Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 4 年多

通知 15
Star 8
Fork 2
K
kernel_linux
提交 9ced9f03 编写于 作者: R Russell King
浏览文件
操作

Merge branch 'for-rmk' of... 

Merge branch 'for-rmk' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into devel-stable

Conflicts:
	arch/arm/mm/Kconfig
上级 9b963f32 b0b6ff0b
展开全部 隐藏空白更改
内联 并排
Showing with 6308 addition and 1473 deletion
arch/arm/Kconfig
浏览文件 @ 9ced9f03
......@@ -715,7 +715,8 @@ config ARCH_S5P64X0
select GENERIC_GPIO
select HAVE_CLK
select HAVE_S3C2410_WATCHDOG if WATCHDOG
select ARCH_USES_GETTIMEOFFSET
select GENERIC_CLOCKEVENTS
select HAVE_SCHED_CLOCK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
help
......@@ -753,15 +754,16 @@ config ARCH_S5PV210
select HAVE_CLK
select ARM_L1_CACHE_SHIFT_6
select ARCH_HAS_CPUFREQ
select ARCH_USES_GETTIMEOFFSET
select GENERIC_CLOCKEVENTS
select HAVE_SCHED_CLOCK
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV210/S5PC110 series based systems
config ARCH_S5PV310
bool "Samsung S5PV310/S5PC210"
config ARCH_EXYNOS4
bool "Samsung EXYNOS4"
select CPU_V7
select ARCH_SPARSEMEM_ENABLE
select GENERIC_GPIO
......@@ -772,7 +774,7 @@ config ARCH_S5PV310
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C2410_WATCHDOG if WATCHDOG
help
Samsung S5PV310 series based systems
Samsung EXYNOS4 series based systems
config ARCH_SHARK
bool "Shark"
......@@ -991,7 +993,7 @@ source "arch/arm/mach-s5pc100/Kconfig"
source "arch/arm/mach-s5pv210/Kconfig"
source "arch/arm/mach-s5pv310/Kconfig"
source "arch/arm/mach-exynos4/Kconfig"
source "arch/arm/mach-shmobile/Kconfig"
......@@ -1278,7 +1280,7 @@ config SMP
depends on GENERIC_CLOCKEVENTS
depends on REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP || \
MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || \
ARCH_S5PV310 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
ARCH_EXYNOS4 || ARCH_TEGRA || ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || \
ARCH_MSM_SCORPIONMP || ARCH_SHMOBILE
select USE_GENERIC_SMP_HELPERS
select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP
......@@ -1366,7 +1368,7 @@ config LOCAL_TIMERS
bool "Use local timer interrupts"
depends on SMP
default y
select HAVE_ARM_TWD if !ARCH_MSM_SCORPIONMP
select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
help
Enable support for local timers on SMP platforms, rather then the
legacy IPI broadcast method. Local timers allows the system
......@@ -1378,7 +1380,7 @@ source kernel/Kconfig.preempt
config HZ
int
default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \
ARCH_S5P6442 || ARCH_S5PV210 || ARCH_S5PV310
ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4
default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER
default AT91_TIMER_HZ if ARCH_AT91
default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE
......
arch/arm/Makefile
浏览文件 @ 9ced9f03
......@@ -178,7 +178,7 @@ machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0
machine-$(CONFIG_ARCH_S5P6442) := s5p6442
machine-$(CONFIG_ARCH_S5PC100) := s5pc100
machine-$(CONFIG_ARCH_S5PV210) := s5pv210
machine-$(CONFIG_ARCH_S5PV310) := s5pv310
machine-$(CONFIG_ARCH_EXYNOS4) := exynos4
machine-$(CONFIG_ARCH_SA1100) := sa1100
machine-$(CONFIG_ARCH_SHARK) := shark
machine-$(CONFIG_ARCH_SHMOBILE) := shmobile
......
arch/arm/configs/exynos4_defconfig 0 → 100644
浏览文件 @ 9ced9f03
CONFIG_EXPERIMENTAL=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_KALLSYMS_ALL=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_EXYNOS4=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDKC210=y
CONFIG_MACH_SMDKV310=y
CONFIG_MACH_UNIVERSAL_C210=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_HOTPLUG_CPU=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M"
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_SAMSUNG=y
CONFIG_SERIAL_SAMSUNG_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_I2C=y
# CONFIG_HWMON is not set
# CONFIG_MFD_SUPPORT is not set
# CONFIG_HID_SUPPORT is not set
# CONFIG_USB_SUPPORT is not set
CONFIG_EXT2_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_CRAMFS=y
CONFIG_ROMFS_FS=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_BSD_DISKLABEL=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_INFO=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
CONFIG_DEBUG_LL=y
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_S3C_UART=1
CONFIG_CRC_CCITT=y
arch/arm/configs/s5p64x0_defconfig
浏览文件 @ 9ced9f03
......@@ -10,6 +10,8 @@ CONFIG_S3C_BOOT_ERROR_RESET=y
CONFIG_S3C_LOWLEVEL_UART_PORT=1
CONFIG_MACH_SMDK6440=y
CONFIG_MACH_SMDK6450=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_CPU_32v6K=y
CONFIG_AEABI=y
CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc"
......
arch/arm/configs/s5pv210_defconfig
浏览文件 @ 9ced9f03
......@@ -13,6 +13,8 @@ CONFIG_MACH_AQUILA=y
CONFIG_MACH_GONI=y
CONFIG_MACH_SMDKC110=y
CONFIG_MACH_SMDKV210=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
......
arch/arm/mach-s5pv310/Kconfig → arch/arm/mach-exynos4/Kconfig
浏览文件 @ 9ced9f03
# arch/arm/mach-s5pv310/Kconfig
# arch/arm/mach-exynos4/Kconfig
#
# Copyright (c) 2010 Samsung Electronics Co., Ltd.
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Licensed under GPLv2
# Configuration options for the S5PV310
# Configuration options for the EXYNOS4
if ARCH_S5PV310
if ARCH_EXYNOS4
config CPU_S5PV310
config CPU_EXYNOS4210
bool
select S3C_PL330_DMA
help
Enable S5PV310 CPU support
Enable EXYNOS4210 CPU support
config S5PV310_DEV_PD
config EXYNOS4_MCT
bool "Kernel timer support by MCT"
help
Use MCT (Multi Core Timer) as kernel timers
config EXYNOS4_DEV_PD
bool
help
Compile in platform device definitions for Power Domain
config S5PV310_SETUP_I2C1
config EXYNOS4_DEV_SYSMMU
bool
help
Common setup code for SYSTEM MMU in EXYNOS4
config EXYNOS4_SETUP_I2C1
bool
help
Common setup code for i2c bus 1.
config S5PV310_SETUP_I2C2
config EXYNOS4_SETUP_I2C2
bool
help
Common setup code for i2c bus 2.
config S5PV310_SETUP_I2C3
config EXYNOS4_SETUP_I2C3
bool
help
Common setup code for i2c bus 3.
config S5PV310_SETUP_I2C4
config EXYNOS4_SETUP_I2C4
bool
help
Common setup code for i2c bus 4.
config S5PV310_SETUP_I2C5
config EXYNOS4_SETUP_I2C5
bool
help
Common setup code for i2c bus 5.
config S5PV310_SETUP_I2C6
config EXYNOS4_SETUP_I2C6
bool
help
Common setup code for i2c bus 6.
config S5PV310_SETUP_I2C7
config EXYNOS4_SETUP_I2C7
bool
help
Common setup code for i2c bus 7.
config S5PV310_SETUP_SDHCI
config EXYNOS4_SETUP_KEYPAD
bool
select S5PV310_SETUP_SDHCI_GPIO
help
Internal helper functions for S5PV310 based SDHCI systems.
Common setup code for keypad.
config S5PV310_SETUP_SDHCI_GPIO
config EXYNOS4_SETUP_SDHCI
bool
select EXYNOS4_SETUP_SDHCI_GPIO
help
Internal helper functions for EXYNOS4 based SDHCI systems.
config EXYNOS4_SETUP_SDHCI_GPIO
bool
help
Common setup code for SDHCI gpio.
config S5PV310_DEV_SYSMMU
config EXYNOS4_SETUP_FIMC
bool
help
Common setup code for SYSTEM MMU in S5PV310
Common setup code for the camera interfaces.
# machine support
menu "S5PC210 Machines"
menu "EXYNOS4 Machines"
config MACH_SMDKC210
bool "SMDKC210"
select CPU_S5PV310
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
......@@ -85,48 +100,77 @@ config MACH_SMDKC210
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S5PV310_DEV_PD
select S5PV310_SETUP_I2C1
select S5PV310_SETUP_SDHCI
select S5PV310_DEV_SYSMMU
select EXYNOS4_DEV_PD
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung SMDKC210
S5PC210(MCP) is one of package option of S5PV310
config MACH_SMDKV310
bool "SMDKV310"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_I2C1
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select SAMSUNG_DEV_KEYPAD
select EXYNOS4_DEV_PD
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_KEYPAD
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung SMDKV310
config MACH_ARMLEX4210
bool "ARMLEX4210"
select CPU_EXYNOS4210
select S3C_DEV_RTC
select S3C_DEV_WDT
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select EXYNOS4_DEV_SYSMMU
select EXYNOS4_SETUP_SDHCI
select SATA_AHCI_PLATFORM
help
Machine support for Samsung ARMLEX4210 based on EXYNOS4210
config MACH_UNIVERSAL_C210
bool "Mobile UNIVERSAL_C210 Board"
select CPU_S5PV310
select S5P_DEV_ONENAND
select CPU_EXYNOS4210
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S5PV310_SETUP_SDHCI
select S3C_DEV_I2C1
select S5PV310_SETUP_I2C1
select S3C_DEV_I2C5
select S5P_DEV_ONENAND
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
help
Machine support for Samsung Mobile Universal S5PC210 Reference
Board. S5PC210(MCP) is one of package option of S5PV310
Board.
endmenu
menu "S5PV310 Machines"
config MACH_SMDKV310
bool "SMDKV310"
select CPU_S5PV310
select S3C_DEV_RTC
config MACH_NURI
bool "Mobile NURI Board"
select CPU_EXYNOS4210
select S3C_DEV_WDT
select S3C_DEV_I2C1
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
select S3C_DEV_HSMMC2
select S3C_DEV_HSMMC3
select S5PV310_DEV_PD
select S5PV310_DEV_SYSMMU
select S5PV310_SETUP_I2C1
select S5PV310_SETUP_SDHCI
select S3C_DEV_I2C1
select S3C_DEV_I2C5
select EXYNOS4_SETUP_I2C1
select EXYNOS4_SETUP_I2C5
select EXYNOS4_SETUP_SDHCI
select SAMSUNG_DEV_PWM
help
Machine support for Samsung SMDKV310
Machine support for Samsung Mobile NURI Board.
endmenu
......@@ -134,13 +178,13 @@ comment "Configuration for HSMMC bus width"
menu "Use 8-bit bus width"
config S5PV310_SDHCI_CH0_8BIT
config EXYNOS4_SDHCI_CH0_8BIT
bool "Channel 0 with 8-bit bus"
help
Support HSMMC Channel 0 8-bit bus.
If selected, Channel 1 is disabled.
config S5PV310_SDHCI_CH2_8BIT
config EXYNOS4_SDHCI_CH2_8BIT
bool "Channel 2 with 8-bit bus"
help
Support HSMMC Channel 2 8-bit bus.
......
arch/arm/mach-exynos4/Makefile 0 → 100644
浏览文件 @ 9ced9f03
# arch/arm/mach-exynos4/Makefile
#
# Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
# http://www.samsung.com/
#
# Licensed under GPLv2
obj-y :=
obj-m :=
obj-n :=
obj- :=
# Core support for EXYNOS4 system
obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
ifeq ($(CONFIG_EXYNOS4_MCT),y)
obj-y += mct.o
else
obj-y += time.o
obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o
endif
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
# machine support
obj-$(CONFIG_MACH_SMDKC210) += mach-smdkc210.o
obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
obj-$(CONFIG_MACH_NURI) += mach-nuri.o
# device support
obj-y += dev-audio.o
obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o
obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o
obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o
obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o
obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o
obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
obj-$(CONFIG_SATA_AHCI_PLATFORM) += dev-ahci.o
arch/arm/mach-s5pv310/cpu.c → arch/arm/mach-exynos4/cpu.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/cpu.c
/* linux/arch/arm/mach-exynos4/cpu.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -19,8 +19,10 @@
#include <plat/cpu.h>
#include <plat/clock.h>
#include <plat/s5pv310.h>
#include <plat/exynos4.h>
#include <plat/sdhci.h>
#include <plat/devs.h>
#include <plat/fimc-core.h>
#include <mach/regs-irq.h>
......@@ -29,55 +31,60 @@ extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
/* Initial IO mappings */
static struct map_desc s5pv310_iodesc[] __initdata = {
static struct map_desc exynos4_iodesc[] __initdata = {
{
.virtual = (unsigned long)S5P_VA_SYSTIMER,
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SYSRAM,
.pfn = __phys_to_pfn(S5PV310_PA_SYSRAM),
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSRAM),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(S5PV310_PA_CMU),
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.length = SZ_128K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_PMU,
.pfn = __phys_to_pfn(S5PV310_PA_PMU),
.pfn = __phys_to_pfn(EXYNOS4_PA_PMU),
.length = SZ_64K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_COMBINER_BASE,
.pfn = __phys_to_pfn(S5PV310_PA_COMBINER),
.pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_COREPERI_BASE,
.pfn = __phys_to_pfn(S5PV310_PA_COREPERI),
.pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
.length = SZ_8K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_L2CC,
.pfn = __phys_to_pfn(S5PV310_PA_L2CC),
.pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_GPIO1,
.pfn = __phys_to_pfn(S5PV310_PA_GPIO1),
.pfn = __phys_to_pfn(EXYNOS4_PA_GPIO1),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_GPIO2,
.pfn = __phys_to_pfn(S5PV310_PA_GPIO2),
.pfn = __phys_to_pfn(EXYNOS4_PA_GPIO2),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_GPIO3,
.pfn = __phys_to_pfn(S5PV310_PA_GPIO3),
.pfn = __phys_to_pfn(EXYNOS4_PA_GPIO3),
.length = SZ_256,
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_DMC0,
.pfn = __phys_to_pfn(S5PV310_PA_DMC0),
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
.length = SZ_4K,
.type = MT_DEVICE,
}, {
......@@ -87,13 +94,13 @@ static struct map_desc s5pv310_iodesc[] __initdata = {
.type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SROMC,
.pfn = __phys_to_pfn(S5PV310_PA_SROMC),
.pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
.length = SZ_4K,
.type = MT_DEVICE,
},
};
static void s5pv310_idle(void)
static void exynos4_idle(void)
{
if (!need_resched())
cpu_do_idle();
......@@ -101,32 +108,38 @@ static void s5pv310_idle(void)
local_irq_enable();
}
/* s5pv310_map_io
/*
* exynos4_map_io
*
* register the standard cpu IO areas
*/
void __init s5pv310_map_io(void)
*/
void __init exynos4_map_io(void)
{
iotable_init(s5pv310_iodesc, ARRAY_SIZE(s5pv310_iodesc));
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
/* initialize device information early */
s5pv310_default_sdhci0();
s5pv310_default_sdhci1();
s5pv310_default_sdhci2();
s5pv310_default_sdhci3();
exynos4_default_sdhci0();
exynos4_default_sdhci1();
exynos4_default_sdhci2();
exynos4_default_sdhci3();
s3c_fimc_setname(0, "exynos4-fimc");
s3c_fimc_setname(1, "exynos4-fimc");
s3c_fimc_setname(2, "exynos4-fimc");
s3c_fimc_setname(3, "exynos4-fimc");
}
void __init s5pv310_init_clocks(int xtal)
void __init exynos4_init_clocks(int xtal)
{
printk(KERN_DEBUG "%s: initializing clocks\n", __func__);
s3c24xx_register_baseclocks(xtal);
s5p_register_clocks(xtal);
s5pv310_register_clocks();
s5pv310_setup_clocks();
exynos4_register_clocks();
exynos4_setup_clocks();
}
void __init s5pv310_init_irq(void)
void __init exynos4_init_irq(void)
{
int irq;
......@@ -148,29 +161,29 @@ void __init s5pv310_init_irq(void)
}
/* The parameters of s5p_init_irq() are for VIC init.
* Theses parameters should be NULL and 0 because S5PV310
* Theses parameters should be NULL and 0 because EXYNOS4
* uses GIC instead of VIC.
