ARM: dts: sun4i: Add reg_vcc3v3 to sun4i board mmc nodes

Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaxime Ripard <maxime.ripard@free-electrons.com>

arch/arm/boot/dts/sun4i-a10-a1000.dts

@@ -39,6 +39,7 @@
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
 			cd-gpios = <&pio 7 1 0>; /* PH1 */
 			cd-inverted;

arch/arm/boot/dts/sun4i-a10-cubieboard.dts

@@ -37,6 +37,7 @@
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
 			cd-gpios = <&pio 7 1 0>; /* PH1 */
 			cd-inverted;

arch/arm/boot/dts/sun4i-a10-hackberry.dts

@@ -39,6 +39,7 @@
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
 			cd-gpios = <&pio 7 1 0>; /* PH1 */
 			cd-inverted;

arch/arm/boot/dts/sun4i-a10-inet97fv2.dts

@@ -27,6 +27,7 @@
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
 			cd-gpios = <&pio 7 1 0>; /* PH1 */
 			cd-inverted;

arch/arm/boot/dts/sun4i-a10-mini-xplus.dts

@@ -23,6 +23,7 @@
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
 			cd-gpios = <&pio 7 1 0>; /* PH1 */
 			cd-inverted;

arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts

@@ -36,6 +36,7 @@
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
 			cd-gpios = <&pio 7 1 0>; /* PH1 */
 			cd-inverted;

arch/arm/boot/dts/sun4i-a10-pcduino.dts

@@ -37,6 +37,7 @@
 		mmc0: mmc@01c0f000 {
 			pinctrl-names = "default";
 			pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+			vmmc-supply = <&reg_vcc3v3>;
 			bus-width = <4>;
 			cd-gpios = <&pio 7 1 0>; /* PH1 */
 			cd-inverted;