Skip to content

K
kernel_linux

OpenHarmony / kernel_linux
上一次同步 接近 4 年

通知 13
Star 8
Fork 2
K
kernel_linux
提交 78ca90ea 编写于 作者: J Joe Perches 提交者： David S. Miller
浏览文件
操作

drivers/net/myri10ge: Use pr_<level> and netdev_<level> 

Add #define pr_fmt(fmt)
Convert logging messages to pr_<level> and netdev_<level>
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 c1f51212
隐藏空白更改
内联 并排
Showing with 67 addition and 116 deletion
drivers/net/myri10ge/myri10ge.c
浏览文件 @ 78ca90ea
......@@ -38,6 +38,8 @@
* Myricom, Inc., 325N Santa Anita Avenue, Arcadia, CA 91006
*************************************************************************/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/tcp.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
......@@ -819,9 +821,7 @@ static int myri10ge_change_pause(struct myri10ge_priv *mgp, int pause)
status = myri10ge_send_cmd(mgp, ctl, &cmd, 0);
if (status) {
printk(KERN_ERR
"myri10ge: %s: Failed to set flow control mode\n",
mgp->dev->name);
netdev_err(mgp->dev, "Failed to set flow control mode\n");
return status;
}
mgp->pause = pause;
......@@ -837,8 +837,7 @@ myri10ge_change_promisc(struct myri10ge_priv *mgp, int promisc, int atomic)
ctl = promisc ? MXGEFW_ENABLE_PROMISC : MXGEFW_DISABLE_PROMISC;
status = myri10ge_send_cmd(mgp, ctl, &cmd, atomic);
if (status)
printk(KERN_ERR "myri10ge: %s: Failed to set promisc mode\n",
mgp->dev->name);
netdev_err(mgp->dev, "Failed to set promisc mode\n");
}
static int myri10ge_dma_test(struct myri10ge_priv *mgp, int test_type)
......@@ -1482,19 +1481,15 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
if (mgp->link_state == MXGEFW_LINK_UP) {
if (netif_msg_link(mgp))
printk(KERN_INFO
"myri10ge: %s: link up\n",
mgp->dev->name);
netdev_info(mgp->dev, "link up\n");
netif_carrier_on(mgp->dev);
mgp->link_changes++;
} else {
if (netif_msg_link(mgp))
printk(KERN_INFO
"myri10ge: %s: link %s\n",
mgp->dev->name,
(link_up == MXGEFW_LINK_MYRINET ?
"mismatch (Myrinet detected)" :
"down"));
netdev_info(mgp->dev, "link %s\n",
link_up == MXGEFW_LINK_MYRINET ?
"mismatch (Myrinet detected)" :
"down");
netif_carrier_off(mgp->dev);
mgp->link_changes++;
}
......@@ -1503,9 +1498,8 @@ static inline void myri10ge_check_statblock(struct myri10ge_priv *mgp)
ntohl(stats->rdma_tags_available)) {
mgp->rdma_tags_available =
ntohl(stats->rdma_tags_available);
printk(KERN_WARNING "myri10ge: %s: RDMA timed out! "
"%d tags left\n", mgp->dev->name,
mgp->rdma_tags_available);
netdev_warn(mgp->dev, "RDMA timed out! %d tags left\n",
mgp->rdma_tags_available);
}
mgp->down_cnt += stats->link_down;
if (stats->link_down)
......@@ -1576,8 +1570,7 @@ static irqreturn_t myri10ge_intr(int irq, void *arg)
if (send_done_count != tx->pkt_done)
myri10ge_tx_done(ss, (int)send_done_count);
if (unlikely(i > myri10ge_max_irq_loops)) {
printk(KERN_WARNING "myri10ge: %s: irq stuck?\n",
mgp->dev->name);
netdev_err(mgp->dev, "irq stuck?\n");
stats->valid = 0;
schedule_work(&mgp->watchdog_work);
}
......@@ -1614,16 +1607,14 @@ myri10ge_get_settings(struct net_device *netdev, struct ethtool_cmd *cmd)
*/
ptr = mgp->product_code_string;
if (ptr == NULL) {
printk(KERN_ERR "myri10ge: %s: Missing product code\n",
netdev->name);
netdev_err(netdev, "Missing product code\n");
return 0;
}
for (i = 0; i < 3; i++, ptr++) {
ptr = strchr(ptr, '-');
if (ptr == NULL) {
printk(KERN_ERR "myri10ge: %s: Invalid product "
"code %s\n", netdev->name,
mgp->product_code_string);
netdev_err(netdev, "Invalid product code %s\n",
mgp->product_code_string);
return 0;
}
}
......@@ -2009,17 +2000,15 @@ static int myri10ge_allocate_rings(struct myri10ge_slice_state *ss)
