Merge branch 'linus' into x86/urgent

Merge reason: pull in latest, to be able to revert a patch there.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Documentation/debugging-via-ohci1394.txt

@@ -64,14 +64,14 @@ be used to view the printk buffer of a remote machine, even with live update.
 
 Bernhard Kaindl enhanced firescope to support accessing 64-bit machines
 from 32-bit firescope and vice versa:
-- ftp://ftp.suse.de/private/bk/firewire/tools/firescope-0.2.2.tar.bz2
+- http://halobates.de/firewire/firescope-0.2.2.tar.bz2
 
 and he implemented fast system dump (alpha version - read README.txt):
-- ftp://ftp.suse.de/private/bk/firewire/tools/firedump-0.1.tar.bz2
+- http://halobates.de/firewire/firedump-0.1.tar.bz2
 
 There is also a gdb proxy for firewire which allows to use gdb to access
 data which can be referenced from symbols found by gdb in vmlinux:
-- ftp://ftp.suse.de/private/bk/firewire/tools/fireproxy-0.33.tar.bz2
+- http://halobates.de/firewire/fireproxy-0.33.tar.bz2
 
 The latest version of this gdb proxy (fireproxy-0.34) can communicate (not
 yet stable) with kgdb over an memory-based communication module (kgdbom).
@@ -178,7 +178,7 @@ Step-by-step instructions for using firescope with early OHCI initialization:
 
 Notes
 -----
-Documentation and specifications: ftp://ftp.suse.de/private/bk/firewire/docs
+Documentation and specifications: http://halobates.de/firewire/
 
 FireWire is a trademark of Apple Inc. - for more information please refer to:
 http://en.wikipedia.org/wiki/FireWire

Documentation/filesystems/ext3.txt

@@ -123,10 +123,18 @@ resuid=n		The user ID which may use the reserved blocks.
 
 sb=n			Use alternate superblock at this location.
 
-quota
-noquota
-grpquota
-usrquota
+quota			These options are ignored by the filesystem. They
+noquota			are used only by quota tools to recognize volumes
+grpquota		where quota should be turned on. See documentation
+usrquota		in the quota-tools package for more details
+			(http://sourceforge.net/projects/linuxquota).
+
+jqfmt=<quota type>	These options tell filesystem details about quota
+usrjquota=<file>	so that quota information can be properly updated
+grpjquota=<file>	during journal replay. They replace the above
+			quota options. See documentation in the quota-tools
+			package for more details
+			(http://sourceforge.net/projects/linuxquota).
 
 bh		(*)	ext3 associates buffer heads to data pages to
 nobh			(a) cache disk block mapping information

Documentation/infiniband/user_mad.txt

@@ -128,8 +128,8 @@ Setting IsSM Capability Bit
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="umad*", NAME="infiniband/%k"
-    KERNEL="issm*", NAME="infiniband/%k"
+    KERNEL=="umad*", NAME="infiniband/%k"
+    KERNEL=="issm*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 

Documentation/infiniband/user_verbs.txt

@@ -58,7 +58,7 @@ Memory pinning
   To create the appropriate character device files automatically with
   udev, a rule like
 
-    KERNEL="uverbs*", NAME="infiniband/%k"
+    KERNEL=="uverbs*", NAME="infiniband/%k"
 
   can be used.  This will create device nodes named
 

Documentation/scsi/hptiop.txt

@@ -3,6 +3,25 @@ HIGHPOINT ROCKETRAID 3xxx/4xxx ADAPTER DRIVER (hptiop)
 Controller Register Map
 -------------------------
 
+For RR44xx Intel IOP based adapters, the controller IOP is accessed via PCI BAR0 and BAR2:
+
+     BAR0 offset    Register
+            0x11C5C Link Interface IRQ Set
+            0x11C60 Link Interface IRQ Clear
+
+     BAR2 offset    Register
+            0x10    Inbound Message Register 0
+            0x14    Inbound Message Register 1
+            0x18    Outbound Message Register 0
+            0x1C    Outbound Message Register 1
+            0x20    Inbound Doorbell Register
+            0x24    Inbound Interrupt Status Register
+            0x28    Inbound Interrupt Mask Register
+            0x30    Outbound Interrupt Status Register
+            0x34    Outbound Interrupt Mask Register
+            0x40    Inbound Queue Port
+            0x44    Outbound Queue Port
+
 For Intel IOP based adapters, the controller IOP is accessed via PCI BAR0:
 
      BAR0 offset    Register
@@ -93,7 +112,7 @@ The driver exposes following sysfs attributes:
 
 
 -----------------------------------------------------------------------------
-Copyright (C) 2006-2007 HighPoint Technologies, Inc. All Rights Reserved.
+Copyright (C) 2006-2009 HighPoint Technologies, Inc. All Rights Reserved.
 
   This file is distributed in the hope that it will be useful,
   but WITHOUT ANY WARRANTY; without even the implied warranty of

Documentation/sound/alsa/HD-Audio-Models.txt

@@ -359,6 +359,7 @@ STAC9227/9228/9229/927x
   5stack-no-fp	D965 5stack without front panel
   dell-3stack	Dell Dimension E520
   dell-bios	Fixes with Dell BIOS setup
+  volknob	Fixes with volume-knob widget 0x24
   auto		BIOS setup (default)
 
 STAC92HD71B*

MAINTAINERS

@@ -577,6 +577,11 @@ M:	Mike Rapoport <mike@compulab.co.il>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 
+ARM/CONTEC MICRO9 MACHINE SUPPORT
+M:	Hubert Feurstein <hubert.feurstein@contec.at>
+S:	Maintained
+F:	arch/arm/mach-ep93xx/micro9.c
+
 ARM/CORGI MACHINE SUPPORT
 M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
@@ -1231,6 +1236,13 @@ L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
+BROCADE BFA FC SCSI DRIVER
+P:      Jing Huang
+M:      huangj@brocade.com
+L:      linux-scsi@vger.kernel.org
+S:      Supported
+F:      drivers/scsi/bfa/
+
 BSG (block layer generic sg v4 driver)
 M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
@@ -2058,7 +2070,7 @@ S:	Maintained
 F:	fs/*
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-M:	Riku Voipio <riku.vipio@iki.fi>
+M:	Riku Voipio <riku.voipio@iki.fi>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/f75375s.c
@@ -2603,6 +2615,7 @@ L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
 S:	Maintained
+F:	Documentation/debugging-via-ohci1394.txt
 F:	drivers/ieee1394/
 
 IEEE 1394 RAW I/O DRIVER
@@ -4064,6 +4077,13 @@ M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
 M:	Paul Mackerras <paulus@samba.org>
 M:	Ingo Molnar <mingo@elte.hu>
 S:	Supported
+F:	kernel/perf_event.c
+F:	include/linux/perf_event.h
+F:	arch/*/*/kernel/perf_event.c
+F:	arch/*/include/asm/perf_event.h
+F:	arch/*/lib/perf_event.c
+F:	arch/*/kernel/perf_callchain.c
+F:	tools/perf/
 
 PERSONALITY HANDLING
 M:	Christoph Hellwig <hch@infradead.org>
@@ -4646,6 +4666,14 @@ F:	drivers/ata/
 F:	include/linux/ata.h
 F:	include/linux/libata.h
 
+SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER
+P:     Jayamohan Kallickal
+M:     jayamohank@serverengines.com
+L:     linux-scsi@vger.kernel.org
+W:     http://www.serverengines.com
+S:     Supported
+F:     drivers/scsi/be2iscsi/
+
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
 M:	Sathya Perla <sathyap@serverengines.com>
 M:	Subbu Seetharaman <subbus@serverengines.com>

Makefile

 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 32
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
@@ -179,46 +179,9 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 # Alternatively CROSS_COMPILE can be set in the environment.
 # Default value for CROSS_COMPILE is not to prefix executables
 # Note: Some architectures assign CROSS_COMPILE in their arch/*/Makefile
-#
-# To force ARCH and CROSS_COMPILE settings include kernel.* files
-# in the kernel tree - do not patch this file.
 export KBUILD_BUILDHOST := $(SUBARCH)
-
-# Kbuild save the ARCH and CROSS_COMPILE setting in kernel.* files.
-# Restore these settings and check that user did not specify
-# conflicting values.
-
-saved_arch  := $(shell cat include/generated/kernel.arch  2> /dev/null)
-saved_cross := $(shell cat include/generated/kernel.cross 2> /dev/null)
-
-ifneq ($(CROSS_COMPILE),)
-        ifneq ($(saved_cross),)
-                ifneq ($(CROSS_COMPILE),$(saved_cross))
-                        $(error CROSS_COMPILE changed from \
-                                "$(saved_cross)" to \
-                                 to "$(CROSS_COMPILE)". \
-                                 Use "make mrproper" to fix it up)
-                endif
-        endif
-else
-    CROSS_COMPILE := $(saved_cross)
-endif
-
-ifneq ($(ARCH),)
-        ifneq ($(saved_arch),)
-                ifneq ($(saved_arch),$(ARCH))
-                        $(error ARCH changed from \
-                                "$(saved_arch)" to "$(ARCH)". \
-                                 Use "make mrproper" to fix it up)
-                endif
-        endif
-else
-        ifneq ($(saved_arch),)
-                ARCH := $(saved_arch)
-        else
-                ARCH := $(SUBARCH)
-        endif
-endif
+ARCH		?= $(SUBARCH)
+CROSS_COMPILE	?=
 
 # Architecture as present in compile.h
 UTS_MACHINE 	:= $(ARCH)
@@ -483,11 +446,6 @@ ifeq ($(config-targets),1)
 include $(srctree)/arch/$(SRCARCH)/Makefile
 export KBUILD_DEFCONFIG KBUILD_KCONFIG
 
-# save ARCH & CROSS_COMPILE settings
-$(shell mkdir -p include/generated &&                            \
-        echo $(ARCH)          > include/generated/kernel.arch && \
-        echo $(CROSS_COMPILE) > include/generated/kernel.cross)
-
 config: scripts_basic outputmakefile FORCE
 	$(Q)mkdir -p include/linux include/config
 	$(Q)$(MAKE) $(build)=scripts/kconfig $@

arch/arm/include/asm/bitops.h

@@ -84,7 +84,7 @@ ____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res | mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -101,7 +101,7 @@ ____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res & ~mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 static inline int
@@ -118,7 +118,7 @@ ____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p)
 	*p = res ^ mask;
 	raw_local_irq_restore(flags);
 
