x86: actually merge <asm/alternative.h>

This actually merges <asm-x86/alternative_{32,64}.h> into
<asm-x86/alternative.h>.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

include/asm-x86/alternative.h

-#ifdef CONFIG_X86_32
-# include "alternative_32.h"
+#ifndef _ASM_X86_ALTERNATIVE_H
+#define _ASM_X86_ALTERNATIVE_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <asm/asm.h>
+
+/*
+ * Alternative inline assembly for SMP.
+ *
+ * The LOCK_PREFIX macro defined here replaces the LOCK and
+ * LOCK_PREFIX macros used everywhere in the source tree.
+ *
+ * SMP alternatives use the same data structures as the other
+ * alternatives and the X86_FEATURE_UP flag to indicate the case of a
+ * UP system running a SMP kernel.  The existing apply_alternatives()
+ * works fine for patching a SMP kernel for UP.
+ *
+ * The SMP alternative tables can be kept after boot and contain both
+ * UP and SMP versions of the instructions to allow switching back to
+ * SMP at runtime, when hotplugging in a new CPU, which is especially
+ * useful in virtualized environments.
+ *
+ * The very common lock prefix is handled as special case in a
+ * separate table which is a pure address list without replacement ptr
+ * and size information.  That keeps the table sizes small.
+ */
+
+#ifdef CONFIG_SMP
+#define LOCK_PREFIX \
+		".section .smp_locks,\"a\"\n"	\
+		_ASM_ALIGN "\n"			\
+		_ASM_PTR "661f\n" /* address */	\
+		".previous\n"			\
+		"661:\n\tlock; "
+
+#else /* ! CONFIG_SMP */
+#define LOCK_PREFIX ""
+#endif
+
+/* This must be included *after* the definition of LOCK_PREFIX */
+#include <asm/cpufeature.h>
+
+struct alt_instr {
+	u8 *instr;		/* original instruction */
+	u8 *replacement;
+	u8  cpuid;		/* cpuid bit set for replacement */
+	u8  instrlen;		/* length of original instruction */
+	u8  replacementlen;	/* length of new instruction, <= instrlen */
+	u8  pad1;
+#ifdef CONFIG_X86_64
+	u32 pad2;
+#endif
+};
+
+extern void alternative_instructions(void);
+extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
+
+struct module;
+
+#ifdef CONFIG_SMP
+extern void alternatives_smp_module_add(struct module *mod, char *name,
+					void *locks, void *locks_end,
+					void *text, void *text_end);
+extern void alternatives_smp_module_del(struct module *mod);
+extern void alternatives_smp_switch(int smp);
+#else
+static inline void alternatives_smp_module_add(struct module *mod, char *name,
+					void *locks, void *locks_end,
+					void *text, void *text_end) {}
+static inline void alternatives_smp_module_del(struct module *mod) {}
+static inline void alternatives_smp_switch(int smp) {}
+#endif	/* CONFIG_SMP */
+
+/*
+ * Alternative instructions for different CPU types or capabilities.
+ *
+ * This allows to use optimized instructions even on generic binary
+ * kernels.
+ *
