Merge branch 'lan7801-mac-only'

Woojung Huh says:

====================
phy: lan78xx: add phy fixup unregister functions & LAN7801 update

V2 patch of adding phy fixup unregister function with use in LAN7801 update.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Documentation/networking/phy.txt

@@ -407,6 +407,15 @@ Board Fixups
  The stubs set one of the two matching criteria, and set the other one to
  match anything.
 
+ When phy_register_fixup() or *_for_uid()/*_for_id() is called at module,
+ unregister fixup and free allocate memory are required.
+
+ Call one of following function before unloading module.
+
+ int phy_unregister_fixup(const char *phy_id, u32 phy_uid, u32 phy_uid_mask);
+ int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask);
+ int phy_register_fixup_for_id(const char *phy_id);
+
 Standards
 
  IEEE Standard 802.3: CSMA/CD Access Method and Physical Layer Specifications, Section Two:

drivers/net/phy/phy_device.c

@@ -235,6 +235,53 @@ int phy_register_fixup_for_id(const char *bus_id,
 }
 EXPORT_SYMBOL(phy_register_fixup_for_id);
 
+/**
+ * phy_unregister_fixup - remove a phy_fixup from the list
+ * @bus_id: A string matches fixup->bus_id (or PHY_ANY_ID) in phy_fixup_list
+ * @phy_uid: A phy id matches fixup->phy_id (or PHY_ANY_UID) in phy_fixup_list
+ * @phy_uid_mask: Applied to phy_uid and fixup->phy_uid before comparison
+ */
+int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask)
+{
+	struct list_head *pos, *n;
+	struct phy_fixup *fixup;
+	int ret;
+
+	ret = -ENODEV;
+
+	mutex_lock(&phy_fixup_lock);
+	list_for_each_safe(pos, n, &phy_fixup_list) {
+		fixup = list_entry(pos, struct phy_fixup, list);
+
+		if ((!strcmp(fixup->bus_id, bus_id)) &&
+		    ((fixup->phy_uid & phy_uid_mask) ==
+		     (phy_uid & phy_uid_mask))) {
+			list_del(&fixup->list);
+			kfree(fixup);
+			ret = 0;
+			break;
+		}
+	}
+	mutex_unlock(&phy_fixup_lock);
+
+	return ret;
+}
+EXPORT_SYMBOL(phy_unregister_fixup);
+
+/* Unregisters a fixup of any PHY with the UID in phy_uid */
+int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask)
+{
+	return phy_unregister_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask);
+}
+EXPORT_SYMBOL(phy_unregister_fixup_for_uid);
+
+/* Unregisters a fixup of the PHY with id string bus_id */
+int phy_unregister_fixup_for_id(const char *bus_id)
+{
+	return phy_unregister_fixup(bus_id, PHY_ANY_UID, 0xffffffff);
+}
+EXPORT_SYMBOL(phy_unregister_fixup_for_id);
+
 /* Returns 1 if fixup matches phydev in bus_id and phy_uid.
  * Fixups can be set to match any in one or more fields.
  */

drivers/net/usb/Kconfig

@@ -114,6 +114,11 @@ config USB_LAN78XX
 	help
 	  This option adds support for Microchip LAN78XX based USB 2
 	  & USB 3 10/100/1000 Ethernet adapters.
+	  LAN7800 : USB 3 to 10/100/1000 Ethernet adapter
+	  LAN7850 : USB 2 to 10/100/1000 Ethernet adapter
+	  LAN7801 : USB 3 to 10/100/1000 Ethernet adapter (MAC only)
+
+	  Proper PHY driver is required for LAN7801.
 
 	  To compile this driver as a module, choose M here: the
 	  module will be called lan78xx.

drivers/net/usb/lan78xx.c

@@ -40,7 +40,7 @@
 #define DRIVER_AUTHOR	"WOOJUNG HUH <woojung.huh@microchip.com>"
 #define DRIVER_DESC	"LAN78XX USB 3.0 Gigabit Ethernet Devices"
 #define DRIVER_NAME	"lan78xx"
-#define DRIVER_VERSION	"1.0.5"
+#define DRIVER_VERSION	"1.0.6"
 
 #define TX_TIMEOUT_JIFFIES		(5 * HZ)
 #define THROTTLE_JIFFIES		(HZ / 8)
@@ -67,6 +67,7 @@
 #define LAN78XX_USB_VENDOR_ID		(0x0424)
 #define LAN7800_USB_PRODUCT_ID		(0x7800)
 #define LAN7850_USB_PRODUCT_ID		(0x7850)
+#define LAN7801_USB_PRODUCT_ID		(0x7801)
 #define LAN78XX_EEPROM_MAGIC		(0x78A5)
 #define LAN78XX_OTP_MAGIC		(0x78F3)
 
@@ -390,6 +391,7 @@ struct lan78xx_net {
 	u32			chipid;
 	u32			chiprev;
 	struct mii_bus		*mdiobus;
+	phy_interface_t		interface;
 
 	int			fc_autoneg;
 	u8			fc_request_control;
@@ -400,6 +402,10 @@ struct lan78xx_net {
 	struct irq_domain_data	domain_data;
 };
 
