Merge tag 'clk-mvebu-3.18' of git://git.infradead.org/linux-mvebu into clk-next

clock changes for mvebu for v3.18

 - correct timer drift caused by SSCG deviation
 - fix typo in comment

drivers/clk/mvebu/armada-370.c

@@ -23,6 +23,7 @@
  */
 
 #define SARL				0	/* Low part [0:31] */
+#define	 SARL_A370_SSCG_ENABLE		BIT(10)
 #define	 SARL_A370_PCLK_FREQ_OPT	11
 #define	 SARL_A370_PCLK_FREQ_OPT_MASK	0xF
 #define	 SARL_A370_FAB_FREQ_OPT		15
@@ -133,10 +134,17 @@ static void __init a370_get_clk_ratio(
 	}
 }
 
+static bool a370_is_sscg_enabled(void __iomem *sar)
+{
+	return !(readl(sar) & SARL_A370_SSCG_ENABLE);
+}
+
 static const struct coreclk_soc_desc a370_coreclks = {
 	.get_tclk_freq = a370_get_tclk_freq,
 	.get_cpu_freq = a370_get_cpu_freq,
 	.get_clk_ratio = a370_get_clk_ratio,
+	.is_sscg_enabled = a370_is_sscg_enabled,
+	.fix_sscg_deviation = kirkwood_fix_sscg_deviation,
 	.ratios = a370_coreclk_ratios,
 	.num_ratios = ARRAY_SIZE(a370_coreclk_ratios),
 };

drivers/clk/mvebu/armada-375.c

@@ -27,14 +27,14 @@
  * all modified at the same time, and not separately as for the Armada
  * 370 or the Armada XP SoCs.
  *
- * SAR0[21:17]   : CPU frequency    DDR frequency   L2 frequency
+ * SAR1[21:17]   : CPU frequency    DDR frequency   L2 frequency
  *		 6   =  400 MHz	    400 MHz	    200 MHz
  *		 15  =  600 MHz	    600 MHz	    300 MHz
  *		 21  =  800 MHz	    534 MHz	    400 MHz
  *		 25  = 1000 MHz	    500 MHz	    500 MHz
  *		 others reserved.
  *
- * SAR0[22]   : TCLK frequency
+ * SAR1[22]   : TCLK frequency
  *		 0 = 166 MHz
  *		 1 = 200 MHz
  */

drivers/clk/mvebu/common.c

@@ -26,8 +26,85 @@
  * Core Clocks
  */
 
+#define SSCG_CONF_MODE(reg)	(((reg) >> 16) & 0x3)
+#define SSCG_SPREAD_DOWN	0x0
+#define SSCG_SPREAD_UP		0x1
+#define SSCG_SPREAD_CENTRAL	0x2
+#define SSCG_CONF_LOW(reg)	(((reg) >> 8) & 0xFF)
+#define SSCG_CONF_HIGH(reg)	((reg) & 0xFF)
+
 static struct clk_onecell_data clk_data;
 
+/*
+ * This function can be used by the Kirkwood, the Armada 370, the
+ * Armada XP and the Armada 375 SoC. The name of the function was
+ * chosen following the dt convention: using the first known SoC
+ * compatible with it.
+ */
+u32 kirkwood_fix_sscg_deviation(struct device_node *np, u32 system_clk)
+{
+	struct device_node *sscg_np = NULL;
+	void __iomem *sscg_map;
+	u32 sscg_reg;
+	s32 low_bound, high_bound;
+	u64 freq_swing_half;
+
+	sscg_np = of_find_node_by_name(np, "sscg");
+	if (sscg_np == NULL) {
+		pr_err("cannot get SSCG register node\n");
+		return system_clk;
+	}
+
+	sscg_map = of_iomap(sscg_np, 0);
+	if (sscg_map == NULL) {
+		pr_err("cannot map SSCG register\n");
+		goto out;
+	}
+
+	sscg_reg = readl(sscg_map);
+	high_bound = SSCG_CONF_HIGH(sscg_reg);
+	low_bound = SSCG_CONF_LOW(sscg_reg);
+
+	if ((high_bound - low_bound) <= 0)
+		goto out;
+	/*
+	 * From Marvell engineer we got the following formula (when
+	 * this code was written, the datasheet was erroneous)
+	 * Spread percentage = 1/96 * (H - L) / H
+	 * H = SSCG_High_Boundary
+	 * L = SSCG_Low_Boundary
+	 *
+	 * As the deviation is half of spread then it lead to the
+	 * following formula in the code.
+	 *
+	 * To avoid an overflow and not lose any significant digit in
+	 * the same time we have to use a 64 bit integer.
+	 */
+
+	freq_swing_half = (((u64)high_bound - (u64)low_bound)
+			* (u64)system_clk);
+	do_div(freq_swing_half, (2 * 96 * high_bound));
+
+	switch (SSCG_CONF_MODE(sscg_reg)) {
+	case SSCG_SPREAD_DOWN:
+		system_clk -= freq_swing_half;
+		break;
+	case SSCG_SPREAD_UP:
+		system_clk += freq_swing_half;
+		break;
+	case SSCG_SPREAD_CENTRAL:
+	default:
+		break;
+	}
+
+	iounmap(sscg_map);
+
+out:
+	of_node_put(sscg_np);
+
+	return system_clk;
+}
+
 void __init mvebu_coreclk_setup(struct device_node *np,
 				const struct coreclk_soc_desc *desc)
 {
@@ -62,6 +139,11 @@ void __init mvebu_coreclk_setup(struct device_node *np,
 	of_property_read_string_index(np, "clock-output-names", 1,
 				      &cpuclk_name);
 	rate = desc->get_cpu_freq(base);
+
+	if (desc->is_sscg_enabled && desc->fix_sscg_deviation
+		&& desc->is_sscg_enabled(base))
+		rate = desc->fix_sscg_deviation(np, rate);
+
 	clk_data.clks[1] = clk_register_fixed_rate(NULL, cpuclk_name, NULL,
 						   CLK_IS_ROOT, rate);
 	WARN_ON(IS_ERR(clk_data.clks[1]));

drivers/clk/mvebu/common.h

@@ -30,6 +30,8 @@ struct coreclk_soc_desc {
 	u32 (*get_tclk_freq)(void __iomem *sar);
 	u32 (*get_cpu_freq)(void __iomem *sar);
 	void (*get_clk_ratio)(void __iomem *sar, int id, int *mult, int *div);
+	bool (*is_sscg_enabled)(void __iomem *sar);
+	u32 (*fix_sscg_deviation)(struct device_node *np, u32 system_clk);
 	const struct coreclk_ratio *ratios;
 	int num_ratios;
 };
@@ -47,4 +49,9 @@ void __init mvebu_coreclk_setup(struct device_node *np,
 void __init mvebu_clk_gating_setup(struct device_node *np,
 				   const struct clk_gating_soc_desc *desc);
 
+/*
+ * This function is shared among the Kirkwood, Armada 370, Armada XP
+ * and Armada 375 SoC
+ */
+u32 kirkwood_fix_sscg_deviation(struct device_node *np, u32 system_clk);
 #endif