-	return res & mask;
+	return (res & mask) != 0;
 }
 
 #include <asm-generic/bitops/non-atomic.h>

arch/arm/kernel/time.c

@@ -21,6 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/time.h>
 #include <linux/init.h>
+#include <linux/sched.h>
 #include <linux/smp.h>
 #include <linux/timex.h>
 #include <linux/errno.h>

arch/arm/kernel/traps.c

@@ -45,21 +45,21 @@ static int __init user_debug_setup(char *str)
 __setup("user_debug=", user_debug_setup);
 #endif
 
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top);
+static void dump_mem(const char *, const char *, unsigned long, unsigned long);
 
 void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame)
 {
 #ifdef CONFIG_KALLSYMS
-	printk("[<%08lx>] ", where);
-	print_symbol("(%s) ", where);
-	printk("from [<%08lx>] ", from);
-	print_symbol("(%s)\n", from);
+	char sym1[KSYM_SYMBOL_LEN], sym2[KSYM_SYMBOL_LEN];
+	sprint_symbol(sym1, where);
+	sprint_symbol(sym2, from);
+	printk("[<%08lx>] (%s) from [<%08lx>] (%s)\n", where, sym1, from, sym2);
 #else
 	printk("Function entered at [<%08lx>] from [<%08lx>]\n", where, from);
 #endif
 
 	if (in_exception_text(where))
-		dump_mem("Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
+		dump_mem("", "Exception stack", frame + 4, frame + 4 + sizeof(struct pt_regs));
 }
 
 #ifndef CONFIG_ARM_UNWIND
@@ -81,9 +81,10 @@ static int verify_stack(unsigned long sp)
 /*
  * Dump out the contents of some memory nicely...
  */
-static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
+static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
+		     unsigned long top)
 {
-	unsigned long p = bottom & ~31;
+	unsigned long first;
 	mm_segment_t fs;
 	int i;
 
@@ -95,33 +96,37 @@ static void dump_mem(const char *str, unsigned long bottom, unsigned long top)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("%s(0x%08lx to 0x%08lx)\n", str, bottom, top);
+	printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
 
-	for (p = bottom & ~31; p < top;) {
-		printk("%04lx: ", p & 0xffff);
+	for (first = bottom & ~31; first < top; first += 32) {
+		unsigned long p;
+		char str[sizeof(" 12345678") * 8 + 1];
 
-		for (i = 0; i < 8; i++, p += 4) {
-			unsigned int val;
+		memset(str, ' ', sizeof(str));
+		str[sizeof(str) - 1] = '\0';
 
-			if (p < bottom || p >= top)
-				printk("         ");
-			else {
-				__get_user(val, (unsigned long *)p);
-				printk("%08x ", val);
+		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
+			if (p >= bottom && p < top) {
+				unsigned long val;
+				if (__get_user(val, (unsigned long *)p) == 0)
+					sprintf(str + i * 9, " %08lx", val);
+				else
+					sprintf(str + i * 9, " ????????");
 			}
 		}
-		printk ("\n");
+		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
 	}
 
 	set_fs(fs);
 }
 
-static void dump_instr(struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
 	const int width = thumb ? 4 : 8;
 	mm_segment_t fs;
+	char str[sizeof("00000000 ") * 5 + 2 + 1], *p = str;
 	int i;
 
 	/*
@@ -132,7 +137,6 @@ static void dump_instr(struct pt_regs *regs)
 	fs = get_fs();
 	set_fs(KERNEL_DS);
 
-	printk("Code: ");
 	for (i = -4; i < 1; i++) {
 		unsigned int val, bad;
 
@@ -142,13 +146,14 @@ static void dump_instr(struct pt_regs *regs)
 			bad = __get_user(val, &((u32 *)addr)[i]);
 
 		if (!bad)
-			printk(i == 0 ? "(%0*x) " : "%0*x ", width, val);
+			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
+					width, val);
 		else {
-			printk("bad PC value.");
+			p += sprintf(p, "bad PC value");
 			break;
 		}
 	}
-	printk("\n");
+	printk("%sCode: %s\n", lvl, str);
 
 	set_fs(fs);
 }
@@ -224,18 +229,19 @@ static void __die(const char *str, int err, struct thread_info *thread, struct p
 	struct task_struct *tsk = thread->task;
 	static int die_counter;
 
-	printk("Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
+	printk(KERN_EMERG "Internal error: %s: %x [#%d]" S_PREEMPT S_SMP "\n",
 	       str, err, ++die_counter);
+	sysfs_printk_last_file();
 	print_modules();
 	__show_regs(regs);
-	printk("Process %s (pid: %d, stack limit = 0x%p)\n",
-		tsk->comm, task_pid_nr(tsk), thread + 1);
+	printk(KERN_EMERG "Process %.*s (pid: %d, stack limit = 0x%p)\n",
+		TASK_COMM_LEN, tsk->comm, task_pid_nr(tsk), thread + 1);
 
 	if (!user_mode(regs) || in_interrupt()) {
-		dump_mem("Stack: ", regs->ARM_sp,
+		dump_mem(KERN_EMERG, "Stack: ", regs->ARM_sp,
 			 THREAD_SIZE + (unsigned long)task_stack_page(tsk));
 		dump_backtrace(regs, tsk);
-		dump_instr(regs);
+		dump_instr(KERN_EMERG, regs);
 	}
 }
 
@@ -250,13 +256,14 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 
 	oops_enter();
 
-	console_verbose();
 	spin_lock_irq(&die_lock);
+	console_verbose();
 	bust_spinlocks(1);
 	__die(str, err, thread, regs);
 	bust_spinlocks(0);
 	add_taint(TAINT_DIE);
 	spin_unlock_irq(&die_lock);
+	oops_exit();
 
 	if (in_interrupt())
 		panic("Fatal exception in interrupt");
@@ -264,7 +271,6 @@ NORET_TYPE void die(const char *str, struct pt_regs *regs, int err)
 	if (panic_on_oops)
 		panic("Fatal exception");
 
-	oops_exit();
 	do_exit(SIGSEGV);
 }
 
@@ -349,7 +355,7 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
 	if (user_debug & UDBG_UNDEFINED) {
 		printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n",
 			current->comm, task_pid_nr(current), pc);
-		dump_instr(regs);
+		dump_instr(KERN_INFO, regs);
 	}
 #endif
 
@@ -400,7 +406,7 @@ static int bad_syscall(int n, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk(KERN_ERR "[%d] %s: obsolete system call %08x.\n",
 			task_pid_nr(current), current->comm, n);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 	}
 #endif
 
@@ -579,7 +585,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
 	if (user_debug & UDBG_SYSCALL) {
 		printk("[%d] %s: arm syscall %d\n",
 		       task_pid_nr(current), current->comm, no);
-		dump_instr(regs);
+		dump_instr("", regs);
 		if (user_mode(regs)) {
 			__show_regs(regs);
 			c_backtrace(regs->ARM_fp, processor_mode(regs));
@@ -656,7 +662,7 @@ baddataabort(int code, unsigned long instr, struct pt_regs *regs)
 	if (user_debug & UDBG_BADABORT) {
 		printk(KERN_ERR "[%d] %s: bad data abort: code %d instr 0x%08lx\n",
 			task_pid_nr(current), current->comm, code, instr);
-		dump_instr(regs);
+		dump_instr(KERN_ERR, regs);
 		show_pte(current->mm, addr);
 	}
 #endif

arch/arm/mach-bcmring/core.c

@@ -271,12 +271,12 @@ static struct irqaction bcmring_timer_irq = {
 	.handler = bcmring_timer_interrupt,
 };
 
-static cycle_t bcmring_get_cycles_timer1(void)
+static cycle_t bcmring_get_cycles_timer1(struct clocksource *cs)
 {
 	return ~readl(TIMER1_VA_BASE + TIMER_VALUE);
 }
 
-static cycle_t bcmring_get_cycles_timer3(void)
+static cycle_t bcmring_get_cycles_timer3(struct clocksource *cs)
 {
 	return ~readl(TIMER3_VA_BASE + TIMER_VALUE);
 }

arch/arm/mach-bcmring/include/mach/system.h

@@ -29,7 +29,7 @@ static inline void arch_idle(void)
 	cpu_do_idle();
 }
 
-static inline void arch_reset(char mode, char *cmd)
+static inline void arch_reset(char mode, const char *cmd)
 {
 	printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot);
 

arch/arm/mach-ep93xx/Kconfig

@@ -17,13 +17,31 @@ config EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	bool "0x00000000 - SDCE3/SyncBoot"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0x00000000
+	  first SDRAM bank at 0x00000000.
 
 config EP93XX_SDCE0_PHYS_OFFSET
 	bool "0xc0000000 - SDCEO"
 	help
 	  Select this option if you want support for EP93xx boards with the
-	  first SDRAM bank at 0xc0000000
+	  first SDRAM bank at 0xc0000000.
+
+config EP93XX_SDCE1_PHYS_OFFSET
+	bool "0xd0000000 - SDCE1"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xd0000000.
+
+config EP93XX_SDCE2_PHYS_OFFSET
+	bool "0xe0000000 - SDCE2"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xe0000000.
+
+config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	bool "0xf0000000 - SDCE3/AsyncBoot"
+	help
+	  Select this option if you want support for EP93xx boards with the
+	  first SDRAM bank at 0xf0000000.
 
 endchoice
 
@@ -112,28 +130,36 @@ config MACH_MICRO9
 	bool
 
 config MACH_MICRO9H
-	bool "Support Contec Hypercontrol Micro9-H"
+	bool "Support Contec Micro9-High"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-H board.
+	  Contec Micro9-High board.
 
 config MACH_MICRO9M
-	bool "Support Contec Hypercontrol Micro9-M"
-	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
+	bool "Support Contec Micro9-Mid"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-M board.
+	  Contec Micro9-Mid board.
 
