Merge tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

 "A series of fixes for the media subsytem:

   - The largest amount of fixes in this series is with regards to
     comments that aren't kernel-doc, but start with "/**".

     A new check added for 4.15 makes it to produce a *huge* amount of
     new warnings (I'm compiling here with W=1). Most of the patches in
     this series fix those.

     No code changes - just comment changes at the source files

   - rc: some fixed in order to better handle RC repetition codes

   - v4l-async: use the v4l2_dev from the root notifier when matching
     sub-devices

   - v4l2-fwnode: Check subdev count after checking port

   - ov 13858 and et8ek8: compilation fix with randconfigs

   - usbtv: a trivial new USB ID addition

   - dibusb-common: don't do DMA on stack on firmware load

   - imx274: Fix error handling, add MAINTAINERS entry

   - sir_ir: detect presence of port"

* tag 'media/v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (50 commits)
  media: imx274: Fix error handling, add MAINTAINERS entry
  media: v4l: async: use the v4l2_dev from the root notifier when matching sub-devices
  media: v4l2-fwnode: Check subdev count after checking port
  media: et8ek8: select V4L2_FWNODE
  media: ov13858: Select V4L2_FWNODE
  media: rc: partial revert of "media: rc: per-protocol repeat period"
  media: dvb: i2c transfers over usb cannot be done from stack
  media: dvb-frontends: complete kernel-doc markups
  media: docs: add documentation for frontend attach info
  media: dvb_frontends: fix kernel-doc macros
  media: drivers: remove "/**" from non-kernel-doc comments
  media: lm3560: add a missing kernel-doc parameter
  media: rcar_jpu: fix two kernel-doc markups
  media: vsp1: add a missing kernel-doc parameter
  media: soc_camera: fix a kernel-doc markup
  media: mt2063: fix some kernel-doc warnings
  media: radio-wl1273: fix a parameter name at kernel-doc macro
  media: s3c-camif: add missing description at s3c_camif_find_format()
  media: mtk-vpu: add description for wdt fields at struct mtk_vpu
  media: vdec: fix some kernel-doc warnings
  ...

Documentation/media/dvb-drivers/frontends.rst

+****************
+Frontend drivers
+****************
+
+Frontend attach headers
+***********************
+
+.. Keep it on alphabetic order
+
+.. kernel-doc:: drivers/media/dvb-frontends/a8293.h
+.. kernel-doc:: drivers/media/dvb-frontends/af9013.h
+.. kernel-doc:: drivers/media/dvb-frontends/ascot2e.h
+.. kernel-doc:: drivers/media/dvb-frontends/cxd2820r.h
+.. kernel-doc:: drivers/media/dvb-frontends/drxk.h
+.. kernel-doc:: drivers/media/dvb-frontends/dvb-pll.h
+.. kernel-doc:: drivers/media/dvb-frontends/helene.h
+.. kernel-doc:: drivers/media/dvb-frontends/horus3a.h
+.. kernel-doc:: drivers/media/dvb-frontends/ix2505v.h
+.. kernel-doc:: drivers/media/dvb-frontends/m88ds3103.h
+.. kernel-doc:: drivers/media/dvb-frontends/mb86a20s.h
+.. kernel-doc:: drivers/media/dvb-frontends/mn88472.h
+.. kernel-doc:: drivers/media/dvb-frontends/rtl2830.h
+.. kernel-doc:: drivers/media/dvb-frontends/rtl2832.h
+.. kernel-doc:: drivers/media/dvb-frontends/rtl2832_sdr.h
+.. kernel-doc:: drivers/media/dvb-frontends/stb6000.h
+.. kernel-doc:: drivers/media/dvb-frontends/tda10071.h
+.. kernel-doc:: drivers/media/dvb-frontends/tda826x.h
+.. kernel-doc:: drivers/media/dvb-frontends/zd1301_demod.h
+.. kernel-doc:: drivers/media/dvb-frontends/zl10036.h
+

Documentation/media/dvb-drivers/index.rst

@@ -41,4 +41,5 @@ For more details see the file COPYING in the source distribution of Linux.
 	technisat
 	ttusb-dec
 	udev
+	frontends
 	contributors

MAINTAINERS

@@ -12643,6 +12643,14 @@ S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
 
+SONY IMX274 SENSOR DRIVER
+M:	Leon Luo <leonl@leopardimaging.com>
+L:	linux-media@vger.kernel.org
+T:	git git://linuxtv.org/media_tree.git
+S:	Maintained
+F:	drivers/media/i2c/imx274.c
+F:	Documentation/devicetree/bindings/media/i2c/imx274.txt
+
 SONY MEMORYSTICK CARD SUPPORT
 M:	Alex Dubov <oakad@yahoo.com>
 W:	http://tifmxx.berlios.de/

drivers/media/common/siano/smscoreapi.c

@@ -521,13 +521,13 @@ static void list_add_locked(struct list_head *new, struct list_head *head,
 	spin_unlock_irqrestore(lock, flags);
 }
 
-/**
+/*
  * register a client callback that called when device plugged in/unplugged
  * NOTE: if devices exist callback is called immediately for each device
  *
  * @param hotplug callback
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 int smscore_register_hotplug(hotplug_t hotplug)
 {
@@ -562,7 +562,7 @@ int smscore_register_hotplug(hotplug_t hotplug)
 }
 EXPORT_SYMBOL_GPL(smscore_register_hotplug);
 
-/**
+/*
  * unregister a client callback that called when device plugged in/unplugged
  *
  * @param hotplug callback
@@ -636,7 +636,7 @@ smscore_buffer_t *smscore_createbuffer(u8 *buffer, void *common_buffer,
 	return cb;
 }
 
-/**
+/*
  * creates coredev object for a device, prepares buffers,
  * creates buffer mappings, notifies registered hotplugs about new device.
  *
@@ -644,7 +644,7 @@ smscore_buffer_t *smscore_createbuffer(u8 *buffer, void *common_buffer,
  *               and handlers
  * @param coredev pointer to a value that receives created coredev object
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 int smscore_register_device(struct smsdevice_params_t *params,
 			    struct smscore_device_t **coredev,
@@ -764,10 +764,10 @@ static int smscore_sendrequest_and_wait(struct smscore_device_t *coredev,
 			0 : -ETIME;
 }
 
-/**
+/*
  * Starts & enables IR operations
  *
- * @return 0 on success, < 0 on error.
+ * return: 0 on success, < 0 on error.
  */
 static int smscore_init_ir(struct smscore_device_t *coredev)
 {
@@ -812,13 +812,13 @@ static int smscore_init_ir(struct smscore_device_t *coredev)
 	return 0;
 }
 
-/**
+/*
  * configures device features according to board configuration structure.
  *
  * @param coredev pointer to a coredev object returned by
  *                smscore_register_device
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 static int smscore_configure_board(struct smscore_device_t *coredev)
 {
@@ -861,13 +861,13 @@ static int smscore_configure_board(struct smscore_device_t *coredev)
 	return 0;
 }
 
-/**
+/*
  * sets initial device mode and notifies client hotplugs that device is ready
  *
  * @param coredev pointer to a coredev object returned by
  *		  smscore_register_device
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 int smscore_start_device(struct smscore_device_t *coredev)
 {
@@ -1087,7 +1087,7 @@ static char *smscore_fw_lkup[][DEVICE_MODE_MAX] = {
 	},
 };
 
-/**
+/*
  * get firmware file name from one of the two mechanisms : sms_boards or
  * smscore_fw_lkup.
  * @param coredev pointer to a coredev object returned by
@@ -1096,7 +1096,7 @@ static char *smscore_fw_lkup[][DEVICE_MODE_MAX] = {
  * @param lookup if 1, always get the fw filename from smscore_fw_lkup
  *	 table. if 0, try first to get from sms_boards
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 static char *smscore_get_fw_filename(struct smscore_device_t *coredev,
 			      int mode)
@@ -1125,7 +1125,7 @@ static char *smscore_get_fw_filename(struct smscore_device_t *coredev,
 	return fw[mode];
 }
 
-/**
+/*
  * loads specified firmware into a buffer and calls device loadfirmware_handler
  *
  * @param coredev pointer to a coredev object returned by
@@ -1133,7 +1133,7 @@ static char *smscore_get_fw_filename(struct smscore_device_t *coredev,
  * @param filename null-terminated string specifies firmware file name
  * @param loadfirmware_handler device handler that loads firmware
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 static int smscore_load_firmware_from_file(struct smscore_device_t *coredev,
 					   int mode,
@@ -1182,14 +1182,14 @@ static int smscore_load_firmware_from_file(struct smscore_device_t *coredev,
 	return rc;
 }
 
-/**
+/*
  * notifies all clients registered with the device, notifies hotplugs,
  * frees all buffers and coredev object
  *
  * @param coredev pointer to a coredev object returned by
  *                smscore_register_device
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 void smscore_unregister_device(struct smscore_device_t *coredev)
 {
@@ -1282,14 +1282,14 @@ static int smscore_detect_mode(struct smscore_device_t *coredev)
 	return rc;
 }
 
-/**
+/*
  * send init device request and wait for response
  *
  * @param coredev pointer to a coredev object returned by
  *                smscore_register_device
  * @param mode requested mode of operation
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 static int smscore_init_device(struct smscore_device_t *coredev, int mode)
 {
@@ -1315,7 +1315,7 @@ static int smscore_init_device(struct smscore_device_t *coredev, int mode)
 	return rc;
 }
 
-/**
+/*
  * calls device handler to change mode of operation
  * NOTE: stellar/usb may disconnect when changing mode
  *
@@ -1323,7 +1323,7 @@ static int smscore_init_device(struct smscore_device_t *coredev, int mode)
  *                smscore_register_device
  * @param mode requested mode of operation
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
 {
@@ -1411,13 +1411,13 @@ int smscore_set_device_mode(struct smscore_device_t *coredev, int mode)
 	return rc;
 }
 
-/**
+/*
  * calls device handler to get current mode of operation
  *
  * @param coredev pointer to a coredev object returned by
  *                smscore_register_device
  *
- * @return current mode
+ * return: current mode
  */
 int smscore_get_device_mode(struct smscore_device_t *coredev)
 {
@@ -1425,7 +1425,7 @@ int smscore_get_device_mode(struct smscore_device_t *coredev)
 }
 EXPORT_SYMBOL_GPL(smscore_get_device_mode);
 
-/**
+/*
  * find client by response id & type within the clients list.
  * return client handle or NULL.
  *
@@ -1462,7 +1462,7 @@ smscore_client_t *smscore_find_client(struct smscore_device_t *coredev,
 	return client;
 }
 
-/**
+/*
  * find client by response id/type, call clients onresponse handler
  * return buffer to pool on error
  *
@@ -1615,13 +1615,13 @@ void smscore_onresponse(struct smscore_device_t *coredev,
 }
 EXPORT_SYMBOL_GPL(smscore_onresponse);
 
-/**
+/*
  * return pointer to next free buffer descriptor from core pool
  *
  * @param coredev pointer to a coredev object returned by
  *                smscore_register_device
  *
- * @return pointer to descriptor on success, NULL on error.
+ * return: pointer to descriptor on success, NULL on error.
  */
 
 static struct smscore_buffer_t *get_entry(struct smscore_device_t *coredev)
@@ -1648,7 +1648,7 @@ struct smscore_buffer_t *smscore_getbuffer(struct smscore_device_t *coredev)
 }
 EXPORT_SYMBOL_GPL(smscore_getbuffer);
 
-/**
+/*
  * return buffer descriptor to a pool
  *
  * @param coredev pointer to a coredev object returned by
@@ -1693,7 +1693,7 @@ static int smscore_validate_client(struct smscore_device_t *coredev,
 	return 0;
 }
 
-/**
+/*
  * creates smsclient object, check that id is taken by another client
  *
  * @param coredev pointer to a coredev object from clients hotplug
@@ -1705,7 +1705,7 @@ static int smscore_validate_client(struct smscore_device_t *coredev,
  * @param context client-specific context
  * @param client pointer to a value that receives created smsclient object
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 int smscore_register_client(struct smscore_device_t *coredev,
 			    struct smsclient_params_t *params,
@@ -1740,7 +1740,7 @@ int smscore_register_client(struct smscore_device_t *coredev,
 }
 EXPORT_SYMBOL_GPL(smscore_register_client);
 
-/**
+/*
  * frees smsclient object and all subclients associated with it
  *
  * @param client pointer to smsclient object returned by
@@ -1771,7 +1771,7 @@ void smscore_unregister_client(struct smscore_client_t *client)
 }
 EXPORT_SYMBOL_GPL(smscore_unregister_client);
 