+ * length of oldinstr must be longer or equal the length of newinstr
+ * It can be padded with nops as needed.
+ *
+ * For non barrier like inlines please define new variants
+ * without volatile and memory clobber.
+ */
+#define alternative(oldinstr, newinstr, feature)			\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      _ASM_ALIGN "\n"					\
+		      _ASM_PTR "661b\n"		/* label */		\
+		      _ASM_PTR "663f\n"		/* new instruction */	\
+		      "	 .byte %c0\n"		/* feature bit */	\
+		      "	 .byte 662b-661b\n"	/* sourcelen */		\
+		      "	 .byte 664f-663f\n"	/* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
+		      ".previous" :: "i" (feature) : "memory")
+
+/*
+ * Alternative inline assembly with input.
+ *
+ * Pecularities:
+ * No memory clobber here.
+ * Argument numbers start with 1.
+ * Best is to use constraints that are fixed size (like (%1) ... "r")
+ * If you use variable sized constraints like "m" or "g" in the
+ * replacement make sure to pad to the worst case length.
+ */
+#define alternative_input(oldinstr, newinstr, feature, input...)	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      _ASM_ALIGN "\n"					\
+		      _ASM_PTR "661b\n"		/* label */		\
+		      _ASM_PTR "663f\n"		/* new instruction */	\
+		      "	 .byte %c0\n"		/* feature bit */	\
+		      "	 .byte 662b-661b\n"	/* sourcelen */		\
+		      "	 .byte 664f-663f\n"	/* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
+		      ".previous" :: "i" (feature), ##input)
+
+/* Like alternative_input, but with a single output argument */
+#define alternative_io(oldinstr, newinstr, feature, output, input...)	\
+	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
+		      ".section .altinstructions,\"a\"\n"		\
+		      _ASM_ALIGN "\n"					\
+		      _ASM_PTR "661b\n"		/* label */		\
+		      _ASM_PTR "663f\n"		/* new instruction */	\
+		      "	 .byte %c[feat]\n"	/* feature bit */	\
+		      "	 .byte 662b-661b\n"	/* sourcelen */		\
+		      "	 .byte 664f-663f\n"	/* replacementlen */	\
+		      ".previous\n"					\
+		      ".section .altinstr_replacement,\"ax\"\n"		\
+		      "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
+		      ".previous" : output : [feat] "i" (feature), ##input)
+
+/*
+ * use this macro(s) if you need more than one output parameter
+ * in alternative_io
+ */
+#define ASM_OUTPUT2(a, b) a, b
+
+struct paravirt_patch_site;
+#ifdef CONFIG_PARAVIRT
+void apply_paravirt(struct paravirt_patch_site *start,
+		    struct paravirt_patch_site *end);
 #else
-# include "alternative_64.h"
+static inline void
+apply_paravirt(struct paravirt_patch_site *start,
+	       struct paravirt_patch_site *end)
+{}
+#define __parainstructions	NULL
+#define __parainstructions_end	NULL
 #endif
+
+extern void text_poke(void *addr, unsigned char *opcode, int len);
+
+#endif /* _ASM_X86_ALTERNATIVE_H */

