Merge tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next

drm/panel: Changes for v4.12-rc1

This contains two new drivers for a Sitronix and a Samsung panel as well
as two new panels supported by the panel-simple driver.

* tag 'drm/panel/for-4.12-rc1' of git://anongit.freedesktop.org/tegra/linux:
  drm/panel: simple: Add support for Winstar WF35LTIACD
  devicetree: add vendor prefix for Winstar Display Corp.
  drm/panel: Add driver for sitronix ST7789V LCD controller
  dt-bindings: display: panel: Add bindings for the Sitronix ST7789V panel
  drm/panel: Add support for S6E3HA2 panel driver on TM2 board
  dt-bindings: Add support for Samsung s6e3ha2 panel binding
  drm/panel: simple: Add support for Ampire AM-480272H3TMQW-T01H
  dt-bindings: Add Ampire AM-480272H3TMQW-T01H panel

Documentation/devicetree/bindings/display/panel/ampire,am-480272h3tmqw-t01h.txt

+Ampire AM-480272H3TMQW-T01H 4.3" WQVGA TFT LCD panel
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Required properties:
+- compatible: should be "ampire,am-480272h3tmqw-t01h"
+
+Optional properties:
+- power-supply: regulator to provide the supply voltage
+- enable-gpios: GPIO pin to enable or disable the panel
+- backlight: phandle of the backlight device attached to the panel
+
+Optional nodes:
+- Video port for RGB input.
+
+Example:
+	panel_rgb: panel-rgb {
+		compatible = "ampire,am-480272h3tmqw-t01h";
+		enable-gpios = <&gpioa 8 1>;
+		port {
+			panel_in_rgb: endpoint {
+				remote-endpoint = <&controller_out_rgb>;
+			};
+		};
+	};

Documentation/devicetree/bindings/display/panel/samsung,s6e3ha2.txt

+Samsung S6E3HA2 5.7" 1440x2560 AMOLED panel
+
+Required properties:
+  - compatible: "samsung,s6e3ha2"
+  - reg: the virtual channel number of a DSI peripheral
+  - vdd3-supply: I/O voltage supply
+  - vci-supply: voltage supply for analog circuits
+  - reset-gpios: a GPIO spec for the reset pin (active low)
+  - enable-gpios: a GPIO spec for the panel enable pin (active high)
+
+Optional properties:
+  - te-gpios: a GPIO spec for the tearing effect synchronization signal
+    gpio pin (active high)
+
+Example:
+&dsi {
+	...
+
+	panel@0 {
+		compatible = "samsung,s6e3ha2";
+		reg = <0>;
+		vdd3-supply = <&ldo27_reg>;
+		vci-supply = <&ldo28_reg>;
+		reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+		enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+		te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+	};
+};

Documentation/devicetree/bindings/display/panel/sitronix,st7789v.txt

+Sitronix ST7789V RGB panel with SPI control bus
+
+Required properties:
+  - compatible: "sitronix,st7789v"
+  - reg: Chip select of the panel on the SPI bus
+  - reset-gpios: a GPIO phandle for the reset pin
+  - power-supply: phandle of the regulator that provides the supply voltage
+
+Optional properties:
+  - backlight: phandle to the backlight used
+
+The generic bindings for the SPI slaves documented in [1] also applies
+
+The device node can contain one 'port' child node with one child
+'endpoint' node, according to the bindings defined in [2]. This
+node should describe panel's video bus.
+
+[1]: Documentation/devicetree/bindings/spi/spi-bus.txt
+[2]: Documentation/devicetree/bindings/graph.txt
+
+Example:
+
+panel@0 {
+	compatible = "sitronix,st7789v";
+	reg = <0>;
+	reset-gpios = <&pio 6 11 GPIO_ACTIVE_LOW>;
+	backlight = <&pwm_bl>;
+	spi-max-frequency = <100000>;
+	spi-cpol;
+	spi-cpha;
+
+	port {
+		panel_input: endpoint {
+			remote-endpoint = <&tcon0_out_panel>;
+		};
+	};
+};

