ARM: imx5: remove imx51 non-DT support files

Since i.MX51 becomes a DT only platform, those non-DT support files can
be removed now.
Signed-off-by: NShawn Guo <shawn.guo@freescale.com>

arch/arm/mach-imx/Makefile

@@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
 
 imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y)
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
 
 obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
 			    clk-pfd.o clk-busy.o clk.o \

arch/arm/mach-imx/devices-imx51.h

-/*
- * Copyright (C) 2010 Pengutronix
- * Uwe Kleine-Koenig <u.kleine-koenig@pengutronix.de>
- *
- * This program is free software; you can redistribute it and/or modify it under
- * the terms of the GNU General Public License version 2 as published by the
- * Free Software Foundation.
- */
-#include "devices/devices-common.h"
-
-extern const struct imx_fec_data imx51_fec_data;
-#define imx51_add_fec(pdata)	\
-	imx_add_fec(&imx51_fec_data, pdata)
-
-extern const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data;
-#define imx51_add_fsl_usb2_udc(pdata)	\
-	imx_add_fsl_usb2_udc(&imx51_fsl_usb2_udc_data, pdata)
-
-extern const struct imx_imx_i2c_data imx51_imx_i2c_data[];
-#define imx51_add_imx_i2c(id, pdata)	\
-	imx_add_imx_i2c(&imx51_imx_i2c_data[id], pdata)
-#define imx51_add_hsi2c(pdata)	\
-	imx51_add_imx_i2c(2, pdata)
-
-extern const struct imx_imx_ssi_data imx51_imx_ssi_data[];
-#define imx51_add_imx_ssi(id, pdata)	\
-	imx_add_imx_ssi(&imx51_imx_ssi_data[id], pdata)
-
-extern const struct imx_imx_uart_1irq_data imx51_imx_uart_data[];
-#define imx51_add_imx_uart(id, pdata)	\
-	imx_add_imx_uart_1irq(&imx51_imx_uart_data[id], pdata)
-
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_otg_data;
-#define imx51_add_mxc_ehci_otg(pdata)	\
-	imx_add_mxc_ehci(&imx51_mxc_ehci_otg_data, pdata)
-extern const struct imx_mxc_ehci_data imx51_mxc_ehci_hs_data[];
-#define imx51_add_mxc_ehci_hs(id, pdata)	\
-	imx_add_mxc_ehci(&imx51_mxc_ehci_hs_data[id - 1], pdata)
-
-extern const struct imx_mxc_nand_data imx51_mxc_nand_data;
-#define imx51_add_mxc_nand(pdata)	\
-	imx_add_mxc_nand(&imx51_mxc_nand_data, pdata)
-
-extern const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[];
-#define imx51_add_sdhci_esdhc_imx(id, pdata)	\
-	imx_add_sdhci_esdhc_imx(&imx51_sdhci_esdhc_imx_data[id], pdata)
-
-extern const struct imx_spi_imx_data imx51_cspi_data;
-#define imx51_add_cspi(pdata)	\
-	imx_add_spi_imx(&imx51_cspi_data, pdata)
-
-extern const struct imx_spi_imx_data imx51_ecspi_data[];
-#define imx51_add_ecspi(id, pdata)	\
-	imx_add_spi_imx(&imx51_ecspi_data[id], pdata)
-
-extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[];
-#define imx51_add_imx2_wdt(id)	\
-	imx_add_imx2_wdt(&imx51_imx2_wdt_data[id])
-
-extern const struct imx_imx_keypad_data imx51_imx_keypad_data;
-#define imx51_add_imx_keypad(pdata)	\
-	imx_add_imx_keypad(&imx51_imx_keypad_data, pdata)
-
-extern const struct imx_pata_imx_data imx51_pata_imx_data;
-#define imx51_add_pata_imx() \
-	imx_add_pata_imx(&imx51_pata_imx_data)

