powerpc/virtex: fix various format/casting printk mismatches

Various printk format string in code used by the Xilinx Virtex platform
are not 32-bit/64-bit safe.  Add correct casting to fix the bugs.
Reported-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Acked-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>

arch/powerpc/sysdev/xilinx_intc.c

@@ -107,8 +107,8 @@ xilinx_intc_init(struct device_node *np)
 	}
 	regs = ioremap(res.start, 32);
 
-	printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
-		res.start, regs);
+	printk(KERN_INFO "Xilinx intc at 0x%08llx mapped to 0x%p\n",
+		(unsigned long long) res.start, regs);
 
 	/* Setup interrupt controller */
 	out_be32(regs + XINTC_IER, 0); /* disable all irqs */

drivers/block/xsysace.c

@@ -628,8 +628,8 @@ static void ace_fsm_dostate(struct ace_device *ace)
 
 		/* Okay, it's a data request, set it up for transfer */
 		dev_dbg(ace->dev,
-			"request: sec=%lx hcnt=%lx, ccnt=%x, dir=%i\n",
-			req->sector, req->hard_nr_sectors,
+			"request: sec=%llx hcnt=%lx, ccnt=%x, dir=%i\n",
+			(unsigned long long) req->sector, req->hard_nr_sectors,
 			req->current_nr_sectors, rq_data_dir(req));
 
 		ace->req = req;

drivers/char/xilinx_hwicap/xilinx_hwicap.c

@@ -626,7 +626,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 	if (!request_mem_region(drvdata->mem_start,
 					drvdata->mem_size, DRIVER_NAME)) {
 		dev_err(dev, "Couldn't lock memory region at %Lx\n",
-			regs_res->start);
+			(unsigned long long) regs_res->start);
 		retval = -EBUSY;
 		goto failed1;
 	}
@@ -645,9 +645,10 @@ static int __devinit hwicap_setup(struct device *dev, int id,
 	mutex_init(&drvdata->sem);
 	drvdata->is_open = 0;
 
-	dev_info(dev, "ioremap %lx to %p with size %Lx\n",
-		 (unsigned long int)drvdata->mem_start,
-			drvdata->base_address, drvdata->mem_size);
+	dev_info(dev, "ioremap %llx to %p with size %llx\n",
+		 (unsigned long long) drvdata->mem_start,
+		 drvdata->base_address,
+		 (unsigned long long) drvdata->mem_size);
 
 	cdev_init(&drvdata->cdev, &hwicap_fops);
 	drvdata->cdev.owner = THIS_MODULE;

drivers/serial/uartlite.c

@@ -286,8 +286,8 @@ static void ulite_release_port(struct uart_port *port)
 
 static int ulite_request_port(struct uart_port *port)
 {
-	pr_debug("ulite console: port=%p; port->mapbase=%x\n",
-		 port, port->mapbase);
+	pr_debug("ulite console: port=%p; port->mapbase=%llx\n",
+		 port, (unsigned long long) port->mapbase);
 
 	if (!request_mem_region(port->mapbase, ULITE_REGION, "uartlite")) {
 		dev_err(port->dev, "Memory region busy\n");

drivers/video/xilinxfb.c

@@ -298,8 +298,9 @@ static int xilinxfb_assign(struct device *dev, unsigned long physaddr,
 
 	/* Put a banner in the log (for DEBUG) */
 	dev_dbg(dev, "regs: phys=%lx, virt=%p\n", physaddr, drvdata->regs);
-	dev_dbg(dev, "fb: phys=%p, virt=%p, size=%x\n",
-		(void*)drvdata->fb_phys, drvdata->fb_virt, fbsize);
+	dev_dbg(dev, "fb: phys=%llx, virt=%p, size=%x\n",
+		(unsigned long long) drvdata->fb_phys, drvdata->fb_virt,
+		fbsize);
 
 	return 0;	/* success */