Merge branch 'usb-audio-fix' of git://git.alsa-project.org/alsa-kprivate into for-linus

Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt

@@ -81,7 +81,8 @@ PA31	TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
   setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio.
+  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
+  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
 
 Bits used for CONFIG:
 PULL_UP		(1 << 0): indicate this pin need a pull up.
@@ -126,7 +127,7 @@ pinctrl@fffff400 {
 		pinctrl_dbgu: dbgu-0 {
 			atmel,pins =
 				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
+				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
 		};
 	};
 };

Documentation/filesystems/f2fs.txt

@@ -175,9 +175,9 @@ consists of multiple segments as described below.
                                             align with the zone size <-|
                  |-> align with the segment size
      _________________________________________________________________________
-    |            |            |    Node     |   Segment   |   Segment  |      |
-    | Superblock | Checkpoint |   Address   |    Info.    |   Summary  | Main |
-    |    (SB)    |   (CP)     | Table (NAT) | Table (SIT) | Area (SSA) |      |
+    |            |            |   Segment   |    Node     |   Segment  |      |
+    | Superblock | Checkpoint |    Info.    |   Address   |   Summary  | Main |
+    |    (SB)    |   (CP)     | Table (SIT) | Table (NAT) | Area (SSA) |      |
     |____________|_____2______|______N______|______N______|______N_____|__N___|
                                                                        .      .
                                                              .                .
@@ -200,14 +200,14 @@ consists of multiple segments as described below.
  : It contains file system information, bitmaps for valid NAT/SIT sets, orphan
    inode lists, and summary entries of current active segments.
 
-- Node Address Table (NAT)
- : It is composed of a block address table for all the node blocks stored in
-   Main area.
-
 - Segment Information Table (SIT)
  : It contains segment information such as valid block count and bitmap for the
    validity of all the blocks.
 
+- Node Address Table (NAT)
+ : It is composed of a block address table for all the node blocks stored in
+   Main area.
+
 - Segment Summary Area (SSA)
  : It contains summary entries which contains the owner information of all the
    data and node blocks stored in Main area.
@@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
 valid, as shown as below.
 
   +--------+----------+---------+
-  |   CP   |    NAT   |   SIT   |
+  |   CP   |    SIT   |   NAT   |
   +--------+----------+---------+
   .         .          .          .
   .            .              .              .
   .               .                 .                 .
   +-------+-------+--------+--------+--------+--------+
-  | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
+  | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
   +-------+-------+--------+--------+--------+--------+
      |             ^                          ^
      |             |                          |

MAINTAINERS

@@ -6585,7 +6585,7 @@ F:	drivers/media/platform/s3c-camif/
 F:	include/media/s3c_camif.h
 
 SERIAL DRIVERS
-M:	Alan Cox <alan@linux.intel.com>
+M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/tty/serial

Makefile

 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*
@@ -169,7 +169,7 @@ SUBARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
 				  -e s/arm.*/arm/ -e s/sa110/arm/ \
 				  -e s/s390x/s390/ -e s/parisc64/parisc/ \
 				  -e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-				  -e s/sh[234].*/sh/ )
+				  -e s/sh[234].*/sh/ -e s/aarch64.*/arm64/ )
 
 # Cross compiling and selecting different set of gcc/bin-utils
 # ---------------------------------------------------------------------------

arch/arm/boot/dts/armada-370-db.dts

@@ -26,7 +26,7 @@
 
 	memory {
 		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
+		reg = <0x00000000 0x40000000>; /* 1 GB */
 	};
 
 	soc {

arch/arm/boot/dts/armada-xp-mv78230.dtsi

@@ -50,27 +50,25 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <17>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>;
+			interrupts = <87>, <88>, <89>;
 		};
 	};
 };

arch/arm/boot/dts/armada-xp-mv78260.dtsi

@@ -51,39 +51,36 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>, <23>;
+			interrupts = <87>, <88>, <89>, <90>;
 		};
 
 		gpio2: gpio@d0018180 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018180 0x40>,
-			    <0xd0018870 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <24>;
+			interrupts = <91>;
 		};
 
 		ethernet@d0034000 {

arch/arm/boot/dts/armada-xp-mv78460.dtsi

@@ -66,39 +66,36 @@
 		};
 
 		gpio0: gpio@d0018100 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018100 0x40>,
-			    <0xd0018800 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018100 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <16>, <17>, <18>, <19>;
+			interrupts = <82>, <83>, <84>, <85>;
 		};
 
 		gpio1: gpio@d0018140 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018140 0x40>,
-			    <0xd0018840 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018140 0x40>;
 			ngpios = <32>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <20>, <21>, <22>, <23>;
+			interrupts = <87>, <88>, <89>, <90>;
 		};
 
 		gpio2: gpio@d0018180 {
-			compatible = "marvell,armadaxp-gpio";
-			reg = <0xd0018180 0x40>,
-			    <0xd0018870 0x30>;
+			compatible = "marvell,orion-gpio";
+			reg = <0xd0018180 0x40>;
 			ngpios = <3>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupts-cells = <2>;
-			interrupts = <24>;
+			interrupts = <91>;
 		};
 
 		ethernet@d0034000 {

arch/arm/boot/dts/at91rm9200.dtsi

@@ -336,8 +336,8 @@
 
 	i2c@0 {
 		compatible = "i2c-gpio";
-		gpios = <&pioA 23 0 /* sda */
-			 &pioA 24 0 /* scl */
+		gpios = <&pioA 25 0 /* sda */
+			 &pioA 26 0 /* scl */
 			>;
 		i2c-gpio,sda-open-drain;
 		i2c-gpio,scl-open-drain;

arch/arm/boot/dts/at91sam9x5.dtsi

@@ -143,6 +143,11 @@
 						atmel,pins =
 							<0 3 0x1 0x0>;	/* PA3 periph A */
 					};
+
+					pinctrl_usart0_sck: usart0_sck-0 {
+						atmel,pins =
+							<0 4 0x1 0x0>;	/* PA4 periph A */
+					};
 				};
 
 				usart1 {
@@ -154,12 +159,17 @@
 
 					pinctrl_usart1_rts: usart1_rts-0 {
 						atmel,pins =
-							<3 27 0x3 0x0>;	/* PC27 periph C */
+							<2 27 0x3 0x0>;	/* PC27 periph C */
 					};
 
 					pinctrl_usart1_cts: usart1_cts-0 {
 						atmel,pins =
-							<3 28 0x3 0x0>;	/* PC28 periph C */
+							<2 28 0x3 0x0>;	/* PC28 periph C */
+					};
+
+					pinctrl_usart1_sck: usart1_sck-0 {
+						atmel,pins =
+							<2 28 0x3 0x0>;	/* PC29 periph C */
 					};
 				};
 
@@ -172,46 +182,56 @@
 
 					pinctrl_uart2_rts: uart2_rts-0 {
 						atmel,pins =
-							<0 0 0x2 0x0>;	/* PB0 periph B */
+							<1 0 0x2 0x0>;	/* PB0 periph B */
 					};
 
 					pinctrl_uart2_cts: uart2_cts-0 {
 						atmel,pins =
-							<0 1 0x2 0x0>;	/* PB1 periph B */
+							<1 1 0x2 0x0>;	/* PB1 periph B */
+					};
+
+					pinctrl_usart2_sck: usart2_sck-0 {
+						atmel,pins =
+							<1 2 0x2 0x0>;	/* PB2 periph B */
 					};
 				};
 
 				usart3 {
 					pinctrl_uart3: usart3-0 {
 						atmel,pins =
-							<3 23 0x2 0x1	/* PC22 periph B with pullup */
-							 3 23 0x2 0x0>;	/* PC23 periph B */
+							<2 23 0x2 0x1	/* PC22 periph B with pullup */
+							 2 23 0x2 0x0>;	/* PC23 periph B */
 					};
 
 					pinctrl_usart3_rts: usart3_rts-0 {
 						atmel,pins =
-							<3 24 0x2 0x0>;	/* PC24 periph B */
+							<2 24 0x2 0x0>;	/* PC24 periph B */
 					};
 
 					pinctrl_usart3_cts: usart3_cts-0 {
 						atmel,pins =
-							<3 25 0x2 0x0>;	/* PC25 periph B */
+							<2 25 0x2 0x0>;	/* PC25 periph B */
+					};
+
+					pinctrl_usart3_sck: usart3_sck-0 {
+						atmel,pins =
+							<2 26 0x2 0x0>;	/* PC26 periph B */
 					};
 				};
 
 				uart0 {
 					pinctrl_uart0: uart0-0 {
 						atmel,pins =
-							<3 8 0x3 0x0	/* PC8 periph C */
-							 3 9 0x3 0x1>;	/* PC9 periph C with pullup */
+							<2 8 0x3 0x0	/* PC8 periph C */
+							 2 9 0x3 0x1>;	/* PC9 periph C with pullup */
 					};
 				};
 
 				uart1 {
 					pinctrl_uart1: uart1-0 {
 						atmel,pins =
-							<3 16 0x3 0x0	/* PC16 periph C */
-							 3 17 0x3 0x1>;	/* PC17 periph C with pullup */
+							<2 16 0x3 0x0	/* PC16 periph C */
+							 2 17 0x3 0x1>;	/* PC17 periph C with pullup */
 					};
 				};
 
@@ -240,14 +260,14 @@
 
 					pinctrl_macb0_rmii_mii: macb0_rmii_mii-0 {
 						atmel,pins =
-							<1 8 0x1 0x0	/* PA8 periph A */
-							 1 11 0x1 0x0	/* PA11 periph A */
-							 1 12 0x1 0x0	/* PA12 periph A */
-							 1 13 0x1 0x0	/* PA13 periph A */
-							 1 14 0x1 0x0	/* PA14 periph A */
-							 1 15 0x1 0x0	/* PA15 periph A */
-							 1 16 0x1 0x0	/* PA16 periph A */
-							 1 17 0x1 0x0>;	/* PA17 periph A */
+							<1 8 0x1 0x0	/* PB8 periph A */
+							 1 11 0x1 0x0	/* PB11 periph A */
+							 1 12 0x1 0x0	/* PB12 periph A */
+							 1 13 0x1 0x0	/* PB13 periph A */
+							 1 14 0x1 0x0	/* PB14 periph A */
+							 1 15 0x1 0x0	/* PB15 periph A */
+							 1 16 0x1 0x0	/* PB16 periph A */
+							 1 17 0x1 0x0>;	/* PB17 periph A */
 					};
 				};
 

arch/arm/boot/dts/cros5250-common.dtsi

@@ -96,8 +96,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
@@ -120,8 +120,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
@@ -141,8 +141,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;

arch/arm/boot/dts/dove-cubox.dts

@@ -26,10 +26,15 @@
 };
 
 &uart0 { status = "okay"; };
-&sdio0 { status = "okay"; };
 &sata0 { status = "okay"; };
 &i2c0 { status = "okay"; };
 
+&sdio0 {
+	status = "okay";
+	/* sdio0 card detect is connected to wrong pin on CuBox */
+	cd-gpios = <&gpio0 12 1>;
+};
+
 &spi0 {
 	status = "okay";
 