-/**
+/*
  * verifies that source id is not taken by another client,
  * calls device handler to send requests to the device
  *
@@ -1780,7 +1780,7 @@ EXPORT_SYMBOL_GPL(smscore_unregister_client);
  * @param buffer pointer to a request buffer
  * @param size size (in bytes) of request buffer
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 int smsclient_sendrequest(struct smscore_client_t *client,
 			  void *buffer, size_t size)

drivers/media/dvb-core/dvb_ca_en50221.c

@@ -206,7 +206,7 @@ static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
  * @hlen: Number of bytes in haystack.
  * @needle: Buffer to find.
  * @nlen: Number of bytes in needle.
- * @return Pointer into haystack needle was found at, or NULL if not found.
+ * return: Pointer into haystack needle was found at, or NULL if not found.
  */
 static char *findstr(char *haystack, int hlen, char *needle, int nlen)
 {
@@ -226,7 +226,7 @@ static char *findstr(char *haystack, int hlen, char *needle, int nlen)
 /* ************************************************************************** */
 /* EN50221 physical interface functions */
 
-/**
+/*
  * dvb_ca_en50221_check_camstatus - Check CAM status.
  */
 static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot)
@@ -275,9 +275,9 @@ static int dvb_ca_en50221_check_camstatus(struct dvb_ca_private *ca, int slot)
  * @ca: CA instance.
  * @slot: Slot on interface.
  * @waitfor: Flags to wait for.
- * @timeout_ms: Timeout in milliseconds.
+ * @timeout_hz: Timeout in milliseconds.
  *
- * @return 0 on success, nonzero on error.
+ * return: 0 on success, nonzero on error.
  */
 static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot,
 					 u8 waitfor, int timeout_hz)
@@ -325,7 +325,7 @@ static int dvb_ca_en50221_wait_if_status(struct dvb_ca_private *ca, int slot,
  * @ca: CA instance.
  * @slot: Slot id.
  *
- * @return 0 on success, nonzero on failure.
+ * return: 0 on success, nonzero on failure.
  */
 static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot)
 {
@@ -397,11 +397,11 @@ static int dvb_ca_en50221_link_init(struct dvb_ca_private *ca, int slot)
  * @ca: CA instance.
  * @slot: Slot id.
  * @address: Address to read from. Updated.
- * @tupleType: Tuple id byte. Updated.
- * @tupleLength: Tuple length. Updated.
+ * @tuple_type: Tuple id byte. Updated.
+ * @tuple_length: Tuple length. Updated.
  * @tuple: Dest buffer for tuple (must be 256 bytes). Updated.
  *
- * @return 0 on success, nonzero on error.
+ * return: 0 on success, nonzero on error.
  */
 static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot,
 				     int *address, int *tuple_type,
@@ -455,7 +455,7 @@ static int dvb_ca_en50221_read_tuple(struct dvb_ca_private *ca, int slot,
  * @ca: CA instance.
  * @slot: Slot id.
  *
- * @return 0 on success, <0 on failure.
+ * return: 0 on success, <0 on failure.
  */
 static int dvb_ca_en50221_parse_attributes(struct dvb_ca_private *ca, int slot)
 {
@@ -632,10 +632,11 @@ static int dvb_ca_en50221_set_configoption(struct dvb_ca_private *ca, int slot)
  * @ca: CA instance.
  * @slot: Slot to read from.
  * @ebuf: If non-NULL, the data will be written to this buffer. If NULL,
- * the data will be added into the buffering system as a normal fragment.
+ *	  the data will be added into the buffering system as a normal
+ *	  fragment.
  * @ecount: Size of ebuf. Ignored if ebuf is NULL.
  *
- * @return Number of bytes read, or < 0 on error
+ * return: Number of bytes read, or < 0 on error
  */
 static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot,
 				    u8 *ebuf, int ecount)
@@ -784,11 +785,11 @@ static int dvb_ca_en50221_read_data(struct dvb_ca_private *ca, int slot,
  *
  * @ca: CA instance.
  * @slot: Slot to write to.
- * @ebuf: The data in this buffer is treated as a complete link-level packet to
- * be written.
- * @count: Size of ebuf.
+ * @buf: The data in this buffer is treated as a complete link-level packet to
+ * 	 be written.
+ * @bytes_write: Size of ebuf.
  *
- * @return Number of bytes written, or < 0 on error.
+ * return: Number of bytes written, or < 0 on error.
  */
 static int dvb_ca_en50221_write_data(struct dvb_ca_private *ca, int slot,
 				     u8 *buf, int bytes_write)
@@ -933,7 +934,7 @@ static int dvb_ca_en50221_slot_shutdown(struct dvb_ca_private *ca, int slot)
 /**
  * dvb_ca_en50221_camchange_irq - A CAMCHANGE IRQ has occurred.
  *
- * @ca: CA instance.
+ * @pubca: CA instance.
  * @slot: Slot concerned.
  * @change_type: One of the DVB_CA_CAMCHANGE_* values.
  */
@@ -963,7 +964,7 @@ EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq);
 /**
  * dvb_ca_en50221_camready_irq - A CAMREADY IRQ has occurred.
  *
- * @ca: CA instance.
+ * @pubca: CA instance.
  * @slot: Slot concerned.
  */
 void dvb_ca_en50221_camready_irq(struct dvb_ca_en50221 *pubca, int slot)
@@ -983,7 +984,7 @@ EXPORT_SYMBOL(dvb_ca_en50221_camready_irq);
 /**
  * dvb_ca_en50221_frda_irq - An FR or DA IRQ has occurred.
  *
- * @ca: CA instance.
+ * @pubca: CA instance.
  * @slot: Slot concerned.
  */
 void dvb_ca_en50221_frda_irq(struct dvb_ca_en50221 *pubca, int slot)
@@ -1091,7 +1092,7 @@ static void dvb_ca_en50221_thread_update_delay(struct dvb_ca_private *ca)
  *
  * @ca: CA instance.
  * @slot: Slot to process.
- * @return: 0 .. no change
+ * return:: 0 .. no change
  *          1 .. CAM state changed
  */
 
@@ -1296,7 +1297,7 @@ static void dvb_ca_en50221_thread_state_machine(struct dvb_ca_private *ca,
 	mutex_unlock(&sl->slot_lock);
 }
 
-/**
+/*
  * Kernel thread which monitors CA slots for CAM changes, and performs data
  * transfers.
  */
@@ -1336,12 +1337,11 @@ static int dvb_ca_en50221_thread(void *data)
  * Real ioctl implementation.
  * NOTE: CA_SEND_MSG/CA_GET_MSG ioctls have userspace buffers passed to them.
  *
- * @inode: Inode concerned.
  * @file: File concerned.
  * @cmd: IOCTL command.
- * @arg: Associated argument.
+ * @parg: Associated argument.
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 static int dvb_ca_en50221_io_do_ioctl(struct file *file,
 				      unsigned int cmd, void *parg)
@@ -1420,12 +1420,11 @@ static int dvb_ca_en50221_io_do_ioctl(struct file *file,
 /**
  * Wrapper for ioctl implementation.
  *
- * @inode: Inode concerned.
  * @file: File concerned.
  * @cmd: IOCTL command.
  * @arg: Associated argument.
  *
- * @return 0 on success, <0 on error.
+ * return: 0 on success, <0 on error.
  */
 static long dvb_ca_en50221_io_ioctl(struct file *file,
 				    unsigned int cmd, unsigned long arg)
@@ -1441,7 +1440,7 @@ static long dvb_ca_en50221_io_ioctl(struct file *file,
  * @count: Size of source buffer.
  * @ppos: Position in file (ignored).
  *
- * @return Number of bytes read, or <0 on error.
+ * return: Number of bytes read, or <0 on error.
  */
 static ssize_t dvb_ca_en50221_io_write(struct file *file,
 				       const char __user *buf, size_t count,
@@ -1536,7 +1535,7 @@ static ssize_t dvb_ca_en50221_io_write(struct file *file,
 	return status;
 }
 
-/**
+/*
  * Condition for waking up in dvb_ca_en50221_io_read_condition
  */
 static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca,
@@ -1593,7 +1592,7 @@ static int dvb_ca_en50221_io_read_condition(struct dvb_ca_private *ca,
  * @count: Size of destination buffer.
  * @ppos: Position in file (ignored).
  *
- * @return Number of bytes read, or <0 on error.
+ * return: Number of bytes read, or <0 on error.
  */
 static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user *buf,
 				      size_t count, loff_t *ppos)
@@ -1702,7 +1701,7 @@ static ssize_t dvb_ca_en50221_io_read(struct file *file, char __user *buf,
  * @inode: Inode concerned.
  * @file: File concerned.
  *
- * @return 0 on success, <0 on failure.
+ * return: 0 on success, <0 on failure.
  */
 static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
 {
@@ -1752,7 +1751,7 @@ static int dvb_ca_en50221_io_open(struct inode *inode, struct file *file)
  * @inode: Inode concerned.
  * @file: File concerned.
  *
- * @return 0 on success, <0 on failure.
+ * return: 0 on success, <0 on failure.
  */
 static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
 {
@@ -1781,7 +1780,7 @@ static int dvb_ca_en50221_io_release(struct inode *inode, struct file *file)
  * @file: File concerned.
  * @wait: poll wait table.
  *
- * @return Standard poll mask.
+ * return: Standard poll mask.
  */
 static unsigned int dvb_ca_en50221_io_poll(struct file *file, poll_table *wait)
 {
@@ -1838,11 +1837,11 @@ static const struct dvb_device dvbdev_ca = {
  * Initialise a new DVB CA EN50221 interface device.
  *
  * @dvb_adapter: DVB adapter to attach the new CA device to.
- * @ca: The dvb_ca instance.
+ * @pubca: The dvb_ca instance.
  * @flags: Flags describing the CA device (DVB_CA_FLAG_*).
  * @slot_count: Number of slots supported.
  *
- * @return 0 on success, nonzero on failure
+ * return: 0 on success, nonzero on failure
  */
 int dvb_ca_en50221_init(struct dvb_adapter *dvb_adapter,
 			struct dvb_ca_en50221 *pubca, int flags, int slot_count)
@@ -1929,8 +1928,7 @@ EXPORT_SYMBOL(dvb_ca_en50221_init);
 /**
  * Release a DVB CA EN50221 interface device.
  *
- * @ca_dev: The dvb_device_t instance for the CA device.
- * @ca: The associated dvb_ca instance.
+ * @pubca: The associated dvb_ca instance.
  */
 void dvb_ca_en50221_release(struct dvb_ca_en50221 *pubca)
 {

drivers/media/dvb-core/dvb_frontend.c

@@ -369,11 +369,14 @@ static void dvb_frontend_swzigzag_update_delay(struct dvb_frontend_private *fepr
 }
 
 /**
- * Performs automatic twiddling of frontend parameters.
+ * dvb_frontend_swzigzag_autotune - Performs automatic twiddling of frontend
+ *	parameters.
  *
- * @param fe The frontend concerned.
- * @param check_wrapped Checks if an iteration has completed. DO NOT SET ON THE FIRST ATTEMPT
- * @returns Number of complete iterations that have been performed.
+ * @fe: The frontend concerned.
+ * @check_wrapped: Checks if an iteration has completed.
+ *		   DO NOT SET ON THE FIRST ATTEMPT.
+ *
+ * return: Number of complete iterations that have been performed.
  */
 static int dvb_frontend_swzigzag_autotune(struct dvb_frontend *fe, int check_wrapped)
 {
@@ -1253,7 +1256,7 @@ dtv_property_legacy_params_sync(struct dvb_frontend *fe,
  * dtv_get_frontend - calls a callback for retrieving DTV parameters
  * @fe:		struct dvb_frontend pointer
  * @c:		struct dtv_frontend_properties pointer (DVBv5 cache)
- * @p_out	struct dvb_frontend_parameters pointer (DVBv3 FE struct)
+ * @p_out:	struct dvb_frontend_parameters pointer (DVBv3 FE struct)
  *
  * This routine calls either the DVBv3 or DVBv5 get_frontend call.
  * If c is not null, it will update the DVBv5 cache struct pointed by it.

drivers/media/dvb-core/dvb_net.c

@@ -125,7 +125,7 @@ struct dvb_net_priv {
 };
 
 
-/**
+/*
  *	Determine the packet's protocol ID. The rule here is that we
  *	assume 802.3 if the type field is short enough to be a length.
  *	This is normal practice and works for any 'now in use' protocol.
@@ -155,7 +155,7 @@ static __be16 dvb_net_eth_type_trans(struct sk_buff *skb,
 
 	rawp = skb->data;
 
