Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 大约 4 年

通知 14
Star 8
Fork 2
K
kernel_linux
提交 b5153163 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm 

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (278 commits)
  arm: remove machine_desc.io_pg_offst and .phys_io
  arm: use addruart macro to establish debug mappings
  arm: return both physical and virtual addresses from addruart
  arm/debug: consolidate addruart macros for CONFIG_DEBUG_ICEDCC
  ARM: make struct machine_desc definition coherent with its comment
  eukrea_mbimxsd-baseboard: Pass the correct GPIO to gpio_free
  cpuimx27: fix compile when ULPI is selected
  mach-pcm037_eet: fix compile errors
  Fixing ethernet driver compilation error for i.MX31 ADS board
  cpuimx51: update board support
  mx5: add cpuimx51sd module and its baseboard
  iomux-mx51: fix GPIO_1_xx 's IOMUX configuration
  imx-esdhc: update devices registration
  mx51: add resources for SD/MMC on i.MX51
  iomux-mx51: fix SD1 and SD2's iomux configuration
  clock-mx51: rename CLOCK1 to CLOCK_CCGR for better readability
  clock-mx51: factorize clk_set_parent and clk_get_rate
  eukrea_mbimxsd: add support for DVI displays
  cpuimx25 & cpuimx35: fix OTG port registration in host mode
  i.MX31 and i.MX35 : fix errate TLSbo65953 and ENGcm09472
  ...
上级 a8cbf225 6451d778
展开全部 隐藏空白更改
内联 并排
Showing with 25244 addition and 5160 deletion
Documentation/arm/00-INDEX
浏览文件 @ b5153163
......@@ -6,6 +6,8 @@ Interrupts
- ARM Interrupt subsystem documentation
IXP2000
- Release Notes for Linux on Intel's IXP2000 Network Processor
msm
- MSM specific documentation
Netwinder
- Netwinder specific documentation
Porting
......
Documentation/arm/msm/gpiomux.txt 0 → 100644
浏览文件 @ b5153163
This document provides an overview of the msm_gpiomux interface, which
is used to provide gpio pin multiplexing and configuration on mach-msm
targets.
History
=======
The first-generation API for gpio configuration & multiplexing on msm
is the function gpio_tlmm_config(). This function has a few notable
shortcomings, which led to its deprecation and replacement by gpiomux:
The 'disable' parameter: Setting the second parameter to
gpio_tlmm_config to GPIO_CFG_DISABLE tells the peripheral
processor in charge of the subsystem to perform a look-up into a
low-power table and apply the low-power/sleep setting for the pin.
As the msm family evolved this became problematic. Not all pins
have sleep settings, not all peripheral processors will accept requests
to apply said sleep settings, and not all msm targets have their gpio
subsystems managed by a peripheral processor. In order to get consistent
behavior on all targets, drivers are forced to ignore this parameter,
rendering it useless.
The 'direction' flag: for all mux-settings other than raw-gpio (0),
the output-enable bit of a gpio is hard-wired to a known
input (usually VDD or ground). For those settings, the direction flag
is meaningless at best, and deceptive at worst. In addition, using the
direction flag to change output-enable (OE) directly can cause trouble in
gpiolib, which has no visibility into gpio direction changes made
in this way. Direction control in gpio mode should be made through gpiolib.
Key Features of gpiomux
=======================
- A consistent interface across all generations of msm. Drivers can expect
the same results on every target.
- gpiomux plays nicely with gpiolib. Functions that should belong to gpiolib
are left to gpiolib and not duplicated here. gpiomux is written with the
intent that gpio_chips will call gpiomux reference-counting methods
from their request() and free() hooks, providing full integration.
- Tabular configuration. Instead of having to call gpio_tlmm_config
hundreds of times, gpio configuration is placed in a single table.
- Per-gpio sleep. Each gpio is individually reference counted, allowing only
those lines which are in use to be put in high-power states.
- 0 means 'do nothing': all flags are designed so that the default memset-zero
equates to a sensible default of 'no configuration', preventing users
from having to provide hundreds of 'no-op' configs for unused or
unwanted lines.
Usage
=====
To use gpiomux, provide configuration information for relevant gpio lines
in the msm_gpiomux_configs table. Since a 0 equates to "unconfigured",
only those lines to be managed by gpiomux need to be specified. Here
is a completely fictional example:
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
[12] = {
.active = GPIOMUX_VALID | GPIOMUX_DRV_8MA | GPIOMUX_FUNC_1,
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
[34] = {
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
};
To indicate that a gpio is in use, call msm_gpiomux_get() to increase
its reference count. To decrease the reference count, call msm_gpiomux_put().
The effect of this configuration is as follows:
When the system boots, gpios 12 and 34 will be initialized with their
'suspended' configurations. All other gpios, which were left unconfigured,
will not be touched.
When msm_gpiomux_get() is called on gpio 12 to raise its reference count
above 0, its active configuration will be applied. Since no other gpio
line has a valid active configuration, msm_gpiomux_get() will have no
effect on any other line.
When msm_gpiomux_put() is called on gpio 12 or 34 to drop their reference
count to 0, their suspended configurations will be applied.
Since no other gpio line has a valid suspended configuration, no other
gpio line will be effected by msm_gpiomux_put(). Since gpio 34 has no valid
active configuration, this is effectively a no-op for gpio 34 as well,
with one small caveat, see the section "About Output-Enable Settings".
All of the GPIOMUX_VALID flags may seem like unnecessary overhead, but
they address some important issues. As unused entries (all those
except 12 and 34) are zero-filled, gpiomux needs a way to distinguish
the used fields from the unused. In addition, the all-zero pattern
is a valid configuration! Therefore, gpiomux defines an additional bit
which is used to indicate when a field is used. This has the pleasant
side-effect of allowing calls to msm_gpiomux_write to use '0' to indicate
that a value should not be changed:
msm_gpiomux_write(0, GPIOMUX_VALID, 0);
replaces the active configuration of gpio 0 with an all-zero configuration,
but leaves the suspended configuration as it was.
Static Configurations
=====================
To install a static configuration, which is applied at boot and does
not change after that, install a configuration with a suspended component
but no active component, as in the previous example:
[34] = {
.suspended = GPIOMUX_VALID | GPIOMUX_PULL_DOWN,
},
The suspended setting is applied during boot, and the lack of any valid
active setting prevents any other setting from being applied at runtime.
If other subsystems attempting to access the line is a concern, one could
*really* anchor the configuration down by calling msm_gpiomux_get on the
line at initialization to move the line into active mode. With the line
held, it will never be re-suspended, and with no valid active configuration,
no new configurations will be applied.
But then, if having other subsystems grabbing for the line is truly a concern,
it should be reserved with gpio_request instead, which carries an implicit
msm_gpiomux_get.
gpiomux and gpiolib
===================
It is expected that msm gpio_chips will call msm_gpiomux_get() and
msm_gpiomux_put() from their request and free hooks, like this fictional
example:
static int request(struct gpio_chip *chip, unsigned offset)
{
return msm_gpiomux_get(chip->base + offset);
}
static void free(struct gpio_chip *chip, unsigned offset)
{
msm_gpiomux_put(chip->base + offset);
}
...somewhere in a gpio_chip declaration...
.request = request,
.free = free,
This provides important functionality:
- It guarantees that a gpio line will have its 'active' config applied
when the line is requested, and will not be suspended while the line
remains requested; and
- It guarantees that gpio-direction settings from gpiolib behave sensibly.
See "About Output-Enable Settings."
This mechanism allows for "auto-request" of gpiomux lines via gpiolib
when it is suitable. Drivers wishing more exact control are, of course,
free to also use msm_gpiomux_set and msm_gpiomux_get.
About Output-Enable Settings
============================
Some msm targets do not have the ability to query the current gpio
configuration setting. This means that changes made to the output-enable
(OE) bit by gpiolib cannot be consistently detected and preserved by gpiomux.
Therefore, when gpiomux applies a configuration setting, any direction
settings which may have been applied by gpiolib are lost and the default
input settings are re-applied.
For this reason, drivers should not assume that gpio direction settings
continue to hold if they free and then re-request a gpio. This seems like
common sense - after all, anybody could have obtained the line in the
meantime - but it needs saying.
This also means that calls to msm_gpiomux_write will reset the OE bit,
which means that if the gpio line is held by a client of gpiolib and
msm_gpiomux_write is called, the direction setting has been lost and
gpiolib's internal state has been broken.
Release gpio lines before reconfiguring them.
MAINTAINERS
浏览文件 @ b5153163
......@@ -990,11 +990,23 @@ S: Supported
F: arch/arm/mach-shmobile/
F: drivers/sh/
ARM/TELECHIPS ARM ARCHITECTURE
M: "Hans J. Koch" <hjk@linutronix.de>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/plat-tcc/
F: arch/arm/mach-tcc8k/
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/TETON BGA MACHINE SUPPORT
M: Mark F. Brown <mark.brown314@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
ARM/THECUS N2100 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
......
Makefile
浏览文件 @ b5153163
......@@ -554,8 +554,15 @@ endif
ifdef CONFIG_FRAME_POINTER
KBUILD_CFLAGS += -fno-omit-frame-pointer -fno-optimize-sibling-calls
else
# Some targets (ARM with Thumb2, for example), can't be built with frame
# pointers. For those, we don't have FUNCTION_TRACER automatically
# select FRAME_POINTER. However, FUNCTION_TRACER adds -pg, and this is
# incompatible with -fomit-frame-pointer with current GCC, so we don't use
# -fomit-frame-pointer with FUNCTION_TRACER.
ifndef CONFIG_FUNCTION_TRACER
KBUILD_CFLAGS += -fomit-frame-pointer
endif
endif
ifdef CONFIG_DEBUG_INFO
KBUILD_CFLAGS += -g
......
arch/arm/Kconfig
浏览文件 @ b5153163
......@@ -19,6 +19,8 @@ config ARM
select HAVE_KPROBES if (!XIP_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL)
select HAVE_GENERIC_DMA_COHERENT
select HAVE_KERNEL_GZIP
select HAVE_KERNEL_LZO
......@@ -27,6 +29,7 @@ config ARM
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
......@@ -146,6 +149,9 @@ config ARCH_HAS_CPUFREQ
and that the relevant menu configurations are displayed for
it.
config ARCH_HAS_CPU_IDLE_WAIT
def_bool y
config GENERIC_HWEIGHT
bool
default y
......@@ -511,6 +517,7 @@ config ARCH_MMP
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
help
Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
......@@ -588,6 +595,7 @@ config ARCH_PXA
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
select PLAT_PXA
select SPARSE_IRQ
help
Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
......@@ -679,8 +687,8 @@ config ARCH_S3C64XX
help
Samsung S3C64XX series based systems
config ARCH_S5P6440
bool "Samsung S5P6440"
config ARCH_S5P64X0
bool "Samsung S5P6440 S5P6450"
select CPU_V6
select GENERIC_GPIO
select HAVE_CLK
......@@ -689,7 +697,8 @@ config ARCH_S5P6440
select HAVE_S3C2410_I2C
select HAVE_S3C_RTC
help
Samsung S5P6440 CPU based systems
Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
SMDK6450.
config ARCH_S5P6442
bool "Samsung S5P6442"
......@@ -748,6 +757,15 @@ config ARCH_SHARK
Support for the StrongARM based Digital DNARD machine, also known
as "Shark" (<http://www.shark-linux.de/shark.html>).
config ARCH_TCC_926
bool "Telechips TCC ARM926-based systems"
select CPU_ARM926T
select HAVE_CLK
select COMMON_CLKDEV
select GENERIC_CLOCKEVENTS
help
Support for Telechips TCC ARM926-based systems.
config ARCH_LH7A40X
bool "Sharp LH7A40X"
select CPU_ARM922T
......@@ -916,6 +934,8 @@ source "arch/arm/plat-s5p/Kconfig"
source "arch/arm/plat-spear/Kconfig"
source "arch/arm/plat-tcc/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
source "arch/arm/mach-s3c2410/Kconfig"
......@@ -929,7 +949,7 @@ if ARCH_S3C64XX
source "arch/arm/mach-s3c64xx/Kconfig"
endif
source "arch/arm/mach-s5p6440/Kconfig"
source "arch/arm/mach-s5p64x0/Kconfig"
source "arch/arm/mach-s5p6442/Kconfig"
......@@ -1003,7 +1023,7 @@ endif
config ARM_ERRATA_411920
bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
depends on CPU_V6 && !SMP
depends on CPU_V6
help
Invalidation of the Instruction Cache operation can
fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
......@@ -1182,13 +1202,13 @@ source "kernel/time/Kconfig"
config SMP
bool "Symmetric Multi-Processing (EXPERIMENTAL)"
depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
depends on EXPERIMENTAL
depends on GENERIC_CLOCKEVENTS
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 ||\
ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 ||\
ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4
select HAVE_ARM_SCU
help
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
......@@ -1206,6 +1226,19 @@ config SMP
If you don't know what to do here, say N.
config SMP_ON_UP
bool "Allow booting SMP kernel on uniprocessor systems (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on SMP && !XIP && !THUMB2_KERNEL
default y
help
SMP kernels contain instructions which fail on non-SMP processors.
Enabling this option allows the kernel to modify itself to make
these instructions safe. Disabling it allows about 1K of space
savings.
If you don't know what to do here, say Y.
config HAVE_ARM_SCU
bool
depends on SMP
......@@ -1256,12 +1289,9 @@ config HOTPLUG_CPU
config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4)
depends on SMP
default y
select HAVE_ARM_TWD if ARCH_REALVIEW || ARCH_OMAP4 || ARCH_S5PV310 || \
ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS
select HAVE_ARM_TWD
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
......@@ -1272,7 +1302,7 @@ source kernel/Kconfig.preempt
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P6440 || \
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
......@@ -1478,6 +1508,20 @@ config UACCESS_WITH_MEMCPY
However, if the CPU data cache is using a write-allocate mode,
this option is unlikely to provide any performance gain.
config SECCOMP
bool
prompt "Enable seccomp to safely compute untrusted bytecode"
---help---
This kernel feature is useful for number crunching applications
that may need to compute untrusted bytecode during their
execution. By using pipes or other transports made available to
the process as file descriptors supporting the read/write
syscalls, it's possible to isolate those applications in
their own address space using seccomp. Once seccomp is
enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
and the task is only allowed to execute a few safe syscalls
defined by each seccomp mode.
config CC_STACKPROTECTOR
bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)"
help
......
arch/arm/Kconfig.debug
浏览文件 @ b5153163
......@@ -2,6 +2,20 @@ menu "Kernel hacking"
source "lib/Kconfig.debug"
config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU
---help---
If this option is disabled, you allow userspace (root) access to all
of memory, including kernel and userspace memory. Accidental
access to this is obviously disastrous, but specific access can
be used by people debugging the kernel.
If this option is switched on, the /dev/mem file only allows
userspace access to memory mapped peripherals.
If in doubt, say Y.
# RMK wants arm kernels compiled with frame pointers or stack unwinding.
# If you know what you are doing and are willing to live without stack
# traces, you can get a slightly smaller kernel by setting this option to
......@@ -27,6 +41,11 @@ config ARM_UNWIND
the performance is not affected. Currently, this feature
only works with EABI compilers. If unsure say Y.
config OLD_MCOUNT
bool
depends on FUNCTION_TRACER && FRAME_POINTER
default y
config DEBUG_USER
bool "Verbose user fault messages"
help
......
arch/arm/Makefile
浏览文件 @ b5153163
......@@ -173,7 +173,7 @@ machine-$(CONFIG_ARCH_RPC) := rpc
machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443
machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0
machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx
machine-$(CONFIG_ARCH_S5P6440) := s5p6440
machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
......@@ -183,6 +183,7 @@ machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
machine-$(CONFIG_ARCH_STMP378X) := stmp378x
machine-$(CONFIG_ARCH_STMP37XX) := stmp37xx
machine-$(CONFIG_ARCH_TCC8K) := tcc8k
machine-$(CONFIG_ARCH_TEGRA) := tegra
machine-$(CONFIG_ARCH_U300) := u300
machine-$(CONFIG_ARCH_U8500) := ux500
......@@ -202,6 +203,7 @@ plat-$(CONFIG_ARCH_MXC) := mxc
plat-$(CONFIG_ARCH_OMAP) := omap
plat-$(CONFIG_ARCH_S3C64XX) := samsung
plat-$(CONFIG_ARCH_STMP3XXX) := stmp3xxx
plat-$(CONFIG_ARCH_TCC_926) := tcc
plat-$(CONFIG_PLAT_IOP) := iop
plat-$(CONFIG_PLAT_NOMADIK) := nomadik
plat-$(CONFIG_PLAT_ORION) := orion
......@@ -245,13 +247,14 @@ ifeq ($(FASTFPE),$(wildcard $(FASTFPE)))
FASTFPE_OBJ :=$(FASTFPE)/
endif
# If we have a machine-specific directory, then include it in the build.
core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
core-y += $(machdirs) $(platdirs)
core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/
core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ)
core-$(CONFIG_VFP) += arch/arm/vfp/
# If we have a machine-specific directory, then include it in the build.
core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/
core-y += $(machdirs) $(platdirs)
drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/
libs-y := arch/arm/lib/ $(libs-y)
......
arch/arm/common/gic.c
浏览文件 @ b5153163
......@@ -67,25 +67,11 @@ static inline unsigned int gic_irq(unsigned int irq)
/*
* Routines to acknowledge, disable and enable interrupts
*
* Linux assumes that when we're done with an interrupt we need to
* unmask it, in the same way we need to unmask an interrupt when
* we first enable it.
*
* The GIC has a separate notion of "end of interrupt" to re-enable
* an interrupt after handling, in order to support hardware
* prioritisation.
*
* We can make the GIC behave in the way that Linux expects by making
* our "acknowledge" routine disable the interrupt, then mark it as
* complete.