*/
s5p_init_irq(NULL, 0);
}
struct sysdev_class s5pv310_sysclass = {
.name = "s5pv310-core",
struct sysdev_class exynos4_sysclass = {
.name = "exynos4-core",
};
static struct sys_device s5pv310_sysdev = {
.cls = &s5pv310_sysclass,
static struct sys_device exynos4_sysdev = {
.cls = &exynos4_sysclass,
};
static int __init s5pv310_core_init(void)
static int __init exynos4_core_init(void)
{
return sysdev_class_register(&s5pv310_sysclass);
return sysdev_class_register(&exynos4_sysclass);
}
core_initcall(s5pv310_core_init);
core_initcall(exynos4_core_init);
#ifdef CONFIG_CACHE_L2X0
static int __init s5pv310_l2x0_cache_init(void)
static int __init exynos4_l2x0_cache_init(void)
{
/* TAG, Data Latency Control: 2cycle */
__raw_writel(0x110, S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
......@@ -188,15 +201,15 @@ static int __init s5pv310_l2x0_cache_init(void)
return 0;
}
early_initcall(s5pv310_l2x0_cache_init);
early_initcall(exynos4_l2x0_cache_init);
#endif
int __init s5pv310_init(void)
int __init exynos4_init(void)
{
printk(KERN_INFO "S5PV310: Initializing architecture\n");
printk(KERN_INFO "EXYNOS4: Initializing architecture\n");
/* set idle function */
pm_idle = s5pv310_idle;
pm_idle = exynos4_idle;
return sysdev_register(&s5pv310_sysdev);
return sysdev_register(&exynos4_sysdev);
}
arch/arm/mach-s5pv310/cpufreq.c → arch/arm/mach-exynos4/cpufreq.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/cpufreq.c
/* linux/arch/arm/mach-exynos4/cpufreq.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - CPU frequency scaling support
* EXYNOS4 - CPU frequency scaling support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -31,15 +31,13 @@ static struct clk *moutcore;
static struct clk *mout_mpll;
static struct clk *mout_apll;
#ifdef CONFIG_REGULATOR
static struct regulator *arm_regulator;
static struct regulator *int_regulator;
#endif
static struct cpufreq_freqs freqs;
static unsigned int memtype;
enum s5pv310_memory_type {
enum exynos4_memory_type {
DDR2 = 4,
LPDDR2,
DDR3,
......@@ -49,7 +47,7 @@ enum cpufreq_level_index {
L0, L1, L2, L3, CPUFREQ_LEVEL_END,
};
static struct cpufreq_frequency_table s5pv310_freq_table[] = {
static struct cpufreq_frequency_table exynos4_freq_table[] = {
{L0, 1000*1000},
{L1, 800*1000},
{L2, 400*1000},
......@@ -160,7 +158,7 @@ struct cpufreq_voltage_table {
unsigned int int_volt;
};
static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = {
static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = {
{
.index = L0,
.arm_volt = 1200000,
......@@ -180,7 +178,7 @@ static struct cpufreq_voltage_table s5pv310_volt_table[CPUFREQ_LEVEL_END] = {
},
};
static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = {
static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = {
/* APLL FOUT L0: 1000MHz */
((250 << 16) | (6 << 8) | 1),
......@@ -194,17 +192,17 @@ static unsigned int s5pv310_apll_pms_table[CPUFREQ_LEVEL_END] = {
((200 << 16) | (6 << 8) | 4),
};
int s5pv310_verify_speed(struct cpufreq_policy *policy)
int exynos4_verify_speed(struct cpufreq_policy *policy)
{
return cpufreq_frequency_table_verify(policy, s5pv310_freq_table);
return cpufreq_frequency_table_verify(policy, exynos4_freq_table);
}
unsigned int s5pv310_getspeed(unsigned int cpu)
unsigned int exynos4_getspeed(unsigned int cpu)
{
return clk_get_rate(cpu_clk) / 1000;
}
void s5pv310_set_clkdiv(unsigned int div_index)
void exynos4_set_clkdiv(unsigned int div_index)
{
unsigned int tmp;
......@@ -321,7 +319,7 @@ void s5pv310_set_clkdiv(unsigned int div_index)
} while (tmp & 0x11);
}
static void s5pv310_set_apll(unsigned int index)
static void exynos4_set_apll(unsigned int index)
{
unsigned int tmp;
......@@ -340,7 +338,7 @@ static void s5pv310_set_apll(unsigned int index)
/* 3. Change PLL PMS values */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0));
tmp |= s5pv310_apll_pms_table[index];
tmp |= exynos4_apll_pms_table[index];
__raw_writel(tmp, S5P_APLL_CON0);
/* 4. wait_lock_time */
......@@ -357,99 +355,95 @@ static void s5pv310_set_apll(unsigned int index)
} while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT));
}
static void s5pv310_set_frequency(unsigned int old_index, unsigned int new_index)
static void exynos4_set_frequency(unsigned int old_index, unsigned int new_index)
{
unsigned int tmp;
if (old_index > new_index) {
/* The frequency changing to L0 needs to change apll */
if (freqs.new == s5pv310_freq_table[L0].frequency) {
if (freqs.new == exynos4_freq_table[L0].frequency) {
/* 1. Change the system clock divider values */
s5pv310_set_clkdiv(new_index);
exynos4_set_clkdiv(new_index);
/* 2. Change the apll m,p,s value */
s5pv310_set_apll(new_index);
exynos4_set_apll(new_index);
} else {
/* 1. Change the system clock divider values */
s5pv310_set_clkdiv(new_index);
exynos4_set_clkdiv(new_index);
/* 2. Change just s value in apll m,p,s value */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~(0x7 << 0);
tmp |= (s5pv310_apll_pms_table[new_index] & 0x7);
tmp |= (exynos4_apll_pms_table[new_index] & 0x7);
__raw_writel(tmp, S5P_APLL_CON0);
}
}
else if (old_index < new_index) {
/* The frequency changing from L0 needs to change apll */
if (freqs.old == s5pv310_freq_table[L0].frequency) {
if (freqs.old == exynos4_freq_table[L0].frequency) {
/* 1. Change the apll m,p,s value */
s5pv310_set_apll(new_index);
exynos4_set_apll(new_index);
/* 2. Change the system clock divider values */
s5pv310_set_clkdiv(new_index);
exynos4_set_clkdiv(new_index);
} else {
/* 1. Change just s value in apll m,p,s value */
tmp = __raw_readl(S5P_APLL_CON0);
tmp &= ~(0x7 << 0);
tmp |= (s5pv310_apll_pms_table[new_index] & 0x7);
tmp |= (exynos4_apll_pms_table[new_index] & 0x7);
__raw_writel(tmp, S5P_APLL_CON0);
/* 2. Change the system clock divider values */
s5pv310_set_clkdiv(new_index);
exynos4_set_clkdiv(new_index);
}
}
}
static int s5pv310_target(struct cpufreq_policy *policy,
static int exynos4_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int index, old_index;
unsigned int arm_volt, int_volt;
freqs.old = s5pv310_getspeed(policy->cpu);
freqs.old = exynos4_getspeed(policy->cpu);
if (cpufreq_frequency_table_target(policy, s5pv310_freq_table,
if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
freqs.old, relation, &old_index))
return -EINVAL;
if (cpufreq_frequency_table_target(policy, s5pv310_freq_table,
if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
target_freq, relation, &index))
return -EINVAL;
freqs.new = s5pv310_freq_table[index].frequency;
freqs.new = exynos4_freq_table[index].frequency;
freqs.cpu = policy->cpu;
if (freqs.new == freqs.old)
return 0;
/* get the voltage value */
arm_volt = s5pv310_volt_table[index].arm_volt;
int_volt = s5pv310_volt_table[index].int_volt;
arm_volt = exynos4_volt_table[index].arm_volt;
int_volt = exynos4_volt_table[index].int_volt;
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
/* control regulator */
if (freqs.new > freqs.old) {
/* Voltage up */
#ifdef CONFIG_REGULATOR
regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
regulator_set_voltage(int_regulator, int_volt, int_volt);
#endif
}
/* Clock Configuration Procedure */
s5pv310_set_frequency(old_index, index);
exynos4_set_frequency(old_index, index);
/* control regulator */
if (freqs.new < freqs.old) {
/* Voltage down */
#ifdef CONFIG_REGULATOR
regulator_set_voltage(arm_regulator, arm_volt, arm_volt);
regulator_set_voltage(int_regulator, int_volt, int_volt);
#endif
}
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
......@@ -458,52 +452,52 @@ static int s5pv310_target(struct cpufreq_policy *policy,
}
#ifdef CONFIG_PM
static int s5pv310_cpufreq_suspend(struct cpufreq_policy *policy,
static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy,
pm_message_t pmsg)
{
return 0;
}
static int s5pv310_cpufreq_resume(struct cpufreq_policy *policy)
static int exynos4_cpufreq_resume(struct cpufreq_policy *policy)
{
return 0;
}
#endif
static int s5pv310_cpufreq_cpu_init(struct cpufreq_policy *policy)
static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
policy->cur = policy->min = policy->max = s5pv310_getspeed(policy->cpu);
policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu);
cpufreq_frequency_table_get_attr(s5pv310_freq_table, policy->cpu);
cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
/* set the transition latency value */
policy->cpuinfo.transition_latency = 100000;
/*
* S5PV310 multi-core processors has 2 cores
* EXYNOS4 multi-core processors has 2 cores
* that the frequency cannot be set independently.
* Each cpu is bound to the same speed.
* So the affected cpu is all of the cpus.
*/
cpumask_setall(policy->cpus);
return cpufreq_frequency_table_cpuinfo(policy, s5pv310_freq_table);
return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
}
static struct cpufreq_driver s5pv310_driver = {
static struct cpufreq_driver exynos4_driver = {
.flags = CPUFREQ_STICKY,
.verify = s5pv310_verify_speed,
.target = s5pv310_target,
.get = s5pv310_getspeed,
.init = s5pv310_cpufreq_cpu_init,
.name = "s5pv310_cpufreq",
.verify = exynos4_verify_speed,
.target = exynos4_target,
.get = exynos4_getspeed,
.init = exynos4_cpufreq_cpu_init,
.name = "exynos4_cpufreq",
#ifdef CONFIG_PM
.suspend = s5pv310_cpufreq_suspend,
.resume = s5pv310_cpufreq_resume,
.suspend = exynos4_cpufreq_suspend,
.resume = exynos4_cpufreq_resume,
#endif
};
static int __init s5pv310_cpufreq_init(void)
static int __init exynos4_cpufreq_init(void)
{
cpu_clk = clk_get(NULL, "armclk");
if (IS_ERR(cpu_clk))
......@@ -521,7 +515,6 @@ static int __init s5pv310_cpufreq_init(void)
if (IS_ERR(mout_apll))
goto out;
#ifdef CONFIG_REGULATOR
arm_regulator = regulator_get(NULL, "vdd_arm");
if (IS_ERR(arm_regulator)) {
printk(KERN_ERR "failed to get resource %s\n", "vdd_arm");
......@@ -533,7 +526,6 @@ static int __init s5pv310_cpufreq_init(void)
printk(KERN_ERR "failed to get resource %s\n", "vdd_int");
goto out;
}
#endif
/*
* Check DRAM type.
......@@ -550,7 +542,7 @@ static int __init s5pv310_cpufreq_init(void)
printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype);
}
return cpufreq_register_driver(&s5pv310_driver);
return cpufreq_register_driver(&exynos4_driver);
out:
if (!IS_ERR(cpu_clk))
......@@ -565,16 +557,14 @@ static int __init s5pv310_cpufreq_init(void)
if (!IS_ERR(mout_apll))
clk_put(mout_apll);
#ifdef CONFIG_REGULATOR
if (!IS_ERR(arm_regulator))
regulator_put(arm_regulator);
if (!IS_ERR(int_regulator))
regulator_put(int_regulator);
#endif
printk(KERN_ERR "%s: failed initialization\n", __func__);
return -EINVAL;
}
late_initcall(s5pv310_cpufreq_init);
late_initcall(exynos4_cpufreq_init);
arch/arm/mach-exynos4/dev-ahci.c 0 → 100644
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-exynos4/dev-ahci.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - AHCI support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include <linux/ahci_platform.h>
#include <plat/cpu.h>
#include <mach/irqs.h>
#include <mach/map.h>
#include <mach/regs-pmu.h>
/* PHY Control Register */
#define SATA_CTRL0 0x0
/* PHY Link Control Register */
#define SATA_CTRL1 0x4
/* PHY Status Register */
#define SATA_PHY_STATUS 0x8
#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27)
#define SATA_CTRL0_SPEED_MODE (1 << 26)
#define SATA_CTRL0_M_PHY_CAL (1 << 19)
#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10)
#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9)
#define SATA_CTRL0_PHY_POR_N (1 << 8)
#define SATA_CTRL1_RST_PMALIVE_N (1 << 8)
#define SATA_CTRL1_RST_RXOOB_N (1 << 7)
#define SATA_CTRL1_RST_RX_N (1 << 6)
#define SATA_CTRL1_RST_TX_N (1 << 5)
#define SATA_PHY_STATUS_CMU_OK (1 << 18)
#define SATA_PHY_STATUS_LANE_OK (1 << 16)
#define LANE0 0x200
#define COM_LANE 0xA00
#define HOST_PORTS_IMPL 0xC
#define SCLK_SATA_FREQ (67 * MHZ)
static void __iomem *phy_base, *phy_ctrl;
struct phy_reg {
u8 reg;
u8 val;
};
/* SATA PHY setup */
static const struct phy_reg exynos4_sataphy_cmu[] = {
{ 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 },
{ 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 },
{ 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 },
{ 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 },
{ 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 },
{ 0x6b, 0xc8 }, { 0x6c, 0x06 },
};
static const struct phy_reg exynos4_sataphy_lane[] = {
{ 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 },
{ 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 },
{ 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e },
{ 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 },
{ 0x51, 0x0f },
};
static const struct phy_reg exynos4_sataphy_comlane[] = {
{ 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d },
{ 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 },
{ 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 },
{ 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 },
{ 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 },
{ 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 },
{ 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 },
{ 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d },
{ 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 },
{ 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 },
{ 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 },
{ 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff },
{ 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 },
{ 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 },
};
static int wait_for_phy_ready(void __iomem *reg, unsigned long bit)
{
unsigned long timeout;
/* wait for maximum of 3 sec */
timeout = jiffies + msecs_to_jiffies(3000);
while (!(__raw_readl(reg) & bit)) {
if (time_after(jiffies, timeout))
return -1;
cpu_relax();
}
return 0;
}
static int ahci_phy_init(void __iomem *mmio)
{
int i, ctrl0;
for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++)
__raw_writeb(exynos4_sataphy_cmu[i].val,
phy_base + (exynos4_sataphy_cmu[i].reg * 4));
for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++)
__raw_writeb(exynos4_sataphy_lane[i].val,
phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4);
for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++)
__raw_writeb(exynos4_sataphy_comlane[i].val,
phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4);
__raw_writeb(0x07, phy_base);
ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N;
__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
SATA_PHY_STATUS_CMU_OK) < 0) {
printk(KERN_ERR "PHY CMU not ready\n");
return -EBUSY;
}
__raw_writeb(0x03, phy_base + (COM_LANE * 4));
ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N;
__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
SATA_PHY_STATUS_LANE_OK) < 0) {
printk(KERN_ERR "PHY LANE not ready\n");
return -EBUSY;
}
ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
ctrl0 |= SATA_CTRL0_M_PHY_CAL;
__raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
return 0;
}
static int exynos4_ahci_init(struct device *dev, void __iomem *mmio)
