
+	regs->pr = ms->pmsa_pr;
+	regs->b0 = ms->pmsa_br0;
+	regs->ar_rsc = ms->pmsa_rsc;
+	copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, &regs->r1, nat);
+	copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, &regs->r2, nat);
+	copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, &regs->r3, nat);
+	copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, &regs->r8, nat);
+	copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, &regs->r9, nat);
+	copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, &regs->r10, nat);
+	copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, &regs->r11, nat);
+	copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, &regs->r12, nat);
+	copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, &regs->r13, nat);
+	copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, &regs->r14, nat);
+	copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, &regs->r15, nat);
+	if (ia64_psr(regs)->bn)
+		bank = ms->pmsa_bank1_gr;
+	else
+		bank = ms->pmsa_bank0_gr;
+	copy_reg(&bank[16-16], ms->pmsa_nat_bits, &regs->r16, nat);
+	copy_reg(&bank[17-16], ms->pmsa_nat_bits, &regs->r17, nat);
+	copy_reg(&bank[18-16], ms->pmsa_nat_bits, &regs->r18, nat);
+	copy_reg(&bank[19-16], ms->pmsa_nat_bits, &regs->r19, nat);
+	copy_reg(&bank[20-16], ms->pmsa_nat_bits, &regs->r20, nat);
+	copy_reg(&bank[21-16], ms->pmsa_nat_bits, &regs->r21, nat);
+	copy_reg(&bank[22-16], ms->pmsa_nat_bits, &regs->r22, nat);
+	copy_reg(&bank[23-16], ms->pmsa_nat_bits, &regs->r23, nat);
+	copy_reg(&bank[24-16], ms->pmsa_nat_bits, &regs->r24, nat);
+	copy_reg(&bank[25-16], ms->pmsa_nat_bits, &regs->r25, nat);
+	copy_reg(&bank[26-16], ms->pmsa_nat_bits, &regs->r26, nat);
+	copy_reg(&bank[27-16], ms->pmsa_nat_bits, &regs->r27, nat);
+	copy_reg(&bank[28-16], ms->pmsa_nat_bits, &regs->r28, nat);
+	copy_reg(&bank[29-16], ms->pmsa_nat_bits, &regs->r29, nat);
+	copy_reg(&bank[30-16], ms->pmsa_nat_bits, &regs->r30, nat);
+	copy_reg(&bank[31-16], ms->pmsa_nat_bits, &regs->r31, nat);
+}
+
 /* On entry to this routine, we are running on the per cpu stack, see
  * mca_asm.h.  The original stack has not been touched by this event.  Some of
  * the original stack's registers will be in the RBS on this stack.  This stack
@@ -921,7 +975,6 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
 	u64 r12 = ms->pmsa_gr[12-1], r13 = ms->pmsa_gr[13-1];
 	u64 ar_bspstore = regs->ar_bspstore;
 	u64 ar_bsp = regs->ar_bspstore + (loadrs >> 16);
-	const u64 *bank;
 	const char *msg;
 	int cpu = smp_processor_id();
 