-	/**
+	/*
 	 *	This is a magic hack to spot IPX packets. Older Novell breaks
 	 *	the protocol design and runs IPX over 802.3 without an 802.2 LLC
 	 *	layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This
@@ -164,7 +164,7 @@ static __be16 dvb_net_eth_type_trans(struct sk_buff *skb,
 	if (*(unsigned short *)rawp == 0xFFFF)
 		return htons(ETH_P_802_3);
 
-	/**
+	/*
 	 *	Real 802.2 LLC
 	 */
 	return htons(ETH_P_802_2);
@@ -215,7 +215,8 @@ static int ule_exthdr_padding(struct dvb_net_priv *p)
 	return 0;
 }
 
-/** Handle ULE extension headers.
+/*
+ * Handle ULE extension headers.
  *  Function is called after a successful CRC32 verification of an ULE SNDU to complete its decoding.
  *  Returns: >= 0: nr. of bytes consumed by next extension header
  *	     -1:   Mandatory extension header that is not recognized or TEST SNDU; discard.
@@ -291,7 +292,7 @@ static int handle_ule_extensions( struct dvb_net_priv *p )
 }
 
 
-/** Prepare for a new ULE SNDU: reset the decoder state. */
+/* Prepare for a new ULE SNDU: reset the decoder state. */
 static inline void reset_ule( struct dvb_net_priv *p )
 {
 	p->ule_skb = NULL;
@@ -304,7 +305,7 @@ static inline void reset_ule( struct dvb_net_priv *p )
 	p->ule_bridged = 0;
 }
 
-/**
+/*
  * Decode ULE SNDUs according to draft-ietf-ipdvb-ule-03.txt from a sequence of
  * TS cells of a single PID.
  */
@@ -1005,7 +1006,7 @@ static int dvb_net_sec_callback(const u8 *buffer1, size_t buffer1_len,
 {
 	struct net_device *dev = filter->priv;
 
-	/**
+	/*
 	 * we rely on the DVB API definition where exactly one complete
 	 * section is delivered in buffer1
 	 */

drivers/media/dvb-frontends/af9013.h

@@ -38,6 +38,13 @@
  * @api_version: Firmware API version.
  * @gpio: GPIOs.
  * @get_dvb_frontend: Get DVB frontend callback.
+ *
+ * AF9013/5 GPIOs (mostly guessed):
+ *   * demod#1-gpio#0 - set demod#2 i2c-addr for dual devices
+ *   * demod#1-gpio#1 - xtal setting (?)
+ *   * demod#1-gpio#3 - tuner#1
+ *   * demod#2-gpio#0 - tuner#2
+ *   * demod#2-gpio#1 - xtal setting (?)
  */
 struct af9013_platform_data {
 	/*
@@ -89,16 +96,15 @@ struct af9013_platform_data {
 #define AF9013_TS_PARALLEL  AF9013_TS_MODE_PARALLEL
 #define AF9013_TS_SERIAL    AF9013_TS_MODE_SERIAL
 
-/*
- * AF9013/5 GPIOs (mostly guessed)
- * demod#1-gpio#0 - set demod#2 i2c-addr for dual devices
- * demod#1-gpio#1 - xtal setting (?)
- * demod#1-gpio#3 - tuner#1
- * demod#2-gpio#0 - tuner#2
- * demod#2-gpio#1 - xtal setting (?)
- */
-
 #if IS_REACHABLE(CONFIG_DVB_AF9013)
+/**
+ * Attach an af9013 demod
+ *
+ * @config: pointer to &struct af9013_config with demod configuration.
+ * @i2c: i2c adapter to use.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
 extern struct dvb_frontend *af9013_attach(const struct af9013_config *config,
 	struct i2c_adapter *i2c);
 #else

drivers/media/dvb-frontends/ascot2e.h

@@ -41,6 +41,15 @@ struct ascot2e_config {
 };
 
 #if IS_REACHABLE(CONFIG_DVB_ASCOT2E)
+/**
+ * Attach an ascot2e tuner
+ *
+ * @fe: frontend to be attached
+ * @config: pointer to &struct ascot2e_config with tuner configuration.
+ * @i2c: i2c adapter to use.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
 extern struct dvb_frontend *ascot2e_attach(struct dvb_frontend *fe,
 					const struct ascot2e_config *config,
 					struct i2c_adapter *i2c);

drivers/media/dvb-frontends/cxd2820r.h

@@ -49,7 +49,6 @@
  * @gpio_chip_base: GPIO.
  * @get_dvb_frontend: Get DVB frontend.
  */
-
 struct cxd2820r_platform_data {
 	u8 ts_mode;
 	bool ts_clk_inv;
@@ -62,6 +61,17 @@ struct cxd2820r_platform_data {
 	bool attach_in_use;
 };
 
+/**
+ * struct cxd2820r_config - configuration for cxd2020r demod
+ *
+ * @i2c_address: Demodulator I2C address. Driver determines DVB-C slave I2C
+ *		 address automatically from master address.
+ *		 Default: none, must set. Values: 0x6c, 0x6d.
+ * @ts_mode:	TS output mode. Default: none, must set. Values: FIXME?
+ * @ts_clock_inv: TS clock inverted. Default: 0. Values: 0, 1.
+ * @if_agc_polarity: Default: 0. Values: 0, 1
+ * @spec_inv:	Spectrum inversion. Default: 0. Values: 0, 1.
+ */
 struct cxd2820r_config {
 	/* Demodulator I2C address.
 	 * Driver determines DVB-C slave I2C address automatically from master
@@ -98,6 +108,18 @@ struct cxd2820r_config {
 
 
 #if IS_REACHABLE(CONFIG_DVB_CXD2820R)
+/**
+ * Attach a cxd2820r demod
+ *
+ * @config: pointer to &struct cxd2820r_config with demod configuration.
+ * @i2c: i2c adapter to use.
+ * @gpio_chip_base: if zero, disables GPIO setting. Otherwise, if
+ *		    CONFIG_GPIOLIB is set dynamically allocate
+ *		    gpio base; if is not set, use its value to
+ *		    setup the GPIO pins.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
 extern struct dvb_frontend *cxd2820r_attach(
 	const struct cxd2820r_config *config,
 	struct i2c_adapter *i2c,

drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h

@@ -52,7 +52,7 @@ struct i2c_device_addr {
 };
 
 
-/**
+/*
 * \def IS_I2C_10BIT( addr )
 * \brief Determine if I2C address 'addr' is a 10 bits address or not.
 * \param addr The I2C address.
@@ -67,7 +67,7 @@ struct i2c_device_addr {
 Exported FUNCTIONS
 ------------------------------------------------------------------------------*/
 
-/**
+/*
 * \fn drxbsp_i2c_init()
 * \brief Initialize I2C communication module.
 * \return drx_status_t Return status.
@@ -76,7 +76,7 @@ Exported FUNCTIONS
 */
 	drx_status_t drxbsp_i2c_init(void);
 
-/**
+/*
 * \fn drxbsp_i2c_term()
 * \brief Terminate I2C communication module.
 * \return drx_status_t Return status.
@@ -85,7 +85,7 @@ Exported FUNCTIONS
 */
 	drx_status_t drxbsp_i2c_term(void);
 
-/**
+/*
 * \fn drx_status_t drxbsp_i2c_write_read( struct i2c_device_addr *w_dev_addr,
 *                                       u16 w_count,
 *                                       u8 *wData,
@@ -121,7 +121,7 @@ Exported FUNCTIONS
 					 struct i2c_device_addr *r_dev_addr,
 					 u16 r_count, u8 *r_data);
 
-/**
+/*
 * \fn drxbsp_i2c_error_text()
 * \brief Returns a human readable error.
 * Counter part of numerical drx_i2c_error_g.
@@ -130,7 +130,7 @@ Exported FUNCTIONS
 */
 	char *drxbsp_i2c_error_text(void);
 
-/**
+/*
 * \var drx_i2c_error_g;
 * \brief I2C specific error codes, platform dependent.
 */

drivers/media/dvb-frontends/drx39xyj/drxj.h

@@ -69,15 +69,15 @@ TYPEDEFS
 
 	struct drxjscu_cmd {
 		u16 command;
-			/**< Command number */
+			/*< Command number */
 		u16 parameter_len;
-			/**< Data length in byte */
+			/*< Data length in byte */
 		u16 result_len;
-			/**< result length in byte */
+			/*< result length in byte */
 		u16 *parameter;
-			/**< General purpous param */
+			/*< General purpous param */
 		u16 *result;
-			/**< General purpous param */};
+			/*< General purpous param */};
 
 /*============================================================================*/
 /*============================================================================*/
@@ -130,7 +130,7 @@ TYPEDEFS
 
 		DRXJ_CFG_MAX	/* dummy, never to be used */};
 
-/**
+/*
 * /struct enum drxj_cfg_smart_ant_io * smart antenna i/o.
 */
 enum drxj_cfg_smart_ant_io {
@@ -138,7 +138,7 @@ enum drxj_cfg_smart_ant_io {
 	DRXJ_SMT_ANT_INPUT
 };
 
-/**
+/*
 * /struct struct drxj_cfg_smart_ant * Set smart antenna.
 */
 	struct drxj_cfg_smart_ant {
@@ -146,7 +146,7 @@ enum drxj_cfg_smart_ant_io {
 		u16 ctrl_data;
 	};
 
-/**
+/*
 * /struct DRXJAGCSTATUS_t
 * AGC status information from the DRXJ-IQM-AF.
 */
@@ -158,7 +158,7 @@ struct drxj_agc_status {
 
 /* DRXJ_CFG_AGC_RF, DRXJ_CFG_AGC_IF */
 
-/**
+/*
 * /struct enum drxj_agc_ctrl_mode * Available AGCs modes in the DRXJ.
 */
 	enum drxj_agc_ctrl_mode {
@@ -166,7 +166,7 @@ struct drxj_agc_status {
 		DRX_AGC_CTRL_USER,
 		DRX_AGC_CTRL_OFF};
 
-/**
+/*
 * /struct struct drxj_cfg_agc * Generic interface for all AGCs present on the DRXJ.
 */
 	struct drxj_cfg_agc {
@@ -182,7 +182,7 @@ struct drxj_agc_status {
 
 /* DRXJ_CFG_PRE_SAW */
 
-/**
+/*
 * /struct struct drxj_cfg_pre_saw * Interface to configure pre SAW sense.
 */
 	struct drxj_cfg_pre_saw {
@@ -192,14 +192,14 @@ struct drxj_agc_status {
 
 /* DRXJ_CFG_AFE_GAIN */
 
-/**
+/*
 * /struct struct drxj_cfg_afe_gain * Interface to configure gain of AFE (LNA + PGA).
 */
 	struct drxj_cfg_afe_gain {
 		enum drx_standard standard;	/* standard to which these settings apply */
 		u16 gain;	/* gain in 0.1 dB steps, DRXJ range 140 .. 335 */};
 
-/**
+/*
 * /struct drxjrs_errors
 * Available failure information in DRXJ_FEC_RS.
 *
@@ -208,25 +208,25 @@ struct drxj_agc_status {
 */
 	struct drxjrs_errors {
 		u16 nr_bit_errors;
-				/**< no of pre RS bit errors          */
+				/*< no of pre RS bit errors          */
 		u16 nr_symbol_errors;
-				/**< no of pre RS symbol errors       */
+				/*< no of pre RS symbol errors       */
 		u16 nr_packet_errors;
-				/**< no of pre RS packet errors       */
+				/*< no of pre RS packet errors       */
 		u16 nr_failures;
-				/**< no of post RS failures to decode */
+				/*< no of post RS failures to decode */
 		u16 nr_snc_par_fail_count;
-				/**< no of post RS bit erros          */
+				/*< no of post RS bit erros          */
 	};
 
-/**
+/*
 * /struct struct drxj_cfg_vsb_misc * symbol error rate
 */
 	struct drxj_cfg_vsb_misc {
 		u32 symb_error;
-			      /**< symbol error rate sps */};
+			      /*< symbol error rate sps */};
 
-/**
+/*
 * /enum enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
 *
 */
@@ -234,7 +234,7 @@ struct drxj_agc_status {
 		DRXJ_MPEG_START_WIDTH_1CLKCYC,
 		DRXJ_MPEG_START_WIDTH_8CLKCYC};
 
-/**
+/*
 * /enum enum drxj_mpeg_output_clock_rate * Mpeg output clock rate.
 *
 */
@@ -247,20 +247,20 @@ struct drxj_agc_status {
 		DRXJ_MPEGOUTPUT_CLOCK_RATE_25313K,
 		DRXJ_MPEGOUTPUT_CLOCK_RATE_21696K};
 