*/
static void gic_ack_irq(unsigned int irq)
{
u32 mask = 1 << (irq % 32);
spin_lock(&irq_controller_lock);
writel(mask, gic_dist_base(irq) + GIC_DIST_ENABLE_CLEAR + (gic_irq(irq) / 32) * 4);
writel(gic_irq(irq), gic_cpu_base(irq) + GIC_CPU_EOI);
spin_unlock(&irq_controller_lock);
}
......
arch/arm/common/pl330.c
浏览文件 @ b5153163
......@@ -146,8 +146,7 @@
#define DESIGNER 0x41
#define REVISION 0x0
#define INTEG_CFG 0x0
#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12) \
| (REVISION << 20) | (INTEG_CFG << 24))
#define PERIPH_ID_VAL ((PART << 0) | (DESIGNER << 12))
#define PCELL_ID_VAL 0xb105f00d
......@@ -1859,10 +1858,10 @@ int pl330_add(struct pl330_info *pi)
regs = pi->base;
/* Check if we can handle this DMAC */
if (get_id(pi, PERIPH_ID) != PERIPH_ID_VAL
if ((get_id(pi, PERIPH_ID) & 0xfffff) != PERIPH_ID_VAL
|| get_id(pi, PCELL_ID) != PCELL_ID_VAL) {
dev_err(pi->dev, "PERIPH_ID 0x%x, PCELL_ID 0x%x !\n",
readl(regs + PERIPH_ID), readl(regs + PCELL_ID));
get_id(pi, PERIPH_ID), get_id(pi, PCELL_ID));
return -EINVAL;
}
......
arch/arm/common/sa1111.c
浏览文件 @ b5153163
......@@ -678,7 +678,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent,
* %-EBUSY physical address already marked in-use.
* %0 successful.
*/
static int
static int __devinit
__sa1111_probe(struct device *me, struct resource *mem, int irq)
{
struct sa1111 *sachip;
......
arch/arm/configs/at91sam9g20ek_defconfig
浏览文件 @ b5153163
......@@ -13,6 +13,7 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91SAM9G20=y
CONFIG_MACH_AT91SAM9G20EK=y
CONFIG_MACH_AT91SAM9G20EK_2MMC=y
CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
# CONFIG_ARM_THUMB is not set
CONFIG_AEABI=y
......
arch/arm/configs/kirkwood_defconfig
浏览文件 @ b5153163
......@@ -15,6 +15,7 @@ CONFIG_MACH_MV88F6281GTW_GE=y
CONFIG_MACH_SHEEVAPLUG=y
CONFIG_MACH_ESATA_SHEEVAPLUG=y
CONFIG_MACH_GURUPLUG=y
CONFIG_MACH_DOCKSTAR=y
CONFIG_MACH_TS219=y
CONFIG_MACH_TS41X=y
CONFIG_MACH_OPENRD_BASE=y
......
arch/arm/configs/mx27_defconfig
浏览文件 @ b5153163
......@@ -21,8 +21,14 @@ CONFIG_ARCH_MX2=y
CONFIG_MACH_MX27=y
CONFIG_MACH_MX27ADS=y
CONFIG_MACH_PCM038=y
CONFIG_MACH_CPUIMX27=y
CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y
CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y
CONFIG_MACH_MX27_3DS=y
CONFIG_MACH_IMX27_VISSTRIM_M10=y
CONFIG_MACH_IMX27LITE=y
CONFIG_MACH_PCA100=y
CONFIG_MACH_MXT_TD60=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
......@@ -76,7 +82,9 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
# CONFIG_SERIO is not set
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
......@@ -85,19 +93,20 @@ CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
CONFIG_SPI=y
CONFIG_SPI_BITBANG=y
CONFIG_SPI_IMX=y
CONFIG_W1=y
CONFIG_W1_MASTER_MXC=y
CONFIG_W1_SLAVE_THERM=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_IMX=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_USB=m
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_MXC=y
CONFIG_RTC_CLASS=y
......
arch/arm/configs/mx31pdk_defconfig 已删除 100644 → 0
浏览文件 @ a8cbf225
# CONFIG_LOCALVERSION_AUTO is not set
# CONFIG_SWAP is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
# CONFIG_COMPAT_BRK is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_MXC=y
# CONFIG_MACH_MX31ADS is not set
CONFIG_MACH_MX31_3DS=y
CONFIG_AEABI=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_LRO is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
# CONFIG_FIRMWARE_IN_KERNEL is not set
# CONFIG_BLK_DEV is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
# CONFIG_SERIO is not set
# CONFIG_DEVKMEM is not set
CONFIG_SERIAL_IMX=y
CONFIG_SERIAL_IMX_CONSOLE=y
# CONFIG_LEGACY_PTYS is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_DNOTIFY is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRC32 is not set
arch/arm/configs/mx3_defconfig
浏览文件 @ b5153163
......@@ -24,6 +24,7 @@ CONFIG_MACH_PCM043=y
CONFIG_MACH_ARMADILLO5X0=y
CONFIG_MACH_MX35_3DS=y
CONFIG_MACH_KZM_ARM11_01=y
CONFIG_MACH_EUKREA_CPUIMX35=y
CONFIG_MXC_IRQ_PRIOR=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
......@@ -108,7 +109,6 @@ CONFIG_MMC=y
CONFIG_MMC_MXC=y
CONFIG_DMADEVICES=y
# CONFIG_DNOTIFY is not set
CONFIG_INOTIFY=y
CONFIG_TMPFS=y
CONFIG_JFFS2_FS=y
CONFIG_UBIFS_FS=y
......
arch/arm/configs/mx51_defconfig
浏览文件 @ b5153163
......@@ -15,6 +15,8 @@ CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_ARCH_MXC=y
CONFIG_ARCH_MX5=y
CONFIG_MACH_MX51_BABBAGE=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_PREEMPT_VOLUNTARY=y
......@@ -69,7 +71,6 @@ CONFIG_REALTEK_PHY=y
CONFIG_NATIONAL_PHY=y
CONFIG_STE10XP=y
CONFIG_LSI_ET1011C_PHY=y
CONFIG_FIXED_PHY=y
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
CONFIG_NET_ETHERNET=y
......@@ -100,7 +101,6 @@ CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_GPIO_SYSFS=y
# CONFIG_HWMON is not set
# CONFIG_VGA_CONSOLE is not set
# CONFIG_HID_SUPPORT is not set
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
......@@ -117,13 +117,11 @@ CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_INOTIFY=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
# CONFIG_PRINT_QUOTA_WARNING is not set
......@@ -136,6 +134,7 @@ CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CONFIGFS_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
......@@ -151,7 +150,6 @@ CONFIG_NLS_UTF8=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
......@@ -159,7 +157,6 @@ CONFIG_DEBUG_KERNEL=y
# CONFIG_ARM_UNWIND is not set
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_KEYS=y
CONFIG_SECURITYFS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_LZO=y
......
arch/arm/configs/realview-smp_defconfig
浏览文件 @ b5153163
......@@ -39,6 +39,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ARM_INTEGRATOR=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
......@@ -52,10 +53,13 @@ CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_VERSATILE=y
CONFIG_SPI=y
CONFIG_GPIOLIB=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
......@@ -70,7 +74,13 @@ CONFIG_SND_ARMAACI=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_INOTIFY=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PL031=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
......@@ -80,6 +90,7 @@ CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
......
arch/arm/configs/realview_defconfig
浏览文件 @ b5153163
......@@ -38,6 +38,7 @@ CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_ARM_INTEGRATOR=y
CONFIG_ARM_CHARLCD=y
CONFIG_NETDEVICES=y
CONFIG_SMSC_PHY=y
CONFIG_NET_ETHERNET=y
......@@ -51,10 +52,13 @@ CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_I2C_VERSATILE=y
CONFIG_SPI=y
CONFIG_GPIOLIB=y
# CONFIG_HWMON is not set
CONFIG_FB=y
CONFIG_FB_ARMCLCD=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
......@@ -69,7 +73,13 @@ CONFIG_SND_ARMAACI=y
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
CONFIG_INOTIFY=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_PL031=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_CRAMFS=y
......@@ -79,6 +89,7 @@ CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
......
arch/arm/configs/s5p6440_defconfig → arch/arm/configs/s5p64x0_defconfig
浏览文件 @ b5153163
......@@ -5,10 +5,11 @@ CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_S5P6440=y
CONFIG_ARCH_S5P64X0=y
CONFIG_S3C_BOOT_ERROR_RESET=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDK6440=y
CONFIG_MACH_SMDK6450=y
CONFIG_CPU_32v6K=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
......
arch/arm/configs/u300_defconfig
浏览文件 @ b5153163
......@@ -28,26 +28,9 @@ CONFIG_CPU_IDLE=y
CONFIG_FPE_NWFPE=y
CONFIG_PM=y
# CONFIG_SUSPEND is not set
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_IPV6 is not set
# CONFIG_WIRELESS is not set
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MISC_DEVICES is not set
# CONFIG_INPUT_MOUSEDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
......@@ -58,7 +41,6 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_HW_RANDOM is not set
CONFIG_I2C=y
CONFIG_POWER_SUPPLY=y
# CONFIG_HWMON is not set
CONFIG_WATCHDOG=y
CONFIG_REGULATOR=y
......@@ -66,24 +48,10 @@ CONFIG_FB=y
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_VGA_CONSOLE is not set
CONFIG_SOUND=y
CONFIG_SND=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_DRIVERS is not set
# CONFIG_SND_ARM is not set
# CONFIG_SND_SPI is not set
CONFIG_SND_SOC=y
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_MMC=y
CONFIG_MMC_DEBUG=y
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_RTC_CLASS=y
# CONFIG_RTC_HCTOSYS is not set
CONFIG_RTC_DRV_COH901331=y
......@@ -93,12 +61,11 @@ CONFIG_COH901318=y
CONFIG_FUSE_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_PREEMPT is not set
......
arch/arm/include/asm/assembler.h
浏览文件 @ b5153163
......@@ -154,16 +154,39 @@
.long 9999b,9001f; \
.popsection
#ifdef CONFIG_SMP
#define ALT_SMP(instr...) \
9998: instr
#define ALT_UP(instr...) \
.pushsection ".alt.smp.init", "a" ;\
.long 9998b ;\
instr ;\
.popsection
#define ALT_UP_B(label) \
.equ up_b_offset, label - 9998b ;\
.pushsection ".alt.smp.init", "a" ;\
.long 9998b ;\
b . + up_b_offset ;\
.popsection
#else
#define ALT_SMP(instr...)
#define ALT_UP(instr...) instr
#define ALT_UP_B(label) b label
#endif
/*
* SMP data memory barrier
*/
.macro smp_dmb
#ifdef CONFIG_SMP
#if __LINUX_ARM_ARCH__ >= 7
dmb
ALT_SMP(dmb)
#elif __LINUX_ARM_ARCH__ == 6
mcr p15, 0, r0, c7, c10, 5 @ dmb
ALT_SMP(mcr p15, 0, r0, c7, c10, 5) @ dmb
#else
#error Incompatible SMP platform
#endif
ALT_UP(nop)
#endif
.endm
......
arch/arm/include/asm/cacheflush.h
浏览文件 @ b5153163
......@@ -137,10 +137,10 @@
#endif
/*
* This flag is used to indicate that the page pointed to by a pte
* is dirty and requires cleaning before returning it to the user.
* This flag is used to indicate that the page pointed to by a pte is clean
* and does not require cleaning before returning it to the user.
*/
#define PG_dcache_dirty PG_arch_1
#define PG_dcache_clean PG_arch_1
/*
* MM Cache Management
......@@ -156,6 +156,12 @@
* Please note that the implementation of these, and the required
* effects are cache-type (VIVT/VIPT/PIPT) specific.
*
* flush_icache_all()
*
* Unconditionally clean and invalidate the entire icache.
* Currently only needed for cache-v6.S and cache-v7.S, see
* __flush_icache_all for the generic implementation.
*
* flush_kern_all()
*
* Unconditionally clean and invalidate the entire cache.
......@@ -206,6 +212,7 @@
*/
struct cpu_cache_fns {
void (*flush_icache_all)(void);
void (*flush_kern_all)(void);
void (*flush_user_all)(void);
void (*flush_user_range)(unsigned long, unsigned long, unsigned int);
......@@ -227,6 +234,7 @@ struct cpu_cache_fns {
extern struct cpu_cache_fns cpu_cache;
#define __cpuc_flush_icache_all cpu_cache.flush_icache_all
#define __cpuc_flush_kern_all cpu_cache.flush_kern_all
#define __cpuc_flush_user_all cpu_cache.flush_user_all
#define __cpuc_flush_user_range cpu_cache.flush_user_range
......@@ -246,6 +254,7 @@ extern struct cpu_cache_fns cpu_cache;
#else
#define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all)
#define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all)
#define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all)
#define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range)
......@@ -253,6 +262,7 @@ extern struct cpu_cache_fns cpu_cache;
#define __cpuc_coherent_user_range __glue(_CACHE,_coherent_user_range)
#define __cpuc_flush_dcache_area __glue(_CACHE,_flush_kern_dcache_area)
extern void __cpuc_flush_icache_all(void);
extern void __cpuc_flush_kern_all(void);
extern void __cpuc_flush_user_all(void);
extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
......@@ -291,6 +301,37 @@ extern void copy_to_user_page(struct vm_area_struct *, struct page *,
/*
* Convert calls to our calling convention.
*/
/* Invalidate I-cache */
#define __flush_icache_all_generic() \
asm("mcr p15, 0, %0, c7, c5, 0" \
: : "r" (0));
/* Invalidate I-cache inner shareable */
#define __flush_icache_all_v7_smp() \
asm("mcr p15, 0, %0, c7, c1, 0" \
: : "r" (0));
/*
* Optimized __flush_icache_all for the common cases. Note that UP ARMv7
* will fall through to use __flush_icache_all_generic.
*/
#if (defined(CONFIG_CPU_V7) && defined(CONFIG_CPU_V6)) || \
defined(CONFIG_SMP_ON_UP)
#define __flush_icache_preferred __cpuc_flush_icache_all
#elif __LINUX_ARM_ARCH__ >= 7 && defined(CONFIG_SMP)
#define __flush_icache_preferred __flush_icache_all_v7_smp
#elif __LINUX_ARM_ARCH__ == 6 && defined(CONFIG_ARM_ERRATA_411920)
#define __flush_icache_preferred __cpuc_flush_icache_all
#else
#define __flush_icache_preferred __flush_icache_all_generic
#endif
static inline void __flush_icache_all(void)
{
__flush_icache_preferred();
}
#define flush_cache_all() __cpuc_flush_kern_all()
static inline void vivt_flush_cache_mm(struct mm_struct *mm)
......@@ -366,21 +407,6 @@ extern void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr
#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
extern void flush_dcache_page(struct page *);
static inline void __flush_icache_all(void)
{
#ifdef CONFIG_ARM_ERRATA_411920
extern void v6_icache_inval_all(void);
v6_icache_inval_all();
#elif defined(CONFIG_SMP) && __LINUX_ARM_ARCH__ >= 7
asm("mcr p15, 0, %0, c7, c1, 0 @ invalidate I-cache inner shareable\n"
:
: "r" (0));
#else
asm("mcr p15, 0, %0, c7, c5, 0 @ invalidate I-cache\n"
:
: "r" (0));
#endif
}
static inline void flush_kernel_vmap_range(void *addr, int size)
{
if ((cache_is_vivt() || cache_is_vipt_aliasing()))
......@@ -405,9 +431,6 @@ static inline void flush_anon_page(struct vm_area_struct *vma,
#define ARCH_HAS_FLUSH_KERNEL_DCACHE_PAGE
static inline void flush_kernel_dcache_page(struct page *page)
{
/* highmem pages are always flushed upon kunmap already */
if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page))
__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
}
#define flush_dcache_mmap_lock(mapping) \
......
arch/arm/include/asm/cachetype.h
浏览文件 @ b5153163
......@@ -6,6 +6,7 @@
#define CACHEID_VIPT_ALIASING (1 << 2)
#define CACHEID_VIPT (CACHEID_VIPT_ALIASING|CACHEID_VIPT_NONALIASING)
#define CACHEID_ASID_TAGGED (1 << 3)
#define CACHEID_VIPT_I_ALIASING (1 << 4)
extern unsigned int cacheid;
......@@ -14,15 +15,18 @@ extern unsigned int cacheid;
#define cache_is_vipt_nonaliasing() cacheid_is(CACHEID_VIPT_NONALIASING)
#define cache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_ALIASING)
#define icache_is_vivt_asid_tagged() cacheid_is(CACHEID_ASID_TAGGED)
#define icache_is_vipt_aliasing() cacheid_is(CACHEID_VIPT_I_ALIASING)
/*
* __LINUX_ARM_ARCH__ is the minimum supported CPU architecture
* Mask out support which will never be present on newer CPUs.