@@ -42,9 +47,14 @@
 };
 
 &pinctrl {
-	pinctrl-0 = <&pmx_gpio_18>;
+	pinctrl-0 = <&pmx_gpio_12 &pmx_gpio_18>;
 	pinctrl-names = "default";
 
+	pmx_gpio_12: pmx-gpio-12 {
+		marvell,pins = "mpp12";
+		marvell,function = "gpio";
+	};
+
 	pmx_gpio_18: pmx-gpio-18 {
 		marvell,pins = "mpp18";
 		marvell,function = "gpio";

arch/arm/boot/dts/exynos5250-smdk5250.dts

@@ -115,8 +115,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;
@@ -139,8 +139,8 @@
 		fifo-depth = <0x80>;
 		card-detect-delay = <200>;
 		samsung,dw-mshc-ciu-div = <3>;
-		samsung,dw-mshc-sdr-timing = <2 3 3>;
-		samsung,dw-mshc-ddr-timing = <1 2 3>;
+		samsung,dw-mshc-sdr-timing = <2 3>;
+		samsung,dw-mshc-ddr-timing = <1 2>;
 
 		slot@0 {
 			reg = <0>;

arch/arm/boot/dts/kirkwood-ns2-common.dtsi

 /include/ "kirkwood.dtsi"
+/include/ "kirkwood-6281.dtsi"
 
 / {
 	chosen {
@@ -6,6 +7,21 @@
 	};
 
 	ocp@f1000000 {
+		pinctrl: pinctrl@10000 {
+			pinctrl-0 = < &pmx_spi &pmx_twsi0 &pmx_uart0
+					&pmx_ns2_sata0 &pmx_ns2_sata1>;
+			pinctrl-names = "default";
+
+			pmx_ns2_sata0: pmx-ns2-sata0 {
+				marvell,pins = "mpp21";
+				marvell,function = "sata0";
+			};
+			pmx_ns2_sata1: pmx-ns2-sata1 {
+				marvell,pins = "mpp20";
+				marvell,function = "sata1";
+			};
+		};
+
 		serial@12000 {
 			clock-frequency = <166666667>;
 			status = "okay";

arch/arm/boot/dts/kirkwood.dtsi

@@ -36,6 +36,7 @@
 			reg = <0x10100 0x40>;
 			ngpios = <32>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <35>, <36>, <37>, <38>;
 		};
 
@@ -46,6 +47,7 @@
 			reg = <0x10140 0x40>;
 			ngpios = <18>;
 			interrupt-controller;
+			#interrupt-cells = <2>;
 			interrupts = <39>, <40>, <41>;
 		};
 

arch/arm/boot/dts/kizbox.dts

@@ -48,6 +48,8 @@
 
 			macb0: ethernet@fffc4000 {
 				phy-mode = "mii";
+				pinctrl-0 = <&pinctrl_macb_rmii
+				             &pinctrl_macb_rmii_mii_alt>;
 				status = "okay";
 			};
 

arch/arm/boot/dts/sunxi.dtsi

@@ -60,19 +60,21 @@
 		};
 
 		uart0: uart@01c28000 {
-			compatible = "ns8250";
+			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28000 0x400>;
 			interrupts = <1>;
 			reg-shift = <2>;
+			reg-io-width = <4>;
 			clock-frequency = <24000000>;
 			status = "disabled";
 		};
 
 		uart1: uart@01c28400 {
-			compatible = "ns8250";
+			compatible = "snps,dw-apb-uart";
 			reg = <0x01c28400 0x400>;
 			interrupts = <2>;
 			reg-shift = <2>;
+			reg-io-width = <4>;
 			clock-frequency = <24000000>;
 			status = "disabled";
 		};

arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts

@@ -45,7 +45,6 @@
 			reg = <1>;
 		};
 
-/* A7s disabled till big.LITTLE patches are available...
 		cpu2: cpu@2 {
 			device_type = "cpu";
 			compatible = "arm,cortex-a7";
@@ -63,7 +62,6 @@
 			compatible = "arm,cortex-a7";
 			reg = <0x102>;
 		};
-*/
 	};
 
 	memory@80000000 {

arch/arm/configs/at91_dt_defconfig

@@ -19,6 +19,7 @@ CONFIG_SOC_AT91SAM9260=y
 CONFIG_SOC_AT91SAM9263=y
 CONFIG_SOC_AT91SAM9G45=y
 CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
 CONFIG_MACH_AT91SAM_DT=y
 CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 CONFIG_AT91_TIMER_HZ=128
@@ -31,7 +32,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_ARM_APPENDED_DTB=y
 CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
 CONFIG_KEXEC=y
 CONFIG_AUTO_ZRELADDR=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set

arch/arm/kernel/debug.S

@@ -100,12 +100,14 @@ ENTRY(printch)
 		b	1b
 ENDPROC(printch)
 
+#ifdef CONFIG_MMU
 ENTRY(debug_ll_addr)
 		addruart r2, r3, ip
 		str	r2, [r0]
 		str	r3, [r1]
 		mov	pc, lr
 ENDPROC(debug_ll_addr)
+#endif
 
 #else
 

arch/arm/kernel/head.S

@@ -246,6 +246,7 @@ __create_page_tables:
 
 	/*
 	 * Then map boot params address in r2 if specified.
+	 * We map 2 sections in case the ATAGs/DTB crosses a section boundary.
 	 */
 	mov	r0, r2, lsr #SECTION_SHIFT
 	movs	r0, r0, lsl #SECTION_SHIFT
@@ -253,6 +254,8 @@ __create_page_tables:
 	addne	r3, r3, #PAGE_OFFSET
 	addne	r3, r4, r3, lsr #(SECTION_SHIFT - PMD_ORDER)
 	orrne	r6, r7, r0
+	strne	r6, [r3], #1 << PMD_ORDER
+	addne	r6, r6, #1 << SECTION_SHIFT
 	strne	r6, [r3]
 
 #ifdef CONFIG_DEBUG_LL
@@ -331,7 +334,7 @@ ENTRY(secondary_startup)
 	 * as it has already been validated by the primary processor.
 	 */
 #ifdef CONFIG_ARM_VIRT_EXT
-	bl	__hyp_stub_install
+	bl	__hyp_stub_install_secondary
 #endif
 	safe_svcmode_maskall r9
 

arch/arm/kernel/hyp-stub.S

@@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary)
 	 * immediately.
 	 */
 	compare_cpu_mode_with_primary	r4, r5, r6, r7
-	bxne	lr
+	movne	pc, lr
 
 	/*
 	 * Once we have given up on one CPU, we do not try to install the
@@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary)
 	 */
 
 	cmp	r4, #HYP_MODE
-	bxne	lr			@ give up if the CPU is not in HYP mode
+	movne	pc, lr			@ give up if the CPU is not in HYP mode
 
 /*
  * Configure HSCTLR to set correct exception endianness/instruction set
@@ -120,7 +120,8 @@ ENTRY(__hyp_stub_install_secondary)
  * Eventually, CPU-specific code might be needed -- assume not for now
  *
  * This code relies on the "eret" instruction to synchronize the
- * various coprocessor accesses.
+ * various coprocessor accesses. This is done when we switch to SVC
+ * (see safe_svcmode_maskall).
  */
 	@ Now install the hypervisor stub:
 	adr	r7, __hyp_stub_vectors
@@ -155,14 +156,7 @@ THUMB(	orr	r7, #(1 << 30)	)	@ HSCTLR.TE
 1:
 #endif
 
-	bic	r7, r4, #MODE_MASK
-	orr	r7, r7, #SVC_MODE
-THUMB(	orr	r7, r7, #PSR_T_BIT	)
-	msr	spsr_cxsf, r7		@ This is SPSR_hyp.
-
-	__MSR_ELR_HYP(14)		@ msr elr_hyp, lr
-	__ERET				@ return, switching to SVC mode
-					@ The boot CPU mode is left in r4.
+	bx	lr			@ The boot CPU mode is left in r4.
 ENDPROC(__hyp_stub_install_secondary)
 
 __hyp_stub_do_trap:
@@ -200,7 +194,7 @@ ENDPROC(__hyp_get_vectors)
 	@ fall through
 ENTRY(__hyp_set_vectors)
 	__HVC(0)
-	bx	lr
+	mov	pc, lr
 ENDPROC(__hyp_set_vectors)
 
 #ifndef ZIMAGE

arch/arm/mach-at91/setup.c

@@ -105,6 +105,8 @@ static void __init soc_detect(u32 dbgu_base)
 	switch (socid) {
 	case ARCH_ID_AT91RM9200:
 		at91_soc_initdata.type = AT91_SOC_RM9200;
+		if (at91_soc_initdata.subtype == AT91_SOC_SUBTYPE_NONE)
+			at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
 		at91_boot_soc = at91rm9200_soc;
 		break;
 

arch/arm/mach-imx/Kconfig

@@ -851,6 +851,7 @@ config SOC_IMX6Q
 	select HAVE_CAN_FLEXCAN if CAN
 	select HAVE_IMX_GPC
 	select HAVE_IMX_MMDC
+	select HAVE_IMX_SRC
 	select HAVE_SMP
 	select MFD_SYSCON
 	select PINCTRL

arch/arm/mach-imx/clk-imx25.c

@@ -254,9 +254,9 @@ int __init mx25_clocks_init(void)
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_ahb], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_ahb], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_ahb], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
 	clk_register_clkdev(clk[nfc_ipg_per], NULL, "imx25-nand.0");
 	/* i.mx25 has the i.mx35 type cspi */
 	clk_register_clkdev(clk[cspi1_ipg], NULL, "imx35-cspi.0");

arch/arm/mach-imx/clk-imx27.c

@@ -236,9 +236,9 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[lcdc_ahb_gate], "ahb", "imx21-fb.0");
 	clk_register_clkdev(clk[csi_ahb_gate], "ahb", "imx27-camera.0");
 	clk_register_clkdev(clk[per4_gate], "per", "imx27-camera.0");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "imx-udc-mx27");
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ipg_gate], "ipg", "mxc-ehci.0");
 	clk_register_clkdev(clk[usb_ahb_gate], "ahb", "mxc-ehci.0");

arch/arm/mach-imx/clk-imx31.c

@@ -139,9 +139,9 @@ int __init mx31_clocks_init(unsigned long fref)
 	clk_register_clkdev(clk[usb_div_post], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usb_gate], "ahb", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div_post], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usb_gate], "ahb", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div_post], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[usb_gate], "ahb", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");
 	/* i.mx31 has the i.mx21 type uart */
 	clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0");

arch/arm/mach-imx/clk-imx35.c

@@ -251,9 +251,9 @@ int __init mx35_clocks_init()
 	clk_register_clkdev(clk[usb_div], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[ipg], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usbotg_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usb_div], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[ipg], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usb_div], "per", "imx-udc-mx27");
+	clk_register_clkdev(clk[ipg], "ipg", "imx-udc-mx27");
+	clk_register_clkdev(clk[usbotg_gate], "ahb", "imx-udc-mx27");
 	clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0");
 	clk_register_clkdev(clk[nfc_div], NULL, "imx25-nand.0");
 	clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0");

arch/arm/mach-imx/clk-imx51-imx53.c

@@ -269,9 +269,9 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil,
 	clk_register_clkdev(clk[usboh3_per_gate], "per", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ipg", "mxc-ehci.2");
 	clk_register_clkdev(clk[usboh3_gate], "ahb", "mxc-ehci.2");
-	clk_register_clkdev(clk[usboh3_per_gate], "per", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ipg", "fsl-usb2-udc");
-	clk_register_clkdev(clk[usboh3_gate], "ahb", "fsl-usb2-udc");
+	clk_register_clkdev(clk[usboh3_per_gate], "per", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ipg", "imx-udc-mx51");
+	clk_register_clkdev(clk[usboh3_gate], "ahb", "imx-udc-mx51");
 	clk_register_clkdev(clk[nfc_gate], NULL, "imx51-nand");
 	clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0");
 	clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1");

arch/arm/mach-imx/clk-imx6q.c

@@ -436,6 +436,9 @@ int __init mx6q_clocks_init(void)
 	for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
 		clk_prepare_enable(clk[clks_init_on[i]]);
 