mgp->small_bytes + MXGEFW_PAD, 0);
if (ss->rx_small.fill_cnt < ss->rx_small.mask + 1) {
printk(KERN_ERR
"myri10ge: %s:slice-%d: alloced only %d small bufs\n",
dev->name, slice, ss->rx_small.fill_cnt);
netdev_err(dev, "slice-%d: alloced only %d small bufs\n",
slice, ss->rx_small.fill_cnt);
goto abort_with_rx_small_ring;
}
myri10ge_alloc_rx_pages(mgp, &ss->rx_big, mgp->big_bytes, 0);
if (ss->rx_big.fill_cnt < ss->rx_big.mask + 1) {
printk(KERN_ERR
"myri10ge: %s:slice-%d: alloced only %d big bufs\n",
dev->name, slice, ss->rx_big.fill_cnt);
netdev_err(dev, "slice-%d: alloced only %d big bufs\n",
slice, ss->rx_big.fill_cnt);
goto abort_with_rx_big_ring;
}
......@@ -2358,7 +2347,7 @@ static int myri10ge_open(struct net_device *dev)
mgp->running = MYRI10GE_ETH_STARTING;
status = myri10ge_reset(mgp);
if (status != 0) {
printk(KERN_ERR "myri10ge: %s: failed reset\n", dev->name);
netdev_err(dev, "failed reset\n");
goto abort_with_nothing;
}
......@@ -2370,9 +2359,7 @@ static int myri10ge_open(struct net_device *dev)
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ENABLE_RSS_QUEUES,
&cmd, 0);
if (status != 0) {
printk(KERN_ERR
"myri10ge: %s: failed to set number of slices\n",
dev->name);
netdev_err(dev, "failed to set number of slices\n");
goto abort_with_nothing;
}
/* setup the indirection table */
......@@ -2384,9 +2371,7 @@ static int myri10ge_open(struct net_device *dev)
MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
&cmd, 0);
if (status != 0) {
printk(KERN_ERR
"myri10ge: %s: failed to setup rss tables\n",
dev->name);
netdev_err(dev, "failed to setup rss tables\n");
goto abort_with_nothing;
}
......@@ -2400,9 +2385,7 @@ static int myri10ge_open(struct net_device *dev)
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_RSS_ENABLE,
&cmd, 0);
if (status != 0) {
printk(KERN_ERR
"myri10ge: %s: failed to enable slices\n",
dev->name);
netdev_err(dev, "failed to enable slices\n");
goto abort_with_nothing;
}
}
......@@ -2450,9 +2433,7 @@ static int myri10ge_open(struct net_device *dev)
status = myri10ge_get_txrx(mgp, slice);
if (status != 0) {
printk(KERN_ERR
"myri10ge: %s: failed to get ring sizes or locations\n",
dev->name);
netdev_err(dev, "failed to get ring sizes or locations\n");
goto abort_with_rings;
}
status = myri10ge_allocate_rings(ss);
......@@ -2465,9 +2446,7 @@ static int myri10ge_open(struct net_device *dev)
if (slice == 0 || mgp->dev->real_num_tx_queues > 1)
status = myri10ge_set_stats(mgp, slice);
if (status) {
printk(KERN_ERR
"myri10ge: %s: Couldn't set stats DMA\n",
dev->name);
netdev_err(dev, "Couldn't set stats DMA\n");
goto abort_with_rings;
}
......@@ -2498,8 +2477,7 @@ static int myri10ge_open(struct net_device *dev)
status |=
myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd, 0);
if (status) {
printk(KERN_ERR "myri10ge: %s: Couldn't set buffer sizes\n",
dev->name);
netdev_err(dev, "Couldn't set buffer sizes\n");
goto abort_with_rings;
}
......@@ -2511,8 +2489,7 @@ static int myri10ge_open(struct net_device *dev)
cmd.data0 = 0;
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_SET_TSO_MODE, &cmd, 0);
if (status && status != -ENOSYS) {
printk(KERN_ERR "myri10ge: %s: Couldn't set TSO mode\n",
dev->name);
netdev_err(dev, "Couldn't set TSO mode\n");
goto abort_with_rings;
}
......@@ -2521,8 +2498,7 @@ static int myri10ge_open(struct net_device *dev)
status = myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_UP, &cmd, 0);
if (status) {
printk(KERN_ERR "myri10ge: %s: Couldn't bring up link\n",
dev->name);
netdev_err(dev, "Couldn't bring up link\n");
goto abort_with_rings;
}
