Merge git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6: (95 commits)
  ide-tape: remove idetape_config_t typedef
  ide-tape: remove mtio.h related comments
  ide-tape: make function name more accurate
  ide-tape: remove unused sense packet commands.
  ide-tape: use generic byteorder macros
  ide-tape: remove EXPERIMENTAL driver status
  ide-tape: use generic scsi commands
  ide-tape: remove struct idetape_block_size_page_t
  ide-tape: remove structs os_partition_t, os_dat_entry_t, os_dat_t
  ide-tape: remove struct idetape_parameter_block_descriptor_t
  ide-tape: remove struct idetape_medium_partition_page_t
  ide-tape: remove struct idetape_data_compression_page_t
  ide-tape: remove struct idetape_inquiry_result_t
  ide-tape: remove struct idetape_capabilities_page_t
  ide-tape: remove IDETAPE_DEBUG_BUGS
  ide-tape: remove IDETAPE_DEBUG_INFO
  ide-tape: dump gcw fields on error in idetape_identify_device()
  ide-tape: remove struct idetape_mode_parameter_header_t
  ide-tape: remove struct idetape_request_sense_result_t
  ide-tape: remove dead code
  ...

Documentation/ide/ChangeLog.ide-tape.1995-2002

+/*
+ * Ver 0.1   Nov  1 95   Pre-working code :-)
+ * Ver 0.2   Nov 23 95   A short backup (few megabytes) and restore procedure
+ *                        was successful ! (Using tar cvf ... on the block
+ *                        device interface).
+ *                       A longer backup resulted in major swapping, bad
+ *                        overall Linux performance and eventually failed as
+ *                        we received non serial read-ahead requests from the
+ *                        buffer cache.
+ * Ver 0.3   Nov 28 95   Long backups are now possible, thanks to the
+ *                        character device interface. Linux's responsiveness
+ *                        and performance doesn't seem to be much affected
+ *                        from the background backup procedure.
+ *                       Some general mtio.h magnetic tape operations are
+ *                        now supported by our character device. As a result,
+ *                        popular tape utilities are starting to work with
+ *                        ide tapes :-)
+ *                       The following configurations were tested:
+ *                       1. An IDE ATAPI TAPE shares the same interface
+ *                        and irq with an IDE ATAPI CDROM.
+ *                       2. An IDE ATAPI TAPE shares the same interface
+ *                        and irq with a normal IDE disk.
+ *                        Both configurations seemed to work just fine !
+ *                        However, to be on the safe side, it is meanwhile
+ *                        recommended to give the IDE TAPE its own interface
+ *                        and irq.
+ *                       The one thing which needs to be done here is to
+ *                        add a "request postpone" feature to ide.c,
+ *                        so that we won't have to wait for the tape to finish
+ *                        performing a long media access (DSC) request (such
+ *                        as a rewind) before we can access the other device
+ *                        on the same interface. This effect doesn't disturb
+ *                        normal operation most of the time because read/write
+ *                        requests are relatively fast, and once we are
+ *                        performing one tape r/w request, a lot of requests
+ *                        from the other device can be queued and ide.c will
+ *			  service all of them after this single tape request.
+ * Ver 1.0   Dec 11 95   Integrated into Linux 1.3.46 development tree.
+ *                       On each read / write request, we now ask the drive
+ *                        if we can transfer a constant number of bytes
+ *                        (a parameter of the drive) only to its buffers,
+ *                        without causing actual media access. If we can't,
+ *                        we just wait until we can by polling the DSC bit.
+ *                        This ensures that while we are not transferring
+ *                        more bytes than the constant referred to above, the
+ *                        interrupt latency will not become too high and
+ *                        we won't cause an interrupt timeout, as happened
+ *                        occasionally in the previous version.
+ *                       While polling for DSC, the current request is
+ *                        postponed and ide.c is free to handle requests from
+ *                        the other device. This is handled transparently to
+ *                        ide.c. The hwgroup locking method which was used
+ *                        in the previous version was removed.
+ *                       Use of new general features which are provided by
+ *                        ide.c for use with atapi devices.
+ *                        (Programming done by Mark Lord)
+ *                       Few potential bug fixes (Again, suggested by Mark)
+ *                       Single character device data transfers are now
+ *                        not limited in size, as they were before.
+ *                       We are asking the tape about its recommended
+ *                        transfer unit and send a larger data transfer
+ *                        as several transfers of the above size.
+ *                        For best results, use an integral number of this
+ *                        basic unit (which is shown during driver
+ *                        initialization). I will soon add an ioctl to get
+ *                        this important parameter.
+ *                       Our data transfer buffer is allocated on startup,
+ *                        rather than before each data transfer. This should
+ *                        ensure that we will indeed have a data buffer.
+ * Ver 1.1   Dec 14 95   Fixed random problems which occurred when the tape
+ *                        shared an interface with another device.
+ *                        (poll_for_dsc was a complete mess).
+ *                       Removed some old (non-active) code which had
+ *                        to do with supporting buffer cache originated
+ *                        requests.
+ *                       The block device interface can now be opened, so
+ *                        that general ide driver features like the unmask
+ *                        interrupts flag can be selected with an ioctl.
+ *                        This is the only use of the block device interface.
+ *                       New fast pipelined operation mode (currently only on
+ *                        writes). When using the pipelined mode, the
+ *                        throughput can potentially reach the maximum
+ *                        tape supported throughput, regardless of the
+ *                        user backup program. On my tape drive, it sometimes
+ *                        boosted performance by a factor of 2. Pipelined
+ *                        mode is enabled by default, but since it has a few
+ *                        downfalls as well, you may want to disable it.
+ *                        A short explanation of the pipelined operation mode
+ *                        is available below.
+ * Ver 1.2   Jan  1 96   Eliminated pipelined mode race condition.
+ *                       Added pipeline read mode. As a result, restores
+ *                        are now as fast as backups.
+ *                       Optimized shared interface behavior. The new behavior
+ *                        typically results in better IDE bus efficiency and
+ *                        higher tape throughput.
+ *                       Pre-calculation of the expected read/write request
+ *                        service time, based on the tape's parameters. In
+ *                        the pipelined operation mode, this allows us to
+ *                        adjust our polling frequency to a much lower value,
+ *                        and thus to dramatically reduce our load on Linux,
+ *                        without any decrease in performance.
+ *                       Implemented additional mtio.h operations.
+ *                       The recommended user block size is returned by
+ *                        the MTIOCGET ioctl.
+ *                       Additional minor changes.
+ * Ver 1.3   Feb  9 96   Fixed pipelined read mode bug which prevented the
+ *                        use of some block sizes during a restore procedure.
+ *                       The character device interface will now present a
+ *                        continuous view of the media - any mix of block sizes
+ *                        during a backup/restore procedure is supported. The
+ *                        driver will buffer the requests internally and
+ *                        convert them to the tape's recommended transfer
+ *                        unit, making performance almost independent of the
+ *                        chosen user block size.
+ *                       Some improvements in error recovery.
+ *                       By cooperating with ide-dma.c, bus mastering DMA can
+ *                        now sometimes be used with IDE tape drives as well.
+ *                        Bus mastering DMA has the potential to dramatically
+ *                        reduce the CPU's overhead when accessing the device,
+ *                        and can be enabled by using hdparm -d1 on the tape's
+ *                        block device interface. For more info, read the
+ *                        comments in ide-dma.c.
+ * Ver 1.4   Mar 13 96   Fixed serialize support.
+ * Ver 1.5   Apr 12 96   Fixed shared interface operation, broken in 1.3.85.
+ *                       Fixed pipelined read mode inefficiency.
+ *                       Fixed nasty null dereferencing bug.
+ * Ver 1.6   Aug 16 96   Fixed FPU usage in the driver.
+ *                       Fixed end of media bug.
+ * Ver 1.7   Sep 10 96   Minor changes for the CONNER CTT8000-A model.
+ * Ver 1.8   Sep 26 96   Attempt to find a better balance between good
+ *                        interactive response and high system throughput.
+ * Ver 1.9   Nov  5 96   Automatically cross encountered filemarks rather
+ *                        than requiring an explicit FSF command.
+ *                       Abort pending requests at end of media.
+ *                       MTTELL was sometimes returning incorrect results.
+ *                       Return the real block size in the MTIOCGET ioctl.
+ *                       Some error recovery bug fixes.
+ * Ver 1.10  Nov  5 96   Major reorganization.
+ *                       Reduced CPU overhead a bit by eliminating internal
+ *                        bounce buffers.
+ *                       Added module support.
+ *                       Added multiple tape drives support.
+ *                       Added partition support.
+ *                       Rewrote DSC handling.
+ *                       Some portability fixes.
+ *                       Removed ide-tape.h.
+ *                       Additional minor changes.
+ * Ver 1.11  Dec  2 96   Bug fix in previous DSC timeout handling.
+ *                       Use ide_stall_queue() for DSC overlap.
+ *                       Use the maximum speed rather than the current speed
+ *                        to compute the request service time.
+ * Ver 1.12  Dec  7 97   Fix random memory overwriting and/or last block data
+ *                        corruption, which could occur if the total number
+ *                        of bytes written to the tape was not an integral
+ *                        number of tape blocks.
+ *                       Add support for INTERRUPT DRQ devices.
+ * Ver 1.13  Jan  2 98   Add "speed == 0" work-around for HP COLORADO 5GB
+ * Ver 1.14  Dec 30 98   Partial fixes for the Sony/AIWA tape drives.
+ *                       Replace cli()/sti() with hwgroup spinlocks.
+ * Ver 1.15  Mar 25 99   Fix SMP race condition by replacing hwgroup
+ *                        spinlock with private per-tape spinlock.
+ * Ver 1.16  Sep  1 99   Add OnStream tape support.
+ *                       Abort read pipeline on EOD.
+ *                       Wait for the tape to become ready in case it returns
+ *                        "in the process of becoming ready" on open().
+ *                       Fix zero padding of the last written block in
+ *                        case the tape block size is larger than PAGE_SIZE.
+ *                       Decrease the default disconnection time to tn.
+ * Ver 1.16e Oct  3 99   Minor fixes.
+ * Ver 1.16e1 Oct 13 99  Patches by Arnold Niessen,
+ *                          niessen@iae.nl / arnold.niessen@philips.com
+ *                   GO-1)  Undefined code in idetape_read_position
+ *				according to Gadi's email
+ *                   AJN-1) Minor fix asc == 11 should be asc == 0x11
+ *                               in idetape_issue_packet_command (did effect
+ *                               debugging output only)
+ *                   AJN-2) Added more debugging output, and
+ *                              added ide-tape: where missing. I would also
+ *				like to add tape->name where possible
+ *                   AJN-3) Added different debug_level's
+ *                              via /proc/ide/hdc/settings
+ *				"debug_level" determines amount of debugging output;
+ *				can be changed using /proc/ide/hdx/settings
+ *				0 : almost no debugging output
+ *				1 : 0+output errors only
+ *				2 : 1+output all sensekey/asc
+ *				3 : 2+follow all chrdev related procedures
+ *				4 : 3+follow all procedures
+ *				5 : 4+include pc_stack rq_stack info
+ *				6 : 5+USE_COUNT updates
+ *                   AJN-4) Fixed timeout for retension in idetape_queue_pc_tail
+ *				from 5 to 10 minutes
+ *                   AJN-5) Changed maximum number of blocks to skip when
+ *                              reading tapes with multiple consecutive write
+ *                              errors from 100 to 1000 in idetape_get_logical_blk
+ *                   Proposed changes to code:
+ *                   1) output "logical_blk_num" via /proc
+ *                   2) output "current_operation" via /proc
+ *                   3) Either solve or document the fact that `mt rewind' is
+ *                      required after reading from /dev/nhtx to be
+ *			able to rmmod the idetape module;
+ *			Also, sometimes an application finishes but the
+ *			device remains `busy' for some time. Same cause ?
+ *                   Proposed changes to release-notes:
+ *		     4) write a simple `quickstart' section in the
+ *                      release notes; I volunteer if you don't want to
+ *		     5) include a pointer to video4linux in the doc
+ *                      to stimulate video applications
+ *                   6) release notes lines 331 and 362: explain what happens
+ *			if the application data rate is higher than 1100 KB/s;
+ *			similar approach to lower-than-500 kB/s ?
+ *		     7) 6.6 Comparison; wouldn't it be better to allow different
+ *			strategies for read and write ?
+ *			Wouldn't it be better to control the tape buffer
+ *			contents instead of the bandwidth ?
+ *		     8) line 536: replace will by would (if I understand
+ *			this section correctly, a hypothetical and unwanted situation
+ *			 is being described)
+ * Ver 1.16f Dec 15 99   Change place of the secondary OnStream header frames.
+ * Ver 1.17  Nov 2000 / Jan 2001  Marcel Mol, marcel@mesa.nl
+ *			- Add idetape_onstream_mode_sense_tape_parameter_page
+ *			  function to get tape capacity in frames: tape->capacity.
+ *			- Add support for DI-50 drives( or any DI- drive).
+ *			- 'workaround' for read error/blank block around block 3000.
+ *			- Implement Early warning for end of media for Onstream.
+ *			- Cosmetic code changes for readability.
+ *			- Idetape_position_tape should not use SKIP bit during
+ *			  Onstream read recovery.
+ *			- Add capacity, logical_blk_num and first/last_frame_position
+ *			  to /proc/ide/hd?/settings.
+ *			- Module use count was gone in the Linux 2.4 driver.
+ * Ver 1.17a Apr 2001 Willem Riede osst@riede.org
+ *			- Get drive's actual block size from mode sense block descriptor
+ *			- Limit size of pipeline
+ * Ver 1.17b Oct 2002   Alan Stern <stern@rowland.harvard.edu>
+ *			Changed IDETAPE_MIN_PIPELINE_STAGES to 1 and actually used
+ *			 it in the code!
+ *			Actually removed aborted stages in idetape_abort_pipeline
+ *			 instead of just changing the command code.
+ *			Made the transfer byte count for Request Sense equal to the
+ *			 actual length of the data transfer.
+ *			Changed handling of partial data transfers: they do not
+ *			 cause DMA errors.
+ *			Moved initiation of DMA transfers to the correct place.
+ *			Removed reference to unallocated memory.
+ *			Made __idetape_discard_read_pipeline return the number of
+ *			 sectors skipped, not the number of stages.
+ *			Replaced errant kfree() calls with __idetape_kfree_stage().
+ *			Fixed off-by-one error in testing the pipeline length.
+ *			Fixed handling of filemarks in the read pipeline.
+ *			Small code optimization for MTBSF and MTBSFM ioctls.
+ *			Don't try to unlock the door during device close if is
+ *			 already unlocked!
+ *			Cosmetic fixes to miscellaneous debugging output messages.
+ *			Set the minimum /proc/ide/hd?/settings values for "pipeline",
+ *			 "pipeline_min", and "pipeline_max" to 1.
+ */