 config MACH_MICRO9L
-	bool "Support Contec Hypercontrol Micro9-L"
+	bool "Support Contec Micro9-Lite"
 	depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 	select MACH_MICRO9
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  Contec Hypercontrol Micro9-L board.
+	  Contec Micro9-Lite board.
+
+config MACH_MICRO9S
+	bool "Support Contec Micro9-Slim"
+	depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
+	select MACH_MICRO9
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Contec Micro9-Slim board.
 
 config MACH_TS72XX
 	bool "Support Technologic Systems TS-72xx SBC"

arch/arm/mach-ep93xx/Makefile.boot

@@ -3,3 +3,12 @@ params_phys-$(CONFIG_EP93XX_SDCE3_SYNC_PHYS_OFFSET)	:= 0x00000100
 
    zreladdr-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0008000
 params_phys-$(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)		:= 0xc0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0008000
+params_phys-$(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)		:= 0xd0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0008000
+params_phys-$(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)		:= 0xe0000100
+
+   zreladdr-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0008000
+params_phys-$(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)	:= 0xf0000100

arch/arm/mach-ep93xx/clock.c

@@ -16,13 +16,16 @@
 #include <linux/module.h>
 #include <linux/string.h>
 #include <linux/io.h>
+#include <linux/spinlock.h>
+
+#include <mach/hardware.h>
 
 #include <asm/clkdev.h>
 #include <asm/div64.h>
-#include <mach/hardware.h>
 
 
 struct clk {
+	struct clk	*parent;
 	unsigned long	rate;
 	int		users;
 	int		sw_locked;
@@ -39,40 +42,60 @@ static unsigned long get_uart_rate(struct clk *clk);
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
 
+
+static struct clk clk_xtali = {
+	.rate		= EP93XX_EXT_CLK_RATE,
+};
 static struct clk clk_uart1 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U1EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart2 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U2EN,
 	.get_rate	= get_uart_rate,
 };
 static struct clk clk_uart3 = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_DEVCFG,
 	.enable_mask	= EP93XX_SYSCON_DEVCFG_U3EN,
 	.get_rate	= get_uart_rate,
 };
-static struct clk clk_pll1;
-static struct clk clk_f;
-static struct clk clk_h;
-static struct clk clk_p;
-static struct clk clk_pll2;
+static struct clk clk_pll1 = {
+	.parent		= &clk_xtali,
+};
+static struct clk clk_f = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_h = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_p = {
+	.parent		= &clk_pll1,
+};
+static struct clk clk_pll2 = {
+	.parent		= &clk_xtali,
+};
 static struct clk clk_usb_host = {
+	.parent		= &clk_pll2,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_USH_EN,
 };
 static struct clk clk_keypad = {
+	.parent		= &clk_xtali,
 	.sw_locked	= 1,
 	.enable_reg	= EP93XX_SYSCON_KEYTCHCLKDIV,
 	.enable_mask	= EP93XX_SYSCON_KEYTCHCLKDIV_KEN,
 	.set_rate	= set_keytchclk_rate,
 };
 static struct clk clk_pwm = {
+	.parent		= &clk_xtali,
 	.rate		= EP93XX_EXT_CLK_RATE,
 };
 
@@ -85,50 +108,62 @@ static struct clk clk_video = {
 
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P0,
 };
 static struct clk clk_m2p1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P1,
 };
 static struct clk clk_m2p2 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P2,
 };
 static struct clk clk_m2p3 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P3,
 };
 static struct clk clk_m2p4 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P4,
 };
 static struct clk clk_m2p5 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P5,
 };
 static struct clk clk_m2p6 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P6,
 };
 static struct clk clk_m2p7 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P7,
 };
 static struct clk clk_m2p8 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P8,
 };
 static struct clk clk_m2p9 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2P9,
 };
 static struct clk clk_m2m0 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M0,
 };
 static struct clk clk_m2m1 = {
+	.parent		= &clk_h,
 	.enable_reg	= EP93XX_SYSCON_PWRCNT,
 	.enable_mask	= EP93XX_SYSCON_PWRCNT_DMA_M2M1,
 };
@@ -137,6 +172,7 @@ static struct clk clk_m2m1 = {
 	{ .dev_id = dev, .con_id = con, .clk = ck }
 
 static struct clk_lookup clocks[] = {
+	INIT_CK(NULL,			"xtali",	&clk_xtali),
 	INIT_CK("apb:uart1",		NULL,		&clk_uart1),
 	INIT_CK("apb:uart2",		NULL,		&clk_uart2),
 	INIT_CK("apb:uart3",		NULL,		&clk_uart3),
@@ -163,48 +199,84 @@ static struct clk_lookup clocks[] = {
 	INIT_CK(NULL,			"m2m1",		&clk_m2m1),
 };
 
+static DEFINE_SPINLOCK(clk_lock);
+
+static void __clk_enable(struct clk *clk)
+{
+	if (!clk->users++) {
+		if (clk->parent)
+			__clk_enable(clk->parent);
+
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v |= clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
+	}
+}
 
 int clk_enable(struct clk *clk)
 {
-	if (!clk->users++ && clk->enable_reg) {
-		u32 value;
+	unsigned long flags;
 
-		value = __raw_readl(clk->enable_reg);
-		value |= clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
-	}
+	if (!clk)
+		return -EINVAL;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_enable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
 
 	return 0;
 }
 EXPORT_SYMBOL(clk_enable);
 
-void clk_disable(struct clk *clk)
+static void __clk_disable(struct clk *clk)
 {
-	if (!--clk->users && clk->enable_reg) {
-		u32 value;
+	if (!--clk->users) {
+		if (clk->enable_reg) {
+			u32 v;
+
+			v = __raw_readl(clk->enable_reg);
+			v &= ~clk->enable_mask;
+			if (clk->sw_locked)
+				ep93xx_syscon_swlocked_write(v, clk->enable_reg);
+			else
+				__raw_writel(v, clk->enable_reg);
+		}
 
-		value = __raw_readl(clk->enable_reg);
-		value &= ~clk->enable_mask;
-		if (clk->sw_locked)
-			ep93xx_syscon_swlocked_write(value, clk->enable_reg);
-		else
-			__raw_writel(value, clk->enable_reg);
+		if (clk->parent)
+			__clk_disable(clk->parent);
 	}
 }
+
+void clk_disable(struct clk *clk)
+{
+	unsigned long flags;
+
+	if (!clk)
+		return;
+
+	spin_lock_irqsave(&clk_lock, flags);
+	__clk_disable(clk);
+	spin_unlock_irqrestore(&clk_lock, flags);
+}
 EXPORT_SYMBOL(clk_disable);
 
 static unsigned long get_uart_rate(struct clk *clk)
 {
+	unsigned long rate = clk_get_rate(clk->parent);
 	u32 value;
 
 	value = __raw_readl(EP93XX_SYSCON_PWRCNT);
 	if (value & EP93XX_SYSCON_PWRCNT_UARTBAUD)
-		return EP93XX_EXT_CLK_RATE;
+		return rate;
 	else
-		return EP93XX_EXT_CLK_RATE / 2;
+		return rate / 2;
 }
 
 unsigned long clk_get_rate(struct clk *clk)
@@ -244,16 +316,16 @@ static int set_keytchclk_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
-				  int *pdiv, int *div)
+static int calc_clk_div(struct clk *clk, unsigned long rate,
+			int *psel, int *esel, int *pdiv, int *div)
 {
-	unsigned long max_rate, best_rate = 0,
-		actual_rate = 0, mclk_rate = 0, rate_err = -1;
+	struct clk *mclk;
+	unsigned long max_rate, actual_rate, mclk_rate, rate_err = -1;
 	int i, found = 0, __div = 0, __pdiv = 0;
 
 	/* Don't exceed the maximum rate */
 	max_rate = max(max(clk_pll1.rate / 4, clk_pll2.rate / 4),
-		       (unsigned long)EP93XX_EXT_CLK_RATE / 4);
+		       clk_xtali.rate / 4);
 	rate = min(rate, max_rate);
 
 	/*
@@ -267,11 +339,12 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	 */
 	for (i = 0; i < 3; i++) {
 		if (i == 0)
-			mclk_rate = EP93XX_EXT_CLK_RATE * 2;
+			mclk = &clk_xtali;
 		else if (i == 1)
-			mclk_rate = clk_pll1.rate * 2;
-		else if (i == 2)
-			mclk_rate = clk_pll2.rate * 2;
+			mclk = &clk_pll1;
+		else
+			mclk = &clk_pll2;
+		mclk_rate = mclk->rate * 2;
 
 		/* Try each predivider value */
 		for (__pdiv = 4; __pdiv <= 6; __pdiv++) {
@@ -286,7 +359,8 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 				*div = __div;
 				*psel = (i == 2);
 				*esel = (i != 0);
-				best_rate = actual_rate;
+				clk->parent = mclk;
+				clk->rate = actual_rate;
 				rate_err = abs(actual_rate - rate);
 				found = 1;
 			}
@@ -294,21 +368,19 @@ static unsigned long calc_clk_div(unsigned long rate, int *psel, int *esel,
 	}
 
 	if (!found)
-		return 0;
+		return -EINVAL;
 
-	return best_rate;
+	return 0;
 }
 
 static int set_div_rate(struct clk *clk, unsigned long rate)
 {
-	unsigned long actual_rate;
-	int psel = 0, esel = 0, pdiv = 0, div = 0;
+	int err, psel = 0, esel = 0, pdiv = 0, div = 0;
 	u32 val;
 
-	actual_rate = calc_clk_div(rate, &psel, &esel, &pdiv, &div);
-	if (actual_rate == 0)
-		return -EINVAL;
-	clk->rate = actual_rate;
+	err = calc_clk_div(clk, rate, &psel, &esel, &pdiv, &div);
+	if (err)
+		return err;
 
 	/* Clear the esel, psel, pdiv and div bits */
 	val = __raw_readl(clk->enable_reg);
@@ -344,7 +416,7 @@ static unsigned long calc_pll_rate(u32 config_word)
 	unsigned long long rate;
 	int i;
 