{
struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata;
int val, ret;
phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K);
if (!phy_base) {
dev_err(dev, "failed to allocate memory for SATA PHY\n");
return -ENOMEM;
}
phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16);
if (!phy_ctrl) {
dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n");
ret = -ENOMEM;
goto err1;
}
clk_sata = clk_get(dev, "sata");
if (IS_ERR(clk_sata)) {
dev_err(dev, "failed to get sata clock\n");
ret = PTR_ERR(clk_sata);
clk_sata = NULL;
goto err2;
}
clk_enable(clk_sata);
clk_sataphy = clk_get(dev, "sataphy");
if (IS_ERR(clk_sataphy)) {
dev_err(dev, "failed to get sataphy clock\n");
ret = PTR_ERR(clk_sataphy);
clk_sataphy = NULL;
goto err3;
}
clk_enable(clk_sataphy);
clk_sclk_sata = clk_get(dev, "sclk_sata");
if (IS_ERR(clk_sclk_sata)) {
dev_err(dev, "failed to get sclk_sata\n");
ret = PTR_ERR(clk_sclk_sata);
clk_sclk_sata = NULL;
goto err4;
}
clk_enable(clk_sclk_sata);
clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ);
__raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL);
/* Enable PHY link control */
val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N |
SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N;
__raw_writel(val, phy_ctrl + SATA_CTRL1);
/* Set communication speed as 3Gbps and enable PHY power */
val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE |
SATA_CTRL0_PHY_POR_N;
__raw_writel(val, phy_ctrl + SATA_CTRL0);
/* Port0 is available */
__raw_writel(0x1, mmio + HOST_PORTS_IMPL);
return ahci_phy_init(mmio);
err4:
clk_disable(clk_sataphy);
clk_put(clk_sataphy);
err3:
clk_disable(clk_sata);
clk_put(clk_sata);
err2:
iounmap(phy_ctrl);
err1:
iounmap(phy_base);
return ret;
}
static struct ahci_platform_data exynos4_ahci_pdata = {
.init = exynos4_ahci_init,
};
static struct resource exynos4_ahci_resource[] = {
[0] = {
.start = EXYNOS4_PA_SATA,
.end = EXYNOS4_PA_SATA + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_SATA,
.end = IRQ_SATA,
.flags = IORESOURCE_IRQ,
},
};
static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);
struct platform_device exynos4_device_ahci = {
.name = "ahci",
.id = -1,
.resource = exynos4_ahci_resource,
.num_resources = ARRAY_SIZE(exynos4_ahci_resource),
.dev = {
.platform_data = &exynos4_ahci_pdata,
.dma_mask = &exynos4_ahci_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
arch/arm/mach-s5pv310/dev-audio.c → arch/arm/mach-exynos4/dev-audio.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/dev-audio.c
/* linux/arch/arm/mach-exynos4/dev-audio.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (c) 2010 Samsung Electronics Co. Ltd
* Jaswinder Singh <jassi.brar@samsung.com>
......@@ -24,18 +27,18 @@ static const char *rclksrc[] = {
[1] = "i2sclk",
};
static int s5pv310_cfg_i2s(struct platform_device *pdev)
static int exynos4_cfg_i2s(struct platform_device *pdev)
{
/* configure GPIO for i2s port */
switch (pdev->id) {
case 0:
s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 7, S3C_GPIO_SFN(2));
s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2));
break;
case 1:
s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(2));
s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2));
break;
case 2:
s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(4));
s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4));
break;
default:
printk(KERN_ERR "Invalid Device %d\n", pdev->id);
......@@ -46,7 +49,7 @@ static int s5pv310_cfg_i2s(struct platform_device *pdev)
}
static struct s3c_audio_pdata i2sv5_pdata = {
.cfg_gpio = s5pv310_cfg_i2s,
.cfg_gpio = exynos4_cfg_i2s,
.type = {
.i2s = {
.quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
......@@ -56,10 +59,10 @@ static struct s3c_audio_pdata i2sv5_pdata = {
},
};
static struct resource s5pv310_i2s0_resource[] = {
static struct resource exynos4_i2s0_resource[] = {
[0] = {
.start = S5PV310_PA_I2S0,
.end = S5PV310_PA_I2S0 + 0x100 - 1,
.start = EXYNOS4_PA_I2S0,
.end = EXYNOS4_PA_I2S0 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -79,11 +82,11 @@ static struct resource s5pv310_i2s0_resource[] = {
},
};
struct platform_device s5pv310_device_i2s0 = {
struct platform_device exynos4_device_i2s0 = {
.name = "samsung-i2s",
.id = 0,
.num_resources = ARRAY_SIZE(s5pv310_i2s0_resource),
.resource = s5pv310_i2s0_resource,
.num_resources = ARRAY_SIZE(exynos4_i2s0_resource),
.resource = exynos4_i2s0_resource,
.dev = {
.platform_data = &i2sv5_pdata,
},
......@@ -95,7 +98,7 @@ static const char *rclksrc_v3[] = {
};
static struct s3c_audio_pdata i2sv3_pdata = {
.cfg_gpio = s5pv310_cfg_i2s,
.cfg_gpio = exynos4_cfg_i2s,
.type = {
.i2s = {
.quirks = QUIRK_NO_MUXPSR,
......@@ -104,10 +107,10 @@ static struct s3c_audio_pdata i2sv3_pdata = {
},
};
static struct resource s5pv310_i2s1_resource[] = {
static struct resource exynos4_i2s1_resource[] = {
[0] = {
.start = S5PV310_PA_I2S1,
.end = S5PV310_PA_I2S1 + 0x100 - 1,
.start = EXYNOS4_PA_I2S1,
.end = EXYNOS4_PA_I2S1 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -122,20 +125,20 @@ static struct resource s5pv310_i2s1_resource[] = {
},
};
struct platform_device s5pv310_device_i2s1 = {
struct platform_device exynos4_device_i2s1 = {
.name = "samsung-i2s",
.id = 1,
.num_resources = ARRAY_SIZE(s5pv310_i2s1_resource),
.resource = s5pv310_i2s1_resource,
.num_resources = ARRAY_SIZE(exynos4_i2s1_resource),
.resource = exynos4_i2s1_resource,
.dev = {
.platform_data = &i2sv3_pdata,
},
};
static struct resource s5pv310_i2s2_resource[] = {
static struct resource exynos4_i2s2_resource[] = {
[0] = {
.start = S5PV310_PA_I2S2,
.end = S5PV310_PA_I2S2 + 0x100 - 1,
.start = EXYNOS4_PA_I2S2,
.end = EXYNOS4_PA_I2S2 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -150,11 +153,11 @@ static struct resource s5pv310_i2s2_resource[] = {
},
};
struct platform_device s5pv310_device_i2s2 = {
struct platform_device exynos4_device_i2s2 = {
.name = "samsung-i2s",
.id = 2,
.num_resources = ARRAY_SIZE(s5pv310_i2s2_resource),
.resource = s5pv310_i2s2_resource,
.num_resources = ARRAY_SIZE(exynos4_i2s2_resource),
.resource = exynos4_i2s2_resource,
.dev = {
.platform_data = &i2sv3_pdata,
},
......@@ -162,17 +165,17 @@ struct platform_device s5pv310_device_i2s2 = {
/* PCM Controller platform_devices */
static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev)
static int exynos4_pcm_cfg_gpio(struct platform_device *pdev)
{
switch (pdev->id) {
case 0:
s3c_gpio_cfgpin_range(S5PV310_GPZ(0), 5, S3C_GPIO_SFN(3));
s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3));
break;
case 1:
s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(3));
s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3));
break;
case 2:
s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 5, S3C_GPIO_SFN(3));
s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3));
break;
default:
printk(KERN_DEBUG "Invalid PCM Controller number!");
......@@ -183,13 +186,13 @@ static int s5pv310_pcm_cfg_gpio(struct platform_device *pdev)
}
static struct s3c_audio_pdata s3c_pcm_pdata = {
.cfg_gpio = s5pv310_pcm_cfg_gpio,
.cfg_gpio = exynos4_pcm_cfg_gpio,
};
static struct resource s5pv310_pcm0_resource[] = {
static struct resource exynos4_pcm0_resource[] = {
[0] = {
.start = S5PV310_PA_PCM0,
.end = S5PV310_PA_PCM0 + 0x100 - 1,
.start = EXYNOS4_PA_PCM0,
.end = EXYNOS4_PA_PCM0 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -204,20 +207,20 @@ static struct resource s5pv310_pcm0_resource[] = {
},
};
struct platform_device s5pv310_device_pcm0 = {
struct platform_device exynos4_device_pcm0 = {
.name = "samsung-pcm",
.id = 0,
.num_resources = ARRAY_SIZE(s5pv310_pcm0_resource),
.resource = s5pv310_pcm0_resource,
.num_resources = ARRAY_SIZE(exynos4_pcm0_resource),
.resource = exynos4_pcm0_resource,
.dev = {
.platform_data = &s3c_pcm_pdata,
},
};
static struct resource s5pv310_pcm1_resource[] = {
static struct resource exynos4_pcm1_resource[] = {
[0] = {
.start = S5PV310_PA_PCM1,
.end = S5PV310_PA_PCM1 + 0x100 - 1,
.start = EXYNOS4_PA_PCM1,
.end = EXYNOS4_PA_PCM1 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -232,20 +235,20 @@ static struct resource s5pv310_pcm1_resource[] = {
},
};
struct platform_device s5pv310_device_pcm1 = {
struct platform_device exynos4_device_pcm1 = {
.name = "samsung-pcm",
.id = 1,
.num_resources = ARRAY_SIZE(s5pv310_pcm1_resource),
.resource = s5pv310_pcm1_resource,
.num_resources = ARRAY_SIZE(exynos4_pcm1_resource),
.resource = exynos4_pcm1_resource,
.dev = {
.platform_data = &s3c_pcm_pdata,
},
};
static struct resource s5pv310_pcm2_resource[] = {
static struct resource exynos4_pcm2_resource[] = {
[0] = {
.start = S5PV310_PA_PCM2,
.end = S5PV310_PA_PCM2 + 0x100 - 1,
.start = EXYNOS4_PA_PCM2,
.end = EXYNOS4_PA_PCM2 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -260,11 +263,11 @@ static struct resource s5pv310_pcm2_resource[] = {
},
};
struct platform_device s5pv310_device_pcm2 = {
struct platform_device exynos4_device_pcm2 = {
.name = "samsung-pcm",
.id = 2,
.num_resources = ARRAY_SIZE(s5pv310_pcm2_resource),
.resource = s5pv310_pcm2_resource,
.num_resources = ARRAY_SIZE(exynos4_pcm2_resource),
.resource = exynos4_pcm2_resource,
.dev = {
.platform_data = &s3c_pcm_pdata,
},
......@@ -272,15 +275,15 @@ struct platform_device s5pv310_device_pcm2 = {
/* AC97 Controller platform devices */
static int s5pv310_ac97_cfg_gpio(struct platform_device *pdev)
static int exynos4_ac97_cfg_gpio(struct platform_device *pdev)
{
return s3c_gpio_cfgpin_range(S5PV310_GPC0(0), 5, S3C_GPIO_SFN(4));
return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4));
}
static struct resource s5pv310_ac97_resource[] = {
static struct resource exynos4_ac97_resource[] = {
[0] = {
.start = S5PV310_PA_AC97,
.end = S5PV310_PA_AC97 + 0x100 - 1,
.start = EXYNOS4_PA_AC97,
.end = EXYNOS4_PA_AC97 + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -306,36 +309,36 @@ static struct resource s5pv310_ac97_resource[] = {
};
static struct s3c_audio_pdata s3c_ac97_pdata = {
.cfg_gpio = s5pv310_ac97_cfg_gpio,
.cfg_gpio = exynos4_ac97_cfg_gpio,
};
static u64 s5pv310_ac97_dmamask = DMA_BIT_MASK(32);
static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32);
struct platform_device s5pv310_device_ac97 = {
struct platform_device exynos4_device_ac97 = {
.name = "samsung-ac97",
.id = -1,
.num_resources = ARRAY_SIZE(s5pv310_ac97_resource),
.resource = s5pv310_ac97_resource,
.num_resources = ARRAY_SIZE(exynos4_ac97_resource),
.resource = exynos4_ac97_resource,
.dev = {
.platform_data = &s3c_ac97_pdata,
.dma_mask = &s5pv310_ac97_dmamask,
.dma_mask = &exynos4_ac97_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
/* S/PDIF Controller platform_device */
static int s5pv310_spdif_cfg_gpio(struct platform_device *pdev)
static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
{
s3c_gpio_cfgpin_range(S5PV310_GPC1(0), 2, S3C_GPIO_SFN(3));
s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(3));
return 0;
}
static struct resource s5pv310_spdif_resource[] = {
static struct resource exynos4_spdif_resource[] = {
[0] = {
.start = S5PV310_PA_SPDIF,
.end = S5PV310_PA_SPDIF + 0x100 - 1,
.start = EXYNOS4_PA_SPDIF,
.end = EXYNOS4_PA_SPDIF + 0x100 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -346,19 +349,19 @@ static struct resource s5pv310_spdif_resource[] = {
};
static struct s3c_audio_pdata samsung_spdif_pdata = {
.cfg_gpio = s5pv310_spdif_cfg_gpio,
.cfg_gpio = exynos4_spdif_cfg_gpio,
};
static u64 s5pv310_spdif_dmamask = DMA_BIT_MASK(32);
static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32);
struct platform_device s5pv310_device_spdif = {
struct platform_device exynos4_device_spdif = {
.name = "samsung-spdif",
.id = -1,
.num_resources = ARRAY_SIZE(s5pv310_spdif_resource),
.resource = s5pv310_spdif_resource,
.num_resources = ARRAY_SIZE(exynos4_spdif_resource),
.resource = exynos4_spdif_resource,
.dev = {
.platform_data = &samsung_spdif_pdata,
.dma_mask = &s5pv310_spdif_dmamask,
.dma_mask = &exynos4_spdif_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
arch/arm/mach-s5pv310/dev-pd.c → arch/arm/mach-exynos4/dev-pd.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/dev-pd.c
/* linux/arch/arm/mach-exynos4/dev-pd.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - Power Domain support
* EXYNOS4 - Power Domain support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -19,7 +19,7 @@
#include <plat/pd.h>
static int s5pv310_pd_enable(struct device *dev)
static int exynos4_pd_enable(struct device *dev)
{
struct samsung_pd_info *pdata = dev->platform_data;
u32 timeout;
......@@ -42,7 +42,7 @@ static int s5pv310_pd_enable(struct device *dev)
return 0;
}
static int s5pv310_pd_disable(struct device *dev)
static int exynos4_pd_disable(struct device *dev)
{
struct samsung_pd_info *pdata = dev->platform_data;
u32 timeout;
......@@ -64,14 +64,14 @@ static int s5pv310_pd_disable(struct device *dev)
return 0;
}
struct platform_device s5pv310_device_pd[] = {
struct platform_device exynos4_device_pd[] = {
{
.name = "samsung-pd",
.id = 0,
.dev = {
.platform_data = &(struct samsung_pd_info) {
.enable = s5pv310_pd_enable,
.disable = s5pv310_pd_disable,
.enable = exynos4_pd_enable,
.disable = exynos4_pd_disable,
.base = S5P_PMU_MFC_CONF,
},
},
......@@ -80,8 +80,8 @@ struct platform_device s5pv310_device_pd[] = {
.id = 1,
.dev = {
.platform_data = &(struct samsung_pd_info) {
.enable = s5pv310_pd_enable,
.disable = s5pv310_pd_disable,
.enable = exynos4_pd_enable,
.disable = exynos4_pd_disable,
.base = S5P_PMU_G3D_CONF,
},
},
......@@ -90,8 +90,8 @@ struct platform_device s5pv310_device_pd[] = {
.id = 2,
.dev = {
.platform_data = &(struct samsung_pd_info) {
.enable = s5pv310_pd_enable,
.disable = s5pv310_pd_disable,
.enable = exynos4_pd_enable,
.disable = exynos4_pd_disable,
.base = S5P_PMU_LCD0_CONF,
},
},
......@@ -100,8 +100,8 @@ struct platform_device s5pv310_device_pd[] = {
.id = 3,
.dev = {
.platform_data = &(struct samsung_pd_info) {
.enable = s5pv310_pd_enable,
.disable = s5pv310_pd_disable,
.enable = exynos4_pd_enable,
.disable = exynos4_pd_disable,
.base = S5P_PMU_LCD1_CONF,
},
},
......@@ -110,8 +110,8 @@ struct platform_device s5pv310_device_pd[] = {
.id = 4,
.dev = {
.platform_data = &(struct samsung_pd_info) {
.enable = s5pv310_pd_enable,
.disable = s5pv310_pd_disable,
.enable = exynos4_pd_enable,
.disable = exynos4_pd_disable,
.base = S5P_PMU_TV_CONF,
},
},
......@@ -120,8 +120,8 @@ struct platform_device s5pv310_device_pd[] = {
.id = 5,
.dev = {
.platform_data = &(struct samsung_pd_info) {
.enable = s5pv310_pd_enable,
.disable = s5pv310_pd_disable,
.enable = exynos4_pd_enable,
.disable = exynos4_pd_disable,
.base = S5P_PMU_CAM_CONF,
},
},
......@@ -130,8 +130,8 @@ struct platform_device s5pv310_device_pd[] = {
.id = 6,
.dev = {
.platform_data = &(struct samsung_pd_info) {
.enable = s5pv310_pd_enable,
.disable = s5pv310_pd_disable,
.enable = exynos4_pd_enable,
.disable = exynos4_pd_disable,
.base = S5P_PMU_GPS_CONF,
},
},
......