-/**
+/*
 * /struct DRXJCfgMisc_t
 * Change TEI bit of MPEG output
 * reverse MPEG output bit order
 * set MPEG output clock rate
 */
 	struct drxj_cfg_mpeg_output_misc {
-		bool disable_tei_handling;	      /**< if true pass (not change) TEI bit */
-		bool bit_reverse_mpeg_outout;	      /**< if true, parallel: msb on MD0; serial: lsb out first */
+		bool disable_tei_handling;	      /*< if true pass (not change) TEI bit */
+		bool bit_reverse_mpeg_outout;	      /*< if true, parallel: msb on MD0; serial: lsb out first */
 		enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate;
-						      /**< set MPEG output clock rate that overwirtes the derived one from symbol rate */
-		enum drxj_mpeg_start_width mpeg_start_width;  /**< set MPEG output start width */};
+						      /*< set MPEG output clock rate that overwirtes the derived one from symbol rate */
+		enum drxj_mpeg_start_width mpeg_start_width;  /*< set MPEG output start width */};
 
-/**
+/*
 * /enum enum drxj_xtal_freq * Supported external crystal reference frequency.
 */
 	enum drxj_xtal_freq {
@@ -269,21 +269,21 @@ struct drxj_agc_status {
 		DRXJ_XTAL_FREQ_20P25MHZ,
 		DRXJ_XTAL_FREQ_4MHZ};
 
-/**
+/*
 * /enum enum drxj_xtal_freq * Supported external crystal reference frequency.
 */
 	enum drxji2c_speed {
 		DRXJ_I2C_SPEED_400KBPS,
 		DRXJ_I2C_SPEED_100KBPS};
 
-/**
+/*
 * /struct struct drxj_cfg_hw_cfg * Get hw configuration, such as crystal reference frequency, I2C speed, etc...
 */
 	struct drxj_cfg_hw_cfg {
 		enum drxj_xtal_freq xtal_freq;
-				   /**< crystal reference frequency */
+				   /*< crystal reference frequency */
 		enum drxji2c_speed i2c_speed;
-				   /**< 100 or 400 kbps */};
+				   /*< 100 or 400 kbps */};
 
 /*
  *  DRXJ_CFG_ATV_MISC
@@ -352,7 +352,7 @@ struct drxj_cfg_oob_misc {
  *  DRXJ_CFG_ATV_OUTPUT
  */
 
-/**
+/*
 * /enum DRXJAttenuation_t
 * Attenuation setting for SIF AGC.
 *
@@ -363,7 +363,7 @@ struct drxj_cfg_oob_misc {
 		DRXJ_SIF_ATTENUATION_6DB,
 		DRXJ_SIF_ATTENUATION_9DB};
 
-/**
+/*
 * /struct struct drxj_cfg_atv_output * SIF attenuation setting.
 *
 */
@@ -398,7 +398,7 @@ struct drxj_cfg_atv_output {
 /*============================================================================*/
 
 /*========================================*/
-/**
+/*
 * /struct struct drxj_data * DRXJ specific attributes.
 *
 * Global data container for DRXJ specific data.
@@ -406,93 +406,93 @@ struct drxj_cfg_atv_output {
 */
 	struct drxj_data {
 		/* device capabilties (determined during drx_open()) */
-		bool has_lna;		  /**< true if LNA (aka PGA) present */
-		bool has_oob;		  /**< true if OOB supported */
-		bool has_ntsc;		  /**< true if NTSC supported */
-		bool has_btsc;		  /**< true if BTSC supported */
-		bool has_smatx;	  /**< true if mat_tx is available */
-		bool has_smarx;	  /**< true if mat_rx is available */
-		bool has_gpio;		  /**< true if GPIO is available */
-		bool has_irqn;		  /**< true if IRQN is available */
+		bool has_lna;		  /*< true if LNA (aka PGA) present */
+		bool has_oob;		  /*< true if OOB supported */
+		bool has_ntsc;		  /*< true if NTSC supported */
+		bool has_btsc;		  /*< true if BTSC supported */
+		bool has_smatx;	  /*< true if mat_tx is available */
+		bool has_smarx;	  /*< true if mat_rx is available */
+		bool has_gpio;		  /*< true if GPIO is available */
+		bool has_irqn;		  /*< true if IRQN is available */
 		/* A1/A2/A... */
-		u8 mfx;		  /**< metal fix */
+		u8 mfx;		  /*< metal fix */
 
 		/* tuner settings */
-		bool mirror_freq_spect_oob;/**< tuner inversion (true = tuner mirrors the signal */
+		bool mirror_freq_spect_oob;/*< tuner inversion (true = tuner mirrors the signal */
 
 		/* standard/channel settings */
-		enum drx_standard standard;	  /**< current standard information                     */
+		enum drx_standard standard;	  /*< current standard information                     */
 		enum drx_modulation constellation;
-					  /**< current constellation                            */
-		s32 frequency; /**< center signal frequency in KHz                   */
+					  /*< current constellation                            */
+		s32 frequency; /*< center signal frequency in KHz                   */
 		enum drx_bandwidth curr_bandwidth;
-					  /**< current channel bandwidth                        */
-		enum drx_mirror mirror;	  /**< current channel mirror                           */
+					  /*< current channel bandwidth                        */
+		enum drx_mirror mirror;	  /*< current channel mirror                           */
 
 		/* signal quality information */
-		u32 fec_bits_desired;	  /**< BER accounting period                            */
-		u16 fec_vd_plen;	  /**< no of trellis symbols: VD SER measurement period */
-		u16 qam_vd_prescale;	  /**< Viterbi Measurement Prescale                     */
-		u16 qam_vd_period;	  /**< Viterbi Measurement period                       */
-		u16 fec_rs_plen;	  /**< defines RS BER measurement period                */
-		u16 fec_rs_prescale;	  /**< ReedSolomon Measurement Prescale                 */
-		u16 fec_rs_period;	  /**< ReedSolomon Measurement period                   */
-		bool reset_pkt_err_acc;	  /**< Set a flag to reset accumulated packet error     */
-		u16 pkt_err_acc_start;	  /**< Set a flag to reset accumulated packet error     */
+		u32 fec_bits_desired;	  /*< BER accounting period                            */
+		u16 fec_vd_plen;	  /*< no of trellis symbols: VD SER measurement period */
+		u16 qam_vd_prescale;	  /*< Viterbi Measurement Prescale                     */
+		u16 qam_vd_period;	  /*< Viterbi Measurement period                       */
+		u16 fec_rs_plen;	  /*< defines RS BER measurement period                */
+		u16 fec_rs_prescale;	  /*< ReedSolomon Measurement Prescale                 */
+		u16 fec_rs_period;	  /*< ReedSolomon Measurement period                   */
+		bool reset_pkt_err_acc;	  /*< Set a flag to reset accumulated packet error     */
+		u16 pkt_err_acc_start;	  /*< Set a flag to reset accumulated packet error     */
 
 		/* HI configuration */
-		u16 hi_cfg_timing_div;	  /**< HI Configure() parameter 2                       */
-		u16 hi_cfg_bridge_delay;	  /**< HI Configure() parameter 3                       */
-		u16 hi_cfg_wake_up_key;	  /**< HI Configure() parameter 4                       */
-		u16 hi_cfg_ctrl;	  /**< HI Configure() parameter 5                       */
-		u16 hi_cfg_transmit;	  /**< HI Configure() parameter 6                       */
+		u16 hi_cfg_timing_div;	  /*< HI Configure() parameter 2                       */
+		u16 hi_cfg_bridge_delay;	  /*< HI Configure() parameter 3                       */
+		u16 hi_cfg_wake_up_key;	  /*< HI Configure() parameter 4                       */
+		u16 hi_cfg_ctrl;	  /*< HI Configure() parameter 5                       */
+		u16 hi_cfg_transmit;	  /*< HI Configure() parameter 6                       */
 
 		/* UIO configuration */
-		enum drxuio_mode uio_sma_rx_mode;/**< current mode of SmaRx pin                        */
-		enum drxuio_mode uio_sma_tx_mode;/**< current mode of SmaTx pin                        */
-		enum drxuio_mode uio_gpio_mode; /**< current mode of ASEL pin                         */
-		enum drxuio_mode uio_irqn_mode; /**< current mode of IRQN pin                         */
+		enum drxuio_mode uio_sma_rx_mode;/*< current mode of SmaRx pin                        */
+		enum drxuio_mode uio_sma_tx_mode;/*< current mode of SmaTx pin                        */
+		enum drxuio_mode uio_gpio_mode; /*< current mode of ASEL pin                         */
+		enum drxuio_mode uio_irqn_mode; /*< current mode of IRQN pin                         */
 
 		/* IQM fs frequecy shift and inversion */
-		u32 iqm_fs_rate_ofs;	   /**< frequency shifter setting after setchannel      */
-		bool pos_image;	   /**< Ture: positive image                            */
+		u32 iqm_fs_rate_ofs;	   /*< frequency shifter setting after setchannel      */
+		bool pos_image;	   /*< Ture: positive image                            */
 		/* IQM RC frequecy shift */
-		u32 iqm_rc_rate_ofs;	   /**< frequency shifter setting after setchannel      */
+		u32 iqm_rc_rate_ofs;	   /*< frequency shifter setting after setchannel      */
 
 		/* ATV configuration */
-		u32 atv_cfg_changed_flags; /**< flag: flags cfg changes */
-		s16 atv_top_equ0[DRXJ_COEF_IDX_MAX];	     /**< shadow of ATV_TOP_EQU0__A */
-		s16 atv_top_equ1[DRXJ_COEF_IDX_MAX];	     /**< shadow of ATV_TOP_EQU1__A */
-		s16 atv_top_equ2[DRXJ_COEF_IDX_MAX];	     /**< shadow of ATV_TOP_EQU2__A */
-		s16 atv_top_equ3[DRXJ_COEF_IDX_MAX];	     /**< shadow of ATV_TOP_EQU3__A */
-		bool phase_correction_bypass;/**< flag: true=bypass */
-		s16 atv_top_vid_peak;	  /**< shadow of ATV_TOP_VID_PEAK__A */
-		u16 atv_top_noise_th;	  /**< shadow of ATV_TOP_NOISE_TH__A */
-		bool enable_cvbs_output;  /**< flag CVBS ouput enable */
-		bool enable_sif_output;	  /**< flag SIF ouput enable */
+		u32 atv_cfg_changed_flags; /*< flag: flags cfg changes */
+		s16 atv_top_equ0[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU0__A */
+		s16 atv_top_equ1[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU1__A */
+		s16 atv_top_equ2[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU2__A */
+		s16 atv_top_equ3[DRXJ_COEF_IDX_MAX];	     /*< shadow of ATV_TOP_EQU3__A */
+		bool phase_correction_bypass;/*< flag: true=bypass */
+		s16 atv_top_vid_peak;	  /*< shadow of ATV_TOP_VID_PEAK__A */
+		u16 atv_top_noise_th;	  /*< shadow of ATV_TOP_NOISE_TH__A */
+		bool enable_cvbs_output;  /*< flag CVBS ouput enable */
+		bool enable_sif_output;	  /*< flag SIF ouput enable */
 		 enum drxjsif_attenuation sif_attenuation;
-					  /**< current SIF att setting */
+					  /*< current SIF att setting */
 		/* Agc configuration for QAM and VSB */
-		struct drxj_cfg_agc qam_rf_agc_cfg; /**< qam RF AGC config */
-		struct drxj_cfg_agc qam_if_agc_cfg; /**< qam IF AGC config */
-		struct drxj_cfg_agc vsb_rf_agc_cfg; /**< vsb RF AGC config */
-		struct drxj_cfg_agc vsb_if_agc_cfg; /**< vsb IF AGC config */
+		struct drxj_cfg_agc qam_rf_agc_cfg; /*< qam RF AGC config */
+		struct drxj_cfg_agc qam_if_agc_cfg; /*< qam IF AGC config */
+		struct drxj_cfg_agc vsb_rf_agc_cfg; /*< vsb RF AGC config */
+		struct drxj_cfg_agc vsb_if_agc_cfg; /*< vsb IF AGC config */
 
 		/* PGA gain configuration for QAM and VSB */
-		u16 qam_pga_cfg;	  /**< qam PGA config */
-		u16 vsb_pga_cfg;	  /**< vsb PGA config */
+		u16 qam_pga_cfg;	  /*< qam PGA config */
+		u16 vsb_pga_cfg;	  /*< vsb PGA config */
 