* - v6+ is never VIVT
* - v7+ VIPT never aliases
* - v7+ VIPT never aliases on D-side
*/
#if __LINUX_ARM_ARCH__ >= 7
#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING | CACHEID_ASID_TAGGED)
#define __CACHEID_ARCH_MIN (CACHEID_VIPT_NONALIASING |\
CACHEID_ASID_TAGGED |\
CACHEID_VIPT_I_ALIASING)
#elif __LINUX_ARM_ARCH__ >= 6
#define __CACHEID_ARCH_MIN (~CACHEID_VIVT)
#else
......
arch/arm/include/asm/elf.h
浏览文件 @ b5153163
......@@ -127,4 +127,8 @@ struct mm_struct;
extern unsigned long arch_randomize_brk(struct mm_struct *mm);
#define arch_randomize_brk arch_randomize_brk
extern int vectors_user_mapping(void);
#define arch_setup_additional_pages(bprm, uses_interp) vectors_user_mapping()
#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
#endif
arch/arm/include/asm/ftrace.h
浏览文件 @ b5153163
......@@ -2,12 +2,30 @@
#define _ASM_ARM_FTRACE
#ifdef CONFIG_FUNCTION_TRACER
#define MCOUNT_ADDR ((long)(mcount))
#define MCOUNT_ADDR ((unsigned long)(__gnu_mcount_nc))
#define MCOUNT_INSN_SIZE 4 /* sizeof mcount call */
#ifndef __ASSEMBLY__
extern void mcount(void);
extern void __gnu_mcount_nc(void);
#ifdef CONFIG_DYNAMIC_FTRACE
struct dyn_arch_ftrace {
#ifdef CONFIG_OLD_MCOUNT
bool old_mcount;
#endif
};
static inline unsigned long ftrace_call_adjust(unsigned long addr)
{
/* With Thumb-2, the recorded addresses have the lsb set */
return addr & ~1;
}
extern void ftrace_caller_old(void);
extern void ftrace_call_old(void);
#endif
#endif
#endif
......
arch/arm/include/asm/hardware/coresight.h
浏览文件 @ b5153163
......@@ -21,18 +21,6 @@
#define TRACER_RUNNING BIT(TRACER_RUNNING_BIT)
#define TRACER_CYCLE_ACC BIT(TRACER_CYCLE_ACC_BIT)
struct tracectx {
unsigned int etb_bufsz;
void __iomem *etb_regs;
void __iomem *etm_regs;
unsigned long flags;
int ncmppairs;
int etm_portsz;
struct device *dev;
struct clk *emu_clk;
struct mutex mutex;
};
#define TRACER_TIMEOUT 10000
#define etm_writel(t, v, x) \
......@@ -112,10 +100,10 @@ struct tracectx {
/* ETM status register, "ETM Architecture", 3.3.2 */
#define ETMR_STATUS (0x10)
#define ETMST_OVERFLOW (1 << 0)
#define ETMST_PROGBIT (1 << 1)
#define ETMST_STARTSTOP (1 << 2)
#define ETMST_TRIGGER (1 << 3)
#define ETMST_OVERFLOW BIT(0)
#define ETMST_PROGBIT BIT(1)
#define ETMST_STARTSTOP BIT(2)
#define ETMST_TRIGGER BIT(3)
#define etm_progbit(t) (etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
#define etm_started(t) (etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
......@@ -123,7 +111,7 @@ struct tracectx {
#define ETMR_TRACEENCTRL2 0x1c
#define ETMR_TRACEENCTRL 0x24
#define ETMTE_INCLEXCL (1 << 24)
#define ETMTE_INCLEXCL BIT(24)
#define ETMR_TRACEENEVT 0x20
#define ETMCTRL_OPTS (ETMCTRL_DO_CPRT | \
ETMCTRL_DATA_DO_ADDR | \
......@@ -146,12 +134,12 @@ struct tracectx {
#define ETBR_CTRL 0x20
#define ETBR_FORMATTERCTRL 0x304
#define ETBFF_ENFTC 1
#define ETBFF_ENFCONT (1 << 1)
#define ETBFF_FONFLIN (1 << 4)
#define ETBFF_MANUAL_FLUSH (1 << 6)
#define ETBFF_TRIGIN (1 << 8)
#define ETBFF_TRIGEVT (1 << 9)
#define ETBFF_TRIGFL (1 << 10)
#define ETBFF_ENFCONT BIT(1)
#define ETBFF_FONFLIN BIT(4)
#define ETBFF_MANUAL_FLUSH BIT(6)
#define ETBFF_TRIGIN BIT(8)
#define ETBFF_TRIGEVT BIT(9)
#define ETBFF_TRIGFL BIT(10)
#define etb_writel(t, v, x) \
(__raw_writel((v), (t)->etb_regs + (x)))
......
arch/arm/include/asm/hw_breakpoint.h 0 → 100644
浏览文件 @ b5153163
#ifndef _ARM_HW_BREAKPOINT_H
#define _ARM_HW_BREAKPOINT_H
#ifdef __KERNEL__
struct task_struct;
#ifdef CONFIG_HAVE_HW_BREAKPOINT
struct arch_hw_breakpoint_ctrl {
u32 __reserved : 9,
mismatch : 1,
: 9,
len : 8,
type : 2,
privilege : 2,
enabled : 1;
};
struct arch_hw_breakpoint {
u32 address;
u32 trigger;
struct perf_event *suspended_wp;
struct arch_hw_breakpoint_ctrl ctrl;
};
static inline u32 encode_ctrl_reg(struct arch_hw_breakpoint_ctrl ctrl)
{
return (ctrl.mismatch << 22) | (ctrl.len << 5) | (ctrl.type << 3) |
(ctrl.privilege << 1) | ctrl.enabled;
}
static inline void decode_ctrl_reg(u32 reg,
struct arch_hw_breakpoint_ctrl *ctrl)
{
ctrl->enabled = reg & 0x1;
reg >>= 1;
ctrl->privilege = reg & 0x3;
reg >>= 2;
ctrl->type = reg & 0x3;
reg >>= 2;
ctrl->len = reg & 0xff;
reg >>= 17;
ctrl->mismatch = reg & 0x1;
}
/* Debug architecture numbers. */
#define ARM_DEBUG_ARCH_RESERVED 0 /* In case of ptrace ABI updates. */
#define ARM_DEBUG_ARCH_V6 1
#define ARM_DEBUG_ARCH_V6_1 2
#define ARM_DEBUG_ARCH_V7_ECP14 3
#define ARM_DEBUG_ARCH_V7_MM 4
/* Breakpoint */
#define ARM_BREAKPOINT_EXECUTE 0
/* Watchpoints */
#define ARM_BREAKPOINT_LOAD 1
#define ARM_BREAKPOINT_STORE 2
/* Privilege Levels */
#define ARM_BREAKPOINT_PRIV 1
#define ARM_BREAKPOINT_USER 2
/* Lengths */
#define ARM_BREAKPOINT_LEN_1 0x1
#define ARM_BREAKPOINT_LEN_2 0x3
#define ARM_BREAKPOINT_LEN_4 0xf
#define ARM_BREAKPOINT_LEN_8 0xff
/* Limits */
#define ARM_MAX_BRP 16
#define ARM_MAX_WRP 16
#define ARM_MAX_HBP_SLOTS (ARM_MAX_BRP + ARM_MAX_WRP)
/* DSCR method of entry bits. */
#define ARM_DSCR_MOE(x) ((x >> 2) & 0xf)
#define ARM_ENTRY_BREAKPOINT 0x1
#define ARM_ENTRY_ASYNC_WATCHPOINT 0x2
#define ARM_ENTRY_SYNC_WATCHPOINT 0xa
/* DSCR monitor/halting bits. */
#define ARM_DSCR_HDBGEN (1 << 14)
#define ARM_DSCR_MDBGEN (1 << 15)
/* opcode2 numbers for the co-processor instructions. */
#define ARM_OP2_BVR 4
#define ARM_OP2_BCR 5
#define ARM_OP2_WVR 6
#define ARM_OP2_WCR 7
/* Base register numbers for the debug registers. */
#define ARM_BASE_BVR 64
#define ARM_BASE_BCR 80
#define ARM_BASE_WVR 96
#define ARM_BASE_WCR 112
/* Accessor macros for the debug registers. */
#define ARM_DBG_READ(M, OP2, VAL) do {\
asm volatile("mrc p14, 0, %0, c0," #M ", " #OP2 : "=r" (VAL));\
} while (0)
#define ARM_DBG_WRITE(M, OP2, VAL) do {\
asm volatile("mcr p14, 0, %0, c0," #M ", " #OP2 : : "r" (VAL));\
} while (0)
struct notifier_block;
struct perf_event;
struct pmu;
extern struct pmu perf_ops_bp;
extern int arch_bp_generic_fields(struct arch_hw_breakpoint_ctrl ctrl,
int *gen_len, int *gen_type);
extern int arch_check_bp_in_kernelspace(struct perf_event *bp);
extern int arch_validate_hwbkpt_settings(struct perf_event *bp);
extern int hw_breakpoint_exceptions_notify(struct notifier_block *unused,
unsigned long val, void *data);
extern u8 arch_get_debug_arch(void);
extern u8 arch_get_max_wp_len(void);
extern void clear_ptrace_hw_breakpoint(struct task_struct *tsk);
int arch_install_hw_breakpoint(struct perf_event *bp);
void arch_uninstall_hw_breakpoint(struct perf_event *bp);
void hw_breakpoint_pmu_read(struct perf_event *bp);
int hw_breakpoint_slots(int type);
#else
static inline void clear_ptrace_hw_breakpoint(struct task_struct *tsk) {}
#endif /* CONFIG_HAVE_HW_BREAKPOINT */
#endif /* __KERNEL__ */
#endif /* _ARM_HW_BREAKPOINT_H */
arch/arm/include/asm/io.h
浏览文件 @ b5153163
......@@ -294,6 +294,7 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
extern int valid_phys_addr_range(unsigned long addr, size_t size);
extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
extern int devmem_is_allowed(unsigned long pfn);
#endif
/*
......
arch/arm/include/asm/mach/arch.h
浏览文件 @ b5153163
......@@ -16,18 +16,15 @@ struct sys_timer;
struct machine_desc {
/*
* Note! The first four elements are used
* Note! The first two elements are used
* by assembler code in head.S, head-common.S
*/
unsigned int nr; /* architecture number */
unsigned int nr_irqs; /* number of IRQs */
unsigned int phys_io; /* start of physical io */
unsigned int io_pg_offst; /* byte offset for io
* page tabe entry */
const char *name; /* architecture name */
unsigned long boot_params; /* tagged list */
unsigned int nr_irqs; /* number of IRQs */
unsigned int video_start; /* start of video RAM */
unsigned int video_end; /* end of video RAM */
......
arch/arm/include/asm/mmu_context.h
浏览文件 @ b5153163
......@@ -18,7 +18,6 @@
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
#include <asm/proc-fns.h>
#include <asm-generic/mm_hooks.h>
void __check_kvm_seq(struct mm_struct *mm);
......@@ -134,4 +133,32 @@ switch_mm(struct mm_struct *prev, struct mm_struct *next,
#define deactivate_mm(tsk,mm) do { } while (0)
#define activate_mm(prev,next) switch_mm(prev, next, NULL)
/*
* We are inserting a "fake" vma for the user-accessible vector page so
* gdb and friends can get to it through ptrace and /proc/<pid>/mem.
* But we also want to remove it before the generic code gets to see it
* during process exit or the unmapping of it would cause total havoc.
* (the macro is used as remove_vma() is static to mm/mmap.c)
*/
#define arch_exit_mmap(mm) \
do { \
struct vm_area_struct *high_vma = find_vma(mm, 0xffff0000); \
if (high_vma) { \
BUG_ON(high_vma->vm_next); /* it should be last */ \
if (high_vma->vm_prev) \
high_vma->vm_prev->vm_next = NULL; \
else \
mm->mmap = NULL; \
rb_erase(&high_vma->vm_rb, &mm->mm_rb); \
mm->mmap_cache = NULL; \
mm->map_count--; \
remove_vma(high_vma); \
} \
} while (0)
static inline void arch_dup_mmap(struct mm_struct *oldmm,
struct mm_struct *mm)
{
}
#endif
arch/arm/include/asm/module.h
浏览文件 @ b5153163
......@@ -7,20 +7,27 @@
struct unwind_table;
struct mod_arch_specific
{
#ifdef CONFIG_ARM_UNWIND
Elf_Shdr *unw_sec_init;
Elf_Shdr *unw_sec_devinit;
Elf_Shdr *unw_sec_core;
Elf_Shdr *sec_init_text;
Elf_Shdr *sec_devinit_text;
Elf_Shdr *sec_core_text;
struct unwind_table *unwind_init;
struct unwind_table *unwind_devinit;
struct unwind_table *unwind_core;
#endif
struct arm_unwind_mapping {
Elf_Shdr *unw_sec;
Elf_Shdr *sec_text;
struct unwind_table *unwind;
};
enum {
ARM_SEC_INIT,
ARM_SEC_DEVINIT,
ARM_SEC_CORE,
ARM_SEC_EXIT,
ARM_SEC_DEVEXIT,
ARM_SEC_MAX,
};
struct mod_arch_specific {
struct arm_unwind_mapping map[ARM_SEC_MAX];
};
#else
struct mod_arch_specific {
};
#endif
/*
* Include the ARM architecture version.
......
arch/arm/include/asm/pgtable.h
浏览文件 @ b5153163
......@@ -278,9 +278,24 @@ extern struct page *empty_zero_page;
#define set_pte_ext(ptep,pte,ext) cpu_set_pte_ext(ptep,pte,ext)
#define set_pte_at(mm,addr,ptep,pteval) do { \
set_pte_ext(ptep, pteval, (addr) >= TASK_SIZE ? 0 : PTE_EXT_NG); \
} while (0)
#if __LINUX_ARM_ARCH__ < 6
static inline void __sync_icache_dcache(pte_t pteval)
{
}
#else
extern void __sync_icache_dcache(pte_t pteval);
#endif
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pteval)
{
if (addr >= TASK_SIZE)
set_pte_ext(ptep, pteval, 0);
else {
__sync_icache_dcache(pteval);
set_pte_ext(ptep, pteval, PTE_EXT_NG);
}
}
/*
* The following only work if pte_present() is true.
......@@ -290,8 +305,13 @@ extern struct page *empty_zero_page;
#define pte_write(pte) (pte_val(pte) & L_PTE_WRITE)
#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY)
#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG)
#define pte_exec(pte) (pte_val(pte) & L_PTE_EXEC)
#define pte_special(pte) (0)
#define pte_present_user(pte) \
((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \
(L_PTE_PRESENT | L_PTE_USER))
#define PTE_BIT_FUNC(fn,op) \
static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
......
arch/arm/include/asm/processor.h
浏览文件 @ b5153163
......@@ -19,6 +19,7 @@
#ifdef __KERNEL__
#include <asm/hw_breakpoint.h>
#include <asm/ptrace.h>
#include <asm/types.h>
......@@ -41,6 +42,9 @@ struct debug_entry {
struct debug_info {
int nsaved;
struct debug_entry bp[2];
#ifdef CONFIG_HAVE_HW_BREAKPOINT
struct perf_event *hbp[ARM_MAX_HBP_SLOTS];
#endif
};
struct thread_struct {
......
arch/arm/include/asm/ptrace.h
浏览文件 @ b5153163
......@@ -29,6 +29,8 @@
#define PTRACE_SETCRUNCHREGS 26
#define PTRACE_GETVFPREGS 27
#define PTRACE_SETVFPREGS 28
#define PTRACE_GETHBPREGS 29
#define PTRACE_SETHBPREGS 30
/*
* PSR bits
......
arch/arm/include/asm/seccomp.h 0 → 100644
浏览文件 @ b5153163
#ifndef _ASM_ARM_SECCOMP_H
#define _ASM_ARM_SECCOMP_H
#include <linux/unistd.h>
#define __NR_seccomp_read __NR_read
#define __NR_seccomp_write __NR_write
#define __NR_seccomp_exit __NR_exit
#define __NR_seccomp_sigreturn __NR_rt_sigreturn
#endif /* _ASM_ARM_SECCOMP_H */
arch/arm/include/asm/smp_mpidr.h 0 → 100644
浏览文件 @ b5153163
#ifndef ASMARM_SMP_MIDR_H
#define ASMARM_SMP_MIDR_H
#define hard_smp_processor_id() \
({ \
unsigned int cpunum; \
__asm__("\n" \
"1: mrc p15, 0, %0, c0, c0, 5\n" \
" .pushsection \".alt.smp.init\", \"a\"\n"\
" .long 1b\n" \
" mov %0, #0\n" \
" .popsection" \
: "=r" (cpunum)); \
cpunum &= 0x0F; \
})
#endif
arch/arm/include/asm/smp_plat.h
浏览文件 @ b5153163
......@@ -7,15 +7,40 @@
#include <asm/cputype.h>
/*
* Return true if we are running on a SMP platform
*/
static inline bool is_smp(void)
{
#ifndef CONFIG_SMP
return false;
#elif defined(CONFIG_SMP_ON_UP)
extern unsigned int smp_on_up;
return !!smp_on_up;
#else
return true;
#endif
}
/* all SMP configurations have the extended CPUID registers */
static inline int tlb_ops_need_broadcast(void)
{
if (!is_smp())
return 0;
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 2;
}
#if !defined(CONFIG_SMP) || __LINUX_ARM_ARCH__ >= 7
#define cache_ops_need_broadcast() 0
#else
static inline int cache_ops_need_broadcast(void)
{
if (!is_smp())
return 0;
return ((read_cpuid_ext(CPUID_EXT_MMFR3) >> 12) & 0xf) < 1;
}
#endif
#endif
arch/arm/include/asm/system.h
浏览文件 @ b5153163
......@@ -85,6 +85,10 @@ void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int,
struct pt_regs *),
int sig, int code, const char *name);
void hook_ifault_code(int nr, int (*fn)(unsigned long, unsigned int,
struct pt_regs *),
int sig, int code, const char *name);
#define xchg(ptr,x) \
((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr))))
......@@ -325,6 +329,8 @@ static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size
extern void disable_hlt(void);
extern void enable_hlt(void);
void cpu_idle_wait(void);
#include <asm-generic/cmpxchg-local.h>
#if __LINUX_ARM_ARCH__ < 6
......
arch/arm/include/asm/thread_info.h
浏览文件 @ b5153163
......@@ -144,6 +144,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
#define TIF_FREEZE 19
#define TIF_RESTORE_SIGMASK 20
#define TIF_SECCOMP 21
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
......@@ -153,6 +154,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_FREEZE (1 << TIF_FREEZE)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
/*
* Change these and you break ASM code in entry-common.S
......
arch/arm/include/asm/tlbflush.h
浏览文件 @ b5153163
......@@ -70,6 +70,10 @@
#undef _TLB
#undef MULTI_TLB
#ifdef CONFIG_SMP_ON_UP
#define MULTI_TLB 1
#endif
#define v3_tlb_flags (TLB_V3_FULL | TLB_V3_PAGE)
#ifdef CONFIG_CPU_TLB_V3
......@@ -185,17 +189,23 @@
# define v6wbi_always_flags (-1UL)
#endif
#ifdef CONFIG_SMP
#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \
TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID)
#else
#define v7wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \
#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BTB | \
TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID)
#endif
#ifdef CONFIG_CPU_TLB_V7
# define v7wbi_possible_flags v7wbi_tlb_flags
# define v7wbi_always_flags v7wbi_tlb_flags
# ifdef CONFIG_SMP_ON_UP
# define v7wbi_possible_flags (v7wbi_tlb_flags_smp | v7wbi_tlb_flags_up)
# define v7wbi_always_flags (v7wbi_tlb_flags_smp & v7wbi_tlb_flags_up)
# elif defined(CONFIG_SMP)
# define v7wbi_possible_flags v7wbi_tlb_flags_smp
# define v7wbi_always_flags v7wbi_tlb_flags_smp
# else
# define v7wbi_possible_flags v7wbi_tlb_flags_up
# define v7wbi_always_flags v7wbi_tlb_flags_up
# endif
# ifdef _TLB
# define MULTI_TLB 1
# else
......@@ -560,12 +570,20 @@ extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
#endif
/*
* if PG_dcache_dirty is set for the page, we need to ensure that any
* If PG_dcache_clean is not set for the page, we need to ensure that any
* cache entries for the kernels virtual memory range are written
* back to the page.