arch/arm/mach-s5pv310/dev-sysmmu.c → arch/arm/mach-exynos4/dev-sysmmu.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/dev-sysmmu.c
/* linux/arch/arm/mach-exynos4/dev-sysmmu.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - System MMU support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
......@@ -13,11 +15,33 @@
#include <mach/map.h>
#include <mach/irqs.h>
#include <mach/sysmmu.h>
#include <plat/s5p-clock.h>
/* These names must be equal to the clock names in mach-exynos4/clock.c */
const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM] = {
"SYSMMU_MDMA" ,
"SYSMMU_SSS" ,
"SYSMMU_FIMC0" ,
"SYSMMU_FIMC1" ,
"SYSMMU_FIMC2" ,
"SYSMMU_FIMC3" ,
"SYSMMU_JPEG" ,
"SYSMMU_FIMD0" ,
"SYSMMU_FIMD1" ,
"SYSMMU_PCIe" ,
"SYSMMU_G2D" ,
"SYSMMU_ROTATOR",
"SYSMMU_MDMA2" ,
"SYSMMU_TV" ,
"SYSMMU_MFC_L" ,
"SYSMMU_MFC_R" ,
};
static struct resource s5pv310_sysmmu_resource[] = {
static struct resource exynos4_sysmmu_resource[] = {
[0] = {
.start = S5PV310_PA_SYSMMU_MDMA,
.end = S5PV310_PA_SYSMMU_MDMA + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_MDMA,
.end = EXYNOS4_PA_SYSMMU_MDMA + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -26,8 +50,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[2] = {
.start = S5PV310_PA_SYSMMU_SSS,
.end = S5PV310_PA_SYSMMU_SSS + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_SSS,
.end = EXYNOS4_PA_SYSMMU_SSS + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[3] = {
......@@ -36,8 +60,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[4] = {
.start = S5PV310_PA_SYSMMU_FIMC0,
.end = S5PV310_PA_SYSMMU_FIMC0 + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_FIMC0,
.end = EXYNOS4_PA_SYSMMU_FIMC0 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[5] = {
......@@ -46,8 +70,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[6] = {
.start = S5PV310_PA_SYSMMU_FIMC1,
.end = S5PV310_PA_SYSMMU_FIMC1 + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_FIMC1,
.end = EXYNOS4_PA_SYSMMU_FIMC1 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[7] = {
......@@ -56,8 +80,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[8] = {
.start = S5PV310_PA_SYSMMU_FIMC2,
.end = S5PV310_PA_SYSMMU_FIMC2 + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_FIMC2,
.end = EXYNOS4_PA_SYSMMU_FIMC2 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[9] = {
......@@ -66,8 +90,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[10] = {
.start = S5PV310_PA_SYSMMU_FIMC3,
.end = S5PV310_PA_SYSMMU_FIMC3 + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_FIMC3,
.end = EXYNOS4_PA_SYSMMU_FIMC3 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[11] = {
......@@ -76,8 +100,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[12] = {
.start = S5PV310_PA_SYSMMU_JPEG,
.end = S5PV310_PA_SYSMMU_JPEG + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_JPEG,
.end = EXYNOS4_PA_SYSMMU_JPEG + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[13] = {
......@@ -86,8 +110,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[14] = {
.start = S5PV310_PA_SYSMMU_FIMD0,
.end = S5PV310_PA_SYSMMU_FIMD0 + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_FIMD0,
.end = EXYNOS4_PA_SYSMMU_FIMD0 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[15] = {
......@@ -96,8 +120,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[16] = {
.start = S5PV310_PA_SYSMMU_FIMD1,
.end = S5PV310_PA_SYSMMU_FIMD1 + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_FIMD1,
.end = EXYNOS4_PA_SYSMMU_FIMD1 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[17] = {
......@@ -106,8 +130,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[18] = {
.start = S5PV310_PA_SYSMMU_PCIe,
.end = S5PV310_PA_SYSMMU_PCIe + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_PCIe,
.end = EXYNOS4_PA_SYSMMU_PCIe + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[19] = {
......@@ -116,8 +140,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[20] = {
.start = S5PV310_PA_SYSMMU_G2D,
.end = S5PV310_PA_SYSMMU_G2D + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_G2D,
.end = EXYNOS4_PA_SYSMMU_G2D + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[21] = {
......@@ -126,8 +150,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[22] = {
.start = S5PV310_PA_SYSMMU_ROTATOR,
.end = S5PV310_PA_SYSMMU_ROTATOR + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_ROTATOR,
.end = EXYNOS4_PA_SYSMMU_ROTATOR + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[23] = {
......@@ -136,8 +160,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[24] = {
.start = S5PV310_PA_SYSMMU_MDMA2,
.end = S5PV310_PA_SYSMMU_MDMA2 + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_MDMA2,
.end = EXYNOS4_PA_SYSMMU_MDMA2 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[25] = {
......@@ -146,8 +170,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[26] = {
.start = S5PV310_PA_SYSMMU_TV,
.end = S5PV310_PA_SYSMMU_TV + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_TV,
.end = EXYNOS4_PA_SYSMMU_TV + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[27] = {
......@@ -156,8 +180,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[28] = {
.start = S5PV310_PA_SYSMMU_MFC_L,
.end = S5PV310_PA_SYSMMU_MFC_L + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_MFC_L,
.end = EXYNOS4_PA_SYSMMU_MFC_L + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[29] = {
......@@ -166,8 +190,8 @@ static struct resource s5pv310_sysmmu_resource[] = {
.flags = IORESOURCE_IRQ,
},
[30] = {
.start = S5PV310_PA_SYSMMU_MFC_R,
.end = S5PV310_PA_SYSMMU_MFC_R + SZ_64K - 1,
.start = EXYNOS4_PA_SYSMMU_MFC_R,
.end = EXYNOS4_PA_SYSMMU_MFC_R + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[31] = {
......@@ -177,11 +201,32 @@ static struct resource s5pv310_sysmmu_resource[] = {
},
};
struct platform_device s5pv310_device_sysmmu = {
struct platform_device exynos4_device_sysmmu = {
.name = "s5p-sysmmu",
.id = 32,
.num_resources = ARRAY_SIZE(s5pv310_sysmmu_resource),
.resource = s5pv310_sysmmu_resource,
.num_resources = ARRAY_SIZE(exynos4_sysmmu_resource),
.resource = exynos4_sysmmu_resource,
};
EXPORT_SYMBOL(exynos4_device_sysmmu);
static struct clk *sysmmu_clk[S5P_SYSMMU_TOTAL_IPNUM];
void sysmmu_clk_init(struct device *dev, sysmmu_ips ips)
{
sysmmu_clk[ips] = clk_get(dev, sysmmu_ips_name[ips]);
if (IS_ERR(sysmmu_clk[ips]))
sysmmu_clk[ips] = NULL;
else
clk_put(sysmmu_clk[ips]);
}
void sysmmu_clk_enable(sysmmu_ips ips)
{
if (sysmmu_clk[ips])
clk_enable(sysmmu_clk[ips]);
}
EXPORT_SYMBOL(s5pv310_device_sysmmu);
void sysmmu_clk_disable(sysmmu_ips ips)
{
if (sysmmu_clk[ips])
clk_disable(sysmmu_clk[ips]);
}
arch/arm/mach-s5pv310/dma.c → arch/arm/mach-exynos4/dma.c
浏览文件 @ 9ced9f03
/*
/* linux/arch/arm/mach-exynos4/dma.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (C) 2010 Samsung Electronics Co. Ltd.
* Jaswinder Singh <jassi.brar@samsung.com>
*
......@@ -30,10 +34,10 @@
static u64 dma_dmamask = DMA_BIT_MASK(32);
static struct resource s5pv310_pdma0_resource[] = {
static struct resource exynos4_pdma0_resource[] = {
[0] = {
.start = S5PV310_PA_PDMA0,
.end = S5PV310_PA_PDMA0 + SZ_4K,
.start = EXYNOS4_PA_PDMA0,
.end = EXYNOS4_PA_PDMA0 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -43,7 +47,7 @@ static struct resource s5pv310_pdma0_resource[] = {
},
};
static struct s3c_pl330_platdata s5pv310_pdma0_pdata = {
static struct s3c_pl330_platdata exynos4_pdma0_pdata = {
.peri = {
[0] = DMACH_PCM0_RX,
[1] = DMACH_PCM0_TX,
......@@ -80,22 +84,22 @@ static struct s3c_pl330_platdata s5pv310_pdma0_pdata = {
},
};
static struct platform_device s5pv310_device_pdma0 = {
static struct platform_device exynos4_device_pdma0 = {
.name = "s3c-pl330",
.id = 0,
.num_resources = ARRAY_SIZE(s5pv310_pdma0_resource),
.resource = s5pv310_pdma0_resource,
.num_resources = ARRAY_SIZE(exynos4_pdma0_resource),
.resource = exynos4_pdma0_resource,
.dev = {
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv310_pdma0_pdata,
.platform_data = &exynos4_pdma0_pdata,
},
};
static struct resource s5pv310_pdma1_resource[] = {
static struct resource exynos4_pdma1_resource[] = {
[0] = {
.start = S5PV310_PA_PDMA1,
.end = S5PV310_PA_PDMA1 + SZ_4K,
.start = EXYNOS4_PA_PDMA1,
.end = EXYNOS4_PA_PDMA1 + SZ_4K,
.flags = IORESOURCE_MEM,
},
[1] = {
......@@ -105,7 +109,7 @@ static struct resource s5pv310_pdma1_resource[] = {
},
};
static struct s3c_pl330_platdata s5pv310_pdma1_pdata = {
static struct s3c_pl330_platdata exynos4_pdma1_pdata = {
.peri = {
[0] = DMACH_PCM0_RX,
[1] = DMACH_PCM0_TX,
......@@ -142,27 +146,27 @@ static struct s3c_pl330_platdata s5pv310_pdma1_pdata = {
},
};
static struct platform_device s5pv310_device_pdma1 = {
static struct platform_device exynos4_device_pdma1 = {
.name = "s3c-pl330",
.id = 1,
.num_resources = ARRAY_SIZE(s5pv310_pdma1_resource),
.resource = s5pv310_pdma1_resource,
.num_resources = ARRAY_SIZE(exynos4_pdma1_resource),
.resource = exynos4_pdma1_resource,
.dev = {
.dma_mask = &dma_dmamask,
.coherent_dma_mask = DMA_BIT_MASK(32),
.platform_data = &s5pv310_pdma1_pdata,
.platform_data = &exynos4_pdma1_pdata,
},
};
static struct platform_device *s5pv310_dmacs[] __initdata = {
&s5pv310_device_pdma0,
&s5pv310_device_pdma1,
static struct platform_device *exynos4_dmacs[] __initdata = {
&exynos4_device_pdma0,
&exynos4_device_pdma1,
};
static int __init s5pv310_dma_init(void)
static int __init exynos4_dma_init(void)
{
platform_add_devices(s5pv310_dmacs, ARRAY_SIZE(s5pv310_dmacs));
platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs));
return 0;
}
arch_initcall(s5pv310_dma_init);
arch_initcall(exynos4_dma_init);
arch/arm/mach-s5pv310/gpiolib.c → arch/arm/mach-exynos4/gpiolib.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/gpiolib.c
/* linux/arch/arm/mach-exynos4/gpiolib.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - GPIOlib support
* EXYNOS4 - GPIOlib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -43,168 +43,217 @@ static struct s3c_gpio_cfg gpio_cfg_noint = {
* Note: The initialization of 'base' member of s3c_gpio_chip structure
* uses the above macro and depends on the banks being listed in order here.
*/
static struct s3c_gpio_chip s5pv310_gpio_part1_4bit[] = {
static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
{
.chip = {
.base = S5PV310_GPA0(0),
.ngpio = S5PV310_GPIO_A0_NR,
.base = EXYNOS4_GPA0(0),
.ngpio = EXYNOS4_GPIO_A0_NR,
.label = "GPA0",
},
}, {
.chip = {
.base = S5PV310_GPA1(0),
.ngpio = S5PV310_GPIO_A1_NR,
.base = EXYNOS4_GPA1(0),
.ngpio = EXYNOS4_GPIO_A1_NR,
.label = "GPA1",
},
}, {
.chip = {
.base = S5PV310_GPB(0),
.ngpio = S5PV310_GPIO_B_NR,
.base = EXYNOS4_GPB(0),
.ngpio = EXYNOS4_GPIO_B_NR,
.label = "GPB",
},
}, {
.chip = {
.base = S5PV310_GPC0(0),
.ngpio = S5PV310_GPIO_C0_NR,
.base = EXYNOS4_GPC0(0),
.ngpio = EXYNOS4_GPIO_C0_NR,
.label = "GPC0",
},
}, {
.chip = {
.base = S5PV310_GPC1(0),
.ngpio = S5PV310_GPIO_C1_NR,
.base = EXYNOS4_GPC1(0),
.ngpio = EXYNOS4_GPIO_C1_NR,
.label = "GPC1",
},
}, {
.chip = {
.base = S5PV310_GPD0(0),
.ngpio = S5PV310_GPIO_D0_NR,
.base = EXYNOS4_GPD0(0),
.ngpio = EXYNOS4_GPIO_D0_NR,
.label = "GPD0",
},
}, {
.chip = {
.base = S5PV310_GPD1(0),
.ngpio = S5PV310_GPIO_D1_NR,
.base = EXYNOS4_GPD1(0),
.ngpio = EXYNOS4_GPIO_D1_NR,
.label = "GPD1",
},
}, {
.chip = {
.base = S5PV310_GPE0(0),
.ngpio = S5PV310_GPIO_E0_NR,
.base = EXYNOS4_GPE0(0),
.ngpio = EXYNOS4_GPIO_E0_NR,
.label = "GPE0",
},
}, {
.chip = {
.base = S5PV310_GPE1(0),
.ngpio = S5PV310_GPIO_E1_NR,
.base = EXYNOS4_GPE1(0),
.ngpio = EXYNOS4_GPIO_E1_NR,
.label = "GPE1",
},
}, {
.chip = {
.base = S5PV310_GPE2(0),
.ngpio = S5PV310_GPIO_E2_NR,
.base = EXYNOS4_GPE2(0),
.ngpio = EXYNOS4_GPIO_E2_NR,
.label = "GPE2",
},
}, {
.chip = {
.base = S5PV310_GPE3(0),
.ngpio = S5PV310_GPIO_E3_NR,
.base = EXYNOS4_GPE3(0),
.ngpio = EXYNOS4_GPIO_E3_NR,
.label = "GPE3",
},
}, {
.chip = {
.base = S5PV310_GPE4(0),
.ngpio = S5PV310_GPIO_E4_NR,
.base = EXYNOS4_GPE4(0),
.ngpio = EXYNOS4_GPIO_E4_NR,
.label = "GPE4",
},
}, {
.chip = {
.base = S5PV310_GPF0(0),
.ngpio = S5PV310_GPIO_F0_NR,
.base = EXYNOS4_GPF0(0),
.ngpio = EXYNOS4_GPIO_F0_NR,
.label = "GPF0",
},
}, {
.chip = {
.base = S5PV310_GPF1(0),
.ngpio = S5PV310_GPIO_F1_NR,
.base = EXYNOS4_GPF1(0),
.ngpio = EXYNOS4_GPIO_F1_NR,
.label = "GPF1",
},
}, {
.chip = {
.base = S5PV310_GPF2(0),
.ngpio = S5PV310_GPIO_F2_NR,
.base = EXYNOS4_GPF2(0),
.ngpio = EXYNOS4_GPIO_F2_NR,
.label = "GPF2",
},
}, {
.chip = {
.base = S5PV310_GPF3(0),
.ngpio = S5PV310_GPIO_F3_NR,
.base = EXYNOS4_GPF3(0),
.ngpio = EXYNOS4_GPIO_F3_NR,
.label = "GPF3",
},
},
};
static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = {
static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
{
.chip = {
.base = S5PV310_GPJ0(0),
.ngpio = S5PV310_GPIO_J0_NR,
.base = EXYNOS4_GPJ0(0),
.ngpio = EXYNOS4_GPIO_J0_NR,
.label = "GPJ0",
},
}, {
.chip = {
.base = S5PV310_GPJ1(0),
.ngpio = S5PV310_GPIO_J1_NR,
.base = EXYNOS4_GPJ1(0),
.ngpio = EXYNOS4_GPIO_J1_NR,
.label = "GPJ1",
},
}, {
.chip = {
.base = S5PV310_GPK0(0),
.ngpio = S5PV310_GPIO_K0_NR,
.base = EXYNOS4_GPK0(0),
.ngpio = EXYNOS4_GPIO_K0_NR,
.label = "GPK0",
},
}, {
.chip = {
.base = S5PV310_GPK1(0),
.ngpio = S5PV310_GPIO_K1_NR,
.base = EXYNOS4_GPK1(0),
.ngpio = EXYNOS4_GPIO_K1_NR,
.label = "GPK1",
},
}, {
.chip = {
.base = S5PV310_GPK2(0),
.ngpio = S5PV310_GPIO_K2_NR,
.base = EXYNOS4_GPK2(0),
.ngpio = EXYNOS4_GPIO_K2_NR,
.label = "GPK2",
},
}, {
.chip = {
.base = S5PV310_GPK3(0),
.ngpio = S5PV310_GPIO_K3_NR,
.base = EXYNOS4_GPK3(0),
.ngpio = EXYNOS4_GPIO_K3_NR,
.label = "GPK3",
},
}, {
.chip = {
.base = S5PV310_GPL0(0),
.ngpio = S5PV310_GPIO_L0_NR,
.base = EXYNOS4_GPL0(0),
.ngpio = EXYNOS4_GPIO_L0_NR,
.label = "GPL0",
},
}, {
.chip = {
.base = S5PV310_GPL1(0),
.ngpio = S5PV310_GPIO_L1_NR,
.base = EXYNOS4_GPL1(0),
.ngpio = EXYNOS4_GPIO_L1_NR,
.label = "GPL1",
},
}, {
.chip = {
.base = S5PV310_GPL2(0),
.ngpio = S5PV310_GPIO_L2_NR,
.base = EXYNOS4_GPL2(0),
.ngpio = EXYNOS4_GPIO_L2_NR,
.label = "GPL2",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY0(0),
.ngpio = EXYNOS4_GPIO_Y0_NR,
.label = "GPY0",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY1(0),
.ngpio = EXYNOS4_GPIO_Y1_NR,
.label = "GPY1",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY2(0),
.ngpio = EXYNOS4_GPIO_Y2_NR,
.label = "GPY2",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY3(0),
.ngpio = EXYNOS4_GPIO_Y3_NR,
.label = "GPY3",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY4(0),
.ngpio = EXYNOS4_GPIO_Y4_NR,
.label = "GPY4",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY5(0),
.ngpio = EXYNOS4_GPIO_Y5_NR,
.label = "GPY5",
},
}, {
.config = &gpio_cfg_noint,
.chip = {
.base = EXYNOS4_GPY6(0),
.ngpio = EXYNOS4_GPIO_Y6_NR,
.label = "GPY6",
},
}, {
.base = (S5P_VA_GPIO2 + 0xC00),
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(0),
.chip = {
.base = S5PV310_GPX0(0),
.ngpio = S5PV310_GPIO_X0_NR,
.base = EXYNOS4_GPX0(0),
.ngpio = EXYNOS4_GPIO_X0_NR,
.label = "GPX0",
.to_irq = samsung_gpiolib_to_irq,
},
......@@ -213,8 +262,8 @@ static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = {
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(8),
.chip = {
.base = S5PV310_GPX1(0),
.ngpio = S5PV310_GPIO_X1_NR,
.base = EXYNOS4_GPX1(0),
.ngpio = EXYNOS4_GPIO_X1_NR,
.label = "GPX1",
.to_irq = samsung_gpiolib_to_irq,
},
......@@ -223,8 +272,8 @@ static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = {
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(16),
.chip = {
.base = S5PV310_GPX2(0),
.ngpio = S5PV310_GPIO_X2_NR,
.base = EXYNOS4_GPX2(0),
.ngpio = EXYNOS4_GPIO_X2_NR,
.label = "GPX2",
.to_irq = samsung_gpiolib_to_irq,
},
......@@ -233,72 +282,84 @@ static struct s3c_gpio_chip s5pv310_gpio_part2_4bit[] = {
.config = &gpio_cfg_noint,
.irq_base = IRQ_EINT(24),
.chip = {
.base = S5PV310_GPX3(0),
.ngpio = S5PV310_GPIO_X3_NR,
.base = EXYNOS4_GPX3(0),
.ngpio = EXYNOS4_GPIO_X3_NR,
.label = "GPX3",
.to_irq = samsung_gpiolib_to_irq,
},
},
};
static struct s3c_gpio_chip s5pv310_gpio_part3_4bit[] = {
static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
{
.chip = {
.base = S5PV310_GPZ(0),
.ngpio = S5PV310_GPIO_Z_NR,
.base = EXYNOS4_GPZ(0),
.ngpio = EXYNOS4_GPIO_Z_NR,
.label = "GPZ",
},
},
};
static __init int s5pv310_gpiolib_init(void)
static __init int exynos4_gpiolib_init(void)
{
struct s3c_gpio_chip *chip;
int i;
int group = 0;
int nr_chips;
/* GPIO part 1 */
chip = s5pv310_gpio_part1_4bit;
nr_chips = ARRAY_SIZE(s5pv310_gpio_part1_4bit);
chip = exynos4_gpio_part1_4bit;
nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
for (i = 0; i < nr_chips; i++, chip++) {
if (chip->config == NULL)
if (chip->config == NULL) {
chip->config = &gpio_cfg;
/* Assign the GPIO interrupt group */
chip->group = group++;
}
if (chip->base == NULL)
chip->base = S5P_VA_GPIO1 + (i) * 0x20;
}
samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part1_4bit, nr_chips);
samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
/* GPIO part 2 */
chip = s5pv310_gpio_part2_4bit;
nr_chips = ARRAY_SIZE(s5pv310_gpio_part2_4bit);
chip = exynos4_gpio_part2_4bit;
nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
for (i = 0; i < nr_chips; i++, chip++) {
if (chip->config == NULL)
if (chip->config == NULL) {
chip->config = &gpio_cfg;
/* Assign the GPIO interrupt group */
chip->group = group++;
}
if (chip->base == NULL)
chip->base = S5P_VA_GPIO2 + (i) * 0x20;
}
samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part2_4bit, nr_chips);
samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
/* GPIO part 3 */
chip = s5pv310_gpio_part3_4bit;
nr_chips = ARRAY_SIZE(s5pv310_gpio_part3_4bit);
chip = exynos4_gpio_part3_4bit;
nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
for (i = 0; i < nr_chips; i++, chip++) {
if (chip->config == NULL)
if (chip->config == NULL) {
chip->config = &gpio_cfg;
/* Assign the GPIO interrupt group */
chip->group = group++;
}
if (chip->base == NULL)
chip->base = S5P_VA_GPIO3 + (i) * 0x20;
}
samsung_gpiolib_add_4bit_chips(s5pv310_gpio_part3_4bit, nr_chips);
samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
return 0;
}
core_initcall(s5pv310_gpiolib_init);
core_initcall(exynos4_gpiolib_init);
arch/arm/mach-s5pv310/headsmp.S → arch/arm/mach-exynos4/headsmp.S
浏览文件 @ 9ced9f03
/*
* linux/arch/arm/mach-s5pv310/headsmp.S
* linux/arch/arm/mach-exynos4/headsmp.S
*
* Cloned from linux/arch/arm/mach-realview/headsmp.S
*
......@@ -16,11 +16,11 @@
__INIT
/*
* s5pv310 specific entry point for secondary CPUs. This provides
* exynos4 specific entry point for secondary CPUs. This provides
* a "holding pen" into which all secondary cores are held until we're
* ready for them to initialise.