Documentation/ide/ide-tape.txt

+/*
+ * IDE ATAPI streaming tape driver.
+ *
+ * This driver is a part of the Linux ide driver.
+ *
+ * The driver, in co-operation with ide.c, basically traverses the
+ * request-list for the block device interface. The character device
+ * interface, on the other hand, creates new requests, adds them
+ * to the request-list of the block device, and waits for their completion.
+ *
+ * Pipelined operation mode is now supported on both reads and writes.
+ *
+ * The block device major and minor numbers are determined from the
+ * tape's relative position in the ide interfaces, as explained in ide.c.
+ *
+ * The character device interface consists of the following devices:
+ *
+ * ht0		major 37, minor 0	first  IDE tape, rewind on close.
+ * ht1		major 37, minor 1	second IDE tape, rewind on close.
+ * ...
+ * nht0		major 37, minor 128	first  IDE tape, no rewind on close.
+ * nht1		major 37, minor 129	second IDE tape, no rewind on close.
+ * ...
+ *
+ * The general magnetic tape commands compatible interface, as defined by
+ * include/linux/mtio.h, is accessible through the character device.
+ *
+ * General ide driver configuration options, such as the interrupt-unmask
+ * flag, can be configured by issuing an ioctl to the block device interface,
+ * as any other ide device.
+ *
+ * Our own ide-tape ioctl's can be issued to either the block device or
+ * the character device interface.
+ *
+ * Maximal throughput with minimal bus load will usually be achieved in the
+ * following scenario:
+ *
+ *	1.	ide-tape is operating in the pipelined operation mode.
+ *	2.	No buffering is performed by the user backup program.
+ *
+ * Testing was done with a 2 GB CONNER CTMA 4000 IDE ATAPI Streaming Tape Drive.
+ *
+ * Here are some words from the first releases of hd.c, which are quoted
+ * in ide.c and apply here as well:
+ *
+ * | Special care is recommended.  Have Fun!
+ *
+ *
+ * An overview of the pipelined operation mode.
+ *
+ * In the pipelined write mode, we will usually just add requests to our
+ * pipeline and return immediately, before we even start to service them. The
+ * user program will then have enough time to prepare the next request while
+ * we are still busy servicing previous requests. In the pipelined read mode,
+ * the situation is similar - we add read-ahead requests into the pipeline,
+ * before the user even requested them.
+ *
+ * The pipeline can be viewed as a "safety net" which will be activated when
+ * the system load is high and prevents the user backup program from keeping up
+ * with the current tape speed. At this point, the pipeline will get
+ * shorter and shorter but the tape will still be streaming at the same speed.
+ * Assuming we have enough pipeline stages, the system load will hopefully
+ * decrease before the pipeline is completely empty, and the backup program
+ * will be able to "catch up" and refill the pipeline again.
+ *
+ * When using the pipelined mode, it would be best to disable any type of
+ * buffering done by the user program, as ide-tape already provides all the
+ * benefits in the kernel, where it can be done in a more efficient way.
+ * As we will usually not block the user program on a request, the most
+ * efficient user code will then be a simple read-write-read-... cycle.
+ * Any additional logic will usually just slow down the backup process.
+ *
+ * Using the pipelined mode, I get a constant over 400 KBps throughput,
+ * which seems to be the maximum throughput supported by my tape.
+ *
+ * However, there are some downfalls:
+ *
+ *	1.	We use memory (for data buffers) in proportional to the number
+ *		of pipeline stages (each stage is about 26 KB with my tape).
+ *	2.	In the pipelined write mode, we cheat and postpone error codes
+ *		to the user task. In read mode, the actual tape position
+ *		will be a bit further than the last requested block.
+ *
+ * Concerning (1):
+ *
+ *	1.	We allocate stages dynamically only when we need them. When
+ *		we don't need them, we don't consume additional memory. In
+ *		case we can't allocate stages, we just manage without them
+ *		(at the expense of decreased throughput) so when Linux is
+ *		tight in memory, we will not pose additional difficulties.
+ *
+ *	2.	The maximum number of stages (which is, in fact, the maximum
+ *		amount of memory) which we allocate is limited by the compile
+ *		time parameter IDETAPE_MAX_PIPELINE_STAGES.
+ *
+ *	3.	The maximum number of stages is a controlled parameter - We
+ *		don't start from the user defined maximum number of stages
+ *		but from the lower IDETAPE_MIN_PIPELINE_STAGES (again, we
+ *		will not even allocate this amount of stages if the user
+ *		program can't handle the speed). We then implement a feedback
+ *		loop which checks if the pipeline is empty, and if it is, we
+ *		increase the maximum number of stages as necessary until we
+ *		reach the optimum value which just manages to keep the tape
+ *		busy with minimum allocated memory or until we reach
+ *		IDETAPE_MAX_PIPELINE_STAGES.
+ *
+ * Concerning (2):
+ *
+ *	In pipelined write mode, ide-tape can not return accurate error codes
+ *	to the user program since we usually just add the request to the
+ *      pipeline without waiting for it to be serviced. In case an error
+ *      occurs, I will report it on the next user request.
+ *
+ *	In the pipelined read mode, subsequent read requests or forward
+ *	filemark spacing will perform correctly, as we preserve all blocks
+ *	and filemarks which we encountered during our excess read-ahead.
+ *
+ *	For accurate tape positioning and error reporting, disabling
+ *	pipelined mode might be the best option.
+ *
+ * You can enable/disable/tune the pipelined operation mode by adjusting
+ * the compile time parameters below.
+ *
+ *
+ *	Possible improvements.
+ *
+ *	1.	Support for the ATAPI overlap protocol.
+ *
+ *		In order to maximize bus throughput, we currently use the DSC
+ *		overlap method which enables ide.c to service requests from the
+ *		other device while the tape is busy executing a command. The
+ *		DSC overlap method involves polling the tape's status register
+ *		for the DSC bit, and servicing the other device while the tape
+ *		isn't ready.
+ *
+ *		In the current QIC development standard (December 1995),
+ *		it is recommended that new tape drives will *in addition*
+ *		implement the ATAPI overlap protocol, which is used for the
+ *		same purpose - efficient use of the IDE bus, but is interrupt
+ *		driven and thus has much less CPU overhead.
+ *
+ *		ATAPI overlap is likely to be supported in most new ATAPI
+ *		devices, including new ATAPI cdroms, and thus provides us
+ *		a method by which we can achieve higher throughput when
+ *		sharing a (fast) ATA-2 disk with any (slow) new ATAPI device.
+ */

drivers/ide/Kconfig

@@ -216,8 +216,7 @@ config BLK_DEV_IDECD_VERBOSE_ERRORS
 	  memory, though.
 
 config BLK_DEV_IDETAPE
-	tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL
+	tristate "Include IDE/ATAPI TAPE support"
 	help
 	  If you have an IDE tape drive using the ATAPI protocol, say Y.
 	  ATAPI is a newer protocol used by IDE tape and CD-ROM drives,

drivers/ide/arm/bast-ide.c

@@ -28,8 +28,10 @@ static int __init
 bastide_register(unsigned int base, unsigned int aux, int irq,
 		 ide_hwif_t **hwif)
 {
+	ide_hwif_t *hwif;
 	hw_regs_t hw;
 	int i;
+	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	memset(&hw, 0, sizeof(hw));
 
@@ -44,8 +46,24 @@ bastide_register(unsigned int base, unsigned int aux, int irq,
 	hw.io_ports[IDE_CONTROL_OFFSET] = aux + (6 * 0x20);
 	hw.irq = irq;
 
-	ide_register_hw(&hw, NULL, hwif);
+	hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+	if (hwif == NULL)
+		goto out;
 
+	i = hwif->index;
+
+	if (hwif->present)
+		ide_unregister(i, 0, 0);
+	else if (!hwif->hold)
+		ide_init_port_data(hwif, i);
+
+	ide_init_port_hw(hwif, &hw);
+	hwif->quirkproc = NULL;
+
+	idx[0] = i;
+
+	ide_device_add(idx, NULL);
+out:
 	return 0;
 }
 

drivers/ide/arm/icside.c

@@ -377,9 +377,6 @@ static void icside_dma_lost_irq(ide_drive_t *drive)
 
 static void icside_dma_init(ide_hwif_t *hwif)
 {
-	hwif->mwdma_mask	= 7; /* MW0..2 */
-	hwif->swdma_mask	= 7; /* SW0..2 */
-
 	hwif->dmatable_cpu	= NULL;
 	hwif->dmatable_dma	= 0;
 	hwif->set_dma_mode	= icside_set_dma_mode;
@@ -459,11 +456,19 @@ icside_register_v5(struct icside_state *state, struct expansion_card *ec)
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, NULL);
 
 	return 0;
 }
 
+static const struct ide_port_info icside_v6_port_info __initdata = {
+	.host_flags		= IDE_HFLAG_SERIALIZE |
+				  IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+				  IDE_HFLAG_NO_AUTOTUNE,
+	.mwdma_mask		= ATA_MWDMA2,
+	.swdma_mask		= ATA_SWDMA2,
+};
+
 static int __init
 icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 {
@@ -472,6 +477,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	unsigned int sel = 0;
 	int ret;
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+	struct ide_port_info d = icside_v6_port_info;
 
 	ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
 	if (!ioc_base) {
@@ -521,30 +527,25 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
 	state->hwif[1]    = mate;
 
 	hwif->maskproc    = icside_maskproc;
-	hwif->channel     = 0;
 	hwif->hwif_data   = state;
-	hwif->mate        = mate;
-	hwif->serialized  = 1;
 	hwif->config_data = (unsigned long)ioc_base;
 	hwif->select_data = sel;
 
 	mate->maskproc    = icside_maskproc;
-	mate->channel     = 1;
 	mate->hwif_data   = state;
-	mate->mate        = hwif;
-	mate->serialized  = 1;
 	mate->config_data = (unsigned long)ioc_base;
 	mate->select_data = sel | 1;
 
 	if (ec->dma != NO_DMA && !request_dma(ec->dma, hwif->name)) {
 		icside_dma_init(hwif);
 		icside_dma_init(mate);
-	}
+	} else
+		d.mwdma_mask = d.swdma_mask = 0;
 
 	idx[0] = hwif->index;
 	idx[1] = mate->index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, &d);
 
 	return 0;
 

drivers/ide/arm/ide_arm.c

@@ -39,7 +39,7 @@ static int __init ide_arm_init(void)
 		ide_init_port_hw(hwif, &hw);
 		idx[0] = hwif->index;
 
-		ide_device_add(idx);
+		ide_device_add(idx, NULL);
 	}
 
 	return 0;

drivers/ide/arm/rapide.c

@@ -58,7 +58,7 @@ rapide_probe(struct expansion_card *ec, const struct ecard_id *id)
 
 		idx[0] = hwif->index;
 
-		ide_device_add(idx);
+		ide_device_add(idx, NULL);
 
 		ecard_set_drvdata(ec, hwif);
 		goto out;
@@ -76,7 +76,7 @@ static void __devexit rapide_remove(struct expansion_card *ec)
 
 	ecard_set_drvdata(ec, NULL);
 
-	ide_unregister(hwif->index);
+	ide_unregister(hwif->index, 0, 0);
 
 	ecard_release_resources(ec);
 }

drivers/ide/cris/ide-cris.c

@@ -753,6 +753,15 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed)
 		cris_ide_set_speed(TYPE_DMA, 0, strobe, hold);
 }
 