Documentation/devicetree/bindings/display/panel/winstar,wf35ltiacd.txt

+Winstar Display Corporation 3.5" QVGA (320x240) TFT LCD panel
+
+Required properties:
+- compatible: should be "winstar,wf35ltiacd"
+- power-supply: regulator to provide the VCC supply voltage (3.3 volts)
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
+
+Example:
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&hlcdc_pwm 0 50000 PWM_POLARITY_INVERTED>;
+		brightness-levels = <0 31 63 95 127 159 191 223 255>;
+		default-brightness-level = <191>;
+		power-supply = <&bl_reg>;
+	};
+
+	bl_reg: backlight_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "backlight-power-supply";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	panel: panel {
+		compatible = "winstar,wf35ltiacd", "simple-panel";
+		backlight = <&backlight>;
+		power-supply = <&panel_reg>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			panel_input: endpoint {
+				remote-endpoint = <&hlcdc_panel_output>;
+			};
+		};
+	};
+
+	panel_reg: panel_regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "panel-power-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};

Documentation/devicetree/bindings/vendor-prefixes.txt

@@ -336,6 +336,7 @@ wd	Western Digital Corp.
 wetek	WeTek Electronics, limited.
 wexler	Wexler
 winbond Winbond Electronics corp.
+winstar	Winstar Display Corp.
 wlf	Wolfson Microelectronics
 wm	Wondermedia Technologies, Inc.
 x-powers	X-Powers

drivers/gpu/drm/panel/Kconfig

@@ -62,6 +62,12 @@ config DRM_PANEL_PANASONIC_VVX10F034N00
 	  WUXGA (1920x1200) Novatek NT1397-based DSI panel as found in some
 	  Xperia Z2 tablets
 
+config DRM_PANEL_SAMSUNG_S6E3HA2
+	tristate "Samsung S6E3HA2 DSI video mode panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	select VIDEOMODE_HELPERS
+
 config DRM_PANEL_SAMSUNG_S6E8AA0
 	tristate "Samsung S6E8AA0 DSI video mode panel"
 	depends on OF
@@ -91,4 +97,11 @@ config DRM_PANEL_SHARP_LS043T1LE01
 	  Say Y here if you want to enable support for Sharp LS043T1LE01 qHD
 	  (540x960) DSI panel as found on the Qualcomm APQ8074 Dragonboard
 
+config DRM_PANEL_SITRONIX_ST7789V
+	tristate "Sitronix ST7789V panel"
+	depends on OF && SPI
+	help
+	  Say Y here if you want to enable support for the Sitronix
+	  ST7789V controller for 240x320 LCD panels
+
 endmenu

drivers/gpu/drm/panel/Makefile

@@ -4,6 +4,8 @@ obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
 obj-$(CONFIG_DRM_PANEL_PANASONIC_VVX10F034N00) += panel-panasonic-vvx10f034n00.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_LD9040) += panel-samsung-ld9040.o
+obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E3HA2) += panel-samsung-s6e3ha2.o
 obj-$(CONFIG_DRM_PANEL_SAMSUNG_S6E8AA0) += panel-samsung-s6e8aa0.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LQ101R1SX01) += panel-sharp-lq101r1sx01.o
 obj-$(CONFIG_DRM_PANEL_SHARP_LS043T1LE01) += panel-sharp-ls043t1le01.o
+obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o

drivers/gpu/drm/panel/panel-simple.c

@@ -386,6 +386,31 @@ static void panel_simple_shutdown(struct device *dev)
 	panel_simple_disable(&panel->base);
 }
 