@@ -1024,54 +1077,9 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
 	p = (char *)r12 - sizeof(*regs);
 	old_regs = (struct pt_regs *)p;
 	memcpy(old_regs, regs, sizeof(*regs));
-	/* If ipsr.ic then use pmsa_{iip,ipsr,ifs}, else use
-	 * pmsa_{xip,xpsr,xfs}
-	 */
-	if (ia64_psr(regs)->ic) {
-		old_regs->cr_iip = ms->pmsa_iip;
-		old_regs->cr_ipsr = ms->pmsa_ipsr;
-		old_regs->cr_ifs = ms->pmsa_ifs;
-	} else {
-		old_regs->cr_iip = ms->pmsa_xip;
-		old_regs->cr_ipsr = ms->pmsa_xpsr;
-		old_regs->cr_ifs = ms->pmsa_xfs;
-	}
-	old_regs->pr = ms->pmsa_pr;
-	old_regs->b0 = ms->pmsa_br0;
 	old_regs->loadrs = loadrs;
-	old_regs->ar_rsc = ms->pmsa_rsc;
 	old_unat = old_regs->ar_unat;
-	copy_reg(&ms->pmsa_gr[1-1], ms->pmsa_nat_bits, &old_regs->r1, &old_unat);
-	copy_reg(&ms->pmsa_gr[2-1], ms->pmsa_nat_bits, &old_regs->r2, &old_unat);
-	copy_reg(&ms->pmsa_gr[3-1], ms->pmsa_nat_bits, &old_regs->r3, &old_unat);
-	copy_reg(&ms->pmsa_gr[8-1], ms->pmsa_nat_bits, &old_regs->r8, &old_unat);
-	copy_reg(&ms->pmsa_gr[9-1], ms->pmsa_nat_bits, &old_regs->r9, &old_unat);
-	copy_reg(&ms->pmsa_gr[10-1], ms->pmsa_nat_bits, &old_regs->r10, &old_unat);
-	copy_reg(&ms->pmsa_gr[11-1], ms->pmsa_nat_bits, &old_regs->r11, &old_unat);
-	copy_reg(&ms->pmsa_gr[12-1], ms->pmsa_nat_bits, &old_regs->r12, &old_unat);
-	copy_reg(&ms->pmsa_gr[13-1], ms->pmsa_nat_bits, &old_regs->r13, &old_unat);
-	copy_reg(&ms->pmsa_gr[14-1], ms->pmsa_nat_bits, &old_regs->r14, &old_unat);
-	copy_reg(&ms->pmsa_gr[15-1], ms->pmsa_nat_bits, &old_regs->r15, &old_unat);
-	if (ia64_psr(old_regs)->bn)
-		bank = ms->pmsa_bank1_gr;
-	else
-		bank = ms->pmsa_bank0_gr;
-	copy_reg(&bank[16-16], ms->pmsa_nat_bits, &old_regs->r16, &old_unat);
-	copy_reg(&bank[17-16], ms->pmsa_nat_bits, &old_regs->r17, &old_unat);
-	copy_reg(&bank[18-16], ms->pmsa_nat_bits, &old_regs->r18, &old_unat);
-	copy_reg(&bank[19-16], ms->pmsa_nat_bits, &old_regs->r19, &old_unat);
-	copy_reg(&bank[20-16], ms->pmsa_nat_bits, &old_regs->r20, &old_unat);
-	copy_reg(&bank[21-16], ms->pmsa_nat_bits, &old_regs->r21, &old_unat);
-	copy_reg(&bank[22-16], ms->pmsa_nat_bits, &old_regs->r22, &old_unat);
-	copy_reg(&bank[23-16], ms->pmsa_nat_bits, &old_regs->r23, &old_unat);
-	copy_reg(&bank[24-16], ms->pmsa_nat_bits, &old_regs->r24, &old_unat);
-	copy_reg(&bank[25-16], ms->pmsa_nat_bits, &old_regs->r25, &old_unat);
-	copy_reg(&bank[26-16], ms->pmsa_nat_bits, &old_regs->r26, &old_unat);
-	copy_reg(&bank[27-16], ms->pmsa_nat_bits, &old_regs->r27, &old_unat);
-	copy_reg(&bank[28-16], ms->pmsa_nat_bits, &old_regs->r28, &old_unat);
-	copy_reg(&bank[29-16], ms->pmsa_nat_bits, &old_regs->r29, &old_unat);
-	copy_reg(&bank[30-16], ms->pmsa_nat_bits, &old_regs->r30, &old_unat);
-	copy_reg(&bank[31-16], ms->pmsa_nat_bits, &old_regs->r31, &old_unat);
+	finish_pt_regs(old_regs, ms, &old_unat);
 
 	/* Next stack a struct switch_stack.  mca_asm.S built a partial
 	 * switch_stack, copy it and fill in the blanks using pt_regs and
@@ -1141,6 +1149,8 @@ ia64_mca_modify_original_stack(struct pt_regs *regs,
 no_mod:
 	mprintk(KERN_INFO "cpu %d, %s %s, original stack not modified\n",
 			smp_processor_id(), type, msg);
+	old_unat = regs->ar_unat;
+	finish_pt_regs(regs, ms, &old_unat);
 	return previous_current;
 }
 

arch/ia64/kernel/unaligned.c

@@ -60,7 +60,6 @@ dump (const char *str, void *vp, size_t len)
  */
 int no_unaligned_warning;
 int unaligned_dump_stack;
-static int noprint_warning;
 
 /*
  * For M-unit:
@@ -1357,9 +1356,8 @@ ia64_handle_unaligned (unsigned long ifa, struct pt_regs *regs)
 			/* watch for command names containing %s */
 			printk(KERN_WARNING "%s", buf);
 		} else {
-			if (no_unaligned_warning && !noprint_warning) {
-				noprint_warning = 1;
-				printk(KERN_WARNING "%s(%d) encountered an "
+			if (no_unaligned_warning) {
+				printk_once(KERN_WARNING "%s(%d) encountered an "
 				       "unaligned exception which required\n"
 				       "kernel assistance, which degrades "
 				       "the performance of the application.\n"

arch/ia64/mm/tlb.c

@@ -100,24 +100,36 @@ wrap_mmu_context (struct mm_struct *mm)
  * this primitive it can be moved up to a spinaphore.h header.
  */
 struct spinaphore {
-	atomic_t	cur;
+	unsigned long	ticket;
+	unsigned long	serve;
 };
 
 static inline void spinaphore_init(struct spinaphore *ss, int val)
 {
-	atomic_set(&ss->cur, val);
+	ss->ticket = 0;
+	ss->serve = val;
 }
 
 static inline void down_spin(struct spinaphore *ss)
 {
-	while (unlikely(!atomic_add_unless(&ss->cur, -1, 0)))
-		while (atomic_read(&ss->cur) == 0)
-			cpu_relax();
+	unsigned long t = ia64_fetchadd(1, &ss->ticket, acq), serve;
+
+	if (time_before(t, ss->serve))
+		return;
+
+	ia64_invala();
+
+	for (;;) {
+		asm volatile ("ld4.c.nc %0=[%1]" : "=r"(serve) : "r"(&ss->serve) : "memory");
+		if (time_before(t, serve))
+			return;
+		cpu_relax();
+	}
 }
 
 static inline void up_spin(struct spinaphore *ss)
 {
-	atomic_add(1, &ss->cur);
+	ia64_fetchadd(1, &ss->serve, rel);
 }
 
 static struct spinaphore ptcg_sem;