* back to the page. On ARMv6 and later, the cache coherency is handled via
* the set_pte_at() function.
*/
#if __LINUX_ARM_ARCH__ < 6
extern void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr,
pte_t *ptep);
#else
static inline void update_mmu_cache(struct vm_area_struct *vma,
unsigned long addr, pte_t *ptep)
{
}
#endif
#endif
......
arch/arm/kernel/Makefile
浏览文件 @ b5153163
......@@ -42,6 +42,7 @@ obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_ARM_UNWIND) += unwind.o
obj-$(CONFIG_HAVE_TCM) += tcm.o
obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
......
arch/arm/kernel/armksyms.c
浏览文件 @ b5153163
......@@ -165,6 +165,8 @@ EXPORT_SYMBOL(_find_next_bit_be);
#endif
#ifdef CONFIG_FUNCTION_TRACER
#ifdef CONFIG_OLD_MCOUNT
EXPORT_SYMBOL(mcount);
#endif
EXPORT_SYMBOL(__gnu_mcount_nc);
#endif
arch/arm/kernel/asm-offsets.c
浏览文件 @ b5153163
......@@ -102,8 +102,6 @@ int main(void)
DEFINE(SIZEOF_MACHINE_DESC, sizeof(struct machine_desc));
DEFINE(MACHINFO_TYPE, offsetof(struct machine_desc, nr));
DEFINE(MACHINFO_NAME, offsetof(struct machine_desc, name));
DEFINE(MACHINFO_PHYSIO, offsetof(struct machine_desc, phys_io));
DEFINE(MACHINFO_PGOFFIO, offsetof(struct machine_desc, io_pg_offst));
BLANK();
DEFINE(PROC_INFO_SZ, sizeof(struct proc_info_list));
DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush));
......
arch/arm/kernel/debug.S
浏览文件 @ b5153163
......@@ -22,11 +22,11 @@
#if defined(CONFIG_DEBUG_ICEDCC)
@@ debug using ARM EmbeddedICE DCC channel
#if defined(CONFIG_CPU_V6)
.macro addruart, rx, tmp
.macro addruart, rp, rv
.endm
#if defined(CONFIG_CPU_V6)
.macro senduart, rd, rx
mcr p14, 0, \rd, c0, c5, 0
.endm
......@@ -51,9 +51,6 @@
#elif defined(CONFIG_CPU_V7)
.macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
mcr p14, 0, \rd, c0, c5, 0
.endm
......@@ -71,9 +68,6 @@ wait: mrc p14, 0, pc, c0, c1, 0
#elif defined(CONFIG_CPU_XSCALE)
.macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
mcr p14, 0, \rd, c8, c0, 0
.endm
......@@ -98,9 +92,6 @@ wait: mrc p14, 0, pc, c0, c1, 0
#else
.macro addruart, rx, tmp
.endm
.macro senduart, rd, rx
mcr p14, 0, \rd, c1, c0, 0
.endm
......@@ -130,6 +121,22 @@ wait: mrc p14, 0, pc, c0, c1, 0
#include <mach/debug-macro.S>
#endif /* CONFIG_DEBUG_ICEDCC */
#ifdef CONFIG_MMU
.macro addruart_current, rx, tmp1, tmp2
addruart \tmp1, \tmp2
mrc p15, 0, \rx, c1, c0
tst \rx, #1
moveq \rx, \tmp1
movne \rx, \tmp2
.endm
#else /* !CONFIG_MMU */
.macro addruart_current, rx, tmp1, tmp2
addruart \rx, \tmp1
.endm
#endif /* CONFIG_MMU */
/*
* Useful debugging routines
*/
......@@ -164,7 +171,7 @@ ENDPROC(printhex2)
.ltorg
ENTRY(printascii)
addruart r3, r1
addruart_current r3, r1, r2
b 2f
1: waituart r2, r3
senduart r1, r3
......@@ -180,7 +187,7 @@ ENTRY(printascii)
ENDPROC(printascii)
ENTRY(printch)
addruart r3, r1
addruart_current r3, r1, r2
mov r1, r0
mov r0, #0
b 1b
......
arch/arm/kernel/entry-armv.S
浏览文件 @ b5153163
......@@ -46,7 +46,8 @@
* this macro assumes that irqstat (r6) and base (r5) are
* preserved from get_irqnr_and_base above
*/
test_for_ipi r0, r6, r5, lr
ALT_SMP(test_for_ipi r0, r6, r5, lr)
ALT_UP_B(9997f)
movne r0, sp
adrne lr, BSYM(1b)
bne do_IPI
......@@ -57,6 +58,7 @@
adrne lr, BSYM(1b)
bne do_local_timer
#endif
9997:
#endif
.endm
......@@ -965,11 +967,8 @@ kuser_cmpxchg_fixup:
beq 1b
rsbs r0, r3, #0
/* beware -- each __kuser slot must be 8 instructions max */
#ifdef CONFIG_SMP
b __kuser_memory_barrier
#else
usr_ret lr
#endif
ALT_SMP(b __kuser_memory_barrier)
ALT_UP(usr_ret lr)
#endif
......
arch/arm/kernel/entry-common.S
浏览文件 @ b5153163
......@@ -129,30 +129,58 @@ ENDPROC(ret_from_fork)
* clobber the ip register. This is OK because the ARM calling convention
* allows it to be clobbered in subroutines and doesn't use it to hold
* parameters.)
*
* When using dynamic ftrace, we patch out the mcount call by a "mov r0, r0"
* for the mcount case, and a "pop {lr}" for the __gnu_mcount_nc case (see
* arch/arm/kernel/ftrace.c).
*/
#ifndef CONFIG_OLD_MCOUNT
#if (__GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 4))
#error Ftrace requires CONFIG_FRAME_POINTER=y with GCC older than 4.4.0.
#endif
#endif
#ifdef CONFIG_DYNAMIC_FTRACE
ENTRY(mcount)
ENTRY(__gnu_mcount_nc)
mov ip, lr
ldmia sp!, {lr}
mov pc, ip
ENDPROC(__gnu_mcount_nc)
ENTRY(ftrace_caller)
stmdb sp!, {r0-r3, lr}
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
ldr r1, [sp, #20]
.globl mcount_call
mcount_call:
.global ftrace_call
ftrace_call:
bl ftrace_stub
ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
ldmia sp!, {r0-r3, ip, lr}
mov pc, ip
ENDPROC(ftrace_caller)
ENTRY(ftrace_caller)
#ifdef CONFIG_OLD_MCOUNT
ENTRY(mcount)
stmdb sp!, {lr}
ldr lr, [fp, #-4]
ldmia sp!, {pc}
ENDPROC(mcount)
ENTRY(ftrace_caller_old)
stmdb sp!, {r0-r3, lr}
ldr r1, [fp, #-4]
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
.globl ftrace_call
ftrace_call:
.globl ftrace_call_old
ftrace_call_old:
bl ftrace_stub
ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
ENDPROC(ftrace_caller_old)
#endif
#else
......@@ -160,7 +188,7 @@ ENTRY(__gnu_mcount_nc)
stmdb sp!, {r0-r3, lr}
ldr r0, =ftrace_trace_function
ldr r2, [r0]
adr r0, ftrace_stub
adr r0, .Lftrace_stub
cmp r0, r2
bne gnu_trace
ldmia sp!, {r0-r3, ip, lr}
......@@ -170,11 +198,19 @@ gnu_trace:
ldr r1, [sp, #20] @ lr of instrumented routine
mov r0, lr
sub r0, r0, #MCOUNT_INSN_SIZE
mov lr, pc
adr lr, BSYM(1f)
mov pc, r2
1:
ldmia sp!, {r0-r3, ip, lr}
mov pc, ip
ENDPROC(__gnu_mcount_nc)
#ifdef CONFIG_OLD_MCOUNT
/*
* This is under an ifdef in order to force link-time errors for people trying
* to build with !FRAME_POINTER with a GCC which doesn't use the new-style
* mcount.
*/
ENTRY(mcount)
stmdb sp!, {r0-r3, lr}
ldr r0, =ftrace_trace_function
......@@ -193,12 +229,15 @@ trace:
mov pc, r2
ldr lr, [fp, #-4] @ restore lr
ldmia sp!, {r0-r3, pc}
ENDPROC(mcount)
#endif
#endif /* CONFIG_DYNAMIC_FTRACE */
.globl ftrace_stub
ftrace_stub:
ENTRY(ftrace_stub)
.Lftrace_stub:
mov pc, lr
ENDPROC(ftrace_stub)
#endif /* CONFIG_FUNCTION_TRACER */
......@@ -295,7 +334,6 @@ ENTRY(vector_swi)
get_thread_info tsk
adr tbl, sys_call_table @ load syscall table pointer
ldr ip, [tsk, #TI_FLAGS] @ check for syscall tracing
#if defined(CONFIG_OABI_COMPAT)
/*
......@@ -312,8 +350,20 @@ ENTRY(vector_swi)
eor scno, scno, #__NR_SYSCALL_BASE @ check OS number
#endif
ldr r10, [tsk, #TI_FLAGS] @ check for syscall tracing
stmdb sp!, {r4, r5} @ push fifth and sixth args
tst ip, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
#ifdef CONFIG_SECCOMP
tst r10, #_TIF_SECCOMP
beq 1f
mov r0, scno
bl __secure_computing
add r0, sp, #S_R0 + S_OFF @ pointer to regs
ldmia r0, {r0 - r3} @ have to reload r0 - r3
1:
#endif
tst r10, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
bne __sys_trace
cmp scno, #NR_syscalls @ check upper syscall limit
......
arch/arm/kernel/etm.c
浏览文件 @ b5153163
......@@ -30,6 +30,21 @@
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Alexander Shishkin");
/*
* ETM tracer state
*/
struct tracectx {
unsigned int etb_bufsz;
void __iomem *etb_regs;
void __iomem *etm_regs;
unsigned long flags;
int ncmppairs;
int etm_portsz;
struct device *dev;
struct clk *emu_clk;
struct mutex mutex;
};
static struct tracectx tracer;
static inline bool trace_isrunning(struct tracectx *t)
......
arch/arm/kernel/ftrace.c
浏览文件 @ b5153163
......@@ -2,102 +2,194 @@
* Dynamic function tracing support.
*
* Copyright (C) 2008 Abhishek Sagar <sagar.abhishek@gmail.com>
* Copyright (C) 2010 Rabin Vincent <rabin@rab.in>
*
* For licencing details, see COPYING.
*
* Defines low-level handling of mcount calls when the kernel
* is compiled with the -pg flag. When using dynamic ftrace, the
* mcount call-sites get patched lazily with NOP till they are
* enabled. All code mutation routines here take effect atomically.
* mcount call-sites get patched with NOP till they are enabled.
* All code mutation routines here are called under stop_machine().
*/
#include <linux/ftrace.h>
#include <linux/uaccess.h>
#include <asm/cacheflush.h>
#include <asm/ftrace.h>
#define PC_OFFSET 8
#define BL_OPCODE 0xeb000000
#define BL_OFFSET_MASK 0x00ffffff
#ifdef CONFIG_THUMB2_KERNEL
#define NOP 0xeb04f85d /* pop.w {lr} */
#else
#define NOP 0xe8bd4000 /* pop {lr} */
#endif
static unsigned long bl_insn;
static const unsigned long NOP = 0xe1a00000; /* mov r0, r0 */
#ifdef CONFIG_OLD_MCOUNT
#define OLD_MCOUNT_ADDR ((unsigned long) mcount)
#define OLD_FTRACE_ADDR ((unsigned long) ftrace_caller_old)
unsigned char *ftrace_nop_replace(void)
#define OLD_NOP 0xe1a00000 /* mov r0, r0 */
static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
{
return (char *)&NOP;
return rec->arch.old_mcount ? OLD_NOP : NOP;
}
static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
{
if (!rec->arch.old_mcount)
return addr;
if (addr == MCOUNT_ADDR)
addr = OLD_MCOUNT_ADDR;
else if (addr == FTRACE_ADDR)
addr = OLD_FTRACE_ADDR;
return addr;
}
#else
static unsigned long ftrace_nop_replace(struct dyn_ftrace *rec)
{
return NOP;
}
static unsigned long adjust_address(struct dyn_ftrace *rec, unsigned long addr)
{
return addr;
}
#endif
/* construct a branch (BL) instruction to addr */
unsigned char *ftrace_call_replace(unsigned long pc, unsigned long addr)
#ifdef CONFIG_THUMB2_KERNEL
static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
{
unsigned long s, j1, j2, i1, i2, imm10, imm11;
unsigned long first, second;
long offset;
offset = (long)addr - (long)(pc + PC_OFFSET);
offset = (long)addr - (long)(pc + 4);
if (offset < -16777216 || offset > 16777214) {
WARN_ON_ONCE(1);
return 0;
}
s = (offset >> 24) & 0x1;
i1 = (offset >> 23) & 0x1;
i2 = (offset >> 22) & 0x1;
imm10 = (offset >> 12) & 0x3ff;
imm11 = (offset >> 1) & 0x7ff;
j1 = (!i1) ^ s;
j2 = (!i2) ^ s;
first = 0xf000 | (s << 10) | imm10;
second = 0xd000 | (j1 << 13) | (j2 << 11) | imm11;
return (second << 16) | first;
}
#else
static unsigned long ftrace_call_replace(unsigned long pc, unsigned long addr)
{
long offset;
offset = (long)addr - (long)(pc + 8);
if (unlikely(offset < -33554432 || offset > 33554428)) {
/* Can't generate branches that far (from ARM ARM). Ftrace
* doesn't generate branches outside of kernel text.
*/
WARN_ON_ONCE(1);
return NULL;
return 0;
}
offset = (offset >> 2) & BL_OFFSET_MASK;
bl_insn = BL_OPCODE | offset;
return (unsigned char *)&bl_insn;
}
int ftrace_modify_code(unsigned long pc, unsigned char *old_code,
unsigned char *new_code)
{
unsigned long err = 0, replaced = 0, old, new;
offset = (offset >> 2) & 0x00ffffff;
old = *(unsigned long *)old_code;
new = *(unsigned long *)new_code;
return 0xeb000000 | offset;
}
#endif
__asm__ __volatile__ (
"1: ldr %1, [%2] \n"
" cmp %1, %4 \n"
"2: streq %3, [%2] \n"
" cmpne %1, %3 \n"
" movne %0, #2 \n"
"3:\n"
static int ftrace_modify_code(unsigned long pc, unsigned long old,
unsigned long new)
{
unsigned long replaced;
".pushsection .fixup, \"ax\"\n"
"4: mov %0, #1 \n"
" b 3b \n"
".popsection\n"
if (probe_kernel_read(&replaced, (void *)pc, MCOUNT_INSN_SIZE))
return -EFAULT;
".pushsection __ex_table, \"a\"\n"
" .long 1b, 4b \n"
" .long 2b, 4b \n"
".popsection\n"
if (replaced != old)
return -EINVAL;
: "=r"(err), "=r"(replaced)
: "r"(pc), "r"(new), "r"(old), "0"(err), "1"(replaced)
: "memory");
if (probe_kernel_write((void *)pc, &new, MCOUNT_INSN_SIZE))
return -EPERM;
if (!err && (replaced == old))
flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
flush_icache_range(pc, pc + MCOUNT_INSN_SIZE);
return err;
return 0;
}
int ftrace_update_ftrace_func(ftrace_func_t func)
{
int ret;
unsigned long pc, old;
unsigned char *new;
unsigned long new;
int ret;
pc = (unsigned long)&ftrace_call;
memcpy(&old, &ftrace_call, MCOUNT_INSN_SIZE);
new = ftrace_call_replace(pc, (unsigned long)func);
ret = ftrace_modify_code(pc, (unsigned char *)&old, new);
ret = ftrace_modify_code(pc, old, new);
#ifdef CONFIG_OLD_MCOUNT
if (!ret) {
pc = (unsigned long)&ftrace_call_old;
memcpy(&old, &ftrace_call_old, MCOUNT_INSN_SIZE);
new = ftrace_call_replace(pc, (unsigned long)func);
ret = ftrace_modify_code(pc, old, new);
}
#endif
return ret;
}
int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long new, old;
unsigned long ip = rec->ip;
old = ftrace_nop_replace(rec);
new = ftrace_call_replace(ip, adjust_address(rec, addr));
return ftrace_modify_code(rec->ip, old, new);
}
int ftrace_make_nop(struct module *mod,
struct dyn_ftrace *rec, unsigned long addr)
{
unsigned long ip = rec->ip;
unsigned long old;
unsigned long new;
int ret;
old = ftrace_call_replace(ip, adjust_address(rec, addr));
new = ftrace_nop_replace(rec);
ret = ftrace_modify_code(ip, old, new);
#ifdef CONFIG_OLD_MCOUNT
if (ret == -EINVAL && addr == MCOUNT_ADDR) {
rec->arch.old_mcount = true;
old = ftrace_call_replace(ip, adjust_address(rec, addr));
new = ftrace_nop_replace(rec);
ret = ftrace_modify_code(ip, old, new);
}
#endif
return ret;
}
/* run from ftrace_init with irqs disabled */
int __init ftrace_dyn_arch_init(void *data)
{
ftrace_mcount_set(data);
*(unsigned long *)data = 0;
return 0;
}
arch/arm/kernel/head-common.S
浏览文件 @ b5153163
......@@ -15,55 +15,6 @@
#define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2)
#define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2)
.align 2
.type __switch_data, %object
__switch_data:
.long __mmap_switched
.long __data_loc @ r4
.long _data @ r5
.long __bss_start @ r6
.long _end @ r7
.long processor_id @ r4
.long __machine_arch_type @ r5
.long __atags_pointer @ r6
.long cr_alignment @ r7
.long init_thread_union + THREAD_START_SP @ sp
/*
* The following fragment of code is executed with the MMU on in MMU mode,
* and uses absolute addresses; this is not position independent.