*/
ENTRY(s5pv310_secondary_startup)
ENTRY(exynos4_secondary_startup)
mrc p15, 0, r0, c0, c0, 5
and r0, r0, #15
adr r4, 1f
......
arch/arm/mach-s5pv310/hotplug.c → arch/arm/mach-exynos4/hotplug.c
浏览文件 @ 9ced9f03
/* linux arch/arm/mach-s5pv310/hotplug.c
/* linux arch/arm/mach-exynos4/hotplug.c
*
* Cloned from linux/arch/arm/mach-realview/hotplug.c
*
......@@ -30,13 +30,13 @@ static inline void cpu_enter_lowpower(void)
* Turn off coherency
*/
" mrc p15, 0, %0, c1, c0, 1\n"
" bic %0, %0, #0x20\n"
" bic %0, %0, %3\n"
" mcr p15, 0, %0, c1, c0, 1\n"
" mrc p15, 0, %0, c1, c0, 0\n"
" bic %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 0\n"
: "=&r" (v)
: "r" (0), "Ir" (CR_C)
: "r" (0), "Ir" (CR_C), "Ir" (0x40)
: "cc");
}
......@@ -49,10 +49,10 @@ static inline void cpu_leave_lowpower(void)
" orr %0, %0, %1\n"
" mcr p15, 0, %0, c1, c0, 0\n"
" mrc p15, 0, %0, c1, c0, 1\n"
" orr %0, %0, #0x20\n"
" orr %0, %0, %2\n"
" mcr p15, 0, %0, c1, c0, 1\n"
: "=&r" (v)
: "Ir" (CR_C)
: "Ir" (CR_C), "Ir" (0x40)
: "cc");
}
......
arch/arm/mach-s5pv310/include/mach/debug-macro.S → arch/arm/mach-exynos4/include/mach/debug-macro.S
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/debug-macro.S
/* linux/arch/arm/mach-exynos4/include/mach/debug-macro.S
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S
*
......
arch/arm/mach-s5pv310/include/mach/entry-macro.S → arch/arm/mach-exynos4/include/mach/entry-macro.S
浏览文件 @ 9ced9f03
/* arch/arm/mach-s5pv310/include/mach/entry-macro.S
/* arch/arm/mach-exynos4/include/mach/entry-macro.S
*
* Cloned from arch/arm/mach-realview/include/mach/entry-macro.S
*
* Low-level IRQ helper macros for S5PV310 platforms
* Low-level IRQ helper macros for EXYNOS4 platforms
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
......
arch/arm/mach-exynos4/include/mach/gpio.h 0 → 100644
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-exynos4/include/mach/gpio.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - GPIO lib support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_GPIO_H
#define __ASM_ARCH_GPIO_H __FILE__
#define gpio_get_value __gpio_get_value
#define gpio_set_value __gpio_set_value
#define gpio_cansleep __gpio_cansleep
#define gpio_to_irq __gpio_to_irq
/* Practically, GPIO banks upto GPZ are the configurable gpio banks */
/* GPIO bank sizes */
#define EXYNOS4_GPIO_A0_NR (8)
#define EXYNOS4_GPIO_A1_NR (6)
#define EXYNOS4_GPIO_B_NR (8)
#define EXYNOS4_GPIO_C0_NR (5)
#define EXYNOS4_GPIO_C1_NR (5)
#define EXYNOS4_GPIO_D0_NR (4)
#define EXYNOS4_GPIO_D1_NR (4)
#define EXYNOS4_GPIO_E0_NR (5)
#define EXYNOS4_GPIO_E1_NR (8)
#define EXYNOS4_GPIO_E2_NR (6)
#define EXYNOS4_GPIO_E3_NR (8)
#define EXYNOS4_GPIO_E4_NR (8)
#define EXYNOS4_GPIO_F0_NR (8)
#define EXYNOS4_GPIO_F1_NR (8)
#define EXYNOS4_GPIO_F2_NR (8)
#define EXYNOS4_GPIO_F3_NR (6)
#define EXYNOS4_GPIO_J0_NR (8)
#define EXYNOS4_GPIO_J1_NR (5)
#define EXYNOS4_GPIO_K0_NR (7)
#define EXYNOS4_GPIO_K1_NR (7)
#define EXYNOS4_GPIO_K2_NR (7)
#define EXYNOS4_GPIO_K3_NR (7)
#define EXYNOS4_GPIO_L0_NR (8)
#define EXYNOS4_GPIO_L1_NR (3)
#define EXYNOS4_GPIO_L2_NR (8)
#define EXYNOS4_GPIO_X0_NR (8)
#define EXYNOS4_GPIO_X1_NR (8)
#define EXYNOS4_GPIO_X2_NR (8)
#define EXYNOS4_GPIO_X3_NR (8)
#define EXYNOS4_GPIO_Y0_NR (6)
#define EXYNOS4_GPIO_Y1_NR (4)
#define EXYNOS4_GPIO_Y2_NR (6)
#define EXYNOS4_GPIO_Y3_NR (8)
#define EXYNOS4_GPIO_Y4_NR (8)
#define EXYNOS4_GPIO_Y5_NR (8)
#define EXYNOS4_GPIO_Y6_NR (8)
#define EXYNOS4_GPIO_Z_NR (7)
/* GPIO bank numbers */
#define EXYNOS4_GPIO_NEXT(__gpio) \
((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
enum s5p_gpio_number {
EXYNOS4_GPIO_A0_START = 0,
EXYNOS4_GPIO_A1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A0),
EXYNOS4_GPIO_B_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_A1),
EXYNOS4_GPIO_C0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_B),
EXYNOS4_GPIO_C1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C0),
EXYNOS4_GPIO_D0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_C1),
EXYNOS4_GPIO_D1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D0),
EXYNOS4_GPIO_E0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_D1),
EXYNOS4_GPIO_E1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E0),
EXYNOS4_GPIO_E2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E1),
EXYNOS4_GPIO_E3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E2),
EXYNOS4_GPIO_E4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E3),
EXYNOS4_GPIO_F0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_E4),
EXYNOS4_GPIO_F1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F0),
EXYNOS4_GPIO_F2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F1),
EXYNOS4_GPIO_F3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F2),
EXYNOS4_GPIO_J0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_F3),
EXYNOS4_GPIO_J1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J0),
EXYNOS4_GPIO_K0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_J1),
EXYNOS4_GPIO_K1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K0),
EXYNOS4_GPIO_K2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K1),
EXYNOS4_GPIO_K3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K2),
EXYNOS4_GPIO_L0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_K3),
EXYNOS4_GPIO_L1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L0),
EXYNOS4_GPIO_L2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L1),
EXYNOS4_GPIO_X0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_L2),
EXYNOS4_GPIO_X1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X0),
EXYNOS4_GPIO_X2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X1),
EXYNOS4_GPIO_X3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X2),
EXYNOS4_GPIO_Y0_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_X3),
EXYNOS4_GPIO_Y1_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y0),
EXYNOS4_GPIO_Y2_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y1),
EXYNOS4_GPIO_Y3_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y2),
EXYNOS4_GPIO_Y4_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y3),
EXYNOS4_GPIO_Y5_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y4),
EXYNOS4_GPIO_Y6_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y5),
EXYNOS4_GPIO_Z_START = EXYNOS4_GPIO_NEXT(EXYNOS4_GPIO_Y6),
};
/* EXYNOS4 GPIO number definitions */
#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr))
#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr))
#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr))
#define EXYNOS4_GPC0(_nr) (EXYNOS4_GPIO_C0_START + (_nr))
#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr))
#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr))
#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr))
#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr))
#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr))
#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr))
#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr))
#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr))
#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr))
#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr))
#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr))
#define EXYNOS4_GPF3(_nr) (EXYNOS4_GPIO_F3_START + (_nr))
#define EXYNOS4_GPJ0(_nr) (EXYNOS4_GPIO_J0_START + (_nr))
#define EXYNOS4_GPJ1(_nr) (EXYNOS4_GPIO_J1_START + (_nr))
#define EXYNOS4_GPK0(_nr) (EXYNOS4_GPIO_K0_START + (_nr))
#define EXYNOS4_GPK1(_nr) (EXYNOS4_GPIO_K1_START + (_nr))
#define EXYNOS4_GPK2(_nr) (EXYNOS4_GPIO_K2_START + (_nr))
#define EXYNOS4_GPK3(_nr) (EXYNOS4_GPIO_K3_START + (_nr))
#define EXYNOS4_GPL0(_nr) (EXYNOS4_GPIO_L0_START + (_nr))
#define EXYNOS4_GPL1(_nr) (EXYNOS4_GPIO_L1_START + (_nr))
#define EXYNOS4_GPL2(_nr) (EXYNOS4_GPIO_L2_START + (_nr))
#define EXYNOS4_GPX0(_nr) (EXYNOS4_GPIO_X0_START + (_nr))
#define EXYNOS4_GPX1(_nr) (EXYNOS4_GPIO_X1_START + (_nr))
#define EXYNOS4_GPX2(_nr) (EXYNOS4_GPIO_X2_START + (_nr))
#define EXYNOS4_GPX3(_nr) (EXYNOS4_GPIO_X3_START + (_nr))
#define EXYNOS4_GPY0(_nr) (EXYNOS4_GPIO_Y0_START + (_nr))
#define EXYNOS4_GPY1(_nr) (EXYNOS4_GPIO_Y1_START + (_nr))
#define EXYNOS4_GPY2(_nr) (EXYNOS4_GPIO_Y2_START + (_nr))
#define EXYNOS4_GPY3(_nr) (EXYNOS4_GPIO_Y3_START + (_nr))
#define EXYNOS4_GPY4(_nr) (EXYNOS4_GPIO_Y4_START + (_nr))
#define EXYNOS4_GPY5(_nr) (EXYNOS4_GPIO_Y5_START + (_nr))
#define EXYNOS4_GPY6(_nr) (EXYNOS4_GPIO_Y6_START + (_nr))
#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr))
/* the end of the EXYNOS4 specific gpios */
#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1)
#define S3C_GPIO_END EXYNOS4_GPIO_END
/* define the number of gpios we need to the one after the GPZ() range */
#define ARCH_NR_GPIOS (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + \
CONFIG_SAMSUNG_GPIO_EXTRA + 1)
#include <asm-generic/gpio.h>
#endif /* __ASM_ARCH_GPIO_H */
arch/arm/mach-s5pv310/include/mach/hardware.h → arch/arm/mach-exynos4/include/mach/hardware.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/hardware.h
/* linux/arch/arm/mach-exynos4/include/mach/hardware.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - Hardware support
* EXYNOS4 - Hardware support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
arch/arm/mach-s5pv310/include/mach/io.h → arch/arm/mach-exynos4/include/mach/io.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/io.h
/* linux/arch/arm/mach-exynos4/include/mach/io.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org>
*
* Based on arch/arm/mach-s5p6442/include/mach/io.h
*
* Default IO routines for S5PV310
* Default IO routines for EXYNOS4
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
arch/arm/mach-s5pv310/include/mach/irqs.h → arch/arm/mach-exynos4/include/mach/irqs.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/irqs.h
/* linux/arch/arm/mach-exynos4/include/mach/irqs.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - IRQ definitions
* EXYNOS4 - IRQ definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -85,6 +85,9 @@
#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0)
#define IRQ_RTC_TIC COMBINER_IRQ(23, 1)
#define IRQ_GPIO_XB COMBINER_IRQ(24, 0)
#define IRQ_GPIO_XA COMBINER_IRQ(24, 1)
#define IRQ_UART0 COMBINER_IRQ(26, 0)
#define IRQ_UART1 COMBINER_IRQ(26, 1)
#define IRQ_UART2 COMBINER_IRQ(26, 2)
......@@ -108,6 +111,11 @@
#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0)
#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1)
#define IRQ_FIMC0 COMBINER_IRQ(32, 0)
#define IRQ_FIMC1 COMBINER_IRQ(32, 1)
#define IRQ_FIMC2 COMBINER_IRQ(33, 0)
#define IRQ_FIMC3 COMBINER_IRQ(33, 1)
#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0)
#define IRQ_MCT_L1 COMBINER_IRQ(35, 3)
......@@ -131,6 +139,7 @@
#define IRQ_MCT_L0 COMBINER_IRQ(51, 0)
#define IRQ_WDT COMBINER_IRQ(53, 0)
#define IRQ_MCT_G0 COMBINER_IRQ(53, 4)
#define MAX_COMBINER_NR 54
......@@ -139,8 +148,13 @@
#define S5P_EINT_BASE1 (S5P_IRQ_EINT_BASE + 0)
#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE + 16)
/* Set the default NR_IRQS */
/* optional GPIO interrupts */
#define S5P_GPIOINT_BASE (S5P_IRQ_EINT_BASE + 32)
#define IRQ_GPIO1_NR_GROUPS 16
#define IRQ_GPIO2_NR_GROUPS 9
#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
#define NR_IRQS (S5P_IRQ_EINT_BASE + 32)
/* Set the default NR_IRQS */
#define NR_IRQS (IRQ_GPIO_END)
#endif /* __ASM_ARCH_IRQS_H */
arch/arm/mach-exynos4/include/mach/map.h 0 → 100644
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-exynos4/include/mach/map.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* EXYNOS4 - Memory map definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_MAP_H
#define __ASM_ARCH_MAP_H __FILE__
#include <plat/map-base.h>
/*
* EXYNOS4 UART offset is 0x10000 but the older S5P SoCs are 0x400.
* So need to define it, and here is to avoid redefinition warning.