+static const struct ide_port_info cris_port_info __initdata = {
+	.chipset		= ide_etrax100,
+	.host_flags		= IDE_HFLAG_NO_ATAPI_DMA |
+				  IDE_HFLAG_NO_DMA, /* no SFF-style DMA */
+	.pio_mask		= ATA_PIO4,
+	.udma_mask		= cris_ultra_mask,
+	.mwdma_mask		= ATA_MWDMA2,
+};
+
 static int __init init_e100_ide(void)
 {
 	hw_regs_t hw;
@@ -780,7 +789,6 @@ static int __init init_e100_ide(void)
 		ide_init_port_data(hwif, hwif->index);
 		ide_init_port_hw(hwif, &hw);
 		hwif->mmio = 1;
-		hwif->chipset = ide_etrax100;
 		hwif->set_pio_mode = &cris_set_pio_mode;
 		hwif->set_dma_mode = &cris_set_dma_mode;
 		hwif->ata_input_data = &cris_ide_input_data;
@@ -799,12 +807,6 @@ static int __init init_e100_ide(void)
 		hwif->INB = &cris_ide_inb;
 		hwif->INW = &cris_ide_inw;
 		hwif->cbl = ATA_CBL_PATA40;
-		hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
-		hwif->pio_mask = ATA_PIO4,
-		hwif->drives[0].autotune = 1;
-		hwif->drives[1].autotune = 1;
-		hwif->ultra_mask = cris_ultra_mask;
-		hwif->mwdma_mask = 0x07; /* Multiword DMA 0-2 */
 
 		idx[h] = hwif->index;
 	}
@@ -820,7 +822,7 @@ static int __init init_e100_ide(void)
 	cris_ide_set_speed(TYPE_DMA, 0, ATA_DMA2_STROBE, ATA_DMA2_HOLD);
 	cris_ide_set_speed(TYPE_UDMA, ATA_UDMA2_CYC, ATA_UDMA2_DVS, 0);
 
-	ide_device_add(idx);
+	ide_device_add(idx, &cris_port_info);
 
 	return 0;
 }
@@ -1032,11 +1034,7 @@ static int cris_dma_setup(ide_drive_t *drive)
 
 static void cris_dma_exec_cmd(ide_drive_t *drive, u8 command)
 {
-	/* set the irq handler which will finish the request when DMA is done */
-	ide_set_handler(drive, &cris_dma_intr, WAIT_CMD, NULL);
-
-	/* issue cmd to drive */
-	cris_ide_outb(command, IDE_COMMAND_REG);
+	ide_execute_command(drive, command, &cris_dma_intr, WAIT_CMD, NULL);
 }
 
 static void cris_dma_start(ide_drive_t *drive)

drivers/ide/h8300/ide-h8300.c

@@ -114,7 +114,7 @@ static int __init h8300_ide_init(void)
 
 	idx[0] = index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, NULL);
 
 	return 0;
 

drivers/ide/ide-acpi.c

@@ -39,7 +39,6 @@ struct GTM_buffer {
 };
 
 struct ide_acpi_drive_link {
-	ide_drive_t	*drive;
 	acpi_handle	 obj_handle;
 	u8		 idbuff[512];
 };
@@ -280,16 +279,6 @@ static int do_drive_get_GTF(ide_drive_t *drive,
 
 	port = hwif->channel ? drive->dn - 2: drive->dn;
 
-	if (!drive->acpidata) {
-		if (port == 0) {
-			drive->acpidata = &hwif->acpidata->master;
-			hwif->acpidata->master.drive = drive;
-		} else {
-			drive->acpidata = &hwif->acpidata->slave;
-			hwif->acpidata->slave.drive = drive;
-		}
-	}
-
 	DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
 		 hwif->name, dev->bus_id, port, hwif->channel);
 
@@ -494,7 +483,6 @@ int ide_acpi_exec_tfs(ide_drive_t *drive)
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(ide_acpi_exec_tfs);
 
 /**
  * ide_acpi_get_timing - get the channel (controller) timings
@@ -580,7 +568,6 @@ void ide_acpi_get_timing(ide_hwif_t *hwif)
 
 	kfree(output.pointer);
 }
-EXPORT_SYMBOL_GPL(ide_acpi_get_timing);
 
 /**
  * ide_acpi_push_timing - set the channel (controller) timings
@@ -634,7 +621,6 @@ void ide_acpi_push_timing(ide_hwif_t *hwif)
 	}
 	DEBPRINT("_STM status: %d\n", status);
 }
-EXPORT_SYMBOL_GPL(ide_acpi_push_timing);
 
 /**
  * ide_acpi_set_state - set the channel power state
@@ -688,11 +674,6 @@ void ide_acpi_set_state(ide_hwif_t *hwif, int on)
  */
 void ide_acpi_init(ide_hwif_t *hwif)
 {
-	int unit;
-	int			err;
-	struct ide_acpi_drive_link	*master;
-	struct ide_acpi_drive_link	*slave;
-
 	ide_acpi_blacklist();
 
 	hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
@@ -704,40 +685,38 @@ void ide_acpi_init(ide_hwif_t *hwif)
 		DEBPRINT("no ACPI object for %s found\n", hwif->name);
 		kfree(hwif->acpidata);
 		hwif->acpidata = NULL;
-		return;
 	}
+}
+
+void ide_acpi_port_init_devices(ide_hwif_t *hwif)
+{
+	ide_drive_t *drive;
+	int i, err;
+
+	if (hwif->acpidata == NULL)
+		return;
 
 	/*
 	 * The ACPI spec mandates that we send information
 	 * for both drives, regardless whether they are connected
 	 * or not.
 	 */
-	hwif->acpidata->master.drive = &hwif->drives[0];
 	hwif->drives[0].acpidata = &hwif->acpidata->master;
-	master = &hwif->acpidata->master;
-
-	hwif->acpidata->slave.drive = &hwif->drives[1];
 	hwif->drives[1].acpidata = &hwif->acpidata->slave;
-	slave = &hwif->acpidata->slave;
-
 
 	/*
 	 * Send IDENTIFY for each drive
 	 */
-	if (master->drive->present) {
-		err = taskfile_lib_get_identify(master->drive, master->idbuff);
-		if (err) {
-			DEBPRINT("identify device %s failed (%d)\n",
-				 master->drive->name, err);
-		}
-	}
+	for (i = 0; i < MAX_DRIVES; i++) {
+		drive = &hwif->drives[i];
+
+		if (!drive->present)
+			continue;
 
-	if (slave->drive->present) {
-		err = taskfile_lib_get_identify(slave->drive, slave->idbuff);
-		if (err) {
+		err = taskfile_lib_get_identify(drive, drive->acpidata->idbuff);
+		if (err)
 			DEBPRINT("identify device %s failed (%d)\n",
-				 slave->drive->name, err);
-		}
+				 drive->name, err);
 	}
 
 	if (ide_noacpionboot) {
@@ -753,13 +732,11 @@ void ide_acpi_init(ide_hwif_t *hwif)
 	ide_acpi_get_timing(hwif);
 	ide_acpi_push_timing(hwif);
 
-	for (unit = 0; unit < MAX_DRIVES; ++unit) {
-		ide_drive_t *drive = &hwif->drives[unit];
+	for (i = 0; i < MAX_DRIVES; i++) {
+		drive = &hwif->drives[i];
 
-		if (drive->present) {
+		if (drive->present)
 			/* Execute ACPI startup code */
 			ide_acpi_exec_tfs(drive);
-		}
 	}
 }
-EXPORT_SYMBOL_GPL(ide_acpi_init);

drivers/ide/ide-cd.c

@@ -604,8 +604,6 @@ static ide_startstop_t cdrom_transfer_packet_command (ide_drive_t *drive,
  * Block read functions.
  */
 
-typedef void (xfer_func_t)(ide_drive_t *, void *, u32);
-
 static void ide_cd_pad_transfer(ide_drive_t *drive, xfer_func_t *xf, int len)
 {
 	while (len > 0) {

drivers/ide/ide-dma.c

@@ -819,6 +819,26 @@ int ide_set_dma(ide_drive_t *drive)
 	return 0;
 }
 
+void ide_check_dma_crc(ide_drive_t *drive)
+{
+	u8 mode;
+
+	ide_dma_off_quietly(drive);
+	drive->crc_count = 0;
+	mode = drive->current_speed;
+	/*
+	 * Don't try non Ultra-DMA modes without iCRC's.  Force the
+	 * device to PIO and make the user enable SWDMA/MWDMA modes.
+	 */
+	if (mode > XFER_UDMA_0 && mode <= XFER_UDMA_7)
+		mode--;
+	else
+		mode = XFER_PIO_4;
+	ide_set_xfer_rate(drive, mode);
+	if (drive->current_speed >= XFER_SW_DMA_0)
+		ide_dma_on(drive);
+}
+
 #ifdef CONFIG_BLK_DEV_IDEDMA_PCI
 void ide_dma_lost_irq (ide_drive_t *drive)
 {

drivers/ide/ide-generic.c

@@ -23,7 +23,7 @@ static int __init ide_generic_init(void)
 	for (i = 0; i < MAX_HWIFS; i++)
 		idx[i] = ide_hwifs[i].present ? 0xff : i;
 
-	ide_device_add_all(idx);
+	ide_device_add_all(idx, NULL);
 
 	if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET])
 		ide_release_lock();	/* for atari only */

drivers/ide/ide-iops.c

@@ -163,8 +163,6 @@ void SELECT_DRIVE (ide_drive_t *drive)
 	HWIF(drive)->OUTB(drive->select.all, IDE_SELECT_REG);
 }
 
-EXPORT_SYMBOL(SELECT_DRIVE);
-
 void SELECT_MASK (ide_drive_t *drive, int mask)
 {
 	if (HWIF(drive)->maskproc)
@@ -614,66 +612,6 @@ u8 eighty_ninty_three (ide_drive_t *drive)
 	return 0;
 }
 
-int ide_ata66_check (ide_drive_t *drive, ide_task_t *args)
-{
-	if (args->tf.command == WIN_SETFEATURES &&
-	    args->tf.nsect > XFER_UDMA_2 &&
-	    args->tf.feature == SETFEATURES_XFER) {
-		if (eighty_ninty_three(drive) == 0) {
-			printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
-					    "be set\n", drive->name);
-			return 1;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * Backside of HDIO_DRIVE_CMD call of SETFEATURES_XFER.
- * 1 : Safe to update drive->id DMA registers.
- * 0 : OOPs not allowed.
- */
-int set_transfer (ide_drive_t *drive, ide_task_t *args)
-{
-	if (args->tf.command == WIN_SETFEATURES &&
-	    args->tf.nsect >= XFER_SW_DMA_0 &&
-	    args->tf.feature == SETFEATURES_XFER &&
-	    (drive->id->dma_ultra ||
-	     drive->id->dma_mword ||
-	     drive->id->dma_1word))
-		return 1;
-
-	return 0;
-}
-
-#ifdef CONFIG_BLK_DEV_IDEDMA
-static u8 ide_auto_reduce_xfer (ide_drive_t *drive)
-{
-	if (!drive->crc_count)
-		return drive->current_speed;
-	drive->crc_count = 0;
-
-	switch(drive->current_speed) {
-		case XFER_UDMA_7:	return XFER_UDMA_6;
-		case XFER_UDMA_6:	return XFER_UDMA_5;
-		case XFER_UDMA_5:	return XFER_UDMA_4;
-		case XFER_UDMA_4:	return XFER_UDMA_3;
-		case XFER_UDMA_3:	return XFER_UDMA_2;
-		case XFER_UDMA_2:	return XFER_UDMA_1;
-		case XFER_UDMA_1:	return XFER_UDMA_0;
-			/*
-			 * OOPS we do not goto non Ultra DMA modes
-			 * without iCRC's available we force
-			 * the system to PIO and make the user
-			 * invoke the ATA-1 ATA-2 DMA modes.
-			 */
-		case XFER_UDMA_0:
-		default:		return XFER_PIO_4;
-	}
-}
-#endif /* CONFIG_BLK_DEV_IDEDMA */
-
 int ide_driveid_update(ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = drive->hwif;
@@ -882,22 +820,17 @@ void ide_execute_command(ide_drive_t *drive, u8 cmd, ide_handler_t *handler,
 	unsigned long flags;
 	ide_hwgroup_t *hwgroup = HWGROUP(drive);
 	ide_hwif_t *hwif = HWIF(drive);
-	
+
 	spin_lock_irqsave(&ide_lock, flags);
-	
 	BUG_ON(hwgroup->handler);
-	hwgroup->handler	= handler;
-	hwgroup->expiry		= expiry;
-	hwgroup->timer.expires	= jiffies + timeout;
-	hwgroup->req_gen_timer = hwgroup->req_gen;
-	add_timer(&hwgroup->timer);
+	__ide_set_handler(drive, handler, timeout, expiry);
 	hwif->OUTBSYNC(drive, cmd, IDE_COMMAND_REG);
-	/* Drive takes 400nS to respond, we must avoid the IRQ being
-	   serviced before that. 
-	   
-	   FIXME: we could skip this delay with care on non shared
-	   devices 
-	*/
+	/*
+	 * Drive takes 400nS to respond, we must avoid the IRQ being
+	 * serviced before that.
+	 *
+	 * FIXME: we could skip this delay with care on non shared devices
+	 */
 	ndelay(400);
 	spin_unlock_irqrestore(&ide_lock, flags);
 }
@@ -1005,19 +938,6 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive)
 	return ide_stopped;
 }
 