arch/arm/mach-imx/ehci-imx5.c

-/*
- * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
- * Copyright (C) 2010 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- * for more details.
- */
-
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/platform_data/usb-ehci-mxc.h>
-
-#include "ehci.h"
-#include "hardware.h"
-
-#define MXC_OTG_OFFSET			0
-#define MXC_H1_OFFSET			0x200
-#define MXC_H2_OFFSET			0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)	/* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_POL_BIT	(1 << 9)	/* OTG Polarity of Overcurrent */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_POL_BIT		(1 << 6)	/* UH1 Polarity of Overcurrent */
-#define MXC_H1_OC_DIS_BIT		(1 << 5)	/* UH1 Disable Overcurrent Event */
-#define MXC_OTG_PHYCTRL_PWR_POL_BIT	(1 << 3)	/* OTG Power Pin Polarity */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
-
-#define MXC_USBCMD_OFFSET		0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
-
-int mx51_initialize_usb_hw(int port, unsigned int flags)
-{
-	unsigned int v;
-	void __iomem *usb_base;
-	void __iomem *usbotg_base;
-	void __iomem *usbother_base;
-	int ret = 0;
-
-	usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K);
-	if (!usb_base) {
-		printk(KERN_ERR "%s(): ioremap failed\n", __func__);
-		return -ENOMEM;
-	}
-
-	switch (port) {
-	case 0:	/* OTG port */
-		usbotg_base = usb_base + MXC_OTG_OFFSET;
-		break;
-	case 1:	/* Host 1 port */
-		usbotg_base = usb_base + MXC_H1_OFFSET;
-		break;
-	case 2: /* Host 2 port */
-		usbotg_base = usb_base + MXC_H2_OFFSET;
-		break;
-	default:
-		printk(KERN_ERR"%s no such port %d\n", __func__, port);
-		ret = -ENOENT;
-		goto error;
-	}
-	usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-	switch (port) {
-	case 0:	/*OTG port */
-		if (flags & MXC_EHCI_INTERNAL_PHY) {
-			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
-				v |= MXC_OTG_PHYCTRL_OC_POL_BIT;
-			else
-				v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT;
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
-				/* OC/USBPWR is used */
-				v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			} else {
-				/* OC/USBPWR is not used */
-				v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
-			}
-			if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH)
-				v |= MXC_OTG_PHYCTRL_PWR_POL_BIT;
-			else
-				v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT;
-			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED)
-				v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
-			else
-				v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_OTG_UCTRL_OPM_BIT;
-			else
-				v |= MXC_OTG_UCTRL_OPM_BIT;
-			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-		}
-		break;
-	case 1:	/* Host 1 */
-		/*Host ULPI */
-		v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-			/* HOST1 wakeup/ULPI intr enable */
-			v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-		} else {
-			/* HOST1 wakeup/ULPI intr disable */
-			v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-		}
-
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/
-		else
-			v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-		__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
-		v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-		if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)
-			v |= MXC_H1_OC_POL_BIT;
-		else
-			v &= ~MXC_H1_OC_POL_BIT;
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
-		else
-			v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
-		__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-		v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
-		if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
-			/* Interrupt Threshold Control:Immediate (no threshold) */
-			v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
-		__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
-		break;
-	case 2: /* Host 2 ULPI */
-		v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
-		if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-			/* HOST1 wakeup/ULPI intr enable */
-			v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-		} else {
-			/* HOST1 wakeup/ULPI intr disable */
-			v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-		}
-
-		if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-			v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/
-		else
-			v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-		__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
-		break;
-	}
-
-error:
-	iounmap(usb_base);
-	return ret;
-}
-

arch/arm/mach-imx/ehci.h

@@ -35,13 +35,6 @@
 #define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
 #define MXC_USBH2CTRL_OFFSET		0x14
 
-#define MX5_USBOTHER_REGS_OFFSET	0x800
-
-/* USB_PHY_CTRL_FUNC2*/
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK		0x3
-#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT		0
-
-int mx51_initialize_usb_hw(int port, unsigned int flags);
 int mx25_initialize_usb_hw(int port, unsigned int flags);
 int mx31_initialize_usb_hw(int port, unsigned int flags);
 int mx35_initialize_usb_hw(int port, unsigned int flags);