*
* r0 = cp#15 control register
* r1 = machine ID
* r2 = atags pointer
* r9 = processor ID
*/
__mmap_switched:
adr r3, __switch_data + 4
ldmia r3!, {r4, r5, r6, r7}
cmp r4, r5 @ Copy data segment if needed
1: cmpne r5, r6
ldrne fp, [r4], #4
strne fp, [r5], #4
bne 1b
mov fp, #0 @ Clear BSS (and zero fp)
1: cmp r6, r7
strcc fp, [r6],#4
bcc 1b
ARM( ldmia r3, {r4, r5, r6, r7, sp})
THUMB( ldmia r3, {r4, r5, r6, r7} )
THUMB( ldr sp, [r3, #16] )
str r9, [r4] @ Save processor ID
str r1, [r5] @ Save machine type
str r2, [r6] @ Save atags pointer
bic r4, r0, #CR_A @ Clear 'A' bit
stmia r7, {r0, r4} @ Save control register values
b start_kernel
ENDPROC(__mmap_switched)
/*
* Exception handling. Something went wrong and we can't proceed. We
* ought to tell the user, but since we don't have any guarantee that
......@@ -73,21 +24,7 @@ ENDPROC(__mmap_switched)
* and hope for the best (useful if bootloader fails to pass a proper
* machine ID for example).
*/
__error_p:
#ifdef CONFIG_DEBUG_LL
adr r0, str_p1
bl printascii
mov r0, r9
bl printhex8
adr r0, str_p2
bl printascii
b __error
str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x"
str_p2: .asciz ").\n"
.align
#endif
ENDPROC(__error_p)
__HEAD
__error_a:
#ifdef CONFIG_DEBUG_LL
mov r4, r1 @ preserve machine ID
......@@ -97,7 +34,7 @@ __error_a:
bl printhex8
adr r0, str_a2
bl printascii
adr r3, 4f
adr r3, __lookup_machine_type_data
ldmia r3, {r4, r5, r6} @ get machine desc list
sub r4, r3, r4 @ get offset between virt&phys
add r5, r5, r4 @ convert virt addresses to
......@@ -125,78 +62,6 @@ str_a3: .asciz "\nPlease check your kernel config and/or bootloader.\n"
.align
#endif
__error:
#ifdef CONFIG_ARCH_RPC
/*
* Turn the screen red on a error - RiscPC only.
*/
mov r0, #0x02000000
mov r3, #0x11
orr r3, r3, r3, lsl #8
orr r3, r3, r3, lsl #16
str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
#endif
1: mov r0, r0
b 1b
ENDPROC(__error)
/*
* Read processor ID register (CP#15, CR0), and look up in the linker-built
* supported processor list. Note that we can't use the absolute addresses
* for the __proc_info lists since we aren't running with the MMU on
* (and therefore, we are not in the correct address space). We have to
* calculate the offset.
*
* r9 = cpuid
* Returns:
* r3, r4, r6 corrupted
* r5 = proc_info pointer in physical address space
* r9 = cpuid (preserved)
*/
__lookup_processor_type:
adr r3, 3f
ldmia r3, {r5 - r7}
add r3, r3, #8
sub r3, r3, r7 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
add r6, r6, r3 @ physical address space
1: ldmia r5, {r3, r4} @ value, mask
and r4, r4, r9 @ mask wanted bits
teq r3, r4
beq 2f
add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
cmp r5, r6
blo 1b
mov r5, #0 @ unknown processor
2: mov pc, lr
ENDPROC(__lookup_processor_type)
/*
* This provides a C-API version of the above function.
*/
ENTRY(lookup_processor_type)
stmfd sp!, {r4 - r7, r9, lr}
mov r9, r0
bl __lookup_processor_type
mov r0, r5
ldmfd sp!, {r4 - r7, r9, pc}
ENDPROC(lookup_processor_type)
/*
* Look in <asm/procinfo.h> and arch/arm/kernel/arch.[ch] for
* more information about the __proc_info and __arch_info structures.
*/
.align 2
3: .long __proc_info_begin
.long __proc_info_end
4: .long .
.long __arch_info_begin
.long __arch_info_end
/*
* Lookup machine architecture in the linker-build list of architectures.
* Note that we can't use the absolute addresses for the __arch_info
......@@ -209,7 +74,7 @@ ENDPROC(lookup_processor_type)
* r5 = mach_info pointer in physical address space
*/
__lookup_machine_type:
adr r3, 4b
adr r3, __lookup_machine_type_data
ldmia r3, {r4, r5, r6}
sub r3, r3, r4 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
......@@ -225,15 +90,16 @@ __lookup_machine_type:
ENDPROC(__lookup_machine_type)
/*
* This provides a C-API version of the above function.
* Look in arch/arm/kernel/arch.[ch] for information about the
* __arch_info structures.
*/
ENTRY(lookup_machine_type)
stmfd sp!, {r4 - r6, lr}
mov r1, r0
bl __lookup_machine_type
mov r0, r5
ldmfd sp!, {r4 - r6, pc}
ENDPROC(lookup_machine_type)
.align 2
.type __lookup_machine_type_data, %object
__lookup_machine_type_data:
.long .
.long __arch_info_begin
.long __arch_info_end
.size __lookup_machine_type_data, . - __lookup_machine_type_data
/* Determine validity of the r2 atags pointer. The heuristic requires
* that the pointer be aligned, in the first 16k of physical RAM and
......@@ -265,3 +131,150 @@ __vet_atags:
1: mov r2, #0
mov pc, lr
ENDPROC(__vet_atags)
/*
* The following fragment of code is executed with the MMU on in MMU mode,
* and uses absolute addresses; this is not position independent.
*
* r0 = cp#15 control register
* r1 = machine ID
* r2 = atags pointer
* r9 = processor ID
*/
__INIT
__mmap_switched:
adr r3, __mmap_switched_data
ldmia r3!, {r4, r5, r6, r7}
cmp r4, r5 @ Copy data segment if needed
1: cmpne r5, r6
ldrne fp, [r4], #4
strne fp, [r5], #4
bne 1b
mov fp, #0 @ Clear BSS (and zero fp)
1: cmp r6, r7
strcc fp, [r6],#4
bcc 1b
ARM( ldmia r3, {r4, r5, r6, r7, sp})
THUMB( ldmia r3, {r4, r5, r6, r7} )
THUMB( ldr sp, [r3, #16] )
str r9, [r4] @ Save processor ID
str r1, [r5] @ Save machine type
str r2, [r6] @ Save atags pointer
bic r4, r0, #CR_A @ Clear 'A' bit
stmia r7, {r0, r4} @ Save control register values
b start_kernel
ENDPROC(__mmap_switched)
.align 2
.type __mmap_switched_data, %object
__mmap_switched_data:
.long __data_loc @ r4
.long _sdata @ r5
.long __bss_start @ r6
.long _end @ r7
.long processor_id @ r4
.long __machine_arch_type @ r5
.long __atags_pointer @ r6
.long cr_alignment @ r7
.long init_thread_union + THREAD_START_SP @ sp
.size __mmap_switched_data, . - __mmap_switched_data
/*
* This provides a C-API version of __lookup_machine_type
*/
ENTRY(lookup_machine_type)
stmfd sp!, {r4 - r6, lr}
mov r1, r0
bl __lookup_machine_type
mov r0, r5
ldmfd sp!, {r4 - r6, pc}
ENDPROC(lookup_machine_type)
/*
* This provides a C-API version of __lookup_processor_type
*/
ENTRY(lookup_processor_type)
stmfd sp!, {r4 - r6, r9, lr}
mov r9, r0
bl __lookup_processor_type
mov r0, r5
ldmfd sp!, {r4 - r6, r9, pc}
ENDPROC(lookup_processor_type)
/*
* Read processor ID register (CP#15, CR0), and look up in the linker-built
* supported processor list. Note that we can't use the absolute addresses
* for the __proc_info lists since we aren't running with the MMU on
* (and therefore, we are not in the correct address space). We have to
* calculate the offset.
*
* r9 = cpuid
* Returns:
* r3, r4, r6 corrupted
* r5 = proc_info pointer in physical address space
* r9 = cpuid (preserved)
*/
__CPUINIT
__lookup_processor_type:
adr r3, __lookup_processor_type_data
ldmia r3, {r4 - r6}
sub r3, r3, r4 @ get offset between virt&phys
add r5, r5, r3 @ convert virt addresses to
add r6, r6, r3 @ physical address space
1: ldmia r5, {r3, r4} @ value, mask
and r4, r4, r9 @ mask wanted bits
teq r3, r4
beq 2f
add r5, r5, #PROC_INFO_SZ @ sizeof(proc_info_list)
cmp r5, r6
blo 1b
mov r5, #0 @ unknown processor
2: mov pc, lr
ENDPROC(__lookup_processor_type)
/*
* Look in <asm/procinfo.h> for information about the __proc_info structure.
*/
.align 2
.type __lookup_processor_type_data, %object
__lookup_processor_type_data:
.long .
.long __proc_info_begin
.long __proc_info_end
.size __lookup_processor_type_data, . - __lookup_processor_type_data
__error_p:
#ifdef CONFIG_DEBUG_LL
adr r0, str_p1
bl printascii
mov r0, r9
bl printhex8
adr r0, str_p2
bl printascii
b __error
str_p1: .asciz "\nError: unrecognized/unsupported processor variant (0x"
str_p2: .asciz ").\n"
.align
#endif
ENDPROC(__error_p)
__error:
#ifdef CONFIG_ARCH_RPC
/*
* Turn the screen red on a error - RiscPC only.
*/
mov r0, #0x02000000
mov r3, #0x11
orr r3, r3, r3, lsl #8
orr r3, r3, r3, lsl #16
str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
str r3, [r0], #4
#endif
1: mov r0, r0
b 1b
ENDPROC(__error)
arch/arm/kernel/head-nommu.S
浏览文件 @ b5153163
......@@ -48,8 +48,6 @@ ENTRY(stext)
movs r8, r5 @ invalid machine (r5=0)?
beq __error_a @ yes, error 'a'
ldr r13, __switch_data @ address to jump to after
@ the initialization is done
adr lr, BSYM(__after_proc_init) @ return (PIC) address
ARM( add pc, r10, #PROCINFO_INITFUNC )
THUMB( add r12, r10, #PROCINFO_INITFUNC )
......@@ -87,8 +85,7 @@ __after_proc_init:
mcr p15, 0, r0, c1, c0, 0 @ write control reg
#endif /* CONFIG_CPU_CP15 */
mov r3, r13
mov pc, r3 @ clear the BSS and jump
b __mmap_switched @ clear the BSS and jump
@ to start_kernel
ENDPROC(__after_proc_init)
.ltorg
......
arch/arm/kernel/head.S
浏览文件 @ b5153163
......@@ -22,6 +22,10 @@
#include <asm/thread_info.h>
#include <asm/system.h>
#ifdef CONFIG_DEBUG_LL
#include <mach/debug-macro.S>
#endif
#if (PHYS_OFFSET & 0x001fffff)
#error "PHYS_OFFSET must be at an even 2MiB boundary!"
#endif
......@@ -86,6 +90,9 @@ ENTRY(stext)
movs r8, r5 @ invalid machine (r5=0)?
beq __error_a @ yes, error 'a'
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
bl __fixup_smp
#endif
bl __create_page_tables
/*
......@@ -95,113 +102,15 @@ ENTRY(stext)
* above. On return, the CPU will be ready for the MMU to be
* turned on, and r0 will hold the CPU control register value.
*/
ldr r13, __switch_data @ address to jump to after
ldr r13, =__mmap_switched @ address to jump to after
@ mmu has been enabled
adr lr, BSYM(__enable_mmu) @ return (PIC) address
adr lr, BSYM(1f) @ return (PIC) address
ARM( add pc, r10, #PROCINFO_INITFUNC )
THUMB( add r12, r10, #PROCINFO_INITFUNC )
THUMB( mov pc, r12 )
1: b __enable_mmu
ENDPROC(stext)
#if defined(CONFIG_SMP)
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
*
* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
beq __error
/*
* Use the page tables supplied from __cpu_up.
*/
adr r4, __secondary_data
ldmia r4, {r5, r7, r12} @ address to jump to after
sub r4, r4, r5 @ mmu has been enabled
ldr r4, [r7, r4] @ get secondary_data.pgdir
adr lr, BSYM(__enable_mmu) @ return address
mov r13, r12 @ __secondary_switched address
ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
@ (return control reg)
THUMB( add r12, r10, #PROCINFO_INITFUNC )
THUMB( mov pc, r12 )
ENDPROC(secondary_startup)
/*
* r6 = &secondary_data
*/
ENTRY(__secondary_switched)
ldr sp, [r7, #4] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
.type __secondary_data, %object
__secondary_data:
.long .
.long secondary_data
.long __secondary_switched
#endif /* defined(CONFIG_SMP) */
/*
* Setup common bits before finally enabling the MMU. Essentially
* this is just loading the page table pointer and domain access
* registers.
*/
__enable_mmu:
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A
#endif
#ifdef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CR_C
#endif
#ifdef CONFIG_CPU_BPREDICT_DISABLE
bic r0, r0, #CR_Z
#endif
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
domain_val(DOMAIN_IO, DOMAIN_CLIENT))
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
b __turn_mmu_on
ENDPROC(__enable_mmu)
/*
* Enable the MMU. This completely changes the structure of the visible
* memory space. You will not be able to trace execution through this.
* If you have an enquiry about this, *please* check the linux-arm-kernel
* mailing list archives BEFORE sending another post to the list.
*
* r0 = cp#15 control register
* r13 = *virtual* address to jump to upon completion
*
* other registers depend on the function called upon completion
*/
.align 5
__turn_mmu_on:
mov r0, r0
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mrc p15, 0, r3, c0, c0, 0 @ read id reg
mov r3, r3
mov r3, r13
mov pc, r3
ENDPROC(__turn_mmu_on)
.ltorg
/*
* Setup the initial page tables. We only setup the barest
......@@ -213,7 +122,7 @@ ENDPROC(__turn_mmu_on)
* r10 = procinfo
*
* Returns:
* r0, r3, r6, r7 corrupted
* r0, r3, r5-r7 corrupted
* r4 = physical page table address
*/
__create_page_tables:
......@@ -235,20 +144,30 @@ __create_page_tables:
ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
* Create identity mapping for first MB of kernel to
* cater for the MMU enable. This identity mapping
* will be removed by paging_init(). We use our current program
* counter to determine corresponding section base address.
* Create identity mapping to cater for __enable_mmu.
* This identity mapping will be removed by paging_init().
*/
mov r6, pc
mov r6, r6, lsr #20 @ start of kernel section
orr r3, r7, r6, lsl #20 @ flags + kernel base
str r3, [r4, r6, lsl #2] @ identity mapping
adr r0, __enable_mmu_loc
ldmia r0, {r3, r5, r6}
sub r0, r0, r3 @ virt->phys offset
add r5, r5, r0 @ phys __enable_mmu
add r6, r6, r0 @ phys __enable_mmu_end
mov r5, r5, lsr #20
mov r6, r6, lsr #20
1: orr r3, r7, r5, lsl #20 @ flags + kernel base
str r3, [r4, r5, lsl #2] @ identity mapping
teq r5, r6
addne r5, r5, #1 @ next section
bne 1b
/*
* Now setup the pagetables for our kernel direct
* mapped region.
*/
mov r3, pc
mov r3, r3, lsr #20
orr r3, r7, r3, lsl #20
add r0, r4, #(KERNEL_START & 0xff000000) >> 18
str r3, [r0, #(KERNEL_START & 0x00f00000) >> 18]!
ldr r6, =(KERNEL_END - 1)
......@@ -289,24 +208,35 @@ __create_page_tables:
str r6, [r0]
#ifdef CONFIG_DEBUG_LL
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
#ifndef CONFIG_DEBUG_ICEDCC
/*
* Map in IO space for serial debugging.
* This allows debug messages to be output
* via a serial console before paging_init.
*/
ldr r3, [r8, #MACHINFO_PGOFFIO]
addruart r7, r3
mov r3, r3, lsr #20
mov r3, r3, lsl #2
add r0, r4, r3
rsb r3, r3, #0x4000 @ PTRS_PER_PGD*sizeof(long)
cmp r3, #0x0800 @ limit to 512MB
movhi r3, #0x0800
add r6, r0, r3
ldr r3, [r8, #MACHINFO_PHYSIO]
orr r3, r3, r7
mov r3, r7, lsr #20
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
orr r3, r7, r3, lsl #20
1: str r3, [r0], #4
add r3, r3, #1 << 20
teq r0, r6
bne 1b
#else /* CONFIG_DEBUG_ICEDCC */
/* we don't need any serial debugging mappings for ICEDCC */
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
#endif /* !CONFIG_DEBUG_ICEDCC */
#if defined(CONFIG_ARCH_NETWINDER) || defined(CONFIG_ARCH_CATS)
/*
* If we're using the NetWinder or CATS, we also need to map
......@@ -332,5 +262,168 @@ __create_page_tables:
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
__enable_mmu_loc:
.long .
.long __enable_mmu
.long __enable_mmu_end
#if defined(CONFIG_SMP)
__CPUINIT
ENTRY(secondary_startup)
/*
* Common entry point for secondary CPUs.
*
* Ensure that we're in SVC mode, and IRQs are disabled. Lookup
* the processor type - there is no need to check the machine type
* as it has already been validated by the primary processor.
*/
setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
beq __error_p
/*
* Use the page tables supplied from __cpu_up.
*/
adr r4, __secondary_data
ldmia r4, {r5, r7, r12} @ address to jump to after
sub r4, r4, r5 @ mmu has been enabled
ldr r4, [r7, r4] @ get secondary_data.pgdir
adr lr, BSYM(__enable_mmu) @ return address
mov r13, r12 @ __secondary_switched address
ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor
@ (return control reg)
THUMB( add r12, r10, #PROCINFO_INITFUNC )
THUMB( mov pc, r12 )
ENDPROC(secondary_startup)
/*
* r6 = &secondary_data
*/
ENTRY(__secondary_switched)
ldr sp, [r7, #4] @ get secondary_data.stack
mov fp, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
.type __secondary_data, %object
__secondary_data:
.long .
.long secondary_data
.long __secondary_switched
#endif /* defined(CONFIG_SMP) */
/*
* Setup common bits before finally enabling the MMU. Essentially
* this is just loading the page table pointer and domain access
* registers.
