提交 a20d2394 编写于 作者: J Jonas Aberg 提交者: Ben Dooks

i2c-nomadik: add regulator support

This on-chip I2C controller needs to fetch the regulator
representing its voltage domain so that it won't be switched off.
Signed-off-by: NJonas Aberg <jonas.aberg@stericsson.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBen Dooks <ben-linux@fluff.org>
上级 d762f438
......@@ -22,6 +22,7 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/regulator/consumer.h>
#include <plat/i2c.h>
......@@ -151,6 +152,7 @@ struct i2c_nmk_client {
* @stop: stop condition
* @xfer_complete: acknowledge completion for a I2C message
* @result: controller propogated result
* @busy: Busy doing transfer
*/
struct nmk_i2c_dev {
struct platform_device *pdev;
......@@ -163,6 +165,8 @@ struct nmk_i2c_dev {
int stop;
struct completion xfer_complete;
int result;
struct regulator *regulator;
bool busy;
};
/* controller's abort causes */
......@@ -257,7 +261,7 @@ static int init_hw(struct nmk_i2c_dev *dev)
stat = flush_i2c_fifo(dev);
if (stat)
return stat;
goto exit;
/* disable the controller */
i2c_clr_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
......@@ -268,10 +272,16 @@ static int init_hw(struct nmk_i2c_dev *dev)
dev->cli.operation = I2C_NO_OPERATION;
exit:
/* TODO: Why disable clocks after init hw? */
clk_disable(dev->clk);
/*
* TODO: What is this delay for?
* Must be pretty pointless since the hw block
* is frozen. Or?
*/
udelay(I2C_DELAY);
return 0;
return stat;
}
/* enable peripheral, master mode operation */
......@@ -562,9 +572,14 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
u32 cause;
struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
dev->busy = true;
if (dev->regulator)
regulator_enable(dev->regulator);
status = init_hw(dev);
if (status)
return status;
goto out2;
clk_enable(dev->clk);
......@@ -575,7 +590,9 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
if (unlikely(msgs[i].flags & I2C_M_TEN)) {
dev_err(&dev->pdev->dev, "10 bit addressing"
"not supported\n");
return -EINVAL;
status = -EINVAL;
goto out;
}
dev->cli.slave_adr = msgs[i].addr;
dev->cli.buffer = msgs[i].buf;
......@@ -600,12 +617,19 @@ static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
dev_err(&dev->pdev->dev, "%s\n",
cause >= ARRAY_SIZE(abort_causes)
? "unknown reason" : abort_causes[cause]);
clk_disable(dev->clk);
return status;
goto out;
}
udelay(I2C_DELAY);
}
out:
clk_disable(dev->clk);
out2:
if (dev->regulator)
regulator_disable(dev->regulator);
dev->busy = false;
/* return the no. messages processed */
if (status)
......@@ -805,6 +829,21 @@ static irqreturn_t i2c_irq_handler(int irq, void *arg)
return IRQ_HANDLED;
}
#ifdef CONFIG_PM
static int nmk_i2c_suspend(struct platform_device *pdev, pm_message_t mesg)
{
struct nmk_i2c_dev *dev = platform_get_drvdata(pdev);
if (dev->busy)
return -EBUSY;
else
return 0;
}
#else
#define nmk_i2c_suspend NULL
#endif
static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
......@@ -830,7 +869,7 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
ret = -ENOMEM;
goto err_no_mem;
}
dev->busy = false;
dev->pdev = pdev;
platform_set_drvdata(pdev, dev);
......@@ -860,6 +899,12 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
goto err_irq;
}
dev->regulator = regulator_get(&pdev->dev, "v-i2c");
if (IS_ERR(dev->regulator)) {
dev_warn(&pdev->dev, "could not get i2c regulator\n");
dev->regulator = NULL;
}
dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
dev_err(&pdev->dev, "could not get i2c clock\n");
......@@ -887,12 +932,6 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
i2c_set_adapdata(adap, dev);
ret = init_hw(dev);
if (ret != 0) {
dev_err(&pdev->dev, "error in initializing i2c hardware\n");
goto err_init_hw;
}
dev_info(&pdev->dev, "initialize %s on virtual "
"base %p\n", adap->name, dev->virtbase);
......@@ -904,10 +943,11 @@ static int __devinit nmk_i2c_probe(struct platform_device *pdev)
return 0;
err_init_hw:
err_add_adap:
clk_put(dev->clk);
err_no_clk:
if (dev->regulator)
regulator_put(dev->regulator);
free_irq(dev->irq, dev);
err_irq:
iounmap(dev->virtbase);
......@@ -938,6 +978,8 @@ static int __devexit nmk_i2c_remove(struct platform_device *pdev)
if (res)
release_mem_region(res->start, resource_size(res));
clk_put(dev->clk);
if (dev->regulator)
regulator_put(dev->regulator);
platform_set_drvdata(pdev, NULL);
kfree(dev);
......@@ -951,6 +993,7 @@ static struct platform_driver nmk_i2c_driver = {
},
.probe = nmk_i2c_probe,
.remove = __devexit_p(nmk_i2c_remove),
.suspend = nmk_i2c_suspend,
};
static int __init nmk_i2c_init(void)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册