-static void check_dma_crc(ide_drive_t *drive)
-{
-#ifdef CONFIG_BLK_DEV_IDEDMA
-	if (drive->crc_count) {
-		ide_dma_off_quietly(drive);
-		ide_set_xfer_rate(drive, ide_auto_reduce_xfer(drive));
-		if (drive->current_speed >= XFER_SW_DMA_0)
-			ide_dma_on(drive);
-	} else
-		ide_dma_off(drive);
-#endif
-}
-
 static void ide_disk_pre_reset(ide_drive_t *drive)
 {
 	int legacy = (drive->id->cfs_enable_2 & 0x0400) ? 0 : 1;
@@ -1039,17 +959,20 @@ static void pre_reset(ide_drive_t *drive)
 	else
 		drive->post_reset = 1;
 
+	if (drive->using_dma) {
+		if (drive->crc_count)
+			ide_check_dma_crc(drive);
+		else
+			ide_dma_off(drive);
+	}
+
 	if (!drive->keep_settings) {
-		if (drive->using_dma) {
-			check_dma_crc(drive);
-		} else {
+		if (!drive->using_dma) {
 			drive->unmask = 0;
 			drive->io_32bit = 0;
 		}
 		return;
 	}
-	if (drive->using_dma)
-		check_dma_crc(drive);
 
 	if (HWIF(drive)->pre_reset != NULL)
 		HWIF(drive)->pre_reset(drive);

drivers/ide/ide-pnp.c

@@ -49,7 +49,7 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id
 		printk(KERN_INFO "ide%d: generic PnP IDE interface\n", index);
 		pnp_set_drvdata(dev,hwif);
 
-		ide_device_add(idx);
+		ide_device_add(idx, NULL);
 
 		return 0;
 	}
@@ -60,9 +60,10 @@ static int idepnp_probe(struct pnp_dev * dev, const struct pnp_device_id *dev_id
 static void idepnp_remove(struct pnp_dev * dev)
 {
 	ide_hwif_t *hwif = pnp_get_drvdata(dev);
-	if (hwif) {
-		ide_unregister(hwif->index);
-	} else
+
+	if (hwif)
+		ide_unregister(hwif->index, 0, 0);
+	else
 		printk(KERN_ERR "idepnp: Unable to remove device, please report.\n");
 }
 

drivers/ide/ide-probe.c

@@ -423,8 +423,9 @@ static int ide_busy_sleep(ide_hwif_t *hwif)
 
 static int do_probe (ide_drive_t *drive, u8 cmd)
 {
-	int rc;
 	ide_hwif_t *hwif = HWIF(drive);
+	int rc;
+	u8 stat;
 
 	if (drive->present) {
 		/* avoid waiting for inappropriate probes */
@@ -461,15 +462,17 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			/* failed: try again */
 			rc = try_to_identify(drive,cmd);
 		}
-		if (hwif->INB(IDE_STATUS_REG) == (BUSY_STAT|READY_STAT))
+
+		stat = hwif->INB(IDE_STATUS_REG);
+
+		if (stat == (BUSY_STAT | READY_STAT))
 			return 4;
 
 		if ((rc == 1 && cmd == WIN_PIDENTIFY) &&
 			((drive->autotune == IDE_TUNE_DEFAULT) ||
 			(drive->autotune == IDE_TUNE_AUTO))) {
-			printk("%s: no response (status = 0x%02x), "
-				"resetting drive\n", drive->name,
-				hwif->INB(IDE_STATUS_REG));
+			printk(KERN_ERR "%s: no response (status = 0x%02x), "
+					"resetting drive\n", drive->name, stat);
 			msleep(50);
 			hwif->OUTB(drive->select.all, IDE_SELECT_REG);
 			msleep(50);
@@ -477,11 +480,13 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 			(void)ide_busy_sleep(hwif);
 			rc = try_to_identify(drive, cmd);
 		}
+
+		/* ensure drive IRQ is clear */
+		stat = hwif->INB(IDE_STATUS_REG);
+
 		if (rc == 1)
-			printk("%s: no response (status = 0x%02x)\n",
-				drive->name, hwif->INB(IDE_STATUS_REG));
-		/* ensure drive irq is clear */
-		(void) hwif->INB(IDE_STATUS_REG);
+			printk(KERN_ERR "%s: no response (status = 0x%02x)\n",
+					drive->name, stat);
 	} else {
 		/* not present or maybe ATAPI */
 		rc = 3;
@@ -502,6 +507,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
 static void enable_nest (ide_drive_t *drive)
 {
 	ide_hwif_t *hwif = HWIF(drive);
+	u8 stat;
 
 	printk("%s: enabling %s -- ", hwif->name, drive->id->model);
 	SELECT_DRIVE(drive);
@@ -515,11 +521,12 @@ static void enable_nest (ide_drive_t *drive)
 
 	msleep(50);
 
-	if (!OK_STAT((hwif->INB(IDE_STATUS_REG)), 0, BAD_STAT)) {
-		printk("failed (status = 0x%02x)\n", hwif->INB(IDE_STATUS_REG));
-	} else {
-		printk("success\n");
-	}
+	stat = hwif->INB(IDE_STATUS_REG);
+
+	if (!OK_STAT(stat, 0, BAD_STAT))
+		printk(KERN_CONT "failed (status = 0x%02x)\n", stat);
+	else
+		printk(KERN_CONT "success\n");
 
 	/* if !(success||timed-out) */
 	if (do_probe(drive, WIN_IDENTIFY) >= 2) {
@@ -822,7 +829,7 @@ static void ide_port_tune_devices(ide_hwif_t *hwif)
 	for (unit = 0; unit < MAX_DRIVES; ++unit) {
 		ide_drive_t *drive = &hwif->drives[unit];
 
-		if (hwif->no_io_32bit)
+		if (hwif->host_flags & IDE_HFLAG_NO_IO_32BIT)
 			drive->no_io_32bit = 1;
 		else
 			drive->no_io_32bit = drive->id->dword_io ? 1 : 0;
@@ -881,13 +888,6 @@ static int ide_init_queue(ide_drive_t *drive)
 	q->queuedata = drive;
 	blk_queue_segment_boundary(q, 0xffff);
 
-	if (!hwif->rqsize) {
-		if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
-		    (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
-			hwif->rqsize = 256;
-		else
-			hwif->rqsize = 65536;
-	}
 	if (hwif->rqsize < max_sectors)
 		max_sectors = hwif->rqsize;
 	blk_queue_max_sectors(q, max_sectors);
@@ -918,6 +918,48 @@ static int ide_init_queue(ide_drive_t *drive)
 	return 0;
 }
 
+static void ide_add_drive_to_hwgroup(ide_drive_t *drive)
+{
+	ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
+
+	spin_lock_irq(&ide_lock);
+	if (!hwgroup->drive) {
+		/* first drive for hwgroup. */
+		drive->next = drive;
+		hwgroup->drive = drive;
+		hwgroup->hwif = HWIF(hwgroup->drive);
+	} else {
+		drive->next = hwgroup->drive->next;
+		hwgroup->drive->next = drive;
+	}
+	spin_unlock_irq(&ide_lock);
+}
+
+/*
+ * For any present drive:
+ * - allocate the block device queue
+ * - link drive into the hwgroup
+ */
+static void ide_port_setup_devices(ide_hwif_t *hwif)
+{
+	int i;
+
+	for (i = 0; i < MAX_DRIVES; i++) {
+		ide_drive_t *drive = &hwif->drives[i];
+
+		if (!drive->present)
+			continue;
+
+		if (ide_init_queue(drive)) {
+			printk(KERN_ERR "ide: failed to init %s\n",
+					drive->name);
+			continue;
+		}
+
+		ide_add_drive_to_hwgroup(drive);
+	}
+}
+
 /*
  * This routine sets up the irq for an ide interface, and creates a new
  * hwgroup for the irq/hwif if none was previously assigned.
@@ -1019,30 +1061,12 @@ static int init_irq (ide_hwif_t *hwif)
 	       		goto out_unlink;
 	}
 
-	/*
-	 * For any present drive:
-	 * - allocate the block device queue
-	 * - link drive into the hwgroup
-	 */
-	for (index = 0; index < MAX_DRIVES; ++index) {
-		ide_drive_t *drive = &hwif->drives[index];
-		if (!drive->present)
-			continue;
-		if (ide_init_queue(drive)) {
-			printk(KERN_ERR "ide: failed to init %s\n",drive->name);
-			continue;
-		}
-		spin_lock_irq(&ide_lock);
-		if (!hwgroup->drive) {
-			/* first drive for hwgroup. */
-			drive->next = drive;
-			hwgroup->drive = drive;
-			hwgroup->hwif = HWIF(hwgroup->drive);
-		} else {
-			drive->next = hwgroup->drive->next;
-			hwgroup->drive->next = drive;
-		}
-		spin_unlock_irq(&ide_lock);
+	if (!hwif->rqsize) {
+		if ((hwif->host_flags & IDE_HFLAG_NO_LBA48) ||
+		    (hwif->host_flags & IDE_HFLAG_NO_LBA48_DMA))
+			hwif->rqsize = 256;
+		else
+			hwif->rqsize = 65536;
 	}
 
 #if !defined(__mc68000__) && !defined(CONFIG_APUS)
@@ -1058,6 +1082,9 @@ static int init_irq (ide_hwif_t *hwif)
 		printk(" (%sed with %s)",
 			hwif->sharing_irq ? "shar" : "serializ", match->name);
 	printk("\n");
+
+	ide_port_setup_devices(hwif);
+
 	mutex_unlock(&ide_cfg_mtx);
 	return 0;
 out_unlink:
@@ -1182,30 +1209,6 @@ static void drive_release_dev (struct device *dev)
 	complete(&drive->gendev_rel_comp);
 }
 
-/*
- * init_gendisk() (as opposed to ide_geninit) is called for each major device,
- * after probing for drives, to allocate partition tables and other data
- * structures needed for the routines in genhd.c.  ide_geninit() gets called
- * somewhat later, during the partition check.
- */
-static void init_gendisk (ide_hwif_t *hwif)
-{
-	unsigned int unit;
-
-	for (unit = 0; unit < MAX_DRIVES; ++unit) {
-		ide_drive_t * drive = &hwif->drives[unit];
-		ide_add_generic_settings(drive);
-		snprintf(drive->gendev.bus_id,BUS_ID_SIZE,"%u.%u",
-			 hwif->index,unit);
-		drive->gendev.parent = &hwif->gendev;
-		drive->gendev.bus = &ide_bus_type;
-		drive->gendev.driver_data = drive;
-		drive->gendev.release = drive_release_dev;
-	}
-	blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS,
-			THIS_MODULE, ata_probe, ata_lock, hwif);
-}
-
 static int hwif_init(ide_hwif_t *hwif)
 {
 	int old_irq;
@@ -1262,8 +1265,8 @@ static int hwif_init(ide_hwif_t *hwif)
 		hwif->name, hwif->irq);
 
 done:
-	init_gendisk(hwif);
-	ide_acpi_init(hwif);
+	blk_register_region(MKDEV(hwif->major, 0), MAX_DRIVES << PARTN_BITS,
+			    THIS_MODULE, ata_probe, ata_lock, hwif);
 	return 1;
 
 out:
@@ -1277,23 +1280,118 @@ static void hwif_register_devices(ide_hwif_t *hwif)
 
 	for (i = 0; i < MAX_DRIVES; i++) {
 		ide_drive_t *drive = &hwif->drives[i];
+		struct device *dev = &drive->gendev;
+		int ret;
 
-		if (drive->present) {
-			int ret = device_register(&drive->gendev);
+		if (!drive->present)
+			continue;
 
-			if (ret < 0)
-				printk(KERN_WARNING "IDE: %s: "
-					"device_register error: %d\n",
-					__FUNCTION__, ret);
-		}
+		ide_add_generic_settings(drive);
+
+		snprintf(dev->bus_id, BUS_ID_SIZE, "%u.%u", hwif->index, i);
+		dev->parent = &hwif->gendev;
+		dev->bus = &ide_bus_type;
+		dev->driver_data = drive;
+		dev->release = drive_release_dev;
+
+		ret = device_register(dev);
+		if (ret < 0)
+			printk(KERN_WARNING "IDE: %s: device_register error: "
+					    "%d\n", __func__, ret);
+	}
+}
+
+static void ide_port_init_devices(ide_hwif_t *hwif)
+{
+	int i;
+
+	for (i = 0; i < MAX_DRIVES; i++) {
+		ide_drive_t *drive = &hwif->drives[i];
+
+		if (hwif->host_flags & IDE_HFLAG_IO_32BIT)
+			drive->io_32bit = 1;
+		if (hwif->host_flags & IDE_HFLAG_UNMASK_IRQS)
+			drive->unmask = 1;
+		if (hwif->host_flags & IDE_HFLAG_NO_UNMASK_IRQS)
+			drive->no_unmask = 1;
+		if ((hwif->host_flags & IDE_HFLAG_NO_AUTOTUNE) == 0)
+			drive->autotune = 1;
+	}
+
+	if (hwif->port_init_devs)
+		hwif->port_init_devs(hwif);
+}
+
+static void ide_init_port(ide_hwif_t *hwif, unsigned int port,
+			  const struct ide_port_info *d)
+{
+	if (d->chipset != ide_etrax100)
+		hwif->channel = port;
+
+	if (d->chipset)
+		hwif->chipset = d->chipset;
+
+	if (d->init_iops)
+		d->init_iops(hwif);
+
+	if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0)
+		ide_hwif_setup_dma(hwif, d);
+
+	if ((!hwif->irq && (d->host_flags & IDE_HFLAG_LEGACY_IRQS)) ||
+	    (d->host_flags & IDE_HFLAG_FORCE_LEGACY_IRQS))
+		hwif->irq = port ? 15 : 14;
+
+	hwif->host_flags = d->host_flags;
+	hwif->pio_mask = d->pio_mask;
+
+	if ((d->host_flags & IDE_HFLAG_SERIALIZE) && hwif->mate)
+		hwif->mate->serialized = hwif->serialized = 1;
+
+	hwif->swdma_mask = d->swdma_mask;
+	hwif->mwdma_mask = d->mwdma_mask;
+	hwif->ultra_mask = d->udma_mask;
+
+	/* reset DMA masks only for SFF-style DMA controllers */
+	if ((d->host_flags && IDE_HFLAG_NO_DMA) == 0 && hwif->dma_base == 0)
+		hwif->swdma_mask = hwif->mwdma_mask = hwif->ultra_mask = 0;
+
+	if (d->host_flags & IDE_HFLAG_RQSIZE_256)
+		hwif->rqsize = 256;
+
+	/* call chipset specific routine for each enabled port */
+	if (d->init_hwif)
+		d->init_hwif(hwif);
+
+	if (hwif->cable_detect && (hwif->ultra_mask & 0x78)) {
+		if (hwif->cbl != ATA_CBL_PATA40_SHORT)
+			hwif->cbl = hwif->cable_detect(hwif);
 	}
 }
 