+/* define external phy id */
+#define	PHY_LAN8835			(0x0007C130)
+#define	PHY_KSZ9031RNX			(0x00221620)
+
 /* use ethtool to change the level for any given device */
 static int msg_level = -1;
 module_param(msg_level, int, 0);
@@ -1697,6 +1703,7 @@ static int lan78xx_mdiobus_read(struct mii_bus *bus, int phy_id, int idx)
 done:
 	mutex_unlock(&dev->phy_mutex);
 	usb_autopm_put_interface(dev->intf);
+
 	return ret;
 }
 
@@ -1759,6 +1766,10 @@ static int lan78xx_mdio_init(struct lan78xx_net *dev)
 		/* set to internal PHY id */
 		dev->mdiobus->phy_mask = ~(1 << 1);
 		break;
+	case ID_REV_CHIP_ID_7801_:
+		/* scan thru PHYAD[2..0] */
+		dev->mdiobus->phy_mask = ~(0xFF);
+		break;
 	}
 
 	ret = mdiobus_register(dev->mdiobus);
@@ -1933,6 +1944,47 @@ static void lan78xx_remove_irq_domain(struct lan78xx_net *dev)
 	dev->domain_data.irqdomain = NULL;
 }
 
+static int lan8835_fixup(struct phy_device *phydev)
+{
+	int buf;
+	int ret;
+	struct lan78xx_net *dev = netdev_priv(phydev->attached_dev);
+
+	/* LED2/PME_N/IRQ_N/RGMII_ID pin to IRQ_N mode */
+	buf = phy_read_mmd_indirect(phydev, 0x8010, 3);
+	buf &= ~0x1800;
+	buf |= 0x0800;
+	phy_write_mmd_indirect(phydev, 0x8010, 3, buf);
+
+	/* RGMII MAC TXC Delay Enable */
+	ret = lan78xx_write_reg(dev, MAC_RGMII_ID,
+				MAC_RGMII_ID_TXC_DELAY_EN_);
+
+	/* RGMII TX DLL Tune Adjust */
+	ret = lan78xx_write_reg(dev, RGMII_TX_BYP_DLL, 0x3D00);
+
+	dev->interface = PHY_INTERFACE_MODE_RGMII_TXID;
+
+	return 1;
+}
+
+static int ksz9031rnx_fixup(struct phy_device *phydev)
+{
+	struct lan78xx_net *dev = netdev_priv(phydev->attached_dev);
+
+	/* Micrel9301RNX PHY configuration */
+	/* RGMII Control Signal Pad Skew */
+	phy_write_mmd_indirect(phydev, 4, 2, 0x0077);
+	/* RGMII RX Data Pad Skew */
+	phy_write_mmd_indirect(phydev, 5, 2, 0x7777);
+	/* RGMII RX Clock Pad Skew */
+	phy_write_mmd_indirect(phydev, 8, 2, 0x1FF);
+
+	dev->interface = PHY_INTERFACE_MODE_RGMII_RXID;
+
+	return 1;
+}
+
 static int lan78xx_phy_init(struct lan78xx_net *dev)
 {
 	int ret;
@@ -1945,6 +1997,42 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 		return -EIO;
 	}
 
+	if ((dev->chipid == ID_REV_CHIP_ID_7800_) ||
+	    (dev->chipid == ID_REV_CHIP_ID_7850_)) {
+		phydev->is_internal = true;
+		dev->interface = PHY_INTERFACE_MODE_GMII;
+
+	} else if (dev->chipid == ID_REV_CHIP_ID_7801_) {
+		if (!phydev->drv) {
+			netdev_err(dev->net, "no PHY driver found\n");
+			return -EIO;
+		}
+
+		dev->interface = PHY_INTERFACE_MODE_RGMII;
+
+		/* external PHY fixup for KSZ9031RNX */
+		ret = phy_register_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0,
+						 ksz9031rnx_fixup);
+		if (ret < 0) {
+			netdev_err(dev->net, "fail to register fixup\n");
+			return ret;
+		}
+		/* external PHY fixup for LAN8835 */
+		ret = phy_register_fixup_for_uid(PHY_LAN8835, 0xfffffff0,
+						 lan8835_fixup);
+		if (ret < 0) {
+			netdev_err(dev->net, "fail to register fixup\n");
+			return ret;
+		}
+		/* add more external PHY fixup here if needed */
+
+		phydev->is_internal = false;
+	} else {
+		netdev_err(dev->net, "unknown ID found\n");
+		ret = -EIO;
+		goto error;
+	}
+
 	/* if phyirq is not set, use polling mode in phylib */
 	if (dev->domain_data.phyirq > 0)
 		phydev->irq = dev->domain_data.phyirq;
@@ -1957,7 +2045,7 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 
 	ret = phy_connect_direct(dev->net, phydev,
 				 lan78xx_link_status_change,
-				 PHY_INTERFACE_MODE_GMII);
+				 dev->interface);
 	if (ret) {
 		netdev_err(dev->net, "can't attach PHY to %s\n",
 			   dev->mdiobus->id);
@@ -1982,6 +2070,12 @@ static int lan78xx_phy_init(struct lan78xx_net *dev)
 	netif_dbg(dev, ifup, dev->net, "phy initialised successfully");
 