-	rate = EP93XX_EXT_CLK_RATE;
+	rate = clk_xtali.rate;
 	rate *= ((config_word >> 11) & 0x1f) + 1;		/* X1FBD */
 	rate *= ((config_word >> 5) & 0x3f) + 1;		/* X2FBD */
 	do_div(rate, (config_word & 0x1f) + 1);			/* X2IPD */
@@ -377,7 +449,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
 	if (!(value & 0x00800000)) {			/* PLL1 bypassed?  */
-		clk_pll1.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll1.rate = clk_xtali.rate;
 	} else {
 		clk_pll1.rate = calc_pll_rate(value);
 	}
@@ -388,7 +460,7 @@ static int __init ep93xx_clock_init(void)
 
 	value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
 	if (!(value & 0x00080000)) {			/* PLL2 bypassed?  */
-		clk_pll2.rate = EP93XX_EXT_CLK_RATE;
+		clk_pll2.rate = clk_xtali.rate;
 	} else if (value & 0x00040000) {		/* PLL2 enabled?  */
 		clk_pll2.rate = calc_pll_rate(value);
 	} else {

arch/arm/mach-ep93xx/core.c

@@ -550,13 +550,11 @@ void __init ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr)
 	platform_device_register(&ep93xx_eth_device);
 }
 
-static struct i2c_gpio_platform_data ep93xx_i2c_data = {
-	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
-	.sda_is_open_drain	= 0,
-	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
-	.scl_is_open_drain	= 0,
-	.udelay			= 2,
-};
+
+/*************************************************************************
+ * EP93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data ep93xx_i2c_data;
 
 static struct platform_device ep93xx_i2c_device = {
 	.name			= "i2c-gpio",
@@ -564,8 +562,25 @@ static struct platform_device ep93xx_i2c_device = {
 	.dev.platform_data	= &ep93xx_i2c_data,
 };
 
-void __init ep93xx_register_i2c(struct i2c_board_info *devices, int num)
+void __init ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+				struct i2c_board_info *devices, int num)
 {
+	/*
+	 * Set the EEPROM interface pin drive type control.
+	 * Defines the driver type for the EECLK and EEDAT pins as either
+	 * open drain, which will require an external pull-up, or a normal
+	 * CMOS driver.
+	 */
+	if (data->sda_is_open_drain && data->sda_pin != EP93XX_GPIO_LINE_EEDAT)
+		pr_warning("ep93xx: sda != EEDAT, open drain has no effect\n");
+	if (data->scl_is_open_drain && data->scl_pin != EP93XX_GPIO_LINE_EECLK)
+		pr_warning("ep93xx: scl != EECLK, open drain has no effect\n");
+
+	__raw_writel((data->sda_is_open_drain << 1) |
+		     (data->scl_is_open_drain << 0),
+		     EP93XX_GPIO_EEDRIVE);
+
+	ep93xx_i2c_data = *data;
 	i2c_register_board_info(0, devices, num);
 	platform_device_register(&ep93xx_i2c_device);
 }

arch/arm/mach-ep93xx/edb93xx.c

@@ -27,8 +27,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/i2c.h>
 #include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
 
 #include <mach/hardware.h>
 
@@ -76,13 +78,26 @@ static struct ep93xx_eth_data edb93xx_eth_data = {
 	.phy_id		= 1,
 };
 
-static struct i2c_board_info __initdata edb93xxa_i2c_data[] = {
+
+/*************************************************************************
+ * EDB93xx i2c peripheral handling
+ *************************************************************************/
+static struct i2c_gpio_platform_data edb93xx_i2c_gpio_data = {
+	.sda_pin		= EP93XX_GPIO_LINE_EEDAT,
+	.sda_is_open_drain	= 0,
+	.scl_pin		= EP93XX_GPIO_LINE_EECLK,
+	.scl_is_open_drain	= 0,
+	.udelay			= 0,	/* default to 100 kHz */
+	.timeout		= 0,	/* default to 100 ms */
+};
+
+static struct i2c_board_info __initdata edb93xxa_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("isl1208", 0x6f),
 	},
 };
 
-static struct i2c_board_info __initdata edb93xx_i2c_data[] = {
+static struct i2c_board_info __initdata edb93xx_i2c_board_info[] = {
 	{
 		I2C_BOARD_INFO("ds1337", 0x68),
 	},
@@ -92,12 +107,14 @@ static void __init edb93xx_register_i2c(void)
 {
 	if (machine_is_edb9302a() || machine_is_edb9307a() ||
 	    machine_is_edb9315a()) {
-		ep93xx_register_i2c(edb93xxa_i2c_data,
-				ARRAY_SIZE(edb93xxa_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
+				    edb93xxa_i2c_board_info,
+				    ARRAY_SIZE(edb93xxa_i2c_board_info));
 	} else if (machine_is_edb9307() || machine_is_edb9312() ||
 		   machine_is_edb9315()) {
-		ep93xx_register_i2c(edb93xx_i2c_data,
-				ARRAY_SIZE(edb93xx_i2c_data));
+		ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+				    edb93xx_i2c_board_info,
+				    ARRAY_SIZE(edb93xx_i2c_board_info));
 	}
 }
 

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -52,25 +52,27 @@
 #define EP93XX_AHB_VIRT_BASE		0xfef00000
 #define EP93XX_AHB_SIZE			0x00100000
 
+#define EP93XX_AHB_PHYS(x)		(EP93XX_AHB_PHYS_BASE + (x))
 #define EP93XX_AHB_IOMEM(x)		IOMEM(EP93XX_AHB_VIRT_BASE + (x))
 
 #define EP93XX_APB_PHYS_BASE		0x80800000
 #define EP93XX_APB_VIRT_BASE		0xfed00000
 #define EP93XX_APB_SIZE			0x00200000
 
+#define EP93XX_APB_PHYS(x)		(EP93XX_APB_PHYS_BASE + (x))
 #define EP93XX_APB_IOMEM(x)		IOMEM(EP93XX_APB_VIRT_BASE + (x))
 
 
 /* AHB peripherals */
 #define EP93XX_DMA_BASE			EP93XX_AHB_IOMEM(0x00000000)
 
-#define EP93XX_ETHERNET_PHYS_BASE	(EP93XX_AHB_PHYS_BASE + 0x00010000)
+#define EP93XX_ETHERNET_PHYS_BASE	EP93XX_AHB_PHYS(0x00010000)
 #define EP93XX_ETHERNET_BASE		EP93XX_AHB_IOMEM(0x00010000)
 
-#define EP93XX_USB_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00020000)
+#define EP93XX_USB_PHYS_BASE		EP93XX_AHB_PHYS(0x00020000)
 #define EP93XX_USB_BASE			EP93XX_AHB_IOMEM(0x00020000)
 
-#define EP93XX_RASTER_PHYS_BASE		(EP93XX_AHB_PHYS_BASE + 0x00030000)
+#define EP93XX_RASTER_PHYS_BASE		EP93XX_AHB_PHYS(0x00030000)
 #define EP93XX_RASTER_BASE		EP93XX_AHB_IOMEM(0x00030000)
 
 #define EP93XX_GRAPHICS_ACCEL_BASE	EP93XX_AHB_IOMEM(0x00040000)
@@ -112,21 +114,10 @@
 
 #define EP93XX_GPIO_BASE		EP93XX_APB_IOMEM(0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
-#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
-#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
-#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
-#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
 #define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
-#define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
-#define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
-#define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
-#define EP93XX_GPIO_A_INT_ENABLE	EP93XX_GPIO_REG(0x9c)
 #define EP93XX_GPIO_A_INT_STATUS	EP93XX_GPIO_REG(0xa0)
-#define EP93XX_GPIO_B_INT_TYPE1		EP93XX_GPIO_REG(0xac)
-#define EP93XX_GPIO_B_INT_TYPE2		EP93XX_GPIO_REG(0xb0)
-#define EP93XX_GPIO_B_INT_ACK		EP93XX_GPIO_REG(0xb4)
-#define EP93XX_GPIO_B_INT_ENABLE	EP93XX_GPIO_REG(0xb8)
 #define EP93XX_GPIO_B_INT_STATUS	EP93XX_GPIO_REG(0xbc)
+#define EP93XX_GPIO_EEDRIVE		EP93XX_GPIO_REG(0xc8)
 
 #define EP93XX_AAC_BASE			EP93XX_APB_IOMEM(0x00080000)
 
@@ -134,13 +125,13 @@
 
 #define EP93XX_IRDA_BASE		EP93XX_APB_IOMEM(0x000b0000)
 
-#define EP93XX_UART1_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000c0000)
+#define EP93XX_UART1_PHYS_BASE		EP93XX_APB_PHYS(0x000c0000)
 #define EP93XX_UART1_BASE		EP93XX_APB_IOMEM(0x000c0000)
 
-#define EP93XX_UART2_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000d0000)
+#define EP93XX_UART2_PHYS_BASE		EP93XX_APB_PHYS(0x000d0000)
 #define EP93XX_UART2_BASE		EP93XX_APB_IOMEM(0x000d0000)
 
-#define EP93XX_UART3_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x000e0000)
+#define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
@@ -148,10 +139,10 @@
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
 #define EP93XX_TOUCHSCREEN_BASE		EP93XX_APB_IOMEM(0x00100000)
 
-#define EP93XX_PWM_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00110000)
+#define EP93XX_PWM_PHYS_BASE		EP93XX_APB_PHYS(0x00110000)
 #define EP93XX_PWM_BASE			EP93XX_APB_IOMEM(0x00110000)
 
-#define EP93XX_RTC_PHYS_BASE		(EP93XX_APB_PHYS_BASE + 0x00120000)
+#define EP93XX_RTC_PHYS_BASE		EP93XX_APB_PHYS(0x00120000)
 #define EP93XX_RTC_BASE			EP93XX_APB_IOMEM(0x00120000)
 