-int ide_device_add_all(u8 *idx)
+int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
 {
-	ide_hwif_t *hwif;
+	ide_hwif_t *hwif, *mate = NULL;
 	int i, rc = 0;
 
+	for (i = 0; i < MAX_HWIFS; i++) {
+		if (d == NULL || idx[i] == 0xff) {
+			mate = NULL;
+			continue;
+		}
+
+		hwif = &ide_hwifs[idx[i]];
+
+		if (d->chipset != ide_etrax100 && (i & 1) && mate) {
+			hwif->mate = mate;
+			mate->mate = hwif;
+		}
+
+		mate = (i & 1) ? NULL : hwif;
+
+		ide_init_port(hwif, i & 1, d);
+		ide_port_init_devices(hwif);
+	}
+
 	for (i = 0; i < MAX_HWIFS; i++) {
 		if (idx[i] == 0xff)
 			continue;
@@ -1337,6 +1435,9 @@ int ide_device_add_all(u8 *idx)
 			rc = -1;
 			continue;
 		}
+
+		ide_acpi_init(hwif);
+		ide_acpi_port_init_devices(hwif);
 	}
 
 	for (i = 0; i < MAX_HWIFS; i++) {
@@ -1354,15 +1455,22 @@ int ide_device_add_all(u8 *idx)
 	}
 
 	for (i = 0; i < MAX_HWIFS; i++) {
-		if (idx[i] != 0xff)
-			ide_proc_register_port(&ide_hwifs[idx[i]]);
+		if (idx[i] == 0xff)
+			continue;
+
+		hwif = &ide_hwifs[idx[i]];
+
+		if (hwif->present) {
+			ide_proc_register_port(hwif);
+			ide_proc_port_register_devices(hwif);
+		}
 	}
 
 	return rc;
 }
 EXPORT_SYMBOL_GPL(ide_device_add_all);
 
-int ide_device_add(u8 idx[4])
+int ide_device_add(u8 idx[4], const struct ide_port_info *d)
 {
 	u8 idx_all[MAX_HWIFS];
 	int i;
@@ -1370,6 +1478,6 @@ int ide_device_add(u8 idx[4])
 	for (i = 0; i < MAX_HWIFS; i++)
 		idx_all[i] = (i < 4) ? idx[i] : 0xff;
 
-	return ide_device_add_all(idx_all);
+	return ide_device_add_all(idx_all, d);
 }
 EXPORT_SYMBOL_GPL(ide_device_add);

drivers/ide/ide-proc.c

@@ -739,7 +739,7 @@ void ide_proc_unregister_driver(ide_drive_t *drive, ide_driver_t *driver)
 
 EXPORT_SYMBOL(ide_proc_unregister_driver);
 
-static void create_proc_ide_drives(ide_hwif_t *hwif)
+void ide_proc_port_register_devices(ide_hwif_t *hwif)
 {
 	int	d;
 	struct proc_dir_entry *ent;
@@ -793,9 +793,6 @@ static ide_proc_entry_t hwif_entries[] = {
 
 void ide_proc_register_port(ide_hwif_t *hwif)
 {
-	if (!hwif->present)
-		return;
-
 	if (!hwif->proc) {
 		hwif->proc = proc_mkdir(hwif->name, proc_ide_root);
 
@@ -804,8 +801,6 @@ void ide_proc_register_port(ide_hwif_t *hwif)
 
 		ide_add_proc_entries(hwif->proc, hwif_entries, hwif);
 	}
-
-	create_proc_ide_drives(hwif);
 }
 
 #ifdef CONFIG_BLK_DEV_IDEPCI

drivers/ide/ide-taskfile.c

@@ -755,6 +755,7 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
 	u8 args[4], xfer_rate = 0;
 	ide_task_t tfargs;
 	struct ide_taskfile *tf = &tfargs.tf;
+	struct hd_driveid *id = drive->id;
 
 	if (NULL == (void *) arg) {
 		struct request rq;
@@ -792,10 +793,16 @@ int ide_cmd_ioctl (ide_drive_t *drive, unsigned int cmd, unsigned long arg)
 			return -ENOMEM;
 	}
 
-	if (set_transfer(drive, &tfargs)) {
+	if (tf->command == WIN_SETFEATURES &&
+	    tf->feature == SETFEATURES_XFER &&
+	    tf->nsect >= XFER_SW_DMA_0 &&
+	    (id->dma_ultra || id->dma_mword || id->dma_1word)) {
 		xfer_rate = args[1];
-		if (ide_ata66_check(drive, &tfargs))
+		if (tf->nsect > XFER_UDMA_2 && !eighty_ninty_three(drive)) {
+			printk(KERN_WARNING "%s: UDMA speeds >UDMA33 cannot "
+					    "be set\n", drive->name);
 			goto abort;
+		}
 	}
 
 	err = ide_raw_taskfile(drive, &tfargs, buf, args[3]);

drivers/ide/ide.c

@@ -499,6 +499,8 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
 /**
  *	ide_unregister		-	free an IDE interface
  *	@index: index of interface (will change soon to a pointer)
+ *	@init_default: init default hwif flag
+ *	@restore: restore hwif flag
  *
  *	Perform the final unregister of an IDE interface. At the moment
  *	we don't refcount interfaces so this will also get split up.
@@ -518,7 +520,7 @@ void ide_remove_port_from_hwgroup(ide_hwif_t *hwif)
  *	This is raving bonkers.
  */
 
-void ide_unregister(unsigned int index)
+void ide_unregister(unsigned int index, int init_default, int restore)
 {
 	ide_drive_t *drive;
 	ide_hwif_t *hwif, *g;
@@ -602,9 +604,12 @@ void ide_unregister(unsigned int index)
 
 	/* restore hwif data to pristine status */
 	ide_init_port_data(hwif, index);
-	init_hwif_default(hwif, index);
 
-	ide_hwif_restore(hwif, &tmp_hwif);
+	if (init_default)
+		init_hwif_default(hwif, index);
+
+	if (restore)
+		ide_hwif_restore(hwif, &tmp_hwif);
 
 abort:
 	spin_unlock_irq(&ide_lock);
@@ -678,6 +683,31 @@ void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw)
 }
 EXPORT_SYMBOL_GPL(ide_init_port_hw);
 
+ide_hwif_t *ide_deprecated_find_port(unsigned long base)
+{
+	ide_hwif_t *hwif;
+	int i;
+
+	for (i = 0; i < MAX_HWIFS; i++) {
+		hwif = &ide_hwifs[i];
+		if (hwif->io_ports[IDE_DATA_OFFSET] == base)
+			goto found;
+	}
+
+	for (i = 0; i < MAX_HWIFS; i++) {
+		hwif = &ide_hwifs[i];
+		if (hwif->hold)
+			continue;
+		if (!hwif->present && hwif->mate == NULL)
+			goto found;
+	}
+
+	hwif = NULL;
+found:
+	return hwif;
+}
+EXPORT_SYMBOL_GPL(ide_deprecated_find_port);
+
 /**
  *	ide_register_hw		-	register IDE interface
  *	@hw: hardware registers
@@ -697,38 +727,26 @@ int ide_register_hw(hw_regs_t *hw, void (*quirkproc)(ide_drive_t *),
 	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	do {
-		for (index = 0; index < MAX_HWIFS; ++index) {
-			hwif = &ide_hwifs[index];
-			if (hwif->io_ports[IDE_DATA_OFFSET] == hw->io_ports[IDE_DATA_OFFSET])
-				goto found;
-		}
-		for (index = 0; index < MAX_HWIFS; ++index) {
-			hwif = &ide_hwifs[index];
-			if (hwif->hold)
-				continue;
-			if (!hwif->present && hwif->mate == NULL)
-				goto found;
-		}
+		hwif = ide_deprecated_find_port(hw->io_ports[IDE_DATA_OFFSET]);
+		index = hwif->index;
+		if (hwif)
+			goto found;
 		for (index = 0; index < MAX_HWIFS; index++)
-			ide_unregister(index);
+			ide_unregister(index, 1, 1);
 	} while (retry--);
 	return -1;
 found:
 	if (hwif->present)
-		ide_unregister(index);
-	else if (!hwif->hold) {
+		ide_unregister(index, 0, 1);
+	else if (!hwif->hold)
 		ide_init_port_data(hwif, index);
-		init_hwif_default(hwif, index);
-	}
-	if (hwif->present)
-		return -1;
 
 	ide_init_port_hw(hwif, hw);
 	hwif->quirkproc = quirkproc;
 
 	idx[0] = index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, NULL);
 
 	if (hwifp)
 		*hwifp = hwif;
@@ -791,10 +809,6 @@ int set_io_32bit(ide_drive_t *drive, int arg)
 		return -EBUSY;
 
 	drive->io_32bit = arg;
-#ifdef CONFIG_BLK_DEV_DTC2278
-	if (HWIF(drive)->chipset == ide_dtc2278)
-		HWIF(drive)->drives[!drive->select.b.unit].io_32bit = arg;
-#endif /* CONFIG_BLK_DEV_DTC2278 */
 
 	spin_unlock_irq(&ide_lock);
 
@@ -1021,11 +1035,8 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
 		case HDIO_GET_NICE:
 			return put_user(drive->dsc_overlap	<<	IDE_NICE_DSC_OVERLAP	|
 					drive->atapi_overlap	<<	IDE_NICE_ATAPI_OVERLAP	|
-					drive->nice0		<< 	IDE_NICE_0		|
-					drive->nice1		<<	IDE_NICE_1		|
-					drive->nice2		<<	IDE_NICE_2,
+					drive->nice1 << IDE_NICE_1,
 					(long __user *) arg);
-
 #ifdef CONFIG_IDE_TASK_IOCTL
 		case HDIO_DRIVE_TASKFILE:
 		        if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
@@ -1066,7 +1077,7 @@ int generic_ide_ioctl(ide_drive_t *drive, struct file *file, struct block_device
 	        case HDIO_UNREGISTER_HWIF:
 			if (!capable(CAP_SYS_RAWIO)) return -EACCES;
 			/* (arg > MAX_HWIFS) checked in function */
-			ide_unregister(arg);
+			ide_unregister(arg, 1, 1);
 			return 0;
 		case HDIO_SET_NICE:
 			if (!capable(CAP_SYS_ADMIN)) return -EACCES;
@@ -1711,7 +1722,7 @@ void __exit cleanup_module (void)
 	int index;
 
 	for (index = 0; index < MAX_HWIFS; ++index)
-		ide_unregister(index);
+		ide_unregister(index, 0, 0);
 
 	proc_ide_destroy();
 

drivers/ide/legacy/ali14xx.c

@@ -191,9 +191,14 @@ static int __init initRegisters (void) {
 	return t;
 }
 
+static const struct ide_port_info ali14xx_port_info = {
+	.chipset		= ide_ali14xx,
+	.host_flags		= IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE,
+	.pio_mask		= ATA_PIO4,
+};
+
 static int __init ali14xx_probe(void)
 {
-	ide_hwif_t *hwif, *mate;
 	static u8 idx[4] = { 0, 1, 0xff, 0xff };
 
 	printk(KERN_DEBUG "ali14xx: base=0x%03x, regOn=0x%02x.\n",
@@ -205,21 +210,10 @@ static int __init ali14xx_probe(void)
 		return 1;
 	}
 
-	hwif = &ide_hwifs[0];
-	mate = &ide_hwifs[1];
-
-	hwif->chipset = ide_ali14xx;
-	hwif->pio_mask = ATA_PIO4;
-	hwif->set_pio_mode = &ali14xx_set_pio_mode;
-	hwif->mate = mate;
-
-	mate->chipset = ide_ali14xx;
-	mate->pio_mask = ATA_PIO4;
-	mate->set_pio_mode = &ali14xx_set_pio_mode;
-	mate->mate = hwif;
-	mate->channel = 1;
+	ide_hwifs[0].set_pio_mode = &ali14xx_set_pio_mode;
+	ide_hwifs[1].set_pio_mode = &ali14xx_set_pio_mode;
 