*/
#define S3C_UART_OFFSET (0x10000)
#include <plat/map-s5p.h>
#define EXYNOS4_PA_SYSRAM 0x02020000
#define EXYNOS4_PA_FIMC0 0x11800000
#define EXYNOS4_PA_FIMC1 0x11810000
#define EXYNOS4_PA_FIMC2 0x11820000
#define EXYNOS4_PA_FIMC3 0x11830000
#define EXYNOS4_PA_I2S0 0x03830000
#define EXYNOS4_PA_I2S1 0xE3100000
#define EXYNOS4_PA_I2S2 0xE2A00000
#define EXYNOS4_PA_PCM0 0x03840000
#define EXYNOS4_PA_PCM1 0x13980000
#define EXYNOS4_PA_PCM2 0x13990000
#define EXYNOS4_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
#define EXYNOS4_PA_ONENAND 0x0C000000
#define EXYNOS4_PA_ONENAND_DMA 0x0C600000
#define EXYNOS4_PA_CHIPID 0x10000000
#define EXYNOS4_PA_SYSCON 0x10010000
#define EXYNOS4_PA_PMU 0x10020000
#define EXYNOS4_PA_CMU 0x10030000
#define EXYNOS4_PA_SYSTIMER 0x10050000
#define EXYNOS4_PA_WATCHDOG 0x10060000
#define EXYNOS4_PA_RTC 0x10070000
#define EXYNOS4_PA_KEYPAD 0x100A0000
#define EXYNOS4_PA_DMC0 0x10400000
#define EXYNOS4_PA_COMBINER 0x10448000
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_GIC_CPU 0x10500100
#define EXYNOS4_PA_TWD 0x10500600
#define EXYNOS4_PA_GIC_DIST 0x10501000
#define EXYNOS4_PA_L2CC 0x10502000
#define EXYNOS4_PA_MDMA 0x10810000
#define EXYNOS4_PA_PDMA0 0x12680000
#define EXYNOS4_PA_PDMA1 0x12690000
#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000
#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000
#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000
#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000
#define EXYNOS4_PA_SYSMMU_FIMC2 0x11A40000
#define EXYNOS4_PA_SYSMMU_FIMC3 0x11A50000
#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000
#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000
#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000
#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000
#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000
#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000
#define EXYNOS4_PA_SYSMMU_MDMA2 0x12A40000
#define EXYNOS4_PA_SYSMMU_TV 0x12E20000
#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
#define EXYNOS4_PA_GPIO1 0x11400000
#define EXYNOS4_PA_GPIO2 0x11000000
#define EXYNOS4_PA_GPIO3 0x03860000
#define EXYNOS4_PA_MIPI_CSIS0 0x11880000
#define EXYNOS4_PA_MIPI_CSIS1 0x11890000
#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
#define EXYNOS4_PA_SATA 0x12560000
#define EXYNOS4_PA_SATAPHY 0x125D0000
#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000
#define EXYNOS4_PA_SROMC 0x12570000
#define EXYNOS4_PA_UART 0x13800000
#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
#define EXYNOS4_PA_AC97 0x139A0000
#define EXYNOS4_PA_SPDIF 0x139B0000
#define EXYNOS4_PA_TIMER 0x139D0000
#define EXYNOS4_PA_SDRAM 0x40000000
/* Compatibiltiy Defines */
#define S3C_PA_HSMMC0 EXYNOS4_PA_HSMMC(0)
#define S3C_PA_HSMMC1 EXYNOS4_PA_HSMMC(1)
#define S3C_PA_HSMMC2 EXYNOS4_PA_HSMMC(2)
#define S3C_PA_HSMMC3 EXYNOS4_PA_HSMMC(3)
#define S3C_PA_IIC EXYNOS4_PA_IIC(0)
#define S3C_PA_IIC1 EXYNOS4_PA_IIC(1)
#define S3C_PA_IIC2 EXYNOS4_PA_IIC(2)
#define S3C_PA_IIC3 EXYNOS4_PA_IIC(3)
#define S3C_PA_IIC4 EXYNOS4_PA_IIC(4)
#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5)
#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6)
#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
#define S3C_PA_RTC EXYNOS4_PA_RTC
#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
#define S5P_PA_CHIPID EXYNOS4_PA_CHIPID
#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2
#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3
#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0
#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1
#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND
#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
#define S5P_PA_SROMC EXYNOS4_PA_SROMC
#define S5P_PA_SYSCON EXYNOS4_PA_SYSCON
#define S5P_PA_TIMER EXYNOS4_PA_TIMER
#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD
/* UART */
#define S3C_PA_UART EXYNOS4_PA_UART
#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET))
#define S5P_PA_UART0 S5P_PA_UART(0)
#define S5P_PA_UART1 S5P_PA_UART(1)
#define S5P_PA_UART2 S5P_PA_UART(2)
#define S5P_PA_UART3 S5P_PA_UART(3)
#define S5P_PA_UART4 S5P_PA_UART(4)
#define S5P_SZ_UART SZ_256
#endif /* __ASM_ARCH_MAP_H */
arch/arm/mach-s5pv310/include/mach/memory.h → arch/arm/mach-exynos4/include/mach/memory.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/memory.h
/* linux/arch/arm/mach-exynos4/include/mach/memory.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - Memory definitions
* EXYNOS4 - Memory definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
arch/arm/mach-exynos4/include/mach/pm-core.h 0 → 100644
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-exynos4/include/mach/pm-core.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* EXYNOS4210 - PM core support for arch/arm/plat-s5p/pm.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <mach/regs-pmu.h>
static inline void s3c_pm_debug_init_uart(void)
{
/* nothing here yet */
}
static inline void s3c_pm_arch_prepare_irqs(void)
{
unsigned int tmp;
tmp = __raw_readl(S5P_WAKEUP_MASK);
tmp &= ~(1 << 31);
__raw_writel(tmp, S5P_WAKEUP_MASK);
__raw_writel(s3c_irqwake_intmask, S5P_WAKEUP_MASK);
__raw_writel(s3c_irqwake_eintmask, S5P_EINT_WAKEUP_MASK);
}
static inline void s3c_pm_arch_stop_clocks(void)
{
/* nothing here yet */
}
static inline void s3c_pm_arch_show_resume_irqs(void)
{
/* nothing here yet */
}
static inline void s3c_pm_arch_update_uart(void __iomem *regs,
struct pm_uart_save *save)
{
/* nothing here yet */
}
arch/arm/mach-s5pv310/include/mach/pwm-clock.h → arch/arm/mach-exynos4/include/mach/pwm-clock.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/pwm-clock.h
/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
......@@ -10,7 +10,7 @@
*
* Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h
*
* S5PV310 - pwm clock and timer support
* EXYNOS4 - pwm clock and timer support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
arch/arm/mach-s5pv310/include/mach/regs-clock.h → arch/arm/mach-exynos4/include/mach/regs-clock.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/regs-clock.h
/* linux/arch/arm/mach-exynos4/include/mach/regs-clock.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - Clock register definitions
* EXYNOS4 - Clock register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -17,13 +17,13 @@
#define S5P_CLKREG(x) (S5P_VA_CMU + (x))
#define S5P_INFORM0 S5P_CLKREG(0x800)
#define S5P_CLKDIV_LEFTBUS S5P_CLKREG(0x04500)
#define S5P_CLKDIV_STAT_LEFTBUS S5P_CLKREG(0x04600)
#define S5P_CLKGATE_IP_LEFTBUS S5P_CLKREG(0x04800)
#define S5P_CLKDIV_RIGHTBUS S5P_CLKREG(0x08500)
#define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600)
#define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800)
#define S5P_EPLL_CON0 S5P_CLKREG(0x0C110)
#define S5P_EPLL_CON1 S5P_CLKREG(0x0C114)
......@@ -33,18 +33,24 @@
#define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210)
#define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214)
#define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220)
#define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228)
#define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230)
#define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234)
#define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238)
#define S5P_CLKSRC_MAUDIO S5P_CLKREG(0x0C23C)
#define S5P_CLKSRC_FSYS S5P_CLKREG(0x0C240)
#define S5P_CLKSRC_PERIL0 S5P_CLKREG(0x0C250)
#define S5P_CLKSRC_PERIL1 S5P_CLKREG(0x0C254)
#define S5P_CLKDIV_TOP S5P_CLKREG(0x0C510)
#define S5P_CLKDIV_CAM S5P_CLKREG(0x0C520)
#define S5P_CLKDIV_TV S5P_CLKREG(0x0C524)
#define S5P_CLKDIV_MFC S5P_CLKREG(0x0C528)
#define S5P_CLKDIV_G3D S5P_CLKREG(0x0C52C)
#define S5P_CLKDIV_IMAGE S5P_CLKREG(0x0C530)
#define S5P_CLKDIV_LCD0 S5P_CLKREG(0x0C534)
#define S5P_CLKDIV_LCD1 S5P_CLKREG(0x0C538)
#define S5P_CLKDIV_MAUDIO S5P_CLKREG(0x0C53C)
#define S5P_CLKDIV_FSYS0 S5P_CLKREG(0x0C540)
#define S5P_CLKDIV_FSYS1 S5P_CLKREG(0x0C544)
#define S5P_CLKDIV_FSYS2 S5P_CLKREG(0x0C548)
......@@ -58,25 +64,36 @@
#define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310)
#define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320)
#define S5P_CLKSRC_MASK_TV S5P_CLKREG(0x0C324)
#define S5P_CLKSRC_MASK_LCD0 S5P_CLKREG(0x0C334)
#define S5P_CLKSRC_MASK_LCD1 S5P_CLKREG(0x0C338)
#define S5P_CLKSRC_MASK_MAUDIO S5P_CLKREG(0x0C33C)
#define S5P_CLKSRC_MASK_FSYS S5P_CLKREG(0x0C340)
#define S5P_CLKSRC_MASK_PERIL0 S5P_CLKREG(0x0C350)
#define S5P_CLKSRC_MASK_PERIL1 S5P_CLKREG(0x0C354)
#define S5P_CLKDIV_STAT_TOP S5P_CLKREG(0x0C610)
#define S5P_CLKGATE_SCLKCAM S5P_CLKREG(0x0C820)
#define S5P_CLKGATE_IP_CAM S5P_CLKREG(0x0C920)
#define S5P_CLKGATE_IP_TV S5P_CLKREG(0x0C924)
#define S5P_CLKGATE_IP_MFC S5P_CLKREG(0x0C928)
#define S5P_CLKGATE_IP_G3D S5P_CLKREG(0x0C92C)
#define S5P_CLKGATE_IP_IMAGE S5P_CLKREG(0x0C930)
#define S5P_CLKGATE_IP_LCD0 S5P_CLKREG(0x0C934)
#define S5P_CLKGATE_IP_LCD1 S5P_CLKREG(0x0C938)
#define S5P_CLKGATE_IP_FSYS S5P_CLKREG(0x0C940)
#define S5P_CLKGATE_IP_GPS S5P_CLKREG(0x0C94C)
#define S5P_CLKGATE_IP_PERIL S5P_CLKREG(0x0C950)
#define S5P_CLKGATE_IP_PERIR S5P_CLKREG(0x0C960)
#define S5P_CLKGATE_BLOCK S5P_CLKREG(0x0C970)
#define S5P_CLKSRC_MASK_DMC S5P_CLKREG(0x10300)
#define S5P_CLKSRC_DMC S5P_CLKREG(0x10200)
#define S5P_CLKDIV_DMC0 S5P_CLKREG(0x10500)
#define S5P_CLKDIV_DMC1 S5P_CLKREG(0x10504)
#define S5P_CLKDIV_STAT_DMC0 S5P_CLKREG(0x10600)
#define S5P_CLKGATE_IP_DMC S5P_CLKREG(0x10900)
#define S5P_APLL_LOCK S5P_CLKREG(0x14000)
#define S5P_MPLL_LOCK S5P_CLKREG(0x14004)
......@@ -94,21 +111,18 @@
#define S5P_CLKDIV_STATCPU1 S5P_CLKREG(0x14604)
#define S5P_CLKGATE_SCLKCPU S5P_CLKREG(0x14800)
#define S5P_CLKGATE_IP_CPU S5P_CLKREG(0x14900)
/* APLL_LOCK */
#define S5P_APLL_LOCKTIME (0x1C20) /* 300us */
/* APLL_CON0 */
#define S5P_APLLCON0_ENABLE_SHIFT (31)
#define S5P_APLLCON0_LOCKED_SHIFT (29)
#define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1)
#define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1)
/* CLK_SRC_CPU */
#define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16)
#define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)
/* CLKDIV_CPU0 */
#define S5P_CLKDIV_CPU0_CORE_SHIFT (0)
#define S5P_CLKDIV_CPU0_CORE_MASK (0x7 << S5P_CLKDIV_CPU0_CORE_SHIFT)
#define S5P_CLKDIV_CPU0_COREM0_SHIFT (4)
......@@ -124,7 +138,6 @@
#define S5P_CLKDIV_CPU0_APLL_SHIFT (24)
#define S5P_CLKDIV_CPU0_APLL_MASK (0x7 << S5P_CLKDIV_CPU0_APLL_SHIFT)
/* CLKDIV_DMC0 */
#define S5P_CLKDIV_DMC0_ACP_SHIFT (0)
#define S5P_CLKDIV_DMC0_ACP_MASK (0x7 << S5P_CLKDIV_DMC0_ACP_SHIFT)
#define S5P_CLKDIV_DMC0_ACPPCLK_SHIFT (4)
......@@ -142,7 +155,6 @@
#define S5P_CLKDIV_DMC0_CORETI_SHIFT (28)
#define S5P_CLKDIV_DMC0_CORETI_MASK (0x7 << S5P_CLKDIV_DMC0_CORETI_SHIFT)
/* CLKDIV_TOP */
#define S5P_CLKDIV_TOP_ACLK200_SHIFT (0)
#define S5P_CLKDIV_TOP_ACLK200_MASK (0x7 << S5P_CLKDIV_TOP_ACLK200_SHIFT)
#define S5P_CLKDIV_TOP_ACLK100_SHIFT (4)
......@@ -154,13 +166,14 @@
#define S5P_CLKDIV_TOP_ONENAND_SHIFT (16)
#define S5P_CLKDIV_TOP_ONENAND_MASK (0x7 << S5P_CLKDIV_TOP_ONENAND_SHIFT)
/* CLKDIV_LEFTBUS / CLKDIV_RIGHTBUS*/
#define S5P_CLKDIV_BUS_GDLR_SHIFT (0)
#define S5P_CLKDIV_BUS_GDLR_MASK (0x7 << S5P_CLKDIV_BUS_GDLR_SHIFT)
#define S5P_CLKDIV_BUS_GPLR_SHIFT (4)
#define S5P_CLKDIV_BUS_GPLR_MASK (0x7 << S5P_CLKDIV_BUS_GPLR_SHIFT)
/* Compatibility defines */
/* Compatibility defines and inclusion */
#include <mach/regs-pmu.h>
#define S5P_EPLL_CON S5P_EPLL_CON0
......
