i2c: Add generic I2C multiplexer using pinctrl API

This is useful for SoCs whose I2C module's signals can be routed to
different sets of pins at run-time, using the pinctrl API.

                                 +-----+  +-----+
                                 | dev |  | dev |
    +------------------------+   +-----+  +-----+
    | SoC                    |      |        |
    |                   /----|------+--------+
    |   +---+   +------+     | child bus A, on first set of pins
    |   |I2C|---|Pinmux|     |
    |   +---+   +------+     | child bus B, on second set of pins
    |                   \----|------+--------+--------+
    |                        |      |        |        |
    +------------------------+  +-----+  +-----+  +-----+
                                | dev |  | dev |  | dev |
                                +-----+  +-----+  +-----+
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NRob Herring <rob.herring@calxeda.com>
Signed-off-by: NWolfram Sang <w.sang@pengutronix.de>

Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt

+Pinctrl-based I2C Bus Mux
+
+This binding describes an I2C bus multiplexer that uses pin multiplexing to
+route the I2C signals, and represents the pin multiplexing configuration
+using the pinctrl device tree bindings.
+
+                                 +-----+  +-----+
+                                 | dev |  | dev |
+    +------------------------+   +-----+  +-----+
+    | SoC                    |      |        |
+    |                   /----|------+--------+
+    |   +---+   +------+     | child bus A, on first set of pins
+    |   |I2C|---|Pinmux|     |
+    |   +---+   +------+     | child bus B, on second set of pins
+    |                   \----|------+--------+--------+
+    |                        |      |        |        |
+    +------------------------+  +-----+  +-----+  +-----+
+                                | dev |  | dev |  | dev |
+                                +-----+  +-----+  +-----+
+
+Required properties:
+- compatible: i2c-mux-pinctrl
+- i2c-parent: The phandle of the I2C bus that this multiplexer's master-side
+  port is connected to.
+
+Also required are:
+
+* Standard pinctrl properties that specify the pin mux state for each child
+  bus. See ../pinctrl/pinctrl-bindings.txt.
+
+* Standard I2C mux properties. See mux.txt in this directory.
+
+* I2C child bus nodes. See mux.txt in this directory.
+
+For each named state defined in the pinctrl-names property, an I2C child bus
+will be created. I2C child bus numbers are assigned based on the index into
+the pinctrl-names property.
+
+The only exception is that no bus will be created for a state named "idle". If
+such a state is defined, it must be the last entry in pinctrl-names. For
+example:
+
+	pinctrl-names = "ddc", "pta", "idle"  ->  ddc = bus 0, pta = bus 1
+	pinctrl-names = "ddc", "idle", "pta"  ->  Invalid ("idle" not last)
+	pinctrl-names = "idle", "ddc", "pta"  ->  Invalid ("idle" not last)
+
+Whenever an access is made to a device on a child bus, the relevant pinctrl
+state will be programmed into hardware.
+
+If an idle state is defined, whenever an access is not being made to a device
+on a child bus, the idle pinctrl state will be programmed into hardware.
+
+If an idle state is not defined, the most recently used pinctrl state will be
+left programmed into hardware whenever no access is being made of a device on
+a child bus.
+
+Example:
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c1>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom {
+				compatible = "eeprom";
+				reg = <0x50>;
+			};
+		};
+
+		i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			eeprom {
+				compatible = "eeprom";
+				reg = <0x50>;
+			};
+		};
+	};
+

drivers/i2c/muxes/Kconfig

@@ -37,4 +37,16 @@ config I2C_MUX_PCA954x
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-mux-pca954x.
 
+config I2C_MUX_PINCTRL
+	tristate "pinctrl-based I2C multiplexer"
+	depends on PINCTRL
+	help
+	  If you say yes to this option, support will be included for an I2C
+	  multiplexer that uses the pinctrl subsystem, i.e. pin multiplexing.
+	  This is useful for SoCs whose I2C module's signals can be routed to
+	  different sets of pins at run-time.
+
+	  This driver can also be built as a module. If so, the module will be
+	  called pinctrl-i2cmux.
+
 endmenu

drivers/i2c/muxes/Makefile

@@ -4,5 +4,6 @@
 obj-$(CONFIG_I2C_MUX_GPIO)	+= i2c-mux-gpio.o
 obj-$(CONFIG_I2C_MUX_PCA9541)	+= i2c-mux-pca9541.o
 obj-$(CONFIG_I2C_MUX_PCA954x)	+= i2c-mux-pca954x.o
+obj-$(CONFIG_I2C_MUX_PINCTRL)	+= i2c-mux-pinctrl.o
 
 ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG

drivers/i2c/muxes/i2c-mux-pinctrl.c

+/*
+ * I2C multiplexer using pinctrl API
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/i2c.h>
+#include <linux/i2c-mux.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/of_i2c.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/i2c-mux-pinctrl.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+struct i2c_mux_pinctrl {
+	struct device *dev;
+	struct i2c_mux_pinctrl_platform_data *pdata;
+	struct pinctrl *pinctrl;
+	struct pinctrl_state **states;
+	struct pinctrl_state *state_idle;
+	struct i2c_adapter *parent;
+	struct i2c_adapter **busses;
+};
+
+static int i2c_mux_pinctrl_select(struct i2c_adapter *adap, void *data,
+				  u32 chan)
+{
+	struct i2c_mux_pinctrl *mux = data;
+
+	return pinctrl_select_state(mux->pinctrl, mux->states[chan]);
+}
+
+static int i2c_mux_pinctrl_deselect(struct i2c_adapter *adap, void *data,
+				    u32 chan)
+{
+	struct i2c_mux_pinctrl *mux = data;
+
+	return pinctrl_select_state(mux->pinctrl, mux->state_idle);
+}
+
+#ifdef CONFIG_OF
+static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
+				struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	int num_names, i, ret;
+	struct device_node *adapter_np;
+	struct i2c_adapter *adapter;
+
+	if (!np)
+		return 0;
+
+	mux->pdata = devm_kzalloc(&pdev->dev, sizeof(*mux->pdata), GFP_KERNEL);
+	if (!mux->pdata) {
+		dev_err(mux->dev,
+			"Cannot allocate i2c_mux_pinctrl_platform_data\n");
+		return -ENOMEM;
+	}
+
+	num_names = of_property_count_strings(np, "pinctrl-names");
+	if (num_names < 0) {
+		dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
+			num_names);
+		return num_names;
+	}
+
+	mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev,
+		sizeof(*mux->pdata->pinctrl_states) * num_names,
+		GFP_KERNEL);
+	if (!mux->pdata->pinctrl_states) {
+		dev_err(mux->dev, "Cannot allocate pinctrl_states\n");
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < num_names; i++) {
+		ret = of_property_read_string_index(np, "pinctrl-names", i,
+			&mux->pdata->pinctrl_states[mux->pdata->bus_count]);
+		if (ret < 0) {
+			dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n",
+				ret);
+			return ret;
+		}
+		if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count],
+			    "idle")) {
+			if (i != num_names - 1) {
+				dev_err(mux->dev, "idle state must be last\n");
+				return -EINVAL;
+			}
+			mux->pdata->pinctrl_state_idle = "idle";
+		} else {
+			mux->pdata->bus_count++;
+		}
+	}
+
+	adapter_np = of_parse_phandle(np, "i2c-parent", 0);
+	if (!adapter_np) {
+		dev_err(mux->dev, "Cannot parse i2c-parent\n");
+		return -ENODEV;
+	}
+	adapter = of_find_i2c_adapter_by_node(adapter_np);
+	if (!adapter) {
+		dev_err(mux->dev, "Cannot find parent bus\n");
+		return -ENODEV;
+	}
+	mux->pdata->parent_bus_num = i2c_adapter_id(adapter);
+	put_device(&adapter->dev);
+
+	return 0;
+}
+#else
+static inline int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux,
+					   struct platform_device *pdev)
+{
+	return 0;
+}
+#endif
+
+static int __devinit i2c_mux_pinctrl_probe(struct platform_device *pdev)
+{
+	struct i2c_mux_pinctrl *mux;
+	int (*deselect)(struct i2c_adapter *, void *, u32);
+	int i, ret;
+
+	mux = devm_kzalloc(&pdev->dev, sizeof(*mux), GFP_KERNEL);
+	if (!mux) {
+		dev_err(&pdev->dev, "Cannot allocate i2c_mux_pinctrl\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+	platform_set_drvdata(pdev, mux);
+
+	mux->dev = &pdev->dev;
+
+	mux->pdata = pdev->dev.platform_data;
+	if (!mux->pdata) {
+		ret = i2c_mux_pinctrl_parse_dt(mux, pdev);
+		if (ret < 0)
+			goto err;
+	}
+	if (!mux->pdata) {
+		dev_err(&pdev->dev, "Missing platform data\n");
+		ret = -ENODEV;
+		goto err;
+	}
+
+	mux->states = devm_kzalloc(&pdev->dev,
+				   sizeof(*mux->states) * mux->pdata->bus_count,
+				   GFP_KERNEL);
+	if (!mux->states) {