+	/* Set initial power mode */
+	imx6q_set_lpm(WAIT_CLOCKED);
+
 	np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
 	base = of_iomap(np, 0);
 	WARN_ON(!base);

arch/arm/mach-imx/common.h

@@ -142,6 +142,7 @@ extern int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
 extern void imx6q_clock_map_io(void);
 
 extern void imx_cpu_die(unsigned int cpu);
+extern int imx_cpu_kill(unsigned int cpu);
 
 #ifdef CONFIG_PM
 extern void imx6q_pm_init(void);

arch/arm/mach-imx/devices/devices-common.h

@@ -63,6 +63,7 @@ struct platform_device *__init imx_add_flexcan(
 
 #include <linux/fsl_devices.h>
 struct imx_fsl_usb2_udc_data {
+	const char *devid;
 	resource_size_t iobase;
 	resource_size_t irq;
 };

arch/arm/mach-imx/devices/platform-fsl-usb2-udc.c

@@ -11,35 +11,36 @@
 #include "../hardware.h"
 #include "devices-common.h"
 
-#define imx_fsl_usb2_udc_data_entry_single(soc)				\
+#define imx_fsl_usb2_udc_data_entry_single(soc, _devid)			\
 	{								\
+		.devid = _devid,					\
 		.iobase = soc ## _USB_OTG_BASE_ADDR,			\
 		.irq = soc ## _INT_USB_OTG,				\
 	}
 
 #ifdef CONFIG_SOC_IMX25
 const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX25);
+	imx_fsl_usb2_udc_data_entry_single(MX25, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX25 */
 
 #ifdef CONFIG_SOC_IMX27
 const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX27);
+	imx_fsl_usb2_udc_data_entry_single(MX27, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX27 */
 
 #ifdef CONFIG_SOC_IMX31
 const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX31);
+	imx_fsl_usb2_udc_data_entry_single(MX31, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX31 */
 
 #ifdef CONFIG_SOC_IMX35
 const struct imx_fsl_usb2_udc_data imx35_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX35);
+	imx_fsl_usb2_udc_data_entry_single(MX35, "imx-udc-mx27");
 #endif /* ifdef CONFIG_SOC_IMX35 */
 
 #ifdef CONFIG_SOC_IMX51
 const struct imx_fsl_usb2_udc_data imx51_fsl_usb2_udc_data __initconst =
-	imx_fsl_usb2_udc_data_entry_single(MX51);
+	imx_fsl_usb2_udc_data_entry_single(MX51, "imx-udc-mx51");
 #endif
 
 struct platform_device *__init imx_add_fsl_usb2_udc(
@@ -57,7 +58,7 @@ struct platform_device *__init imx_add_fsl_usb2_udc(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("fsl-usb2-udc", -1,
+	return imx_add_platform_device_dmamask(data->devid, -1,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }

arch/arm/mach-imx/devices/platform-imx-fb.c

@@ -54,7 +54,7 @@ struct platform_device *__init imx_add_imx_fb(
 			.flags = IORESOURCE_IRQ,
 		},
 	};
-	return imx_add_platform_device_dmamask("imx-fb", 0,
+	return imx_add_platform_device_dmamask(data->devid, 0,
 			res, ARRAY_SIZE(res),
 			pdata, sizeof(*pdata), DMA_BIT_MASK(32));
 }

arch/arm/mach-imx/hotplug.c

@@ -46,9 +46,11 @@ static inline void cpu_enter_lowpower(void)
 void imx_cpu_die(unsigned int cpu)
 {
 	cpu_enter_lowpower();
-	imx_enable_cpu(cpu, false);
+	cpu_do_idle();
+}
 
-	/* spin here until hardware takes it down */
-	while (1)
-		;
+int imx_cpu_kill(unsigned int cpu)
+{
+	imx_enable_cpu(cpu, false);
+	return 1;
 }

arch/arm/mach-imx/iram_alloc.c

@@ -22,8 +22,7 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 #include <linux/genalloc.h>
-
-#include "iram.h"
+#include "linux/platform_data/imx-iram.h"
 
 static unsigned long iram_phys_base;
 static void __iomem *iram_virt_base;

arch/arm/mach-imx/platsmp.c

@@ -92,5 +92,6 @@ struct smp_operations  imx_smp_ops __initdata = {
 	.smp_boot_secondary	= imx_boot_secondary,
 #ifdef CONFIG_HOTPLUG_CPU
 	.cpu_die		= imx_cpu_die,
+	.cpu_kill		= imx_cpu_kill,
 #endif
 };

arch/arm/mach-imx/pm-imx6q.c

@@ -41,6 +41,7 @@ static int imx6q_pm_enter(suspend_state_t state)
 		cpu_suspend(0, imx6q_suspend_finish);
 		imx_smp_prepare();
 		imx_gpc_post_resume();
+		imx6q_set_lpm(WAIT_CLOCKED);
 		break;
 	default:
 		return -EINVAL;

arch/arm/mach-integrator/pci_v3.c

@@ -475,13 +475,12 @@ int __init pci_v3_setup(int nr, struct pci_sys_data *sys)
 {
 	int ret = 0;
 
+	if (!ap_syscon_base)
+		return -EINVAL;
+
 	if (nr == 0) {
 		sys->mem_offset = PHYS_PCI_MEM_BASE;
 		ret = pci_v3_setup_resources(sys);
-		/* Remap the Integrator system controller */
-		ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
-		if (!ap_syscon_base)
-			return -EINVAL;
 	}
 
 	return ret;
@@ -497,6 +496,13 @@ void __init pci_v3_preinit(void)
 	unsigned int temp;
 	int ret;
 
+	/* Remap the Integrator system controller */
+	ap_syscon_base = ioremap(INTEGRATOR_SC_BASE, 0x100);
+	if (!ap_syscon_base) {
+		pr_err("unable to remap the AP syscon for PCIv3\n");
+		return;
+	}
+
 	pcibios_min_mem = 0x00100000;
 
 	/*

arch/arm/mach-kirkwood/board-ns2.c

@@ -18,47 +18,11 @@
 #include <linux/gpio.h>
 #include <linux/of.h>
 #include "common.h"
-#include "mpp.h"
 
 static struct mv643xx_eth_platform_data ns2_ge00_data = {
 	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
 };
 
-static unsigned int ns2_mpp_config[] __initdata = {
-	MPP0_SPI_SCn,
-	MPP1_SPI_MOSI,
-	MPP2_SPI_SCK,
-	MPP3_SPI_MISO,
-	MPP4_NF_IO6,
-	MPP5_NF_IO7,
-	MPP6_SYSRST_OUTn,
-	MPP7_GPO,		/* Fan speed (bit 1) */
-	MPP8_TW0_SDA,
-	MPP9_TW0_SCK,
-	MPP10_UART0_TXD,
-	MPP11_UART0_RXD,
-	MPP12_GPO,		/* Red led */
-	MPP14_GPIO,		/* USB fuse */
-	MPP16_GPIO,		/* SATA 0 power */
-	MPP17_GPIO,		/* SATA 1 power */
-	MPP18_NF_IO0,
-	MPP19_NF_IO1,
-	MPP20_SATA1_ACTn,
-	MPP21_SATA0_ACTn,
-	MPP22_GPIO,		/* Fan speed (bit 0) */
-	MPP23_GPIO,		/* Fan power */
-	MPP24_GPIO,		/* USB mode select */
-	MPP25_GPIO,		/* Fan rotation fail */
-	MPP26_GPIO,		/* USB device vbus */
-	MPP28_GPIO,		/* USB enable host vbus */
-	MPP29_GPIO,		/* Blue led (slow register) */
-	MPP30_GPIO,		/* Blue led (command register) */
-	MPP31_GPIO,		/* Board power off */
-	MPP32_GPIO,		/* Power button (0 = Released, 1 = Pushed) */
-	MPP33_GPO,		/* Fan speed (bit 2) */
-	0
-};
-
 #define NS2_GPIO_POWER_OFF	31
 
 static void ns2_power_off(void)
@@ -71,8 +35,6 @@ void __init ns2_init(void)
 	/*
 	 * Basic setup. Needs to be called early.
 	 */
-	kirkwood_mpp_conf(ns2_mpp_config);
-
 	if (of_machine_is_compatible("lacie,netspace_lite_v2") ||
 	    of_machine_is_compatible("lacie,netspace_mini_v2"))
 		ns2_ge00_data.phy_addr = MV643XX_ETH_PHY_ADDR(0);

arch/arm/mach-mvebu/Makefile

 ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
 	-I$(srctree)/arch/arm/plat-orion/include
 
+AFLAGS_coherency_ll.o		:= -Wa,-march=armv7-a
+
 obj-y += system-controller.o
 obj-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-xp.o irq-armada-370-xp.o addr-map.o coherency.o coherency_ll.o pmsu.o
 obj-$(CONFIG_SMP)                += platsmp.o headsmp.o

arch/arm/mach-omap2/board-omap4panda.c

@@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = {
 		  OMAP_PULL_ENA),
 	OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
 
+	/* UART2 - BT/FM/GPS shared transport */
+	OMAP4_MUX(UART2_CTS,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RTS,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_RX,	OMAP_PIN_INPUT	| OMAP_MUX_MODE0),
+	OMAP4_MUX(UART2_TX,	OMAP_PIN_OUTPUT	| OMAP_MUX_MODE0),
+
 	{ .reg_offset = OMAP_MUX_TERMINATOR },
 };
 

arch/arm/mach-omap2/cclock2420_data.c

@@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();
 
 	omap2_clk_enable_init_clocks(enable_init_clks,

arch/arm/mach-omap2/cclock2430_data.c

@@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void)
 			omap2_init_clk_hw_omap_clocks(c->lk.clk);
 	}
 