 #define EP93XX_SYSCON_BASE		EP93XX_APB_IOMEM(0x00130000)
@@ -218,6 +209,17 @@
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KEN	(1<<15)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_KDIV	(1<<0)
+#define EP93XX_SYSCON_SYSCFG		EP93XX_SYSCON_REG(0x9c)
+#define EP93XX_SYSCON_SYSCFG_REV_MASK	(0xf0000000)
+#define EP93XX_SYSCON_SYSCFG_REV_SHIFT	(28)
+#define EP93XX_SYSCON_SYSCFG_SBOOT	(1<<8)
+#define EP93XX_SYSCON_SYSCFG_LCSN7	(1<<7)
+#define EP93XX_SYSCON_SYSCFG_LCSN6	(1<<6)
+#define EP93XX_SYSCON_SYSCFG_LASDO	(1<<5)
+#define EP93XX_SYSCON_SYSCFG_LEEDA	(1<<4)
+#define EP93XX_SYSCON_SYSCFG_LEECLK	(1<<3)
+#define EP93XX_SYSCON_SYSCFG_LCSN2	(1<<1)
+#define EP93XX_SYSCON_SYSCFG_LCSN1	(1<<0)
 #define EP93XX_SYSCON_SWLOCK		EP93XX_SYSCON_REG(0xc0)
 
 #define EP93XX_WATCHDOG_BASE		EP93XX_APB_IOMEM(0x00140000)

arch/arm/mach-ep93xx/include/mach/gpio.h

@@ -114,17 +114,9 @@ extern void ep93xx_gpio_int_debounce(unsigned int irq, int enable);
  *          B0..B7  (7..15) to irq 72..79, and
  *          F0..F7 (16..24) to irq 80..87.
  */
-static inline int gpio_to_irq(unsigned gpio)
-{
-	if (gpio <= EP93XX_GPIO_LINE_MAX_IRQ)
-		return 64 + gpio;
-
-	return -EINVAL;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-	return irq - gpio_to_irq(0);
-}
+#define gpio_to_irq(gpio)	\
+	(((gpio) <= EP93XX_GPIO_LINE_MAX_IRQ) ? (64 + (gpio)) : -EINVAL)
+
+#define irq_to_gpio(irq)	((irq) - gpio_to_irq(0))
 
 #endif

arch/arm/mach-ep93xx/include/mach/memory.h

@@ -9,6 +9,12 @@
 #define PHYS_OFFSET		UL(0x00000000)
 #elif defined(CONFIG_EP93XX_SDCE0_PHYS_OFFSET)
 #define PHYS_OFFSET		UL(0xc0000000)
+#elif defined(CONFIG_EP93XX_SDCE1_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xd0000000)
+#elif defined(CONFIG_EP93XX_SDCE2_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xe0000000)
+#elif defined(CONFIG_EP93XX_SDCE3_ASYNC_PHYS_OFFSET)
+#define PHYS_OFFSET		UL(0xf0000000)
 #else
 #error "Kconfig bug: No EP93xx PHYS_OFFSET set"
 #endif

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -4,6 +4,7 @@
 
 #ifndef __ASSEMBLY__
 
+struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
@@ -33,7 +34,8 @@ static inline void ep93xx_devcfg_clear_bits(unsigned int bits)
 }
 
 void ep93xx_register_eth(struct ep93xx_eth_data *data, int copy_addr);
-void ep93xx_register_i2c(struct i2c_board_info *devices, int num);
+void ep93xx_register_i2c(struct i2c_gpio_platform_data *data,
+			 struct i2c_board_info *devices, int num);
 void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);

arch/arm/mach-ep93xx/micro9.c

@@ -2,7 +2,9 @@
  *  linux/arch/arm/mach-ep93xx/micro9.c
  *
  * Copyright (C) 2006 Contec Steuerungstechnik & Automation GmbH
- *                   Manfred Gruber <manfred.gruber@contec.at>
+ *                    Manfred Gruber <m.gruber@tirol.com>
+ * Copyright (C) 2009 Contec Steuerungstechnik & Automation GmbH
+ *                    Hubert Feurstein <hubert.feurstein@contec.at>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -20,104 +22,124 @@
 #include <asm/mach/arch.h>
 
 
-static struct ep93xx_eth_data micro9_eth_data = {
-	.phy_id		= 0x1f,
-};
-
-static void __init micro9_init(void)
-{
-	ep93xx_register_eth(&micro9_eth_data, 1);
-}
-
-/*
- * Micro9-H
- */
-#ifdef CONFIG_MACH_MICRO9H
-static struct physmap_flash_data micro9h_flash_data = {
-	.width		= 4,
-};
-
-static struct resource micro9h_flash_resource = {
+/*************************************************************************
+ * Micro9 NOR Flash
+ *
+ * Micro9-High has up to 64MB of 32-bit flash on CS1
+ * Micro9-Mid has up to 64MB of either 32-bit or 16-bit flash on CS1
+ * Micro9-Lite uses a seperate MTD map driver for flash support
+ * Micro9-Slim has up to 64MB of either 32-bit or 16-bit flash on CS1
+ *************************************************************************/
+static struct physmap_flash_data micro9_flash_data;
+
+static struct resource micro9_flash_resource = {
 	.start		= EP93XX_CS1_PHYS_BASE,
 	.end		= EP93XX_CS1_PHYS_BASE + SZ_64M - 1,
 	.flags		= IORESOURCE_MEM,
 };
 
-static struct platform_device micro9h_flash = {
+static struct platform_device micro9_flash = {
 	.name		= "physmap-flash",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &micro9h_flash_data,
+		.platform_data	= &micro9_flash_data,
 	},
 	.num_resources	= 1,
-	.resource	= &micro9h_flash_resource,
+	.resource	= &micro9_flash_resource,
 };
 
-static void __init micro9h_init(void)
+static void __init __micro9_register_flash(unsigned int width)
+{
+	micro9_flash_data.width = width;
+
+	platform_device_register(&micro9_flash);
+}
+
+static unsigned int __init micro9_detect_bootwidth(void)
+{
+	u32 v;
+
+	/* Detect the bus width of the external flash memory */
+	v = __raw_readl(EP93XX_SYSCON_SYSCFG);
+	if (v & EP93XX_SYSCON_SYSCFG_LCSN7)
+		return 4; /* 32-bit */
+	else
+		return 2; /* 16-bit */
+}
+
+static void __init micro9_register_flash(void)
 {
-	platform_device_register(&micro9h_flash);
+	if (machine_is_micro9())
+		__micro9_register_flash(4);
+	else if (machine_is_micro9m() || machine_is_micro9s())
+		__micro9_register_flash(micro9_detect_bootwidth());
 }
 
-static void __init micro9h_init_machine(void)
+
+/*************************************************************************
+ * Micro9 Ethernet
+ *************************************************************************/
+static struct ep93xx_eth_data micro9_eth_data = {
+	.phy_id		= 0x1f,
+};
+
+
+static void __init micro9_init_machine(void)
 {
 	ep93xx_init_devices();
-	micro9_init();
-	micro9h_init();
+	ep93xx_register_eth(&micro9_eth_data, 1);
+	micro9_register_flash();
 }
 
-MACHINE_START(MICRO9, "Contec Hypercontrol Micro9-H")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+
+#ifdef CONFIG_MACH_MICRO9H
+MACHINE_START(MICRO9, "Contec Micro9-High")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9h_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-M
- */
 #ifdef CONFIG_MACH_MICRO9M
-static void __init micro9m_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9M, "Contec Hypercontrol Micro9-M")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9M, "Contec Micro9-Mid")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
-	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9m_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
-/*
- * Micro9-L
- */
 #ifdef CONFIG_MACH_MICRO9L
-static void __init micro9l_init_machine(void)
-{
-	ep93xx_init_devices();
-	micro9_init();
-}
-
-MACHINE_START(MICRO9L, "Contec Hypercontrol Micro9-L")
-	/* Maintainer: Manfred Gruber <manfred.gruber@contec.at> */
+MACHINE_START(MICRO9L, "Contec Micro9-Lite")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
 	.phys_io	= EP93XX_APB_PHYS_BASE,
 	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
 	.boot_params	= EP93XX_SDCE3_PHYS_BASE_SYNC + 0x100,
 	.map_io		= ep93xx_map_io,
 	.init_irq	= ep93xx_init_irq,
 	.timer		= &ep93xx_timer,
-	.init_machine	= micro9l_init_machine,
+	.init_machine	= micro9_init_machine,
 MACHINE_END
 #endif
 
+#ifdef CONFIG_MACH_MICRO9S
+MACHINE_START(MICRO9S, "Contec Micro9-Slim")
+	/* Maintainer: Hubert Feurstein <hubert.feurstein@contec.at> */
+	.phys_io	= EP93XX_APB_PHYS_BASE,
+	.io_pg_offst	= ((EP93XX_APB_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= EP93XX_SDCE3_PHYS_BASE_ASYNC + 0x100,
+	.map_io		= ep93xx_map_io,
+	.init_irq	= ep93xx_init_irq,
+	.timer		= &ep93xx_timer,
+	.init_machine	= micro9_init_machine,
+MACHINE_END
+#endif

arch/arm/mach-integrator/pci_v3.c

@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <asm/irq.h>
+#include <asm/signal.h>
 #include <asm/system.h>
 #include <asm/mach/pci.h>
 #include <asm/irq_regs.h>