+static const struct drm_display_mode ampire_am_480272h3tmqw_t01h_mode = {
+	.clock = 9000,
+	.hdisplay = 480,
+	.hsync_start = 480 + 2,
+	.hsync_end = 480 + 2 + 41,
+	.htotal = 480 + 2 + 41 + 2,
+	.vdisplay = 272,
+	.vsync_start = 272 + 2,
+	.vsync_end = 272 + 2 + 10,
+	.vtotal = 272 + 2 + 10 + 2,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_PVSYNC,
+};
+
+static const struct panel_desc ampire_am_480272h3tmqw_t01h = {
+	.modes = &ampire_am_480272h3tmqw_t01h_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 105,
+		.height = 67,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+};
+
 static const struct drm_display_mode ampire_am800480r3tmqwa1h_mode = {
 	.clock = 33333,
 	.hdisplay = 800,
@@ -1806,8 +1831,36 @@ static const struct panel_desc urt_umsh_8596md_parallel = {
 	.bus_format = MEDIA_BUS_FMT_RGB666_1X18,
 };
 
+static const struct drm_display_mode winstar_wf35ltiacd_mode = {
+	.clock = 6410,
+	.hdisplay = 320,
+	.hsync_start = 320 + 20,
+	.hsync_end = 320 + 20 + 30,
+	.htotal = 320 + 20 + 30 + 38,
+	.vdisplay = 240,
+	.vsync_start = 240 + 4,
+	.vsync_end = 240 + 4 + 3,
+	.vtotal = 240 + 4 + 3 + 15,
+	.vrefresh = 60,
+	.flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc winstar_wf35ltiacd = {
+	.modes = &winstar_wf35ltiacd_mode,
+	.num_modes = 1,
+	.bpc = 8,
+	.size = {
+		.width = 70,
+		.height = 53,
+	},
+	.bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+};
+
 static const struct of_device_id platform_of_match[] = {
 	{
+		.compatible = "ampire,am-480272h3tmqw-t01h",
+		.data = &ampire_am_480272h3tmqw_t01h,
+	}, {
 		.compatible = "ampire,am800480r3tmqwa1h",
 		.data = &ampire_am800480r3tmqwa1h,
 	}, {
@@ -1993,6 +2046,9 @@ static const struct of_device_id platform_of_match[] = {
 	}, {
 		.compatible = "urt,umsh-8596md-20t",
 		.data = &urt_umsh_8596md_parallel,
+	}, {
+		.compatible = "winstar,wf35ltiacd",
+		.data = &winstar_wf35ltiacd,
 	}, {
 		/* sentinel */
 	}