......@@ -2575,15 +2551,12 @@ static int myri10ge_close(struct net_device *dev)
status =
myri10ge_send_cmd(mgp, MXGEFW_CMD_ETHERNET_DOWN, &cmd, 0);
if (status)
printk(KERN_ERR
"myri10ge: %s: Couldn't bring down link\n",
dev->name);
netdev_err(dev, "Couldn't bring down link\n");
wait_event_timeout(mgp->down_wq, old_down_cnt != mgp->down_cnt,
HZ);
if (old_down_cnt == mgp->down_cnt)
printk(KERN_ERR "myri10ge: %s never got down irq\n",
dev->name);
netdev_err(dev, "never got down irq\n");
}
netif_tx_disable(dev);
myri10ge_free_irq(mgp);
......@@ -2944,9 +2917,7 @@ static netdev_tx_t myri10ge_xmit(struct sk_buff *skb,
idx = (idx + 1) & tx->mask;
} while (idx != last_idx);
if (skb_is_gso(skb)) {
printk(KERN_ERR
"myri10ge: %s: TSO but wanted to linearize?!?!?\n",
mgp->dev->name);
netdev_err(mgp->dev, "TSO but wanted to linearize?!?!?\n");
goto drop;
}
......@@ -3043,8 +3014,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
err = myri10ge_send_cmd(mgp, MXGEFW_ENABLE_ALLMULTI, &cmd, 1);
if (err != 0) {
printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_ENABLE_ALLMULTI,"
" error status: %d\n", dev->name, err);
netdev_err(dev, "Failed MXGEFW_ENABLE_ALLMULTI, error status: %d\n",
err);
goto abort;
}
......@@ -3058,9 +3029,8 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
err = myri10ge_send_cmd(mgp, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
&cmd, 1);
if (err != 0) {
printk(KERN_ERR
"myri10ge: %s: Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
", error status: %d\n", dev->name, err);
netdev_err(dev, "Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, error status: %d\n",
err);
goto abort;
}
......@@ -3073,18 +3043,16 @@ static void myri10ge_set_multicast_list(struct net_device *dev)
&cmd, 1);
if (err != 0) {
printk(KERN_ERR "myri10ge: %s: Failed "
"MXGEFW_JOIN_MULTICAST_GROUP, error status:"
"%d\t", dev->name, err);
printk(KERN_ERR "MAC %pM\n", mc_list->dmi_addr);
netdev_err(dev, "Failed MXGEFW_JOIN_MULTICAST_GROUP, error status:%d %pM\n",
err, mc_list->dmi_addr);
goto abort;
}
}
/* Enable multicast filtering */
err = myri10ge_send_cmd(mgp, MXGEFW_DISABLE_ALLMULTI, &cmd, 1);
if (err != 0) {
printk(KERN_ERR "myri10ge: %s: Failed MXGEFW_DISABLE_ALLMULTI,"
"error status: %d\n", dev->name, err);
netdev_err(dev, "Failed MXGEFW_DISABLE_ALLMULTI, error status: %d\n",
err);
goto abort;
}
......@@ -3105,9 +3073,8 @@ static int myri10ge_set_mac_address(struct net_device *dev, void *addr)
status = myri10ge_update_mac_address(mgp, sa->sa_data);
if (status != 0) {
printk(KERN_ERR
"myri10ge: %s: changing mac address failed with %d\n",
dev->name, status);
netdev_err(dev, "changing mac address failed with %d\n",
status);
return status;
}
......@@ -3122,12 +3089,10 @@ static int myri10ge_change_mtu(struct net_device *dev, int new_mtu)
int error = 0;
if ((new_mtu < 68) || (ETH_HLEN + new_mtu > MYRI10GE_MAX_ETHER_MTU)) {
printk(KERN_ERR "myri10ge: %s: new mtu (%d) is not valid\n",
dev->name, new_mtu);
netdev_err(dev, "new mtu (%d) is not valid\n", new_mtu);
return -EINVAL;
}
printk(KERN_INFO "%s: changing mtu from %d to %d\n",
dev->name, dev->mtu, new_mtu);
netdev_info(dev, "changing mtu from %d to %d\n", dev->mtu, new_mtu);
if (mgp->running) {
/* if we change the mtu on an active device, we must
* reset the device so the firmware sees the change */
......@@ -3356,7 +3321,7 @@ static int myri10ge_suspend(struct pci_dev *pdev, pm_message_t state)
netif_device_detach(netdev);
if (netif_running(netdev)) {
printk(KERN_INFO "myri10ge: closing %s\n", netdev->name);
netdev_info(netdev, "closing\n");
rtnl_lock();
myri10ge_close(netdev);
rtnl_unlock();