 		/* Pre SAW configuration for QAM and VSB */
 		struct drxj_cfg_pre_saw qam_pre_saw_cfg;
-					  /**< qam pre SAW config */
+					  /*< qam pre SAW config */
 		struct drxj_cfg_pre_saw vsb_pre_saw_cfg;
-					  /**< qam pre SAW config */
+					  /*< qam pre SAW config */
 
 		/* Version information */
-		char v_text[2][12];	  /**< allocated text versions */
-		struct drx_version v_version[2]; /**< allocated versions structs */
+		char v_text[2][12];	  /*< allocated text versions */
+		struct drx_version v_version[2]; /*< allocated versions structs */
 		struct drx_version_list v_list_elements[2];
-					  /**< allocated version list */
+					  /*< allocated version list */
 
 		/* smart antenna configuration */
 		bool smart_ant_inverted;
@@ -502,25 +502,25 @@ struct drxj_cfg_atv_output {
 		bool oob_power_on;
 
 		/* MPEG static bitrate setting */
-		u32 mpeg_ts_static_bitrate;  /**< bitrate static MPEG output */
-		bool disable_te_ihandling;  /**< MPEG TS TEI handling */
-		bool bit_reverse_mpeg_outout;/**< MPEG output bit order */
+		u32 mpeg_ts_static_bitrate;  /*< bitrate static MPEG output */
+		bool disable_te_ihandling;  /*< MPEG TS TEI handling */
+		bool bit_reverse_mpeg_outout;/*< MPEG output bit order */
 		 enum drxj_mpeg_output_clock_rate mpeg_output_clock_rate;
-					    /**< MPEG output clock rate */
+					    /*< MPEG output clock rate */
 		 enum drxj_mpeg_start_width mpeg_start_width;
-					    /**< MPEG Start width */
+					    /*< MPEG Start width */
 
 		/* Pre SAW & Agc configuration for ATV */
 		struct drxj_cfg_pre_saw atv_pre_saw_cfg;
-					  /**< atv pre SAW config */
-		struct drxj_cfg_agc atv_rf_agc_cfg; /**< atv RF AGC config */
-		struct drxj_cfg_agc atv_if_agc_cfg; /**< atv IF AGC config */
-		u16 atv_pga_cfg;	  /**< atv pga config    */
+					  /*< atv pre SAW config */
+		struct drxj_cfg_agc atv_rf_agc_cfg; /*< atv RF AGC config */
+		struct drxj_cfg_agc atv_if_agc_cfg; /*< atv IF AGC config */
+		u16 atv_pga_cfg;	  /*< atv pga config    */
 
 		u32 curr_symbol_rate;
 
 		/* pin-safe mode */
-		bool pdr_safe_mode;	    /**< PDR safe mode activated      */
+		bool pdr_safe_mode;	    /*< PDR safe mode activated      */
 		u16 pdr_safe_restore_val_gpio;
 		u16 pdr_safe_restore_val_v_sync;
 		u16 pdr_safe_restore_val_sma_rx;
@@ -531,12 +531,12 @@ struct drxj_cfg_atv_output {
 		enum drxj_cfg_oob_lo_power oob_lo_pow;
 
 		struct drx_aud_data aud_data;
-				    /**< audio storage                  */};
+				    /*< audio storage                  */};
 
 /*-------------------------------------------------------------------------
 Access MACROS
 -------------------------------------------------------------------------*/
-/**
+/*
 * \brief Compilable references to attributes
 * \param d pointer to demod instance
 *
@@ -554,7 +554,7 @@ Access MACROS
 DEFINES
 -------------------------------------------------------------------------*/
 
-/**
+/*
 * \def DRXJ_NTSC_CARRIER_FREQ_OFFSET
 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
 *
@@ -569,7 +569,7 @@ DEFINES
 */
 #define DRXJ_NTSC_CARRIER_FREQ_OFFSET           ((s32)(1750))
 
-/**
+/*
 * \def DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET
 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
 *
@@ -585,7 +585,7 @@ DEFINES
 */
 #define DRXJ_PAL_SECAM_BG_CARRIER_FREQ_OFFSET   ((s32)(2375))
 
-/**
+/*
 * \def DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET
 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
 *
@@ -601,7 +601,7 @@ DEFINES
 */
 #define DRXJ_PAL_SECAM_DKIL_CARRIER_FREQ_OFFSET ((s32)(2775))
 
-/**
+/*
 * \def DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET
 * \brief Offset from picture carrier to centre frequency in kHz, in RF domain
 *
@@ -616,7 +616,7 @@ DEFINES
 */
 #define DRXJ_PAL_SECAM_LP_CARRIER_FREQ_OFFSET   ((s32)(-3255))
 
-/**
+/*
 * \def DRXJ_FM_CARRIER_FREQ_OFFSET
 * \brief Offset from sound carrier to centre frequency in kHz, in RF domain
 *

drivers/media/dvb-frontends/drxk.h

@@ -20,17 +20,18 @@
  * @antenna_dvbt:	GPIO bit for changing antenna to DVB-C. A value of 1
  *			means that 1=DVBC, 0 = DVBT. Zero means the opposite.
  * @mpeg_out_clk_strength: DRXK Mpeg output clock drive strength.
+ * @chunk_size:		maximum size for I2C messages
  * @microcode_name:	Name of the firmware file with the microcode
  * @qam_demod_parameter_count:	The number of parameters used for the command
  *				to set the demodulator parameters. All
  *				firmwares are using the 2-parameter commmand.
- *				An exception is the "drxk_a3.mc" firmware,
+ *				An exception is the ``drxk_a3.mc`` firmware,
  *				which uses the 4-parameter command.
  *				A value of 0 (default) or lower indicates that
  *				the correct number of parameters will be
  *				automatically detected.
  *
- * On the *_gpio vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
+ * On the ``*_gpio`` vars, bit 0 is UIO-1, bit 1 is UIO-2 and bit 2 is
  * UIO-3.
  */
 struct drxk_config {
@@ -52,6 +53,14 @@ struct drxk_config {
 };
 
 #if IS_REACHABLE(CONFIG_DVB_DRXK)
+/**
+ * Attach a drxk demod
+ *
+ * @config: pointer to &struct drxk_config with demod configuration.
+ * @i2c: i2c adapter to use.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
 extern struct dvb_frontend *drxk_attach(const struct drxk_config *config,
 					struct i2c_adapter *i2c);
 #else

drivers/media/dvb-frontends/drxk_hard.c

@@ -207,9 +207,9 @@ static inline u32 log10times100(u32 value)
 	return (100L * intlog10(value)) >> 24;
 }
 
-/****************************************************************************/
+/***************************************************************************/
 /* I2C **********************************************************************/
-/****************************************************************************/
+/***************************************************************************/
 
 static int drxk_i2c_lock(struct drxk_state *state)
 {
@@ -3444,7 +3444,7 @@ static int dvbt_ctrl_set_sqi_speed(struct drxk_state *state,
 
 /*============================================================================*/
 
-/**
+/*
 * \brief Activate DVBT specific presets
 * \param demod instance of demodulator.
 * \return DRXStatus_t.
@@ -3484,7 +3484,7 @@ static int dvbt_activate_presets(struct drxk_state *state)
 
 /*============================================================================*/
 
-/**
+/*
 * \brief Initialize channelswitch-independent settings for DVBT.
 * \param demod instance of demodulator.
 * \return DRXStatus_t.
@@ -3696,7 +3696,7 @@ static int set_dvbt_standard(struct drxk_state *state,
 }
 
 /*============================================================================*/
-/**
+/*
 * \brief start dvbt demodulating for channel.
 * \param demod instance of demodulator.
 * \return DRXStatus_t.
@@ -3732,7 +3732,7 @@ static int dvbt_start(struct drxk_state *state)
 
 /*============================================================================*/
 
-/**
+/*
 * \brief Set up dvbt demodulator for channel.
 * \param demod instance of demodulator.
 * \return DRXStatus_t.
@@ -4086,7 +4086,7 @@ static int set_dvbt(struct drxk_state *state, u16 intermediate_freqk_hz,
 
 /*============================================================================*/
 
-/**
+/*
 * \brief Retrieve lock status .
 * \param demod    Pointer to demodulator instance.
 * \param lockStat Pointer to lock status structure.
@@ -4148,7 +4148,7 @@ static int power_up_qam(struct drxk_state *state)
 }
 
 
-/** Power Down QAM */
+/* Power Down QAM */
 static int power_down_qam(struct drxk_state *state)
 {
 	u16 data = 0;
@@ -4186,7 +4186,7 @@ static int power_down_qam(struct drxk_state *state)
 
 /*============================================================================*/
 
-/**
+/*
 * \brief Setup of the QAM Measurement intervals for signal quality
 * \param demod instance of demod.
 * \param modulation current modulation.
@@ -4461,7 +4461,7 @@ static int set_qam16(struct drxk_state *state)
 
 /*============================================================================*/
 
-/**
+/*
 * \brief QAM32 specific setup
 * \param demod instance of demod.
 * \return DRXStatus_t.
@@ -4657,7 +4657,7 @@ static int set_qam32(struct drxk_state *state)
 
 /*============================================================================*/
 
-/**
+/*
 * \brief QAM64 specific setup
 * \param demod instance of demod.
 * \return DRXStatus_t.
@@ -4852,7 +4852,7 @@ static int set_qam64(struct drxk_state *state)
 
 /*============================================================================*/
 
-/**
+/*
 * \brief QAM128 specific setup
 * \param demod: instance of demod.
 * \return DRXStatus_t.
@@ -5049,7 +5049,7 @@ static int set_qam128(struct drxk_state *state)
 
 /*============================================================================*/
 
-/**
+/*
 * \brief QAM256 specific setup
 * \param demod: instance of demod.
 * \return DRXStatus_t.
@@ -5244,7 +5244,7 @@ static int set_qam256(struct drxk_state *state)
 
 
 /*============================================================================*/
-/**
+/*
 * \brief Reset QAM block.
 * \param demod:   instance of demod.
 * \param channel: pointer to channel data.
@@ -5272,7 +5272,7 @@ static int qam_reset_qam(struct drxk_state *state)
 
 /*============================================================================*/
 
-/**
+/*
 * \brief Set QAM symbolrate.
 * \param demod:   instance of demod.
 * \param channel: pointer to channel data.
@@ -5341,7 +5341,7 @@ static int qam_set_symbolrate(struct drxk_state *state)
 
 /*============================================================================*/
 
-/**
+/*
 * \brief Get QAM lock status.
 * \param demod:   instance of demod.
 * \param channel: pointer to channel data.

drivers/media/dvb-frontends/dvb-pll.h

@@ -30,16 +30,17 @@
 #define DVB_PLL_TDEE4		       18
 #define DVB_PLL_THOMSON_DTT7520X       19
 
+#if IS_REACHABLE(CONFIG_DVB_PLL)
 /**
  * Attach a dvb-pll to the supplied frontend structure.
  *
- * @param fe Frontend to attach to.
- * @param pll_addr i2c address of the PLL (if used).
- * @param i2c i2c adapter to use (set to NULL if not used).
- * @param pll_desc_id dvb_pll_desc to use.
- * @return Frontend pointer on success, NULL on failure
+ * @fe: Frontend to attach to.
+ * @pll_addr: i2c address of the PLL (if used).
+ * @i2c: i2c adapter to use (set to NULL if not used).
+ * @pll_desc_id: dvb_pll_desc to use.
+ *
+ * return: Frontend pointer on success, NULL on failure
  */
-#if IS_REACHABLE(CONFIG_DVB_PLL)
 extern struct dvb_frontend *dvb_pll_attach(struct dvb_frontend *fe,
 					   int pll_addr,
 					   struct i2c_adapter *i2c,

drivers/media/dvb-frontends/helene.h

@@ -38,6 +38,7 @@ enum helene_xtal {
  * @set_tuner_priv:	Callback function private context
  * @set_tuner_callback:	Callback function that notifies the parent driver
  *			which tuner is active now
+ * @xtal: Cristal frequency as described by &enum helene_xtal
  */
 struct helene_config {
 	u8	i2c_address;
@@ -48,9 +49,31 @@ struct helene_config {
 };
 