drivers/gpu/drm/panel/panel-sitronix-st7789v.c

+/*
+ * Copyright (C) 2017 Free Electrons
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <linux/spi/spi.h>
+
+#include <drm/drmP.h>
+#include <drm/drm_panel.h>
+
+#include <video/mipi_display.h>
+
+#define ST7789V_COLMOD_RGB_FMT_18BITS		(6 << 4)
+#define ST7789V_COLMOD_CTRL_FMT_18BITS		(6 << 0)
+
+#define ST7789V_RAMCTRL_CMD		0xb0
+#define ST7789V_RAMCTRL_RM_RGB			BIT(4)
+#define ST7789V_RAMCTRL_DM_RGB			BIT(0)
+#define ST7789V_RAMCTRL_MAGIC			(3 << 6)
+#define ST7789V_RAMCTRL_EPF(n)			(((n) & 3) << 4)
+
+#define ST7789V_RGBCTRL_CMD		0xb1
+#define ST7789V_RGBCTRL_WO			BIT(7)
+#define ST7789V_RGBCTRL_RCM(n)			(((n) & 3) << 5)
+#define ST7789V_RGBCTRL_VSYNC_HIGH		BIT(3)
+#define ST7789V_RGBCTRL_HSYNC_HIGH		BIT(2)
+#define ST7789V_RGBCTRL_PCLK_HIGH		BIT(1)
+#define ST7789V_RGBCTRL_VBP(n)			((n) & 0x7f)
+#define ST7789V_RGBCTRL_HBP(n)			((n) & 0x1f)
+
+#define ST7789V_PORCTRL_CMD		0xb2
+#define ST7789V_PORCTRL_IDLE_BP(n)		(((n) & 0xf) << 4)
+#define ST7789V_PORCTRL_IDLE_FP(n)		((n) & 0xf)
+#define ST7789V_PORCTRL_PARTIAL_BP(n)		(((n) & 0xf) << 4)
+#define ST7789V_PORCTRL_PARTIAL_FP(n)		((n) & 0xf)
+
+#define ST7789V_GCTRL_CMD		0xb7
+#define ST7789V_GCTRL_VGHS(n)			(((n) & 7) << 4)
+#define ST7789V_GCTRL_VGLS(n)			((n) & 7)
+
+#define ST7789V_VCOMS_CMD		0xbb
+
+#define ST7789V_LCMCTRL_CMD		0xc0
+#define ST7789V_LCMCTRL_XBGR			BIT(5)
+#define ST7789V_LCMCTRL_XMX			BIT(3)
+#define ST7789V_LCMCTRL_XMH			BIT(2)
+
+#define ST7789V_VDVVRHEN_CMD		0xc2
+#define ST7789V_VDVVRHEN_CMDEN			BIT(0)
+
+#define ST7789V_VRHS_CMD		0xc3
+
+#define ST7789V_VDVS_CMD		0xc4
+
+#define ST7789V_FRCTRL2_CMD		0xc6
+
+#define ST7789V_PWCTRL1_CMD		0xd0
+#define ST7789V_PWCTRL1_MAGIC			0xa4
+#define ST7789V_PWCTRL1_AVDD(n)			(((n) & 3) << 6)
+#define ST7789V_PWCTRL1_AVCL(n)			(((n) & 3) << 4)
+#define ST7789V_PWCTRL1_VDS(n)			((n) & 3)
+
+#define ST7789V_PVGAMCTRL_CMD		0xe0
+#define ST7789V_PVGAMCTRL_JP0(n)		(((n) & 3) << 4)
+#define ST7789V_PVGAMCTRL_JP1(n)		(((n) & 3) << 4)
+#define ST7789V_PVGAMCTRL_VP0(n)		((n) & 0xf)
+#define ST7789V_PVGAMCTRL_VP1(n)		((n) & 0x3f)
+#define ST7789V_PVGAMCTRL_VP2(n)		((n) & 0x3f)
+#define ST7789V_PVGAMCTRL_VP4(n)		((n) & 0x1f)
+#define ST7789V_PVGAMCTRL_VP6(n)		((n) & 0x1f)
+#define ST7789V_PVGAMCTRL_VP13(n)		((n) & 0xf)
+#define ST7789V_PVGAMCTRL_VP20(n)		((n) & 0x7f)
+#define ST7789V_PVGAMCTRL_VP27(n)		((n) & 7)
+#define ST7789V_PVGAMCTRL_VP36(n)		(((n) & 7) << 4)
+#define ST7789V_PVGAMCTRL_VP43(n)		((n) & 0x7f)
+#define ST7789V_PVGAMCTRL_VP50(n)		((n) & 0xf)
+#define ST7789V_PVGAMCTRL_VP57(n)		((n) & 0x1f)
+#define ST7789V_PVGAMCTRL_VP59(n)		((n) & 0x1f)
+#define ST7789V_PVGAMCTRL_VP61(n)		((n) & 0x3f)
+#define ST7789V_PVGAMCTRL_VP62(n)		((n) & 0x3f)
+#define ST7789V_PVGAMCTRL_VP63(n)		(((n) & 0xf) << 4)
+
+#define ST7789V_NVGAMCTRL_CMD		0xe1
+#define ST7789V_NVGAMCTRL_JN0(n)		(((n) & 3) << 4)
+#define ST7789V_NVGAMCTRL_JN1(n)		(((n) & 3) << 4)
+#define ST7789V_NVGAMCTRL_VN0(n)		((n) & 0xf)
+#define ST7789V_NVGAMCTRL_VN1(n)		((n) & 0x3f)
+#define ST7789V_NVGAMCTRL_VN2(n)		((n) & 0x3f)
+#define ST7789V_NVGAMCTRL_VN4(n)		((n) & 0x1f)
+#define ST7789V_NVGAMCTRL_VN6(n)		((n) & 0x1f)
+#define ST7789V_NVGAMCTRL_VN13(n)		((n) & 0xf)
+#define ST7789V_NVGAMCTRL_VN20(n)		((n) & 0x7f)
+#define ST7789V_NVGAMCTRL_VN27(n)		((n) & 7)
+#define ST7789V_NVGAMCTRL_VN36(n)		(((n) & 7) << 4)
+#define ST7789V_NVGAMCTRL_VN43(n)		((n) & 0x7f)
+#define ST7789V_NVGAMCTRL_VN50(n)		((n) & 0xf)
+#define ST7789V_NVGAMCTRL_VN57(n)		((n) & 0x1f)
