[ARM] Dove: add support for CM-A510 machine.

This patch adds support for CM-A510 machine
Signed-off-by: NKonstantin Sinyuk <kostyas@compulab.co.il>
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Reviewed-by: NSaeed Bishara <saeed@marvell.com>
Signed-off-by: NNicolas Pitre <nico@fluxnic.net>

arch/arm/mach-dove/Kconfig

@@ -9,6 +9,12 @@ config MACH_DOVE_DB
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell DB-MV88AP510 Development Board.
 
+ config MACH_CM_A510
+	bool "CompuLab CM-A510 Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  CompuLab CM-A510 Board.
+
 endmenu
 
 endif

arch/arm/mach-dove/Makefile

 obj-y				+= common.o addr-map.o irq.o pcie.o
 
 obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
+obj-$(CONFIG_MACH_CM_A510)	+= cm-a510.o

arch/arm/mach-dove/cm-a510.c

+/*
+ * arch/arm/mach-dove/cm-a510.c
+ *
+ * Copyright (C) 2010 CompuLab, Ltd.
+ * Konstantin Sinyuk <kostyas@compulab.co.il>
+ *
+ * Based on Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/flash.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/dove.h>
+
+#include "common.h"
+
+static struct mv643xx_eth_platform_data cm_a510_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data cm_a510_sata_data = {
+	.n_ports        = 1,
+};
+
+/*
+ * SPI Devices:
+ * SPI0: 1M Flash Winbond w25q32bv
+ */
+static const struct flash_platform_data cm_a510_spi_flash_data = {
+	.type		= "w25q32bv",
+};
+
+static struct spi_board_info __initdata cm_a510_spi_flash_info[] = {
+	{
+		.modalias       = "m25p80",
+		.platform_data  = &cm_a510_spi_flash_data,
+		.irq            = -1,
+		.max_speed_hz   = 20000000,
+		.bus_num        = 0,
+		.chip_select    = 0,
+	},
+};
+
+static int __init cm_a510_pci_init(void)
+{
+	if (machine_is_cm_a510())
+		dove_pcie_init(1, 1);
+
+	return 0;
+}
+
+subsys_initcall(cm_a510_pci_init);
+
+/* Board Init */
+static void __init cm_a510_init(void)
+{
+	/*
+	 * Basic Dove setup. Needs to be called early.
+	 */
+	dove_init();
+
+	dove_ge00_init(&cm_a510_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_sata_init(&cm_a510_sata_data);
+	dove_sdio0_init();
+	dove_sdio1_init();
+	dove_spi0_init();
+	dove_spi1_init();
+	dove_uart0_init();
+	dove_uart1_init();
+	dove_i2c_init();
+	spi_register_board_info(cm_a510_spi_flash_info,
+				ARRAY_SIZE(cm_a510_spi_flash_info));
+}
+
+MACHINE_START(CM_A510, "Compulab CM-A510 Board")
+	.boot_params	= 0x00000100,
+	.init_machine	= cm_a510_init,
+	.map_io		= dove_map_io,
+	.init_irq	= dove_init_irq,
+	.timer		= &dove_timer,
+MACHINE_END