arch/arm/mach-omap2/board-rx51-peripherals.c

@@ -38,49 +38,49 @@
 
 static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
-	KEY(0, 1, KEY_W),
-	KEY(0, 2, KEY_E),
-	KEY(0, 3, KEY_R),
-	KEY(0, 4, KEY_T),
-	KEY(0, 5, KEY_Y),
-	KEY(0, 6, KEY_U),
-	KEY(0, 7, KEY_I),
-	KEY(1, 0, KEY_O),
+	KEY(0, 1, KEY_O),
+	KEY(0, 2, KEY_P),
+	KEY(0, 3, KEY_COMMA),
+	KEY(0, 4, KEY_BACKSPACE),
+	KEY(0, 6, KEY_A),
+	KEY(0, 7, KEY_S),
+	KEY(1, 0, KEY_W),
 	KEY(1, 1, KEY_D),
-	KEY(1, 2, KEY_DOT),
-	KEY(1, 3, KEY_V),
-	KEY(1, 4, KEY_DOWN),
-	KEY(2, 0, KEY_P),
-	KEY(2, 1, KEY_F),
+	KEY(1, 2, KEY_F),
+	KEY(1, 3, KEY_G),
+	KEY(1, 4, KEY_H),
+	KEY(1, 5, KEY_J),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_L),
+	KEY(2, 0, KEY_E),
+	KEY(2, 1, KEY_DOT),
 	KEY(2, 2, KEY_UP),
-	KEY(2, 3, KEY_B),
-	KEY(2, 4, KEY_RIGHT),
-	KEY(3, 0, KEY_COMMA),
-	KEY(3, 1, KEY_G),
-	KEY(3, 2, KEY_ENTER),
+	KEY(2, 3, KEY_ENTER),
+	KEY(2, 5, KEY_Z),
+	KEY(2, 6, KEY_X),
+	KEY(2, 7, KEY_C),
+	KEY(3, 0, KEY_R),
+	KEY(3, 1, KEY_V),
+	KEY(3, 2, KEY_B),
 	KEY(3, 3, KEY_N),
-	KEY(4, 0, KEY_BACKSPACE),
-	KEY(4, 1, KEY_H),
-	KEY(4, 3, KEY_M),
+	KEY(3, 4, KEY_M),
+	KEY(3, 5, KEY_SPACE),
+	KEY(3, 6, KEY_SPACE),
+	KEY(3, 7, KEY_LEFT),
+	KEY(4, 0, KEY_T),
+	KEY(4, 1, KEY_DOWN),
+	KEY(4, 2, KEY_RIGHT),
 	KEY(4, 4, KEY_LEFTCTRL),
-	KEY(5, 1, KEY_J),
-	KEY(5, 2, KEY_Z),
-	KEY(5, 3, KEY_SPACE),
-	KEY(5, 4, KEY_LEFTSHIFT),
-	KEY(6, 0, KEY_A),
-	KEY(6, 1, KEY_K),
-	KEY(6, 2, KEY_X),
-	KEY(6, 3, KEY_SPACE),
-	KEY(6, 4, KEY_FN),
-	KEY(7, 0, KEY_S),
-	KEY(7, 1, KEY_L),
-	KEY(7, 2, KEY_C),
-	KEY(7, 3, KEY_LEFT),
-	KEY(0xff, 0, KEY_F6),
-	KEY(0xff, 1, KEY_F7),
-	KEY(0xff, 2, KEY_F8),
-	KEY(0xff, 4, KEY_F9),
-	KEY(0xff, 5, KEY_F10),
+	KEY(4, 5, KEY_RIGHTALT),
+	KEY(4, 6, KEY_LEFTSHIFT),
+	KEY(5, 0, KEY_Y),
+	KEY(6, 0, KEY_U),
+	KEY(7, 0, KEY_I),
+	KEY(7, 1, KEY_F7),
+	KEY(7, 2, KEY_F8),
+	KEY(0xff, 2, KEY_F9),
+	KEY(0xff, 4, KEY_F10),
+	KEY(0xff, 5, KEY_F11),
 };
 
 static struct matrix_keymap_data board_map_data = {

arch/arm/mach-pxa/cpufreq-pxa2xx.c

@@ -155,7 +155,7 @@ MODULE_PARM_DESC(pxa255_turbo_table, "Selects the frequency table (0 = run table
 
 static pxa_freqs_t pxa27x_freqs[] = {
 	{104000, 104000, PXA27x_CCCR(1,	 8, 2), 0, CCLKCFG2(1, 0, 1),  900000, 1705000 },
-	{156000, 104000, PXA27x_CCCR(1,	 8, 6), 0, CCLKCFG2(1, 1, 1), 1000000, 1705000 },
+	{156000, 104000, PXA27x_CCCR(1,	 8, 3), 0, CCLKCFG2(1, 0, 1), 1000000, 1705000 },
 	{208000, 208000, PXA27x_CCCR(0, 16, 2), 1, CCLKCFG2(0, 0, 1), 1180000, 1705000 },
 	{312000, 208000, PXA27x_CCCR(1, 16, 3), 1, CCLKCFG2(1, 0, 1), 1250000, 1705000 },
 	{416000, 208000, PXA27x_CCCR(1, 16, 4), 1, CCLKCFG2(1, 0, 1), 1350000, 1705000 },

arch/arm/mach-pxa/csb726.c

@@ -238,7 +238,7 @@ static struct resource csb726_lan_resources[] = {
 };
 
 struct smsc911x_platform_config csb726_lan_config = {
-	.irq_type	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,

arch/arm/mach-sa1100/Makefile

@@ -25,6 +25,7 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
+obj-$(CONFIG_SA1100_H3100)		+= h3600.o
 obj-$(CONFIG_SA1100_H3600)		+= h3600.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o

arch/arm/mm/cache-v6.S

@@ -12,6 +12,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -121,11 +122,13 @@ ENTRY(v6_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v6_coherent_user_range)
-
+ UNWIND(.fnstart		)
 #ifdef HARVARD_CACHE
 	bic	r0, r0, #CACHE_LINE_SIZE - 1
-1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D line
+1:
+ USER(	mcr	p15, 0, r0, c7, c10, 1	)	@ clean D line
 	add	r0, r0, #CACHE_LINE_SIZE
+2:
 	cmp	r0, r1
 	blo	1b
 #endif
@@ -142,6 +145,19 @@ ENTRY(v6_coherent_user_range)
 #endif
 	mov	pc, lr
 
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
+ENDPROC(v6_coherent_user_range)
+ENDPROC(v6_coherent_kern_range)
+
 /*
  *	v6_flush_kern_dcache_page(kaddr)
  *

arch/arm/mm/cache-v7.S

@@ -13,6 +13,7 @@
 #include <linux/linkage.h>
 #include <linux/init.h>
 #include <asm/assembler.h>
+#include <asm/unwind.h>
 
 #include "proc-macros.S"
 
@@ -153,13 +154,16 @@ ENTRY(v7_coherent_kern_range)
  *	- the Icache does not read data from the write buffer
  */
 ENTRY(v7_coherent_user_range)
+ UNWIND(.fnstart		)
 	dcache_line_size r2, r3
 	sub	r3, r2, #1
 	bic	r0, r0, r3
-1:	mcr	p15, 0, r0, c7, c11, 1		@ clean D line to the point of unification
+1:
+ USER(	mcr	p15, 0, r0, c7, c11, 1	)	@ clean D line to the point of unification
 	dsb
-	mcr	p15, 0, r0, c7, c5, 1		@ invalidate I line
+ USER(	mcr	p15, 0, r0, c7, c5, 1	)	@ invalidate I line
 	add	r0, r0, r2
+2:
 	cmp	r0, r1
 	blo	1b
 	mov	r0, #0
@@ -167,6 +171,17 @@ ENTRY(v7_coherent_user_range)
 	dsb
 	isb
 	mov	pc, lr
+
+/*
+ * Fault handling for the cache operation above. If the virtual address in r0
+ * isn't mapped, just try the next page.
+ */
+9001:
+	mov	r0, r0, lsr #12
+	mov	r0, r0, lsl #12
+	add	r0, r0, #4096
+	b	2b
+ UNWIND(.fnend		)
 ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
 

arch/arm/mm/fault-armv.c

@@ -153,14 +153,11 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 
 	page = pfn_to_page(pfn);
 	mapping = page_mapping(page);
-	if (mapping) {
 #ifndef CONFIG_SMP
-		int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
-
-		if (dirty)
-			__flush_dcache_page(mapping, page);
+	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
+		__flush_dcache_page(mapping, page);
 #endif
-
+	if (mapping) {
 		if (cache_is_vivt())
 			make_coherent(mapping, vma, addr, pfn);
 		else if (vma->vm_flags & VM_EXEC)

arch/arm/mm/fault.c

@@ -292,6 +292,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs)
 		 * down_read()
 		 */
 		might_sleep();
+#ifdef CONFIG_DEBUG_VM
+		if (!user_mode(regs) &&
+		    !search_exception_tables(regs->ARM_pc))
+			goto no_context;
+#endif
 	}
 
 	fault = __do_page_fault(mm, addr, fsr, tsk);

arch/arm/mm/highmem.c

@@ -46,6 +46,8 @@ void *kmap_atomic(struct page *page, enum km_type type)
 	if (!PageHighMem(page))
 		return page_address(page);
 
+	debug_kmap_atomic(type);
+
 	kmap = kmap_high_get(page);
 	if (kmap)
 		return kmap;

arch/arm/mm/init.c

@@ -483,7 +483,7 @@ free_memmap(int node, unsigned long start_pfn, unsigned long end_pfn)
 	/*
 	 * Convert start_pfn/end_pfn to a struct page pointer.
 	 */
-	start_pg = pfn_to_page(start_pfn);
+	start_pg = pfn_to_page(start_pfn - 1) + 1;
 	end_pg = pfn_to_page(end_pfn);
 
 	/*

arch/arm/plat-s3c24xx/adc.c

@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/sched.h>
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/clk.h>

arch/blackfin/ADI_BSD.txt

+This BSD-Style License applies to a few files in ./arch/blackfin directory,
+and is included here, so people understand which code they can use outside
+the Linux kernel, in non-GPL based projects.
+
+Using the files released under the "ADI BSD" license, must comply with
+these license terms.
+
+--------------------------------------------------------------------------
+
+Copyright Analog Devices, Inc.
+
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions
+are met:
+  - Redistributions of source code must retain the above copyright
+    notice, this list of conditions and the following disclaimer.
+  - Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in
+    the documentation and/or other materials provided with the
+    distribution.
+  - Neither the name of Analog Devices, Inc. nor the names of its
+    contributors may be used to endorse or promote products derived
+    from this software without specific prior written permission.
+  - The use of this software may or may not infringe the patent rights
+    of one or more patent holders.  This license does not release you
+    from the requirement that you obtain separate licenses from these
+    patent holders to use this software.
+
+THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR
+IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT,
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT,
+INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+BUT NOT LIMITED TO, INTELLECTUAL PROPERTY RIGHTS, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ADVISED OF THE POSSIBILITY OF SUCH DAMAGE

arch/blackfin/Kconfig

@@ -47,6 +47,9 @@ config GENERIC_HARDIRQS
 config GENERIC_IRQ_PROBE
 	def_bool y
 
+config GENERIC_HARDIRQS_NO__DO_IRQ
+	def_bool y
+
 config GENERIC_GPIO
 	def_bool y
 
