regulator: qcom_spmi: Add missing braces for aligned code

drivers/regulator/qcom_spmi-regulator.c:751:3-50: code aligned
with following code on line 753
drivers/regulator/qcom_spmi-regulator.c:584:3-41: code aligned
with following code on line 587

These lines where missing braces causing the break to always
be executed even when it shouldn't be. Fix it.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Reviewed-by: NAndy Gross <agross@codeaurora.org>
Signed-off-by: NMark Brown <broonie@kernel.org>

drivers/regulator/qcom_spmi-regulator.c

@@ -580,11 +580,12 @@ static int spmi_regulator_select_voltage_same_range(struct spmi_regulator *vreg,
 	*selector = 0;
 	for (i = 0; i < vreg->set_points->count; i++) {
 		if (uV >= vreg->set_points->range[i].set_point_min_uV
-		    && uV <= vreg->set_points->range[i].set_point_max_uV)
+		    && uV <= vreg->set_points->range[i].set_point_max_uV) {
 			*selector +=
 			    (uV - vreg->set_points->range[i].set_point_min_uV)
 				/ vreg->set_points->range[i].step_uV;
 			break;
+		}
 
 		*selector += vreg->set_points->range[i].n_voltages;
 	}
@@ -743,10 +744,11 @@ static int spmi_regulator_common_list_voltage(struct regulator_dev *rdev,
 		return 0;
 
 	for (i = 0; i < vreg->set_points->count; i++) {
-		if (selector < vreg->set_points->range[i].n_voltages)
+		if (selector < vreg->set_points->range[i].n_voltages) {
 			uV = selector * vreg->set_points->range[i].step_uV
 				+ vreg->set_points->range[i].set_point_min_uV;
 			break;
+		}
 
 		selector -= vreg->set_points->range[i].n_voltages;
 	}