*
* r0 = cp#15 control register
* r1 = machine ID
* r2 = atags pointer
* r4 = page table pointer
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
*/
__enable_mmu:
#ifdef CONFIG_ALIGNMENT_TRAP
orr r0, r0, #CR_A
#else
bic r0, r0, #CR_A
#endif
#ifdef CONFIG_CPU_DCACHE_DISABLE
bic r0, r0, #CR_C
#endif
#ifdef CONFIG_CPU_BPREDICT_DISABLE
bic r0, r0, #CR_Z
#endif
#ifdef CONFIG_CPU_ICACHE_DISABLE
bic r0, r0, #CR_I
#endif
mov r5, #(domain_val(DOMAIN_USER, DOMAIN_MANAGER) | \
domain_val(DOMAIN_KERNEL, DOMAIN_MANAGER) | \
domain_val(DOMAIN_TABLE, DOMAIN_MANAGER) | \
domain_val(DOMAIN_IO, DOMAIN_CLIENT))
mcr p15, 0, r5, c3, c0, 0 @ load domain access register
mcr p15, 0, r4, c2, c0, 0 @ load page table pointer
b __turn_mmu_on
ENDPROC(__enable_mmu)
/*
* Enable the MMU. This completely changes the structure of the visible
* memory space. You will not be able to trace execution through this.
* If you have an enquiry about this, *please* check the linux-arm-kernel
* mailing list archives BEFORE sending another post to the list.
*
* r0 = cp#15 control register
* r1 = machine ID
* r2 = atags pointer
* r9 = processor ID
* r13 = *virtual* address to jump to upon completion
*
* other registers depend on the function called upon completion
*/
.align 5
__turn_mmu_on:
mov r0, r0
mcr p15, 0, r0, c1, c0, 0 @ write control reg
mrc p15, 0, r3, c0, c0, 0 @ read id reg
mov r3, r3
mov r3, r13
mov pc, r3
__enable_mmu_end:
ENDPROC(__turn_mmu_on)
#ifdef CONFIG_SMP_ON_UP
__fixup_smp:
mov r7, #0x00070000
orr r6, r7, #0xff000000 @ mask 0xff070000
orr r7, r7, #0x41000000 @ val 0x41070000
and r0, r9, r6
teq r0, r7 @ ARM CPU and ARMv6/v7?
bne __fixup_smp_on_up @ no, assume UP
orr r6, r6, #0x0000ff00
orr r6, r6, #0x000000f0 @ mask 0xff07fff0
orr r7, r7, #0x0000b000
orr r7, r7, #0x00000020 @ val 0x4107b020
and r0, r9, r6
teq r0, r7 @ ARM 11MPCore?
moveq pc, lr @ yes, assume SMP
mrc p15, 0, r0, c0, c0, 5 @ read MPIDR
tst r0, #1 << 31
movne pc, lr @ bit 31 => SMP
__fixup_smp_on_up:
adr r0, 1f
ldmia r0, {r3, r6, r7}
sub r3, r0, r3
add r6, r6, r3
add r7, r7, r3
2: cmp r6, r7
ldmia r6!, {r0, r4}
strlo r4, [r0, r3]
blo 2b
mov pc, lr
ENDPROC(__fixup_smp)
1: .word .
.word __smpalt_begin
.word __smpalt_end
.pushsection .data
.globl smp_on_up
smp_on_up:
ALT_SMP(.long 1)
ALT_UP(.long 0)
.popsection
#endif
#include "head-common.S"
arch/arm/kernel/hw_breakpoint.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/kernel/module.c
浏览文件 @ b5153163
......@@ -69,20 +69,31 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
{
#ifdef CONFIG_ARM_UNWIND
Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
struct arm_unwind_mapping *maps = mod->arch.map;
for (s = sechdrs; s < sechdrs_end; s++) {
if (strcmp(".ARM.exidx.init.text", secstrings + s->sh_name) == 0)
mod->arch.unw_sec_init = s;
else if (strcmp(".ARM.exidx.devinit.text", secstrings + s->sh_name) == 0)
mod->arch.unw_sec_devinit = s;
else if (strcmp(".ARM.exidx", secstrings + s->sh_name) == 0)
mod->arch.unw_sec_core = s;
else if (strcmp(".init.text", secstrings + s->sh_name) == 0)
mod->arch.sec_init_text = s;
else if (strcmp(".devinit.text", secstrings + s->sh_name) == 0)
mod->arch.sec_devinit_text = s;
else if (strcmp(".text", secstrings + s->sh_name) == 0)
mod->arch.sec_core_text = s;
char const *secname = secstrings + s->sh_name;
if (strcmp(".ARM.exidx.init.text", secname) == 0)
maps[ARM_SEC_INIT].unw_sec = s;
else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
maps[ARM_SEC_DEVINIT].unw_sec = s;
else if (strcmp(".ARM.exidx", secname) == 0)
maps[ARM_SEC_CORE].unw_sec = s;
else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
maps[ARM_SEC_EXIT].unw_sec = s;
else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
maps[ARM_SEC_DEVEXIT].unw_sec = s;
else if (strcmp(".init.text", secname) == 0)
maps[ARM_SEC_INIT].sec_text = s;
else if (strcmp(".devinit.text", secname) == 0)
maps[ARM_SEC_DEVINIT].sec_text = s;
else if (strcmp(".text", secname) == 0)
maps[ARM_SEC_CORE].sec_text = s;
else if (strcmp(".exit.text", secname) == 0)
maps[ARM_SEC_EXIT].sec_text = s;
else if (strcmp(".devexit.text", secname) == 0)
maps[ARM_SEC_DEVEXIT].sec_text = s;
}
#endif
return 0;
......@@ -292,31 +303,22 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
#ifdef CONFIG_ARM_UNWIND
static void register_unwind_tables(struct module *mod)
{
if (mod->arch.unw_sec_init && mod->arch.sec_init_text)
mod->arch.unwind_init =
unwind_table_add(mod->arch.unw_sec_init->sh_addr,
mod->arch.unw_sec_init->sh_size,
mod->arch.sec_init_text->sh_addr,
mod->arch.sec_init_text->sh_size);
if (mod->arch.unw_sec_devinit && mod->arch.sec_devinit_text)
mod->arch.unwind_devinit =
unwind_table_add(mod->arch.unw_sec_devinit->sh_addr,
mod->arch.unw_sec_devinit->sh_size,
mod->arch.sec_devinit_text->sh_addr,
mod->arch.sec_devinit_text->sh_size);
if (mod->arch.unw_sec_core && mod->arch.sec_core_text)
mod->arch.unwind_core =
unwind_table_add(mod->arch.unw_sec_core->sh_addr,
mod->arch.unw_sec_core->sh_size,
mod->arch.sec_core_text->sh_addr,
mod->arch.sec_core_text->sh_size);
int i;
for (i = 0; i < ARM_SEC_MAX; ++i) {
struct arm_unwind_mapping *map = &mod->arch.map[i];
if (map->unw_sec && map->sec_text)
map->unwind = unwind_table_add(map->unw_sec->sh_addr,
map->unw_sec->sh_size,
map->sec_text->sh_addr,
map->sec_text->sh_size);
}
}
static void unregister_unwind_tables(struct module *mod)
{
unwind_table_del(mod->arch.unwind_init);
unwind_table_del(mod->arch.unwind_devinit);
unwind_table_del(mod->arch.unwind_core);
int i = ARM_SEC_MAX;
while (--i >= 0)
unwind_table_del(mod->arch.map[i].unwind);
}
#else
static inline void register_unwind_tables(struct module *mod) { }
......
arch/arm/kernel/process.c
浏览文件 @ b5153163
......@@ -29,6 +29,7 @@
#include <linux/utsname.h>
#include <linux/uaccess.h>
#include <linux/random.h>
#include <linux/hw_breakpoint.h>
#include <asm/cacheflush.h>
#include <asm/leds.h>
......@@ -135,6 +136,25 @@ EXPORT_SYMBOL(pm_power_off);
void (*arm_pm_restart)(char str, const char *cmd) = arm_machine_restart;
EXPORT_SYMBOL_GPL(arm_pm_restart);
static void do_nothing(void *unused)
{
}
/*
* cpu_idle_wait - Used to ensure that all the CPUs discard old value of
* pm_idle and update to new pm_idle value. Required while changing pm_idle
* handler on SMP systems.
*
* Caller must have changed pm_idle to the new value before the call. Old
* pm_idle value will not be used by any CPU after the return of this function.
*/
void cpu_idle_wait(void)
{
smp_mb();
/* kick all the CPUs so that they exit out of pm_idle */
smp_call_function(do_nothing, NULL, 1);
}
EXPORT_SYMBOL_GPL(cpu_idle_wait);
/*
* This is our default idle handler. We need to disable
......@@ -317,6 +337,8 @@ void flush_thread(void)
struct thread_info *thread = current_thread_info();
struct task_struct *tsk = current;
flush_ptrace_hw_breakpoint(tsk);
memset(thread->used_cp, 0, sizeof(thread->used_cp));
memset(&tsk->thread.debug, 0, sizeof(struct debug_info));
memset(&thread->fpstate, 0, sizeof(union fp_state));
......@@ -345,6 +367,8 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start,
thread->cpu_context.sp = (unsigned long)childregs;
thread->cpu_context.pc = (unsigned long)ret_from_fork;
clear_ptrace_hw_breakpoint(p);
if (clone_flags & CLONE_SETTLS)
thread->tp_value = regs->ARM_r3;
......@@ -458,3 +482,24 @@ unsigned long arch_randomize_brk(struct mm_struct *mm)
unsigned long range_end = mm->brk + 0x02000000;
return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
}
/*
* The vectors page is always readable from user space for the
* atomic helpers and the signal restart code. Let's declare a mapping
* for it so it is visible through ptrace and /proc/<pid>/mem.
*/
int vectors_user_mapping(void)
{
struct mm_struct *mm = current->mm;
return install_special_mapping(mm, 0xffff0000, PAGE_SIZE,
VM_READ | VM_EXEC |
VM_MAYREAD | VM_MAYEXEC |
VM_ALWAYSDUMP | VM_RESERVED,
NULL);
}
const char *arch_vma_name(struct vm_area_struct *vma)
{
return (vma->vm_start == 0xffff0000) ? "[vectors]" : NULL;
}
arch/arm/kernel/ptrace.c
浏览文件 @ b5153163
......@@ -19,6 +19,8 @@
#include <linux/init.h>
#include <linux/signal.h>
#include <linux/uaccess.h>
#include <linux/perf_event.h>
#include <linux/hw_breakpoint.h>
#include <asm/pgtable.h>
#include <asm/system.h>
......@@ -847,6 +849,232 @@ static int ptrace_setvfpregs(struct task_struct *tsk, void __user *data)
}
#endif
#ifdef CONFIG_HAVE_HW_BREAKPOINT
/*
* Convert a virtual register number into an index for a thread_info
* breakpoint array. Breakpoints are identified using positive numbers
* whilst watchpoints are negative. The registers are laid out as pairs
* of (address, control), each pair mapping to a unique hw_breakpoint struct.
* Register 0 is reserved for describing resource information.
*/
static int ptrace_hbp_num_to_idx(long num)
{
if (num < 0)
num = (ARM_MAX_BRP << 1) - num;
return (num - 1) >> 1;
}
/*
* Returns the virtual register number for the address of the
* breakpoint at index idx.
*/
static long ptrace_hbp_idx_to_num(int idx)
{
long mid = ARM_MAX_BRP << 1;
long num = (idx << 1) + 1;
return num > mid ? mid - num : num;
}
/*
* Handle hitting a HW-breakpoint.
*/
static void ptrace_hbptriggered(struct perf_event *bp, int unused,
struct perf_sample_data *data,
struct pt_regs *regs)
{
struct arch_hw_breakpoint *bkpt = counter_arch_bp(bp);
long num;
int i;
siginfo_t info;
for (i = 0; i < ARM_MAX_HBP_SLOTS; ++i)
if (current->thread.debug.hbp[i] == bp)
break;
num = (i == ARM_MAX_HBP_SLOTS) ? 0 : ptrace_hbp_idx_to_num(i);
info.si_signo = SIGTRAP;
info.si_errno = (int)num;
info.si_code = TRAP_HWBKPT;
info.si_addr = (void __user *)(bkpt->trigger);
force_sig_info(SIGTRAP, &info, current);
}
/*
* Set ptrace breakpoint pointers to zero for this task.
* This is required in order to prevent child processes from unregistering
* breakpoints held by their parent.
*/
void clear_ptrace_hw_breakpoint(struct task_struct *tsk)
{
memset(tsk->thread.debug.hbp, 0, sizeof(tsk->thread.debug.hbp));
}
/*
* Unregister breakpoints from this task and reset the pointers in
* the thread_struct.
*/
void flush_ptrace_hw_breakpoint(struct task_struct *tsk)
{
int i;
struct thread_struct *t = &tsk->thread;
for (i = 0; i < ARM_MAX_HBP_SLOTS; i++) {
if (t->debug.hbp[i]) {
unregister_hw_breakpoint(t->debug.hbp[i]);
t->debug.hbp[i] = NULL;
}
}
}
static u32 ptrace_get_hbp_resource_info(void)
{
u8 num_brps, num_wrps, debug_arch, wp_len;
u32 reg = 0;
num_brps = hw_breakpoint_slots(TYPE_INST);
num_wrps = hw_breakpoint_slots(TYPE_DATA);
debug_arch = arch_get_debug_arch();
wp_len = arch_get_max_wp_len();
reg |= debug_arch;
reg <<= 8;
reg |= wp_len;
reg <<= 8;
reg |= num_wrps;
reg <<= 8;
reg |= num_brps;
return reg;
}
static struct perf_event *ptrace_hbp_create(struct task_struct *tsk, int type)
{
struct perf_event_attr attr;
ptrace_breakpoint_init(&attr);
/* Initialise fields to sane defaults. */
attr.bp_addr = 0;
attr.bp_len = HW_BREAKPOINT_LEN_4;
attr.bp_type = type;
attr.disabled = 1;
return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, tsk);
}
static int ptrace_gethbpregs(struct task_struct *tsk, long num,
unsigned long __user *data)
{
u32 reg;
int idx, ret = 0;
struct perf_event *bp;
struct arch_hw_breakpoint_ctrl arch_ctrl;
if (num == 0) {
reg = ptrace_get_hbp_resource_info();
} else {
idx = ptrace_hbp_num_to_idx(num);
if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
ret = -EINVAL;
goto out;
}
bp = tsk->thread.debug.hbp[idx];
if (!bp) {
reg = 0;
goto put;
}
arch_ctrl = counter_arch_bp(bp)->ctrl;
/*
* Fix up the len because we may have adjusted it
* to compensate for an unaligned address.
*/
while (!(arch_ctrl.len & 0x1))
arch_ctrl.len >>= 1;
if (idx & 0x1)
reg = encode_ctrl_reg(arch_ctrl);
else
reg = bp->attr.bp_addr;
}
put:
if (put_user(reg, data))
ret = -EFAULT;
out:
return ret;
}
static int ptrace_sethbpregs(struct task_struct *tsk, long num,
unsigned long __user *data)
{
int idx, gen_len, gen_type, implied_type, ret = 0;
u32 user_val;
struct perf_event *bp;
struct arch_hw_breakpoint_ctrl ctrl;
struct perf_event_attr attr;
if (num == 0)
goto out;
else if (num < 0)
implied_type = HW_BREAKPOINT_RW;
else
implied_type = HW_BREAKPOINT_X;
idx = ptrace_hbp_num_to_idx(num);
if (idx < 0 || idx >= ARM_MAX_HBP_SLOTS) {
ret = -EINVAL;
goto out;
}
if (get_user(user_val, data)) {
ret = -EFAULT;
goto out;
}
bp = tsk->thread.debug.hbp[idx];
if (!bp) {
bp = ptrace_hbp_create(tsk, implied_type);
if (IS_ERR(bp)) {
ret = PTR_ERR(bp);
goto out;
}
tsk->thread.debug.hbp[idx] = bp;
}
attr = bp->attr;
if (num & 0x1) {
/* Address */
attr.bp_addr = user_val;
} else {
/* Control */
decode_ctrl_reg(user_val, &ctrl);
ret = arch_bp_generic_fields(ctrl, &gen_len, &gen_type);
if (ret)
goto out;
if ((gen_type & implied_type) != gen_type) {
ret = -EINVAL;
goto out;
}
attr.bp_len = gen_len;
attr.bp_type = gen_type;
attr.disabled = !ctrl.enabled;
}
ret = modify_user_hw_breakpoint(bp, &attr);
out:
return ret;
}
#endif
long arch_ptrace(struct task_struct *child, long request, long addr, long data)
{
int ret;
......@@ -916,6 +1144,17 @@ long arch_ptrace(struct task_struct *child, long request, long addr, long data)
break;
#endif
#ifdef CONFIG_HAVE_HW_BREAKPOINT
case PTRACE_GETHBPREGS:
ret = ptrace_gethbpregs(child, addr,
(unsigned long __user *)data);
break;
case PTRACE_SETHBPREGS:
ret = ptrace_sethbpregs(child, addr,
(unsigned long __user *)data);
break;
#endif
default:
ret = ptrace_request(child, request, addr, data);
break;
......
