提交 95cc44a0 编写于 作者: V Vladimir Murzin 提交者: Tomi Valkeinen

fbdev: vfb: add option for video mode

Make vfb a bit more flexible in sense what it can represent and allow
the end user to specify video mode parameters via newly introduced module
option "mode". Since it is test module it is still up to the end user
to make sure there is enough memory to satisfy video mode settings.
Signed-off-by: NVladimir Murzin <vladimir.murzin@arm.com>
[tomi.valkeinen@ti.com: constified vfb_default]
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
上级 cf957ccc
......@@ -37,6 +37,10 @@ static u_long videomemorysize = VIDEOMEMSIZE;
module_param(videomemorysize, ulong, 0);
MODULE_PARM_DESC(videomemorysize, "RAM available to frame buffer (in bytes)");
static char *mode_option = NULL;
module_param(mode_option, charp, 0);
MODULE_PARM_DESC(mode_option, "Preferred video mode (e.g. 640x480-8@60)");
/**********************************************************************
*
* Memory management
......@@ -86,26 +90,17 @@ static void rvfree(void *mem, unsigned long size)
vfree(mem);
}
static struct fb_var_screeninfo vfb_default = {
static const struct fb_videomode vfb_default = {
.xres = 640,
.yres = 480,
.xres_virtual = 640,
.yres_virtual = 480,
.bits_per_pixel = 8,
.red = { 0, 8, 0 },
.green = { 0, 8, 0 },
.blue = { 0, 8, 0 },
.activate = FB_ACTIVATE_TEST,
.height = -1,
.width = -1,
.pixclock = 20000,
.left_margin = 64,
.right_margin = 64,
.upper_margin = 32,
.lower_margin = 32,
.hsync_len = 64,
.vsync_len = 2,
.vmode = FB_VMODE_NONINTERLACED,
.pixclock = 20000,
.left_margin = 64,
.right_margin = 64,
.upper_margin = 32,
.lower_margin = 32,
.hsync_len = 64,
.vsync_len = 2,
.vmode = FB_VMODE_NONINTERLACED,
};
static struct fb_fix_screeninfo vfb_fix = {
......@@ -479,6 +474,8 @@ static int __init vfb_setup(char *options)
/* Test disable for backwards compatibility */
if (!strcmp(this_opt, "disable"))
vfb_enable = 0;
else
mode_option = this_opt;
}
return 1;
}
......@@ -506,11 +503,13 @@ static int vfb_probe(struct platform_device *dev)
info->screen_base = (char __iomem *)videomemory;
info->fbops = &vfb_ops;
retval = fb_find_mode(&info->var, info, NULL,
NULL, 0, NULL, 8);
if (!fb_find_mode(&info->var, info, mode_option,
NULL, 0, &vfb_default, 8)){
fb_err(info, "Unable to find usable video mode.\n");
retval = -EINVAL;
goto err1;
}
if (!retval || (retval == 4))
info->var = vfb_default;
vfb_fix.smem_start = (unsigned long) videomemory;
vfb_fix.smem_len = videomemorysize;
info->fix = vfb_fix;
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册