@@ -229,7 +232,7 @@ endchoice
 
 config SMP
 	depends on BF561
-	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
 	bool "Symmetric multi-processing support"
 	---help---
 	  This enables support for systems with more than one CPU,
@@ -613,12 +616,10 @@ comment "Kernel Timer/Scheduler"
 source kernel/Kconfig.hz
 
 config GENERIC_TIME
-	bool "Generic time"
-	default y
+	def_bool y
 
 config GENERIC_CLOCKEVENTS
 	bool "Generic clock events"
-	depends on GENERIC_TIME
 	default y
 
 choice
@@ -653,6 +654,10 @@ config GPTMR0_CLOCKSOURCE
 	depends on GENERIC_CLOCKEVENTS
 	depends on !TICKSOURCE_GPTMR0
 
+config ARCH_USES_GETTIMEOFFSET
+	depends on !GENERIC_CLOCKEVENTS
+	def_bool y
+
 source kernel/time/Kconfig
 
 comment "Misc"

arch/blackfin/include/asm/atomic.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ARCH_BLACKFIN_ATOMIC__
 #define __ARCH_BLACKFIN_ATOMIC__
 

arch/blackfin/include/asm/bfin-global.h

 /*
- * File:         include/asm-blackfin/bfin-global.h
- * Based on:
- * Author: *
- * Created:
- * Description:  Global extern defines for blackfin
+ * Global extern defines for blackfin
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BFIN_GLOBAL_H_

arch/blackfin/include/asm/bfin5xx_spi.h

@@ -3,8 +3,6 @@
  *
  * Copyright 2004-2008 Analog Devices Inc.
  *
- * Enter bugs at http://blackfin.uclinux.org/
- *
  * Licensed under the GPL-2 or later.
  */
 

arch/blackfin/include/asm/bfin_rotary.h

 /*
  * board initialization should put one of these structures into platform_data
  * and place the bfin-rotary onto platform_bus named "bfin-rotary".
+ *
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BFIN_ROTARY_H

arch/blackfin/include/asm/bfin_simple_timer.h

+/*
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _bfin_simple_timer_h_
 #define _bfin_simple_timer_h_
 

arch/blackfin/include/asm/bitops.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_BITOPS_H
 #define _BLACKFIN_BITOPS_H
 

arch/blackfin/include/asm/blackfin.h

 /*
- * Common header file for blackfin family of processors.
+ * Common header file for Blackfin family of processors.
  *
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BLACKFIN_H_

arch/blackfin/include/asm/bug.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_BUG_H
 #define _BLACKFIN_BUG_H
 

arch/blackfin/include/asm/byteorder.h

-#ifndef _BLACKFIN_BYTEORDER_H
-#define _BLACKFIN_BYTEORDER_H
-
 #include <linux/byteorder/little_endian.h>
-
-#endif				/* _BLACKFIN_BYTEORDER_H */

arch/blackfin/include/asm/cache.h

 /*
- * include/asm-blackfin/cache.h
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
+
 #ifndef __ARCH_BLACKFIN_CACHE_H
 #define __ARCH_BLACKFIN_CACHE_H
 
@@ -35,10 +38,10 @@
 
 #if defined(CONFIG_SMP) && \
     !defined(CONFIG_BFIN_CACHE_COHERENT)
-# if defined(CONFIG_BFIN_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
+# if defined(CONFIG_BFIN_EXTMEM_ICACHEABLE) || defined(CONFIG_BFIN_L2_ICACHEABLE)
 # define __ARCH_SYNC_CORE_ICACHE
 # endif
-# if defined(CONFIG_BFIN_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
+# if defined(CONFIG_BFIN_EXTMEM_DCACHEABLE) || defined(CONFIG_BFIN_L2_DCACHEABLE)
 # define __ARCH_SYNC_CORE_DCACHE
 # endif
 #ifndef __ASSEMBLY__

arch/blackfin/include/asm/cacheflush.h

 /*
- * File:         include/asm-blackfin/cacheflush.h
- * Based on:	 include/asm-m68knommu/cacheflush.h
- * Author:       LG Soft India
- *               Copyright (C) 2004 Analog Devices Inc.
- * Created:      Tue Sep 21 2004
- * Description:  Blackfin low-level cache routines adapted from the i386
- * 		 and PPC versions by Greg Ungerer (gerg@snapgear.com)
+ * Blackfin low-level cache routines
  *
- * Modified:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BLACKFIN_CACHEFLUSH_H

arch/blackfin/include/asm/cdef_LPBlackfin.h

- /*
-  * File:        include/asm-blackfin/mach-common/cdef_LPBlackfin.h
-  * Based on:
-  * Author:      unknown
-  *              COPYRIGHT 2005 Analog Devices
-  * Created:     ?
-  * Description:
-  *
-  * Modified:
-  *
-  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2, or (at your option)
-  * any later version.
-  *
-  * This program is distributed in the hope that it will be useful,
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-  * along with this program; see the file COPYING.
-  * If not, write to the Free Software Foundation,
-  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-  */
+/*
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef _CDEF_LPBLACKFIN_H
 #define _CDEF_LPBLACKFIN_H

arch/blackfin/include/asm/checksum.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                     akbar.hussain@lineo.com
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_CHECKSUM_H
 #define _BFIN_CHECKSUM_H
 
 /*
- * MODIFIED FOR BFIN April 30, 2001 akbar.hussain@lineo.com
- *
  * computes the checksum of a memory block at buff, length len,
  * and adds in "sum" (32-bit)
  *

arch/blackfin/include/asm/clocks.h

 /*
- * File:         include/asm-blackfin/mach-common/clocks.h
- * Based on:     include/asm-blackfin/mach-bf537/bf537.h
- * Author:	 Robin Getz <rgetz@blackfin.uclinux.org>
+ * Common Clock definitions for various kernel files
  *
- * Created:      25Jul07
- * Description:  Common Clock definitions for various kernel files
+ * Copyright 2007-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BFIN_CLOCKS_H

arch/blackfin/include/asm/context.S

 /*
- * File:         arch/blackfin/kernel/context.S
- * Based on:
- * Author:
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 /*

arch/blackfin/include/asm/cplb.h

 /*
- * File:         include/asm-blackfin/cplb.h
- * Based on:     include/asm-blackfin/mach-bf537/bf537.h
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org>
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:      2000
- * Description:  Common CPLB definitions for CPLB init
- *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _CPLB_H

arch/blackfin/include/asm/cplbinit.h

 /*
- * File:         include/asm-blackfin/cplbinit.h
- * Based on:
- * Author:
+ * Common CPLB definitions for CPLB init
  *
- * Created:
- * Description:
+ * Copyright 2006-2008 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_CPLBINIT_H__

arch/blackfin/include/asm/cpu.h

 /*
- * File:         arch/blackfin/include/asm/cpu.h.
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_BLACKFIN_CPU_H

arch/blackfin/include/asm/def_LPBlackfin.h

- /*
-  * File:        include/asm-blackfin/mach-common/def_LPBlackfin.h
-  * Based on:
-  * Author:      unknown
-  *              COPYRIGHT 2005 Analog Devices
-  * Created:     ?
-  * Description:
-  *
-  * Modified:
-  *
-  * Bugs:         Enter bugs at http://blackfin.uclinux.org/
-  *
-  * This program is free software; you can redistribute it and/or modify
-  * it under the terms of the GNU General Public License as published by
-  * the Free Software Foundation; either version 2, or (at your option)
-  * any later version.
-  *
-  * This program is distributed in the hope that it will be useful,
-  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  * GNU General Public License for more details.
-  *
-  * You should have received a copy of the GNU General Public License
-  * along with this program; see the file COPYING.
-  * If not, write to the Free Software Foundation,
-  * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-  */
-
-/* LP Blackfin CORE REGISTER BIT & ADDRESS DEFINITIONS FOR ADSP-BF532/33 */
+/*
+ * Blackfin core register bit & address definitions
+ *
+ * Copyright 2005-2008 Analog Devices Inc.
+ *
+ * Licensed under the ADI BSD license or GPL-2 (or later).
+ */
 
 #ifndef _DEF_LPBLACKFIN_H
 #define _DEF_LPBLACKFIN_H

arch/blackfin/include/asm/dma-mapping.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_DMA_MAPPING_H
 #define _BLACKFIN_DMA_MAPPING_H
 

arch/blackfin/include/asm/dpmc.h

 /*
- * include/asm-blackfin/dpmc.h -  Miscellaneous IOCTL commands for Dynamic Power
- *   			 	Management Controller Driver.
+ * Miscellaneous IOCTL commands for Dynamic Power Management Controller Driver
+ *
  * Copyright (C) 2004-2008 Analog Device Inc.
  *
+ * Licensed under the GPL-2
  */
+
 #ifndef _BLACKFIN_DPMC_H_
 #define _BLACKFIN_DPMC_H_
 

arch/blackfin/include/asm/early_printk.h

 /*
- * File:         include/asm-blackfin/early_printk.h
- * Author:       Robin Getz <rgetz@blackfin.uclinux.org
+ * function prototpyes for early printk
  *
- * Created:      14Aug2007
- * Description:  function prototpyes for early printk
+ * Copyright 2007-2009 Analog Devices Inc.
  *
- * Modified:
- *               Copyright 2004-2007 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
+ * Licensed under the GPL-2 or later.
  */
 
-
 #ifndef __ASM_EARLY_PRINTK_H__
 #define __ASM_EARLY_PRINTK_H__
 

arch/blackfin/include/asm/elf.h

-/* Changes made by  LG Soft Oct 2004*/
+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef __ASMBFIN_ELF_H
 #define __ASMBFIN_ELF_H

arch/blackfin/include/asm/entry.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __BFIN_ENTRY_H
 #define __BFIN_ENTRY_H
 

arch/blackfin/include/asm/fcntl.h

+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_FCNTL_H
 #define _BFIN_FCNTL_H
 

arch/blackfin/include/asm/fixed_code.h

-/* This file defines the fixed addresses where userspace programs can find
-   atomic code sequences.  */
+/*
+ * This file defines the fixed addresses where userspace programs
+ * can find atomic code sequences.
+ *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifndef __BFIN_ASM_FIXED_CODE_H__
 #define __BFIN_ASM_FIXED_CODE_H__

arch/blackfin/include/asm/flat.h

 /*
- * include/asm-blackfin/flat.h -- uClinux flat-format executables
+ * uClinux flat-format executables
  *
- * Copyright (C) 2003,
+ * Copyright 2003-2009 Analog Devices Inc.
  *
+ * Licensed under the GPL-2
  */
 