+#define ST7789V_NVGAMCTRL_VN59(n)		((n) & 0x1f)
+#define ST7789V_NVGAMCTRL_VN61(n)		((n) & 0x3f)
+#define ST7789V_NVGAMCTRL_VN62(n)		((n) & 0x3f)
+#define ST7789V_NVGAMCTRL_VN63(n)		(((n) & 0xf) << 4)
+
+#define ST7789V_TEST(val, func)			\
+	do {					\
+		if ((val = (func)))		\
+			return val;		\
+	} while (0)
+
+struct st7789v {
+	struct drm_panel panel;
+	struct spi_device *spi;
+	struct gpio_desc *reset;
+	struct backlight_device *backlight;
+	struct regulator *power;
+};
+
+enum st7789v_prefix {
+	ST7789V_COMMAND = 0,
+	ST7789V_DATA = 1,
+};
+
+static inline struct st7789v *panel_to_st7789v(struct drm_panel *panel)
+{
+	return container_of(panel, struct st7789v, panel);
+}
+
+static int st7789v_spi_write(struct st7789v *ctx, enum st7789v_prefix prefix,
+			     u8 data)
+{
+	struct spi_transfer xfer = { };
+	struct spi_message msg;
+	u16 txbuf = ((prefix & 1) << 8) | data;
+
+	spi_message_init(&msg);
+
+	xfer.tx_buf = &txbuf;
+	xfer.bits_per_word = 9;
+	xfer.len = sizeof(txbuf);
+
+	spi_message_add_tail(&xfer, &msg);
+	return spi_sync(ctx->spi, &msg);
+}
+
+static int st7789v_write_command(struct st7789v *ctx, u8 cmd)
+{
+	return st7789v_spi_write(ctx, ST7789V_COMMAND, cmd);
+}
+
+static int st7789v_write_data(struct st7789v *ctx, u8 cmd)
+{
+	return st7789v_spi_write(ctx, ST7789V_DATA, cmd);
+}
+
+static const struct drm_display_mode default_mode = {
+	.clock = 7000,
+	.hdisplay = 240,
+	.hsync_start = 240 + 38,
+	.hsync_end = 240 + 38 + 10,
+	.htotal = 240 + 38 + 10 + 10,
+	.vdisplay = 320,
+	.vsync_start = 320 + 8,
+	.vsync_end = 320 + 8 + 4,
+	.vtotal = 320 + 8 + 4 + 4,
+	.vrefresh = 60,
+};
+
+static int st7789v_get_modes(struct drm_panel *panel)
+{
+	struct drm_connector *connector = panel->connector;
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(panel->drm, &default_mode);
+	if (!mode) {
+		dev_err(panel->drm->dev, "failed to add mode %ux%ux@%u\n",
+			default_mode.hdisplay, default_mode.vdisplay,
+			default_mode.vrefresh);
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	drm_mode_probed_add(connector, mode);
+
+	panel->connector->display_info.width_mm = 61;
+	panel->connector->display_info.height_mm = 103;
+
+	return 1;
+}
+
+static int st7789v_prepare(struct drm_panel *panel)
+{
+	struct st7789v *ctx = panel_to_st7789v(panel);
+	int ret;
+
+	ret = regulator_enable(ctx->power);
+	if (ret)
+		return ret;
+
+	gpiod_set_value(ctx->reset, 1);
+	msleep(30);
+	gpiod_set_value(ctx->reset, 0);
+	msleep(120);
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, MIPI_DCS_EXIT_SLEEP_MODE));
+
+	/* We need to wait 120ms after a sleep out command */
+	msleep(120);
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx,
+						MIPI_DCS_SET_ADDRESS_MODE));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, 0));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx,
+						MIPI_DCS_SET_PIXEL_FORMAT));
+	ST7789V_TEST(ret, st7789v_write_data(ctx,
+					     (MIPI_DCS_PIXEL_FMT_18BIT << 4) |
+					     (MIPI_DCS_PIXEL_FMT_18BIT)));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_PORCTRL_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, 0xc));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, 0xc));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, 0));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PORCTRL_IDLE_BP(3) |
+					     ST7789V_PORCTRL_IDLE_FP(3)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx,
+					     ST7789V_PORCTRL_PARTIAL_BP(3) |
+					     ST7789V_PORCTRL_PARTIAL_FP(3)));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_GCTRL_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_GCTRL_VGLS(5) |