-	ide_device_add(idx);
+	ide_device_add(idx, &ali14xx_port_info);
 
 	return 0;
 }

drivers/ide/legacy/buddha.c

@@ -232,7 +232,7 @@ static int __init buddha_init(void)
 			}
 		}
 
-		ide_device_add(idx);
+		ide_device_add(idx, NULL);
 	}
 
 	return 0;

drivers/ide/legacy/dtc2278.c

@@ -84,14 +84,20 @@ static void dtc2278_set_pio_mode(ide_drive_t *drive, const u8 pio)
 		/* Actually we do - there is a data sheet available for the
 		   Winbond but does anyone actually care */
 	}
-
-	/*
-	 * 32bit I/O has to be enabled for *both* drives at the same time.
-	 */
-	drive->io_32bit = 1;
-	HWIF(drive)->drives[!drive->select.b.unit].io_32bit = 1;
 }
 
+static const struct ide_port_info dtc2278_port_info __initdata = {
+	.chipset		= ide_dtc2278,
+	.host_flags		= IDE_HFLAG_SERIALIZE |
+				  IDE_HFLAG_NO_UNMASK_IRQS |
+				  IDE_HFLAG_IO_32BIT |
+				  /* disallow ->io_32bit changes */
+				  IDE_HFLAG_NO_IO_32BIT |
+				  IDE_HFLAG_NO_DMA |
+				  IDE_HFLAG_NO_AUTOTUNE,
+	.pio_mask		= ATA_PIO4,
+};
+
 static int __init dtc2278_probe(void)
 {
 	unsigned long flags;
@@ -122,23 +128,9 @@ static int __init dtc2278_probe(void)
 #endif
 	local_irq_restore(flags);
 
-	hwif->serialized = 1;
-	hwif->chipset = ide_dtc2278;
-	hwif->pio_mask = ATA_PIO4;
 	hwif->set_pio_mode = &dtc2278_set_pio_mode;
-	hwif->drives[0].no_unmask = 1;
-	hwif->drives[1].no_unmask = 1;
-	hwif->mate = mate;
-
-	mate->serialized = 1;
-	mate->chipset = ide_dtc2278;
-	mate->pio_mask = ATA_PIO4;
-	mate->drives[0].no_unmask = 1;
-	mate->drives[1].no_unmask = 1;
-	mate->mate = hwif;
-	mate->channel = 1;
-
-	ide_device_add(idx);
+
+	ide_device_add(idx, &dtc2278_port_info);
 
 	return 0;
 }

drivers/ide/legacy/falconide.c

@@ -83,7 +83,7 @@ static int __init falconide_init(void)
 		ide_init_port_data(hwif, index);
 		ide_init_port_hw(hwif, &hw);
 
-		ide_device_add(idx);
+		ide_device_add(idx, NULL);
 	}
     }
 

drivers/ide/legacy/gayle.c

@@ -186,7 +186,7 @@ static int __init gayle_init(void)
 	    release_mem_region(res_start, res_n);
     }
 
-    ide_device_add(idx);
+    ide_device_add(idx, NULL);
 
     return 0;
 }

drivers/ide/legacy/ht6560b.c

@@ -300,16 +300,36 @@ static void ht6560b_set_pio_mode(ide_drive_t *drive, const u8 pio)
 #endif
 }
 
+static void __init ht6560b_port_init_devs(ide_hwif_t *hwif)
+{
+	/* Setting default configurations for drives. */
+	int t = (HT_CONFIG_DEFAULT << 8) | HT_TIMING_DEFAULT;
+
+	if (hwif->channel)
+		t |= (HT_SECONDARY_IF << 8);
+
+	hwif->drives[0].drive_data = t;
+	hwif->drives[1].drive_data = t;
+}
+
 int probe_ht6560b = 0;
 
 module_param_named(probe, probe_ht6560b, bool, 0);
 MODULE_PARM_DESC(probe, "probe for HT6560B chipset");
 
+static const struct ide_port_info ht6560b_port_info __initdata = {
+	.chipset		= ide_ht6560b,
+	.host_flags		= IDE_HFLAG_SERIALIZE | /* is this needed? */
+				  IDE_HFLAG_NO_DMA |
+				  IDE_HFLAG_NO_AUTOTUNE |
+				  IDE_HFLAG_ABUSE_PREFETCH,
+	.pio_mask		= ATA_PIO5,
+};
+
 static int __init ht6560b_init(void)
 {
 	ide_hwif_t *hwif, *mate;
 	static u8 idx[4] = { 0, 1, 0xff, 0xff };
-	int t;
 
 	if (probe_ht6560b == 0)
 		return -ENODEV;
@@ -328,36 +348,16 @@ static int __init ht6560b_init(void)
 		goto release_region;
 	}
 
-	hwif->chipset = ide_ht6560b;
 	hwif->selectproc = &ht6560b_selectproc;
-	hwif->host_flags = IDE_HFLAG_ABUSE_PREFETCH;
-	hwif->pio_mask = ATA_PIO5;
 	hwif->set_pio_mode = &ht6560b_set_pio_mode;
-	hwif->serialized = 1;	/* is this needed? */
-	hwif->mate = mate;
 
-	mate->chipset = ide_ht6560b;
 	mate->selectproc = &ht6560b_selectproc;
-	mate->host_flags = IDE_HFLAG_ABUSE_PREFETCH;
-	mate->pio_mask = ATA_PIO5;
 	mate->set_pio_mode = &ht6560b_set_pio_mode;
-	mate->serialized = 1;	/* is this needed? */
-	mate->mate = hwif;
-	mate->channel = 1;
-
-	/*
-	 * Setting default configurations for drives
-	 */
-	t = (HT_CONFIG_DEFAULT << 8);
-	t |= HT_TIMING_DEFAULT;
-	hwif->drives[0].drive_data = t;
-	hwif->drives[1].drive_data = t;
 
-	t |= (HT_SECONDARY_IF << 8);
-	mate->drives[0].drive_data = t;
-	mate->drives[1].drive_data = t;
+	hwif->port_init_devs = ht6560b_port_init_devs;
+	mate->port_init_devs = ht6560b_port_init_devs;
 
-	ide_device_add(idx);
+	ide_device_add(idx, &ht6560b_port_info);
 
 	return 0;
 

drivers/ide/legacy/ide-cs.c

@@ -145,13 +145,36 @@ static void ide_detach(struct pcmcia_device *link)
 
 static int idecs_register(unsigned long io, unsigned long ctl, unsigned long irq, struct pcmcia_device *handle)
 {
+    ide_hwif_t *hwif;
     hw_regs_t hw;
+    int i;
+    u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
+
     memset(&hw, 0, sizeof(hw));
-    ide_init_hwif_ports(&hw, io, ctl, NULL);
+    ide_std_init_ports(&hw, io, ctl);
     hw.irq = irq;
     hw.chipset = ide_pci;
     hw.dev = &handle->dev;
-    return ide_register_hw(&hw, &ide_undecoded_slave, NULL);
+
+    hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+    if (hwif == NULL)
+	return -1;
+
+    i = hwif->index;
+
+    if (hwif->present)
+	ide_unregister(i, 0, 0);
+    else if (!hwif->hold)
+	ide_init_port_data(hwif, i);
+
+    ide_init_port_hw(hwif, &hw);
+    hwif->quirkproc = &ide_undecoded_slave;
+
+    idx[0] = i;
+
+    ide_device_add(idx, NULL);
+
+    return hwif->present ? i : -1;
 }
 
 /*======================================================================
@@ -337,7 +360,7 @@ void ide_release(struct pcmcia_device *link)
     if (info->ndev) {
 	/* FIXME: if this fails we need to queue the cleanup somehow
 	   -- need to investigate the required PCMCIA magic */
-	ide_unregister(info->hd);
+	ide_unregister(info->hd, 0, 0);
     }
     info->ndev = 0;
 

drivers/ide/legacy/ide_platform.c

@@ -108,7 +108,7 @@ static int __devinit plat_ide_probe(struct platform_device *pdev)
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, NULL);
 
 	platform_set_drvdata(pdev, hwif);
 
@@ -122,7 +122,7 @@ static int __devexit plat_ide_remove(struct platform_device *pdev)
 {
 	ide_hwif_t *hwif = pdev->dev.driver_data;
 
-	ide_unregister(hwif->index);
+	ide_unregister(hwif->index, 0, 0);
 
 	return 0;
 }

drivers/ide/legacy/macide.c

@@ -123,19 +123,9 @@ static int __init macide_init(void)
 		ide_init_port_data(hwif, index);
 		ide_init_port_hw(hwif, &hw);
 
-		if (macintosh_config->ide_type == MAC_IDE_BABOON &&
-		    macintosh_config->ident == MAC_MODEL_PB190) {
-			/* Fix breakage in ide-disk.c: drive capacity	*/
-			/* is not initialized for drives without a 	*/
-			/* hardware ID, and we can't get that without	*/
-			/* probing the drive which freezes a 190.	*/
-			ide_drive_t *drive = &hwif->drives[0];
-			drive->capacity64 = drive->cyl*drive->head*drive->sect;
-		}
-
 		hwif->mmio = 1;
 
-		ide_device_add(idx);
+		ide_device_add(idx, NULL);
 	}
 
 	return 0;

drivers/ide/legacy/q40ide.c

@@ -154,7 +154,7 @@ static int __init q40ide_init(void)
 	}
     }
 
-    ide_device_add(idx);
+    ide_device_add(idx, NULL);
 
     return 0;
 }

drivers/ide/legacy/qd65xx.c

@@ -305,18 +305,33 @@ static int __init qd_testreg(int port)
  * called to setup an ata channel : adjusts attributes & links for tuning
  */
 
-static void __init qd_setup(ide_hwif_t *hwif, int base, int config,
-			    unsigned int data0, unsigned int data1)
+static void __init qd_setup(ide_hwif_t *hwif, int base, int config)
 {
-	hwif->chipset = ide_qd65xx;
-	hwif->channel = hwif->index;
 	hwif->select_data = base;
 	hwif->config_data = config;
-	hwif->drives[0].drive_data = data0;
-	hwif->drives[1].drive_data = data1;
-	hwif->drives[0].io_32bit =
-	hwif->drives[1].io_32bit = 1;
-	hwif->pio_mask = ATA_PIO4;
+}
+
+static void __init qd6500_port_init_devs(ide_hwif_t *hwif)
+{
+	u8 base = hwif->select_data, config = QD_CONFIG(hwif);
+
+	hwif->drives[0].drive_data = QD6500_DEF_DATA;
+	hwif->drives[1].drive_data = QD6500_DEF_DATA;
+}
+
+static void __init qd6580_port_init_devs(ide_hwif_t *hwif)
+{
+	u16 t1, t2;
+	u8 base = hwif->select_data, config = QD_CONFIG(hwif);
+
+	if (QD_CONTROL(hwif) & QD_CONTR_SEC_DISABLED) {
+		t1 = QD6580_DEF_DATA;
+		t2 = QD6580_DEF_DATA2;
+	} else
+		t2 = t1 = hwif->channel ? QD6580_DEF_DATA2 : QD6580_DEF_DATA;
+
+	hwif->drives[0].drive_data = t1;
+	hwif->drives[1].drive_data = t2;
 }
 
 /*
@@ -356,6 +371,14 @@ static void __exit qd_unsetup(ide_hwif_t *hwif)
 }
 */
 
+static const struct ide_port_info qd65xx_port_info __initdata = {
+	.chipset		= ide_qd65xx,
+	.host_flags		= IDE_HFLAG_IO_32BIT |
+				  IDE_HFLAG_NO_DMA |
+				  IDE_HFLAG_NO_AUTOTUNE,
+	.pio_mask		= ATA_PIO4,
+};
+
 /*
  * qd_probe:
  *
@@ -393,13 +416,14 @@ static int __init qd_probe(int base)
 			return 1;
 		}
 
-		qd_setup(hwif, base, config, QD6500_DEF_DATA, QD6500_DEF_DATA);
+		qd_setup(hwif, base, config);
 
+		hwif->port_init_devs = qd6500_port_init_devs;
 		hwif->set_pio_mode = &qd6500_set_pio_mode;
 
-		idx[0] = unit;
+		idx[unit] = unit;
 
-		ide_device_add(idx);
+		ide_device_add(idx, &qd65xx_port_info);
 
 		return 1;
 	}
@@ -426,14 +450,15 @@ static int __init qd_probe(int base)
 			hwif = &ide_hwifs[unit];
 			printk(KERN_INFO "%s: qd6580: single IDE board\n",
 					 hwif->name);
-			qd_setup(hwif, base, config | (control << 8),
-				 QD6580_DEF_DATA, QD6580_DEF_DATA2);
 
+			qd_setup(hwif, base, config | (control << 8));
+
+			hwif->port_init_devs = qd6580_port_init_devs;
 			hwif->set_pio_mode = &qd6580_set_pio_mode;
 
-			idx[0] = unit;
+			idx[unit] = unit;
 
-			ide_device_add(idx);
+			ide_device_add(idx, &qd65xx_port_info);
 
 			outb(QD_DEF_CONTR, QD_CONTROL_PORT);
 
@@ -447,20 +472,20 @@ static int __init qd_probe(int base)
 			printk(KERN_INFO "%s&%s: qd6580: dual IDE board\n",
 					hwif->name, mate->name);
 
-			qd_setup(hwif, base, config | (control << 8),
-				 QD6580_DEF_DATA, QD6580_DEF_DATA);
+			qd_setup(hwif, base, config | (control << 8));
 