+	omap2xxx_clkt_vps_late_init();
+
 	omap2_clk_disable_autoidle_all();
 
 	omap2_clk_enable_init_clocks(enable_init_clks,

arch/arm/mach-omap2/cclock44xx_data.c

@@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void)
 	 * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power
 	 * state when turning the ABE clock domain. Workaround this by
 	 * locking the ABE DPLL on boot.
+	 * Lock the ABE DPLL in any case to avoid issues with audio.
 	 */
-	if (cpu_is_omap446x()) {
-		rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
-		if (!rc)
-			rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
-		if (rc)
-			pr_err("%s: failed to configure ABE DPLL!\n", __func__);
-	}
+	rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck);
+	if (!rc)
+		rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ);
+	if (rc)
+		pr_err("%s: failed to configure ABE DPLL!\n", __func__);
 
 	return 0;
 }

arch/arm/mach-omap2/devices.c

@@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev)
 	return cnt;
 }
 
-static void omap_init_ocp2scp(void)
+static void __init omap_init_ocp2scp(void)
 {
 	struct omap_hwmod	*oh;
 	struct platform_device	*pdev;

arch/arm/mach-omap2/drm.c

@@ -25,6 +25,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/platform_data/omap_drm.h>
 
+#include "soc.h"
 #include "omap_device.h"
 #include "omap_hwmod.h"
 
@@ -56,7 +57,7 @@ static int __init omap_init_drm(void)
 			oh->name);
 	}
 
-	platform_data.omaprev = GET_OMAP_REVISION();
+	platform_data.omaprev = GET_OMAP_TYPE;
 
 	return platform_device_register(&omap_drm_device);
 

arch/arm/mach-omap2/omap_hwmod_44xx_data.c

@@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = {
 	 * currently reset very early during boot, before I2C is
 	 * available, so it doesn't seem that we have any choice in
 	 * the kernel other than to avoid resetting it.
+	 *
+	 * Also, McPDM needs to be configured to NO_IDLE mode when it
+	 * is in used otherwise vital clocks will be gated which
+	 * results 'slow motion' audio playback.
 	 */
-	.flags		= HWMOD_EXT_OPT_MAIN_CLK,
+	.flags		= HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
 	.mpu_irqs	= omap44xx_mcpdm_irqs,
 	.sdma_reqs	= omap44xx_mcpdm_sdma_reqs,
 	.main_clk	= "mcpdm_fck",

arch/arm/mach-omap2/timer.c

@@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match,
 	struct device_node *np;
 
 	for_each_matching_node(np, match) {
-		if (!of_device_is_available(np)) {
-			of_node_put(np);
+		if (!of_device_is_available(np))
 			continue;
-		}
 
-		if (property && !of_get_property(np, property, NULL)) {
-			of_node_put(np);
+		if (property && !of_get_property(np, property, NULL))
 			continue;
-		}
 
 		of_add_property(np, &device_disabled);
 		return np;

arch/arm/mach-s3c64xx/mach-crag6410-module.c

@@ -47,7 +47,7 @@ static struct spi_board_info wm1253_devs[] = {
 		.bus_num	= 0,
 		.chip_select	= 0,
 		.mode		= SPI_MODE_0,
-		.irq		= S3C_EINT(5),
+		.irq		= S3C_EINT(4),
 		.controller_data = &wm0010_spi_csinfo,
 		.platform_data = &wm0010_pdata,
 	},

arch/arm/mach-s3c64xx/pm.c

@@ -338,8 +338,10 @@ int __init s3c64xx_pm_init(void)
 	for (i = 0; i < ARRAY_SIZE(s3c64xx_pm_domains); i++)
 		pm_genpd_init(&s3c64xx_pm_domains[i]->pd, NULL, false);
 
+#ifdef CONFIG_S3C_DEV_FB
 	if (dev_get_platdata(&s3c_device_fb.dev))
 		pm_genpd_add_device(&s3c64xx_pm_f.pd, &s3c_device_fb.dev);
+#endif
 
 	return 0;
 }

arch/arm/mm/dma-mapping.c

@@ -774,25 +774,27 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 	size_t size, enum dma_data_direction dir,
 	void (*op)(const void *, size_t, int))
 {
+	unsigned long pfn;
+	size_t left = size;
+
+	pfn = page_to_pfn(page) + offset / PAGE_SIZE;
+	offset %= PAGE_SIZE;
+
 	/*
 	 * A single sg entry may refer to multiple physically contiguous
 	 * pages.  But we still need to process highmem pages individually.
 	 * If highmem is not configured then the bulk of this loop gets
 	 * optimized out.
 	 */
-	size_t left = size;
 	do {
 		size_t len = left;
 		void *vaddr;
 
+		page = pfn_to_page(pfn);
+
 		if (PageHighMem(page)) {
-			if (len + offset > PAGE_SIZE) {
-				if (offset >= PAGE_SIZE) {
-					page += offset / PAGE_SIZE;
-					offset %= PAGE_SIZE;
-				}
+			if (len + offset > PAGE_SIZE)
 				len = PAGE_SIZE - offset;
-			}
 			vaddr = kmap_high_get(page);
 			if (vaddr) {
 				vaddr += offset;
@@ -809,7 +811,7 @@ static void dma_cache_maint_page(struct page *page, unsigned long offset,
 			op(vaddr, len, dir);
 		}
 		offset = 0;
-		page++;
+		pfn++;
 		left -= len;
 	} while (left);
 }

arch/arm/mm/mmu.c

@@ -283,7 +283,7 @@ static struct mem_type mem_types[] = {
 	},
 	[MT_MEMORY_SO] = {
 		.prot_pte  = L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_DIRTY |
-				L_PTE_MT_UNCACHED,
+				L_PTE_MT_UNCACHED | L_PTE_XN,
 		.prot_l1   = PMD_TYPE_TABLE,
 		.prot_sect = PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_S |
 				PMD_SECT_UNCACHED | PMD_SECT_XN,

arch/arm/plat-versatile/headsmp.S

@@ -20,7 +20,7 @@
  */
 ENTRY(versatile_secondary_startup)
 	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #15
+	bic	r0, #0xff000000
 	adr	r4, 1f
 	ldmia	r4, {r5, r6}
 	sub	r4, r4, r5

arch/arm/vfp/entry.S

@@ -22,7 +22,7 @@
 @  IRQs disabled.
 @
 ENTRY(do_vfp)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	add	r11, r4, #1		@ increment it
 	str	r11, [r10, #TI_PREEMPT]
@@ -35,7 +35,7 @@ ENTRY(do_vfp)
 ENDPROC(do_vfp)
 
 ENTRY(vfp_null_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@@ -53,7 +53,7 @@ ENDPROC(vfp_null_entry)
 
 	__INIT
 ENTRY(vfp_testing_entry)
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it

arch/arm/vfp/vfphw.S

@@ -168,7 +168,7 @@ vfp_hw_state_valid:
 					@ else it's one 32-bit instruction, so
 					@ always subtract 4 from the following
 					@ instruction address.
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it
@@ -192,7 +192,7 @@ look_for_VFP_exceptions:
 	@ not recognised by VFP
 
 	DBGSTR	"not VFP"
-#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_PREEMPT_COUNT
 	get_thread_info	r10
 	ldr	r4, [r10, #TI_PREEMPT]	@ get preempt count
 	sub	r11, r4, #1		@ decrement it

arch/arm64/include/asm/elf.h

@@ -26,7 +26,10 @@
 
 typedef unsigned long elf_greg_t;
 
-#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+#define ELF_NGREG (sizeof(struct user_pt_regs) / sizeof(elf_greg_t))
+#define ELF_CORE_COPY_REGS(dest, regs)	\
+	*(struct user_pt_regs *)&(dest) = (regs)->user_regs;
+
 typedef elf_greg_t elf_gregset_t[ELF_NGREG];
 typedef struct user_fpsimd_state elf_fpregset_t;
 

arch/ia64/kernel/ptrace.c

@@ -672,33 +672,6 @@ ptrace_attach_sync_user_rbs (struct task_struct *child)
 	read_unlock(&tasklist_lock);
 }
 
-static inline int
-thread_matches (struct task_struct *thread, unsigned long addr)
-{
-	unsigned long thread_rbs_end;
-	struct pt_regs *thread_regs;
-
-	if (ptrace_check_attach(thread, 0) < 0)
-		/*
-		 * If the thread is not in an attachable state, we'll
-		 * ignore it.  The net effect is that if ADDR happens
-		 * to overlap with the portion of the thread's
-		 * register backing store that is currently residing
-		 * on the thread's kernel stack, then ptrace() may end
-		 * up accessing a stale value.  But if the thread
-		 * isn't stopped, that's a problem anyhow, so we're
-		 * doing as well as we can...
-		 */
-		return 0;
-
-	thread_regs = task_pt_regs(thread);
-	thread_rbs_end = ia64_get_user_rbs_end(thread, thread_regs, NULL);
-	if (!on_kernel_rbs(addr, thread_regs->ar_bspstore, thread_rbs_end))
-		return 0;
-
-	return 1;	/* looks like we've got a winner */
-}
-
 /*
  * Write f32-f127 back to task->thread.fph if it has been modified.
  */

arch/m68k/include/asm/dma-mapping.h

@@ -21,6 +21,22 @@ extern void *dma_alloc_coherent(struct device *, size_t,
 extern void dma_free_coherent(struct device *, size_t,
 			      void *, dma_addr_t);
 
+static inline void *dma_alloc_attrs(struct device *dev, size_t size,
+				    dma_addr_t *dma_handle, gfp_t flag,
+				    struct dma_attrs *attrs)
+{
+	/* attrs is not supported and ignored */
+	return dma_alloc_coherent(dev, size, dma_handle, flag);
+}
+
+static inline void dma_free_attrs(struct device *dev, size_t size,
+				  void *cpu_addr, dma_addr_t dma_handle,
+				  struct dma_attrs *attrs)
+{
+	/* attrs is not supported and ignored */
+	dma_free_coherent(dev, size, cpu_addr, dma_handle);
+}
+
 static inline void *dma_alloc_noncoherent(struct device *dev, size_t size,
 					  dma_addr_t *handle, gfp_t flag)
 {

arch/m68k/include/asm/pgtable_no.h

@@ -64,6 +64,8 @@ extern unsigned int kobjsize(const void *objp);
  */
 #define	VMALLOC_START	0
 #define	VMALLOC_END	0xffffffff
+#define	KMAP_START	0
+#define	KMAP_END	0xffffffff
 
 #include <asm-generic/pgtable.h>
 

arch/m68k/include/asm/unistd.h

@@ -4,7 +4,7 @@
 #include <uapi/asm/unistd.h>
 
 
-#define NR_syscalls		348
+#define NR_syscalls		349
 
 #define __ARCH_WANT_OLD_READDIR
 #define __ARCH_WANT_OLD_STAT

arch/m68k/include/uapi/asm/unistd.h

@@ -353,5 +353,6 @@
 #define __NR_process_vm_readv	345
 #define __NR_process_vm_writev	346
 #define __NR_kcmp		347
+#define __NR_finit_module	348
 
