rt2x00: Fix rfkill polling prior to interface start.

We need to program the rfkill switch GPIO pin direction to input at
device initialization time, not only when the interface is brought up.
Doing this only when the interface is brought up could lead to rfkill
detecting the switch is turned on erroneously and inability to create
the interface and bringing it up.
Reported-and-tested-by: NAndreas Messer <andi@bastelmap.de>
Signed-off-by: NGertjan van Wingerde <gwingerde@gmail.com>
Cc: <stable@vger.kernel.org>
Acked-by: NIvo Van Doorn <ivdoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

drivers/net/wireless/rt2x00/rt2400pci.c

@@ -1611,6 +1611,7 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -1623,6 +1624,14 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (retval)
 		return retval;
 
+	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
+	rt2x00_set_field32(&reg, GPIOCSR_BIT8, 1);
+	rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
 	/*
 	 * Initialize hw specifications.
 	 */

drivers/net/wireless/rt2x00/rt2400pci.h

@@ -670,6 +670,7 @@
 #define GPIOCSR_BIT5			FIELD32(0x00000020)
 #define GPIOCSR_BIT6			FIELD32(0x00000040)
 #define GPIOCSR_BIT7			FIELD32(0x00000080)
+#define GPIOCSR_BIT8			FIELD32(0x00000100)
 
 /*
  * BBPPCSR: BBP Pin control register.

drivers/net/wireless/rt2x00/rt2500pci.c

@@ -1929,6 +1929,7 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -1941,6 +1942,14 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (retval)
 		return retval;
 
+	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, GPIOCSR, &reg);
+	rt2x00_set_field32(&reg, GPIOCSR_DIR0, 1);
+	rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg);
+
 	/*
 	 * Initialize hw specifications.
 	 */

drivers/net/wireless/rt2x00/rt2500usb.c

@@ -1768,6 +1768,7 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u16 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -1780,6 +1781,14 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (retval)
 		return retval;
 
+	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2500usb_register_read(rt2x00dev, MAC_CSR19, &reg);
+	rt2x00_set_field16(&reg, MAC_CSR19_BIT8, 0);
+	rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg);
+
 	/*
 	 * Initialize hw specifications.
 	 */

drivers/net/wireless/rt2x00/rt2500usb.h

@@ -197,6 +197,7 @@
 #define MAC_CSR19_BIT5			FIELD16(0x0020)
 #define MAC_CSR19_BIT6			FIELD16(0x0040)
 #define MAC_CSR19_BIT7			FIELD16(0x0080)
+#define MAC_CSR19_BIT8			FIELD16(0x0100)
 
 /*
  * MAC_CSR20: LED control register.

drivers/net/wireless/rt2x00/rt2800pci.c

@@ -983,6 +983,7 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -995,6 +996,14 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (retval)
 		return retval;
 
+	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+	rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
 	/*
 	 * Initialize hw specifications.
 	 */

drivers/net/wireless/rt2x00/rt2800usb.c

@@ -736,6 +736,7 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev)
 static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -748,6 +749,14 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (retval)
 		return retval;
 
+	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, &reg);
+	rt2x00_set_field32(&reg, GPIO_CTRL_CFG_GPIOD_BIT2, 1);
+	rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg);
+
 	/*
 	 * Initialize hw specifications.
 	 */

drivers/net/wireless/rt2x00/rt61pci.c

@@ -2832,6 +2832,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Disable power saving.
@@ -2849,6 +2850,14 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (retval)
 		return retval;
 
+	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00pci_register_read(rt2x00dev, MAC_CSR13, &reg);
+	rt2x00_set_field32(&reg, MAC_CSR13_BIT13, 1);
+	rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg);
+
 	/*
 	 * Initialize hw specifications.
 	 */

drivers/net/wireless/rt2x00/rt61pci.h

@@ -372,6 +372,7 @@ struct hw_pairwise_ta_entry {
 #define MAC_CSR13_BIT10			FIELD32(0x00000400)
 #define MAC_CSR13_BIT11			FIELD32(0x00000800)
 #define MAC_CSR13_BIT12			FIELD32(0x00001000)
+#define MAC_CSR13_BIT13			FIELD32(0x00002000)
 
 /*
  * MAC_CSR14: LED control register.

drivers/net/wireless/rt2x00/rt73usb.c

@@ -2177,6 +2177,7 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev)
 static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 {
 	int retval;
+	u32 reg;
 
 	/*
 	 * Allocate eeprom data.
@@ -2189,6 +2190,14 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev)
 	if (retval)
 		return retval;
 
+	/*
+	 * Enable rfkill polling by setting GPIO direction of the
+	 * rfkill switch GPIO pin correctly.
+	 */
+	rt2x00usb_register_read(rt2x00dev, MAC_CSR13, &reg);
+	rt2x00_set_field32(&reg, MAC_CSR13_BIT15, 0);
+	rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg);
+
 	/*
 	 * Initialize hw specifications.
 	 */

drivers/net/wireless/rt2x00/rt73usb.h

@@ -282,6 +282,9 @@ struct hw_pairwise_ta_entry {
 #define MAC_CSR13_BIT10			FIELD32(0x00000400)
 #define MAC_CSR13_BIT11			FIELD32(0x00000800)
 #define MAC_CSR13_BIT12			FIELD32(0x00001000)
+#define MAC_CSR13_BIT13			FIELD32(0x00002000)
+#define MAC_CSR13_BIT14			FIELD32(0x00004000)
+#define MAC_CSR13_BIT15			FIELD32(0x00008000)
 
 /*
  * MAC_CSR14: LED control register.