+			hwif->port_init_devs = qd6580_port_init_devs;
 			hwif->set_pio_mode = &qd6580_set_pio_mode;
 
-			qd_setup(mate, base, config | (control << 8),
-				 QD6580_DEF_DATA2, QD6580_DEF_DATA2);
+			qd_setup(mate, base, config | (control << 8));
 
+			mate->port_init_devs = qd6580_port_init_devs;
 			mate->set_pio_mode = &qd6580_set_pio_mode;
 
 			idx[0] = 0;
 			idx[1] = 1;
 
-			ide_device_add(idx);
+			ide_device_add(idx, &qd65xx_port_info);
 
 			outb(QD_DEF_CONTR, QD_CONTROL_PORT);
 

drivers/ide/legacy/umc8672.c

@@ -120,9 +120,14 @@ static void umc_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	spin_unlock_irqrestore(&ide_lock, flags);
 }
 
+static const struct ide_port_info umc8672_port_info __initdata = {
+	.chipset		= ide_umc8672,
+	.host_flags		= IDE_HFLAG_NO_DMA | IDE_HFLAG_NO_AUTOTUNE,
+	.pio_mask		= ATA_PIO4,
+};
+
 static int __init umc8672_probe(void)
 {
-	ide_hwif_t *hwif, *mate;
 	unsigned long flags;
 	static u8 idx[4] = { 0, 1, 0xff, 0xff };
 
@@ -143,21 +148,10 @@ static int __init umc8672_probe(void)
 	umc_set_speeds (current_speeds);
 	local_irq_restore(flags);
 
-	hwif = &ide_hwifs[0];
-	mate = &ide_hwifs[1];
-
-	hwif->chipset = ide_umc8672;
-	hwif->pio_mask = ATA_PIO4;
-	hwif->set_pio_mode = &umc_set_pio_mode;
-	hwif->mate = mate;
-
-	mate->chipset = ide_umc8672;
-	mate->pio_mask = ATA_PIO4;
-	mate->set_pio_mode = &umc_set_pio_mode;
-	mate->mate = hwif;
-	mate->channel = 1;
+	ide_hwifs[0].set_pio_mode = &umc_set_pio_mode;
+	ide_hwifs[1].set_pio_mode = &umc_set_pio_mode;
 
-	ide_device_add(idx);
+	ide_device_add(idx, &umc8672_port_info);
 
 	return 0;
 }

drivers/ide/mips/au1xxx-ide.c

@@ -548,6 +548,17 @@ static void auide_setup_ports(hw_regs_t *hw, _auide_hwif *ahwif)
 	*ata_regs = ahwif->regbase + (14 << AU1XXX_ATA_REG_OFFSET);
 }
 
+static const struct ide_port_info au1xxx_port_info = {
+	.host_flags		= IDE_HFLAG_POST_SET_MODE |
+				  IDE_HFLAG_NO_DMA | /* no SFF-style DMA */
+				  IDE_HFLAG_NO_IO_32BIT |
+				  IDE_HFLAG_UNMASK_IRQS,
+	.pio_mask		= ATA_PIO4,
+#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
+	.mwdma_mask		= ATA_MWDMA2,
+#endif
+};
+
 static int au_ide_probe(struct device *dev)
 {
 	struct platform_device *pdev = to_platform_device(dev);
@@ -606,21 +617,6 @@ static int au_ide_probe(struct device *dev)
 
 	hwif->dev = dev;
 
-	hwif->ultra_mask                = 0x0;  /* Disable Ultra DMA */
-#ifdef CONFIG_BLK_DEV_IDE_AU1XXX_MDMA2_DBDMA
-	hwif->mwdma_mask                = 0x07; /* Multimode-2 DMA  */
-	hwif->swdma_mask                = 0x00;
-#else
-	hwif->mwdma_mask                = 0x0;
-	hwif->swdma_mask                = 0x0;
-#endif
-
-	hwif->pio_mask = ATA_PIO4;
-	hwif->host_flags = IDE_HFLAG_POST_SET_MODE;
-
-	hwif->drives[0].unmask          = 1;
-	hwif->drives[1].unmask          = 1;
-
 	/* hold should be on in all cases */
 	hwif->hold                      = 1;
 
@@ -651,16 +647,9 @@ static int au_ide_probe(struct device *dev)
 	hwif->ide_dma_test_irq          = &auide_dma_test_irq;
 	hwif->dma_lost_irq		= &auide_dma_lost_irq;
 #endif
-	hwif->channel                   = 0;
 	hwif->select_data               = 0;    /* no chipset-specific code */
 	hwif->config_data               = 0;    /* no chipset-specific code */
 
-	hwif->drives[0].autotune        = 1;    /* 1=autotune, 2=noautotune, 0=default */
-	hwif->drives[1].autotune	= 1;
-
-	hwif->drives[0].no_io_32bit	= 1;
-	hwif->drives[1].no_io_32bit	= 1;
-
 	auide_hwif.hwif                 = hwif;
 	hwif->hwif_data                 = &auide_hwif;
 
@@ -671,7 +660,7 @@ static int au_ide_probe(struct device *dev)
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, &au1xxx_port_info);
 
 	dev_set_drvdata(dev, hwif);
 
@@ -688,7 +677,7 @@ static int au_ide_remove(struct device *dev)
 	ide_hwif_t *hwif = dev_get_drvdata(dev);
 	_auide_hwif *ahwif = &auide_hwif;
 
-	ide_unregister(hwif->index);
+	ide_unregister(hwif->index, 0, 0);
 
 	iounmap((void *)ahwif->regbase);
 

drivers/ide/mips/swarm.c

@@ -129,7 +129,7 @@ static int __devinit swarm_ide_probe(struct device *dev)
 
 	idx[0] = hwif->index;
 
-	ide_device_add(idx);
+	ide_device_add(idx, NULL);
 
 	dev_set_drvdata(dev, hwif);
 

drivers/ide/pci/aec62xx.c

@@ -7,7 +7,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/delay.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
@@ -166,6 +165,16 @@ static unsigned int __devinit init_chipset_aec62xx(struct pci_dev *dev, const ch
 	return dev->irq;
 }
 
+static u8 __devinit atp86x_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+	pci_read_config_byte(dev, 0x49, &ata66);
+
+	return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
 static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -174,21 +183,10 @@ static void __devinit init_hwif_aec62xx(ide_hwif_t *hwif)
 
 	if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
 		hwif->set_dma_mode = &aec6210_set_mode;
-	else
+	else {
 		hwif->set_dma_mode = &aec6260_set_mode;
 
-	if (hwif->dma_base == 0)
-		return;
-
-	if (dev->device == PCI_DEVICE_ID_ARTOP_ATP850UF)
-		return;
-
-	if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
-		u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
-
-		pci_read_config_byte(dev, 0x49, &ata66);
-
-		hwif->cbl = (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+		hwif->cable_detect = atp86x_cable_detect;
 	}
 }
 

drivers/ide/pci/alim15x3.c

@@ -31,7 +31,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/pci.h>
-#include <linux/delay.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
@@ -666,13 +665,12 @@ static void __devinit init_hwif_common_ali15x3 (ide_hwif_t *hwif)
 	hwif->set_dma_mode = &ali_set_dma_mode;
 	hwif->udma_filter = &ali_udma_filter;
 
+	hwif->cable_detect = ata66_ali15x3;
+
 	if (hwif->dma_base == 0)
 		return;
 
 	hwif->dma_setup = &ali15x3_dma_setup;
-
-	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
-		hwif->cbl = ata66_ali15x3(hwif);
 }
 
 /**

drivers/ide/pci/amd74xx.c

@@ -17,12 +17,9 @@
 
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/ide.h>
-#include <asm/io.h>
 
 #include "ide-timing.h"
 
@@ -199,6 +196,14 @@ static unsigned int __devinit init_chipset_amd74xx(struct pci_dev *dev,
 	return dev->irq;
 }
 
+static u8 __devinit amd_cable_detect(ide_hwif_t *hwif)
+{
+	if ((amd_80w >> hwif->channel) & 1)
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
 static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
@@ -209,15 +214,7 @@ static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
 	hwif->set_pio_mode = &amd_set_pio_mode;
 	hwif->set_dma_mode = &amd_set_drive;
 
-	if (!hwif->dma_base)
-		return;
-
-	if (hwif->cbl != ATA_CBL_PATA40_SHORT) {
-		if ((amd_80w >> hwif->channel) & 1)
-			hwif->cbl = ATA_CBL_PATA80;
-		else
-			hwif->cbl = ATA_CBL_PATA40;
-	}
+	hwif->cable_detect = amd_cable_detect;
 }
 
 #define IDE_HFLAGS_AMD \

drivers/ide/pci/atiixp.c

@@ -6,15 +6,11 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/ioport.h>
 #include <linux/pci.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
-#include <linux/delay.h>
 #include <linux/init.h>
 
-#include <asm/io.h>
-
 #define ATIIXP_IDE_PIO_TIMING		0x40
 #define ATIIXP_IDE_MDMA_TIMING		0x44
 #define ATIIXP_IDE_PIO_CONTROL		0x48
@@ -121,6 +117,19 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	spin_unlock_irqrestore(&atiixp_lock, flags);
 }
 
+static u8 __devinit atiixp_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *pdev = to_pci_dev(hwif->dev);
+	u8 udma_mode = 0, ch = hwif->channel;
+
+	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
+
+	if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
+		return ATA_CBL_PATA80;
+	else
+		return ATA_CBL_PATA40;
+}
+
 /**
  *	init_hwif_atiixp		-	fill in the hwif for the ATIIXP
  *	@hwif: IDE interface
@@ -131,21 +140,10 @@ static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
 
 static void __devinit init_hwif_atiixp(ide_hwif_t *hwif)
 {
-	struct pci_dev *pdev = to_pci_dev(hwif->dev);
-	u8 udma_mode = 0, ch = hwif->channel;
-
 	hwif->set_pio_mode = &atiixp_set_pio_mode;
 	hwif->set_dma_mode = &atiixp_set_dma_mode;
 
-	if (!hwif->dma_base)
-		return;
-
-	pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
-
-	if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
-		hwif->cbl = ATA_CBL_PATA80;
-	else
-		hwif->cbl = ATA_CBL_PATA40;
+	hwif->cable_detect = atiixp_cable_detect;
 }
 
 static const struct ide_port_info atiixp_pci_info[] __devinitdata = {

drivers/ide/pci/cmd640.c

@@ -103,10 +103,6 @@
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
@@ -703,6 +699,18 @@ static int pci_conf2(void)
 	return 0;
 }
 
+static const struct ide_port_info cmd640_port_info __initdata = {
+	.chipset		= ide_cmd640,
+	.host_flags		= IDE_HFLAG_SERIALIZE |
+				  IDE_HFLAG_NO_DMA |
+				  IDE_HFLAG_NO_AUTOTUNE |
+				  IDE_HFLAG_ABUSE_PREFETCH |
+				  IDE_HFLAG_ABUSE_FAST_DEVSEL,
+#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
+	.pio_mask		= ATA_PIO5,
+#endif
+};
+
 /*
  * Probe for a cmd640 chipset, and initialize it if found.
  */
@@ -760,11 +768,7 @@ static int __init cmd640x_init(void)
 	setup_device_ptrs ();
 	printk("%s: buggy cmd640%c interface on %s, config=0x%02x\n",
 	       cmd_hwif0->name, 'a' + cmd640_chip_version - 1, bus_type, cfr);
-	cmd_hwif0->chipset = ide_cmd640;
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-	cmd_hwif0->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
-				IDE_HFLAG_ABUSE_FAST_DEVSEL;
-	cmd_hwif0->pio_mask = ATA_PIO5;
 	cmd_hwif0->set_pio_mode = &cmd640_set_pio_mode;
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 
@@ -815,23 +819,14 @@ static int __init cmd640x_init(void)
 	 * Initialize data for secondary cmd640 port, if enabled
 	 */
 	if (second_port_cmd640) {
-		cmd_hwif0->serialized = 1;
-		cmd_hwif1->serialized = 1;
-		cmd_hwif1->chipset = ide_cmd640;
-		cmd_hwif0->mate = cmd_hwif1;
-		cmd_hwif1->mate = cmd_hwif0;
-		cmd_hwif1->channel = 1;
 #ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-		cmd_hwif1->host_flags = IDE_HFLAG_ABUSE_PREFETCH |
-					IDE_HFLAG_ABUSE_FAST_DEVSEL;
-		cmd_hwif1->pio_mask = ATA_PIO5;
 		cmd_hwif1->set_pio_mode = &cmd640_set_pio_mode;
 #endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
 
 		idx[1] = cmd_hwif1->index;
 	}
 	printk(KERN_INFO "%s: %sserialized, secondary interface %s\n", cmd_hwif1->name,
-		cmd_hwif0->serialized ? "" : "not ", port2);
+			 second_port_cmd640 ? "" : "not ", port2);
 
 	/*
 	 * Establish initial timings/prefetch for all drives.
@@ -876,7 +871,7 @@ static int __init cmd640x_init(void)
 	cmd640_dump_regs();
 #endif
 
-	ide_device_add(idx);
+	ide_device_add(idx, &cmd640_port_info);
 
 	return 1;
 }

drivers/ide/pci/cmd64x.c

@@ -13,7 +13,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/delay.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
@@ -393,6 +392,8 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
 	hwif->set_pio_mode = &cmd64x_set_pio_mode;
 	hwif->set_dma_mode = &cmd64x_set_dma_mode;
 