+					     ST7789V_GCTRL_VGHS(3)));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_VCOMS_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, 0x2b));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_LCMCTRL_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_LCMCTRL_XMH |
+					     ST7789V_LCMCTRL_XMX |
+					     ST7789V_LCMCTRL_XBGR));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_VDVVRHEN_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_VDVVRHEN_CMDEN));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_VRHS_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, 0xf));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_VDVS_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, 0x20));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_FRCTRL2_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, 0xf));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_PWCTRL1_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PWCTRL1_MAGIC));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PWCTRL1_AVDD(2) |
+					     ST7789V_PWCTRL1_AVCL(2) |
+					     ST7789V_PWCTRL1_VDS(1)));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_PVGAMCTRL_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP63(0xd)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP1(0xca)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP2(0xe)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP4(8)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP6(9)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP13(7)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP20(0x2d)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP27(0xb) |
+					     ST7789V_PVGAMCTRL_VP36(3)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP43(0x3d)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_JP1(3) |
+					     ST7789V_PVGAMCTRL_VP50(4)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP57(0xa)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP59(0xa)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP61(0x1b)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_PVGAMCTRL_VP62(0x28)));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_NVGAMCTRL_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN63(0xd)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN1(0xca)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN2(0xf)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN4(8)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN6(8)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN13(7)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN20(0x2e)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN27(0xc) |
+					     ST7789V_NVGAMCTRL_VN36(5)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN43(0x40)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_JN1(3) |
+					     ST7789V_NVGAMCTRL_VN50(4)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN57(9)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN59(0xb)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN61(0x1b)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_NVGAMCTRL_VN62(0x28)));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, MIPI_DCS_ENTER_INVERT_MODE));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_RAMCTRL_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_RAMCTRL_DM_RGB |
+					     ST7789V_RAMCTRL_RM_RGB));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_RAMCTRL_EPF(3) |