arch/arm/mach-s5pv310/include/mach/regs-gpio.h → arch/arm/mach-exynos4/include/mach/regs-gpio.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/regs-gpio.h
/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - GPIO (including EINT) register definitions
* EXYNOS4 - GPIO (including EINT) register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -16,17 +16,17 @@
#include <mach/map.h>
#include <mach/irqs.h>
#define S5PV310_EINT40CON (S5P_VA_GPIO2 + 0xE00)
#define S5P_EINT_CON(x) (S5PV310_EINT40CON + ((x) * 0x4))
#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00)
#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4))
#define S5PV310_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80)
#define S5P_EINT_FLTCON(x) (S5PV310_EINT40FLTCON0 + ((x) * 0x4))
#define EXYNOS4_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80)
#define S5P_EINT_FLTCON(x) (EXYNOS4_EINT40FLTCON0 + ((x) * 0x4))
#define S5PV310_EINT40MASK (S5P_VA_GPIO2 + 0xF00)
#define S5P_EINT_MASK(x) (S5PV310_EINT40MASK + ((x) * 0x4))
#define EXYNOS4_EINT40MASK (S5P_VA_GPIO2 + 0xF00)
#define S5P_EINT_MASK(x) (EXYNOS4_EINT40MASK + ((x) * 0x4))
#define S5PV310_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
#define S5P_EINT_PEND(x) (S5PV310_EINT40PEND + ((x) * 0x4))
#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4))
#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
......@@ -34,9 +34,9 @@
#define EINT_MODE S3C_GPIO_SFN(0xf)
#define EINT_GPIO_0(x) S5PV310_GPX0(x)
#define EINT_GPIO_1(x) S5PV310_GPX1(x)
#define EINT_GPIO_2(x) S5PV310_GPX2(x)
#define EINT_GPIO_3(x) S5PV310_GPX3(x)
#define EINT_GPIO_0(x) EXYNOS4_GPX0(x)
#define EINT_GPIO_1(x) EXYNOS4_GPX1(x)
#define EINT_GPIO_2(x) EXYNOS4_GPX2(x)
#define EINT_GPIO_3(x) EXYNOS4_GPX3(x)
#endif /* __ASM_ARCH_REGS_GPIO_H */
arch/arm/mach-s5pv310/include/mach/regs-irq.h → arch/arm/mach-exynos4/include/mach/regs-irq.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/regs-irq.h
/* linux/arch/arm/mach-exynos4/include/mach/regs-irq.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - IRQ register definitions
* EXYNOS4 - IRQ register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
arch/arm/mach-exynos4/include/mach/regs-mct.h 0 → 100644
浏览文件 @ 9ced9f03
/* arch/arm/mach-exynos4/include/mach/regs-mct.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 MCT configutation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGS_MCT_H
#define __ASM_ARCH_REGS_MCT_H __FILE__
#include <mach/map.h>
#define EXYNOS4_MCTREG(x) (S5P_VA_SYSTIMER + (x))
#define EXYNOS4_MCT_G_CNT_L EXYNOS4_MCTREG(0x100)
#define EXYNOS4_MCT_G_CNT_U EXYNOS4_MCTREG(0x104)
#define EXYNOS4_MCT_G_CNT_WSTAT EXYNOS4_MCTREG(0x110)
#define EXYNOS4_MCT_G_COMP0_L EXYNOS4_MCTREG(0x200)
#define EXYNOS4_MCT_G_COMP0_U EXYNOS4_MCTREG(0x204)
#define EXYNOS4_MCT_G_COMP0_ADD_INCR EXYNOS4_MCTREG(0x208)
#define EXYNOS4_MCT_G_TCON EXYNOS4_MCTREG(0x240)
#define EXYNOS4_MCT_G_INT_CSTAT EXYNOS4_MCTREG(0x244)
#define EXYNOS4_MCT_G_INT_ENB EXYNOS4_MCTREG(0x248)
#define EXYNOS4_MCT_G_WSTAT EXYNOS4_MCTREG(0x24C)
#define EXYNOS4_MCT_L0_BASE EXYNOS4_MCTREG(0x300)
#define EXYNOS4_MCT_L1_BASE EXYNOS4_MCTREG(0x400)
#define MCT_L_TCNTB_OFFSET (0x00)
#define MCT_L_ICNTB_OFFSET (0x08)
#define MCT_L_TCON_OFFSET (0x20)
#define MCT_L_INT_CSTAT_OFFSET (0x30)
#define MCT_L_INT_ENB_OFFSET (0x34)
#define MCT_L_WSTAT_OFFSET (0x40)
#define MCT_G_TCON_START (1 << 8)
#define MCT_G_TCON_COMP0_AUTO_INC (1 << 1)
#define MCT_G_TCON_COMP0_ENABLE (1 << 0)
#define MCT_L_TCON_INTERVAL_MODE (1 << 2)
#define MCT_L_TCON_INT_START (1 << 1)
#define MCT_L_TCON_TIMER_START (1 << 0)
#endif /* __ASM_ARCH_REGS_MCT_H */
arch/arm/mach-s5pv310/include/mach/regs-mem.h → arch/arm/mach-exynos4/include/mach/regs-mem.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/regs-mem.h
/* linux/arch/arm/mach-exynos4/include/mach/regs-mem.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - SROMC and DMC register definitions
* EXYNOS4 - SROMC and DMC register definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
arch/arm/mach-exynos4/include/mach/regs-pmu.h 0 → 100644
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-exynos4/include/mach/regs-pmu.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - Power management unit definition
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_REGS_PMU_H
#define __ASM_ARCH_REGS_PMU_H __FILE__
#include <mach/map.h>
#define S5P_PMUREG(x) (S5P_VA_PMU + (x))
#define S5P_CENTRAL_SEQ_CONFIGURATION S5P_PMUREG(0x0200)
#define S5P_CENTRAL_LOWPWR_CFG (1 << 16)
#define S5P_CENTRAL_SEQ_OPTION S5P_PMUREG(0x0208)
#define S5P_USE_STANDBY_WFI0 (1 << 16)
#define S5P_USE_STANDBY_WFI1 (1 << 17)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
#define S5P_USE_STANDBY_WFE1 (1 << 25)
#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24))
#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
#define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4)
#define S5P_MIPI_DPHY_ENABLE (1 << 0)
#define S5P_MIPI_DPHY_SRESETN (1 << 1)
#define S5P_MIPI_DPHY_MRESETN (1 << 2)
#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720)
#define S5P_INFORM0 S5P_PMUREG(0x0800)
#define S5P_INFORM1 S5P_PMUREG(0x0804)
#define S5P_INFORM2 S5P_PMUREG(0x0808)
#define S5P_INFORM3 S5P_PMUREG(0x080C)
#define S5P_INFORM4 S5P_PMUREG(0x0810)
#define S5P_INFORM5 S5P_PMUREG(0x0814)
#define S5P_INFORM6 S5P_PMUREG(0x0818)
#define S5P_INFORM7 S5P_PMUREG(0x081C)
#define S5P_ARM_CORE0_LOWPWR S5P_PMUREG(0x1000)
#define S5P_DIS_IRQ_CORE0 S5P_PMUREG(0x1004)
#define S5P_DIS_IRQ_CENTRAL0 S5P_PMUREG(0x1008)
#define S5P_ARM_CORE1_LOWPWR S5P_PMUREG(0x1010)
#define S5P_DIS_IRQ_CORE1 S5P_PMUREG(0x1014)
#define S5P_DIS_IRQ_CENTRAL1 S5P_PMUREG(0x1018)
#define S5P_ARM_COMMON_LOWPWR S5P_PMUREG(0x1080)
#define S5P_L2_0_LOWPWR S5P_PMUREG(0x10C0)
#define S5P_L2_1_LOWPWR S5P_PMUREG(0x10C4)
#define S5P_CMU_ACLKSTOP_LOWPWR S5P_PMUREG(0x1100)
#define S5P_CMU_SCLKSTOP_LOWPWR S5P_PMUREG(0x1104)
#define S5P_CMU_RESET_LOWPWR S5P_PMUREG(0x110C)
#define S5P_APLL_SYSCLK_LOWPWR S5P_PMUREG(0x1120)
#define S5P_MPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1124)
#define S5P_VPLL_SYSCLK_LOWPWR S5P_PMUREG(0x1128)
#define S5P_EPLL_SYSCLK_LOWPWR S5P_PMUREG(0x112C)
#define S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR S5P_PMUREG(0x1138)
#define S5P_CMU_RESET_GPSALIVE_LOWPWR S5P_PMUREG(0x113C)
#define S5P_CMU_CLKSTOP_CAM_LOWPWR S5P_PMUREG(0x1140)
#define S5P_CMU_CLKSTOP_TV_LOWPWR S5P_PMUREG(0x1144)
#define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148)
#define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C)
#define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150)
#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154)
#define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158)
#define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C)
#define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160)
#define S5P_CMU_RESET_TV_LOWPWR S5P_PMUREG(0x1164)
#define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168)
#define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C)
#define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170)
#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174)
#define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178)
#define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C)
#define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180)
#define S5P_TOP_RETENTION_LOWPWR S5P_PMUREG(0x1184)
#define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188)
#define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0)
#define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0)
#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4)
#define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8)
#define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC)
#define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0)
#define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4)
#define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8)
#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0)
#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4)
#define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200)
#define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204)
#define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220)
#define S5P_PAD_RETENTION_UART_LOWPWR S5P_PMUREG(0x1224)
#define S5P_PAD_RETENTION_MMCA_LOWPWR S5P_PMUREG(0x1228)
#define S5P_PAD_RETENTION_MMCB_LOWPWR S5P_PMUREG(0x122C)
#define S5P_PAD_RETENTION_EBIA_LOWPWR S5P_PMUREG(0x1230)
#define S5P_PAD_RETENTION_EBIB_LOWPWR S5P_PMUREG(0x1234)
#define S5P_PAD_RETENTION_ISOLATION_LOWPWR S5P_PMUREG(0x1240)
#define S5P_PAD_RETENTION_ALV_SEL_LOWPWR S5P_PMUREG(0x1260)
#define S5P_XUSBXTI_LOWPWR S5P_PMUREG(0x1280)
#define S5P_XXTI_LOWPWR S5P_PMUREG(0x1284)
#define S5P_EXT_REGULATOR_LOWPWR S5P_PMUREG(0x12C0)
#define S5P_GPIO_MODE_LOWPWR S5P_PMUREG(0x1300)
#define S5P_GPIO_MODE_MAUDIO_LOWPWR S5P_PMUREG(0x1340)
#define S5P_CAM_LOWPWR S5P_PMUREG(0x1380)
#define S5P_TV_LOWPWR S5P_PMUREG(0x1384)
#define S5P_MFC_LOWPWR S5P_PMUREG(0x1388)
#define S5P_G3D_LOWPWR S5P_PMUREG(0x138C)
#define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390)
#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394)
#define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398)
#define S5P_GPS_LOWPWR S5P_PMUREG(0x139C)
#define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0)
#define S5P_ARM_CORE0_CONFIGURATION S5P_PMUREG(0x2000)
#define S5P_ARM_CORE0_OPTION S5P_PMUREG(0x2008)
#define S5P_ARM_CORE1_CONFIGURATION S5P_PMUREG(0x2080)
#define S5P_ARM_CORE1_STATUS S5P_PMUREG(0x2084)
#define S5P_ARM_CORE1_OPTION S5P_PMUREG(0x2088)
#define S5P_ARM_COMMON_OPTION S5P_PMUREG(0x2408)
#define S5P_TOP_PWR_OPTION S5P_PMUREG(0x2C48)
#define S5P_CAM_OPTION S5P_PMUREG(0x3C08)
#define S5P_TV_OPTION S5P_PMUREG(0x3C28)
#define S5P_MFC_OPTION S5P_PMUREG(0x3C48)
#define S5P_G3D_OPTION S5P_PMUREG(0x3C68)
#define S5P_LCD0_OPTION S5P_PMUREG(0x3C88)
#define S5P_LCD1_OPTION S5P_PMUREG(0x3CA8)
#define S5P_MAUDIO_OPTION S5P_PMUREG(0x3CC8)
#define S5P_GPS_OPTION S5P_PMUREG(0x3CE8)
#define S5P_GPS_ALIVE_OPTION S5P_PMUREG(0x3D08)
#define S5P_PAD_RET_MAUDIO_OPTION S5P_PMUREG(0x3028)
#define S5P_PAD_RET_GPIO_OPTION S5P_PMUREG(0x3108)
#define S5P_PAD_RET_UART_OPTION S5P_PMUREG(0x3128)
#define S5P_PAD_RET_MMCA_OPTION S5P_PMUREG(0x3148)
#define S5P_PAD_RET_MMCB_OPTION S5P_PMUREG(0x3168)
#define S5P_PAD_RET_EBIA_OPTION S5P_PMUREG(0x3188)
#define S5P_PAD_RET_EBIB_OPTION S5P_PMUREG(0x31A8)
#define S5P_PMU_CAM_CONF S5P_PMUREG(0x3C00)
#define S5P_PMU_TV_CONF S5P_PMUREG(0x3C20)
#define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40)
#define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60)
#define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80)
#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0)
#define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0)
#define S5P_PMU_SATA_PHY_CONTROL_EN 0x1
#define S5P_INT_LOCAL_PWR_EN 0x7
#define S5P_CHECK_SLEEP 0x00000BAD
#endif /* __ASM_ARCH_REGS_PMU_H */
arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h → arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/regs-sysmmu.h
/* linux/arch/arm/mach-exynos4/include/mach/regs-sysmmu.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - System MMU register
* EXYNOS4 - System MMU register
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -19,6 +19,10 @@
#define S5P_MMU_FLUSH 0x00C
#define S5P_PT_BASE_ADDR 0x014
#define S5P_INT_STATUS 0x018
#define S5P_INT_CLEAR 0x01C
#define S5P_PAGE_FAULT_ADDR 0x024
#define S5P_AW_FAULT_ADDR 0x028
#define S5P_AR_FAULT_ADDR 0x02C
#define S5P_DEFAULT_SLAVE_ADDR 0x030
#endif /* __ASM_ARCH_REGS_SYSMMU_H */
arch/arm/mach-s5pv310/include/mach/smp.h → arch/arm/mach-exynos4/include/mach/smp.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/smp.h
/* linux/arch/arm/mach-exynos4/include/mach/smp.h
*
* Cloned from arch/arm/mach-realview/include/mach/smp.h
*/
......
arch/arm/mach-exynos4/include/mach/sysmmu.h 0 → 100644
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-exynos4/include/mach/sysmmu.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Samsung sysmmu driver for EXYNOS4
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARM_ARCH_SYSMMU_H
#define __ASM_ARM_ARCH_SYSMMU_H __FILE__
enum exynos4_sysmmu_ips {
SYSMMU_MDMA,
SYSMMU_SSS,
SYSMMU_FIMC0,
SYSMMU_FIMC1,
SYSMMU_FIMC2,
SYSMMU_FIMC3,
SYSMMU_JPEG,
SYSMMU_FIMD0,
SYSMMU_FIMD1,
SYSMMU_PCIe,
SYSMMU_G2D,
SYSMMU_ROTATOR,
SYSMMU_MDMA2,
SYSMMU_TV,
SYSMMU_MFC_L,
SYSMMU_MFC_R,
EXYNOS4_SYSMMU_TOTAL_IPNUM,
};
#define S5P_SYSMMU_TOTAL_IPNUM EXYNOS4_SYSMMU_TOTAL_IPNUM
extern const char *sysmmu_ips_name[EXYNOS4_SYSMMU_TOTAL_IPNUM];
typedef enum exynos4_sysmmu_ips sysmmu_ips;
void sysmmu_clk_init(struct device *dev, sysmmu_ips ips);
void sysmmu_clk_enable(sysmmu_ips ips);
void sysmmu_clk_disable(sysmmu_ips ips);
#endif /* __ASM_ARM_ARCH_SYSMMU_H */
arch/arm/mach-s5pv310/include/mach/system.h → arch/arm/mach-exynos4/include/mach/system.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/system.h
/* linux/arch/arm/mach-exynos4/include/mach/system.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - system support header
* EXYNOS4 - system support header
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
arch/arm/mach-s5pv310/include/mach/timex.h → arch/arm/mach-exynos4/include/mach/timex.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/timex.h
/* linux/arch/arm/mach-exynos4/include/mach/timex.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright (c) 2003-2010 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
* Based on arch/arm/mach-s5p6442/include/mach/timex.h
*
* S5PV310 - time parameters
* EXYNOS4 - time parameters
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
arch/arm/mach-s5pv310/include/mach/uncompress.h → arch/arm/mach-exynos4/include/mach/uncompress.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/uncompress.h
/* linux/arch/arm/mach-exynos4/include/mach/uncompress.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - uncompress code
* EXYNOS4 - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......
arch/arm/mach-s5pv310/include/mach/vmalloc.h → arch/arm/mach-exynos4/include/mach/vmalloc.h
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/include/mach/vmalloc.h
/* linux/arch/arm/mach-exynos4/include/mach/vmalloc.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Copyright 2010 Ben Dooks <ben-linux@fluff.org>
*
......@@ -11,7 +11,7 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* S5PV310 vmalloc definition
* EXYNOS4 vmalloc definition
*/
#ifndef __ASM_ARCH_VMALLOC_H
......
arch/arm/mach-s5pv310/init.c → arch/arm/mach-exynos4/init.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/init.c
/* linux/arch/arm/mach-exynos4/init.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
......@@ -14,7 +14,7 @@
#include <plat/devs.h>
#include <plat/regs-serial.h>
static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = {
static struct s3c24xx_uart_clksrc exynos4_serial_clocks[] = {
[0] = {
.name = "uclk1",
.divisor = 1,
......@@ -24,7 +24,7 @@ static struct s3c24xx_uart_clksrc s5pv310_serial_clocks[] = {
};
/* uart registration process */
void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
{
struct s3c2410_uartcfg *tcfg = cfg;
u32 ucnt;
......@@ -32,8 +32,8 @@ void __init s5pv310_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
for (ucnt = 0; ucnt < no; ucnt++, tcfg++) {
if (!tcfg->clocks) {
tcfg->has_fracval = 1;
tcfg->clocks = s5pv310_serial_clocks;
tcfg->clocks_size = ARRAY_SIZE(s5pv310_serial_clocks);
tcfg->clocks = exynos4_serial_clocks;
tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
}
}
......
arch/arm/mach-s5pv310/irq-combiner.c → arch/arm/mach-exynos4/irq-combiner.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/irq-combiner.c
/* linux/arch/arm/mach-exynos4/irq-combiner.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Based on arch/arm/common/gic.c
......
arch/arm/mach-s5pv310/irq-eint.c → arch/arm/mach-exynos4/irq-eint.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/irq-eint.c
/* linux/arch/arm/mach-exynos4/irq-eint.c
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5PV310 - IRQ EINT support
* EXYNOS4 - IRQ EINT support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
......@@ -27,7 +27,7 @@ static DEFINE_SPINLOCK(eint_lock);
static unsigned int eint0_15_data[16];
static unsigned int s5pv310_get_irq_nr(unsigned int number)
static unsigned int exynos4_get_irq_nr(unsigned int number)
{
u32 ret = 0;
......@@ -48,7 +48,7 @@ static unsigned int s5pv310_get_irq_nr(unsigned int number)
return ret;
}
static inline void s5pv310_irq_eint_mask(struct irq_data *data)
static inline void exynos4_irq_eint_mask(struct irq_data *data)
{
u32 mask;
......@@ -59,7 +59,7 @@ static inline void s5pv310_irq_eint_mask(struct irq_data *data)
spin_unlock(&eint_lock);
}
static void s5pv310_irq_eint_unmask(struct irq_data *data)
static void exynos4_irq_eint_unmask(struct irq_data *data)
{
u32 mask;
......@@ -70,19 +70,19 @@ static void s5pv310_irq_eint_unmask(struct irq_data *data)
spin_unlock(&eint_lock);
}
static inline void s5pv310_irq_eint_ack(struct irq_data *data)
static inline void exynos4_irq_eint_ack(struct irq_data *data)
{
__raw_writel(eint_irq_to_bit(data->irq),
S5P_EINT_PEND(EINT_REG_NR(data->irq)));
}
static void s5pv310_irq_eint_maskack(struct irq_data *data)
static void exynos4_irq_eint_maskack(struct irq_data *data)
{
s5pv310_irq_eint_mask(data);
s5pv310_irq_eint_ack(data);
exynos4_irq_eint_mask(data);
exynos4_irq_eint_ack(data);
}
static int s5pv310_irq_eint_set_type(struct irq_data *data, unsigned int type)
static int exynos4_irq_eint_set_type(struct irq_data *data, unsigned int type)
{
int offs = EINT_OFFSET(data->irq);
int shift;
......@@ -145,19 +145,19 @@ static int s5pv310_irq_eint_set_type(struct irq_data *data, unsigned int type)
return 0;
}
static struct irq_chip s5pv310_irq_eint = {
.name = "s5pv310-eint",
.irq_mask = s5pv310_irq_eint_mask,
.irq_unmask = s5pv310_irq_eint_unmask,
.irq_mask_ack = s5pv310_irq_eint_maskack,
.irq_ack = s5pv310_irq_eint_ack,
.irq_set_type = s5pv310_irq_eint_set_type,
static struct irq_chip exynos4_irq_eint = {
.name = "exynos4-eint",
.irq_mask = exynos4_irq_eint_mask,
.irq_unmask = exynos4_irq_eint_unmask,
.irq_mask_ack = exynos4_irq_eint_maskack,
.irq_ack = exynos4_irq_eint_ack,
.irq_set_type = exynos4_irq_eint_set_type,
#ifdef CONFIG_PM
.irq_set_wake = s3c_irqext_wake,
#endif
};
/* s5pv310_irq_demux_eint
/* exynos4_irq_demux_eint
*
* This function demuxes the IRQ from from EINTs 16 to 31.
