batman-adv: Use inline kernel-doc for enum/struct

The inline kernel-doc comments make it easier to keep changes to the
struct/enum synchronized with the documentation of the it. And it makes it
easier for larger structures like struct batadv_priv to read the
documentation inside the code.
Signed-off-by: NSven Eckelmann <sven@narfation.org>
Signed-off-by: NSimon Wunderlich <sw@simonwunderlich.de>

net/batman-adv/bat_iv_ogm.c

@@ -73,16 +73,23 @@ static void batadv_iv_send_outstanding_bat_ogm_packet(struct work_struct *work);
 
 /**
  * enum batadv_dup_status - duplicate status
- * @BATADV_NO_DUP: the packet is no duplicate
- * @BATADV_ORIG_DUP: OGM is a duplicate in the originator (but not for the
- *  neighbor)
- * @BATADV_NEIGH_DUP: OGM is a duplicate for the neighbor
- * @BATADV_PROTECTED: originator is currently protected (after reboot)
  */
 enum batadv_dup_status {
+	/** @BATADV_NO_DUP: the packet is no duplicate */
 	BATADV_NO_DUP = 0,
+
+	/**
+	 * @BATADV_ORIG_DUP: OGM is a duplicate in the originator (but not for
+	 *  the neighbor)
+	 */
 	BATADV_ORIG_DUP,
+
+	/** @BATADV_NEIGH_DUP: OGM is a duplicate for the neighbor */
 	BATADV_NEIGH_DUP,
+
+	/**
+	 * @BATADV_PROTECTED: originator is currently protected (after reboot)
+	 */
 	BATADV_PROTECTED,
 };
 

net/batman-adv/gateway_common.h

@@ -33,11 +33,12 @@ enum batadv_gw_modes {
 
 /**
  * enum batadv_bandwidth_units - bandwidth unit types
- * @BATADV_BW_UNIT_KBIT: unit type kbit
- * @BATADV_BW_UNIT_MBIT: unit type mbit
  */
 enum batadv_bandwidth_units {
+	/** @BATADV_BW_UNIT_KBIT: unit type kbit */
 	BATADV_BW_UNIT_KBIT,
+
+	/** @BATADV_BW_UNIT_MBIT: unit type mbit */
 	BATADV_BW_UNIT_MBIT,
 };
 

net/batman-adv/hard-interface.h

@@ -42,25 +42,40 @@ enum batadv_hard_if_state {
 
 /**
  * enum batadv_hard_if_bcast - broadcast avoidance options
- * @BATADV_HARDIF_BCAST_OK: Do broadcast on according hard interface
- * @BATADV_HARDIF_BCAST_NORECIPIENT: Broadcast not needed, there is no recipient
- * @BATADV_HARDIF_BCAST_DUPFWD: There is just the neighbor we got it from
- * @BATADV_HARDIF_BCAST_DUPORIG: There is just the originator
  */
 enum batadv_hard_if_bcast {
+	/** @BATADV_HARDIF_BCAST_OK: Do broadcast on according hard interface */
 	BATADV_HARDIF_BCAST_OK = 0,
+
+	/**
+	 * @BATADV_HARDIF_BCAST_NORECIPIENT: Broadcast not needed, there is no
+	 *  recipient
+	 */
 	BATADV_HARDIF_BCAST_NORECIPIENT,
+
+	/**
+	 * @BATADV_HARDIF_BCAST_DUPFWD: There is just the neighbor we got it
+	 *  from
+	 */
 	BATADV_HARDIF_BCAST_DUPFWD,
+
+	/** @BATADV_HARDIF_BCAST_DUPORIG: There is just the originator */
 	BATADV_HARDIF_BCAST_DUPORIG,
 };
 
 /**
  * enum batadv_hard_if_cleanup - Cleanup modi for soft_iface after slave removal
- * @BATADV_IF_CLEANUP_KEEP: Don't automatically delete soft-interface
- * @BATADV_IF_CLEANUP_AUTO: Delete soft-interface after last slave was removed
  */
 enum batadv_hard_if_cleanup {
+	/**
+	 * @BATADV_IF_CLEANUP_KEEP: Don't automatically delete soft-interface
+	 */
 	BATADV_IF_CLEANUP_KEEP,
+
+	/**
+	 * @BATADV_IF_CLEANUP_AUTO: Delete soft-interface after last slave was
+	 *  removed
+	 */
 	BATADV_IF_CLEANUP_AUTO,
 };
 

net/batman-adv/log.h

@@ -45,25 +45,33 @@ static inline void batadv_debug_log_cleanup(struct batadv_priv *bat_priv)
 
 /**
  * enum batadv_dbg_level - available log levels
- * @BATADV_DBG_BATMAN: OGM and TQ computations related messages
- * @BATADV_DBG_ROUTES: route added / changed / deleted
- * @BATADV_DBG_TT: translation table messages
- * @BATADV_DBG_BLA: bridge loop avoidance messages
- * @BATADV_DBG_DAT: ARP snooping and DAT related messages
- * @BATADV_DBG_NC: network coding related messages
- * @BATADV_DBG_MCAST: multicast related messages
- * @BATADV_DBG_TP_METER: throughput meter messages
- * @BATADV_DBG_ALL: the union of all the above log levels
  */
 enum batadv_dbg_level {
+	/** @BATADV_DBG_BATMAN: OGM and TQ computations related messages */
 	BATADV_DBG_BATMAN	= BIT(0),
+
+	/** @BATADV_DBG_ROUTES: route added / changed / deleted */
 	BATADV_DBG_ROUTES	= BIT(1),
+
+	/** @BATADV_DBG_TT: translation table messages */
 	BATADV_DBG_TT		= BIT(2),
+
+	/** @BATADV_DBG_BLA: bridge loop avoidance messages */
 	BATADV_DBG_BLA		= BIT(3),
+
+	/** @BATADV_DBG_DAT: ARP snooping and DAT related messages */
 	BATADV_DBG_DAT		= BIT(4),
+
+	/** @BATADV_DBG_NC: network coding related messages */
 	BATADV_DBG_NC		= BIT(5),
+
+	/** @BATADV_DBG_MCAST: multicast related messages */
 	BATADV_DBG_MCAST	= BIT(6),
+
+	/** @BATADV_DBG_TP_METER: throughput meter messages */
 	BATADV_DBG_TP_METER	= BIT(7),
+
+	/** @BATADV_DBG_ALL: the union of all the above log levels */
 	BATADV_DBG_ALL		= 255,
 };
 

net/batman-adv/multicast.h

@@ -26,15 +26,21 @@ struct sk_buff;
 
 /**
  * enum batadv_forw_mode - the way a packet should be forwarded as
- * @BATADV_FORW_ALL: forward the packet to all nodes (currently via classic
- *  flooding)
- * @BATADV_FORW_SINGLE: forward the packet to a single node (currently via the
- *  BATMAN unicast routing protocol)
- * @BATADV_FORW_NONE: don't forward, drop it
  */
 enum batadv_forw_mode {
+	/**
+	 * @BATADV_FORW_ALL: forward the packet to all nodes (currently via
+	 *  classic flooding)
+	 */
 	BATADV_FORW_ALL,
+
+	/**
+	 * @BATADV_FORW_SINGLE: forward the packet to a single node (currently
+	 *  via the BATMAN unicast routing protocol)
+	 */
 	BATADV_FORW_SINGLE,
+
+	/** @BATADV_FORW_NONE: don't forward, drop it */
 	BATADV_FORW_NONE,
 };