 #if IS_REACHABLE(CONFIG_DVB_HELENE)
+/**
+ * Attach a helene tuner (terrestrial and cable standards)
+ *
+ * @fe: frontend to be attached
+ * @config: pointer to &struct helene_config with tuner configuration.
+ * @i2c: i2c adapter to use.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
 extern struct dvb_frontend *helene_attach(struct dvb_frontend *fe,
 					const struct helene_config *config,
 					struct i2c_adapter *i2c);
+
+/**
+ * Attach a helene tuner (satellite standards)
+ *
+ * @fe: frontend to be attached
+ * @config: pointer to &struct helene_config with tuner configuration.
+ * @i2c: i2c adapter to use.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
+extern struct dvb_frontend *helene_attach_s(struct dvb_frontend *fe,
+					const struct helene_config *config,
+					struct i2c_adapter *i2c);
 #else
 static inline struct dvb_frontend *helene_attach(struct dvb_frontend *fe,
 					const struct helene_config *config,
@@ -59,13 +82,6 @@ static inline struct dvb_frontend *helene_attach(struct dvb_frontend *fe,
 	pr_warn("%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
-#endif
-
-#if IS_REACHABLE(CONFIG_DVB_HELENE)
-extern struct dvb_frontend *helene_attach_s(struct dvb_frontend *fe,
-					const struct helene_config *config,
-					struct i2c_adapter *i2c);
-#else
 static inline struct dvb_frontend *helene_attach_s(struct dvb_frontend *fe,
 					const struct helene_config *config,
 					struct i2c_adapter *i2c)

drivers/media/dvb-frontends/horus3a.h

@@ -41,6 +41,15 @@ struct horus3a_config {
 };
 
 #if IS_REACHABLE(CONFIG_DVB_HORUS3A)
+/**
+ * Attach a horus3a tuner
+ *
+ * @fe: frontend to be attached
+ * @config: pointer to &struct helene_config with tuner configuration.
+ * @i2c: i2c adapter to use.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
 extern struct dvb_frontend *horus3a_attach(struct dvb_frontend *fe,
 					const struct horus3a_config *config,
 					struct i2c_adapter *i2c);

drivers/media/dvb-frontends/ix2505v.c

-/**
+/*
  * Driver for Sharp IX2505V (marked B0017) DVB-S silicon tuner
  *
  * Copyright (C) 2010 Malcolm Priestley
@@ -36,7 +36,7 @@ struct ix2505v_state {
 	u32 frequency;
 };
 
-/**
+/*
  *  Data read format of the Sharp IX2505V B0017
  *
  *  byte1:   1   |   1   |   0   |   0   |   0   |  MA1  |  MA0  |  1
@@ -99,7 +99,7 @@ static void ix2505v_release(struct dvb_frontend *fe)
 
 }
 
-/**
+/*
  *  Data write format of the Sharp IX2505V B0017
  *
  *  byte1:   1   |   1   |   0   |   0   |   0   | 0(MA1)| 0(MA0)|  0

drivers/media/dvb-frontends/ix2505v.h

@@ -20,31 +20,33 @@
 #include "dvb_frontend.h"
 
 /**
- * Attach a ix2505v tuner to the supplied frontend structure.
+ * struct ix2505v_config - ix2505 attachment configuration
  *
- * @param fe Frontend to attach to.
- * @param config ix2505v_config structure
- * @return FE pointer on success, NULL on failure.
+ * @tuner_address: tuner address
+ * @tuner_gain: Baseband AMP gain control 0/1=0dB(default) 2=-2bB 3=-4dB
+ * @tuner_chargepump: Charge pump output +/- 0=120 1=260 2=555 3=1200(default)
+ * @min_delay_ms: delay after tune
+ * @tuner_write_only: disables reads
  */
-
 struct ix2505v_config {
 	u8 tuner_address;
-
-	/*Baseband AMP gain control 0/1=0dB(default) 2=-2bB 3=-4dB */
 	u8 tuner_gain;
-
-	/*Charge pump output +/- 0=120 1=260 2=555 3=1200(default) */
 	u8 tuner_chargepump;
-
-	/* delay after tune */
 	int min_delay_ms;
-
-	/* disables reads*/
 	u8 tuner_write_only;
 
 };
 
 #if IS_REACHABLE(CONFIG_DVB_IX2505V)
+/**
+ * Attach a ix2505v tuner to the supplied frontend structure.
+ *
+ * @fe: Frontend to attach to.
+ * @config: pointer to &struct ix2505v_config
+ * @i2c: pointer to &struct i2c_adapter.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
 extern struct dvb_frontend *ix2505v_attach(struct dvb_frontend *fe,
 	const struct ix2505v_config *config, struct i2c_adapter *i2c);
 #else

drivers/media/dvb-frontends/l64781.c

@@ -517,7 +517,7 @@ struct dvb_frontend* l64781_attach(const struct l64781_config* config,
 	state->i2c = i2c;
 	state->first = 1;
 
-	/**
+	/*
 	 *  the L64781 won't show up before we send the reset_and_configure()
 	 *  broadcast. If nothing responds there is no L64781 on the bus...
 	 */

drivers/media/dvb-frontends/m88ds3103.h

@@ -24,6 +24,34 @@
  * 0x68,
  */
 
+/**
+ * enum m88ds3103_ts_mode - TS connection mode
+ * @M88DS3103_TS_SERIAL:	TS output pin D0, normal
+ * @M88DS3103_TS_SERIAL_D7:	TS output pin D7
+ * @M88DS3103_TS_PARALLEL:	TS Parallel mode
+ * @M88DS3103_TS_CI:		TS CI Mode
+ */
+enum m88ds3103_ts_mode {
+	M88DS3103_TS_SERIAL,
+	M88DS3103_TS_SERIAL_D7,
+	M88DS3103_TS_PARALLEL,
+	M88DS3103_TS_CI
+};
+
+/**
+ * enum m88ds3103_clock_out
+ * @M88DS3103_CLOCK_OUT_DISABLED:	Clock output is disabled
+ * @M88DS3103_CLOCK_OUT_ENABLED:	Clock output is enabled with crystal
+ *					clock.
+ * @M88DS3103_CLOCK_OUT_ENABLED_DIV2:	Clock output is enabled with half
+ *					crystal clock.
+ */
+enum m88ds3103_clock_out {
+	M88DS3103_CLOCK_OUT_DISABLED,
+	M88DS3103_CLOCK_OUT_ENABLED,
+	M88DS3103_CLOCK_OUT_ENABLED_DIV2
+};
+
 /**
  * struct m88ds3103_platform_data - Platform data for the m88ds3103 driver
  * @clk: Clock frequency.
@@ -44,24 +72,16 @@
  * @get_dvb_frontend: Get DVB frontend.
  * @get_i2c_adapter: Get I2C adapter.
  */
-
 struct m88ds3103_platform_data {
 	u32 clk;
 	u16 i2c_wr_max;
-#define M88DS3103_TS_SERIAL             0 /* TS output pin D0, normal */
-#define M88DS3103_TS_SERIAL_D7          1 /* TS output pin D7 */
-#define M88DS3103_TS_PARALLEL           2 /* TS Parallel mode */
-#define M88DS3103_TS_CI                 3 /* TS CI Mode */
-	u8 ts_mode:2;
+	enum m88ds3103_ts_mode ts_mode;
 	u32 ts_clk;
+	enum m88ds3103_clock_out clk_out;
 	u8 ts_clk_pol:1;
 	u8 spec_inv:1;
 	u8 agc;
 	u8 agc_inv:1;
-#define M88DS3103_CLOCK_OUT_DISABLED        0
-#define M88DS3103_CLOCK_OUT_ENABLED         1
-#define M88DS3103_CLOCK_OUT_ENABLED_DIV2    2
-	u8 clk_out:2;
 	u8 envelope_mode:1;
 	u8 lnb_hv_pol:1;
 	u8 lnb_en_pol:1;
@@ -73,105 +93,60 @@ struct m88ds3103_platform_data {
 	u8 attach_in_use:1;
 };
 
-/*
- * Do not add new m88ds3103_attach() users! Use I2C bindings instead.
+/**
+ * struct m88ds3103_config - m88ds3102 configuration
+ *
+ * @i2c_addr:	I2C address. Default: none, must set. Example: 0x68, ...
+ * @clock:	Device's clock. Default: none, must set. Example: 27000000
+ * @i2c_wr_max: Max bytes I2C provider is asked to write at once.
+ *		Default: none, must set. Example: 33, 65, ...
+ * @ts_mode:	TS output mode, as defined by &enum m88ds3103_ts_mode.
+ *		Default: M88DS3103_TS_SERIAL.
+ * @ts_clk:	TS clk in KHz. Default: 0.
+ * @ts_clk_pol:	TS clk polarity.Default: 0.
+ *		1-active at falling edge; 0-active at rising edge.
+ * @spec_inv:	Spectrum inversion. Default: 0.
+ * @agc_inv:	AGC polarity. Default: 0.
+ * @clock_out:	Clock output, as defined by &enum m88ds3103_clock_out.
+ *		Default: M88DS3103_CLOCK_OUT_DISABLED.
+ * @envelope_mode: DiSEqC envelope mode. Default: 0.
+ * @agc:	AGC configuration. Default: none, must set.
+ * @lnb_hv_pol:	LNB H/V pin polarity. Default: 0. Values:
+ *		1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18;
+ *		0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13.
+ * @lnb_en_pol:	LNB enable pin polarity. Default: 0. Values:
+ *		1: pin high to enable, pin low to disable;
+ *		0: pin high to disable, pin low to enable.
  */
 struct m88ds3103_config {
-	/*
-	 * I2C address
-	 * Default: none, must set
-	 * 0x68, ...
-	 */
 	u8 i2c_addr;
-
-	/*
-	 * clock
-	 * Default: none, must set
-	 * 27000000
-	 */
 	u32 clock;
-
-	/*
-	 * max bytes I2C provider is asked to write at once
-	 * Default: none, must set
-	 * 33, 65, ...
-	 */
 	u16 i2c_wr_max;
-
-	/*
-	 * TS output mode
-	 * Default: M88DS3103_TS_SERIAL
-	 */
-#define M88DS3103_TS_SERIAL             0 /* TS output pin D0, normal */
-#define M88DS3103_TS_SERIAL_D7          1 /* TS output pin D7 */
-#define M88DS3103_TS_PARALLEL           2 /* TS Parallel mode */
-#define M88DS3103_TS_CI                 3 /* TS CI Mode */
 	u8 ts_mode;
-
-	/*
-	 * TS clk in KHz
-	 * Default: 0.
-	 */
 	u32 ts_clk;
-
-	/*
-	 * TS clk polarity.
-	 * Default: 0. 1-active at falling edge; 0-active at rising edge.
-	 */
 	u8 ts_clk_pol:1;
-
-	/*
-	 * spectrum inversion
-	 * Default: 0
-	 */
 	u8 spec_inv:1;
-
-	/*
-	 * AGC polarity
-	 * Default: 0
-	 */
 	u8 agc_inv:1;
-
-	/*
-	 * clock output
-	 * Default: M88DS3103_CLOCK_OUT_DISABLED
-	 */
-#define M88DS3103_CLOCK_OUT_DISABLED        0
-#define M88DS3103_CLOCK_OUT_ENABLED         1
-#define M88DS3103_CLOCK_OUT_ENABLED_DIV2    2
 	u8 clock_out;
-
-	/*
-	 * DiSEqC envelope mode
-	 * Default: 0
-	 */
 	u8 envelope_mode:1;
-
-	/*
-	 * AGC configuration
-	 * Default: none, must set
-	 */
 	u8 agc;
-
-	/*
-	 * LNB H/V pin polarity
-	 * Default: 0.
-	 * 1: pin high set to VOLTAGE_13, pin low to set VOLTAGE_18.
-	 * 0: pin high set to VOLTAGE_18, pin low to set VOLTAGE_13.
-	 */
 	u8 lnb_hv_pol:1;
-
-	/*
-	 * LNB enable pin polarity
-	 * Default: 0.
-	 * 1: pin high to enable, pin low to disable.
-	 * 0: pin high to disable, pin low to enable.
-	 */
 	u8 lnb_en_pol:1;
 };
 
 #if defined(CONFIG_DVB_M88DS3103) || \
 		(defined(CONFIG_DVB_M88DS3103_MODULE) && defined(MODULE))
+/**
+ * Attach a m88ds3103 demod
+ *
+ * @config: pointer to &struct m88ds3103_config with demod configuration.
+ * @i2c: i2c adapter to use.
+ * @tuner_i2c: on success, returns the I2C adapter associated with
+ *		m88ds3103 tuner.
+ *
+ * return: FE pointer on success, NULL on failure.
+ * Note: Do not add new m88ds3103_attach() users! Use I2C bindings instead.
+ */
 extern struct dvb_frontend *m88ds3103_attach(
 		const struct m88ds3103_config *config,
 		struct i2c_adapter *i2c,

drivers/media/dvb-frontends/mb86a20s.h

@@ -26,7 +26,6 @@
  * @demod_address:	the demodulator's i2c address
  * @is_serial:		if true, TS is serial. Otherwise, TS is parallel
  */
-
 struct mb86a20s_config {
 	u32	fclk;
 	u8	demod_address;
@@ -34,9 +33,17 @@ struct mb86a20s_config {
 };
 