* It is designed to be inlined into the specific handler
......@@ -165,7 +165,7 @@ static struct irq_chip s5pv310_irq_eint = {
*
* Each EINT pend/mask registers handle eight of them.
*/
static inline void s5pv310_irq_demux_eint(unsigned int start)
static inline void exynos4_irq_demux_eint(unsigned int start)
{
unsigned int irq;
......@@ -182,13 +182,13 @@ static inline void s5pv310_irq_demux_eint(unsigned int start)
}
}
static void s5pv310_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
{
s5pv310_irq_demux_eint(IRQ_EINT(16));
s5pv310_irq_demux_eint(IRQ_EINT(24));
exynos4_irq_demux_eint(IRQ_EINT(16));
exynos4_irq_demux_eint(IRQ_EINT(24));
}
static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
{
u32 *irq_data = get_irq_data(irq);
struct irq_chip *chip = get_irq_chip(irq);
......@@ -203,27 +203,27 @@ static void s5pv310_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
chip->irq_unmask(&desc->irq_data);
}
int __init s5pv310_init_irq_eint(void)
int __init exynos4_init_irq_eint(void)
{
int irq;
for (irq = 0 ; irq <= 31 ; irq++) {
set_irq_chip(IRQ_EINT(irq), &s5pv310_irq_eint);
set_irq_chip(IRQ_EINT(irq), &exynos4_irq_eint);
set_irq_handler(IRQ_EINT(irq), handle_level_irq);
set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
}
set_irq_chained_handler(IRQ_EINT16_31, s5pv310_irq_demux_eint16_31);
set_irq_chained_handler(IRQ_EINT16_31, exynos4_irq_demux_eint16_31);
for (irq = 0 ; irq <= 15 ; irq++) {
eint0_15_data[irq] = IRQ_EINT(irq);
set_irq_data(s5pv310_get_irq_nr(irq), &eint0_15_data[irq]);
set_irq_chained_handler(s5pv310_get_irq_nr(irq),
s5pv310_irq_eint0_15);
set_irq_data(exynos4_get_irq_nr(irq), &eint0_15_data[irq]);
set_irq_chained_handler(exynos4_get_irq_nr(irq),
exynos4_irq_eint0_15);
}
return 0;
}
arch_initcall(s5pv310_init_irq_eint);
arch_initcall(exynos4_init_irq_eint);
arch/arm/mach-s5pv310/localtimer.c → arch/arm/mach-exynos4/localtimer.c
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-s5pv310/localtimer.c
/* linux/arch/arm/mach-exynos4/localtimer.c
*
* Cloned from linux/arch/arm/mach-realview/localtimer.c
*
......
arch/arm/mach-exynos4/mach-armlex4210.c 0 → 100644
浏览文件 @ 9ced9f03
/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/mmc/host.h>
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/smsc911x.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/exynos4.h>
#include <plat/gpio-cfg.h>
#include <plat/regs-serial.h>
#include <plat/regs-srom.h>
#include <plat/sdhci.h>
#include <mach/map.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8
#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG4 | \
S5PV210_UFCON_RXTRIG4)
static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
[0] = {
.hwport = 0,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
[1] = {
.hwport = 1,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
[2] = {
.hwport = 2,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
[3] = {
.hwport = 3,
.flags = 0,
.ucon = ARMLEX4210_UCON_DEFAULT,
.ulcon = ARMLEX4210_ULCON_DEFAULT,
.ufcon = ARMLEX4210_UFCON_DEFAULT,
},
};
static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_PERMANENT,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
.max_width = 8,
.host_caps = MMC_CAP_8_BIT_DATA,
#endif
};
static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_GPIO,
.ext_cd_gpio = EXYNOS4_GPX2(5),
.ext_cd_gpio_invert = 1,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
.max_width = 4,
};
static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
.cd_type = S3C_SDHCI_CD_PERMANENT,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
.max_width = 4,
};
static void __init armlex4210_sdhci_init(void)
{
s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
}
static void __init armlex4210_wlan_init(void)
{
/* enable */
s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
/* reset */
s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
/* wakeup */
s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
}
static struct resource armlex4210_smsc911x_resources[] = {
[0] = {
.start = EXYNOS4_PA_SROM_BANK(3),
.end = EXYNOS4_PA_SROM_BANK(3) + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_EINT(27),
.end = IRQ_EINT(27),
.flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH,
},
};
static struct smsc911x_platform_config smsc9215_config = {
.irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
.irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
.flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
.phy_interface = PHY_INTERFACE_MODE_MII,
.mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
};
static struct platform_device armlex4210_smsc911x = {
.name = "smsc911x",
.id = -1,
.num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources),
.resource = armlex4210_smsc911x_resources,
.dev = {
.platform_data = &smsc9215_config,
},
};
static struct platform_device *armlex4210_devices[] __initdata = {
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_rtc,
&s3c_device_wdt,
&exynos4_device_sysmmu,
&samsung_asoc_dma,
&armlex4210_smsc911x,
&exynos4_device_ahci,
};
static void __init armlex4210_smsc911x_init(void)
{
u32 cs1;
/* configure nCS1 width to 16 bits */
cs1 = __raw_readl(S5P_SROM_BW) &
~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
(0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
(1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
(1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
S5P_SROM_BW__NCS1__SHIFT;
__raw_writel(cs1, S5P_SROM_BW);
/* set timing for nCS1 suitable for ethernet chip */
__raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
(0x9 << S5P_SROM_BCX__TACP__SHIFT) |
(0xc << S5P_SROM_BCX__TCAH__SHIFT) |
(0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
(0x6 << S5P_SROM_BCX__TACC__SHIFT) |
(0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
(0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
}
static void __init armlex4210_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(armlex4210_uartcfgs,
ARRAY_SIZE(armlex4210_uartcfgs));
}
static void __init armlex4210_machine_init(void)
{
armlex4210_smsc911x_init();
armlex4210_sdhci_init();
armlex4210_wlan_init();
platform_add_devices(armlex4210_devices,
ARRAY_SIZE(armlex4210_devices));
}
MACHINE_START(ARMLEX4210, "ARMLEX4210")
/* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = exynos4_init_irq,
.map_io = armlex4210_map_io,
.init_machine = armlex4210_machine_init,
.timer = &exynos4_timer,
MACHINE_END
arch/arm/mach-exynos4/mach-nuri.c 0 → 100644
浏览文件 @ 9ced9f03
/*
* linux/arch/arm/mach-exynos4/mach-nuri.c
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/regulator/machine.h>
#include <linux/regulator/fixed.h>
#include <linux/mmc/host.h>
#include <linux/fb.h>
#include <linux/pwm_backlight.h>
#include <video/platform_lcd.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <plat/regs-serial.h>
#include <plat/exynos4.h>
#include <plat/cpu.h>
#include <plat/devs.h>
#include <plat/sdhci.h>
#include <mach/map.h>
/* Following are default values for UCON, ULCON and UFCON UART registers */
#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
S3C2410_UCON_RXILEVEL | \
S3C2410_UCON_TXIRQMODE | \
S3C2410_UCON_RXIRQMODE | \
S3C2410_UCON_RXFIFO_TOI | \
S3C2443_UCON_RXERR_IRQEN)
#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8
#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
S5PV210_UFCON_TXTRIG256 | \
S5PV210_UFCON_RXTRIG256)
enum fixed_regulator_id {
FIXED_REG_ID_MMC = 0,
};
static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
{
.hwport = 0,
.ucon = NURI_UCON_DEFAULT,
.ulcon = NURI_ULCON_DEFAULT,
.ufcon = NURI_UFCON_DEFAULT,
},
{
.hwport = 1,
.ucon = NURI_UCON_DEFAULT,
.ulcon = NURI_ULCON_DEFAULT,
.ufcon = NURI_UFCON_DEFAULT,
},
{
.hwport = 2,
.ucon = NURI_UCON_DEFAULT,
.ulcon = NURI_ULCON_DEFAULT,
.ufcon = NURI_UFCON_DEFAULT,
},
{
.hwport = 3,
.ucon = NURI_UCON_DEFAULT,
.ulcon = NURI_ULCON_DEFAULT,
.ufcon = NURI_UFCON_DEFAULT,
},
};
/* eMMC */
static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
.max_width = 8,
.host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_DISABLE | MMC_CAP_ERASE),
.cd_type = S3C_SDHCI_CD_PERMANENT,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
static struct regulator_consumer_supply emmc_supplies[] = {
REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"),
REGULATOR_SUPPLY("vmmc", "dw_mmc"),
};
static struct regulator_init_data emmc_fixed_voltage_init_data = {
.constraints = {
.name = "VMEM_VDD_2.8V",
.valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
.num_consumer_supplies = ARRAY_SIZE(emmc_supplies),
.consumer_supplies = emmc_supplies,
};
static struct fixed_voltage_config emmc_fixed_voltage_config = {
.supply_name = "MASSMEMORY_EN (inverted)",
.microvolts = 2800000,
.gpio = EXYNOS4_GPL1(1),
.enable_high = false,
.init_data = &emmc_fixed_voltage_init_data,
};
static struct platform_device emmc_fixed_voltage = {
.name = "reg-fixed-voltage",
.id = FIXED_REG_ID_MMC,
.dev = {
.platform_data = &emmc_fixed_voltage_config,
},
};
/* SD */
static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_DISABLE,
.ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */
.ext_cd_gpio_invert = 1,
.cd_type = S3C_SDHCI_CD_GPIO,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
/* WLAN */
static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
.max_width = 4,
.host_caps = MMC_CAP_4_BIT_DATA |
MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
.cd_type = S3C_SDHCI_CD_EXTERNAL,
.clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL,
};
static void __init nuri_sdhci_init(void)
{
s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
}
/* GPIO KEYS */
static struct gpio_keys_button nuri_gpio_keys_tables[] = {
{
.code = KEY_VOLUMEUP,
.gpio = EXYNOS4_GPX2(0), /* XEINT16 */
.desc = "gpio-keys: KEY_VOLUMEUP",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_VOLUMEDOWN,
.gpio = EXYNOS4_GPX2(1), /* XEINT17 */
.desc = "gpio-keys: KEY_VOLUMEDOWN",
.type = EV_KEY,
.active_low = 1,
.debounce_interval = 1,
}, {
.code = KEY_POWER,
.gpio = EXYNOS4_GPX2(7), /* XEINT23 */
.desc = "gpio-keys: KEY_POWER",
.type = EV_KEY,
.active_low = 1,
.wakeup = 1,
.debounce_interval = 1,
},
};
static struct gpio_keys_platform_data nuri_gpio_keys_data = {
.buttons = nuri_gpio_keys_tables,
.nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables),
};
static struct platform_device nuri_gpio_keys = {
.name = "gpio-keys",
.dev = {
.platform_data = &nuri_gpio_keys_data,
},
};
static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
{
int gpio = EXYNOS4_GPE1(5);
gpio_request(gpio, "LVDS_nSHDN");
gpio_direction_output(gpio, power);
gpio_free(gpio);
}
static int nuri_bl_init(struct device *dev)
{
int ret, gpio = EXYNOS4_GPE2(3);
ret = gpio_request(gpio, "LCD_LDO_EN");
if (!ret)
gpio_direction_output(gpio, 0);
return ret;
}
static int nuri_bl_notify(struct device *dev, int brightness)
{
if (brightness < 1)
brightness = 0;
gpio_set_value(EXYNOS4_GPE2(3), 1);
return brightness;
}
static void nuri_bl_exit(struct device *dev)
{
gpio_free(EXYNOS4_GPE2(3));
}
/* nuri pwm backlight */
static struct platform_pwm_backlight_data nuri_backlight_data = {
.pwm_id = 0,
.pwm_period_ns = 30000,
.max_brightness = 100,
.dft_brightness = 50,
.init = nuri_bl_init,
.notify = nuri_bl_notify,
.exit = nuri_bl_exit,
};
static struct platform_device nuri_backlight_device = {
.name = "pwm-backlight",
.id = -1,
.dev = {
.parent = &s3c_device_timer[0].dev,
.platform_data = &nuri_backlight_data,
},
};
static struct plat_lcd_data nuri_lcd_platform_data = {
.set_power = nuri_lcd_power_on,
};
static struct platform_device nuri_lcd_device = {
.name = "platform-lcd",
.id = -1,
.dev = {
.platform_data = &nuri_lcd_platform_data,
},
};
/* I2C1 */
static struct i2c_board_info i2c1_devs[] __initdata = {
/* Gyro, To be updated */
};
/* GPIO I2C 5 (PMIC) */
static struct i2c_board_info i2c5_devs[] __initdata = {
/* max8997, To be updated */
};
static struct platform_device *nuri_devices[] __initdata = {
/* Samsung Platform Devices */
&emmc_fixed_voltage,
&s3c_device_hsmmc0,
&s3c_device_hsmmc2,
&s3c_device_hsmmc3,
&s3c_device_wdt,
&s3c_device_timer[0],
/* NURI Devices */
&nuri_gpio_keys,
&nuri_lcd_device,
&nuri_backlight_device,
};
static void __init nuri_map_io(void)
{
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
s3c24xx_init_clocks(24000000);
s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
}
static void __init nuri_machine_init(void)
{
nuri_sdhci_init();
i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
/* Last */
platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
}
MACHINE_START(NURI, "NURI")
/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
.boot_params = S5P_PA_SDRAM + 0x100,
.init_irq = exynos4_init_irq,
.map_io = nuri_map_io,
.init_machine = nuri_machine_init,
.timer = &exynos4_timer,
MACHINE_END
arch/arm/mach-exynos4/mct.c 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-exynos4/pm.c 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-exynos4/setup-fimc.c 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pv310/setup-i2c0.c → arch/arm/mach-exynos4/setup-i2c0.c
浏览文件 @ 9ced9f03
/*
* linux/arch/arm/mach-s5pv310/setup-i2c0.c
* linux/arch/arm/mach-exynos4/setup-i2c0.c
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
......@@ -21,6 +21,6 @@ struct platform_device; /* don't need the contents */
void s3c_i2c0_cfg_gpio(struct platform_device *dev)
{
s3c_gpio_cfgall_range(S5PV310_GPD1(0), 2,
s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2,
S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
}
arch/arm/mach-exynos4/setup-keypad.c 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-exynos4/sleep.S 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s3c2440/mach-gta02.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s3c64xx/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s3c64xx/cpufreq.c
浏览文件 @ 9ced9f03
......@@ -181,7 +181,7 @@ static void __init s3c64xx_cpufreq_config_regulator(void)
}
#endif
static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
{
int ret;
struct cpufreq_frequency_table *freq;
......
arch/arm/mach-s5p64x0/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pc100/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pc100/gpiolib.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pv210/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pv210/Makefile
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pv210/gpiolib.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pv210/mach-aquila.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pv210/mach-goni.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pv210/setup-fimc.c 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/mach-s5pv310/Makefile 已删除 100644 → 0
浏览文件 @ 9b963f32
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/gpio.h 已删除 100644 → 0
浏览文件 @ 9b963f32
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/map.h 已删除 100644 → 0
浏览文件 @ 9b963f32
此差异已折叠。
arch/arm/mach-s5pv310/include/mach/regs-pmu.h 已删除 100644 → 0
浏览文件 @ 9b963f32
此差异已折叠。
arch/arm/mm/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s3c24xx/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/Makefile
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/cpu.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/dev-csis0.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/dev-csis1.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/dev-fimc3.c 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/include/plat/camport.h 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/include/plat/exynos4.h 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/include/plat/s5p-time.h 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/include/plat/s5pv310.h 已删除 100644 → 0
浏览文件 @ 9b963f32
此差异已折叠。
arch/arm/plat-s5p/irq-gpioint.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/s5p-time.c 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/setup-mipiphy.c 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-s5p/sysmmu.c
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-samsung/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-samsung/Makefile
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-samsung/dev-pwm.c 0 → 100644
浏览文件 @ 9ced9f03
此差异已折叠。
arch/arm/plat-samsung/pwm.c
浏览文件 @ 9ced9f03
此差异已折叠。
drivers/mtd/onenand/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
drivers/tty/serial/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
sound/soc/samsung/Kconfig
浏览文件 @ 9ced9f03
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或