ARM: dts: imx: add IMX50 SoC device tree

Create device tree source for the Freescale IMX50 SoC. This was based on
the IMX53 source with changes made as necessary.
Signed-off-by: NGreg Ungerer <gerg@uclinux.org>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx50.dtsi

+/*
+ * Copyright 2013 Greg Ungerer <gerg@uclinux.org>
+ * Copyright 2011 Freescale Semiconductor, Inc.
+ * Copyright 2011 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include "skeleton.dtsi"
+#include "imx50-pinfunc.h"
+
+/ {
+	aliases {
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		gpio5 = &gpio6;
+		serial0 = &uart1;
+		serial1 = &uart2;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a8";
+			reg = <0x0>;
+		};
+	};
+
+	tzic: tz-interrupt-controller@0fffc000 {
+		compatible = "fsl,imx50-tzic", "fsl,imx53-tzic", "fsl,tzic";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x0fffc000 0x4000>;
+	};
+
+	clocks {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ckil {
+			compatible = "fsl,imx-ckil", "fixed-clock";
+			clock-frequency = <32768>;
+		};
+
+		ckih1 {
+			compatible = "fsl,imx-ckih1", "fixed-clock";
+			clock-frequency = <22579200>;
+		};
+
+		ckih2 {
+			compatible = "fsl,imx-ckih2", "fixed-clock";
+			clock-frequency = <0>;
+		};
+
+		osc {
+			compatible = "fsl,imx-osc", "fixed-clock";
+			clock-frequency = <24000000>;
+		};
+	};
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&tzic>;
+		ranges;
+
+		aips@50000000 { /* AIPS1 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x50000000 0x10000000>;
+			ranges;
+
+			spba@50000000 {
+				compatible = "fsl,spba-bus", "simple-bus";
+				#address-cells = <1>;
+				#size-cells = <1>;
+				reg = <0x50000000 0x40000>;
+				ranges;
+
+				esdhc1: esdhc@50004000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50004000 0x4000>;
+					interrupts = <1>;
+					clocks = <&clks 44>, <&clks 0>, <&clks 71>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc2: esdhc@50008000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50008000 0x4000>;
+					interrupts = <2>;
+					clocks = <&clks 45>, <&clks 0>, <&clks 72>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				uart3: serial@5000c000 {
+					compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+					reg = <0x5000c000 0x4000>;
+					interrupts = <33>;
+					clocks = <&clks 32>, <&clks 33>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ecspi1: ecspi@50010000 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+					reg = <0x50010000 0x4000>;
+					interrupts = <36>;
+					clocks = <&clks 51>, <&clks 52>;
+					clock-names = "ipg", "per";
+					status = "disabled";
+				};
+
+				ssi2: ssi@50014000 {
+					compatible = "fsl,imx50-ssi", "fsl,imx21-ssi";
+					reg = <0x50014000 0x4000>;
+					interrupts = <30>;
+					clocks = <&clks 49>;
+					fsl,fifo-depth = <15>;
+					fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */
+					status = "disabled";
+				};
+
+				esdhc3: esdhc@50020000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50020000 0x4000>;
+					interrupts = <3>;
+					clocks = <&clks 46>, <&clks 0>, <&clks 73>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+
+				esdhc4: esdhc@50024000 {
+					compatible = "fsl,imx50-esdhc";
+					reg = <0x50024000 0x4000>;
+					interrupts = <4>;
+					clocks = <&clks 47>, <&clks 0>, <&clks 74>;
+					clock-names = "ipg", "ahb", "per";
+					bus-width = <4>;
+					status = "disabled";
+				};
+			};
+
+			usbotg: usb@53f80000 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80000 0x0200>;
+				interrupts = <18>;
+				clocks = <&clks 124>;
+				status = "disabled";
+			};
+
+			usbh1: usb@53f80200 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80200 0x0200>;
+				interrupts = <14>;
+				clocks = <&clks 125>;
+				status = "disabled";
+			};
+
+			usbh2: usb@53f80400 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80400 0x0200>;
+				interrupts = <16>;
+				clocks = <&clks 108>;
+				status = "disabled";
+			};
+
+			usbh3: usb@53f80600 {
+				compatible = "fsl,imx50-usb", "fsl,imx27-usb";
+				reg = <0x53f80600 0x0200>;
+				interrupts = <17>;
+				clocks = <&clks 108>;
+				status = "disabled";
+			};
+
+			gpio1: gpio@53f84000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f84000 0x4000>;
+				interrupts = <50 51>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio2: gpio@53f88000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f88000 0x4000>;
+				interrupts = <52 53>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio3: gpio@53f8c000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f8c000 0x4000>;
+				interrupts = <54 55>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio4: gpio@53f90000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53f90000 0x4000>;
+				interrupts = <56 57>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			wdog1: wdog@53f98000 {
+				compatible = "fsl,imx50-wdt", "fsl,imx21-wdt";