 #if IS_REACHABLE(CONFIG_DVB_MB86A20S)
+/**
+ * Attach a mb86a20s demod
+ *
+ * @config: pointer to &struct mb86a20s_config with demod configuration.
+ * @i2c: i2c adapter to use.
+ *
+ * return: FE pointer on success, NULL on failure.
+ */
 extern struct dvb_frontend *mb86a20s_attach(const struct mb86a20s_config *config,
 					   struct i2c_adapter *i2c);
-extern struct i2c_adapter *mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *);
+
 #else
 static inline struct dvb_frontend *mb86a20s_attach(
 	const struct mb86a20s_config *config, struct i2c_adapter *i2c)
@@ -44,12 +51,6 @@ static inline struct dvb_frontend *mb86a20s_attach(
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
 	return NULL;
 }
-static inline struct i2c_adapter *
-	mb86a20s_get_tuner_i2c_adapter(struct dvb_frontend *fe)
-{
-	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
-	return NULL;
-}
 #endif
 
 #endif /* MB86A20S */

drivers/media/dvb-frontends/mn88472.h

@@ -19,21 +19,21 @@
 
 #include <linux/dvb/frontend.h>
 
+/* Define old names for backward compatibility */
+#define VARIABLE_TS_CLOCK   MN88472_TS_CLK_VARIABLE
+#define FIXED_TS_CLOCK      MN88472_TS_CLK_FIXED
+#define SERIAL_TS_MODE      MN88472_TS_MODE_SERIAL
+#define PARALLEL_TS_MODE    MN88472_TS_MODE_PARALLEL
+
 /**
  * struct mn88472_config - Platform data for the mn88472 driver
  * @xtal: Clock frequency.
  * @ts_mode: TS mode.
  * @ts_clock: TS clock config.
  * @i2c_wr_max: Max number of bytes driver writes to I2C at once.
- * @get_dvb_frontend: Get DVB frontend.
+ * @fe: pointer to a frontend pointer
+ * @get_dvb_frontend: Get DVB frontend callback.
  */
-
-/* Define old names for backward compatibility */
-#define VARIABLE_TS_CLOCK   MN88472_TS_CLK_VARIABLE
-#define FIXED_TS_CLOCK      MN88472_TS_CLK_FIXED
-#define SERIAL_TS_MODE      MN88472_TS_MODE_SERIAL
-#define PARALLEL_TS_MODE    MN88472_TS_MODE_PARALLEL
-
 struct mn88472_config {
 	unsigned int xtal;
 

drivers/media/dvb-frontends/rtl2830.h

@@ -32,7 +32,6 @@
  * @pid_filter: Set PID to PID filter.
  * @pid_filter_ctrl: Control PID filter.
  */
-
 struct rtl2830_platform_data {
 	u32 clk;
 	bool spec_inv;

drivers/media/dvb-frontends/rtl2832.h

@@ -35,7 +35,6 @@
  * @pid_filter: Set PID to PID filter.
  * @pid_filter_ctrl: Control PID filter.
  */
-
 struct rtl2832_platform_data {
 	u32 clk;
 	/*

drivers/media/dvb-frontends/rtl2832_sdr.h

@@ -33,15 +33,11 @@
  * struct rtl2832_sdr_platform_data - Platform data for the rtl2832_sdr driver
  * @clk: Clock frequency (4000000, 16000000, 25000000, 28800000).
  * @tuner: Used tuner model.
- * @i2c_client: rtl2832 demod driver I2C client.
- * @bulk_read: rtl2832 driver private I/O interface.
- * @bulk_write: rtl2832 driver private I/O interface.
- * @update_bits: rtl2832 driver private I/O interface.
+ * @regmap: pointer to &struct regmap.
  * @dvb_frontend: rtl2832 DVB frontend.
  * @v4l2_subdev: Tuner v4l2 controls.
  * @dvb_usb_device: DVB USB interface for USB streaming.
  */
-
 struct rtl2832_sdr_platform_data {
 	u32 clk;
 	/*

drivers/media/dvb-frontends/sp887x.c

@@ -57,7 +57,7 @@ static int sp887x_writereg (struct sp887x_state* state, u16 reg, u16 data)
 	int ret;
 
 	if ((ret = i2c_transfer(state->i2c, &msg, 1)) != 1) {
-		/**
+		/*
 		 *  in case of soft reset we ignore ACK errors...
 		 */
 		if (!(reg == 0xf1a && data == 0x000 &&
@@ -130,7 +130,7 @@ static void sp887x_setup_agc (struct sp887x_state* state)
 
 #define BLOCKSIZE 30
 #define FW_SIZE 0x4000
-/**
+/*
  *  load firmware and setup MPEG interface...
  */
 static int sp887x_initial_setup (struct dvb_frontend* fe, const struct firmware *fw)
@@ -279,7 +279,7 @@ static int configure_reg0xc05(struct dtv_frontend_properties *p, u16 *reg0xc05)
 	return 0;
 }
 
-/**
+/*
  *  estimates division of two 24bit numbers,
  *  derived from the ves1820/stv0299 driver code
  */

drivers/media/dvb-frontends/stb6000.h

@@ -26,15 +26,16 @@
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 
+#if IS_REACHABLE(CONFIG_DVB_STB6000)
 /**
  * Attach a stb6000 tuner to the supplied frontend structure.
  *
- * @param fe Frontend to attach to.
- * @param addr i2c address of the tuner.
- * @param i2c i2c adapter to use.
- * @return FE pointer on success, NULL on failure.
+ * @fe: Frontend to attach to.
+ * @addr: i2c address of the tuner.
+ * @i2c: i2c adapter to use.
+ *
+ * return: FE pointer on success, NULL on failure.
  */
-#if IS_REACHABLE(CONFIG_DVB_STB6000)
 extern struct dvb_frontend *stb6000_attach(struct dvb_frontend *fe, int addr,
 					   struct i2c_adapter *i2c);
 #else

drivers/media/dvb-frontends/stv0299.c

@@ -368,7 +368,7 @@ static int stv0299_set_voltage(struct dvb_frontend *fe,
 	reg0x08 = stv0299_readreg (state, 0x08);
 	reg0x0c = stv0299_readreg (state, 0x0c);
 
-	/**
+	/*
 	 *  H/V switching over OP0, OP1 and OP2 are LNB power enable bits
 	 */
 	reg0x0c &= 0x0f;

drivers/media/dvb-frontends/tda10071.h

@@ -38,7 +38,6 @@
  * @tuner_i2c_addr: CX24118A tuner I2C address (0x14, 0x54, ...).
  * @get_dvb_frontend: Get DVB frontend.
  */
-
 struct tda10071_platform_data {
 	u32 clk;
 	u16 i2c_wr_max;

drivers/media/dvb-frontends/tda826x.h

@@ -29,11 +29,12 @@
 /**
  * Attach a tda826x tuner to the supplied frontend structure.
  *
- * @param fe Frontend to attach to.
- * @param addr i2c address of the tuner.
- * @param i2c i2c adapter to use.
- * @param has_loopthrough Set to 1 if the card has a loopthrough RF connector.
- * @return FE pointer on success, NULL on failure.
+ * @fe: Frontend to attach to.
+ * @addr: i2c address of the tuner.
+ * @i2c: i2c adapter to use.
+ * @has_loopthrough: Set to 1 if the card has a loopthrough RF connector.
+ *
+ * return: FE pointer on success, NULL on failure.
  */
 #if IS_REACHABLE(CONFIG_DVB_TDA826X)
 extern struct dvb_frontend* tda826x_attach(struct dvb_frontend *fe, int addr,

drivers/media/dvb-frontends/tua6100.c

-/**
+/*
  * Driver for Infineon tua6100 pll.
  *
  * (c) 2006 Andrew de Quincey

drivers/media/dvb-frontends/tua6100.h

-/**
+/*
  * Driver for Infineon tua6100 PLL.
  *
  * (c) 2006 Andrew de Quincey

drivers/media/dvb-frontends/zd1301_demod.h

@@ -27,7 +27,6 @@
  * @reg_read: Register read callback.
  * @reg_write: Register write callback.
  */
-
 struct zd1301_demod_platform_data {
 	void *reg_priv;
 	int (*reg_read)(void *, u16, u8 *);
@@ -41,8 +40,7 @@ struct zd1301_demod_platform_data {
  *
  * Return: Pointer to DVB frontend which given platform device owns.
  */
-
-struct dvb_frontend *zd1301_demod_get_dvb_frontend(struct platform_device *);
+struct dvb_frontend *zd1301_demod_get_dvb_frontend(struct platform_device *pdev);
 
 /**
  * zd1301_demod_get_i2c_adapter() - Get pointer to I2C adapter
@@ -50,11 +48,16 @@ struct dvb_frontend *zd1301_demod_get_dvb_frontend(struct platform_device *);
  *
  * Return: Pointer to I2C adapter which given platform device owns.
  */
-
-struct i2c_adapter *zd1301_demod_get_i2c_adapter(struct platform_device *);
+struct i2c_adapter *zd1301_demod_get_i2c_adapter(struct platform_device *pdev);
 
 #else
 
+/**
+ * zd1301_demod_get_dvb_frontend() - Attach a zd1301 frontend
+ * @dev: Pointer to platform device
+ *
+ * Return: Pointer to %struct dvb_frontend or NULL if attach fails.
+ */
 static inline struct dvb_frontend *zd1301_demod_get_dvb_frontend(struct platform_device *dev)
 {
 	printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/zl10036.c

-/**
+/*
  * Driver for Zarlink zl10036 DVB-S silicon tuner
  *
  * Copyright (C) 2006 Tino Reichardt
@@ -157,7 +157,7 @@ static int zl10036_sleep(struct dvb_frontend *fe)
 	return ret;
 }
 
-/**
+/*
  * register map of the ZL10036/ZL10038
  *
  * reg[default] content
@@ -219,7 +219,7 @@ static int zl10036_set_bandwidth(struct zl10036_state *state, u32 fbw)
 	if (fbw <= 28820) {
 		br = _BR_MAXIMUM;
 	} else {
-		/**
+		/*
 		 *  f(bw)=34,6MHz f(xtal)=10.111MHz
 		 *  br = (10111/34600) * 63 * 1/K = 14;
 		 */
@@ -315,7 +315,7 @@ static int zl10036_set_params(struct dvb_frontend *fe)
 	||  (frequency > fe->ops.info.frequency_max))
 		return -EINVAL;
 
-	/**
+	/*
 	 * alpha = 1.35 for dvb-s
 	 * fBW = (alpha*symbolrate)/(2*0.8)
 	 * 1.35 / (2*0.8) = 27 / 32

drivers/media/dvb-frontends/zl10036.h

@@ -20,20 +20,20 @@
 #include <linux/i2c.h>
 #include "dvb_frontend.h"
 
-/**
- * Attach a zl10036 tuner to the supplied frontend structure.
- *
- * @param fe Frontend to attach to.
- * @param config zl10036_config structure
- * @return FE pointer on success, NULL on failure.
- */
-
 struct zl10036_config {
 	u8 tuner_address;
 	int rf_loop_enable;
 };
 
 #if IS_REACHABLE(CONFIG_DVB_ZL10036)
+/**
+ * Attach a zl10036 tuner to the supplied frontend structure.
+ *
+ * @fe: Frontend to attach to.
+ * @config: zl10036_config structure.
+ * @i2c: pointer to struct i2c_adapter.
+ * return: FE pointer on success, NULL on failure.
+ */
 extern struct dvb_frontend *zl10036_attach(struct dvb_frontend *fe,
 	const struct zl10036_config *config, struct i2c_adapter *i2c);
 #else

drivers/media/i2c/Kconfig

@@ -676,6 +676,7 @@ config VIDEO_OV13858
 	tristate "OmniVision OV13858 sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
 	depends on MEDIA_CAMERA_SUPPORT
+	select V4L2_FWNODE
 	---help---
 	  This is a Video4Linux2 sensor-level driver for the OmniVision
 	  OV13858 camera.

drivers/media/i2c/et8ek8/Kconfig

 config VIDEO_ET8EK8
 	tristate "ET8EK8 camera sensor support"
 	depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
+	select V4L2_FWNODE
 	---help---
 	  This is a driver for the Toshiba ET8EK8 5 MP camera sensor.
 	  It is used for example in Nokia N900 (RX-51).