 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */

arch/m68k/kernel/syscalltable.S

@@ -368,4 +368,5 @@ ENTRY(sys_call_table)
 	.long sys_process_vm_readv	/* 345 */
 	.long sys_process_vm_writev
 	.long sys_kcmp
+	.long sys_finit_module
 

arch/m68k/mm/init.c

@@ -39,6 +39,11 @@
 void *empty_zero_page;
 EXPORT_SYMBOL(empty_zero_page);
 
+#if !defined(CONFIG_SUN3) && !defined(CONFIG_COLDFIRE)
+extern void init_pointer_table(unsigned long ptable);
+extern pmd_t *zero_pgtable;
+#endif
+
 #ifdef CONFIG_MMU
 
 pg_data_t pg_data_map[MAX_NUMNODES];
@@ -69,9 +74,6 @@ void __init m68k_setup_node(int node)
 	node_set_online(node);
 }
 
-extern void init_pointer_table(unsigned long ptable);
-extern pmd_t *zero_pgtable;
-
 #else /* CONFIG_MMU */
 
 /*

arch/parisc/kernel/entry.S

@@ -1865,7 +1865,7 @@ syscall_restore:
 
 	/* Are we being ptraced? */
 	ldw	TASK_FLAGS(%r1),%r19
-	ldi	(_TIF_SINGLESTEP|_TIF_BLOCKSTEP),%r2
+	ldi	_TIF_SYSCALL_TRACE_MASK,%r2
 	and,COND(=)	%r19,%r2,%r0
 	b,n	syscall_restore_rfi
 
@@ -1978,15 +1978,23 @@ syscall_restore_rfi:
 	/* sr2 should be set to zero for userspace syscalls */
 	STREG	%r0,TASK_PT_SR2(%r1)
 
-pt_regs_ok:
 	LDREG	TASK_PT_GR31(%r1),%r2
-	depi	3,31,2,%r2			   /* ensure return to user mode. */
-	STREG	%r2,TASK_PT_IAOQ0(%r1)
+	depi	3,31,2,%r2		   /* ensure return to user mode. */
+	STREG   %r2,TASK_PT_IAOQ0(%r1)
 	ldo	4(%r2),%r2
 	STREG	%r2,TASK_PT_IAOQ1(%r1)
+	b	intr_restore
 	copy	%r25,%r16
+
+pt_regs_ok:
+	LDREG	TASK_PT_IAOQ0(%r1),%r2
+	depi	3,31,2,%r2		   /* ensure return to user mode. */
+	STREG	%r2,TASK_PT_IAOQ0(%r1)
+	LDREG	TASK_PT_IAOQ1(%r1),%r2
+	depi	3,31,2,%r2
+	STREG	%r2,TASK_PT_IAOQ1(%r1)
 	b	intr_restore
-	nop
+	copy	%r25,%r16
 
 	.import schedule,code
 syscall_do_resched:

arch/parisc/kernel/irq.c

@@ -410,11 +410,13 @@ void __init init_IRQ(void)
 {
 	local_irq_disable();	/* PARANOID - should already be disabled */
 	mtctl(~0UL, 23);	/* EIRR : clear all pending external intr */
-	claim_cpu_irqs();
 #ifdef CONFIG_SMP
-	if (!cpu_eiem)
+	if (!cpu_eiem) {
+		claim_cpu_irqs();
 		cpu_eiem = EIEM_MASK(IPI_IRQ) | EIEM_MASK(TIMER_IRQ);
+	}
 #else
+	claim_cpu_irqs();
 	cpu_eiem = EIEM_MASK(TIMER_IRQ);
 #endif
         set_eiem(cpu_eiem);	/* EIEM : enable all external intr */

arch/parisc/kernel/ptrace.c

@@ -26,7 +26,7 @@
 #include <asm/asm-offsets.h>
 
 /* PSW bits we allow the debugger to modify */
-#define USER_PSW_BITS	(PSW_N | PSW_V | PSW_CB)
+#define USER_PSW_BITS	(PSW_N | PSW_B | PSW_V | PSW_CB)
 
 /*
  * Called by kernel/ptrace.c when detaching..

arch/parisc/kernel/signal.c

@@ -190,8 +190,10 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size)
 	DBG(1,"get_sigframe: ka = %#lx, sp = %#lx, frame_size = %#lx\n",
 			(unsigned long)ka, sp, frame_size);
 	
+	/* Align alternate stack and reserve 64 bytes for the signal
+	   handler's frame marker.  */
 	if ((ka->sa.sa_flags & SA_ONSTACK) != 0 && ! sas_ss_flags(sp))
-		sp = current->sas_ss_sp; /* Stacks grow up! */
+		sp = (current->sas_ss_sp + 0x7f) & ~0x3f; /* Stacks grow up! */
 
 	DBG(1,"get_sigframe: Returning sp = %#lx\n", (unsigned long)sp);
 	return (void __user *) sp; /* Stacks grow up.  Fun. */

arch/parisc/math-emu/cnv_float.h

@@ -347,16 +347,15 @@
     Sgl_isinexact_to_fix(sgl_value,exponent)
 
 #define Duint_from_sgl_mantissa(sgl_value,exponent,dresultA,dresultB)	\
-  {Sall(sgl_value) <<= SGL_EXP_LENGTH;  /*  left-justify  */		\
+  {unsigned int val = Sall(sgl_value) << SGL_EXP_LENGTH;		\
     if (exponent <= 31) {						\
-    	Dintp1(dresultA) = 0;						\
-    	Dintp2(dresultB) = (unsigned)Sall(sgl_value) >> (31 - exponent); \
+	Dintp1(dresultA) = 0;						\
+	Dintp2(dresultB) = val >> (31 - exponent);			\
     }									\
     else {								\
-    	Dintp1(dresultA) = Sall(sgl_value) >> (63 - exponent);		\
-    	Dintp2(dresultB) = Sall(sgl_value) << (exponent - 31);		\
+	Dintp1(dresultA) = val >> (63 - exponent);			\
+	Dintp2(dresultB) = exponent <= 62 ? val << (exponent - 31) : 0;	\
     }									\
-    Sall(sgl_value) >>= SGL_EXP_LENGTH;  /* return to original */	\
   }
 
 #define Duint_setzero(dresultA,dresultB) 	\

arch/powerpc/kvm/emulate.c

@@ -39,6 +39,7 @@
 #define OP_31_XOP_TRAP      4
 #define OP_31_XOP_LWZX      23
 #define OP_31_XOP_TRAP_64   68
+#define OP_31_XOP_DCBF      86
 #define OP_31_XOP_LBZX      87
 #define OP_31_XOP_STWX      151
 #define OP_31_XOP_STBX      215
@@ -374,6 +375,7 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu)
 			emulated = kvmppc_emulate_mtspr(vcpu, sprn, rs);
 			break;
 
+		case OP_31_XOP_DCBF:
 		case OP_31_XOP_DCBI:
 			/* Do nothing. The guest is performing dcbi because
 			 * hardware DMA is not snooped by the dcache, but

arch/x86/kernel/cpu/perf_event.c

@@ -340,9 +340,6 @@ int x86_setup_perfctr(struct perf_event *event)
 		/* BTS is currently only allowed for user-mode. */
 		if (!attr->exclude_kernel)
 			return -EOPNOTSUPP;
-
-		if (!attr->exclude_guest)
-			return -EOPNOTSUPP;
 	}
 
 	hwc->config |= config;
@@ -385,9 +382,6 @@ int x86_pmu_hw_config(struct perf_event *event)
 	if (event->attr.precise_ip) {
 		int precise = 0;
 
-		if (!event->attr.exclude_guest)
-			return -EOPNOTSUPP;
-
 		/* Support for constant skid */
 		if (x86_pmu.pebs_active && !x86_pmu.pebs_broken) {
 			precise++;

arch/x86/kernel/entry_32.S

@@ -1065,7 +1065,6 @@ ENTRY(xen_failsafe_callback)
 	lea 16(%esp),%esp
 	CFI_ADJUST_CFA_OFFSET -16
 	jz 5f
-	addl $16,%esp
 	jmp iret_exc
 5:	pushl_cfi $-1 /* orig_ax = -1 => not a system call */
 	SAVE_ALL

arch/x86/kernel/step.c

@@ -165,10 +165,11 @@ void set_task_blockstep(struct task_struct *task, bool on)
 	 * Ensure irq/preemption can't change debugctl in between.
 	 * Note also that both TIF_BLOCKSTEP and debugctl should
 	 * be changed atomically wrt preemption.
-	 * FIXME: this means that set/clear TIF_BLOCKSTEP is simply
-	 * wrong if task != current, SIGKILL can wakeup the stopped
-	 * tracee and set/clear can play with the running task, this
-	 * can confuse the next __switch_to_xtra().
+	 *
+	 * NOTE: this means that set/clear TIF_BLOCKSTEP is only safe if
+	 * task is current or it can't be running, otherwise we can race
+	 * with __switch_to_xtra(). We rely on ptrace_freeze_traced() but
+	 * PTRACE_KILL is not safe.
 	 */
 	local_irq_disable();
 	debugctl = get_debugctlmsr();

arch/x86/xen/smp.c

@@ -432,13 +432,6 @@ static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */
 	play_dead_common();
 	HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);
 	cpu_bringup();
-	/*
-	 * Balance out the preempt calls - as we are running in cpu_idle
-	 * loop which has been called at bootup from cpu_bringup_and_idle.
-	 * The cpucpu_bringup_and_idle called cpu_bringup which made a
-	 * preempt_disable() So this preempt_enable will balance it out.
-	 */
-	preempt_enable();
 }
 
 #else /* !CONFIG_HOTPLUG_CPU */

drivers/acpi/apei/apei-base.c

@@ -590,6 +590,9 @@ static int apei_check_gar(struct acpi_generic_address *reg, u64 *paddr,
 	if (bit_width == 32 && bit_offset == 0 && (*paddr & 0x03) == 0 &&
 	    *access_bit_width < 32)
 		*access_bit_width = 32;
+	else if (bit_width == 64 && bit_offset == 0 && (*paddr & 0x07) == 0 &&
+	    *access_bit_width < 64)
+		*access_bit_width = 64;
 
 	if ((bit_width + bit_offset) > *access_bit_width) {
 		pr_warning(FW_BUG APEI_PFX

drivers/acpi/processor_idle.c

@@ -958,6 +958,9 @@ static int acpi_processor_setup_cpuidle_cx(struct acpi_processor *pr)
 		return -EINVAL;
 	}
 
+	if (!dev)
+		return -EINVAL;
+
 	dev->cpu = pr->id;
 
 	if (max_cstate == 0)
@@ -1149,6 +1152,7 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr)
 		}
 
 		/* Populate Updated C-state information */
+		acpi_processor_get_power_info(pr);
 		acpi_processor_setup_cpuidle_states(pr);
 
 		/* Enable all cpuidle devices */

drivers/acpi/processor_perflib.c

@@ -340,6 +340,13 @@ static void amd_fixup_frequency(struct acpi_processor_px *px, int i)
 	if ((boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model < 10)
 	    || boot_cpu_data.x86 == 0x11) {
 		rdmsr(MSR_AMD_PSTATE_DEF_BASE + index, lo, hi);
+		/*
+		 * MSR C001_0064+:
+		 * Bit 63: PstateEn. Read-write. If set, the P-state is valid.
+		 */
+		if (!(hi & BIT(31)))
+			return;
+
 		fid = lo & 0x3f;
 		did = (lo >> 6) & 7;
 		if (boot_cpu_data.x86 == 0x10)

drivers/ata/ahci.c

@@ -53,6 +53,7 @@
 
 enum {
 	AHCI_PCI_BAR_STA2X11	= 0,
+	AHCI_PCI_BAR_ENMOTUS	= 2,
 	AHCI_PCI_BAR_STANDARD	= 5,
 };
 
@@ -410,6 +411,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci },	/* ASM1061 */
 	{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci },	/* ASM1062 */
 
+	/* Enmotus */
+	{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
+
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -1098,9 +1102,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_info(&pdev->dev,
 			 "PDC42819 can only drive SATA devices with this driver\n");
 
-	/* The Connext uses non-standard BAR */
+	/* Both Connext and Enmotus devices use non-standard BARs */
 	if (pdev->vendor == PCI_VENDOR_ID_STMICRO && pdev->device == 0xCC06)
 		ahci_pci_bar = AHCI_PCI_BAR_STA2X11;
+	else if (pdev->vendor == 0x1c44 && pdev->device == 0x8000)
+		ahci_pci_bar = AHCI_PCI_BAR_ENMOTUS;
 
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);

drivers/ata/libahci.c

@@ -1951,13 +1951,13 @@ static void ahci_set_aggressive_devslp(struct ata_port *ap, bool sleep)
 	/* Use the nominal value 10 ms if the read MDAT is zero,
 	 * the nominal value of DETO is 20 ms.
 	 */
-	if (dev->sata_settings[ATA_LOG_DEVSLP_VALID] &
+	if (dev->devslp_timing[ATA_LOG_DEVSLP_VALID] &
 	    ATA_LOG_DEVSLP_VALID_MASK) {
-		mdat = dev->sata_settings[ATA_LOG_DEVSLP_MDAT] &
+		mdat = dev->devslp_timing[ATA_LOG_DEVSLP_MDAT] &
 		       ATA_LOG_DEVSLP_MDAT_MASK;
 		if (!mdat)
 			mdat = 10;
-		deto = dev->sata_settings[ATA_LOG_DEVSLP_DETO];
+		deto = dev->devslp_timing[ATA_LOG_DEVSLP_DETO];
 		if (!deto)
 			deto = 20;
 	} else {

drivers/ata/libata-core.c

@@ -2325,24 +2325,28 @@ int ata_dev_configure(struct ata_device *dev)
 			}
 		}
 
-		/* check and mark DevSlp capability */
-		if (ata_id_has_devslp(dev->id))
-			dev->flags |= ATA_DFLAG_DEVSLP;
-
-		/* Obtain SATA Settings page from Identify Device Data Log,
-		 * which contains DevSlp timing variables etc.
-		 * Exclude old devices with ata_id_has_ncq()
+		/* Check and mark DevSlp capability. Get DevSlp timing variables
+		 * from SATA Settings page of Identify Device Data Log.
 		 */
-		if (ata_id_has_ncq(dev->id)) {
+		if (ata_id_has_devslp(dev->id)) {
+			u8 sata_setting[ATA_SECT_SIZE];
+			int i, j;
+
+			dev->flags |= ATA_DFLAG_DEVSLP;
 			err_mask = ata_read_log_page(dev,
 						     ATA_LOG_SATA_ID_DEV_DATA,
 						     ATA_LOG_SATA_SETTINGS,
-						     dev->sata_settings,
+						     sata_setting,
 						     1);
 			if (err_mask)
 				ata_dev_dbg(dev,
 					    "failed to get Identify Device Data, Emask 0x%x\n",
 					    err_mask);
+			else
+				for (i = 0; i < ATA_LOG_DEVSLP_SIZE; i++) {
+					j = ATA_LOG_DEVSLP_OFFSET + i;
+					dev->devslp_timing[i] = sata_setting[j];
+				}
 		}
 
 		dev->cdb_len = 16;

drivers/ata/libata-eh.c

@@ -2094,7 +2094,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
  */
 static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc)
 {
-	if (qc->flags & AC_ERR_MEDIA)
+	if (qc->err_mask & AC_ERR_MEDIA)
 		return 0;	/* don't retry media errors */
 	if (qc->flags & ATA_QCFLAG_IO)
 		return 1;	/* otherwise retry anything from fs stack */

drivers/base/regmap/regmap-debugfs.c

@@ -121,8 +121,6 @@ static unsigned int regmap_debugfs_get_dump_start(struct regmap *map,
 		c->max = p - 1;
 		list_add_tail(&c->list,
 			      &map->debugfs_off_cache);
-	} else {
-		return base;
 	}
 
 	/*

drivers/base/regmap/regmap.c

@@ -1106,7 +1106,7 @@ EXPORT_SYMBOL_GPL(regmap_raw_write);
  * @val_count: Number of registers to write
  *
  * This function is intended to be used for writing a large block of
- * data to be device either in single transfer or multiple transfer.
+ * data to the device either in single transfer or multiple transfer.
  *
  * A value of zero will be returned on success, a negative errno will
  * be returned in error cases.

drivers/block/virtio_blk.c

@@ -889,6 +889,7 @@ static void virtblk_remove(struct virtio_device *vdev)
 {
 	struct virtio_blk *vblk = vdev->priv;
 	int index = vblk->index;
+	int refc;
 
 	/* Prevent config work handler from accessing the device. */
 	mutex_lock(&vblk->config_lock);
@@ -903,11 +904,15 @@ static void virtblk_remove(struct virtio_device *vdev)
 
 	flush_work(&vblk->config_work);
 
+	refc = atomic_read(&disk_to_dev(vblk->disk)->kobj.kref.refcount);
 	put_disk(vblk->disk);
 	mempool_destroy(vblk->pool);
 	vdev->config->del_vqs(vdev);
 	kfree(vblk);
-	ida_simple_remove(&vd_index_ida, index);
+
+	/* Only free device id if we don't have any users */
+	if (refc == 1)
+		ida_simple_remove(&vd_index_ida, index);
 }
 
 #ifdef CONFIG_PM

drivers/clk/mvebu/clk-cpu.c

@@ -124,7 +124,7 @@ void __init of_cpu_clk_setup(struct device_node *node)
 
 	clks = kzalloc(ncpus * sizeof(*clks), GFP_KERNEL);
 	if (WARN_ON(!clks))
-		return;
+		goto clks_out;
 
 	for_each_node_by_type(dn, "cpu") {
 		struct clk_init_data init;
@@ -134,11 +134,11 @@ void __init of_cpu_clk_setup(struct device_node *node)
 		int cpu, err;
 
 		if (WARN_ON(!clk_name))
-			return;
+			goto bail_out;
 
 		err = of_property_read_u32(dn, "reg", &cpu);
 		if (WARN_ON(err))
-			return;
+			goto bail_out;
 
 		sprintf(clk_name, "cpu%d", cpu);
 		parent_clk = of_clk_get(node, 0);
@@ -167,6 +167,9 @@ void __init of_cpu_clk_setup(struct device_node *node)
 	return;
 bail_out:
 	kfree(clks);
+	while(ncpus--)
+		kfree(cpuclk[ncpus].clk_name);
+clks_out:
 	kfree(cpuclk);
 }
 

drivers/cpufreq/Kconfig.x86

@@ -106,7 +106,7 @@ config X86_POWERNOW_K7_ACPI
 config X86_POWERNOW_K8
 	tristate "AMD Opteron/Athlon64 PowerNow!"
 	select CPU_FREQ_TABLE
-	depends on ACPI && ACPI_PROCESSOR
+	depends on ACPI && ACPI_PROCESSOR && X86_ACPI_CPUFREQ
 	help
 	  This adds the CPUFreq driver for K8/early Opteron/Athlon64 processors.
 	  Support for K10 and newer processors is now in acpi-cpufreq.

drivers/cpufreq/acpi-cpufreq.c

@@ -1030,4 +1030,11 @@ MODULE_PARM_DESC(acpi_pstate_strict,
 late_initcall(acpi_cpufreq_init);
 module_exit(acpi_cpufreq_exit);
 
+static const struct x86_cpu_id acpi_cpufreq_ids[] = {
+	X86_FEATURE_MATCH(X86_FEATURE_ACPI),
+	X86_FEATURE_MATCH(X86_FEATURE_HW_PSTATE),
+	{}
+};
+MODULE_DEVICE_TABLE(x86cpu, acpi_cpufreq_ids);
+
 MODULE_ALIAS("acpi");

drivers/cpufreq/cpufreq-cpu0.c

@@ -71,12 +71,15 @@ static int cpu0_set_target(struct cpufreq_policy *policy,
 	}
 
 	if (cpu_reg) {
+		rcu_read_lock();
 		opp = opp_find_freq_ceil(cpu_dev, &freq_Hz);
 		if (IS_ERR(opp)) {
+			rcu_read_unlock();
 			pr_err("failed to find OPP for %ld\n", freq_Hz);
 			return PTR_ERR(opp);
 		}
 		volt = opp_get_voltage(opp);
+		rcu_read_unlock();
 		tol = volt * voltage_tolerance / 100;
 		volt_old = regulator_get_voltage(cpu_reg);
 	}
@@ -236,12 +239,14 @@ static int cpu0_cpufreq_driver_init(void)
 		 */
 		for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
 			;
+		rcu_read_lock();
 		opp = opp_find_freq_exact(cpu_dev,
 				freq_table[0].frequency * 1000, true);
 		min_uV = opp_get_voltage(opp);
 		opp = opp_find_freq_exact(cpu_dev,
 				freq_table[i-1].frequency * 1000, true);
 		max_uV = opp_get_voltage(opp);
+		rcu_read_unlock();
 		ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
 		if (ret > 0)
 			transition_latency += ret * 1000;

drivers/cpufreq/omap-cpufreq.c

@@ -110,13 +110,16 @@ static int omap_target(struct cpufreq_policy *policy,
 	freq = ret;
 
 	if (mpu_reg) {
+		rcu_read_lock();
 		opp = opp_find_freq_ceil(mpu_dev, &freq);
 		if (IS_ERR(opp)) {
+			rcu_read_unlock();
 			dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
 				__func__, freqs.new);
 			return -EINVAL;
 		}
 		volt = opp_get_voltage(opp);
+		rcu_read_unlock();
 		tol = volt * OPP_TOLERANCE / 100;
 		volt_old = regulator_get_voltage(mpu_reg);
 	}

drivers/devfreq/devfreq.c

@@ -994,6 +994,11 @@ module_exit(devfreq_exit);
  * @freq:	The frequency given to target function
  * @flags:	Flags handed from devfreq framework.
  *
+ * Locking: This function must be called under rcu_read_lock(). opp is a rcu
+ * protected pointer. The reason for the same is that the opp pointer which is
+ * returned will remain valid for use with opp_get_{voltage, freq} only while
+ * under the locked area. The pointer returned must be used prior to unlocking
+ * with rcu_read_unlock() to maintain the integrity of the pointer.
  */
 struct opp *devfreq_recommended_opp(struct device *dev, unsigned long *freq,
 				    u32 flags)

drivers/devfreq/exynos4_bus.c

@@ -73,6 +73,16 @@ enum busclk_level_idx {
 #define EX4210_LV_NUM	(LV_2 + 1)
 #define EX4x12_LV_NUM	(LV_4 + 1)
 
