[ARM] pxa: move I2C pin configurations out into board specific files

Signed-off-by: NEric Miao <eric.miao@marvell.com>

arch/arm/mach-pxa/cm-x300.c

@@ -136,6 +136,10 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
+
+	/* Standard I2C */
+	GPIO21_I2C_SCL,
+	GPIO22_I2C_SDA,
 };
 
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)

arch/arm/mach-pxa/devices.c

@@ -10,7 +10,6 @@
 #include <mach/mmc.h>
 #include <mach/irda.h>
 #include <mach/i2c.h>
-#include <mach/mfp-pxa27x.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
@@ -249,15 +248,8 @@ struct platform_device pxa_device_i2c = {
 	.num_resources	= ARRAY_SIZE(pxai2c_resources),
 };
 
-static unsigned long pxa27x_i2c_mfp_cfg[] = {
-	GPIO117_I2C_SCL,
-	GPIO118_I2C_SDA,
-};
-
 void __init pxa_set_i2c_info(struct i2c_pxa_platform_data *info)
 {
-	if (cpu_is_pxa27x())
-		pxa2xx_mfp_config(ARRAY_AND_SIZE(pxa27x_i2c_mfp_cfg));
 	pxa_register_device(&pxa_device_i2c, info);
 }
 

arch/arm/mach-pxa/ezx.c

@@ -112,6 +112,10 @@ static unsigned long ezx_pin_config[] __initdata = {
 	GPIO91_USB_P3_1,	/* ICL_XRXD */
 	GPIO56_USB_P3_4,	/* ICL_VMOUT */
 	GPIO113_USB_P3_3,	/* /ICL_VMIN */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
 };
 
 static void __init ezx_init(void)

arch/arm/mach-pxa/magician.c

@@ -123,6 +123,10 @@ static unsigned long magician_pin_config[] __initdata = {
 	GPIO107_GPIO,	/* DS1WM_IRQ */
 	GPIO108_GPIO,	/* GSM_READY */
 	GPIO115_GPIO,	/* nPEN_IRQ */
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
 };
 
 /*

arch/arm/mach-pxa/mainstone.c

@@ -128,6 +128,10 @@ static unsigned long mainstone_pin_config[] = {
 	GPIO108_KP_MKOUT_5,
 	GPIO96_KP_MKOUT_6,
 
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
 	/* GPIO */
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
 };

arch/arm/mach-pxa/pcm990-baseboard.c

@@ -55,6 +55,10 @@ static unsigned long pcm990_pin_config[] __initdata = {
 	GPIO89_USBH1_PEN,
 	/* PWM0 */
 	GPIO16_PWM0_OUT,
+
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
 };
 
 /*

arch/arm/mach-pxa/spitz.c

@@ -122,6 +122,10 @@ static unsigned long spitz_pin_config[] __initdata = {
 	GPIO105_GPIO,	/* SPITZ_GPIO_CF_IRQ */
 	GPIO106_GPIO,	/* SPITZ_GPIO_CF2_IRQ */
 
+	/* I2C */
+	GPIO117_I2C_SCL,
+	GPIO118_I2C_SDA,
+
 	GPIO1_GPIO | WAKEUP_ON_EDGE_RISE,
 };