+	hwif->cable_detect = ata66_cmd64x;
+
 	if (!hwif->dma_base)
 		return;
 
@@ -411,9 +412,6 @@ static void __devinit init_hwif_cmd64x(ide_hwif_t *hwif)
 	if (dev->device == PCI_DEVICE_ID_CMD_646 && dev->revision < 5)
 		hwif->ultra_mask = 0x00;
 
-	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
-		hwif->cbl = ata66_cmd64x(hwif);
-
 	switch (dev->device) {
 	case PCI_DEVICE_ID_CMD_648:
 	case PCI_DEVICE_ID_CMD_649:

drivers/ide/pci/cs5520.c

@@ -35,22 +35,12 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
-
-#include <linux/interrupt.h>
 #include <linux/init.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
 #include <linux/dma-mapping.h>
 
-#include <asm/io.h>
-#include <asm/irq.h>
-
 struct pio_clocks
 {
 	int address;
@@ -180,7 +170,7 @@ static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_devic
 
 	ide_pci_setup_ports(dev, d, 14, &idx[0]);
 
-	ide_device_add(idx);
+	ide_device_add(idx, d);
 
 	return 0;
 }

drivers/ide/pci/cs5530.c

@@ -15,18 +15,12 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
-#include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/ide.h>
+
 #include <asm/io.h>
-#include <asm/irq.h>
 
 /*
  * Here are the standard PIO mode 0-4 timings for each "format".

drivers/ide/pci/cs5535.c

@@ -155,8 +155,9 @@ static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
 	cs5535_set_speed(drive, XFER_PIO_0 + pio);
 }
 
-static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
+static u8 __devinit cs5535_cable_detect(ide_hwif_t *hwif)
 {
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
 	u8 bit;
 
 	/* if a 80 wire cable was detected */
@@ -175,15 +176,10 @@ static u8 __devinit cs5535_cable_detect(struct pci_dev *dev)
  */
 static void __devinit init_hwif_cs5535(ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-
 	hwif->set_pio_mode = &cs5535_set_pio_mode;
 	hwif->set_dma_mode = &cs5535_set_dma_mode;
 
-	if (hwif->dma_base == 0)
-		return;
-
-	hwif->cbl = cs5535_cable_detect(dev);
+	hwif->cable_detect = cs5535_cable_detect;
 }
 
 static const struct ide_port_info cs5535_chipset __devinitdata = {

drivers/ide/pci/cy82c693.c

@@ -45,7 +45,6 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/pci.h>
-#include <linux/delay.h>
 #include <linux/ide.h>
 #include <linux/init.h>
 

drivers/ide/pci/delkin_cb.c

@@ -16,15 +16,14 @@
  *  License.  See the file COPYING in the main directory of this archive for
  *  more details.
  */
-#include <linux/autoconf.h>
+
 #include <linux/types.h>
 #include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
 #include <linux/pci.h>
+
 #include <asm/io.h>
 
 /*
@@ -52,6 +51,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 	ide_hwif_t *hwif = NULL;
 	ide_drive_t *drive;
 	int i, rc;
+	u8 idx[4] = { 0xff, 0xff, 0xff, 0xff };
 
 	rc = pci_enable_device(dev);
 	if (rc) {
@@ -78,12 +78,27 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 	hw.irq = dev->irq;
 	hw.chipset = ide_pci;		/* this enables IRQ sharing */
 
-	rc = ide_register_hw(&hw, &ide_undecoded_slave, &hwif);
-	if (rc < 0) {
-		printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc);
-		pci_disable_device(dev);
-		return -ENODEV;
-	}
+	hwif = ide_deprecated_find_port(hw.io_ports[IDE_DATA_OFFSET]);
+	if (hwif == NULL)
+		goto out_disable;
+
+	i = hwif->index;
+
+	if (hwif->present)
+		ide_unregister(i, 0, 0);
+	else if (!hwif->hold)
+		ide_init_port_data(hwif, i);
+
+	ide_init_port_hw(hwif, &hw);
+	hwif->quirkproc = &ide_undecoded_slave;
+
+	idx[0] = i;
+
+	ide_device_add(idx, NULL);
+
+	if (!hwif->present)
+		goto out_disable;
+
 	pci_set_drvdata(dev, hwif);
 	hwif->dev = &dev->dev;
 	drive = &hwif->drives[0];
@@ -92,6 +107,11 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
 		drive->unmask   = 1;
 	}
 	return 0;
+
+out_disable:
+	printk(KERN_ERR "delkin_cb: no IDE devices found\n");
+	pci_disable_device(dev);
+	return -ENODEV;
 }
 
 static void
@@ -100,7 +120,8 @@ delkin_cb_remove (struct pci_dev *dev)
 	ide_hwif_t *hwif = pci_get_drvdata(dev);
 
 	if (hwif)
-		ide_unregister(hwif->index);
+		ide_unregister(hwif->index, 0, 0);
+
 	pci_disable_device(dev);
 }
 

drivers/ide/pci/generic.c

@@ -22,18 +22,11 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/pci.h>
 #include <linux/ide.h>
 #include <linux/init.h>
 
-#include <asm/io.h>
-
 static int ide_generic_all;		/* Set to claim all devices */
 
 /*

drivers/ide/pci/hpt34x.c

@@ -26,20 +26,13 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
 #include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/ide.h>
 
-#include <asm/io.h>
-#include <asm/irq.h>
-
 #define HPT343_DEBUG_DRIVE_INFO		0
 
 static void hpt34x_set_mode(ide_drive_t *drive, const u8 speed)

drivers/ide/pci/hpt366.c

@@ -121,12 +121,8 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
 #include <linux/blkdev.h>
 #include <linux/hdreg.h>
-
 #include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
@@ -134,7 +130,6 @@
 
 #include <asm/uaccess.h>
 #include <asm/io.h>
-#include <asm/irq.h>
 
 /* various tuning parameters */
 #define HPT_RESET_STATE_ENGINE
@@ -1279,12 +1274,55 @@ static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const cha
 	return dev->irq;
 }
 
+static u8 __devinit hpt3xx_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev	*dev	= to_pci_dev(hwif->dev);
+	struct hpt_info *info	= pci_get_drvdata(dev);
+	u8 chip_type		= info->chip_type;
+	u8 scr1 = 0, ata66	= hwif->channel ? 0x01 : 0x02;
+
+	/*
+	 * The HPT37x uses the CBLID pins as outputs for MA15/MA16
+	 * address lines to access an external EEPROM.  To read valid
+	 * cable detect state the pins must be enabled as inputs.
+	 */
+	if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
+		/*
+		 * HPT374 PCI function 1
+		 * - set bit 15 of reg 0x52 to enable TCBLID as input
+		 * - set bit 15 of reg 0x56 to enable FCBLID as input
+		 */
+		u8  mcr_addr = hwif->select_data + 2;
+		u16 mcr;
+
+		pci_read_config_word(dev, mcr_addr, &mcr);
+		pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
+		/* now read cable id register */
+		pci_read_config_byte(dev, 0x5a, &scr1);
+		pci_write_config_word(dev, mcr_addr, mcr);
+	} else if (chip_type >= HPT370) {
+		/*
+		 * HPT370/372 and 374 pcifn 0
+		 * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
+		 */
+		u8 scr2 = 0;
+
+		pci_read_config_byte(dev, 0x5b, &scr2);
+		pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
+		/* now read cable id register */
+		pci_read_config_byte(dev, 0x5a, &scr1);
+		pci_write_config_byte(dev, 0x5b,  scr2);
+	} else
+		pci_read_config_byte(dev, 0x5a, &scr1);
+
+	return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
 static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 {
 	struct pci_dev *dev	= to_pci_dev(hwif->dev);
 	struct hpt_info *info	= pci_get_drvdata(dev);
 	int serialize		= HPT_SERIALIZE_IO;
-	u8  scr1 = 0, ata66	= hwif->channel ? 0x01 : 0x02;
 	u8  chip_type		= info->chip_type;
 	u8  new_mcr, old_mcr	= 0;
 
@@ -1301,6 +1339,8 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 	hwif->udma_filter	= &hpt3xx_udma_filter;
 	hwif->mdma_filter	= &hpt3xx_mdma_filter;
 
+	hwif->cable_detect	= hpt3xx_cable_detect;
+
 	/*
 	 * HPT3xxN chips have some complications:
 	 *
@@ -1346,43 +1386,6 @@ static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
 	if (hwif->dma_base == 0)
 		return;
 
-	/*
-	 * The HPT37x uses the CBLID pins as outputs for MA15/MA16
-	 * address lines to access an external EEPROM.  To read valid
-	 * cable detect state the pins must be enabled as inputs.
-	 */
-	if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
-		/*
-		 * HPT374 PCI function 1
-		 * - set bit 15 of reg 0x52 to enable TCBLID as input
-		 * - set bit 15 of reg 0x56 to enable FCBLID as input
-		 */
-		u8  mcr_addr = hwif->select_data + 2;
-		u16 mcr;
-
-		pci_read_config_word (dev, mcr_addr, &mcr);
-		pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
-		/* now read cable id register */
-		pci_read_config_byte (dev, 0x5a, &scr1);
-		pci_write_config_word(dev, mcr_addr, mcr);
-	} else if (chip_type >= HPT370) {
-		/*
-		 * HPT370/372 and 374 pcifn 0
-		 * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
-		 */
-		u8 scr2 = 0;
-
-		pci_read_config_byte (dev, 0x5b, &scr2);
-		pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
-		/* now read cable id register */
-		pci_read_config_byte (dev, 0x5a, &scr1);
-		pci_write_config_byte(dev, 0x5b,  scr2);
-	} else
-		pci_read_config_byte (dev, 0x5a, &scr1);
-
-	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
-		hwif->cbl = (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-
 	if (chip_type >= HPT374) {
 		hwif->ide_dma_test_irq	= &hpt374_ide_dma_test_irq;
 		hwif->ide_dma_end	= &hpt374_ide_dma_end;

drivers/ide/pci/it8213.c

@@ -10,13 +10,10 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/delay.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
 
-#include <asm/io.h>
-
 /**
  *	it8213_set_pio_mode	-	set host controller for PIO mode
  *	@drive: drive
@@ -143,6 +140,16 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 	}
 }
 
+static u8 __devinit it8213_cable_detect(ide_hwif_t *hwif)
+{
+	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	u8 reg42h = 0;
+
+	pci_read_config_byte(dev, 0x42, &reg42h);
+
+	return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+}
+
 /**
  *	init_hwif_it8213	-	set up hwif structs
  *	@hwif: interface to set up
@@ -152,19 +159,10 @@ static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
 
 static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
 {
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	u8 reg42h = 0;
-
 	hwif->set_dma_mode = &it8213_set_dma_mode;
 	hwif->set_pio_mode = &it8213_set_pio_mode;
 
-	if (!hwif->dma_base)
-		return;
-
-	pci_read_config_byte(dev, 0x42, &reg42h);
-
-	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
-		hwif->cbl = (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
+	hwif->cable_detect = it8213_cable_detect;
 }
 
 

drivers/ide/pci/it821x.c

@@ -63,13 +63,10 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/delay.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
 
-#include <asm/io.h>
-
 struct it821x_dev
 {
 	unsigned int smart:1,		/* Are we in smart raid mode */
@@ -579,14 +576,13 @@ static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
 	} else
 		hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
 
+	hwif->cable_detect = ata66_it821x;
+
 	if (hwif->dma_base == 0)
 		return;
 
 	hwif->ultra_mask = ATA_UDMA6;
 	hwif->mwdma_mask = ATA_MWDMA2;
-
-	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
-		hwif->cbl = ata66_it821x(hwif);
 }
 
 static void __devinit it8212_disable_raid(struct pci_dev *dev)

drivers/ide/pci/jmicron.c

@@ -8,13 +8,10 @@
 #include <linux/types.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/delay.h>
 #include <linux/hdreg.h>
 #include <linux/ide.h>
 #include <linux/init.h>
 
-#include <asm/io.h>
-
 typedef enum {
 	PORT_PATA0 = 0,
 	PORT_PATA1 = 1,
@@ -111,11 +108,7 @@ static void __devinit init_hwif_jmicron(ide_hwif_t *hwif)
 	hwif->set_pio_mode = &jmicron_set_pio_mode;
 	hwif->set_dma_mode = &jmicron_set_dma_mode;
 
-	if (hwif->dma_base == 0)
-		return;
-
-	if (hwif->cbl != ATA_CBL_PATA40_SHORT)
-		hwif->cbl = ata66_jmicron(hwif);
+	hwif->cable_detect = ata66_jmicron;
 }
 
 static const struct ide_port_info jmicron_chipset __devinitdata = {

drivers/ide/pci/ns87415.c

@@ -10,11 +10,7 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
 #include <linux/interrupt.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
 #include <linux/pci.h>
 #include <linux/delay.h>

drivers/ide/pci/sc1200.c

@@ -14,19 +14,13 @@
 #include <linux/module.h>
 #include <linux/types.h>
 #include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/mm.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
 #include <linux/hdreg.h>
-#include <linux/interrupt.h>
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/ide.h>
 #include <linux/pm.h>
+
 #include <asm/io.h>
-#include <asm/irq.h>
 
 #define SC1200_REV_A	0x00
 #define SC1200_REV_B1	0x01