drivers/media/i2c/imx274.c

@@ -1770,8 +1770,7 @@ static int imx274_probe(struct i2c_client *client,
 	return 0;
 
 err_ctrls:
-	v4l2_async_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(sd->ctrl_handler);
+	v4l2_ctrl_handler_free(&imx274->ctrls.handler);
 err_me:
 	media_entity_cleanup(&sd->entity);
 err_regmap:
@@ -1788,7 +1787,7 @@ static int imx274_remove(struct i2c_client *client)
 	imx274_write_table(imx274, mode_table[IMX274_MODE_STOP_STREAM]);
 
 	v4l2_async_unregister_subdev(sd);
-	v4l2_ctrl_handler_free(sd->ctrl_handler);
+	v4l2_ctrl_handler_free(&imx274->ctrls.handler);
 	media_entity_cleanup(&sd->entity);
 	mutex_destroy(&imx274->lock);
 	return 0;

drivers/media/i2c/lm3560.c

@@ -50,6 +50,7 @@ enum led_enable {
 /**
  * struct lm3560_flash
  *
+ * @dev: pointer to &struct device
  * @pdata: platform data
  * @regmap: reg. map for i2c
  * @lock: muxtex for serial access.

drivers/media/i2c/m5mols/m5mols_capture.c

@@ -33,6 +33,10 @@
 
 /**
  * m5mols_read_rational - I2C read of a rational number
+ * @sd: sub-device, as pointed by struct v4l2_subdev
+ * @addr_num: numerator register
+ * @addr_den: denominator register
+ * @val: place to store the division result
  *
  * Read numerator and denominator from registers @addr_num and @addr_den
  * respectively and return the division result in @val.
@@ -53,6 +57,7 @@ static int m5mols_read_rational(struct v4l2_subdev *sd, u32 addr_num,
 
 /**
  * m5mols_capture_info - Gather captured image information
+ * @info: M-5MOLS driver data structure
  *
  * For now it gathers only EXIF information and file size.
  */

drivers/media/i2c/m5mols/m5mols_controls.c

@@ -126,6 +126,7 @@ static struct m5mols_scenemode m5mols_default_scenemode[] = {
 
 /**
  * m5mols_do_scenemode() - Change current scenemode
+ * @info: M-5MOLS driver data structure
  * @mode:	Desired mode of the scenemode
  *
  * WARNING: The execution order is important. Do not change the order.

drivers/media/i2c/m5mols/m5mols_core.c

@@ -114,7 +114,8 @@ static const struct m5mols_resolution m5mols_reg_res[] = {
 
 /**
  * m5mols_swap_byte - an byte array to integer conversion function
- * @size: size in bytes of I2C packet defined in the M-5MOLS datasheet
+ * @data: byte array
+ * @length: size in bytes of I2C packet defined in the M-5MOLS datasheet
  *
  * Convert I2C data byte array with performing any required byte
  * reordering to assure proper values for each data type, regardless
@@ -132,8 +133,9 @@ static u32 m5mols_swap_byte(u8 *data, u8 length)
 
 /**
  * m5mols_read -  I2C read function
- * @reg: combination of size, category and command for the I2C packet
+ * @sd: sub-device, as pointed by struct v4l2_subdev
  * @size: desired size of I2C packet
+ * @reg: combination of size, category and command for the I2C packet
  * @val: read value
  *
  * Returns 0 on success, or else negative errno.
@@ -232,6 +234,7 @@ int m5mols_read_u32(struct v4l2_subdev *sd, u32 reg, u32 *val)
 
 /**
  * m5mols_write - I2C command write function
+ * @sd: sub-device, as pointed by struct v4l2_subdev
  * @reg: combination of size, category and command for the I2C packet
  * @val: value to write
  *
@@ -284,6 +287,7 @@ int m5mols_write(struct v4l2_subdev *sd, u32 reg, u32 val)
 
 /**
  * m5mols_busy_wait - Busy waiting with I2C register polling
+ * @sd: sub-device, as pointed by struct v4l2_subdev
  * @reg: the I2C_REG() address of an 8-bit status register to check
  * @value: expected status register value
  * @mask: bit mask for the read status register value
@@ -316,6 +320,8 @@ int m5mols_busy_wait(struct v4l2_subdev *sd, u32 reg, u32 value, u32 mask,
 
 /**
  * m5mols_enable_interrupt - Clear interrupt pending bits and unmask interrupts
+ * @sd: sub-device, as pointed by struct v4l2_subdev
+ * @reg: combination of size, category and command for the I2C packet
  *
  * Before writing desired interrupt value the INT_FACTOR register should
  * be read to clear pending interrupts.
@@ -349,6 +355,8 @@ int m5mols_wait_interrupt(struct v4l2_subdev *sd, u8 irq_mask, u32 timeout)
 
 /**
  * m5mols_reg_mode - Write the mode and check busy status
+ * @sd: sub-device, as pointed by struct v4l2_subdev
+ * @mode: the required operation mode
  *
  * It always accompanies a little delay changing the M-5MOLS mode, so it is
  * needed checking current busy status to guarantee right mode.
@@ -364,6 +372,7 @@ static int m5mols_reg_mode(struct v4l2_subdev *sd, u8 mode)
 
 /**
  * m5mols_set_mode - set the M-5MOLS controller mode
+ * @info: M-5MOLS driver data structure
  * @mode: the required operation mode
  *
  * The commands of M-5MOLS are grouped into specific modes. Each functionality
@@ -421,6 +430,7 @@ int m5mols_set_mode(struct m5mols_info *info, u8 mode)
 
 /**
  * m5mols_get_version - retrieve full revisions information of M-5MOLS
+ * @sd: sub-device, as pointed by struct v4l2_subdev
  *
  * The version information includes revisions of hardware and firmware,
  * AutoFocus alghorithm version and the version string.
@@ -489,6 +499,7 @@ static enum m5mols_restype __find_restype(u32 code)
 
 /**
  * __find_resolution - Lookup preset and type of M-5MOLS's resolution
+ * @sd: sub-device, as pointed by struct v4l2_subdev
  * @mf: pixel format to find/negotiate the resolution preset for
  * @type: M-5MOLS resolution type
  * @resolution:	M-5MOLS resolution preset register value
@@ -662,6 +673,7 @@ static const struct v4l2_subdev_pad_ops m5mols_pad_ops = {
 
 /**
  * m5mols_restore_controls - Apply current control values to the registers
+ * @info: M-5MOLS driver data structure
  *
  * m5mols_do_scenemode() handles all parameters for which there is yet no
  * individual control. It should be replaced at some point by setting each
@@ -686,6 +698,7 @@ int m5mols_restore_controls(struct m5mols_info *info)
 
 /**
  * m5mols_start_monitor - Start the monitor mode
+ * @info: M-5MOLS driver data structure
  *
  * Before applying the controls setup the resolution and frame rate
  * in PARAMETER mode, and then switch over to MONITOR mode.
@@ -789,6 +802,7 @@ int __attribute__ ((weak)) m5mols_update_fw(struct v4l2_subdev *sd,
 
 /**
  * m5mols_fw_start - M-5MOLS internal ARM controller initialization
+ * @sd: sub-device, as pointed by struct v4l2_subdev
  *
  * Execute the M-5MOLS internal ARM controller initialization sequence.
  * This function should be called after the supply voltage has been
@@ -844,6 +858,8 @@ static int m5mols_auto_focus_stop(struct m5mols_info *info)
 
 /**
  * m5mols_s_power - Main sensor power control function
+ * @sd: sub-device, as pointed by struct v4l2_subdev
+ * @on: if true, powers on the device; powers off otherwise.
  *
  * To prevent breaking the lens when the sensor is powered off the Soft-Landing
  * algorithm is called where available. The Soft-Landing algorithm availability

drivers/media/i2c/ov5647.c

@@ -428,8 +428,8 @@ static int ov5647_sensor_set_register(struct v4l2_subdev *sd,
 }
 #endif
 
-/**
- * @short Subdev core operations registration
+/*
+ * Subdev core operations registration
  */
 static const struct v4l2_subdev_core_ops ov5647_subdev_core_ops = {
 	.s_power		= ov5647_sensor_power,

drivers/media/i2c/s5k6a3.c

@@ -53,6 +53,9 @@ enum {
  * @gpio_reset: GPIO connected to the sensor's reset pin
  * @lock: mutex protecting the structure's members below
  * @format: media bus format at the sensor's source pad
+ * @clock: pointer to &struct clk.
+ * @clock_frequency: clock frequency
+ * @power_count: stores state if device is powered
  */
 struct s5k6a3 {
 	struct device *dev;

drivers/media/i2c/s5k6aa.c

@@ -421,6 +421,7 @@ static int s5k6aa_set_ahb_address(struct i2c_client *client)
 
 /**
  * s5k6aa_configure_pixel_clock - apply ISP main clock/PLL configuration
+ * @s5k6aa: pointer to &struct s5k6aa describing the device
  *
  * Configure the internal ISP PLL for the required output frequency.
  * Locking: called with s5k6aa.lock mutex held.
@@ -669,6 +670,7 @@ static int s5k6aa_set_input_params(struct s5k6aa *s5k6aa)
 
 /**
  * s5k6aa_configure_video_bus - configure the video output interface
+ * @s5k6aa: pointer to &struct s5k6aa describing the device
  * @bus_type: video bus type: parallel or MIPI-CSI
  * @nlanes: number of MIPI lanes to be used (MIPI-CSI only)
  *
@@ -724,6 +726,8 @@ static int s5k6aa_new_config_sync(struct i2c_client *client, int timeout,
 
 /**
  * s5k6aa_set_prev_config - write user preview register set
+ * @s5k6aa: pointer to &struct s5k6aa describing the device
+ * @preset: s5kaa preset to be applied
  *
  * Configure output resolution and color fromat, pixel clock
  * frequency range, device frame rate type and frame period range.
@@ -777,6 +781,7 @@ static int s5k6aa_set_prev_config(struct s5k6aa *s5k6aa,
 
 /**
  * s5k6aa_initialize_isp - basic ISP MCU initialization
+ * @sd: pointer to V4L2 sub-device descriptor
  *
  * Configure AHB addresses for registers read/write; configure PLLs for
  * required output pixel clock. The ISP power supply needs to be already

drivers/media/i2c/tvp514x.c

@@ -86,6 +86,7 @@ static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable);
 /**
  * struct tvp514x_decoder - TVP5146/47 decoder object
  * @sd: Subdevice Slave handle
+ * @hdl: embedded &struct v4l2_ctrl_handler
  * @tvp514x_regs: copy of hw's regs with preset values.
  * @pdata: Board specific
  * @ver: Chip version
@@ -98,6 +99,9 @@ static int tvp514x_s_stream(struct v4l2_subdev *sd, int enable);
  * @std_list: Standards list
  * @input: Input routing at chip level
  * @output: Output routing at chip level
+ * @pad: subdev media pad associated with the decoder
+ * @format: media bus frame format
+ * @int_seq: driver's register init sequence
  */
 struct tvp514x_decoder {
 	struct v4l2_subdev sd;
@@ -211,7 +215,7 @@ static struct tvp514x_reg tvp514x_reg_list_default[] = {
 	{TOK_TERM, 0, 0},
 };
 
-/**
+/*
  * List of image formats supported by TVP5146/47 decoder
  * Currently we are using 8 bit mode only, but can be
  * extended to 10/20 bit mode.
@@ -226,7 +230,7 @@ static const struct v4l2_fmtdesc tvp514x_fmt_list[] = {
 	},
 };
 
-/**
+/*
  * Supported standards -
  *
  * Currently supports two standards only, need to add support for rest of the
@@ -931,7 +935,7 @@ static int tvp514x_get_pad_format(struct v4l2_subdev *sd,
  * tvp514x_set_pad_format() - V4L2 decoder interface handler for set pad format
  * @sd: pointer to standard V4L2 sub-device structure
  * @cfg: pad configuration
- * @format: pointer to v4l2_subdev_format structure
+ * @fmt: pointer to v4l2_subdev_format structure
  *
  * Set pad format for the output pad
  */
@@ -1199,7 +1203,7 @@ static const struct tvp514x_reg tvp514xm_init_reg_seq[] = {
 	{TOK_TERM, 0, 0},
 };
 
-/**
+/*
  * I2C Device Table -
  *
  * name - Name of the actual device/chip.

drivers/media/pci/solo6x10/solo6x10-enc.c

@@ -175,7 +175,7 @@ int solo_osd_print(struct solo_enc_dev *solo_enc)
 	return 0;
 }
 
-/**
+/*
  * Set channel Quality Profile (0-3).
  */
 void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch,