ARM: dts: am57xx-idk: Move common MMC/SD properties to common file

AM572x IDK and AM571x IDK boards have equivalent
design of how SD card and eMMC are connected.

The two EVMs mainly differ in IOdelay configuration
needed (because of difference in SoC used).

Move the common properties to am57xx-idk-common.dtsi
file which is common for both EVMs.
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NTony Lindgren <tony@atomide.com>

arch/arm/boot/dts/am571x-idk.dts

@@ -64,13 +64,6 @@
 	};
 };
 
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
 &omap_dwc3_2 {
 	extcon = <&extcon_usb2>;
 };

arch/arm/boot/dts/am572x-idk.dts

@@ -76,14 +76,6 @@
 	vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
 };
 
-&mmc1 {
-	status = "okay";
-	vmmc-supply = <&v3_3d>;
-	vqmmc-supply = <&ldo1_reg>;
-	bus-width = <4>;
-	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
-};
-
 &sn65hvs882 {
 	load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
 };

arch/arm/boot/dts/am57xx-idk-common.dtsi

@@ -399,6 +399,14 @@
 	dr_mode = "peripheral";
 };
 
+&mmc1 {
+	status = "okay";
+	vmmc-supply = <&v3_3d>;
+	vqmmc-supply = <&ldo1_reg>;
+	bus-width = <4>;
+	cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
+};
+
 &mmc2 {
 	status = "okay";
 	vmmc-supply = <&v3_3d>;