 	return 0;
+
+error:
+	phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
+	phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
+
+	return ret;
 }
 
 static int lan78xx_set_rx_max_frame_length(struct lan78xx_net *dev, int size)
@@ -2338,6 +2432,9 @@ static int lan78xx_reset(struct lan78xx_net *dev)
 	} while ((buf & PMT_CTL_PHY_RST_) || !(buf & PMT_CTL_READY_));
 
 	ret = lan78xx_read_reg(dev, MAC_CR, &buf);
+	/* LAN7801 only has RGMII mode */
+	if (dev->chipid == ID_REV_CHIP_ID_7801_)
+		buf &= ~MAC_CR_GMII_EN_;
 	buf |= MAC_CR_AUTO_DUPLEX_ | MAC_CR_AUTO_SPEED_;
 	ret = lan78xx_write_reg(dev, MAC_CR, buf);
 
@@ -2464,8 +2561,12 @@ static int lan78xx_stop(struct net_device *net)
 	if (timer_pending(&dev->stat_monitor))
 		del_timer_sync(&dev->stat_monitor);
 
+	phy_unregister_fixup_for_uid(PHY_KSZ9031RNX, 0xfffffff0);
+	phy_unregister_fixup_for_uid(PHY_LAN8835, 0xfffffff0);
+
 	phy_stop(net->phydev);
 	phy_disconnect(net->phydev);
+
 	net->phydev = NULL;
 
 	clear_bit(EVENT_DEV_OPEN, &dev->flags);
@@ -3888,6 +3989,10 @@ static const struct usb_device_id products[] = {
 	/* LAN7850 USB Gigabit Ethernet Device */
 	USB_DEVICE(LAN78XX_USB_VENDOR_ID, LAN7850_USB_PRODUCT_ID),
 	},
+	{
+	/* LAN7801 USB Gigabit Ethernet Device */
+	USB_DEVICE(LAN78XX_USB_VENDOR_ID, LAN7801_USB_PRODUCT_ID),
+	},
 	{},
 };
 MODULE_DEVICE_TABLE(usb, products);

drivers/net/usb/lan78xx.h

@@ -108,6 +108,7 @@
 #define ID_REV_CHIP_REV_MASK_		(0x0000FFFF)
 #define ID_REV_CHIP_ID_7800_		(0x7800)
 #define ID_REV_CHIP_ID_7850_		(0x7850)
+#define ID_REV_CHIP_ID_7801_		(0x7801)
 
 #define FPGA_REV			(0x04)
 #define FPGA_REV_MINOR_MASK_		(0x0000FF00)
@@ -550,6 +551,7 @@
 #define LTM_INACTIVE1_TIMER10_		(0x0000FFFF)
 
 #define MAC_CR				(0x100)
+#define MAC_CR_GMII_EN_			(0x00080000)
 #define MAC_CR_EEE_TX_CLK_STOP_EN_	(0x00040000)
 #define MAC_CR_EEE_EN_			(0x00020000)
 #define MAC_CR_EEE_TLAR_EN_		(0x00010000)
@@ -787,6 +789,18 @@
 #define PHY_DEV_ID_MODEL_MASK_		(0x0FC00000)
 #define PHY_DEV_ID_OUI_MASK_		(0x003FFFFF)
 
+#define RGMII_TX_BYP_DLL		(0x708)
+#define RGMII_TX_BYP_DLL_TX_TUNE_ADJ_MASK_	(0x000FC00)
+#define RGMII_TX_BYP_DLL_TX_TUNE_SEL_MASK_	(0x00003F0)
+#define RGMII_TX_BYP_DLL_TX_DLL_RESET_		(0x0000002)
+#define RGMII_TX_BYP_DLL_TX_DLL_BYPASS_		(0x0000001)
+
+#define RGMII_RX_BYP_DLL		(0x70C)
+#define RGMII_RX_BYP_DLL_RX_TUNE_ADJ_MASK_	(0x000FC00)
+#define RGMII_RX_BYP_DLL_RX_TUNE_SEL_MASK_	(0x00003F0)
+#define RGMII_RX_BYP_DLL_RX_DLL_RESET_		(0x0000002)
+#define RGMII_RX_BYP_DLL_RX_DLL_BYPASS_		(0x0000001)
+
 #define OTP_BASE_ADDR			(0x00001000)
 #define OTP_ADDR_RANGE_			(0x1FF)
 

include/linux/phy.h

@@ -860,6 +860,10 @@ int phy_register_fixup_for_id(const char *bus_id,
 int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
 			       int (*run)(struct phy_device *));
 
+int phy_unregister_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask);
+int phy_unregister_fixup_for_id(const char *bus_id);
+int phy_unregister_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask);
+
 int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
 int phy_get_eee_err(struct phy_device *phydev);
 int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);