......@@ -3383,8 +3348,7 @@ static int myri10ge_resume(struct pci_dev *pdev)
msleep(5); /* give card time to respond */
pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
if (vendor == 0xffff) {
printk(KERN_ERR "myri10ge: %s: device disappeared!\n",
mgp->dev->name);
netdev_err(mgp->dev, "device disappeared!\n");
return -EIO;
}
......@@ -3463,10 +3427,9 @@ static void myri10ge_watchdog(struct work_struct *work)
* if the card rebooted due to a parity error
* For now, just report it */
reboot = myri10ge_read_reboot(mgp);
printk(KERN_ERR
"myri10ge: %s: NIC rebooted (0x%x),%s resetting\n",
mgp->dev->name, reboot,
myri10ge_reset_recover ? " " : " not");
netdev_err(mgp->dev, "NIC rebooted (0x%x),%s resetting\n",
reboot,
myri10ge_reset_recover ? "" : " not");
if (myri10ge_reset_recover == 0)
return;
rtnl_lock();
......@@ -3494,31 +3457,26 @@ static void myri10ge_watchdog(struct work_struct *work)
if (cmd == 0xffff) {
pci_read_config_word(mgp->pdev, PCI_VENDOR_ID, &vendor);
if (vendor == 0xffff) {
printk(KERN_ERR
"myri10ge: %s: device disappeared!\n",
mgp->dev->name);
netdev_err(mgp->dev, "device disappeared!\n");
return;
}
}
/* Perhaps it is a software error. Try to reset */
printk(KERN_ERR "myri10ge: %s: device timeout, resetting\n",
mgp->dev->name);
netdev_err(mgp->dev, "device timeout, resetting\n");
for (i = 0; i < mgp->num_slices; i++) {
tx = &mgp->ss[i].tx;
printk(KERN_INFO
"myri10ge: %s: (%d): %d %d %d %d %d %d\n",
mgp->dev->name, i, tx->queue_active, tx->req,
tx->done, tx->pkt_start, tx->pkt_done,
(int)ntohl(mgp->ss[i].fw_stats->
send_done_count));
netdev_err(mgp->dev, "(%d): %d %d %d %d %d %d\n",
i, tx->queue_active, tx->req,
tx->done, tx->pkt_start, tx->pkt_done,
(int)ntohl(mgp->ss[i].fw_stats->
send_done_count));
msleep(2000);
printk(KERN_INFO
"myri10ge: %s: (%d): %d %d %d %d %d %d\n",
mgp->dev->name, i, tx->queue_active, tx->req,
tx->done, tx->pkt_start, tx->pkt_done,
(int)ntohl(mgp->ss[i].fw_stats->
send_done_count));
netdev_info(mgp->dev, "(%d): %d %d %d %d %d %d\n",
i, tx->queue_active, tx->req,
tx->done, tx->pkt_start, tx->pkt_done,
(int)ntohl(mgp->ss[i].fw_stats->
send_done_count));
}
}
......@@ -3528,8 +3486,7 @@ static void myri10ge_watchdog(struct work_struct *work)
}
status = myri10ge_load_firmware(mgp, 1);
if (status != 0)
printk(KERN_ERR "myri10ge: %s: failed to load firmware\n",
mgp->dev->name);
netdev_err(mgp->dev, "failed to load firmware\n");
else
myri10ge_open(mgp->dev);
rtnl_unlock();
......@@ -3580,14 +3537,10 @@ static void myri10ge_watchdog_timer(unsigned long arg)
/* nic seems like it might be stuck.. */
if (rx_pause_cnt != mgp->watchdog_pause) {
if (net_ratelimit())
printk(KERN_WARNING
"myri10ge %s slice %d:"
"TX paused, check link partner\n",
mgp->dev->name, i);
netdev_err(mgp->dev, "slice %d: TX paused, check link partner\n",
i);
} else {
printk(KERN_WARNING
"myri10ge %s slice %d stuck:",
mgp->dev->name, i);
netdev_warn(mgp->dev, "slice %d stuck:", i);
reset_needed = 1;
}
}
......@@ -4127,13 +4080,11 @@ static struct notifier_block myri10ge_dca_notifier = {
static __init int myri10ge_init_module(void)
{
printk(KERN_INFO "%s: Version %s\n", myri10ge_driver.name,
MYRI10GE_VERSION_STR);
pr_info("Version %s\n", MYRI10GE_VERSION_STR);
if (myri10ge_rss_hash > MXGEFW_RSS_HASH_TYPE_MAX) {
printk(KERN_ERR
"%s: Illegal rssh hash type %d, defaulting to source port\n",
myri10ge_driver.name, myri10ge_rss_hash);
pr_err("Illegal rssh hash type %d, defaulting to source port\n",
myri10ge_rss_hash);
myri10ge_rss_hash = MXGEFW_RSS_HASH_TYPE_SRC_PORT;
}
#ifdef CONFIG_MYRI10GE_DCA
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或