+				reg = <0x53f98000 0x4000>;
+				interrupts = <58>;
+				clocks = <&clks 0>;
+			};
+
+			gpt: timer@53fa0000 {
+				compatible = "fsl,imx50-gpt", "fsl,imx31-gpt";
+				reg = <0x53fa0000 0x4000>;
+				interrupts = <39>;
+				clocks = <&clks 36>, <&clks 41>;
+				clock-names = "ipg", "per";
+			};
+
+			iomuxc: iomuxc@53fa8000 {
+				compatible = "fsl,imx50-iomuxc", "fsl,imx53-iomuxc";
+				reg = <0x53fa8000 0x4000>;
+			};
+
+			gpr: iomuxc-gpr@53fa8000 {
+				compatible = "fsl,imx50-iomuxc-gpr", "syscon";
+				reg = <0x53fa8000 0xc>;
+			};
+
+			pwm1: pwm@53fb4000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb4000 0x4000>;
+				clocks = <&clks 37>, <&clks 38>;
+				clock-names = "ipg", "per";
+				interrupts = <61>;
+			};
+
+			pwm2: pwm@53fb8000 {
+				#pwm-cells = <2>;
+				compatible = "fsl,imx50-pwm", "fsl,imx27-pwm";
+				reg = <0x53fb8000 0x4000>;
+				clocks = <&clks 39>, <&clks 40>;
+				clock-names = "ipg", "per";
+				interrupts = <94>;
+			};
+
+			uart1: serial@53fbc000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fbc000 0x4000>;
+				interrupts = <31>;
+				clocks = <&clks 28>, <&clks 29>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			uart2: serial@53fc0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53fc0000 0x4000>;
+				interrupts = <32>;
+				clocks = <&clks 30>, <&clks 31>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			src: src@53fd0000 {
+				compatible = "fsl,imx50-src", "fsl,imx51-src";
+				reg = <0x53fd0000 0x4000>;
+				#reset-cells = <1>;
+			};
+
+			clks: ccm@53fd4000{
+				compatible = "fsl,imx50-ccm";
+				reg = <0x53fd4000 0x4000>;
+				interrupts = <0 71 0x04 0 72 0x04>;
+				#clock-cells = <1>;
+			};
+
+			gpio5: gpio@53fdc000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fdc000 0x4000>;
+				interrupts = <103 104>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			gpio6: gpio@53fe0000 {
+				compatible = "fsl,imx50-gpio", "fsl,imx35-gpio";
+				reg = <0x53fe0000 0x4000>;
+				interrupts = <105 106>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+			};
+
+			i2c3: i2c@53fec000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x53fec000 0x4000>;
+				interrupts = <64>;
+				clocks = <&clks 88>;
+				status = "disabled";
+			};
+
+			uart4: serial@53ff0000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x53ff0000 0x4000>;
+				interrupts = <13>;
+				clocks = <&clks 65>, <&clks 66>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+		};
+
+		aips@60000000 {	/* AIPS2 */
+			compatible = "fsl,aips-bus", "simple-bus";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x60000000 0x10000000>;
+			ranges;
+
+			uart5: serial@63f90000 {
+				compatible = "fsl,imx50-uart", "fsl,imx21-uart";
+				reg = <0x63f90000 0x4000>;
+				interrupts = <86>;
+				clocks = <&clks 67>, <&clks 68>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			owire: owire@63fa4000 {
+				compatible = "fsl,imx50-owire", "fsl,imx21-owire";
+				reg = <0x63fa4000 0x4000>;
+				clocks = <&clks 159>;
+				status = "disabled";
+			};
+
+			ecspi2: ecspi@63fac000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-ecspi", "fsl,imx51-ecspi";
+				reg = <0x63fac000 0x4000>;
+				interrupts = <37>;
+				clocks = <&clks 53>, <&clks 54>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			sdma: sdma@63fb0000 {
+				compatible = "fsl,imx50-sdma", "fsl,imx35-sdma";
+				reg = <0x63fb0000 0x4000>;
+				interrupts = <6>;
+				clocks = <&clks 56>, <&clks 56>;
+				clock-names = "ipg", "ahb";
+				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
+			};
+
+			cspi: cspi@63fc0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-cspi", "fsl,imx35-cspi";
+				reg = <0x63fc0000 0x4000>;
+				interrupts = <38>;
+				clocks = <&clks 55>, <&clks 55>;
+				clock-names = "ipg", "per";
+				status = "disabled";
+			};
+
+			i2c2: i2c@63fc4000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc4000 0x4000>;
+				interrupts = <63>;
+				clocks = <&clks 35>;
+				status = "disabled";
+			};
+
+			i2c1: i2c@63fc8000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx50-i2c", "fsl,imx21-i2c";
+				reg = <0x63fc8000 0x4000>;
+				interrupts = <62>;
+				clocks = <&clks 34>;
+				status = "disabled";
+			};
+
+			ssi1: ssi@63fcc000 {
+				compatible = "fsl,imx50-ssi", "fsl,imx21-ssi";
+				reg = <0x63fcc000 0x4000>;
+				interrupts = <29>;
+				clocks = <&clks 48>;
+				fsl,fifo-depth = <15>;
+				fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */
+				status = "disabled";
+			};
+
+			audmux: audmux@63fd0000 {
+				compatible = "fsl,imx50-audmux", "fsl,imx31-audmux";
+				reg = <0x63fd0000 0x4000>;
+				status = "disabled";
+			};
+
+			fec: ethernet@63fec000 {
+				compatible = "fsl,imx53-fec", "fsl,imx25-fec";
+				reg = <0x63fec000 0x4000>;
+				interrupts = <87>;
+				clocks = <&clks 42>, <&clks 42>, <&clks 42>;
+				clock-names = "ipg", "ahb", "ptp";
+				status = "disabled";
+			};
+		};
+	};
+};