+/**
+ * struct busfreq_opp_info - opp information for bus
+ * @rate:	Frequency in hertz
+ * @volt:	Voltage in microvolts corresponding to this OPP
+ */
+struct busfreq_opp_info {
+	unsigned long rate;
+	unsigned long volt;
+};
+
 struct busfreq_data {
 	enum exynos4_busf_type type;
 	struct device *dev;
@@ -80,7 +90,7 @@ struct busfreq_data {
 	bool disabled;
 	struct regulator *vdd_int;
 	struct regulator *vdd_mif; /* Exynos4412/4212 only */
-	struct opp *curr_opp;
+	struct busfreq_opp_info curr_oppinfo;
 	struct exynos4_ppmu dmc[2];
 
 	struct notifier_block pm_notifier;
@@ -296,13 +306,14 @@ static unsigned int exynos4x12_clkdiv_sclkip[][3] = {
 };
 
 
-static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp)
+static int exynos4210_set_busclk(struct busfreq_data *data,
+				 struct busfreq_opp_info *oppi)
 {
 	unsigned int index;
 	unsigned int tmp;
 
 	for (index = LV_0; index < EX4210_LV_NUM; index++)
-		if (opp_get_freq(opp) == exynos4210_busclk_table[index].clk)
+		if (oppi->rate == exynos4210_busclk_table[index].clk)
 			break;
 
 	if (index == EX4210_LV_NUM)
@@ -361,13 +372,14 @@ static int exynos4210_set_busclk(struct busfreq_data *data, struct opp *opp)
 	return 0;
 }
 
-static int exynos4x12_set_busclk(struct busfreq_data *data, struct opp *opp)
+static int exynos4x12_set_busclk(struct busfreq_data *data,
+				 struct busfreq_opp_info *oppi)
 {
 	unsigned int index;
 	unsigned int tmp;
 
 	for (index = LV_0; index < EX4x12_LV_NUM; index++)
-		if (opp_get_freq(opp) == exynos4x12_mifclk_table[index].clk)
+		if (oppi->rate == exynos4x12_mifclk_table[index].clk)
 			break;
 
 	if (index == EX4x12_LV_NUM)
@@ -576,11 +588,12 @@ static int exynos4x12_get_intspec(unsigned long mifclk)
 	return -EINVAL;
 }
 
-static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp,
-			       struct opp *oldopp)
+static int exynos4_bus_setvolt(struct busfreq_data *data,
+			       struct busfreq_opp_info *oppi,
+			       struct busfreq_opp_info *oldoppi)
 {
 	int err = 0, tmp;
-	unsigned long volt = opp_get_voltage(opp);
+	unsigned long volt = oppi->volt;
 
 	switch (data->type) {
 	case TYPE_BUSF_EXYNOS4210:
@@ -595,11 +608,11 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp,
 		if (err)
 			break;
 
-		tmp = exynos4x12_get_intspec(opp_get_freq(opp));
+		tmp = exynos4x12_get_intspec(oppi->rate);
 		if (tmp < 0) {
 			err = tmp;
 			regulator_set_voltage(data->vdd_mif,
-					      opp_get_voltage(oldopp),
+					      oldoppi->volt,
 					      MAX_SAFEVOLT);
 			break;
 		}
@@ -609,7 +622,7 @@ static int exynos4_bus_setvolt(struct busfreq_data *data, struct opp *opp,
 		/*  Try to recover */
 		if (err)
 			regulator_set_voltage(data->vdd_mif,
-					      opp_get_voltage(oldopp),
+					      oldoppi->volt,
 					      MAX_SAFEVOLT);
 		break;
 	default:
@@ -626,17 +639,26 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
 	struct platform_device *pdev = container_of(dev, struct platform_device,
 						    dev);
 	struct busfreq_data *data = platform_get_drvdata(pdev);
-	struct opp *opp = devfreq_recommended_opp(dev, _freq, flags);
-	unsigned long freq = opp_get_freq(opp);
-	unsigned long old_freq = opp_get_freq(data->curr_opp);
+	struct opp *opp;
+	unsigned long freq;
+	unsigned long old_freq = data->curr_oppinfo.rate;
+	struct busfreq_opp_info	new_oppinfo;
 
-	if (IS_ERR(opp))
+	rcu_read_lock();
+	opp = devfreq_recommended_opp(dev, _freq, flags);
+	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		return PTR_ERR(opp);
+	}
+	new_oppinfo.rate = opp_get_freq(opp);
+	new_oppinfo.volt = opp_get_voltage(opp);
+	rcu_read_unlock();
+	freq = new_oppinfo.rate;
 
 	if (old_freq == freq)
 		return 0;
 
-	dev_dbg(dev, "targetting %lukHz %luuV\n", freq, opp_get_voltage(opp));
+	dev_dbg(dev, "targetting %lukHz %luuV\n", freq, new_oppinfo.volt);
 
 	mutex_lock(&data->lock);
 
@@ -644,17 +666,18 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
 		goto out;
 
 	if (old_freq < freq)
-		err = exynos4_bus_setvolt(data, opp, data->curr_opp);
+		err = exynos4_bus_setvolt(data, &new_oppinfo,
+					  &data->curr_oppinfo);
 	if (err)
 		goto out;
 
 	if (old_freq != freq) {
 		switch (data->type) {
 		case TYPE_BUSF_EXYNOS4210:
-			err = exynos4210_set_busclk(data, opp);
+			err = exynos4210_set_busclk(data, &new_oppinfo);
 			break;
 		case TYPE_BUSF_EXYNOS4x12:
-			err = exynos4x12_set_busclk(data, opp);
+			err = exynos4x12_set_busclk(data, &new_oppinfo);
 			break;
 		default:
 			err = -EINVAL;
@@ -664,11 +687,12 @@ static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
 		goto out;
 
 	if (old_freq > freq)
-		err = exynos4_bus_setvolt(data, opp, data->curr_opp);
+		err = exynos4_bus_setvolt(data, &new_oppinfo,
+					  &data->curr_oppinfo);
 	if (err)
 		goto out;
 
-	data->curr_opp = opp;
+	data->curr_oppinfo = new_oppinfo;
 out:
 	mutex_unlock(&data->lock);
 	return err;
@@ -702,7 +726,7 @@ static int exynos4_bus_get_dev_status(struct device *dev,
 
 	exynos4_read_ppmu(data);
 	busier_dmc = exynos4_get_busier_dmc(data);
-	stat->current_frequency = opp_get_freq(data->curr_opp);
+	stat->current_frequency = data->curr_oppinfo.rate;
 
 	if (busier_dmc)
 		addr = S5P_VA_DMC1;
@@ -933,6 +957,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
 	struct busfreq_data *data = container_of(this, struct busfreq_data,
 						 pm_notifier);
 	struct opp *opp;
+	struct busfreq_opp_info	new_oppinfo;
 	unsigned long maxfreq = ULONG_MAX;
 	int err = 0;
 
@@ -943,18 +968,29 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
 
 		data->disabled = true;
 
+		rcu_read_lock();
 		opp = opp_find_freq_floor(data->dev, &maxfreq);
+		if (IS_ERR(opp)) {
+			rcu_read_unlock();
+			dev_err(data->dev, "%s: unable to find a min freq\n",
+				__func__);
+			return PTR_ERR(opp);
+		}
+		new_oppinfo.rate = opp_get_freq(opp);
+		new_oppinfo.volt = opp_get_voltage(opp);
+		rcu_read_unlock();
 
-		err = exynos4_bus_setvolt(data, opp, data->curr_opp);
+		err = exynos4_bus_setvolt(data, &new_oppinfo,
+					  &data->curr_oppinfo);
 		if (err)
 			goto unlock;
 
 		switch (data->type) {
 		case TYPE_BUSF_EXYNOS4210:
-			err = exynos4210_set_busclk(data, opp);
+			err = exynos4210_set_busclk(data, &new_oppinfo);
 			break;
 		case TYPE_BUSF_EXYNOS4x12:
-			err = exynos4x12_set_busclk(data, opp);
+			err = exynos4x12_set_busclk(data, &new_oppinfo);
 			break;
 		default:
 			err = -EINVAL;
@@ -962,7 +998,7 @@ static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
 		if (err)
 			goto unlock;
 
-		data->curr_opp = opp;
+		data->curr_oppinfo = new_oppinfo;
 unlock:
 		mutex_unlock(&data->lock);
 		if (err)
@@ -1027,13 +1063,17 @@ static int exynos4_busfreq_probe(struct platform_device *pdev)
 		}
 	}
 
+	rcu_read_lock();
 	opp = opp_find_freq_floor(dev, &exynos4_devfreq_profile.initial_freq);
 	if (IS_ERR(opp)) {
+		rcu_read_unlock();
 		dev_err(dev, "Invalid initial frequency %lu kHz.\n",
 			exynos4_devfreq_profile.initial_freq);
 		return PTR_ERR(opp);
 	}
-	data->curr_opp = opp;
+	data->curr_oppinfo.rate = opp_get_freq(opp);
+	data->curr_oppinfo.volt = opp_get_voltage(opp);
+	rcu_read_unlock();
 
 	platform_set_drvdata(pdev, data);
 

drivers/dma/imx-dma.c

@@ -684,9 +684,8 @@ static int imxdma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
 			break;
 		}
 
-		imxdmac->hw_chaining = 1;
-		if (!imxdma_hw_chain(imxdmac))
-			return -EINVAL;
+		imxdmac->hw_chaining = 0;
+
 		imxdmac->ccr_from_device = (mode | IMX_DMA_TYPE_FIFO) |
 			((IMX_DMA_MEMSIZE_32 | IMX_DMA_TYPE_LINEAR) << 2) |
 			CCR_REN;

drivers/dma/ioat/dma_v3.c

@@ -951,7 +951,7 @@ static int ioat_xor_val_self_test(struct ioatdma_device *device)
 			goto free_resources;
 		}
 	}
-	dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_TO_DEVICE);
+	dma_sync_single_for_device(dev, dest_dma, PAGE_SIZE, DMA_FROM_DEVICE);
 