 #ifndef __BLACKFIN_FLAT_H__

arch/blackfin/include/asm/gpio.h

 /*
- * File:         arch/blackfin/kernel/bfin_gpio.h
- * Based on:
- * Author:	 Michael Hennerich (hennerich@blackfin.uclinux.org)
+ * Copyright 2006-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2008 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ARCH_BLACKFIN_GPIO_H__

arch/blackfin/include/asm/hardirq.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __BFIN_HARDIRQ_H
 #define __BFIN_HARDIRQ_H
 

arch/blackfin/include/asm/io.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_IO_H
 #define _BFIN_IO_H
 

arch/blackfin/include/asm/irq.h

 /*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2003 HuTao
+ *                2002 Arcturus Networks Inc. (www.arcturusnetworks.com
+ *                       Ted Ma <mated@sympatico.ca>
  *
- * Changed by HuTao Apr18, 2003
- *
- * Copyright was missing when I got the code so took from MIPS arch ...MaTed---
- * Copyright (C) 1994 by Waldorf GMBH, written by Ralf Baechle
- * Copyright (C) 1995, 96, 97, 98, 99, 2000, 2001 by Ralf Baechle
- *
- * Adapted for BlackFin (ADI) by Ted Ma <mated@sympatico.ca>
- * Copyright (c) 2002 Arcturus Networks Inc. (www.arcturusnetworks.com)
- * Copyright (c) 2002 Lineo, Inc. <mattw@lineo.com>
+ * Licensed under the GPL-2
  */
 
 #ifndef _BFIN_IRQ_H_
@@ -19,6 +12,8 @@
 
 #include <linux/irqflags.h>
 
+#include <mach/anomaly.h>
+
 /* SYS_IRQS and NR_IRQS are defined in <mach-bf5xx/irq.h> */
 #include <mach/irq.h>
 

arch/blackfin/include/asm/irq_handler.h

+/*
+ * Copyright 2007-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _IRQ_HANDLER_H
 #define _IRQ_HANDLER_H
 

arch/blackfin/include/asm/l1layout.h

 /*
- * l1layout.h
  * Defines a layout of L1 scratchpad memory that userspace can rely on.
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _L1LAYOUT_H_

arch/blackfin/include/asm/linkage.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_LINKAGE_H
 #define __ASM_LINKAGE_H
 

arch/blackfin/include/asm/mmu.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *                2002 David McCullough <davidm@snapgear.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
 #ifndef __MMU_H
 #define __MMU_H
 
-/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
-
 struct sram_list_struct {
 	struct sram_list_struct *next;
 	void *addr;

arch/blackfin/include/asm/mmu_context.h

 /*
- * File:         include/asm-blackfin/mmu_context.h
- * Based on:
- * Author:
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * Created:
- * Description:
- *
- * Modified:
- *               Copyright 2004-2006 Analog Devices Inc.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __BLACKFIN_MMU_CONTEXT_H__

arch/blackfin/include/asm/module.h

+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _ASM_BFIN_MODULE_H
 #define _ASM_BFIN_MODULE_H
 

arch/blackfin/include/asm/mutex.h

@@ -4,6 +4,10 @@
  * TODO: implement optimized primitives instead, or leave the generic
  * implementation in place, or pick the atomic_xchg() based generic
  * implementation. (see asm-generic/mutex-xchg.h for details)
+ *
+ * Copyright 2006-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _ASM_MUTEX_H

arch/blackfin/include/asm/nand.h

-/* linux/include/asm-blackfin/nand.h
- *
- * Copyright (c) 2007 Analog Devices, Inc.
- *	Bryan Wu <bryan.wu@analog.com>
- *
+/*
  * BF5XX - NAND flash controller platfrom_device info
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright 2007-2008 Analog Devices, Inc.
+ *
+ * Licensed under the GPL-2
  */
 
 /* struct bf5xx_nand_platform

arch/blackfin/include/asm/page.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_PAGE_H
 #define _BLACKFIN_PAGE_H
 

arch/blackfin/include/asm/page_offset.h

-
-/* This handles the memory map.. */
+/*
+ * This handles the memory map
+ *
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
 
 #ifdef CONFIG_BLACKFIN
 #define PAGE_OFFSET_RAW		0x00000000

arch/blackfin/include/asm/pda.h

 /*
- * File:         arch/blackfin/include/asm/pda.h
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                         Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _ASM_BLACKFIN_PDA_H

arch/blackfin/include/asm/pgtable.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_PGTABLE_H
 #define _BLACKFIN_PGTABLE_H
 
@@ -92,6 +98,12 @@ extern unsigned int kobjsize(const void *objp);
 #define	VMALLOC_START	0
 #define	VMALLOC_END	0xffffffff
 
+/* provide a special get_unmapped_area for framebuffer mmaps of nommu */
+extern unsigned long get_fb_unmapped_area(struct file *filp, unsigned long,
+					  unsigned long, unsigned long,
+					  unsigned long);
+#define HAVE_ARCH_FB_UNMAPPED_AREA
+
 #include <asm-generic/pgtable.h>
 
 #endif				/* _BLACKFIN_PGTABLE_H */

arch/blackfin/include/asm/poll.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ */
+
 #ifndef __BFIN_POLL_H
 #define __BFIN_POLL_H
 

arch/blackfin/include/asm/portmux.h

 /*
- * Common header file for blackfin family of processors.
+ * Common header file for Blackfin family of processors
  *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _PORTMUX_H_

arch/blackfin/include/asm/posix_types.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ARCH_BFIN_POSIX_TYPES_H
 #define __ARCH_BFIN_POSIX_TYPES_H
 

arch/blackfin/include/asm/processor.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_BFIN_PROCESSOR_H
 #define __ASM_BFIN_PROCESSOR_H
 

arch/blackfin/include/asm/ptrace.h

+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_PTRACE_H
 #define _BFIN_PTRACE_H
 

arch/blackfin/include/asm/sections.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_SECTIONS_H
 #define _BLACKFIN_SECTIONS_H
 

arch/blackfin/include/asm/segment.h

+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_SEGMENT_H
 #define _BFIN_SEGMENT_H
 

arch/blackfin/include/asm/sigcontext.h

+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _ASM_BLACKFIN_SIGCONTEXT_H
 #define _ASM_BLACKFIN_SIGCONTEXT_H
 

arch/blackfin/include/asm/siginfo.h

+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BFIN_SIGINFO_H
 #define _BFIN_SIGINFO_H
 

arch/blackfin/include/asm/smp.h

 /*
- * File:         arch/blackfin/include/asm/smp.h
- * Author:       Philippe Gerum <rpm@xenomai.org>
+ * Copyright 2007-2009 Analog Devices Inc.
+ *                          Philippe Gerum <rpm@xenomai.org>
  *
- *               Copyright 2007 Analog Devices Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, see the file COPYING, or write
- * to the Free Software Foundation, Inc.,
- * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef __ASM_BLACKFIN_SMP_H

arch/blackfin/include/asm/spinlock.h

+/*
+ * Copyright 2004-2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __BFIN_SPINLOCK_H
 #define __BFIN_SPINLOCK_H
 

arch/blackfin/include/asm/spinlock_types.h

+/*
+ * Copyright 2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef __ASM_SPINLOCK_TYPES_H
 #define __ASM_SPINLOCK_TYPES_H
 

arch/blackfin/include/asm/stat.h

+/*
+ * Copyright 2004-2006 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2.
+ */
+
 #ifndef _BFIN_STAT_H
 #define _BFIN_STAT_H
 

arch/blackfin/include/asm/string.h

+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_STRING_H_
 #define _BLACKFIN_STRING_H_
 

arch/blackfin/include/asm/swab.h

+/*
+ * Copyright 2009 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_SWAB_H
 #define _BLACKFIN_SWAB_H
 

arch/blackfin/include/asm/system.h

 /*
- * File:        include/asm/system.h
- * Based on:
- * Author:      Tony Kou (tonyko@lineo.ca)
- *              Copyright (c) 2002 Arcturus Networks Inc.
- *                    (www.arcturusnetworks.com)
- *              Copyright (c) 2003 Metrowerks (www.metrowerks.com)
- *              Copyright (c) 2004 Analog Device Inc.
- * Created:     25Jan2001 - Tony Kou
- * Description: system.h include file
+ * Copyright 2004-2009 Analog Devices Inc.
+ *               Tony Kou (tonyko@lineo.ca)
  *
- * Modified:     22Sep2006 - Robin Getz
- *                - move include blackfin.h down, so I can get access to
- *                   irq functions in other include files.
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later
  */
 
 #ifndef _BLACKFIN_SYSTEM_H

arch/blackfin/include/asm/thread_info.h

 /*
- * File:         include/asm-blackfin/thread_info.h
- * Based on:     include/asm-m68knommu/thread_info.h
- * Author:       LG Soft India
- *               Copyright (C) 2004-2005 Analog Devices Inc.
- * Created:      Tue Sep 21 2004
- * Description:  Blackfin low-level thread information
- * Modified:
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ * Copyright 2004-2009 Analog Devices Inc.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _ASM_THREAD_INFO_H

arch/blackfin/include/asm/tlb.h

+/*
+ * Copyright 2004-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
 #ifndef _BLACKFIN_TLB_H
 #define _BLACKFIN_TLB_H
 

arch/blackfin/include/asm/trace.h

 /*
- * Common header file for blackfin family of processors.
+ * header file for hardware trace functions
  *
+ * Copyright 2007-2008 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
  */
 
 #ifndef _BLACKFIN_TRACE_

arch/blackfin/include/asm/traps.h

 /*
- *  linux/include/asm/traps.h
+ *  Copyright 2004-2009 Analog Devices Inc.
+ *                 2001 Lineo, Inc
+ *                        Tony Kou
+ *                 1993 Hamish Macdonald
  *
- *  Copyright (C) 1993        Hamish Macdonald
- *
- *  Lineo, Inc    Jul 2001    Tony Kou
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
+ * Licensed under the GPL-2
  */
 
 #ifndef _BFIN_TRAPS_H