+					     ST7789V_RAMCTRL_MAGIC));
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, ST7789V_RGBCTRL_CMD));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_RGBCTRL_WO |
+					     ST7789V_RGBCTRL_RCM(2) |
+					     ST7789V_RGBCTRL_VSYNC_HIGH |
+					     ST7789V_RGBCTRL_HSYNC_HIGH |
+					     ST7789V_RGBCTRL_PCLK_HIGH));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_RGBCTRL_VBP(8)));
+	ST7789V_TEST(ret, st7789v_write_data(ctx, ST7789V_RGBCTRL_HBP(20)));
+
+	return 0;
+}
+
+static int st7789v_enable(struct drm_panel *panel)
+{
+	struct st7789v *ctx = panel_to_st7789v(panel);
+
+	if (ctx->backlight) {
+		ctx->backlight->props.state &= ~BL_CORE_FBBLANK;
+		ctx->backlight->props.power = FB_BLANK_UNBLANK;
+		backlight_update_status(ctx->backlight);
+	}
+
+	return st7789v_write_command(ctx, MIPI_DCS_SET_DISPLAY_ON);
+}
+
+static int st7789v_disable(struct drm_panel *panel)
+{
+	struct st7789v *ctx = panel_to_st7789v(panel);
+	int ret;
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, MIPI_DCS_SET_DISPLAY_OFF));
+
+	if (ctx->backlight) {
+		ctx->backlight->props.power = FB_BLANK_POWERDOWN;
+		ctx->backlight->props.state |= BL_CORE_FBBLANK;
+		backlight_update_status(ctx->backlight);
+	}
+
+	return 0;
+}
+
+static int st7789v_unprepare(struct drm_panel *panel)
+{
+	struct st7789v *ctx = panel_to_st7789v(panel);
+	int ret;
+
+	ST7789V_TEST(ret, st7789v_write_command(ctx, MIPI_DCS_ENTER_SLEEP_MODE));
+
+	regulator_disable(ctx->power);
+
+	return 0;
+}
+
+static const struct drm_panel_funcs st7789v_drm_funcs = {
+	.disable	= st7789v_disable,
+	.enable		= st7789v_enable,
+	.get_modes	= st7789v_get_modes,
+	.prepare	= st7789v_prepare,
+	.unprepare	= st7789v_unprepare,
+};
+
+static int st7789v_probe(struct spi_device *spi)
+{
+	struct device_node *backlight;
+	struct st7789v *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(&spi->dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	spi_set_drvdata(spi, ctx);
+	ctx->spi = spi;
+
+	ctx->panel.dev = &spi->dev;
+	ctx->panel.funcs = &st7789v_drm_funcs;
+
+	ctx->power = devm_regulator_get(&spi->dev, "power");
+	if (IS_ERR(ctx->power))
+		return PTR_ERR(ctx->power);
+
+	ctx->reset = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ctx->reset)) {
+		dev_err(&spi->dev, "Couldn't get our reset line\n");
+		return PTR_ERR(ctx->reset);
+	}
+
+	backlight = of_parse_phandle(spi->dev.of_node, "backlight", 0);
+	if (backlight) {
+		ctx->backlight = of_find_backlight_by_node(backlight);
+		of_node_put(backlight);
+
+		if (!ctx->backlight)
+			return -EPROBE_DEFER;
+	}
+
+	ret = drm_panel_add(&ctx->panel);
+	if (ret < 0)
+		goto err_free_backlight;
+
+	return 0;
+
+err_free_backlight:
+	if (ctx->backlight)
+		put_device(&ctx->backlight->dev);
+
+	return ret;
+}
+
+static int st7789v_remove(struct spi_device *spi)
+{
+	struct st7789v *ctx = spi_get_drvdata(spi);
+
+	drm_panel_detach(&ctx->panel);
+	drm_panel_remove(&ctx->panel);
+
+	if (ctx->backlight)
+		put_device(&ctx->backlight->dev);
+
+	return 0;
+}
+
+static const struct of_device_id st7789v_of_match[] = {
+	{ .compatible = "sitronix,st7789v" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, st7789v_of_match);
+
+static struct spi_driver st7789v_driver = {
+	.probe = st7789v_probe,
+	.remove = st7789v_remove,
+	.driver = {
+		.name = "st7789v",
+		.of_match_table = st7789v_of_match,
+	},
+};
+module_spi_driver(st7789v_driver);
+
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com>");
+MODULE_DESCRIPTION("Sitronix st7789v LCD Driver");
+MODULE_LICENSE("GPL v2");