提交 6462c616 编写于 作者: T Thomas Reitmayr 提交者: Nicolas Pitre

[ARM] orion5x: Change names of defines for Reset-Out-Mask register

The name of the define for the Reset-Out-Mask register as well as its
bit for the watchdog reset are changed to match the names used for
Kirkwood (which in turn match the processor specification more
closely). There is no functional change.

This patch prepares for adding orion5x_wdt as a platform device to
Kirkwood.
Signed-off-by: NThomas Reitmayr <treitmayr@devbase.at>
Signed-off-by: NNicolas Pitre <nico@marvell.com>
上级 e8b2b7ba
......@@ -17,8 +17,8 @@
#define CPU_CTRL (ORION5X_BRIDGE_VIRT_BASE | 0x104)
#define CPU_RESET_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
#define WDT_RESET 0x0002
#define RSTOUTn_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x108)
#define WDT_RESET_OUT_EN 0x0002
#define CPU_SOFT_RESET (ORION5X_BRIDGE_VIRT_BASE | 0x10c)
......
......@@ -23,7 +23,7 @@ static inline void arch_reset(char mode, const char *cmd)
/*
* Enable and issue soft reset
*/
orion5x_setbits(CPU_RESET_MASK, (1 << 2));
orion5x_setbits(RSTOUTn_MASK, (1 << 2));
orion5x_setbits(CPU_SOFT_RESET, 1);
}
......
......@@ -181,9 +181,9 @@ static void mss2_power_off(void)
/*
* Enable and issue soft reset
*/
reg = readl(CPU_RESET_MASK);
reg = readl(RSTOUTn_MASK);
reg |= 1 << 2;
writel(reg, CPU_RESET_MASK);
writel(reg, RSTOUTn_MASK);
reg = readl(CPU_SOFT_RESET);
reg |= 1;
......
......@@ -73,9 +73,9 @@ static void orion5x_wdt_enable(void)
writel(reg, TIMER_CTRL);
/* Enable reset on watchdog */
reg = readl(CPU_RESET_MASK);
reg |= WDT_RESET;
writel(reg, CPU_RESET_MASK);
reg = readl(RSTOUTn_MASK);
reg |= WDT_RESET_OUT_EN;
writel(reg, RSTOUTn_MASK);
spin_unlock(&wdt_lock);
}
......@@ -87,9 +87,9 @@ static void orion5x_wdt_disable(void)
spin_lock(&wdt_lock);
/* Disable reset on watchdog */
reg = readl(CPU_RESET_MASK);
reg &= ~WDT_RESET;
writel(reg, CPU_RESET_MASK);
reg = readl(RSTOUTn_MASK);
reg &= ~WDT_RESET_OUT_EN;
writel(reg, RSTOUTn_MASK);
/* Disable watchdog timer */
reg = readl(TIMER_CTRL);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册