ARM: nomadik: move l2x0 setup to device tree

The cache setup magic value in the Nomadik machine is plain wrong,
the correct settings can be done using device tree in accordance
with the settings from ST's own port.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

arch/arm/boot/dts/ste-nomadik-stn8815.dtsi

@@ -21,6 +21,13 @@
 		interrupts = <30>;
 		cache-unified;
 		cache-level = <2>;
+		cache-size = <131072>;
+		cache-sets = <512>;
+		cache-line-size = <32>;
+		/* At full speed latency must be >=2 */
+		arm,tag-latency = <2>;
+		arm,data-latency = <2 2>;
+		arm,dirty-latency = <2>;
 	};
 
 	mtu0: mtu@101e2000 {

arch/arm/mach-nomadik/cpu-8815.c

@@ -114,9 +114,8 @@ static const char * cpu8815_board_compat[] = {
 };
 
 DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
-	/* At full speed latency must be >=2, so 0x249 in low bits */
-	.l2c_aux_val	= 0x00700249,
-	.l2c_aux_mask	= 0xfe0fefff,
+	.l2c_aux_val	= 0,
+	.l2c_aux_mask	= ~0,
 	.map_io		= cpu8815_map_io,
 	.restart	= cpu8815_restart,
 	.dt_compat      = cpu8815_board_compat,