include/asm-x86/alternative_32.h

-#ifndef _I386_ALTERNATIVE_H
-#define _I386_ALTERNATIVE_H
-
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <asm/asm.h>
-
-/*
- * Alternative inline assembly for SMP.
- *
- * The LOCK_PREFIX macro defined here replaces the LOCK and
- * LOCK_PREFIX macros used everywhere in the source tree.
- *
- * SMP alternatives use the same data structures as the other
- * alternatives and the X86_FEATURE_UP flag to indicate the case of a
- * UP system running a SMP kernel.  The existing apply_alternatives()
- * works fine for patching a SMP kernel for UP.
- *
- * The SMP alternative tables can be kept after boot and contain both
- * UP and SMP versions of the instructions to allow switching back to
- * SMP at runtime, when hotplugging in a new CPU, which is especially
- * useful in virtualized environments.
- *
- * The very common lock prefix is handled as special case in a
- * separate table which is a pure address list without replacement ptr
- * and size information.  That keeps the table sizes small.
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX \
-		".section .smp_locks,\"a\"\n"	\
-		_ASM_ALIGN "\n"			\
-		_ASM_PTR "661f\n" /* address */	\
-		".previous\n"			\
-		"661:\n\tlock; "
-
-#else /* ! CONFIG_SMP */
-#define LOCK_PREFIX ""
-#endif
-
-/* This must be included *after* the definition of LOCK_PREFIX */
-#include <asm/cpufeature.h>
-
-struct alt_instr {
-	u8 *instr;		/* original instruction */
-	u8 *replacement;
-	u8  cpuid;		/* cpuid bit set for replacement */
-	u8  instrlen;		/* length of original instruction */
-	u8  replacementlen;	/* length of new instruction, <= instrlen */
-	u8  pad1;
-#ifdef CONFIG_X86_64
-	u32 pad2;
-#endif
-};
-
-extern void alternative_instructions(void);
-extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
-
-struct module;
-
-#ifdef CONFIG_SMP
-extern void alternatives_smp_module_add(struct module *mod, char *name,
-					void *locks, void *locks_end,
-					void *text, void *text_end);
-extern void alternatives_smp_module_del(struct module *mod);
-extern void alternatives_smp_switch(int smp);
-#else
-static inline void alternatives_smp_module_add(struct module *mod, char *name,
-					void *locks, void *locks_end,
-					void *text, void *text_end) {}
-static inline void alternatives_smp_module_del(struct module *mod) {}
-static inline void alternatives_smp_switch(int smp) {}
-#endif	/* CONFIG_SMP */
-
-/*
- * Alternative instructions for different CPU types or capabilities.
- *
- * This allows to use optimized instructions even on generic binary
- * kernels.
- *
- * length of oldinstr must be longer or equal the length of newinstr
- * It can be padded with nops as needed.
- *
- * For non barrier like inlines please define new variants
- * without volatile and memory clobber.
- */
-#define alternative(oldinstr, newinstr, feature)			\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature) : "memory")
-
-/*
- * Alternative inline assembly with input.
- *
- * Pecularities:
- * No memory clobber here.
- * Argument numbers start with 1.
- * Best is to use constraints that are fixed size (like (%1) ... "r")
- * If you use variable sized constraints like "m" or "g" in the
- * replacement make sure to pad to the worst case length.
- */
-#define alternative_input(oldinstr, newinstr, feature, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature), ##input)
-
-/* Like alternative_input, but with a single output argument */
-#define alternative_io(oldinstr, newinstr, feature, output, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c[feat]\n"	/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
-		      ".previous" : output : [feat] "i" (feature), ##input)
-
-/*
- * use this macro(s) if you need more than one output parameter
- * in alternative_io
- */
-#define ASM_OUTPUT2(a, b) a, b
-
-struct paravirt_patch_site;
-#ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch_site *start,
-		    struct paravirt_patch_site *end);
-#else
-static inline void
-apply_paravirt(struct paravirt_patch_site *start,
-	       struct paravirt_patch_site *end)
-{}
-#define __parainstructions	NULL
-#define __parainstructions_end	NULL
-#endif
-
-extern void text_poke(void *addr, unsigned char *opcode, int len);
-
-#endif /* _I386_ALTERNATIVE_H */

