ARM: entry: move IRQ tracing exit into svc_exit

The IRQ tracing exit path is much the same between all SVC mode
exits, so move this into the svc_exit macro.  Use a macro parameter
to identify the IRQ case, which is the only different case there is.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

arch/arm/kernel/entry-armv.S

@@ -197,13 +197,6 @@ __dabt_svc:
 	@ IRQs off again before pulling preserved data off the stack
 	@
 	disable_irq_notrace
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r5, #PSR_I_BIT
-	bleq	trace_hardirqs_on
-	tst	r5, #PSR_I_BIT
-	blne	trace_hardirqs_off
-#endif
 	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__dabt_svc)
@@ -223,12 +216,7 @@ __irq_svc:
 	blne	svc_preempt
 #endif
 
-#ifdef CONFIG_TRACE_IRQFLAGS
-	@ The parent context IRQs must have been enabled to get here in
-	@ the first place, so there's no point checking the PSR I bit.
-	bl	trace_hardirqs_on
-#endif
-	svc_exit r5				@ return from exception
+	svc_exit r5, irq = 1			@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__irq_svc)
 
@@ -305,12 +293,6 @@ __und_svc_finish:
 	@ restore SPSR and restart the instruction
 	@
 	ldr	r5, [sp, #S_PSR]		@ Get SVC cpsr
-#ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r5, #PSR_I_BIT
-	bleq	trace_hardirqs_on
-	tst	r5, #PSR_I_BIT
-	blne	trace_hardirqs_off
-#endif
 	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__und_svc)
@@ -325,13 +307,6 @@ __pabt_svc:
 	@ IRQs off again before pulling preserved data off the stack
 	@
 	disable_irq_notrace
-
-#ifdef CONFIG_TRACE_IRQFLAGS
-	tst	r5, #PSR_I_BIT
-	bleq	trace_hardirqs_on
-	tst	r5, #PSR_I_BIT
-	blne	trace_hardirqs_off
-#endif
 	svc_exit r5				@ return from exception
  UNWIND(.fnend		)
 ENDPROC(__pabt_svc)

arch/arm/kernel/entry-header.S

@@ -74,7 +74,21 @@
 	.endm
 
 #ifndef CONFIG_THUMB2_KERNEL
-	.macro	svc_exit, rpsr
+	.macro	svc_exit, rpsr, irq = 0
+	.if	\irq != 0
+#ifdef CONFIG_TRACE_IRQFLAGS
+	@ The parent context IRQs must have been enabled to get here in
+	@ the first place, so there's no point checking the PSR I bit.
+	bl	trace_hardirqs_on
+#endif
+	.else
+#ifdef CONFIG_TRACE_IRQFLAGS
+	tst	\rpsr, #PSR_I_BIT
+	bleq	trace_hardirqs_on
+	tst	\rpsr, #PSR_I_BIT
+	blne	trace_hardirqs_off
+#endif
+	.endif
 	msr	spsr_cxsf, \rpsr
 #if defined(CONFIG_CPU_V6)
 	ldr	r0, [sp]
@@ -120,7 +134,21 @@
 	mov	pc, \reg
 	.endm
 #else	/* CONFIG_THUMB2_KERNEL */
-	.macro	svc_exit, rpsr
+	.macro	svc_exit, rpsr, irq = 0
+	.if	\irq != 0
+#ifdef CONFIG_TRACE_IRQFLAGS
+	@ The parent context IRQs must have been enabled to get here in
+	@ the first place, so there's no point checking the PSR I bit.
+	bl	trace_hardirqs_on
+#endif
+	.else
+#ifdef CONFIG_TRACE_IRQFLAGS
+	tst	\rpsr, #PSR_I_BIT
+	bleq	trace_hardirqs_on
+	tst	\rpsr, #PSR_I_BIT
+	blne	trace_hardirqs_off
+#endif
+	.endif
 	ldr	lr, [sp, #S_SP]			@ top of the stack
 	ldrd	r0, r1, [sp, #S_LR]		@ calling lr and pc
 	clrex					@ clear the exclusive monitor