+		dev_err(&pdev->dev, "Cannot allocate states\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	mux->busses = devm_kzalloc(&pdev->dev,
+				   sizeof(mux->busses) * mux->pdata->bus_count,
+				   GFP_KERNEL);
+	if (!mux->states) {
+		dev_err(&pdev->dev, "Cannot allocate busses\n");
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	mux->pinctrl = devm_pinctrl_get(&pdev->dev);
+	if (IS_ERR(mux->pinctrl)) {
+		ret = PTR_ERR(mux->pinctrl);
+		dev_err(&pdev->dev, "Cannot get pinctrl: %d\n", ret);
+		goto err;
+	}
+	for (i = 0; i < mux->pdata->bus_count; i++) {
+		mux->states[i] = pinctrl_lookup_state(mux->pinctrl,
+						mux->pdata->pinctrl_states[i]);
+			if (IS_ERR(mux->states[i])) {
+				ret = PTR_ERR(mux->states[i]);
+				dev_err(&pdev->dev,
+					"Cannot look up pinctrl state %s: %d\n",
+					mux->pdata->pinctrl_states[i], ret);
+				goto err;
+			}
+	}
+	if (mux->pdata->pinctrl_state_idle) {
+		mux->state_idle = pinctrl_lookup_state(mux->pinctrl,
+						mux->pdata->pinctrl_state_idle);
+		if (IS_ERR(mux->state_idle)) {
+			ret = PTR_ERR(mux->state_idle);
+			dev_err(&pdev->dev,
+				"Cannot look up pinctrl state %s: %d\n",
+				mux->pdata->pinctrl_state_idle, ret);
+			goto err;
+		}
+
+		deselect = i2c_mux_pinctrl_deselect;
+	} else {
+		deselect = NULL;
+	}
+
+	mux->parent = i2c_get_adapter(mux->pdata->parent_bus_num);
+	if (!mux->parent) {
+		dev_err(&pdev->dev, "Parent adapter (%d) not found\n",
+			mux->pdata->parent_bus_num);
+		ret = -ENODEV;
+		goto err;
+	}
+
+	for (i = 0; i < mux->pdata->bus_count; i++) {
+		u32 bus = mux->pdata->base_bus_num ?
+				(mux->pdata->base_bus_num + i) : 0;
+
+		mux->busses[i] = i2c_add_mux_adapter(mux->parent, &pdev->dev,
+						     mux, bus, i,
+						     i2c_mux_pinctrl_select,
+						     deselect);
+		if (!mux->busses[i]) {
+			ret = -ENODEV;
+			dev_err(&pdev->dev, "Failed to add adapter %d\n", i);
+			goto err_del_adapter;
+		}
+	}
+
+	return 0;
+
+err_del_adapter:
+	for (; i > 0; i--)
+		i2c_del_mux_adapter(mux->busses[i - 1]);
+	i2c_put_adapter(mux->parent);
+err:
+	return ret;
+}
+
+static int __devexit i2c_mux_pinctrl_remove(struct platform_device *pdev)
+{
+	struct i2c_mux_pinctrl *mux = platform_get_drvdata(pdev);
+	int i;
+
+	for (i = 0; i < mux->pdata->bus_count; i++)
+		i2c_del_mux_adapter(mux->busses[i]);
+
+	i2c_put_adapter(mux->parent);
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_mux_pinctrl_of_match[] __devinitconst = {
+	{ .compatible = "i2c-mux-pinctrl", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_mux_pinctrl_of_match);
+#endif
+
+static struct platform_driver i2c_mux_pinctrl_driver = {
+	.driver	= {
+		.name	= "i2c-mux-pinctrl",
+		.owner	= THIS_MODULE,
+		.of_match_table = of_match_ptr(i2c_mux_pinctrl_of_match),
+	},
+	.probe	= i2c_mux_pinctrl_probe,
+	.remove	= __devexit_p(i2c_mux_pinctrl_remove),
+};
+module_platform_driver(i2c_mux_pinctrl_driver);
+
+MODULE_DESCRIPTION("pinctrl-based I2C multiplexer driver");
+MODULE_AUTHOR("Stephen Warren <swarren@nvidia.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:i2c-mux-pinctrl");

include/linux/i2c-mux-pinctrl.h

+/*
+ * i2c-mux-pinctrl platform data
+ *
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _LINUX_I2C_MUX_PINCTRL_H
+#define _LINUX_I2C_MUX_PINCTRL_H
+
+/**
+ * struct i2c_mux_pinctrl_platform_data - Platform data for i2c-mux-pinctrl
+ * @parent_bus_num: Parent I2C bus number
+ * @base_bus_num: Base I2C bus number for the child busses. 0 for dynamic.
+ * @bus_count: Number of child busses. Also the number of elements in
+ *	@pinctrl_states
+ * @pinctrl_states: The names of the pinctrl state to select for each child bus
+ * @pinctrl_state_idle: The pinctrl state to select when no child bus is being
+ *	accessed. If NULL, the most recently used pinctrl state will be left
+ *	selected.
+ */
+struct i2c_mux_pinctrl_platform_data {
+	int parent_bus_num;
+	int base_bus_num;
+	int bus_count;
+	const char **pinctrl_states;
+	const char *pinctrl_state_idle;
+};
+
+#endif