arch/arm/kernel/setup.c
浏览文件 @ b5153163
......@@ -36,6 +36,7 @@
#include <asm/procinfo.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/smp_plat.h>
#include <asm/mach-types.h>
#include <asm/cacheflush.h>
#include <asm/cachetype.h>
......@@ -238,6 +239,35 @@ int cpu_architecture(void)
return cpu_arch;
}
static int cpu_has_aliasing_icache(unsigned int arch)
{
int aliasing_icache;
unsigned int id_reg, num_sets, line_size;
/* arch specifies the register format */
switch (arch) {
case CPU_ARCH_ARMv7:
asm("mcr p15, 2, %0, c0, c0, 0 @ set CSSELR"
: /* No output operands */
: "r" (1));
isb();
asm("mrc p15, 1, %0, c0, c0, 0 @ read CCSIDR"
: "=r" (id_reg));
line_size = 4 << ((id_reg & 0x7) + 2);
num_sets = ((id_reg >> 13) & 0x7fff) + 1;
aliasing_icache = (line_size * num_sets) > PAGE_SIZE;
break;
case CPU_ARCH_ARMv6:
aliasing_icache = read_cpuid_cachetype() & (1 << 11);
break;
default:
/* I-cache aliases will be handled by D-cache aliasing code */
aliasing_icache = 0;
}
return aliasing_icache;
}
static void __init cacheid_init(void)
{
unsigned int cachetype = read_cpuid_cachetype();
......@@ -249,10 +279,15 @@ static void __init cacheid_init(void)
cacheid = CACHEID_VIPT_NONALIASING;
if ((cachetype & (3 << 14)) == 1 << 14)
cacheid |= CACHEID_ASID_TAGGED;
} else if (cachetype & (1 << 23))
else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7))
cacheid |= CACHEID_VIPT_I_ALIASING;
} else if (cachetype & (1 << 23)) {
cacheid = CACHEID_VIPT_ALIASING;
else
} else {
cacheid = CACHEID_VIPT_NONALIASING;
if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6))
cacheid |= CACHEID_VIPT_I_ALIASING;
}
} else {
cacheid = CACHEID_VIVT;
}
......@@ -263,7 +298,7 @@ static void __init cacheid_init(void)
cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown",
cache_is_vivt() ? "VIVT" :
icache_is_vivt_asid_tagged() ? "VIVT ASID tagged" :
cache_is_vipt_aliasing() ? "VIPT aliasing" :
icache_is_vipt_aliasing() ? "VIPT aliasing" :
cache_is_vipt_nonaliasing() ? "VIPT nonaliasing" : "unknown");
}
......@@ -490,7 +525,7 @@ request_standard_resources(struct meminfo *mi, struct machine_desc *mdesc)
kernel_code.start = virt_to_phys(_text);
kernel_code.end = virt_to_phys(_etext - 1);
kernel_data.start = virt_to_phys(_data);
kernel_data.start = virt_to_phys(_sdata);
kernel_data.end = virt_to_phys(_end - 1);
for (i = 0; i < mi->nr_banks; i++) {
......@@ -825,7 +860,8 @@ void __init setup_arch(char **cmdline_p)
request_standard_resources(&meminfo, mdesc);
#ifdef CONFIG_SMP
smp_init_cpus();
if (is_smp())
smp_init_cpus();
#endif
reserve_crashkernel();
......
arch/arm/kernel/smp.c
浏览文件 @ b5153163
......@@ -33,6 +33,7 @@
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
#include <asm/sections.h>
#include <asm/tlbflush.h>
#include <asm/ptrace.h>
#include <asm/localtimer.h>
......@@ -67,12 +68,47 @@ enum ipi_msg_type {
IPI_CPU_STOP,
};
static inline void identity_mapping_add(pgd_t *pgd, unsigned long start,
unsigned long end)
{
unsigned long addr, prot;
pmd_t *pmd;
prot = PMD_TYPE_SECT | PMD_SECT_AP_WRITE;
if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
prot |= PMD_BIT4;
for (addr = start & PGDIR_MASK; addr < end;) {
pmd = pmd_offset(pgd + pgd_index(addr), addr);
pmd[0] = __pmd(addr | prot);
addr += SECTION_SIZE;
pmd[1] = __pmd(addr | prot);
addr += SECTION_SIZE;
flush_pmd_entry(pmd);
outer_clean_range(__pa(pmd), __pa(pmd + 1));
}
}
static inline void identity_mapping_del(pgd_t *pgd, unsigned long start,
unsigned long end)
{
unsigned long addr;
pmd_t *pmd;
for (addr = start & PGDIR_MASK; addr < end; addr += PGDIR_SIZE) {
pmd = pmd_offset(pgd + pgd_index(addr), addr);
pmd[0] = __pmd(0);
pmd[1] = __pmd(0);
clean_pmd_entry(pmd);
outer_clean_range(__pa(pmd), __pa(pmd + 1));
}
}
int __cpuinit __cpu_up(unsigned int cpu)
{
struct cpuinfo_arm *ci = &per_cpu(cpu_data, cpu);
struct task_struct *idle = ci->idle;
pgd_t *pgd;
pmd_t *pmd;
int ret;
/*
......@@ -101,11 +137,16 @@ int __cpuinit __cpu_up(unsigned int cpu)
* a 1:1 mapping for the physical address of the kernel.
*/
pgd = pgd_alloc(&init_mm);
pmd = pmd_offset(pgd + pgd_index(PHYS_OFFSET), PHYS_OFFSET);
*pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
flush_pmd_entry(pmd);
outer_clean_range(__pa(pmd), __pa(pmd + 1));
if (!pgd)
return -ENOMEM;
if (PHYS_OFFSET != PAGE_OFFSET) {
#ifndef CONFIG_HOTPLUG_CPU
identity_mapping_add(pgd, __pa(__init_begin), __pa(__init_end));
#endif
identity_mapping_add(pgd, __pa(_stext), __pa(_etext));
identity_mapping_add(pgd, __pa(_sdata), __pa(_edata));
}
/*
* We need to tell the secondary core where to find
......@@ -143,8 +184,14 @@ int __cpuinit __cpu_up(unsigned int cpu)
secondary_data.stack = NULL;
secondary_data.pgdir = 0;
*pmd = __pmd(0);
clean_pmd_entry(pmd);
if (PHYS_OFFSET != PAGE_OFFSET) {
#ifndef CONFIG_HOTPLUG_CPU
identity_mapping_del(pgd, __pa(__init_begin), __pa(__init_end));
#endif
identity_mapping_del(pgd, __pa(_stext), __pa(_etext));
identity_mapping_del(pgd, __pa(_sdata), __pa(_edata));
}
pgd_free(&init_mm, pgd);
if (ret) {
......@@ -567,7 +614,8 @@ void smp_send_stop(void)
{
cpumask_t mask = cpu_online_map;
cpu_clear(smp_processor_id(), mask);
send_ipi_message(&mask, IPI_CPU_STOP);
if (!cpus_empty(mask))
send_ipi_message(&mask, IPI_CPU_STOP);
}
/*
......
arch/arm/kernel/unwind.c
浏览文件 @ b5153163
......@@ -146,6 +146,8 @@ static struct unwind_idx *unwind_find_idx(unsigned long addr)
addr < table->end_addr) {
idx = search_index(addr, table->start,
table->stop - 1);
/* Move-to-front to exploit common traces */
list_move(&table->list, &unwind_tables);
break;
}
}
......
arch/arm/kernel/vmlinux.lds.S
浏览文件 @ b5153163
......@@ -8,6 +8,19 @@
#include <asm/memory.h>
#include <asm/page.h>
#define PROC_INFO \
VMLINUX_SYMBOL(__proc_info_begin) = .; \
*(.proc.info.init) \
VMLINUX_SYMBOL(__proc_info_end) = .;
#ifdef CONFIG_HOTPLUG_CPU
#define ARM_CPU_DISCARD(x)
#define ARM_CPU_KEEP(x) x
#else
#define ARM_CPU_DISCARD(x) x
#define ARM_CPU_KEEP(x)
#endif
OUTPUT_ARCH(arm)
ENTRY(stext)
......@@ -31,15 +44,18 @@ SECTIONS
HEAD_TEXT
INIT_TEXT
_einittext = .;
__proc_info_begin = .;
*(.proc.info.init)
__proc_info_end = .;
ARM_CPU_DISCARD(PROC_INFO)
__arch_info_begin = .;
*(.arch.info.init)
__arch_info_end = .;
__tagtable_begin = .;
*(.taglist.init)
__tagtable_end = .;
#ifdef CONFIG_SMP_ON_UP
__smpalt_begin = .;
*(.alt.smp.init)
__smpalt_end = .;
#endif
INIT_SETUP(16)
......@@ -68,10 +84,8 @@ SECTIONS
/DISCARD/ : {
*(.ARM.exidx.exit.text)
*(.ARM.extab.exit.text)
#ifndef CONFIG_HOTPLUG_CPU
*(.ARM.exidx.cpuexit.text)
*(.ARM.extab.cpuexit.text)
#endif
ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text))
ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text))
#ifndef CONFIG_HOTPLUG
*(.ARM.exidx.devexit.text)
*(.ARM.extab.devexit.text)
......@@ -100,12 +114,11 @@ SECTIONS
*(.glue_7)
*(.glue_7t)
*(.got) /* Global offset table */
ARM_CPU_KEEP(PROC_INFO)
}
RO_DATA(PAGE_SIZE)
_etext = .; /* End of text and rodata section */
#ifdef CONFIG_ARM_UNWIND
/*
* Stack unwinding tables
......@@ -123,6 +136,8 @@ SECTIONS
}
#endif
_etext = .; /* End of text and rodata section */
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
. = PAGE_OFFSET + TEXT_OFFSET;
......@@ -237,6 +252,12 @@ SECTIONS
/* Default discards */
DISCARDS
#ifndef CONFIG_SMP_ON_UP
/DISCARD/ : {
*(.alt.smp.init)
}
#endif
}
/*
......
arch/arm/mach-aaec2000/aaed2000.c
浏览文件 @ b5153163
......@@ -95,8 +95,6 @@ static void __init aaed2000_map_io(void)
MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
/* Maintainer: Nicolas Bellido Y Ortega */
.phys_io = PIO_BASE,
.io_pg_offst = ((VIO_BASE) >> 18) & 0xfffc,
.map_io = aaed2000_map_io,
.init_irq = aaed2000_init_irq,
.timer = &aaec2000_timer,
......
arch/arm/mach-aaec2000/include/mach/debug-macro.S
浏览文件 @ b5153163
......@@ -10,12 +10,10 @@
*/
#include "hardware.h"
.macro addruart, rx, tmp
mrc p15, 0, \rx, c1, c0
tst \rx, #1 @ MMU enabled?
moveq \rx, #0x80000000 @ physical
movne \rx, #io_p2v(0x80000000) @ virtual
orr \rx, \rx, #0x00000800
.macro addruart, rp, rv
mov \rp, 0x00000800
orr \rv, \rp, #io_p2v(0x80000000) @ virtual
orr \rp, \rp, #0x80000000 @ physical
.endm
.macro senduart,rd,rx
......
arch/arm/mach-aaec2000/include/mach/vmalloc.h
浏览文件 @ b5153163
......@@ -11,6 +11,6 @@
#ifndef __ASM_ARCH_VMALLOC_H
#define __ASM_ARCH_VMALLOC_H
#define VMALLOC_END (PAGE_OFFSET + 0x10000000)
#define VMALLOC_END 0xd0000000
#endif /* __ASM_ARCH_VMALLOC_H */
arch/arm/mach-at91/Kconfig
浏览文件 @ b5153163
......@@ -33,6 +33,7 @@ config ARCH_AT91SAM9260
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
select HAVE_NET_MACB
config ARCH_AT91SAM9261
bool "AT91SAM9261"
......@@ -51,6 +52,7 @@ config ARCH_AT91SAM9263
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_NET_MACB
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
......@@ -66,6 +68,7 @@ config ARCH_AT91SAM9G20
select HAVE_AT91_USART3
select HAVE_AT91_USART4
select HAVE_AT91_USART5
select HAVE_NET_MACB
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
......@@ -73,6 +76,7 @@ config ARCH_AT91SAM9G45
select GENERIC_CLOCKEVENTS
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
select HAVE_NET_MACB
config ARCH_AT91CAP9
bool "AT91CAP9"
......@@ -248,6 +252,12 @@ config MACH_CPU9260
Select this if you are using a Eukrea Electromatique's
CPU9260 Board <http://www.eukrea.com/>
config MACH_FLEXIBITY
bool "Flexibity Connect board"
help
Select this if you are using Flexibity Connect board
<http://www.flexibity.com>
endif
# ----------------------------------------------------------
......@@ -338,6 +348,7 @@ config MACH_AT91SAM9G20EK
that embeds only one SD/MMC slot.
config MACH_AT91SAM9G20EK_2MMC
depends on MACH_AT91SAM9G20EK
bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
......@@ -383,8 +394,8 @@ if ARCH_AT91SAM9G45
comment "AT91SAM9G45 Board Type"
config MACH_AT91SAM9G45EKES
bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
config MACH_AT91SAM9M10G45EK
bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
select HAVE_NAND_ATMEL_BUSWIDTH_16
help
Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
......
arch/arm/mach-at91/Makefile
浏览文件 @ b5153163
......@@ -46,6 +46,7 @@ obj-$(CONFIG_MACH_USB_A9260) += board-usb-a9260.o
obj-$(CONFIG_MACH_QIL_A9260) += board-qil-a9260.o
obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o
# AT91SAM9261 board-specific support
obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
......@@ -61,7 +62,6 @@ obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
# AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
obj-$(CONFIG_MACH_AT91SAM9G20EK_2MMC) += board-sam9g20ek-2slot-mmc.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
......@@ -70,7 +70,7 @@ obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
# AT91SAM9G45 board-specific support
obj-$(CONFIG_MACH_AT91SAM9G45EKES) += board-sam9m10g45ek.o
obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
# AT91CAP9 board-specific support
obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o
......
arch/arm/mach-at91/board-1arm.c
浏览文件 @ b5153163
......@@ -92,8 +92,6 @@ static void __init onearm_board_init(void)
MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = onearm_map_io,
......
arch/arm/mach-at91/board-afeb-9260v1.c
浏览文件 @ b5153163
......@@ -218,8 +218,6 @@ static void __init afeb9260_board_init(void)
MACHINE_START(AFEB9260, "Custom afeb9260 board")
/* Maintainer: Sergey Lapin <slapin@ossfans.org> */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = afeb9260_map_io,
......
arch/arm/mach-at91/board-at572d940hf_ek.c
浏览文件 @ b5153163
......@@ -216,7 +216,7 @@ static struct atmel_nand_data __initdata eb_nand_data = {
/* .rdy_pin = AT91_PIN_PC16, */
.enable_pin = AT91_PIN_PA15,
.partition_info = nand_partitions,
#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#else
.bus_width_16 = 0,
......@@ -318,8 +318,6 @@ static void __init eb_board_init(void)
MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB")
/* Maintainer: Atmel <costa.antonior@gmail.com> */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = eb_map_io,
......
arch/arm/mach-at91/board-cam60.c
浏览文件 @ b5153163
......@@ -198,8 +198,6 @@ static void __init cam60_board_init(void)
MACHINE_START(CAM60, "KwikByte CAM60")
/* Maintainer: KwikByte */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = cam60_map_io,
......
arch/arm/mach-at91/board-cap9adk.c
浏览文件 @ b5153163
......@@ -399,8 +399,6 @@ static void __init cap9adk_board_init(void)
MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK")
/* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = cap9adk_map_io,
......
arch/arm/mach-at91/board-carmeva.c
浏览文件 @ b5153163
......@@ -162,8 +162,6 @@ static void __init carmeva_board_init(void)
MACHINE_START(CARMEVA, "Carmeva")
/* Maintainer: Conitec Datasystems */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = carmeva_map_io,
......
arch/arm/mach-at91/board-cpu9krea.c
浏览文件 @ b5153163
......@@ -375,8 +375,6 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260")
MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
#endif
/* Maintainer: Eric Benard - EUKREA Electromatique */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = cpu9krea_map_io,
......
arch/arm/mach-at91/board-cpuat91.c
浏览文件 @ b5153163
......@@ -175,8 +175,6 @@ static void __init cpuat91_board_init(void)
MACHINE_START(CPUAT91, "Eukrea")
/* Maintainer: Eric Benard - EUKREA Electromatique */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = cpuat91_map_io,
......
arch/arm/mach-at91/board-csb337.c
浏览文件 @ b5153163
......@@ -257,8 +257,6 @@ static void __init csb337_board_init(void)
MACHINE_START(CSB337, "Cogent CSB337")
/* Maintainer: Bill Gatliff */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = csb337_map_io,
......
arch/arm/mach-at91/board-csb637.c
浏览文件 @ b5153163
......@@ -138,8 +138,6 @@ static void __init csb637_board_init(void)
MACHINE_START(CSB637, "Cogent CSB637")
/* Maintainer: Bill Gatliff */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = csb637_map_io,
......
arch/arm/mach-at91/board-dk.c
浏览文件 @ b5153163
......@@ -225,8 +225,6 @@ static void __init dk_board_init(void)
MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
/* Maintainer: SAN People/Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = dk_map_io,
......
arch/arm/mach-at91/board-eb9200.c
浏览文件 @ b5153163
......@@ -120,8 +120,6 @@ static void __init eb9200_board_init(void)
}
MACHINE_START(ATEB9200, "Embest ATEB9200")
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = eb9200_map_io,
......
arch/arm/mach-at91/board-ecbat91.c
浏览文件 @ b5153163
......@@ -168,8 +168,6 @@ static void __init ecb_at91board_init(void)
MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
/* Maintainer: emQbit.com */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = ecb_at91map_io,
......
arch/arm/mach-at91/board-eco920.c
浏览文件 @ b5153163
......@@ -148,8 +148,6 @@ static void __init eco920_board_init(void)
MACHINE_START(ECO920, "eco920")
/* Maintainer: Sascha Hauer */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = eco920_map_io,
......
