ARM: dts: imx7: use 3 PWM cells

The PWM driver has now capability to specify the PWM polarity
which is e.g. for backlight control. Allow to make use of PWM
polarity by specifying pwm-cells to be 3 in the base dt.
Signed-off-by: NStefan Agner <stefan@agner.ch>
Reviewed-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

arch/arm/boot/dts/imx7-colibri.dtsi

@@ -43,7 +43,7 @@
 / {
 	bl: backlight {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 	};
 
 	reg_module_3v3: regulator-module-3v3 {

arch/arm/boot/dts/imx7d-nitrogen7.dts

@@ -67,7 +67,7 @@
 
 	backlight-j20 {
 		compatible = "pwm-backlight";
-		pwms = <&pwm1 0 5000000>;
+		pwms = <&pwm1 0 5000000 0>;
 		brightness-levels = <0 4 8 16 32 64 128 255>;
 		default-brightness-level = <6>;
 		status = "okay";

arch/arm/boot/dts/imx7s.dtsi

@@ -635,7 +635,7 @@
 				clocks = <&clks IMX7D_PWM1_ROOT_CLK>,
 					 <&clks IMX7D_PWM1_ROOT_CLK>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -646,7 +646,7 @@
 				clocks = <&clks IMX7D_PWM2_ROOT_CLK>,
 					 <&clks IMX7D_PWM2_ROOT_CLK>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -657,7 +657,7 @@
 				clocks = <&clks IMX7D_PWM3_ROOT_CLK>,
 					 <&clks IMX7D_PWM3_ROOT_CLK>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};
 
@@ -668,7 +668,7 @@
 				clocks = <&clks IMX7D_PWM4_ROOT_CLK>,
 					 <&clks IMX7D_PWM4_ROOT_CLK>;
 				clock-names = "ipg", "per";
-				#pwm-cells = <2>;
+				#pwm-cells = <3>;
 				status = "disabled";
 			};