include/asm-x86/alternative_64.h

-#ifndef _X86_64_ALTERNATIVE_H
-#define _X86_64_ALTERNATIVE_H
-
-#include <linux/types.h>
-#include <linux/stddef.h>
-#include <asm/asm.h>
-
-/*
- * Alternative inline assembly for SMP.
- *
- * The LOCK_PREFIX macro defined here replaces the LOCK and
- * LOCK_PREFIX macros used everywhere in the source tree.
- *
- * SMP alternatives use the same data structures as the other
- * alternatives and the X86_FEATURE_UP flag to indicate the case of a
- * UP system running a SMP kernel.  The existing apply_alternatives()
- * works fine for patching a SMP kernel for UP.
- *
- * The SMP alternative tables can be kept after boot and contain both
- * UP and SMP versions of the instructions to allow switching back to
- * SMP at runtime, when hotplugging in a new CPU, which is especially
- * useful in virtualized environments.
- *
- * The very common lock prefix is handled as special case in a
- * separate table which is a pure address list without replacement ptr
- * and size information.  That keeps the table sizes small.
- */
-
-#ifdef CONFIG_SMP
-#define LOCK_PREFIX \
-		".section .smp_locks,\"a\"\n"	\
-		_ASM_ALIGN "\n"			\
-		_ASM_PTR "661f\n" /* address */	\
-		".previous\n"			\
-		"661:\n\tlock; "
-
-#else /* ! CONFIG_SMP */
-#define LOCK_PREFIX ""
-#endif
-
-/* This must be included *after* the definition of LOCK_PREFIX */
-#include <asm/cpufeature.h>
-
-struct alt_instr {
-	u8 *instr;		/* original instruction */
-	u8 *replacement;
-	u8  cpuid;		/* cpuid bit set for replacement */
-	u8  instrlen;		/* length of original instruction */
-	u8  replacementlen;	/* length of new instruction, <= instrlen */
-	u8  pad1;
-#ifdef CONFIG_X86_64
-	u32 pad2;
-#endif
-};
-
-extern void alternative_instructions(void);
-extern void apply_alternatives(struct alt_instr *start, struct alt_instr *end);
-
-struct module;
-
-#ifdef CONFIG_SMP
-extern void alternatives_smp_module_add(struct module *mod, char *name,
-					void *locks, void *locks_end,
-					void *text, void *text_end);
-extern void alternatives_smp_module_del(struct module *mod);
-extern void alternatives_smp_switch(int smp);
-#else
-static inline void alternatives_smp_module_add(struct module *mod, char *name,
-					void *locks, void *locks_end,
-					void *text, void *text_end) {}
-static inline void alternatives_smp_module_del(struct module *mod) {}
-static inline void alternatives_smp_switch(int smp) {}
-#endif	/* CONFIG_SMP */
-
-/*
- * Alternative instructions for different CPU types or capabilities.
- *
- * This allows to use optimized instructions even on generic binary
- * kernels.
- *
- * length of oldinstr must be longer or equal the length of newinstr
- * It can be padded with nops as needed.
- *
- * For non barrier like inlines please define new variants
- * without volatile and memory clobber.
- */
-#define alternative(oldinstr, newinstr, feature)			\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature) : "memory")
-
-/*
- * Alternative inline assembly with input.
- *
- * Pecularities:
- * No memory clobber here.
- * Argument numbers start with 1.
- * Best is to use constraints that are fixed size (like (%1) ... "r")
- * If you use variable sized constraints like "m" or "g" in the
- * replacement make sure to pad to the worst case length.
- */
-#define alternative_input(oldinstr, newinstr, feature, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c0\n"		/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */	\
-		      ".previous" :: "i" (feature), ##input)
-
-/* Like alternative_input, but with a single output argument */
-#define alternative_io(oldinstr, newinstr, feature, output, input...)	\
-	asm volatile ("661:\n\t" oldinstr "\n662:\n"			\
-		      ".section .altinstructions,\"a\"\n"		\
-		      _ASM_ALIGN "\n"					\
-		      _ASM_PTR "661b\n"		/* label */		\
-		      _ASM_PTR "663f\n"		/* new instruction */	\
-		      "	 .byte %c[feat]\n"	/* feature bit */	\
-		      "	 .byte 662b-661b\n"	/* sourcelen */		\
-		      "	 .byte 664f-663f\n"	/* replacementlen */	\
-		      ".previous\n"					\
-		      ".section .altinstr_replacement,\"ax\"\n"		\
-		      "663:\n\t" newinstr "\n664:\n"  /* replacement */ \
-		      ".previous" : output : [feat] "i" (feature), ##input)
-
-/*
- * use this macro(s) if you need more than one output parameter
- * in alternative_io
- */
-#define ASM_OUTPUT2(a, b) a, b
-
-struct paravirt_patch_site;
-#ifdef CONFIG_PARAVIRT
-void apply_paravirt(struct paravirt_patch_site *start,
-		    struct paravirt_patch_site *end);
-#else
-static inline void
-apply_paravirt(struct paravirt_patch_site *start,
-	       struct paravirt_patch_site *end)
-{}
-#define __parainstructions	NULL
-#define __parainstructions_end	NULL
-#endif
-
-extern void text_poke(void *addr, unsigned char *opcode, int len);
-
-#endif /* _X86_64_ALTERNATIVE_H */