arch/arm/mach-at91/board-ek.c
浏览文件 @ b5153163
......@@ -191,8 +191,6 @@ static void __init ek_board_init(void)
MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
/* Maintainer: SAN People/Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-flexibity.c 0 → 100644
浏览文件 @ b5153163
/*
* linux/arch/arm/mach-at91/board-flexibity.c
*
* Copyright (C) 2010 Flexibity
* Copyright (C) 2005 SAN People
* Copyright (C) 2006 Atmel
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/board.h>
#include "generic.h"
static void __init flexibity_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
/* DBGU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
/* set serial console to ttyS0 (ie, DBGU) */
at91_set_serial_console(0);
}
static void __init flexibity_init_irq(void)
{
at91sam9260_init_interrupts(NULL);
}
/* USB Host port */
static struct at91_usbh_data __initdata flexibity_usbh_data = {
.ports = 2,
};
/* USB Device port */
static struct at91_udc_data __initdata flexibity_udc_data = {
.vbus_pin = AT91_PIN_PC5,
.pullup_pin = 0, /* pull-up driven by UDC */
};
/* SPI devices */
static struct spi_board_info flexibity_spi_devices[] = {
{ /* DataFlash chip */
.modalias = "mtd_dataflash",
.chip_select = 1,
.max_speed_hz = 15 * 1000 * 1000,
.bus_num = 0,
},
};
/* MCI (SD/MMC) */
static struct at91_mmc_data __initdata flexibity_mmc_data = {
.slot_b = 0,
.wire4 = 1,
.det_pin = AT91_PIN_PC9,
.wp_pin = AT91_PIN_PC4,
};
/* LEDs */
static struct gpio_led flexibity_leds[] = {
{
.name = "usb1:green",
.gpio = AT91_PIN_PA12,
.active_low = 1,
.default_trigger = "default-on",
},
{
.name = "usb1:red",
.gpio = AT91_PIN_PA13,
.active_low = 1,
.default_trigger = "default-on",
},
{
.name = "usb2:green",
.gpio = AT91_PIN_PB26,
.active_low = 1,
.default_trigger = "default-on",
},
{
.name = "usb2:red",
.gpio = AT91_PIN_PB27,
.active_low = 1,
.default_trigger = "default-on",
},
{
.name = "usb3:green",
.gpio = AT91_PIN_PC8,
.active_low = 1,
.default_trigger = "default-on",
},
{
.name = "usb3:red",
.gpio = AT91_PIN_PC6,
.active_low = 1,
.default_trigger = "default-on",
},
{
.name = "usb4:green",
.gpio = AT91_PIN_PB4,
.active_low = 1,
.default_trigger = "default-on",
},
{
.name = "usb4:red",
.gpio = AT91_PIN_PB5,
.active_low = 1,
.default_trigger = "default-on",
}
};
static void __init flexibity_board_init(void)
{
/* Serial */
at91_add_device_serial();
/* USB Host */
at91_add_device_usbh(&flexibity_usbh_data);
/* USB Device */
at91_add_device_udc(&flexibity_udc_data);
/* SPI */
at91_add_device_spi(flexibity_spi_devices,
ARRAY_SIZE(flexibity_spi_devices));
/* MMC */
at91_add_device_mmc(0, &flexibity_mmc_data);
/* LEDs */
at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
}
MACHINE_START(FLEXIBITY, "Flexibity Connect")
/* Maintainer: Maxim Osipov */
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = flexibity_map_io,
.init_irq = flexibity_init_irq,
.init_machine = flexibity_board_init,
MACHINE_END
arch/arm/mach-at91/board-kafa.c
浏览文件 @ b5153163
......@@ -99,8 +99,6 @@ static void __init kafa_board_init(void)
MACHINE_START(KAFA, "Sperry-Sun KAFA")
/* Maintainer: Sergei Sharonov */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = kafa_map_io,
......
arch/arm/mach-at91/board-kb9202.c
浏览文件 @ b5153163
......@@ -136,8 +136,6 @@ static void __init kb9202_board_init(void)
MACHINE_START(KB9200, "KB920x")
/* Maintainer: KwikByte, Inc. */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = kb9202_map_io,
......
arch/arm/mach-at91/board-neocore926.c
浏览文件 @ b5153163
......@@ -387,8 +387,6 @@ static void __init neocore926_board_init(void)
MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926")
/* Maintainer: ADENEO */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = neocore926_map_io,
......
arch/arm/mach-at91/board-picotux200.c
浏览文件 @ b5153163
......@@ -156,8 +156,6 @@ static void __init picotux200_board_init(void)
MACHINE_START(PICOTUX2XX, "picotux 200")
/* Maintainer: Kleinhenz Elektronik GmbH */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = picotux200_map_io,
......
arch/arm/mach-at91/board-qil-a9260.c
浏览文件 @ b5153163
......@@ -268,8 +268,6 @@ static void __init ek_board_init(void)
MACHINE_START(QIL_A9260, "CALAO QIL_A9260")
/* Maintainer: calao-systems */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-sam9-l9260.c
浏览文件 @ b5153163
......@@ -212,8 +212,6 @@ static void __init ek_board_init(void)
MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
/* Maintainer: Olimex */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-sam9260ek.c
浏览文件 @ b5153163
......@@ -356,8 +356,6 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-sam9261ek.c
浏览文件 @ b5153163
......@@ -623,8 +623,6 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
#endif
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-sam9263ek.c
浏览文件 @ b5153163
......@@ -454,8 +454,6 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-sam9m10g45ek.c
浏览文件 @ b5153163
......@@ -135,7 +135,7 @@ static struct atmel_nand_data __initdata ek_nand_data = {
.rdy_pin = AT91_PIN_PC8,
.enable_pin = AT91_PIN_PC14,
.partition_info = nand_partitions,
#if defined(CONFIG_MTD_NAND_AT91_BUSWIDTH_16)
#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16)
.bus_width_16 = 1,
#else
.bus_width_16 = 0,
......@@ -399,10 +399,8 @@ static void __init ek_board_init(void)
at91_pwm_leds(ek_pwm_led, ARRAY_SIZE(ek_pwm_led));
}
MACHINE_START(AT91SAM9G45EKES, "Atmel AT91SAM9G45-EKES")
MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-sam9rlek.c
浏览文件 @ b5153163
......@@ -329,8 +329,6 @@ static void __init ek_board_init(void)
MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
/* Maintainer: Atmel */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-snapper9260.c
浏览文件 @ b5153163
......@@ -177,8 +177,6 @@ static void __init snapper9260_board_init(void)
}
MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = snapper9260_map_io,
......
arch/arm/mach-at91/board-stamp9g20.c
浏览文件 @ b5153163
......@@ -294,8 +294,6 @@ static void __init stamp9g20_board_init(void)
MACHINE_START(PORTUXG20, "taskit PortuxG20")
/* Maintainer: taskit GmbH */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = portuxg20_map_io,
......@@ -305,8 +303,6 @@ MACHINE_END
MACHINE_START(STAMP9G20, "taskit Stamp9G20")
/* Maintainer: taskit GmbH */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = stamp9g20_map_io,
......
arch/arm/mach-at91/board-usb-a9260.c
浏览文件 @ b5153163
......@@ -228,8 +228,6 @@ static void __init ek_board_init(void)
MACHINE_START(USB_A9260, "CALAO USB_A9260")
/* Maintainer: calao-systems */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-usb-a9263.c
浏览文件 @ b5153163
......@@ -244,8 +244,6 @@ static void __init ek_board_init(void)
MACHINE_START(USB_A9263, "CALAO USB_A9263")
/* Maintainer: calao-systems */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
.map_io = ek_map_io,
......
arch/arm/mach-at91/board-yl-9200.c
浏览文件 @ b5153163
......@@ -594,8 +594,6 @@ static void __init yl9200_board_init(void)
MACHINE_START(YL9200, "uCdragon YL-9200")
/* Maintainer: S.Birtles */
.phys_io = AT91_BASE_SYS,
.io_pg_offst = (AT91_VA_BASE_SYS >> 18) & 0xfffc,
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91rm9200_timer,
.map_io = yl9200_map_io,
......
arch/arm/mach-at91/include/mach/at91x40.h
浏览文件 @ b5153163
......@@ -52,4 +52,10 @@
#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */
#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */
/*
* Support defines for the simple Power Controller module.
*/
#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */
#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */
#endif /* AT91X40_H */
arch/arm/mach-bcmring/arch.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-clps711x/autcpu12.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-clps711x/cdb89712.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-clps711x/ceiva.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-clps711x/clep7312.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-clps711x/fortunet.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-clps711x/p720t.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-cns3xxx/cns3420vb.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-dove/dove-db-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ebsa110/core.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ep93xx/adssphere.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ep93xx/edb93xx.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ep93xx/gesbc9312.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ep93xx/micro9.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ep93xx/simone.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ep93xx/snappercl15.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ep93xx/ts72xx.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-footbridge/cats-hw.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-footbridge/ebsa285.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-footbridge/personal.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-gemini/board-rut1xx.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-gemini/board-wbd111.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-gemini/board-wbd222.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-h720x/h7201-eval.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-h720x/h7202-eval.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/clock-imx1.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/clock-imx21.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/clock-imx27.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/devices-imx1.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/devices-imx21.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/devices-imx27.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/devices.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/devices.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-cpuimx27.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-imx27_visstrim_m10.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-imx27lite.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-mx1ads.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-mx21ads.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-mx27_3ds.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-mx27ads.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-mxt_td60.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-pca100.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-pcm038.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-imx/mach-scb9328.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-iop13xx/iq81340mc.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-iop13xx/iq81340sc.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-iop32x/em7210.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-iop32x/glantank.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-iop32x/iq31244.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-iop32x/iq80321.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-iop32x/n2100.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-iop33x/iq80331.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-iop33x/iq80332.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp2000/enp2611.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp2000/ixdp2400.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp2000/ixdp2800.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp2000/ixdp2x01.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp23xx/espresso.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp23xx/ixdp2351.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp23xx/roadrunner.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp4xx/avila-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp4xx/coyote-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp4xx/fsg-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp4xx/goramo_mlr.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp4xx/nslu2-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ixp4xx/vulcan-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-kirkwood/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-kirkwood/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-kirkwood/d2net_v2-setup.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-kirkwood/dockstar-setup.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-kirkwood/include/mach/leds-netxbig.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-kirkwood/lacie_v2-common.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-kirkwood/lacie_v2-common.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ks8695/board-acs5k.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ks8695/board-dsm320.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ks8695/board-micrel.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-l7200/include/mach/debug-macro.S 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-lpc32xx/phy3250.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/aspenite.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/avengers_lite.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/common.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/flint.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/include/mach/teton_bga.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/jasper.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/pxa168.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/tavorevb.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/teton_bga.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mmp/ttc_dkb.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/board-halibut.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/board-mahimahi.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/board-msm7x27.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/board-msm7x30.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/board-msm8x60.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/board-qsd8x50.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/board-sapphire.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/board-trout.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/clock-dummy.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/devices-msm7x30.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/devices-msm8x60-iommu.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/devices-qsd8x50.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpio.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpio_hw.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpiomux-7x30.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpiomux-8x50.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpiomux-8x60.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpiomux-v1.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpiomux-v1.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpiomux-v2.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpiomux-v2.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpiomux.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/gpiomux.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/include/mach/entry-macro-qgic.S 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/include/mach/entry-macro-vic.S 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/include/mach/io.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/include/mach/iommu.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/include/mach/iommu_hw-8xxx.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/include/mach/irqs-8x60.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/include/mach/msm_iomap-8x60.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/include/mach/smp.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/io.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/iommu.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/iommu_dev.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-msm/timer.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx25/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx25/clock.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx25/devices-imx25.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx25/devices.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx25/devices.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx25/mach-cpuimx25.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx25/mach-mx25_3ds.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/clock-imx31.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/clock-imx35.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/cpu.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/devices-imx31.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/devices-imx35.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/devices.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/devices.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-cpuimx35.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-mx31_3ds.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-mx31ads.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-mx31lilly.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-mx31lite.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-mx35_3ds.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-pcm037.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-pcm037_eet.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-pcm043.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mach-qong.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx3/mm.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/board-cpuimx51.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/board-cpuimx51sd.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/board-mx51_3ds.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/board-mx51_efikamx.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/clock-mx51.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/cpu.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/devices-imx51.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/devices.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/devices.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-mxc91231/magx-zn5.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-netx/nxdb500.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-netx/nxdkn.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-netx/nxeb500hmi.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap1/board-fsample.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap1/board-generic.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap1/board-h2.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap1/board-h3.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap1/board-osk.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap1/board-palmte.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap1/board-palmtt.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap1/board-palmz71.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap1/board-sx1.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-2430sdp.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-3430sdp.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-3630sdp.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-4430sdp.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-apollon.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-cm-t35.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-generic.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-h4.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-ldp.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-n8x0.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-overo.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-rx51.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-zoom2.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-omap2/board-zoom3.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-orion5x/d2net-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-orion5x/mss2-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-orion5x/ts209-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-orion5x/ts409-setup.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pnx4008/core.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/balloon3.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/capc7117.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/cm-x2xx.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/cm-x300.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/colibri-pxa270.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/colibri-pxa300.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/colibri-pxa320.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/corgi.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/cpufreq-pxa3xx.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/csb726.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/devices.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/devices.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/em-x270.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/eseries.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/ezx.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/generic.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/generic.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/gumstix.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/h5000.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/himalaya.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/hx4700.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/icontrol.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/idp.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/include/mach/pxa3xx-u2d.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/littleton.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/lpd270.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/lubbock.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/magician.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/mainstone.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/mioa701.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/mp900.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/palmld.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/palmt5.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/palmtc.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/palmte2.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/palmtreo.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/palmtx.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/palmz72.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/pcm027.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/poodle.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/pxa3xx-ulpi.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/pxa3xx.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/pxa930.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/raumfeld.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/saar.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/spitz.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/stargate2.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/tavorevb.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/tavorevb3.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/tosa.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/trizeps4.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/viper.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/vpac270.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/xcep.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/z2.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/zeus.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-pxa/zylonite.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-realview/core.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-rpc/riscpc.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2410/mach-bast.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2410/mach-h1940.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2410/mach-n30.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2410/mach-otom.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2410/mach-qt2410.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2410/mach-vr1000.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2412/mach-jive.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2412/mach-vstms.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2440/mach-anubis.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2440/mach-gta02.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2440/mach-osiris.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2440/mach-rx1950.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c2440/mach-rx3715.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c64xx/mach-hmt.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c64xx/mach-ncp.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s3c64xx/mach-smartq.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5p6440/include/mach/map.h 已删除 100644 → 0
浏览文件 @ a8cbf225
此差异已折叠。
arch/arm/mach-s5p6442/cpu.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5p64x0/clock-s5p6450.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5p64x0/clock.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5p64x0/include/mach/i2c.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5p64x0/include/mach/map.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5p64x0/include/mach/regs-clock.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5p64x0/include/mach/s5p64x0-clock.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5p64x0/include/mach/uncompress.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5p64x0/mach-smdk6450.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5pc100/cpu.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5pv210/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5pv210/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5pv210/cpu.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5pv210/mach-aquila.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5pv210/mach-goni.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-s5pv310/cpu.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/assabet.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/badge4.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/cerf.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/collie.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/h3100.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/h3600.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/hackkit.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/jornada720.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/lart.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/pleb.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/shannon.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-sa1100/simpad.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-shark/core.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/Kconfig 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/Makefile 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/Makefile.boot 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/board-tcc8000-sdk.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/clock.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/common.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/devices.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/io.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/irq.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tcc8k/time.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-tegra/board-harmony.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-u300/u300.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/board-mop500-regulators.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/board-mop500-sdi.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/board-mop500.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/board-mop500.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/board-u5500.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/cpu-db5500.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/cpu-db8500.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/hotplug.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/include/mach/mbox.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/include/mach/prcmu-regs.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/include/mach/prcmu.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/mbox.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/modem_irq.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/pins-db5500.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/pins-db8500.h
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/platsmp.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/prcmu.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-ux500/ste-dma40-db5500.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mach-vexpress/ct-ca9x4.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/cache-v6.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/cache-v7.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/copypage-v4mc.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/copypage-v6.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/copypage-xscale.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/dma-mapping.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/fault-armv.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/fault.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/flush.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/init.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/mmap.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/mmu.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm1020.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm1020e.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm1022.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm1026.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm6_7.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm720.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm740.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm7tdmi.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm920.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm922.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm925.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm926.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm940.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm946.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-arm9tdmi.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-fa526.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-feroceon.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-mohawk.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-sa110.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-sa1100.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-v6.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-v7.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-xsc3.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/proc-xscale.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/mm/tlb-v7.S
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/audmux-v2.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/devices/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/devices/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/devices/platform-esdhc.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/devices/platform-fec.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/devices/platform-imx-dma.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/devices/platform-imx-ssi.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/ehci.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/epit.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/gpio.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/include/mach/board-mx31ads.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/include/mach/esdhc.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/include/mach/iram.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-mxc/iram_alloc.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-nomadik/gpio.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-s5p/Kconfig
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-s5p/Makefile
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-s5p/clock.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-s5p/cpu.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-s5p/dev-uart.c
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-s5p/include/plat/s5p6450.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/Kconfig 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/Makefile 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/clock.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/clkdev.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/clock.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/debug-macro.S 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/entry-macro.S 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/hardware.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/io.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/irqs.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/memory.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/system.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/tcc8k-regs.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/timex.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/uncompress.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/include/mach/vmalloc.h 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/arm/plat-tcc/system.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
arch/avr32/Kconfig
浏览文件 @ b5153163
此差异已折叠。
drivers/amba/bus.c
浏览文件 @ b5153163
此差异已折叠。
drivers/gpio/tc35892-gpio.c
浏览文件 @ b5153163
此差异已折叠。
drivers/input/keyboard/Kconfig
浏览文件 @ b5153163
此差异已折叠。
drivers/leds/Kconfig
浏览文件 @ b5153163
此差异已折叠。
drivers/leds/Makefile
浏览文件 @ b5153163
此差异已折叠。
drivers/leds/leds-netxbig.c 0 → 100644
浏览文件 @ b5153163
此差异已折叠。
drivers/leds/leds-ns2.c
浏览文件 @ b5153163
此差异已折叠。
drivers/mmc/host/mmci.c
浏览文件 @ b5153163
此差异已折叠。
drivers/mmc/host/mmci.h
浏览文件 @ b5153163
此差异已折叠。
drivers/net/Kconfig
浏览文件 @ b5153163
此差异已折叠。
drivers/serial/Kconfig
浏览文件 @ b5153163
此差异已折叠。
drivers/serial/samsung.c
浏览文件 @ b5153163
此差异已折叠。
drivers/spi/Kconfig
浏览文件 @ b5153163
此差异已折叠。
drivers/spi/spi_imx.c
浏览文件 @ b5153163
此差异已折叠。
drivers/usb/host/ohci-pxa27x.c
浏览文件 @ b5153163
此差异已折叠。
drivers/video/pxa168fb.c
浏览文件 @ b5153163
此差异已折叠。
fs/binfmt_elf.c
浏览文件 @ b5153163
此差异已折叠。
include/linux/amba/bus.h
浏览文件 @ b5153163
此差异已折叠。
include/linux/amba/mmci.h
浏览文件 @ b5153163
此差异已折叠。
include/linux/amba/serial.h
浏览文件 @ b5153163
此差异已折叠。
include/linux/mfd/tc35892.h
浏览文件 @ b5153163
此差异已折叠。
kernel/trace/Kconfig
浏览文件 @ b5153163
此差异已折叠。
scripts/Makefile.build
浏览文件 @ b5153163
此差异已折叠。
scripts/recordmcount.pl
浏览文件 @ b5153163
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或