 	/* skip validate if the capability is not present */
 	if (!dma_has_cap(DMA_XOR_VAL, dma_chan->device->cap_mask))

drivers/dma/tegra20-apb-dma.c

@@ -266,6 +266,7 @@ static struct tegra_dma_desc *tegra_dma_desc_get(
 		if (async_tx_test_ack(&dma_desc->txd)) {
 			list_del(&dma_desc->node);
 			spin_unlock_irqrestore(&tdc->lock, flags);
+			dma_desc->txd.flags = 0;
 			return dma_desc;
 		}
 	}
@@ -1050,7 +1051,9 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 					TEGRA_APBDMA_AHBSEQ_WRAP_SHIFT;
 	ahb_seq |= TEGRA_APBDMA_AHBSEQ_BUS_WIDTH_32;
 
-	csr |= TEGRA_APBDMA_CSR_FLOW | TEGRA_APBDMA_CSR_IE_EOC;
+	csr |= TEGRA_APBDMA_CSR_FLOW;
+	if (flags & DMA_PREP_INTERRUPT)
+		csr |= TEGRA_APBDMA_CSR_IE_EOC;
 	csr |= tdc->dma_sconfig.slave_id << TEGRA_APBDMA_CSR_REQ_SEL_SHIFT;
 
 	apb_seq |= TEGRA_APBDMA_APBSEQ_WRAP_WORD_1;
@@ -1095,7 +1098,8 @@ struct dma_async_tx_descriptor *tegra_dma_prep_dma_cyclic(
 		mem += len;
 	}
 	sg_req->last_sg = true;
-	dma_desc->txd.flags = 0;
+	if (flags & DMA_CTRL_ACK)
+		dma_desc->txd.flags = DMA_CTRL_ACK;
 
 	/*
 	 * Make sure that mode should not be conflicting with currently

drivers/gpio/gpio-mvebu.c

@@ -547,7 +547,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 	mvchip->membase = devm_request_and_ioremap(&pdev->dev, res);
 	if (! mvchip->membase) {
 		dev_err(&pdev->dev, "Cannot ioremap\n");
-		kfree(mvchip->chip.label);
 		return -ENOMEM;
 	}
 
@@ -557,14 +556,12 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 		res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
 		if (! res) {
 			dev_err(&pdev->dev, "Cannot get memory resource\n");
-			kfree(mvchip->chip.label);
 			return -ENODEV;
 		}
 
 		mvchip->percpu_membase = devm_request_and_ioremap(&pdev->dev, res);
 		if (! mvchip->percpu_membase) {
 			dev_err(&pdev->dev, "Cannot ioremap\n");
-			kfree(mvchip->chip.label);
 			return -ENOMEM;
 		}
 	}
@@ -625,7 +622,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 	mvchip->irqbase = irq_alloc_descs(-1, 0, ngpios, -1);
 	if (mvchip->irqbase < 0) {
 		dev_err(&pdev->dev, "no irqs\n");
-		kfree(mvchip->chip.label);
 		return -ENOMEM;
 	}
 
@@ -633,7 +629,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 				    mvchip->membase, handle_level_irq);
 	if (! gc) {
 		dev_err(&pdev->dev, "Cannot allocate generic irq_chip\n");
-		kfree(mvchip->chip.label);
 		return -ENOMEM;
 	}
 
@@ -668,7 +663,6 @@ static int mvebu_gpio_probe(struct platform_device *pdev)
 		irq_remove_generic_chip(gc, IRQ_MSK(ngpios), IRQ_NOREQUEST,
 					IRQ_LEVEL | IRQ_NOPROBE);
 		kfree(gc);
-		kfree(mvchip->chip.label);
 		return -ENODEV;
 	}
 

drivers/gpio/gpio-samsung.c

@@ -32,7 +32,6 @@
 
 #include <mach/hardware.h>
 #include <mach/map.h>
-#include <mach/regs-clock.h>
 #include <mach/regs-gpio.h>
 
 #include <plat/cpu.h>
@@ -446,7 +445,7 @@ static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = {
 };
 #endif
 
-#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_ARCH_EXYNOS5)
+#if defined(CONFIG_ARCH_EXYNOS4) || defined(CONFIG_SOC_EXYNOS5250)
 static struct samsung_gpio_cfg exynos_gpio_cfg = {
 	.set_pull	= exynos_gpio_setpull,
 	.get_pull	= exynos_gpio_getpull,
@@ -2446,7 +2445,7 @@ static struct samsung_gpio_chip exynos4_gpios_3[] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_EXYNOS5
+#ifdef CONFIG_SOC_EXYNOS5250
 static struct samsung_gpio_chip exynos5_gpios_1[] = {
 	{
 		.chip	= {
@@ -2614,7 +2613,7 @@ static struct samsung_gpio_chip exynos5_gpios_1[] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_EXYNOS5
+#ifdef CONFIG_SOC_EXYNOS5250
 static struct samsung_gpio_chip exynos5_gpios_2[] = {
 	{
 		.chip	= {
@@ -2675,7 +2674,7 @@ static struct samsung_gpio_chip exynos5_gpios_2[] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_EXYNOS5
+#ifdef CONFIG_SOC_EXYNOS5250
 static struct samsung_gpio_chip exynos5_gpios_3[] = {
 	{
 		.chip	= {
@@ -2711,7 +2710,7 @@ static struct samsung_gpio_chip exynos5_gpios_3[] = {
 };
 #endif
 
-#ifdef CONFIG_ARCH_EXYNOS5
+#ifdef CONFIG_SOC_EXYNOS5250
 static struct samsung_gpio_chip exynos5_gpios_4[] = {
 	{
 		.chip	= {
@@ -3010,7 +3009,7 @@ static __init int samsung_gpiolib_init(void)
 	int i, nr_chips;
 	int group = 0;
 
-#ifdef CONFIG_PINCTRL_SAMSUNG
+#if defined(CONFIG_PINCTRL_EXYNOS) || defined(CONFIG_PINCTRL_EXYNOS5440)
 	/*
 	* This gpio driver includes support for device tree support and there
 	* are platforms using it. In order to maintain compatibility with those
@@ -3026,6 +3025,7 @@ static __init int samsung_gpiolib_init(void)
 	static const struct of_device_id exynos_pinctrl_ids[] = {
 		{ .compatible = "samsung,pinctrl-exynos4210", },
 		{ .compatible = "samsung,pinctrl-exynos4x12", },
+		{ .compatible = "samsung,pinctrl-exynos5440", },
 	};
 	for_each_matching_node(pctrl_np, exynos_pinctrl_ids)
 		if (pctrl_np && of_device_is_available(pctrl_np))

drivers/gpu/drm/i915/i915_debugfs.c

@@ -641,6 +641,7 @@ static void i915_ring_error_state(struct seq_file *m,
 	seq_printf(m, "%s command stream:\n", ring_str(ring));
 	seq_printf(m, "  HEAD: 0x%08x\n", error->head[ring]);
 	seq_printf(m, "  TAIL: 0x%08x\n", error->tail[ring]);
+	seq_printf(m, "  CTL: 0x%08x\n", error->ctl[ring]);
 	seq_printf(m, "  ACTHD: 0x%08x\n", error->acthd[ring]);
 	seq_printf(m, "  IPEIR: 0x%08x\n", error->ipeir[ring]);
 	seq_printf(m, "  IPEHR: 0x%08x\n", error->ipehr[ring]);
@@ -693,6 +694,8 @@ static int i915_error_state(struct seq_file *m, void *unused)
 	seq_printf(m, "EIR: 0x%08x\n", error->eir);
 	seq_printf(m, "IER: 0x%08x\n", error->ier);
 	seq_printf(m, "PGTBL_ER: 0x%08x\n", error->pgtbl_er);
+	seq_printf(m, "FORCEWAKE: 0x%08x\n", error->forcewake);
+	seq_printf(m, "DERRMR: 0x%08x\n", error->derrmr);
 	seq_printf(m, "CCID: 0x%08x\n", error->ccid);
 
 	for (i = 0; i < dev_priv->num_fence_regs; i++)

drivers/gpu/drm/i915/i915_drv.h

@@ -188,10 +188,13 @@ struct drm_i915_error_state {
 	u32 pgtbl_er;
 	u32 ier;
 	u32 ccid;
+	u32 derrmr;
+	u32 forcewake;
 	bool waiting[I915_NUM_RINGS];
 	u32 pipestat[I915_MAX_PIPES];
 	u32 tail[I915_NUM_RINGS];
 	u32 head[I915_NUM_RINGS];
+	u32 ctl[I915_NUM_RINGS];
 	u32 ipeir[I915_NUM_RINGS];
 	u32 ipehr[I915_NUM_RINGS];
 	u32 instdone[I915_NUM_RINGS];

drivers/gpu/drm/i915/i915_gem_execbuffer.c

@@ -539,6 +539,8 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
 	total = 0;
 	for (i = 0; i < count; i++) {
 		struct drm_i915_gem_relocation_entry __user *user_relocs;
+		u64 invalid_offset = (u64)-1;
+		int j;
 
 		user_relocs = (void __user *)(uintptr_t)exec[i].relocs_ptr;
 
@@ -549,6 +551,25 @@ i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
 			goto err;
 		}
 
+		/* As we do not update the known relocation offsets after
+		 * relocating (due to the complexities in lock handling),
+		 * we need to mark them as invalid now so that we force the
+		 * relocation processing next time. Just in case the target
+		 * object is evicted and then rebound into its old
+		 * presumed_offset before the next execbuffer - if that
+		 * happened we would make the mistake of assuming that the
+		 * relocations were valid.
+		 */
+		for (j = 0; j < exec[i].relocation_count; j++) {
+			if (copy_to_user(&user_relocs[j].presumed_offset,
+					 &invalid_offset,
+					 sizeof(invalid_offset))) {
+				ret = -EFAULT;
+				mutex_lock(&dev->struct_mutex);
+				goto err;
+			}
+		}
+
 		reloc_offset[i] = total;
 		total += exec[i].relocation_count;
 	}

drivers/gpu/drm/i915/i915_irq.c

@@ -1157,6 +1157,7 @@ static void i915_record_ring_state(struct drm_device *dev,
 	error->acthd[ring->id] = intel_ring_get_active_head(ring);
 	error->head[ring->id] = I915_READ_HEAD(ring);
 	error->tail[ring->id] = I915_READ_TAIL(ring);
+	error->ctl[ring->id] = I915_READ_CTL(ring);
 
 	error->cpu_ring_head[ring->id] = ring->head;
 	error->cpu_ring_tail[ring->id] = ring->tail;
@@ -1251,6 +1252,16 @@ static void i915_capture_error_state(struct drm_device *dev)
 	else
 		error->ier = I915_READ(IER);
 
+	if (INTEL_INFO(dev)->gen >= 6)
+		error->derrmr = I915_READ(DERRMR);
+
+	if (IS_VALLEYVIEW(dev))
+		error->forcewake = I915_READ(FORCEWAKE_VLV);
+	else if (INTEL_INFO(dev)->gen >= 7)
+		error->forcewake = I915_READ(FORCEWAKE_MT);
+	else if (INTEL_INFO(dev)->gen == 6)
+		error->forcewake = I915_READ(FORCEWAKE);
+
 	for_each_pipe(pipe)
 		error->pipestat[pipe] = I915_READ(PIPESTAT(pipe));